From patchwork Tue Mar 5 17:03:30 2013 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Daniel Hellstrom X-Patchwork-Id: 225092 X-Patchwork-Delegate: davem@davemloft.net Return-Path: X-Original-To: patchwork-incoming@ozlabs.org Delivered-To: patchwork-incoming@ozlabs.org Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 841F12C0314 for ; Wed, 6 Mar 2013 04:06:55 +1100 (EST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756610Ab3CERGq (ORCPT ); Tue, 5 Mar 2013 12:06:46 -0500 Received: from vsp-authed02.binero.net ([195.74.38.226]:61725 "HELO vsp-authed-01-02.binero.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S1752912Ab3CERGd (ORCPT ); Tue, 5 Mar 2013 12:06:33 -0500 Received: from smtp01.binero.se (unknown [195.74.38.28]) by vsp-authed-01-02.binero.net (Halon Mail Gateway) with ESMTP; Tue, 5 Mar 2013 18:05:32 +0100 (CET) Received: from localhost.localdomain (static-92-33-28-242.sme.bredbandsbolaget.se [92.33.28.242]) (Authenticated sender: daniel@gaisler.com) by smtp-10-01.atm.binero.net (Postfix) with ESMTPA id E2AB33A142; Tue, 5 Mar 2013 18:05:31 +0100 (CET) From: Daniel Hellstrom To: davem@davemloft.net Cc: sam@ravnborg.org, sparclinux@vger.kernel.org, software@gaisler.com Subject: [PATCH v4] sparc, leon: support for GRPCI1 PCI host bridge controller Date: Tue, 5 Mar 2013 18:03:30 +0100 Message-Id: <1362503010-30788-1-git-send-email-daniel@gaisler.com> X-Mailer: git-send-email 1.7.0.4 Sender: sparclinux-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: sparclinux@vger.kernel.org Some of the GRPCI1 cores does not support detection of all PCI errors, the default is therefore limited PCI error handling. The property all_pci_errors my be set by the boot loader to enable interrupt on all PCI errors. Signed-off-by: Daniel Hellstrom Acked-by: Sam Ravnborg --- arch/sparc/Kconfig | 11 + arch/sparc/kernel/Makefile | 1 + arch/sparc/kernel/leon_pci_grpci1.c | 724 +++++++++++++++++++++++++++++++++++ 3 files changed, 736 insertions(+), 0 deletions(-) create mode 100644 arch/sparc/kernel/leon_pci_grpci1.c diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 9bff3db..ad5ad8f 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -500,6 +500,17 @@ config LEON_PCI depends on PCI && SPARC_LEON default y +config SPARC_GRPCI1 + bool "GRPCI Host Bridge Support" + depends on LEON_PCI + default y + help + Say Y here to include the GRPCI Host Bridge Driver. The GRPCI + PCI host controller is typically found in GRLIB SPARC32/LEON + systems. The driver has one property (all_pci_errors) controlled + from the bootloader that makes the GRPCI to generate interrupts + on detected PCI Parity and System errors. + config GRPCI2 bool "GRPCI2 Host Bridge Support" depends on LEON_PCI diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile index 6cf591b..c90a2a0 100644 --- a/arch/sparc/kernel/Makefile +++ b/arch/sparc/kernel/Makefile @@ -75,6 +75,7 @@ obj-y += dma.o obj-$(CONFIG_PCIC_PCI) += pcic.o obj-$(CONFIG_LEON_PCI) += leon_pci.o obj-$(CONFIG_GRPCI2) += leon_pci_grpci2.o +obj-$(CONFIG_SPARC_GRPCI1)+= leon_pci_grpci1.o obj-$(CONFIG_SMP) += trampoline_$(BITS).o smp_$(BITS).o obj-$(CONFIG_SPARC32_SMP) += sun4m_smp.o sun4d_smp.o leon_smp.o diff --git a/arch/sparc/kernel/leon_pci_grpci1.c b/arch/sparc/kernel/leon_pci_grpci1.c new file mode 