Patchwork 3.9-rc1: pciehp and eSATA card SiI 3132, no XHCI

login
register
mail settings
Submitter Martin Mokrejs
Date March 12, 2013, 1 a.m.
Message ID <513E7E1E.80508@fold.natur.cuni.cz>
Download mbox | patch
Permalink /patch/226740/
State Not Applicable
Headers show

Comments

Martin Mokrejs - March 12, 2013, 1 a.m.
Hi,
  I cold-booted a computer with the card inserted before power-on and collected
lspci output and express card slot status every second. Then I tried eject and
hotplug inserts and it appearts the card is not detected, actually maybe pciehp
is not even suppoosed to work in this case as the slot was occupied during boot.
But let me come to it later.

I noted the following on the very first eject of the so far cold-plugged card
that lspci properly reports PresDet change on the Changed: line. The only time
I ever saw it. ;-)
However, for any following inserts and ejects the value is not updated but slot
status bits are updated. I had BIOS defaults loaded and additionally, disabled
MediaCardReader.

The slot status bits read by setpci were changing in this path:
card in slot and cold boot 0040 -> eject 0100 hotplug insert -> 0140 eject -> 0100 hotplug insert -> 0140 eject -> 0100






Sadly, although the very first eject was notified the sata_sila24 neither
did "release" the device nor did it complain that it suddenly disappeared.
That was so far always in dmesg output (like for example):

[  251.632928] sata_sil24 0000:11:00.0: PME# disabled
[  251.636498] sata_sil24: IRQ status == 0xffffffff, PCI fault or device removal?


I re-plugged the card and ejected several times while the while loops
collecting lspci and slot_status via the setpci shell command harvested
data. Still, in dmesg there was nothing logged regarding card insert/eject.
Eventually, I tried rmmod sata_sil24 (did NOT need 'rmmod -f') and that
did log something new.

[  529.571040] ata8.00: disabled
[  529.576365] sd 7:0:0:0: [sdb] Synchronizing SCSI cache
[  529.577202] sd 7:0:0:0: [sdb]  
[  529.577204] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  529.577205] sd 7:0:0:0: [sdb] Stopping disk
[  529.577251] sd 7:0:0:0: [sdb] START_STOP FAILED
[  529.577253] sd 7:0:0:0: [sdb]  
[  529.577254] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  529.578309] sata_sil24: IRQ status == 0xffffffff, PCI fault or device removal?
[  605.818905] sata_sil24 0000:11:00.0: version 1.1
[  605.818923] sata_sil24 0000:11:00.0: enabling device (0000 -> 0003)
[  605.914722] sata_sil24 0000:11:00.0: failed to clear port RST
[  606.014860] sata_sil24 0000:11:00.0: failed to clear port RST
[  606.014882] sata_sil24 0000:11:00.0: enabling bus mastering
[  606.017741] scsi8 : sata_sil24
[  606.019388] scsi9 : sata_sil24
[  606.019898] ata9: SATA max UDMA/100 host m128@0xf6c84000 port 0xf6c80000 irq 19
[  606.019902] ata10: SATA max UDMA/100 host m128@0xf6c84000 port 0xf6c82000 irq 19
[  606.115003] ata9: controller in dubious state, performing PORT_RST
[  608.327747] ata9: SATA link down (SStatus FFFFFFFF SControl FFFFFFFF)
[  608.427847] ata10: controller in dubious state, performing PORT_RST
[  610.640619] ata10: SATA link down (SStatus FFFFFFFF SControl FFFFFFFF)




Finally, I am tempted to say that pciehp does not work at all under 3.9-rc1
if the slot was occupied during boot. It does NOT contain the usual debug
info spanning several lines and it only said:

[    2.109629] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.110225] pciehp: pcie_port_service_register = 0
[    2.110226] pciehp: PCI Express Hot Plug Controller Driver version: 0.4

If that is intentional the driver should complain loudly. Please educate me
what those "[virtual] Expansion ROM's" were in lspci above and whether those
"[disabled]" memory ranges relate to that as well. If the card is not thought
to be present or just not recognized ... why is that printed in lspci at all?
Similarly, what can you tell me if lspci output shows only:

Latency: 0

or even lacks the whole "Latency" line altoghether, is that also a disabled device?

I believe in working cases there is "Latency: 0, Cache Line Size: 64 bytes" instead.



Details and raw files at: http://195.113.57.32/~mmokrejs/tmp/3.9-rc1_disabled_MediaCard_reader_eSATA_coldplugged.tar.bz2

To inspect the incremental diffs of lspci output I used:

prev='/dev/null'; ls -latr lspci_* | awk '{print $9}' | while read cur; do diff -u -w $prev $cur | less; prev=$cur; done

Thank you,
Martin
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Yijing Wang - March 12, 2013, 2:51 a.m.
On 2013/3/12 9:00, Martin Mokrejs wrote:
> Hi,
>   I cold-booted a computer with the card inserted before power-on and collected
> lspci output and express card slot status every second. Then I tried eject and
> hotplug inserts and it appearts the card is not detected, actually maybe pciehp
> is not even suppoosed to work in this case as the slot was occupied during boot.
> But let me come to it later.
> 
> I noted the following on the very first eject of the so far cold-plugged card
> that lspci properly reports PresDet change on the Changed: line. The only time
> I ever saw it. ;-)

Hi Martin,
   PresDet change bit will be cleaned as soon as pciehp driver received the inturrupt from hardware,
So it's difficult to capture the change.

> 
> 
> I re-plugged the card and ejected several times while the while loops
> collecting lspci and slot_status via the setpci shell command harvested
> data. Still, in dmesg there was nothing logged regarding card insert/eject.
> Eventually, I tried rmmod sata_sil24 (did NOT need 'rmmod -f') and that
> did log something new.

No new dmesg info when insert/eject maybe indicate the pciehp driver never received the
interrupt or there is no bit set about Presence Detect Changed here. Or there is debug info
like :
pcie_isr: intr_loc %x at least.

eSATA card SiI 3132, no XHCI, hotplug only got problem with 3.9-rc1? or both at 3.7 3.8?
Martin Mokrejs - March 12, 2013, 9:57 a.m.
Yijing Wang wrote:
> On 2013/3/12 9:00, Martin Mokrejs wrote:
>> Hi,
>>   I cold-booted a computer with the card inserted before power-on and collected
>> lspci output and express card slot status every second. Then I tried eject and
>> hotplug inserts and it appearts the card is not detected, actually maybe pciehp
>> is not even suppoosed to work in this case as the slot was occupied during boot.
>> But let me come to it later.
>>
>> I noted the following on the very first eject of the so far cold-plugged card
>> that lspci properly reports PresDet change on the Changed: line. The only time
>> I ever saw it. ;-)
> 
> Hi Martin,
>    PresDet change bit will be cleaned as soon as pciehp driver received the
> inturrupt from hardware, so it's difficult to capture the change.

