Patchwork ARM: imx: pll1_sys should be an initial on clk

login
register
mail settings
Submitter Shawn Guo
Date March 11, 2013, 2:51 a.m.
Message ID <1362970310-10617-1-git-send-email-shawn.guo@linaro.org>
Download mbox | patch
Permalink /patch/226481/
State New
Headers show

Comments

Shawn Guo - March 11, 2013, 2:51 a.m.
We always boot from PLL1, so let's have pll1_sys in the clks_init_on
list to have clk prepare/enable use count match the hardware status,
so that drivers managing pll1_sys like cpufreq can get the use count
right from the start.

Reported-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 arch/arm/mach-imx/clk-imx6q.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Patch

diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 7b025ee..2f9ff93 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -172,7 +172,7 @@  static struct clk *clk[clk_max];
 static struct clk_onecell_data clk_data;
 
 static enum mx6q_clks const clks_init_on[] __initconst = {
-	mmdc_ch0_axi, rom,
+	mmdc_ch0_axi, rom, pll1_sys,
 };
 
 static struct clk_div_table clk_enet_ref_table[] = {