Patchwork [U-Boot,3/3,v2] ppc4xx: Add lcd4_lwmon5 support

login
register
mail settings
Submitter Stefan Roese
Date March 7, 2013, 12:01 p.m.
Message ID <1362657695-25027-1-git-send-email-sr@denx.de>
Download mbox | patch
Permalink /patch/225830/
State Superseded
Delegated to: Stefan Roese
Headers show

Comments

Stefan Roese - March 7, 2013, 12:01 p.m.
This patch adds the fast booting LWMON5 derivat "lcd4_lwmon5".
Its a stripped down version of the full blown lwmon5 support,
without ECC, USB, POST and some other stuff. It used the newly
introduced SPL infrastrucure for SPL from NOR flash booting
on the PPC4xx.

By setting the environment variable "boot_os" to "yes", Linux
will be started from the SPL version. If not, the "normal"
U-Boot will be started.

Signed-off-by: Stefan Roese <sr@denx.de>
---
v2:
- Call board_init_f() from spl_board_init(). This initializes
  the PFC registers needed for example for working ethernet in Linux.

 board/lwmon5/lwmon5.c    | 69 ++++++++++++++++++++++++++++++++++++++++++++++--
 board/lwmon5/sdram.c     |  4 ++-
 boards.cfg               |  1 +
 include/configs/lwmon5.h | 68 ++++++++++++++++++++++++++++++++++++++++++++---
 4 files changed, 136 insertions(+), 6 deletions(-)

Patch

diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c
index ecd9536..db49c19 100644
--- a/board/lwmon5/lwmon5.c
+++ b/board/lwmon5/lwmon5.c
@@ -1,5 +1,5 @@ 
 /*
- * (C) Copyright 2007-2010
+ * (C) Copyright 2007-2013
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
  * This program is free software; you can redistribute it and/or
@@ -200,9 +200,11 @@  int misc_init_r(void)
 	u32 pbcr;
 	int size_val = 0;
 	u32 reg;
+#ifndef CONFIG_LCD4_LWMON5
 	unsigned long usb2d0cr = 0;
 	unsigned long usb2phy0cr, usb2h0cr = 0;
 	unsigned long sdr0_pfc1, sdr0_srst;
+#endif
 
 	/*
 	 * FLASH stuff...
@@ -233,6 +235,7 @@  int misc_init_r(void)
 		      CONFIG_ENV_ADDR_REDUND + 2 * CONFIG_ENV_SECT_SIZE - 1,
 		      &flash_info[cfi_flash_num_flash_banks - 1]);
 
+#ifndef CONFIG_LCD4_LWMON5
 	/*
 	 * USB suff...
 	 */
@@ -306,6 +309,7 @@  int misc_init_r(void)
 	/* 7. Reassert internal PHY reset: */
 	mtsdr(SDR0_SRST1, SDR0_SRST1_USB20PHY);
 	udelay(1000);
+#endif
 
 	/*
 	 * Clear resets
@@ -313,7 +317,9 @@  int misc_init_r(void)
 	mtsdr(SDR0_SRST1, 0x00000000);
 	mtsdr(SDR0_SRST0, 0x00000000);
 
+#ifndef CONFIG_LCD4_LWMON5
 	printf("USB:   Host(int phy) Device(ext phy)\n");
+#endif
 
 	/*
 	 * Clear PLB4A0_ACR[WRP]
@@ -323,10 +329,12 @@  int misc_init_r(void)
 	reg = mfdcr(PLB4A0_ACR) & ~PLB4Ax_ACR_WRP_MASK;
 	mtdcr(PLB4A0_ACR, reg);
 
+#ifndef CONFIG_LCD4_LWMON5
 	/*
 	 * Init matrix keyboard
 	 */
 	misc_init_r_kbd();
+#endif
 
 	return 0;
 }
@@ -336,7 +344,7 @@  int checkboard(void)
 	char buf[64];
 	int i = getenv_f("serial#", buf, sizeof(buf));
 
-	puts("Board: lwmon5");
+	printf("Board: %s", __stringify(CONFIG_HOSTNAME));
 