100644 index 0000000..7739a54 --- /dev/null +++ b/arch/sparc/kernel/leon_pci_grpci1.c @@ -0,0 +1,724 @@ +/* + * leon_pci_grpci1.c: GRPCI1 Host PCI driver + * + * Copyright (C) 2013 Aeroflex Gaisler AB + * + * This GRPCI1 driver does not support PCI interrupts taken from + * GPIO pins. Interrupt generation at PCI parity and system error + * detection is by default turned off since some GRPCI1 cores does + * not support detection. It can be turned on from the bootloader + * using the all_pci_errors property. + * + * Contributors: Daniel Hellstrom + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "irq.h" + +/* Enable/Disable Debugging Configuration Space Access */ +#undef GRPCI1_DEBUG_CFGACCESS + +/* + * GRPCI1 APB Register MAP + */ +struct grpci1_regs { + unsigned int cfg_stat; /* 0x00 Configuration / Status */ + unsigned int bar0; /* 0x04 BAR0 (RO) */ + unsigned int page0; /* 0x08 PAGE0 (RO) */ + unsigned int bar1; /* 0x0C BAR1 (RO) */ + unsigned int page1; /* 0x10 PAGE1 */ + unsigned int iomap; /* 0x14 IO Map */ + unsigned int stat_cmd; /* 0x18 PCI Status & Command (RO) */ + unsigned int irq; /* 0x1C Interrupt register */ +}; + +#define REGLOAD(a) (be32_to_cpu(__raw_readl(&(a)))) +#define REGSTORE(a, v) (__raw_writel(cpu_to_be32(v), &(a))) + +#define PAGE0_BTEN_BIT 0 +#define PAGE0_BTEN (1 << PAGE0_BTEN_BIT) + +#define CFGSTAT_HOST_BIT 13 +#define CFGSTAT_CTO_BIT 8 +#define CFGSTAT_HOST (1 << CFGSTAT_HOST_BIT) +#define CFGSTAT_CTO (1 << CFGSTAT_CTO_BIT) + +#define IRQ_DPE (1 << 9) +#define IRQ_SSE (1 << 8) +#define IRQ_RMA (1 << 7) +#define IRQ_RTA (1 << 6) +#define IRQ_STA (1 << 5) +#define IRQ_DPED (1 << 4) +#define IRQ_INTD (1 << 3) +#define IRQ_INTC (1 << 2) +#define IRQ_INTB (1 << 1) +#define IRQ_INTA (1 << 0) +#define IRQ_DEF_ERRORS (IRQ_RMA | IRQ_RTA | IRQ_STA) +#define IRQ_ALL_ERRORS (IRQ_DPED | IRQ_DEF_ERRORS | IRQ_SSE | IRQ_DPE) +#define IRQ_INTX (IRQ_INTA | IRQ_INTB | IRQ_INTC | IRQ_INTD) +#define IRQ_MASK_BIT 16 + +#define DEF_PCI_ERRORS (PCI_STATUS_SIG_TARGET_ABORT | \ + PCI_STATUS_REC_TARGET_ABORT | \ + PCI_STATUS_REC_MASTER_ABORT) +#define ALL_PCI_ERRORS (PCI_STATUS_PARITY | PCI_STATUS_DETECTED_PARITY | \ + PCI_STATUS_SIG_SYSTEM_ERROR | DEF_PCI_ERRORS) + +#define TGT 256 + +struct grpci1_priv { + struct leon_pci_info info; /* must be on top of this structure */ + struct grpci1_regs *regs; /* GRPCI register map */ + struct device *dev; + int pci_err_mask; /* STATUS register error mask */ + int irq; /* LEON irqctrl GRPCI IRQ */ + unsigned char irq_map[4]; /* GRPCI nexus PCI INTX# IRQs */ + unsigned int irq_err; /* GRPCI nexus Virt Error IRQ */ + + /* AHB PCI Windows */ + unsigned long pci_area; /* MEMORY */ + unsigned long pci_area_end; + unsigned long pci_io; /* I/O */ + unsigned long pci_conf; /* CONFIGURATION */ + unsigned long pci_conf_end; + unsigned long pci_io_va; +}; + +static struct grpci1_priv *grpci1priv; + +static int grpci1_cfg_w32(struct grpci1_priv *priv, unsigned int bus, + unsigned int devfn, int where, u32 val); + +int grpci1_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + struct grpci1_priv *priv = dev->bus->sysdata; + int irq_group; + + /* Use default IRQ decoding on PCI BUS0 according slot numbering */ + irq_group = slot & 0x3; + pin = ((pin - 1) + irq_group) & 0x3; + + return