Why? What is the purpose of having PresDet+ on the Status: line and PresDet- on
the Changed: line? Why isn't LinkState+ cleared on the Changed: line as well
at least? Sometimes I was even thinking that maybe some broken code in hotplug
changes LinkState instead of the PresDet on the Changed: line.

> 
>>
>>
>> I re-plugged the card and ejected several times while the while loops
>> collecting lspci and slot_status via the setpci shell command harvested
>> data. Still, in dmesg there was nothing logged regarding card insert/eject.
>> Eventually, I tried rmmod sata_sil24 (did NOT need 'rmmod -f') and that
>> did log something new.
> 
> No new dmesg info when insert/eject maybe indicate the pciehp driver never received the
> interrupt or there is no bit set about Presence Detect Changed here.

But it seems it is received - per the Status: line. What the driver does with
the PresDet value on the Changed: line should not matter in this regard, right?

> Or there is debug info like :
> pcie_isr: intr_loc %x at least.

Sorry, this does not help me. Would you please modify the setpci shell command
to print more values in the while loop? Or even better, provide me with a debug
patch showing whenever a value in those registers and additionally derived variables
is changed (0000, 0040, 0100, 0108, 0140, 0148)?



In the "Dell Vostro 3550: pci_hotplug+acpiphp require 'pcie_aspm=force' on kernel command-line for hotplug to work"
thread I already reported how pciehp hotplug under same 3.9-rc1 like here works for the eSATA card:

pciehp hotplug:
    [  211.879397] sata_sil24 0000:11:00.0: enabling device (0100 -> 0103)
coldplug+(unnoticed ejects+inserts)+rmmod sata_sil24:
    [  605.818923] sata_sil24 0000:11:00.0: enabling device (0000 -> 0003)

The cold-plugged eSATA card gave somewhat different output during coldboot
compared to those lines when hotplug happens, so I am not able to compare the
output directly. In the mentioned tar.bz2 archive you could have found yourself
in dmesg_after_rmmod_and_modprobe_sata_sil24.txt file:

[    9.662550] sata_sil24 0000:11:00.0: version 1.1
[    9.665780] scsi6 : sata_sil24
[    9.667526] scsi7 : sata_sil24
[    9.668028] ata7: SATA max UDMA/100 host m128@0xf6c84000 port 0xf6c80000 irq 19
[    9.668032] ata8: SATA max UDMA/100 host m128@0xf6c84000 port 0xf6c82000 irq 19

Not much verbose on coldboot, isn't it?


> 
> eSATA card SiI 3132, no XHCI, hotplug only got problem with 3.9-rc1? or both at 3.7 3.8?

In earlier times I never fiddled xhci disabled under 3.7 nor 3.8. Second, I had to use
acpiphp instead due to the breakage around 3.5. But you might compare with locks
held by sata_sil24 in dmesg files in 
"3.7.10: acpiphp with pcie_aspm=off and eSATA card Sil 3132" thread. That could give
you a clue. Maybe. ;-)

Martin
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Yijing Wang - March 13, 2013, 2:42 a.m.
Hi Martin,
   From your diff info, maybe we can analyze this problem step by step.
1、According to your diff info about first eject and first hot add, the pci device 11:00.0 Mass storage
   controller was removed and was added ok at pci device level;
2、The main problem is 11:00.0 Mass storage controller can not bind its driver normally, right?
3、According to diff info about first hotadd and coldplug, the mainly diff is
> +       Region 0: Memory at f6c84000 (64-bit, non-prefetchable) [disabled] [size=128]
> +       Region 2: Memory at f6c80000 (64-bit, non-prefetchable) [disabled] [size=16K]
> +       Region 4: I/O ports at c000 [disabled] [size=128]

and
MaxReadReq 4096 bytes ----> MaxReadReq 512 bytes

So maybe we can try to find why the memory range was disabled after hot add.

Martin, can you provide  /proc/iomem info when the system bootup, after first eject and
first hot-add?

I suspect the driver release its MMIO successfully after first eject.

Thanks!
Yijing.


