diff mbox

[U-Boot] mx28evk: Introduce a new target for saving env vars to NAND

Message ID 1362691699-19514-1-git-send-email-fabio.estevam@freescale.com
State Awaiting Upstream
Delegated to: Stefano Babic
Headers show

Commit Message

Fabio Estevam March 7, 2013, 9:28 p.m. UTC 
Introduce 'mx28evk_nand' target for saving environment variables into NAND.

The mx28evk board does not come with a NAND flash populated from the 
factory. It comes with an empty slot (U23), which allows the insertion of a 
48-pin TSOP flash device.

Tested with a K9LBG08U0D.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
 boards.cfg                |    3 ++-
 doc/README.mx28evk        |   18 ++++++++++++++++++
 include/configs/mx28evk.h |   31 ++++++++++++++++++++++++++++++-
 3 files changed, 50 insertions(+), 2 deletions(-)

Comments

Otavio Salvador March 8, 2013, 1:44 p.m. UTC | #1 
On Thu, Mar 7, 2013 at 6:28 PM, Fabio Estevam
<fabio.estevam@freescale.com> wrote:
> Introduce 'mx28evk_nand' target for saving environment variables into NAND.
>
> The mx28evk board does not come with a NAND flash populated from the
> factory. It comes with an empty slot (U23), which allows the insertion of a
> 48-pin TSOP flash device.
>
> Tested with a K9LBG08U0D.
>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

Reviewed-by: Otavio Salvador <otavio@ossystems.com.br>

--
Otavio Salvador                             O.S. Systems
E-mail: otavio@ossystems.com.br  http://www.ossystems.com.br
Mobile: +55 53 9981-7854              http://projetos.ossystems.com.br
Stefano Babic April 3, 2013, 8:56 a.m. UTC | #2 
On 07/03/2013 22:28, Fabio Estevam wrote:
> Introduce 'mx28evk_nand' target for saving environment variables into NAND.
> 
> The mx28evk board does not come with a NAND flash populated from the 
> factory. It comes with an empty slot (U23), which allows the insertion of a 
> 48-pin TSOP flash device.
> 
> Tested with a K9LBG08U0D.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---

Applied to u-boot-imx (Fabio, I rebased on current TOT), thanks.

Best regards,
Stefano
diff mbox

Patch

diff --git a/boards.cfg b/boards.cfg
index 7a0b79d..a9a061b 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -195,7 +195,8 @@  mx23_olinuxino               arm         arm926ejs   mx23_olinuxino      olimex
 apx4devkit                   arm         arm926ejs   apx4devkit          bluegiga       mxs		apx4devkit
 mx23evk                      arm         arm926ejs   mx23evk             freescale      mxs		mx23evk
 m28evk                       arm         arm926ejs   m28evk              denx           mxs		m28evk
-mx28evk                      arm         arm926ejs   mx28evk             freescale      mxs		mx28evk
+mx28evk                      arm         arm926ejs   mx28evk             freescale      mxs		mx28evk:ENV_IS_IN_MMC
+mx28evk_nand                 arm         arm926ejs   mx28evk             freescale      mxs		mx28evk:ENV_IS_IN_NAND
 sc_sps_1                     arm         arm926ejs   sc_sps_1            schulercontrol mxs
 nhk8815                      arm         arm926ejs   nhk8815             st             nomadik
 nhk8815_onenand              arm         arm926ejs   nhk8815             st             nomadik       nhk8815:BOOT_ONENAND
diff --git a/doc/README.mx28evk b/doc/README.mx28evk
index 2fc5069..d0c5ae8 100644
--- a/doc/README.mx28evk
+++ b/doc/README.mx28evk
@@ -23,6 +23,24 @@  To boot MX28EVK from an SD card, set the boot mode DIP switches as:
    * VDD 5V: To the left (off)
    * Hold Button: Down (off)
 
+
+Environment Storage
+-------------------
+
+There are two targets for mx28evk:
+
+"make mx28evk_config"		- store enviroment variables into MMC
+
+or
+
+"make mx28evk_nand_config"	- store enviroment variables into NAND flash
+
+Choose the target accordingly.
+
+Note: The mx28evk board does not come with a NAND flash populated from the
+factory. It comes with an empty slot (U23), which allows the insertion of a
+48-pin TSOP flash device.
+
 Follow the instructions from doc/README.mx28_common to generate a bootable SD
 card.
 
diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h
index 0d918a1..9cc236f 100644
--- a/include/configs/mx28evk.h
+++ b/include/configs/mx28evk.h
@@ -69,6 +69,7 @@ 
 #define CONFIG_CMD_USB
 #define CONFIG_CMD_BOOTZ
 #define CONFIG_CMD_I2C
+#define CONFIG_CMD_NAND
 
 /*
  * Memory configurations
@@ -132,7 +133,6 @@ 
 /*
  * MMC Driver
  */
-#define CONFIG_ENV_IS_IN_MMC
 #ifdef CONFIG_ENV_IS_IN_MMC
  #define CONFIG_ENV_OFFSET	(256 * 1024)
  #define CONFIG_ENV_SIZE	(16 * 1024)
@@ -149,11 +149,40 @@ 
 /*
  * NAND Driver
  */
+#define CONFIG_ENV_SIZE			(16 * 1024)
 #ifdef CONFIG_CMD_NAND
 #define CONFIG_NAND_MXS
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		0x60000000
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
+
+/* Environment is in NAND */
+#define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
+#define CONFIG_ENV_SECT_SIZE		(128 * 1024)
+#define CONFIG_ENV_RANGE		(512 * 1024)
+#ifndef CONFIG_ENV_OFFSET
+#define CONFIG_ENV_OFFSET		0x300000
+#endif
+#define CONFIG_ENV_OFFSET_REDUND	\
+		(CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
+
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define MTDIDS_DEFAULT			"nand0=gpmi-nand"
+#define MTDPARTS_DEFAULT			\
+	"mtdparts=gpmi-nand:"			\
+		"3m(bootloader)ro,"		\
+		"512k(environment),"		\
+		"512k(redundant-environment),"	\
+		"4m(kernel),"			\
+		"128k(fdt),"			\
+		"8m(ramdisk),"			\
+		"-(filesystem)"
 #endif
 
 /*