priv->irq_map[pin]; +} + +static int grpci1_cfg_r32(struct grpci1_priv *priv, unsigned int bus, + unsigned int devfn, int where, u32 *val) +{ + u32 *pci_conf, tmp, cfg; + + if (where & 0x3) + return -EINVAL; + + if (bus == 0) { + devfn += (0x8 * 6); /* start at AD16=Device0 */ + } else if (bus == TGT) { + bus = 0; + devfn = 0; /* special case: bridge controller itself */ + } + + /* Select bus */ + cfg = REGLOAD(priv->regs->cfg_stat); + REGSTORE(priv->regs->cfg_stat, (cfg & ~(0xf << 23)) | (bus << 23)); + + /* do read access */ + pci_conf = (u32 *) (priv->pci_conf | (devfn << 8) | (where & 0xfc)); + tmp = LEON3_BYPASS_LOAD_PA(pci_conf); + + /* check if master abort was received */ + if (REGLOAD(priv->regs->cfg_stat) & CFGSTAT_CTO) { + *val = 0xffffffff; + /* Clear Master abort bit in PCI cfg space (is set) */ + tmp = REGLOAD(priv->regs->stat_cmd); + grpci1_cfg_w32(priv, TGT, 0, PCI_COMMAND, tmp); + } else { + /* Bus always little endian (unaffected by byte-swapping) */ + *val = flip_dword(tmp); + } + + return 0; +} + +static int grpci1_cfg_r16(struct grpci1_priv *priv, unsigned int bus, + unsigned int devfn, int where, u32 *val) +{ + u32 v; + int ret; + + if (where & 0x1) + return -EINVAL; + ret = grpci1_cfg_r32(priv, bus, devfn, where & ~0x3, &v); + *val = 0xffff & (v >> (8 * (where & 0x3))); + return ret; +} + +static int grpci1_cfg_r8(struct grpci1_priv *priv, unsigned int bus, + unsigned int devfn, int where, u32 *val) +{ + u32 v; + int ret; + + ret = grpci1_cfg_r32(priv, bus, devfn, where & ~0x3, &v); + *val = 0xff & (v >> (8 * (where & 3))); + + return ret; +} + +static int grpci1_cfg_w32(struct grpci1_priv *priv, unsigned int bus, + unsigned int devfn, int where, u32 val) +{ + unsigned int *pci_conf; + u32 cfg; + + if (where & 0x3) + return -EINVAL; + + if (bus == 0) { + devfn += (0x8 * 6); /* start at AD16=Device0 */ + } else if (bus == TGT) { + bus = 0; + devfn = 0; /* special case: bridge controller itself */ + } + + /* Select bus */ + cfg = REGLOAD(priv->regs->cfg_stat); + REGSTORE(priv->regs->cfg_stat, (cfg & ~(0xf << 23)) | (bus << 23)); + + pci_conf = (unsigned int *) (priv->pci_conf | + (devfn << 8) | (where & 0xfc)); + LEON3_BYPASS_STORE_PA(pci_conf, flip_dword(val)); + + return 0; +} + +static int grpci1_cfg_w16(struct grpci1_priv *priv, unsigned int bus, + unsigned int devfn, int where, u32 val) +{ + int ret; + u32 v; + + if (where & 0x1) + return -EINVAL; + ret = grpci1_cfg_r32(priv, bus, devfn, where&~3, &v); + if (ret) + return ret; + v = (v & ~(0xffff << (8 * (where & 0x3)))) | + ((0xffff & val) << (8 * (where & 0x3))); + return grpci1_cfg_w32(priv, bus, devfn, where & ~0x3, v); +} + +static int grpci1_cfg_w8(struct grpci1_priv *priv, unsigned int bus, + unsigned int devfn, int where, u32 val) +{ + int ret; + u32 v; + + ret = grpci1_cfg_r32(priv, bus, devfn, where & ~0x3, &v); + if (ret != 0) + return ret; + v = (v & ~(0xff << (8 * (where & 0x3)))) | + ((0xff & val) << (8 * (where & 0x3))); + return grpci1_cfg_w32(priv, bus, devfn, where & ~0x3, v); +} + +/* Read from Configuration Space. When entering here the PCI layer has taken + * the pci_lock spinlock and IRQ is off. + */ +static int grpci1_read_config(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *val) +{ + struct grpci1_priv *priv = grpci1priv; + unsigned int busno = bus->number; + int ret; + + if (PCI_SLOT(devfn) > 15 || busno > 15) { + *val = ~0; + return 0; + } + + switch (size) { + case 1: + ret = grpci1_cfg_r8(priv, busno, devfn, where, val); + break; + case 2: + ret = grpci1_cfg_r16(priv, busno, devfn, where, val); + break; + case 4: + ret = grpci1_cfg_r32(priv, busno, devfn, where, val); + break; + default: + ret = -EINVAL; + break; + } + +#ifdef GRPCI1_DEBUG_CFGACCESS + printk(KERN_INFO + "grpci1_read_config: [%02x:%02x:%x] ofs=%d val=%x size=%d\n", + busno, PCI_SLOT(devfn), PCI_FUNC(devfn), where, *val, size); +#endif + + return ret; +} + +/* Write to Configuration Space. When entering here the PCI layer has taken + * the pci_lock spinlock and IRQ is off. + */ +static int grpci1_write_config(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + struct grpci1_priv *priv = grpci1priv; + unsigned int busno = bus->number; + + if (PCI_SLOT(devfn) > 15 || busno > 15) + return 0; + +#ifdef GRPCI1_DEBUG_CFGACCESS + printk(KERN_INFO + "grpci1_write_config: [%02x:%02x:%x] ofs=%d size=%d val=%x\n", + busno, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, val); +#endif + + switch (size) { + default: + return -EINVAL; + case 1: + return grpci1_cfg_w8(priv, busno, devfn, where, val); + case 2: + return grpci1_cfg_w16(priv, busno, devfn, where, val); + case 4: + return grpci1_cfg_w32(priv, busno, devfn, where, val); + } +} + +static struct pci_ops grpci1_ops = { + .read = grpci1_read_config, + .write = grpci1_write_config, +}; + +/* GENIRQ IRQ chip implementation for grpci1 irqmode=0..2. In configuration + * 3 where all PCI Interrupts has a separate IRQ on the system IRQ controller + * this is not needed and the standard IRQ controller can be used. + */ + +static void grpci1_mask_irq(struct irq_data *data) +{ + u32 irqidx; + struct grpci1_priv *priv = grpci1priv; + + irqidx = (u32)data->chip_data - 1; + if (irqidx > 3) /* only mask PCI interrupts here */ + return; + irqidx += IRQ_MASK_BIT; + + REGSTORE(priv->regs->irq, REGLOAD(priv->regs->irq) & ~(1 << irqidx)); +} + +static void grpci1_unmask_irq(struct irq_data *data) +{ + u32 irqidx; + struct grpci1_priv *priv = grpci1priv; + + irqidx = (u32)data->chip_data - 1; + if (irqidx > 3) /* only unmask PCI interrupts here */ + return; + irqidx += IRQ_MASK_BIT; + + REGSTORE(priv->regs->irq, REGLOAD(priv->regs->irq) | (1 << irqidx)); +} + +static unsigned int grpci1_startup_irq(struct irq_data *data) +{ + grpci1_unmask_irq(data); + return 0; +} + +static void grpci1_shutdown_irq(struct irq_data *data) +{ + grpci1_mask_irq(data); +} + +static struct irq_chip grpci1_irq = { + .name = "grpci1", + .irq_startup = grpci1_startup_irq, + .irq_shutdown = grpci1_shutdown_irq, + .irq_mask = grpci1_mask_irq, + .irq_unmask = grpci1_unmask_irq, +}; + +/* Handle one or multiple IRQs from the PCI core */ +static void grpci1_pci_flow_irq(unsigned int irq, struct irq_desc *desc) +{ + struct grpci1_priv *priv = grpci1priv; + int i, ack = 0; + unsigned int irqreg; + + irqreg = REGLOAD(priv->regs->irq); + irqreg = (irqreg >> IRQ_MASK_BIT) & irqreg; + + /* Error Interrupt? */ + if (irqreg & IRQ_ALL_ERRORS) { + generic_handle_irq(priv->irq_err); + ack = 1; + } + + /* PCI Interrupt? */ + if (irqreg & IRQ_INTX) { + /* Call respective PCI Interrupt handler */ + for (i = 0; i < 