On 2013/3/12 9:00, Martin Mokrejs wrote:
> Hi,
>   I cold-booted a computer with the card inserted before power-on and collected
> lspci output and express card slot status every second. Then I tried eject and
> hotplug inserts and it appearts the card is not detected, actually maybe pciehp
> is not even suppoosed to work in this case as the slot was occupied during boot.
> But let me come to it later.
> 
> I noted the following on the very first eject of the so far cold-plugged card
> that lspci properly reports PresDet change on the Changed: line. The only time
> I ever saw it. ;-)
> However, for any following inserts and ejects the value is not updated but slot
> status bits are updated. I had BIOS defaults loaded and additionally, disabled
> MediaCardReader.
> 
> The slot status bits read by setpci were changing in this path:
> card in slot and cold boot 0040 -> eject 0100 hotplug insert -> 0140 eject -> 0100 hotplug insert -> 0140 eject -> 0100
> 
> 
> 
> --- lspci_loop.23:58:50 2013-03-11 23:58:50.000000000 +0100
> +++ lspci_loop.23:58:51 2013-03-11 23:58:51.000000000 +0100
> @@ -439,7 +439,7 @@
>         I/O behind bridge: 0000c000-0000dfff
>         Memory behind bridge: f6c00000-f7cfffff
>         Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
> -       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> +       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>         BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>         Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
> @@ -453,13 +453,13 @@
>                         ClockPM- Surprise- LLActRep+ BwNot-
>                 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> -               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
> +               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
>                 SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
>                         Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
>                 SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>                         Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
> -               SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
> -                       Changed: MRL- PresDet- LinkState-
> +               SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
> +                       Changed: MRL- PresDet+ LinkState+
>                 RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>                 RootCap: CRSVisible-
>                 RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> @@ -478,11 +478,11 @@
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>         Kernel driver in use: pcieport
>  00: 86 80 1e 1c 07 00 10 00 b5 00 04 06 10 00 81 00
> -10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 00
> +10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 20
>  20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
>  30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
>  40: 10 80 42 01 00 80 00 00 00 00 10 00 12 3c 12 08
> -50: 40 00 11 70 60 b2 3c 00 00 00 40 00 00 00 00 00
> +50: 40 00 11 50 60 b2 3c 00 00 00 08 01 00 00 00 00
>  60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
>  70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
>  80: 05 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> @@ -490,7 +490,7 @@
>  a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
>  b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>  c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> -d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 00
> +d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 40
>  e0: 00 03 00 00 00 00 00 00 01 00 00 00 00 00 00 00
>  f0: 00 00 00 00 00 00 00 00 87 0f 05 08 00 00 00 00
>  
> @@ -797,55 +797,23 @@
>  e0: 00 00 40 63 00 00 00 00 00 00 00 00 00 00 00 00
>  f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>  
> -11:00.0 Mass storage controller: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller (rev 01)
> -       Subsystem: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller
> -       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> -       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> -       Latency: 0, Cache Line Size: 64 bytes
> -       Interrupt: pin A routed to IRQ 19
> -       Region 0: Memory at f6c84000 (64-bit, non-prefetchable) [size=128]
> -       Region 2: Memory at f6c80000 (64-bit, non-prefetchable) [size=16K]
> -       Region 4: I/O ports at c000 [size=128]
> -       Expansion ROM at f6c00000 [disabled] [size=512K]
> -       Capabilities: [54] Power Management version 2
> -               Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> -               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
> -       Capabilities: [5c] MSI: Enable- Count=1/1 Maskable- 64bit+
> -               Address: 0000000000000000  Data: 0000
> -       Capabilities: [70] Express (v1) Legacy Endpoint, MSI 00
> -               DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
> -                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
> -               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> -                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> -                       MaxPayload 128 bytes, MaxReadReq 4096 bytes
> -               DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
> -               LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited
> -                       ClockPM- Surprise- LLActRep- BwNot-
> -               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
> -                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> -               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> -       Capabilities: [100 v1] Advanced Error Reporting
> -               UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
> -               UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> -               UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> -               CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> -               CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> -               AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
> +11:00.0 Mass storage controller: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller (rev ff) (prog-if ff)
> +       !!! Unknown header type 7f
>         Kernel driver in use: sata_sil24
> -00: 95 10 32 31 07 00 10 00 01 00 80 01 10 00 00 00
> -10: 04 40 c8 f6 00 00 00 00 04 00 c8 f6 00 00 00 00
> -20: 01 c0 00 00 00 00 00 00 00 00 00 00 95 10 32 31
> -30: 00 00 c0 f6 54 00 00 00 00 00 00 00 0a 01 00 00
> -40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> -50: 00 00 00 00 01 5c 22 06 00 20 00 0c 05 70 80 00
> -60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> -70: 10 00 11 00 03 00 00 00 00 50 0a 00 11 f4 03 00
> -80: 40 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00
> -90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> -a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> -b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> -c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> -d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> -e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> -f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> +00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> +10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> +20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> +30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> +40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> +50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> +60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> +70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> +80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> +90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> +a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> +b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> +c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> +d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> +e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> +f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> --- lspci_loop.23:58:51 2013-03-11 23:58:51.000000000 +0100
> +++ lspci_loop.23:58:52 2013-03-11 23:58:52.000000000 +0100
> @@ -459,7 +459,7 @@
>                 SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>                         Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
>                 SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
> -                       Changed: MRL- PresDet+ LinkState+
> +                       Changed: MRL- PresDet- LinkState+
>                 RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>                 RootCap: CRSVisible-
>                 RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> @@ -482,7 +482,7 @@
>  20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
>  30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
>  40: 10 80 42 01 00 80 00 00 00 00 10 00 12 3c 12 08
> -50: 40 00 11 50 60 b2 3c 00 00 00 08 01 00 00 00 00
> +50: 40 00 11 50 60 b2 3c 00 00 00 00 01 00 00 00 00
>  60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
>  70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
>  80: 05 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> @@ -490,7 +490,7 @@
>  a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
>  b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>  c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> -d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 40
> +d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 00
>  e0: 00 03 00 00 00 00 00 00 01 00 00 00 00 00 00 00
>  f0: 00 00 00 00 00 00 00 00 87 0f 05 08 00 00 00 00
> --- lspci_loop.23:58:58 2013-03-11 23:58:58.000000000 +0100
> +++ lspci_loop.23:58:59 2013-03-11 23:58:59.000000000 +0100
> @@ -101,7 +101,7 @@
>         Capabilities: [98] PCI Advanced Features
>                 AFCap: TP+ FLR+
>                 AFCtrl: FLR-
> -               AFStatus: TP-
> +               AFStatus: TP+
>         Kernel driver in use: ehci-pci
>  00: 86 80 2d 1c 06 00 90 02 05 20 03 0c 00 00 00 00
>  10: 00 80 f0 f7 00 00 00 00 00 00 00 00 00 00 00 00
> --- lspci_loop.23:58:59 2013-03-11 23:58:59.000000000 +0100
> +++ lspci_loop.23:59:00 2013-03-11 23:59:00.000000000 +0100
> @@ -101,7 +101,7 @@
>         Capabilities: [98] PCI Advanced Features
>                 AFCap: TP+ FLR+
>                 AFCtrl: FLR-
> -               AFStatus: TP+
> +               AFStatus: TP-
>         Kernel driver in use: ehci-pci
>  00: 86 80 2d 1c 06 00 90 02 05 20 03 0c 00 00 00 00
>  10: 00 80 f0 f7 00 00 00 00 00 00 00 00 00 00 00 00
> 
> 
> 
> Below is the first hotplug of the card.
> 
> --- lspci_loop.23:59:09 2013-03-11 23:59:09.000000000 +0100
> +++ lspci_loop.23:59:10 2013-03-11 23:59:10.000000000 +0100
> @@ -453,12 +453,12 @@
>                         ClockPM- Surprise- LLActRep+ BwNot-
