Patchwork 3.9-rc1 powerpc ptrace.c: 'brk.len' is used uninitialized

login
register
mail settings
Submitter Michael Neuling
Date March 7, 2013, 10:32 p.m.
Message ID <22285.1362695571@ale.ozlabs.ibm.com>
Download mbox | patch
Permalink /patch/225987/
State Not Applicable
Headers show

Comments

Michael Neuling - March 7, 2013, 10:32 p.m.
Philippe De Muyter <phdm@macqel.be> wrote:

> Hello Mikey,
> 
> On Thu, Mar 07, 2013 at 10:14:30AM +1100, Michael Neuling wrote:
> > Philippe De Muyter <phdm@macqel.be> wrote:
> > 
> > > On Thu, Mar 07, 2013 at 09:09:48AM +1100, Michael Neuling wrote:
> > > > > bisect tells me that since your commit 9422de3e953d0e60eb95f5430a9dd803eec1c6d7 
> > > > > "powerpc: Hardware breakpoints rewrite to handle non DABR breakpoint registers",
> > > > > compiling linux fails with :
> > > > > 
> > > > >   cc1: warnings being treated as errors
> > > > >   arch/powerpc/kernel/ptrace.c: In function 'arch_ptrace':
> > > > >   arch/powerpc/kernel/ptrace.c:1450: warning: 'brk.len' is used uninitialized in this function
> > > > >   arch/powerpc/kernel/ptrace.c:1352: note: 'brk.len' was declared here
> > > > > 
> > > > > could you look at that ?
> > > > 
> > > > Sure. 
> > > 
> > > I use gcc-4.2.2, and my .config follows.
> > 
> > I'm a bit lost.  
> > 
> > I don't have 4.2.2 (which is ancient BTW) and I can't hit this on
> > 4.3,4.5 or 4.6 with your config.  It compiles fine.
> > 
> > Also:
> > 
> > >   arch/powerpc/kernel/ptrace.c:1450: warning: 'brk.len' is used uninitialized in this function
> > >   arch/powerpc/kernel/ptrace.c:1352: note: 'brk.len' was declared here
> > 
> > These line numbers make no sense at all WRT v3.9-rc1.  brk.len is neither
> > declared or used in those lines:
> 
> those were the line numbers just after your commit
> 
> In 3.9-rc1 they are :
> 
> cc1: warnings being treated as errors
> arch/powerpc/kernel/ptrace.c: In function 'arch_ptrace':
> arch/powerpc/kernel/ptrace.c:1479: warning: 'brk.len' is used uninitialized in this function
> arch/powerpc/kernel/ptrace.c:1381: note: 'brk.len' was declared here
> 
> 		if (child->thread.hw_brk.address)
> 			return -ENOSPC;
> 
> 1479:		child->thread.hw_brk = brk;
> 
> 		return 1;
> 	#endif /* !CONFIG_PPC_ADV_DEBUG_DVCS */

Got it.  I still can't replicate the issue here, so can you check if the
below works for you?

Thanks,
Mikey

Patch

diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 245c1b6..3b5f9dc 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -1428,6 +1428,7 @@  static long ppc_set_hwdebug(struct task_struct *child,
 
 	brk.address = bp_info->addr & ~7UL;
 	brk.type = HW_BRK_TYPE_TRANSLATE;
+	brk.len = len;
 	if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
 		brk.type |= HW_BRK_TYPE_READ;
 	if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)