4; i++) { + if (irqreg & (1 << i)) + generic_handle_irq(priv->irq_map[i]); + } + ack = 1; + } + + /* + * Call "first level" IRQ chip end-of-irq handler. It will ACK LEON IRQ + * Controller, this must be done after IRQ sources have been handled to + * avoid double IRQ generation + */ + if (ack) + desc->irq_data.chip->irq_eoi(&desc->irq_data); +} + +/* Create a virtual IRQ */ +static unsigned int grpci1_build_device_irq(unsigned int irq) +{ + unsigned int virq = 0, pil; + + pil = 1 << 8; + virq = irq_alloc(irq, pil); + if (virq == 0) + goto out; + + irq_set_chip_and_handler_name(virq, &grpci1_irq, handle_simple_irq, + "pcilvl"); + irq_set_chip_data(virq, (void *)irq); + +out: + return virq; +} + +/* + * Initialize mappings AMBA<->PCI, clear IRQ state, setup PCI interface + * + * Target BARs: + * BAR0: unused in this implementation + * BAR1: peripheral DMA to host's memory (size at least 256MByte) + * BAR2..BAR5: not implemented in hardware + */ +void grpci1_hw_init(struct grpci1_priv *priv) +{ + u32 ahbadr, bar_sz, data, pciadr; + struct grpci1_regs *regs = priv->regs; + + /* set 1:1 mapping between AHB -> PCI memory space */ + REGSTORE(regs->cfg_stat, priv->pci_area & 0xf0000000); + + /* map PCI accesses to target BAR1 to Linux kernel memory 1:1 */ + ahbadr = 0xf0000000 & (u32)__pa(PAGE_ALIGN((unsigned long) &_end)); + REGSTORE(regs->page1, ahbadr); + + /* translate I/O accesses to 0, I/O Space always @ PCI low 64Kbytes */ + REGSTORE(regs->iomap, REGLOAD(regs->iomap) & 0x0000ffff); + + /* disable and clear pending interrupts */ + REGSTORE(regs->irq, 0); + + /* Setup BAR0 outside access range so that it does not conflict with + * peripheral DMA. There is no need to set up the PAGE0 register. + */ + grpci1_cfg_w32(priv, TGT, 0, PCI_BASE_ADDRESS_0, 0xffffffff); + grpci1_cfg_r32(priv, TGT, 0, PCI_BASE_ADDRESS_0, &bar_sz); + bar_sz = ~bar_sz + 1; + pciadr = priv->pci_area - bar_sz; + grpci1_cfg_w32(priv, TGT, 0, PCI_BASE_ADDRESS_0, pciadr); + + /* + * Setup the Host's PCI Target BAR1 for other peripherals to access, + * and do DMA to the host's memory. + */ + grpci1_cfg_w32(priv, TGT, 0, PCI_BASE_ADDRESS_1, ahbadr); + + /* + * Setup Latency Timer and cache line size. Default cache line + * size will result in poor performance (256 word fetches), 0xff + * will set it according to the max size of the PCI FIFO. + */ + grpci1_cfg_w8(priv, TGT, 0, PCI_CACHE_LINE_SIZE, 0xff); + grpci1_cfg_w8(priv, TGT, 0, PCI_LATENCY_TIMER, 0x40); + + /* set as bus master, enable pci memory responses, clear status bits */ + grpci1_cfg_r32(priv, TGT, 0, PCI_COMMAND, &data); + data |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + grpci1_cfg_w32(priv, TGT, 0, PCI_COMMAND, data); +} + +static irqreturn_t grpci1_jump_interrupt(int irq, void *arg) +{ + struct grpci1_priv *priv = arg; + dev_err(priv->dev, "Jump IRQ happened\n"); + return IRQ_NONE; +} + +/* Handle GRPCI1 Error Interrupt */ +static irqreturn_t grpci1_err_interrupt(int irq, void *arg) +{ + struct grpci1_priv *priv = arg; + u32 status; + + grpci1_cfg_r16(priv, TGT, 0, PCI_STATUS, &status); + status &= priv->pci_err_mask; + + if (status == 0) + return IRQ_NONE; + + if (status & PCI_STATUS_PARITY) + dev_err(priv->dev, "Data Parity Error\n"); + + if (status & PCI_STATUS_SIG_TARGET_ABORT) + dev_err(priv->dev, "Signalled