>                 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> -               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
> +               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
>                 SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
>                         Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
>                 SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>                         Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
> -               SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
> +               SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
>                         Changed: MRL- PresDet- LinkState+
>                 RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>                 RootCap: CRSVisible-
> @@ -482,7 +482,7 @@
>  20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
>  30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
>  40: 10 80 42 01 00 80 00 00 00 00 10 00 12 3c 12 08
> -50: 40 00 11 50 60 b2 3c 00 00 00 00 01 00 00 00 00
> +50: 40 00 11 70 60 b2 3c 00 00 00 40 01 00 00 00 00
>  60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
>  70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
>  80: 05 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> @@ -797,23 +797,54 @@
>  e0: 00 00 40 63 00 00 00 00 00 00 00 00 00 00 00 00
>  f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>  
> -11:00.0 Mass storage controller: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller (rev ff) (prog-if ff)
> -       !!! Unknown header type 7f
> +11:00.0 Mass storage controller: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller (rev 01)
> +       Subsystem: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller
> +       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> +       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> +       Interrupt: pin A routed to IRQ 19
> +       Region 0: Memory at f6c84000 (64-bit, non-prefetchable) [disabled] [size=128]
> +       Region 2: Memory at f6c80000 (64-bit, non-prefetchable) [disabled] [size=16K]
> +       Region 4: I/O ports at c000 [disabled] [size=128]
> +       [virtual] Expansion ROM at f6c00000 [disabled] [size=512K]
> +       Capabilities: [54] Power Management version 2
> +               Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> +               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
> +       Capabilities: [5c] MSI: Enable- Count=1/1 Maskable- 64bit+
> +               Address: 0000000000000000  Data: 0000
> +       Capabilities: [70] Express (v1) Legacy Endpoint, MSI 00
> +               DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
> +                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
> +               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> +                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> +                       MaxPayload 128 bytes, MaxReadReq 512 bytes
> +               DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
> +               LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited
> +                       ClockPM- Surprise- LLActRep- BwNot-
> +               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
> +                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> +               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> +       Capabilities: [100 v1] Advanced Error Reporting
> +               UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
> +               UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> +               UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> +               CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> +               CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> +               AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
>         Kernel driver in use: sata_sil24
> -00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> -10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> -20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> -30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> -40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> -50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> -60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> -70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> -80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> -90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> -a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> -b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> -c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> -d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> -e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> -f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> +00: 95 10 32 31 00 00 10 00 01 00 80 01 00 00 00 00
> +10: 04 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00
> +20: 01 00 00 00 00 00 00 00 00 00 00 00 95 10 32 31
> +30: 00 00 00 00 54 00 00 00 00 00 00 00 00 01 00 00
> +40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> +50: 00 00 00 00 01 5c 22 06 00 20 00 0c 05 70 80 00
> +60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> +70: 10 00 11 00 03 00 00 00 00 20 0a 00 11 f4 03 00
> +80: 40 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00
> +90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> +a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> +b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> +c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> +d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> +e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> +f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> --- lspci_loop.23:59:15 2013-03-11 23:59:15.000000000 +0100
> +++ lspci_loop.23:59:16 2013-03-11 23:59:16.000000000 +0100
> @@ -519,7 +519,7 @@
>  60: 20 20 ff 07 00 00 00 00 01 00 00 01 00 00 08 40
>  70: 00 00 df 3f 00 00 00 00 00 00 00 00 00 00 00 00
>  80: 00 00 80 00 11 88 0c 93 30 0d 00 24 00 00 00 00
> -90: 00 00 00 00 00 00 00 00 13 00 06 03 00 00 00 00
> +90: 00 00 00 00 00 00 00 00 13 00 06 03 00 01 00 00
>  a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>  b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>  c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> --- lspci_loop.23:59:16 2013-03-11 23:59:16.000000000 +0100
> +++ lspci_loop.23:59:17 2013-03-11 23:59:17.000000000 +0100
> @@ -519,7 +519,7 @@
>  60: 20 20 ff 07 00 00 00 00 01 00 00 01 00 00 08 40
>  70: 00 00 df 3f 00 00 00 00 00 00 00 00 00 00 00 00
>  80: 00 00 80 00 11 88 0c 93 30 0d 00 24 00 00 00 00
> -90: 00 00 00 00 00 00 00 00 13 00 06 03 00 01 00 00
> +90: 00 00 00 00 00 00 00 00 13 00 06 03 00 00 00 00
>  a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>  b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>  c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 
> 
> And later unplug of the hotplugged device:
> 
> --- lspci_loop.23:59:18 2013-03-11 23:59:18.000000000 +0100
> +++ lspci_loop.23:59:19 2013-03-11 23:59:19.000000000 +0100
> @@ -453,12 +453,12 @@
>                         ClockPM- Surprise- LLActRep+ BwNot-
>                 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> -               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
> +               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
>                 SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
>                         Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
>                 SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>                         Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
> -               SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
> +               SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
>                         Changed: MRL- PresDet- LinkState+
>                 RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>                 RootCap: CRSVisible-
> @@ -482,7 +482,7 @@
>  20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
>  30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
>  40: 10 80 42 01 00 80 00 00 00 00 10 00 12 3c 12 08
> -50: 40 00 11 70 60 b2 3c 00 00 00 40 01 00 00 00 00
> +50: 40 00 11 50 60 b2 3c 00 00 00 00 01 00 00 00 00
>  60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
>  70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
>  80: 05 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> @@ -797,54 +797,23 @@
>  e0: 00 00 40 63 00 00 00 00 00 00 00 00 00 00 00 00
>  f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>  
> -11:00.0 Mass storage controller: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller (rev 01)
> -       Subsystem: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller
> -       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> -       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> -       Interrupt: pin A routed to IRQ 19
> -       Region 0: Memory at f6c84000 (64-bit, non-prefetchable) [disabled] [size=128]
> -       Region 2: Memory at f6c80000 (64-bit, non-prefetchable) [disabled] [size=16K]
> -       Region 4: I/O ports at c000 [disabled] [size=128]
> -       [virtual] Expansion ROM at f6c00000 [disabled] [size=512K]
> -       Capabilities: [54] Power Management version 2
> -               Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> -               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
> -       Capabilities: [5c] MSI: Enable- Count=1/1 Maskable- 64bit+
> -               Address: 0000000000000000  Data: 0000
> -       Capabilities: [70] Express (v1) Legacy Endpoint, MSI 00
> -               DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
> -                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
> -               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> -                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> -                       MaxPayload 128 bytes, MaxReadReq 512 bytes
> -               DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
> -               LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited
> -                       ClockPM- Surprise- LLActRep- BwNot-
> -               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
> -                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> -               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> -       Capabilities: [100 v1] Advanced Error Reporting
> -               UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
> -               UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> -               UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> -               CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> -               CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> -               AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
> +11:00.0 Mass storage controller: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller (rev ff) (prog-if ff)