 	if (i > 0) {
 		puts(", serial# ");
@@ -495,3 +503,60 @@  void board_reset(void)
 {
 	gpio_write_bit(CONFIG_SYS_GPIO_BOARD_RESET, 1);
 }
+
+#ifdef CONFIG_SPL_OS_BOOT
+/*
+ * lwmon5 specific implementation of spl_start_uboot()
+ *
+ * RETURN
+ * 0 if booting into OS is selected (default)
+ * 1 if booting into U-Boot is selected
+ */
+int spl_start_uboot(void)
+{
+	char s[8];
+
+	env_init();
+	getenv_f("boot_os", s, sizeof(s));
+	if ((s != NULL) && (strcmp(s, "yes") == 0))
+		return 0;
+
+	return 1;
+}
+
+/*
+ * This function is called from the SPL U-Boot version for
+ * early init stuff, that needs to be done for OS (e.g. Linux)
+ * booting. Doing it later in the real U-Boot would not work
+ * in case that the SPL U-Boot boots Linux directly.
+ */
+void spl_board_init(void)
+{
+	const gdc_regs *regs = board_get_regs();
+
+	/*
+	 * Setup PFC registers, mainly for ethernet support
+	 * later on in Linux
+	 */
+	board_early_init_f();
+
+	/*
+	 * Reset Lime controller
+	 */
+	gpio_write_bit(CONFIG_SYS_GPIO_LIME_S, 1);
+	udelay(500);
+	gpio_write_bit(CONFIG_SYS_GPIO_LIME_RST, 1);
+
+	out_be32((void *)CONFIG_SYS_LIME_SDRAM_CLOCK, CONFIG_SYS_MB862xx_CCF);
+	udelay(300);
+	out_be32((void *)CONFIG_SYS_LIME_MMR, CONFIG_SYS_MB862xx_MMR);
+
+	while (regs->index) {
+		out_be32((void *)(CONFIG_SYS_LIME_BASE_0 + GC_DISP_BASE) +
+			 regs->index, regs->value);
+		regs++;
+	}
+
+	board_backlight_brightness(DEFAULT_BRIGHTNESS);
+}
+#endif
diff --git a/board/lwmon5/sdram.c b/board/lwmon5/sdram.c
index b64b35a..78b8fbc 100644
--- a/board/lwmon5/sdram.c
+++ b/board/lwmon5/sdram.c
@@ -6,7 +6,7 @@ 
  * Alain Saurel,	    AMCC/IBM, alain.saurel@fr.ibm.com
  * Robert Snyder,	    AMCC/IBM, rob.snyder@fr.ibm.com
  *
- * (C) Copyright 2007-2008
+ * (C) Copyright 2007-2013
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
  * This program is free software; you can redistribute it and/or
@@ -160,6 +160,7 @@  static void program_ecc(u32 start_address,
  ************************************************************************/
 phys_size_t initdram (int board_type)
 {
+#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_LCD4_LWMON5)
 	/* CL=4 */
 	mtsdram(DDR0_02, 0x00000000);
 
@@ -253,6 +254,7 @@  phys_size_t initdram (int board_type)
 	 * exceptions are enabled.
 	 */
 	set_mcsr(get_mcsr());
+#endif /* CONFIG_SPL_BUILD */
 
 	return (CONFIG_SYS_MBYTES_SDRAM << 20);
 }
diff --git a/boards.cfg b/boards.cfg
index e4b0d44..2d1f12f 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -972,6 +972,7 @@  JSE                          powerpc     ppc4xx      jse
 korat                        powerpc     ppc4xx
 korat_perm                   powerpc     ppc4xx      korat               -              -           korat:KORAT_PERMANENT
 lwmon5                       powerpc     ppc4xx
+lcd4_lwmon5                  powerpc     ppc4xx      lwmon5              -              -           lwmon5:LCD4_LWMON5
 pcs440ep                     powerpc     ppc4xx
 quad100hd                    powerpc     ppc4xx
 sbc405                       powerpc     ppc4xx
diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index 2ebcd16..ba613e3 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -1,5 +1,5 @@ 
 /*
- * (C) Copyright 2007-2010
+ * (C) Copyright 2007-2013
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
  * This program is free software; you can redistribute it and/or
@@ -37,8 +37,12 @@ 
 #define CONFIG_440		1		/* ... PPC440 family	*/
 #define CONFIG_4xx		1		/* ... PPC4xx family	*/
 
-#ifndef CONFIG_SYS_TEXT_BASE
+#ifdef CONFIG_LCD4_LWMON5
+#define	CONFIG_SYS_TEXT_BASE	0x01000000 /* SPL U-Boot TEXT_BASE */
+#define CONFIG_HOSTNAME		lcd4_lwmon5
+#else
 #define CONFIG_SYS_TEXT_BASE	0xFFF80000
+#define CONFIG_HOSTNAME		lwmon5
 #endif
 
 #define CONFIG_SYS_CLK_FREQ	33300000	/* external freq to pll	*/
@@ -56,7 +60,7 @@ 
  * actual resources get mapped (not physical addresses)
  */
 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE	/* Start of U-Boot	*/
-#define CONFIG_SYS_MONITOR_LEN		(0xFFFFFFFF - CONFIG_SYS_MONITOR_BASE + 1)
+#define CONFIG_SYS_MONITOR_LEN		0x80000
 #define CONFIG_SYS_MALLOC_LEN		(1 << 20)	/* Reserved for malloc	*/
 
 #define CONFIG_SYS_BOOT_BASE_ADDR	0xf0000000
@@ -75,9 +79,11 @@ 
 #define CONFIG_SYS_PCI_MEMBASE2		(CONFIG_SYS_PCI_MEMBASE1 + 0x10000000)
 #define CONFIG_SYS_PCI_MEMBASE3		(CONFIG_SYS_PCI_MEMBASE2 + 0x10000000)
 
+#ifndef CONFIG_LCD4_LWMON5
 #define CONFIG_SYS_USB2D0_BASE		0xe0000100
 #define CONFIG_SYS_USB_DEVICE		0xe0000000
 #define CONFIG_SYS_USB_HOST		0xe0000400
+#endif
 