Target Abort\n"); + + if (status & PCI_STATUS_REC_TARGET_ABORT) + dev_err(priv->dev, "Received Target Abort\n"); + + if (status & PCI_STATUS_REC_MASTER_ABORT) + dev_err(priv->dev, "Received Master Abort\n"); + + if (status & PCI_STATUS_SIG_SYSTEM_ERROR) + dev_err(priv->dev, "Signalled System Error\n"); + + if (status & PCI_STATUS_DETECTED_PARITY) + dev_err(priv->dev, "Parity Error\n"); + + /* Clear handled INT TYPE IRQs */ + grpci1_cfg_w16(priv, TGT, 0, PCI_STATUS, status); + + return IRQ_HANDLED; +} + +static int grpci1_of_probe(struct platform_device *ofdev) +{ + struct grpci1_regs *regs; + struct grpci1_priv *priv; + int err, len; + const int *tmp; + u32 cfg, size, err_mask; + struct resource *res; + + if (grpci1priv) { + dev_err(&ofdev->dev, "only one GRPCI1 supported\n"); + return -ENODEV; + } + + if (ofdev->num_resources < 3) { + dev_err(&ofdev->dev, "not enough APB/AHB resources\n"); + return -EIO; + } + + priv = devm_kzalloc(&ofdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) { + dev_err(&ofdev->dev, "memory allocation failed\n"); + return -ENOMEM; + } + platform_set_drvdata(ofdev, priv); + priv->dev = &ofdev->dev; + + /* find device register base address */ + res = platform_get_resource(ofdev, IORESOURCE_MEM, 0); + regs = devm_request_and_ioremap(&ofdev->dev, res); + if (!regs) { + dev_err(&ofdev->dev, "io-regs mapping failed\n"); + return -EADDRNOTAVAIL; + } + + /* + * check that we're in Host Slot and that we can act as a Host Bridge + * and not only as target/peripheral. + */ + cfg = REGLOAD(regs->cfg_stat); + if ((cfg & CFGSTAT_HOST) == 0) { + dev_err(&ofdev->dev, "not in host system slot\n"); + return -EIO; + } + + /* check that BAR1 support 256 MByte so that we can map kernel space */ + REGSTORE(regs->page1, 0xffffffff); + size = ~REGLOAD(regs->page1) + 1; + if (size < 0x10000000) { + dev_err(&ofdev->dev, "BAR1 must be at least 256MByte\n"); + return -EIO; + } + + /* hardware must support little-endian PCI (byte-twisting) */ + if ((REGLOAD(regs->page0) & PAGE0_BTEN) == 0) { + dev_err(&ofdev->dev, "byte-twisting is required\n"); + return -EIO; + } + + priv->regs = regs; + priv->irq = irq_of_parse_and_map(ofdev->dev.of_node, 0); + dev_info(&ofdev->dev, "host found at 0x%p, irq%d\n", regs, priv->irq); + + /* Find PCI Memory, I/O and Configuration Space Windows */ + priv->pci_area = ofdev->resource[1].start; + priv->pci_area_end = ofdev->resource[1].end+1; + priv->pci_io = ofdev->resource[2].start; + priv->pci_conf = ofdev->resource[2].start + 0x10000; + priv->pci_conf_end = priv->pci_conf + 0x10000; + priv->pci_io_va = (unsigned long)ioremap(priv->pci_io, 0x10000); + if (!priv->pci_io_va) { + dev_err(&ofdev->dev, "unable to map PCI I/O area\n"); + return -EIO; + } + + printk(KERN_INFO + "GRPCI1: MEMORY SPACE [0x%08lx - 0x%08lx]\n" + " I/O SPACE [0x%08lx - 0x%08lx]\n" + " CONFIG SPACE [0x%08lx - 0x%08lx]\n", + priv->pci_area, priv->pci_area_end-1, + priv->pci_io, priv->pci_conf-1, + priv->pci_conf, priv->pci_conf_end-1); + + /* + * I/O Space resources in I/O Window mapped into Virtual Adr Space + * We never use low 4KB because some devices seem have problems using + * address 0. + */ + priv->info.io_space.name = "GRPCI1 PCI I/O Space"; + priv->info.io_space.start = priv->pci_io_va + 0x1000; + priv->info.io_space.end = priv->pci_io_va + 0x10000 - 1; + priv->info.io_space.flags = IORESOURCE_IO; + + /* + * grpci1 has no prefetchable memory, map everything as + * non-prefetchable memory + */ + priv->info.mem_space.name = "GRPCI1 PCI MEM Space"; + priv->info.mem_space.start = priv->pci_area; + priv->info.mem_space.end = priv->pci_area_end - 1; + priv->info.mem_space.flags = IORESOURCE_MEM; + + if (request_resource(&iomem_resource, &priv->info.mem_space) < 0) { + dev_err(&ofdev->dev, "unable to request PCI memory area\n"); + err = -ENOMEM; + goto err1; + } + + if (request_resource(&ioport_resource, &priv->info.io_space) < 0) { + dev_err(&ofdev->dev, "unable to request PCI I/O area\n"); + err = -ENOMEM; + goto err2; + } + + /* setup maximum supported PCI buses */ + priv->info.busn.name = "GRPCI1 busn"; + priv->info.busn.start = 0; + priv->info.busn.end = 15; + + grpci1priv = priv; + + /* Initialize hardware */ + grpci1_hw_init(priv); + + /* + * Get PCI Interrupt to System IRQ mapping and setup IRQ handling + * Error IRQ. All PCI and PCI-Error interrupts are shared using the + * same system IRQ. + */ + leon_update_virq_handling(priv->irq, grpci1_pci_flow_irq, "pcilvl", 0); + + priv->irq_map[0] = grpci1_build_device_irq(1); + priv->irq_map[1] = grpci1_build_device_irq(2); + priv->irq_map[2] = grpci1_build_device_irq(3); + priv->irq_map[3] = grpci1_build_device_irq(4); + priv->irq_err = grpci1_build_device_irq(5); + + printk(KERN_INFO " PCI INTA..D#: IRQ%d, IRQ%d, IRQ%d, IRQ%d\n", + priv->irq_map[0], priv->irq_map[1], priv->irq_map[2], + priv->irq_map[3]); + + /* Enable IRQs on LEON IRQ controller */ + err = devm_request_irq(&ofdev->dev, priv->irq, grpci1_jump_interrupt, 0, + "GRPCI1_JUMP", priv); + if (err) { + dev_err(&ofdev->dev, "ERR IRQ request failed: %d\n", err); + goto err3; + } + + /* Setup IRQ handler for access errors */ + err = devm_request_irq(&ofdev->dev, priv->irq_err, + grpci1_err_interrupt, IRQF_SHARED, "GRPCI1_ERR", + priv); + if (err) { + dev_err(&ofdev->dev, "ERR VIRQ request failed: %d\n", err); + goto err3; + } + + tmp = of_get_property(ofdev->dev.of_node, "all_pci_errors", &len); + if (tmp && (len == 4)) { + priv->pci_err_mask = ALL_PCI_ERRORS; + err_mask = IRQ_ALL_ERRORS << IRQ_MASK_BIT; + } else { + priv->pci_err_mask = DEF_PCI_ERRORS; + err_mask = IRQ_DEF_ERRORS << IRQ_MASK_BIT; + } + + /* + * Enable Error Interrupts. PCI interrupts are unmasked once request_irq + * is called by the PCI Device drivers + */ + REGSTORE(regs->irq, err_mask); + + /* Init common layer and scan buses */ + priv->info.ops = &grpci1_ops; + priv->info.map_irq = grpci1_map_irq; + leon_pci_init(ofdev, &priv->info); + + return 0; + +err3: + release_resource(&priv->info.io_space); +err2: + release_resource(&priv->info.mem_space); +err1: + iounmap((void *)priv->pci_io_va); + grpci1priv = NULL; + return err; +} + +static struct of_device_id grpci1_of_match[] = { + { + .name = "GAISLER_PCIFBRG", + }, + { + .name = "01_014", + }, + {}, +}; + +static struct platform_driver grpci1_of_driver = { + .driver = { + .name = "grpci1", + .owner = THIS_MODULE, + .of_match_table = grpci1_of_match, + }, + .probe = grpci1_of_probe, +}; + +static int __init grpci1_init(void) +{ + return platform_driver_register(&grpci1_of_driver); +} + +subsys_initcall(grpci1_init);