> +       !!! Unknown header type 7f
>         Kernel driver in use: sata_sil24
> -00: 95 10 32 31 00 00 10 00 01 00 80 01 00 00 00 00
> -10: 04 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00
> -20: 01 00 00 00 00 00 00 00 00 00 00 00 95 10 32 31
> -30: 00 00 00 00 54 00 00 00 00 00 00 00 00 01 00 00
> -40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> -50: 00 00 00 00 01 5c 22 06 00 20 00 0c 05 70 80 00
> -60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> -70: 10 00 11 00 03 00 00 00 00 20 0a 00 11 f4 03 00
> -80: 40 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00
> -90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> -a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> -b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> -c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> -d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> -e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> -f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> +00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> +10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> +20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> +30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> +40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> +50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> +60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> +70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> +80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> +90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> +a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> +b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> +c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> +d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> +e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> +f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 
> 
> 
> 
> 
> Already from other tests I realized a hotplugged eSATA has some "[virtual]
> Expansion ROM". Here is a reasonably complete diff between a coldplugged
> state of the same card and after a hotplug. In dmesg pciehp complained
> upon its loading that Cache Line Size 64 is not supported so maybe the below
> difference is a direct result of that? Similarly, MaxReadReq is different
> and I bet the lines
> 
> +       Region 0: Memory at f6c84000 (64-bit, non-prefetchable) [disabled] [size=128]
> +       Region 2: Memory at f6c80000 (64-bit, non-prefetchable) [disabled] [size=16K]
> +       Region 4: I/O ports at c000 [disabled] [size=128]
> 
> actually mean the card is left disabled. Then, I am not surprised nothing
> is shown upon its hotplug insert/eject in dmesg. ;-) In this particular setup
> I don't think we are facing a PresDet issue. Either, the value is overwritten
> by some other process, or the bug is somewhere else.
> 
> 
> --- lspci_loop.23:58:26 2013-03-11 23:58:26.000000000 +0100
> +++ lspci_loop.23:59:10 2013-03-11 23:59:10.000000000 +0100
> @@ -439,7 +439,7 @@
>         I/O behind bridge: 0000c000-0000dfff
>         Memory behind bridge: f6c00000-f7cfffff
>         Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
> -       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> +       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>         BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>         Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
> @@ -459,7 +459,7 @@
>                 SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>                         Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
>                 SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
> -                       Changed: MRL- PresDet- LinkState-
> +                       Changed: MRL- PresDet- LinkState+
>                 RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>                 RootCap: CRSVisible-
>                 RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> @@ -478,11 +478,11 @@
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>         Kernel driver in use: pcieport
>  00: 86 80 1e 1c 07 00 10 00 b5 00 04 06 10 00 81 00
> -10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 00
> +10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 20
>  20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
>  30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
>  40: 10 80 42 01 00 80 00 00 00 00 10 00 12 3c 12 08
> -50: 40 00 11 70 60 b2 3c 00 00 00 40 00 00 00 00 00
> +50: 40 00 11 70 60 b2 3c 00 00 00 40 01 00 00 00 00
>  60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
>  70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
>  80: 05 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> @@ -799,14 +799,13 @@
>  
>  11:00.0 Mass storage controller: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller (rev 01)
>         Subsystem: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller
> -       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> +       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> -       Latency: 0, Cache Line Size: 64 bytes
>         Interrupt: pin A routed to IRQ 19
> -       Region 0: Memory at f6c84000 (64-bit, non-prefetchable) [size=128]
> -       Region 2: Memory at f6c80000 (64-bit, non-prefetchable) [size=16K]
> -       Region 4: I/O ports at c000 [size=128]
> -       Expansion ROM at f6c00000 [disabled] [size=512K]
> +       Region 0: Memory at f6c84000 (64-bit, non-prefetchable) [disabled] [size=128]
> +       Region 2: Memory at f6c80000 (64-bit, non-prefetchable) [disabled] [size=16K]
> +       Region 4: I/O ports at c000 [disabled] [size=128]
> +       [virtual] Expansion ROM at f6c00000 [disabled] [size=512K]
>         Capabilities: [54] Power Management version 2
>                 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
> @@ -817,7 +816,7 @@
>                         ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
>                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>                         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> -                       MaxPayload 128 bytes, MaxReadReq 4096 bytes
> +                       MaxPayload 128 bytes, MaxReadReq 512 bytes
>                 DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
>                 LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited
>                         ClockPM- Surprise- LLActRep- BwNot-
> @@ -832,14 +831,14 @@
>                 CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>                 AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
>         Kernel driver in use: sata_sil24
> -00: 95 10 32 31 07 00 10 00 01 00 80 01 10 00 00 00
> -10: 04 40 c8 f6 00 00 00 00 04 00 c8 f6 00 00 00 00
> -20: 01 c0 00 00 00 00 00 00 00 00 00 00 95 10 32 31
> -30: 00 00 c0 f6 54 00 00 00 00 00 00 00 0a 01 00 00
> +00: 95 10 32 31 00 00 10 00 01 00 80 01 00 00 00 00
> +10: 04 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00
> +20: 01 00 00 00 00 00 00 00 00 00 00 00 95 10 32 31
> +30: 00 00 00 00 54 00 00 00 00 00 00 00 00 01 00 00
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>  50: 00 00 00 00 01 5c 22 06 00 20 00 0c 05 70 80 00
>  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> -70: 10 00 11 00 03 00 00 00 00 50 0a 00 11 f4 03 00
> +70: 10 00 11 00 03 00 00 00 00 20 0a 00 11 f4 03 00
>  80: 40 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00
>  90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>  a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 
> 
> 
> Sadly, although the very first eject was notified the sata_sila24 neither
> did "release" the device nor did it complain that it suddenly disappeared.
> That was so far always in dmesg output (like for example):
> 
> [  251.632928] sata_sil24 0000:11:00.0: PME# disabled
> [  251.636498] sata_sil24: IRQ status == 0xffffffff, PCI fault or device removal?
> 
> 
> I re-plugged the card and ejected several times while the while loops
> collecting lspci and slot_status via the setpci shell command harvested
> data. Still, in dmesg there was nothing logged regarding card insert/eject.
> Eventually, I tried rmmod sata_sil24 (did NOT need 'rmmod -f') and that
> did log something new.
> 
> [  529.571040] ata8.00: disabled
> [  529.576365] sd 7:0:0:0: [sdb] Synchronizing SCSI cache
> [  529.577202] sd 7:0:0:0: [sdb]  
> [  529.577204] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
> [  529.577205] sd 7:0:0:0: [sdb] Stopping disk
> [  529.577251] sd 7:0:0:0: [sdb] START_STOP FAILED
> [  529.577253] sd 7:0:0:0: [sdb]  
> [  529.577254] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
> [  529.578309] sata_sil24: IRQ status == 0xffffffff, PCI fault or device removal?
> [  605.818905] sata_sil24 0000:11:00.0: version 1.1
> [  605.818923] sata_sil24 0000:11:00.0: enabling device (0000 -> 0003)
> [  605.914722] sata_sil24 0000:11:00.0: failed to clear port RST
> [  606.014860] sata_sil24 0000:11:00.0: failed to clear port RST
> [  606.014882] sata_sil24 0000:11:00.0: enabling bus mastering
> [  606.017741] scsi8 : sata_sil24
> [  606.019388] scsi9 : sata_sil24
> [  606.019898] ata9: SATA max UDMA/100 host m128@0xf6c84000 port 0xf6c80000 irq 19
> [  606.019902] ata10: SATA max UDMA/100 host m128@0xf6c84000 port 0xf6c82000 irq 19
> [  606.115003] ata9: controller in dubious state, performing PORT_RST
> [  608.327747] ata9: SATA link down (SStatus FFFFFFFF SControl FFFFFFFF)
> [  608.427847] ata10: controller in dubious state, performing PORT_RST
> [  610.640619] ata10: SATA link down (SStatus FFFFFFFF SControl FFFFFFFF)
> 
> 
> 
> 
> Finally, I am tempted to say that pciehp does not work at all under 3.9-rc1
> if the slot was occupied during boot. It does NOT contain the usual debug
> info spanning several lines and it only said:
> 
> [    2.109629] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [    2.110225] pciehp: pcie_port_service_register = 0
> [    2.110226] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> 
> If that is intentional the driver should complain loudly. Please educate me
> what those "[virtual] Expansion ROM's" were in lspci above and whether those
> "[disabled]" memory ranges relate to that as well. If the card is not thought
> to be present or just not recognized ... why is that printed in lspci at all?
> Similarly, what can you tell me if lspci output shows only:
> 
> Latency: 0
> 
> or even lacks the whole "Latency" line altoghether, is that also a disabled device?
> 
> I believe in working cases there is "Latency: 0, Cache Line Size: 64 bytes" instead.
> 
> 
> 
> Details and raw files at: http://195.113.57.32/~mmokrejs/tmp/3.9-rc1_disabled_MediaCard_reader_eSATA_coldplugged.tar.bz2
> 
> To inspect the incremental diffs of lspci output I used:
> 
> prev='/dev/null'; ls -latr lspci_* | awk '{print $9}' | while read cur; do diff -u -w $prev $cur | less; prev=$cur; done
> 
> Thank you,
> Martin
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> .
>

