@@ -1353,7 +1353,7 @@ static void e1000_class_init(ObjectClass *klass, void *data)
k->init = pci_e1000_init;
k->exit = pci_e1000_uninit;
- k->romfile = "pxe-e1000.rom";
+ k->romfile = "efi-e1000.rom";
k->vendor_id = PCI_VENDOR_ID_INTEL;
k->device_id = E1000_DEVID;
k->revision = 0x03;
@@ -766,7 +766,7 @@ static void ne2000_class_init(ObjectClass *klass, void *data)
k->init = pci_ne2000_init;
k->exit = pci_ne2000_exit;
- k->romfile = "pxe-ne2k_pci.rom",
+ k->romfile = "efi-ne2k_pci.rom",
k->vendor_id = PCI_VENDOR_ID_REALTEK;
k->device_id = PCI_DEVICE_ID_REALTEK_8029;
k->class_id = PCI_CLASS_NETWORK_ETHERNET;
@@ -212,10 +212,30 @@ int e820_add_entry(uint64_t, uint64_t, uint32_t);
.driver = "ide-drive",\
.property = "discard_granularity",\
.value = stringify(0),\
- },{\
+ },{\
.driver = "virtio-blk-pci",\
.property = "discard_granularity",\
.value = stringify(0),\
- }
+ },{\
+ .driver = "e1000",\
+ .property = "romfile",\
+ .value = "pxe-e1000.rom",\
+ },{\
+ .driver = "ne2k_pci",\
+ .property = "romfile",\
+ .value = "pxe-ne2k_pci.rom",\
+ },{\
+ .driver = "pcnet",\
+ .property = "romfile",\
+ .value = "pxe-pcnet.rom",\
+ },{\
+ .driver = "rtl8139",\
+ .property = "romfile",\
+ .value = "pxe-rtl8139.rom",\
+ },{\
+ .driver = "virtio-net-pci",\
+ .property = "romfile",\
+ .value = "pxe-virtio.rom",\
+ }
#endif
@@ -351,7 +351,7 @@ static void pcnet_class_init(ObjectClass *klass, void *data)
k->init = pci_pcnet_init;
k->exit = pci_pcnet_uninit;
- k->romfile = "pxe-pcnet.rom",
+ k->romfile = "efi-pcnet.rom",
k->vendor_id = PCI_VENDOR_ID_AMD;
k->device_id = PCI_DEVICE_ID_AMD_LANCE;
k->revision = 0x10;
@@ -3530,7 +3530,7 @@ static void rtl8139_class_init(ObjectClass *klass, void *data)
k->init = pci_rtl8139_init;
k->exit = pci_rtl8139_uninit;
- k->romfile = "pxe-rtl8139.rom";
+ k->romfile = "efi-rtl8139.rom";
k->vendor_id = PCI_VENDOR_ID_REALTEK;
k->device_id = PCI_DEVICE_ID_REALTEK_8139;
k->revision = RTL8139_PCI_REVID; /* >=0x20 is for 8139C+ */
@@ -1137,7 +1137,7 @@ static void virtio_net_class_init(ObjectClass *klass, void *data)
k->init = virtio_net_init_pci;
k->exit = virtio_net_exit_pci;
- k->romfile = "pxe-virtio.rom";
+ k->romfile = "efi-virtio.rom";
k->vendor_id = PCI_VENDOR_ID_REDHAT_QUMRANET;
k->device_id = PCI_DEVICE_ID_VIRTIO_NET;
k->revision = VIRTIO_PCI_ABI_VERSION;
All PCI nics are switched to EFI-enabled roms by default. They are composed from three images (legacy, efi ia32 & efi x86), so classic pxe booting will continue to work. Exception: eepro100 is not switched, it uses a single rom for all emulated eepro100 variants, then goes patch the rom header on the fly with the correct PCI IDs. I doubt that will work as-is with the efi roms. Keep old roms for 1.4+older machine types via compat properties, needed because the efi-enabled roms are larger so the pci rom bar size would change. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> --- hw/e1000.c | 2 +- hw/ne2000.c | 2 +- hw/pc.h | 24 ++++++++++++++++++++++-- hw/pcnet-pci.c | 2 +- hw/rtl8139.c | 2 +- hw/virtio-pci.c | 2 +- 6 files changed, 27 insertions(+), 7 deletions(-)