 /*
  * Initial RAM & stack pointer
@@ -87,12 +93,20 @@ 
  * content during reset (GPT0_COMP6). This way we reserve the OCM (16k)
  * for logbuffer only. (GPT0_COMP1-COMP5 are reserved for logbuffer header.)
  */
+#ifndef CONFIG_LCD4_LWMON5
 #define CONFIG_SYS_INIT_RAM_DCACHE	1		/* d-cache as init ram	*/
 #define CONFIG_SYS_INIT_RAM_ADDR	0x70000000		/* DCache       */
 #define CONFIG_SYS_INIT_RAM_SIZE		(4 << 10)
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
 					 GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+#else
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_BASE
+#define CONFIG_SYS_INIT_RAM_SIZE	(4 << 10)
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
+					 GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
+#endif
 /* unused GPT0 COMP reg	*/
 #define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP6)
 #define CONFIG_SYS_OCM_SIZE		(16 << 10)
@@ -166,8 +180,11 @@ 
 #define CONFIG_SYS_MBYTES_SDRAM		256
 #define CONFIG_SYS_DDR_CACHED_ADDR	0x40000000	/* setup 2nd TLB cached here	*/
 #define CONFIG_DDR_DATA_EYE			/* use DDR2 optimization	*/
+#ifndef CONFIG_LCD4_LWMON5
 #define CONFIG_DDR_ECC				/* enable ECC			*/
+#endif
 
+#ifndef CONFIG_LCD4_LWMON5
 /* POST support */
 #define CONFIG_POST		(CONFIG_SYS_POST_CACHE		| \
 				 CONFIG_SYS_POST_CPU		| \
@@ -276,6 +293,7 @@ 
 #define CONFIG_ALT_LH_ADDR	(CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP1)
 #define CONFIG_ALT_LB_ADDR	(CONFIG_SYS_OCM_BASE)
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
+#endif
 
 /*
  * I2C
@@ -395,6 +413,7 @@ 
 #define CONFIG_VIDEO_SW_CURSOR
 #define CONFIG_SPLASH_SCREEN
 
+#ifndef CONFIG_LCD4_LWMON5
 /*
  * USB/EHCI
  */
@@ -410,6 +429,7 @@ 
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
 #define CONFIG_ISO_PARTITION
+#endif
 
 /*
  * BOOTP options
@@ -444,9 +464,11 @@ 
 #define CONFIG_CMD_BMP
 #endif
 
+#ifndef CONFIG_LCD4_LWMON5
 #ifdef CONFIG_440EPX
 #define CONFIG_CMD_USB
 #endif
+#endif
 
 /*
  * Miscellaneous configurable options
@@ -480,11 +502,15 @@ 
 #define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
 #define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
 
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	/* don't print console @ startup*/
+
+#ifndef CONFIG_LCD4_LWMON5
 #ifndef DEBUG
 #define CONFIG_HW_WATCHDOG	1	/* Use external HW-Watchdog	*/
 #endif
 #define CONFIG_WD_PERIOD	40000	/* in usec */
 #define CONFIG_WD_MAX_RATE	66600	/* in ticks */
+#endif
 
 /*
  * For booting Linux, the board info and command line data
@@ -644,4 +670,40 @@ 
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	    /* which serial port to use */
 #endif
+
+/*
+ * SPL related defines
+ */
+#ifdef CONFIG_LCD4_LWMON5
+#define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SPL_NOR_SUPPORT
+#define CONFIG_SPL_TEXT_BASE		0xffff0000 /* last 64 KiB for SPL */
+#define CONFIG_SYS_SPL_MAX_LEN		(64 << 10)
+#define CONFIG_UBOOT_PAD_TO		458752	/* decimal for 'dd' */
+#define	CONFIG_SPL_START_S_PATH	"arch/powerpc/cpu/ppc4xx"
+#define CONFIG_SPL_LDSCRIPT	"arch/powerpc/cpu/ppc4xx/u-boot-spl.lds"
+#define CONFIG_SPL_LIBCOMMON_SUPPORT	/* image.c */
+#define CONFIG_SPL_LIBGENERIC_SUPPORT	/* string.c */
+#define CONFIG_SPL_SERIAL_SUPPORT
+
+/* Place BSS for SPL near end of SDRAM */
+#define CONFIG_SPL_BSS_START_ADDR	((256 - 1) << 20)
+#define CONFIG_SPL_BSS_MAX_SIZE		(64 << 10)
+
+#define CONFIG_SPL_OS_BOOT
+/* Place patched DT blob (fdt) at this address */
+#define CONFIG_SYS_SPL_ARGS_ADDR	0x01800000
+
+#define CONFIG_SPL_TARGET		"u-boot-img-spl-at-end.bin"
+
+/* Settings for real U-Boot to be loaded from NOR flash */
+#define CONFIG_SYS_UBOOT_BASE		(-CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_SYS_UBOOT_START		0x01002100
+
+#define CONFIG_SYS_OS_BASE		0xf8000000
+#define CONFIG_SYS_FDT_BASE		0xf87c0000
+#endif
+
 #endif	/* __CONFIG_H */