Patch

--- lspci_loop.23:58:50 2013-03-11 23:58:50.000000000 +0100
+++ lspci_loop.23:58:51 2013-03-11 23:58:51.000000000 +0100
@@ -439,7 +439,7 @@ 
        I/O behind bridge: 0000c000-0000dfff
        Memory behind bridge: f6c00000-f7cfffff
        Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
-       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
+       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
@@ -453,13 +453,13 @@ 
                        ClockPM- Surprise- LLActRep+ BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
-               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
+               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
                        Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
-               SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
-                       Changed: MRL- PresDet- LinkState-
+               SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
+                       Changed: MRL- PresDet+ LinkState+
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
@@ -478,11 +478,11 @@ 
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: pcieport
 00: 86 80 1e 1c 07 00 10 00 b5 00 04 06 10 00 81 00
-10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 00
+10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 20
 20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
 40: 10 80 42 01 00 80 00 00 00 00 10 00 12 3c 12 08
-50: 40 00 11 70 60 b2 3c 00 00 00 40 00 00 00 00 00
+50: 40 00 11 50 60 b2 3c 00 00 00 08 01 00 00 00 00
 60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
 70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
 80: 05 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00
@@ -490,7 +490,7 @@ 
 a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 00
+d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 40
 e0: 00 03 00 00 00 00 00 00 01 00 00 00 00 00 00 00
 f0: 00 00 00 00 00 00 00 00 87 0f 05 08 00 00 00 00
 
@@ -797,55 +797,23 @@ 
 e0: 00 00 40 63 00 00 00 00 00 00 00 00 00 00 00 00
 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 
-11:00.0 Mass storage controller: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller (rev 01)
-       Subsystem: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller
-       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
-       Latency: 0, Cache Line Size: 64 bytes
-       Interrupt: pin A routed to IRQ 19
-       Region 0: Memory at f6c84000 (64-bit, non-prefetchable) [size=128]
-       Region 2: Memory at f6c80000 (64-bit, non-prefetchable) [size=16K]
-       Region 4: I/O ports at c000 [size=128]
-       Expansion ROM at f6c00000 [disabled] [size=512K]
-       Capabilities: [54] Power Management version 2
-               Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
-               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
-       Capabilities: [5c] MSI: Enable- Count=1/1 Maskable- 64bit+
-               Address: 0000000000000000  Data: 0000
-       Capabilities: [70] Express (v1) Legacy Endpoint, MSI 00
-               DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
-                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
-               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
-                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
-                       MaxPayload 128 bytes, MaxReadReq 4096 bytes
-               DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
-               LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited
-                       ClockPM- Surprise- LLActRep- BwNot-
-               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
-                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
-               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
-       Capabilities: [100 v1] Advanced Error Reporting
-               UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
-               UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
-               UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
-               CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
-               CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
-               AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
+11:00.0 Mass storage controller: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller (rev ff) (prog-if ff)
+       !!! Unknown header type 7f
        Kernel driver in use: sata_sil24
-00: 95 10 32 31 07 00 10 00 01 00 80 01 10 00 00 00
-10: 04 40 c8 f6 00 00 00 00 04 00 c8 f6 00 00 00 00
-20: 01 c0 00 00 00 00 00 00 00 00 00 00 95 10 32 31
-30: 00 00 c0 f6 54 00 00 00 00 00 00 00 0a 01 00 00
-40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-50: 00 00 00 00 01 5c 22 06 00 20 00 0c 05 70 80 00
-60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-70: 10 00 11 00 03 00 00 00 00 50 0a 00 11 f4 03 00
-80: 40 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00
-90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
--- lspci_loop.23:58:51 2013-03-11 23:58:51.000000000 +0100
+++ lspci_loop.23:58:52 2013-03-11 23:58:52.000000000 +0100
@@ -459,7 +459,7 @@ 
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
-                       Changed: MRL- PresDet+ LinkState+
+                       Changed: MRL- PresDet- LinkState+
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
@@ -482,7 +482,7 @@ 
 20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
 40: 10 80 42 01 00 80 00 00 00 00 10 00 12 3c 12 08
-50: 40 00 11 50 60 b2 3c 00 00 00 08 01 00 00 00 00
+50: 40 00 11 50 60 b2 3c 00 00 00 00 01 00 00 00 00
 60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
 70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
 80: 05 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00
@@ -490,7 +490,7 @@ 
 a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 40
+d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 00
 e0: 00 03 00 00 00 00 00 00 01 00 00 00 00 00 00 00
 f0: 00 00 00 00 00 00 00 00 87 0f 05 08 00 00 00 00
--- lspci_loop.23:58:58 2013-03-11 23:58:58.000000000 +0100
+++ lspci_loop.23:58:59 2013-03-11 23:58:59.000000000 +0100
@@ -101,7 +101,7 @@ 
        Capabilities: [98] PCI Advanced Features
                AFCap: TP+ FLR+
                AFCtrl: FLR-
-               AFStatus: TP-
+               AFStatus: TP+
        Kernel driver in use: ehci-pci
 00: 86 80 2d 1c 06 00 90 02 05 20 03 0c 00 00 00 00
 10: 00 80 f0 f7 00 00 00 00 00 00 00 00 00 00 00 00
--- lspci_loop.23:58:59 2013-03-11 23:58:59.000000000 +0100
+++ lspci_loop.23:59:00 2013-03-11 23:59:00.000000000 +0100
@@ -101,7 +101,7 @@ 
        Capabilities: [98] PCI Advanced Features
                AFCap: TP+ FLR+
                AFCtrl: FLR-
-               AFStatus: TP+
+               AFStatus: TP-
        Kernel driver in use: ehci-pci
 00: 86 80 2d 1c 06 00 90 02 05 20 03 0c 00 00 00 00
 10: 00 80 f0 f7 00 00 00 00 00 00 00 00 00 00 00 00



Below is the first hotplug of the card.

--- lspci_loop.23:59:09 2013-03-11 23:59:09.000000000 +0100
+++ lspci_loop.23:59:10 2013-03-11 23:59:10.000000000 +0100
@@ -453,12 +453,12 @@ 
                        ClockPM- Surprise- LLActRep+ BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
-               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
+               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
                        Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
-               SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
+               SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
                        Changed: MRL- PresDet- LinkState+
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
                RootCap: CRSVisible-
@@ -482,7 +482,7 @@ 
 20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
 40: 10 80 42 01 00 80 00 00 00 00 10 00 12 3c 12 08
-50: 40 00 11 50 60 b2 3c 00 00 00 00 01 00 00 00 00
+50: 40 00 11 70 60 b2 3c 00 00 00 40 01 00 00 00 00
 60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
 70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
 80: 05 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00
@@ -797,23 +797,54 @@ 
 e0: 00 00 40 63 00 00 00 00 00 00 00 00 00 00 00 00
 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 
-11:00.0 Mass storage controller: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller (rev ff) (prog-if ff)
-       !!! Unknown header type 7f
+11:00.0 Mass storage controller: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller (rev 01)
+       Subsystem: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller
+       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+       Interrupt: pin A routed to IRQ 19
+       Region 0: Memory at f6c84000 (64-bit, non-prefetchable) [disabled] [size=128]
+       Region 2: Memory at f6c80000 (64-bit, non-prefetchable) [disabled] [size=16K]
+       Region 4: I/O ports at c000 [disabled] [size=128]
+       [virtual] Expansion ROM at f6c00000 [disabled] [size=512K]
+       Capabilities: [54] Power Management version 2
+               Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
+               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
+       Capabilities: [5c] MSI: Enable- Count=1/1 Maskable- 64bit+
+               Address: 0000000000000000  Data: 0000
+       Capabilities: [70] Express (v1) Legacy Endpoint, MSI 00
+               DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
+                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
+               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
+                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
+                       MaxPayload 128 bytes, MaxReadReq 512 bytes
+               DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
+               LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited
+                       ClockPM- Surprise- LLActRep- BwNot-
+               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
+                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
+               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
+       Capabilities: [100 v1] Advanced Error Reporting
+               UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
+               UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
+               UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
+               CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
+               CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
+               AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
        Kernel driver in use: sata_sil24
-00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
-10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
-20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
-30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
-40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
-50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
-60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
-70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
-80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
-90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
-a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
-b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
-c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
-d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
-e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
-f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+00: 95 10 32 31 00 00 10 00 01 00 80 01 00 00 00 00
+10: 04 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00
+20: 01 00 00 00 00 00 00 00 00 00 00 00 95 10 32 31
+30: 00 00 00 00 54 00 00 00 00 00 00 00 00 01 00 00
+40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+50: 00 00 00 00 01 5c 22 06 00 20 00 0c 05 70 80 00
+60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+70: 10 00 11 00 03 00 00 00 00 20 0a 00 11 f4 03 00
+80: 40 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00
+90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
--- lspci_loop.23:59:15 2013-03-11 23:59:15.000000000 +0100
+++ lspci_loop.23:59:16 2013-03-11 23:59:16.000000000 +0100
@@ -519,7 +519,7 @@ 
 60: 20 20 ff 07 00 00 00 00 01 00 00 01 00 00 08 40
 70: 00 00 df 3f 00 00 00 00 00 00 00 00 00 00 00 00
 80: 00 00 80 00 11 88 0c 93 30 0d 00 24 00 00 00 00
-90: 00 00 00 00 00 00 00 00 13 00 06 03 00 00 00 00
+90: 00 00 00 00 00 00 00 00 13 00 06 03 00 01 00 00
 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
--- lspci_loop.23:59:16 2013-03-11 23:59:16.000000000 +0100
+++ lspci_loop.23:59:17 2013-03-11 23:59:17.000000000 +0100
@@ -519,7 +519,7 @@ 
 60: 20 20 ff 07 00 00 00 00 01 00 00 01 00 00 08 40
 70: 00 00 df 3f 00 00 00 00 00 00 00 00 00 00 00 00
 80: 00 00 80 00 11 88 0c 93 30 0d 00 24 00 00 00 00
-90: 00 00 00 00 00 00 00 00 13 00 06 03 00 01 00 00
+90: 00 00 00 00 00 00 00 00 13 00 06 03 00 00 00 00
 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00


And later unplug of the hotplugged device:

--- lspci_loop.23:59:18 2013-03-11 23:59:18.000000000 +0100
+++ lspci_loop.23:59:19 2013-03-11 23:59:19.000000000 +0100
@@ -453,12 +453,12 @@ 
                        ClockPM- Surprise- LLActRep+ BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
-               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
+               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
                        Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
-               SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
+               SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
                        Changed: MRL- PresDet- LinkState+
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
                RootCap: CRSVisible-
@@ -482,7 +482,7 @@ 
 20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
 40: 10 80 42 01 00 80 00 00 00 00 10 00 12 3c 12 08
-50: 40 00 11 70 60 b2 3c 00 00 00 40 01 00 00 00 00
+50: 40 00 11 50 60 b2 3c 00 00 00 00 01 00 00 00 00
 60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
 70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
 80: 05 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00
@@ -797,54 +797,23 @@ 
 e0: 00 00 40 63 00 00 00 00 00 00 00 00 00 00 00 00
 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 
-11:00.0 Mass storage controller: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller (rev 01)
-       Subsystem: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller
-       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
-       Interrupt: pin A routed to IRQ 19
-       Region 0: Memory at f6c84000 (64-bit, non-prefetchable) [disabled] [size=128]
-       Region 2: Memory at f6c80000 (64-bit, non-prefetchable) [disabled] [size=16K]
-       Region 4: I/O ports at c000 [disabled] [size=128]
-       [virtual] Expansion ROM at f6c00000 [disabled] [size=512K]
-       Capabilities: [54] Power Management version 2
-               Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
-               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
-       Capabilities: [5c] MSI: Enable- Count=1/1 Maskable- 64bit+
-               Address: 0000000000000000  Data: 0000
-       Capabilities: [70] Express (v1) Legacy Endpoint, MSI 00
-               DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
-                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
-               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
-                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
-                       MaxPayload 128 bytes, MaxReadReq 512 bytes
-               DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
-               LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited
-                       ClockPM- Surprise- LLActRep- BwNot-
-               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
-                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
-               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
-       Capabilities: [100 v1] Advanced Error Reporting
-               UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
-               UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
-               UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
-               CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
-               CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
-               AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
+11:00.0 Mass storage controller: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller (rev ff) (prog-if ff)
+       !!! Unknown header type 7f
        Kernel driver in use: sata_sil24
-00: 95 10 32 31 00 00 10 00 01 00 80 01 00 00 00 00
-10: 04 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00
-20: 01 00 00 00 00 00 00 00 00 00 00 00 95 10 32 31
-30: 00 00 00 00 54 00 00 00 00 00 00 00 00 01 00 00
-40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-50: 00 00 00 00 01 5c 22 06 00 20 00 0c 05 70 80 00
-60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-70: 10 00 11 00 03 00 00 00 00 20 0a 00 11 f4 03 00
-80: 40 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00
-90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff





Already from other tests I realized a hotplugged eSATA has some "[virtual]
Expansion ROM". Here is a reasonably complete diff between a coldplugged
state of the same card and after a hotplug. In dmesg pciehp complained
upon its loading that Cache Line Size 64 is not supported so maybe the below
difference is a direct result of that? Similarly, MaxReadReq is different
and I bet the lines

+       Region 0: Memory at f6c84000 (64-bit, non-prefetchable) [disabled] [size=128]
+       Region 2: Memory at f6c80000 (64-bit, non-prefetchable) [disabled] [size=16K]
+       Region 4: I/O ports at c000 [disabled] [size=128]

actually mean the card is left disabled. Then, I am not surprised nothing
is shown upon its hotplug insert/eject in dmesg. ;-) In this particular setup
I don't think we are facing a PresDet issue. Either, the value is overwritten
by some other process, or the bug is somewhere else.


--- lspci_loop.23:58:26 2013-03-11 23:58:26.000000000 +0100
+++ lspci_loop.23:59:10 2013-03-11 23:59:10.000000000 +0100
@@ -439,7 +439,7 @@ 
        I/O behind bridge: 0000c000-0000dfff
        Memory behind bridge: f6c00000-f7cfffff
        Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
-       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
+       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
@@ -459,7 +459,7 @@ 
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
-                       Changed: MRL- PresDet- LinkState-
+                       Changed: MRL- PresDet- LinkState+
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
@@ -478,11 +478,11 @@ 
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: pcieport
 00: 86 80 1e 1c 07 00 10 00 b5 00 04 06 10 00 81 00
-10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 00
+10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 20
 20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
 40: 10 80 42 01 00 80 00 00 00 00 10 00 12 3c 12 08
-50: 40 00 11 70 60 b2 3c 00 00 00 40 00 00 00 00 00
+50: 40 00 11 70 60 b2 3c 00 00 00 40 01 00 00 00 00
 60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
 70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
 80: 05 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00
@@ -799,14 +799,13 @@ 
 
 11:00.0 Mass storage controller: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller (rev 01)
        Subsystem: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller
-       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
-       Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 19
-       Region 0: Memory at f6c84000 (64-bit, non-prefetchable) [size=128]
-       Region 2: Memory at f6c80000 (64-bit, non-prefetchable) [size=16K]
-       Region 4: I/O ports at c000 [size=128]
-       Expansion ROM at f6c00000 [disabled] [size=512K]
+       Region 0: Memory at f6c84000 (64-bit, non-prefetchable) [disabled] [size=128]
+       Region 2: Memory at f6c80000 (64-bit, non-prefetchable) [disabled] [size=16K]
+       Region 4: I/O ports at c000 [disabled] [size=128]
+       [virtual] Expansion ROM at f6c00000 [disabled] [size=512K]
        Capabilities: [54] Power Management version 2
                Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
@@ -817,7 +816,7 @@ 
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
-                       MaxPayload 128 bytes, MaxReadReq 4096 bytes
+                       MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited
                        ClockPM- Surprise- LLActRep- BwNot-
@@ -832,14 +831,14 @@ 
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
                AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
        Kernel driver in use: sata_sil24
-00: 95 10 32 31 07 00 10 00 01 00 80 01 10 00 00 00
-10: 04 40 c8 f6 00 00 00 00 04 00 c8 f6 00 00 00 00
-20: 01 c0 00 00 00 00 00 00 00 00 00 00 95 10 32 31
-30: 00 00 c0 f6 54 00 00 00 00 00 00 00 0a 01 00 00
+00: 95 10 32 31 00 00 10 00 01 00 80 01 00 00 00 00
+10: 04 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00
+20: 01 00 00 00 00 00 00 00 00 00 00 00 95 10 32 31
+30: 00 00 00 00 54 00 00 00 00 00 00 00 00 01 00 00
 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 50: 00 00 00 00 01 5c 22 06 00 20 00 0c 05 70 80 00
 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-70: 10 00 11 00 03 00 00 00 00 50 0a 00 11 f4 03 00
+70: 10 00 11 00 03 00 00 00 00 20 0a 00 11 f4 03 00
 80: 40 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00
 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00