diff mbox

[net,2/3] bnx2x: Fix KR2 link

Message ID 1362006406-2489-3-git-send-email-yanivr@broadcom.com
State Accepted, archived
Delegated to: David Miller
Headers show

Commit Message

Yaniv Rosner Feb. 27, 2013, 11:06 p.m. UTC 
Fix KR2 link down problem after reboot when link speed is reconfigured via ethtool.
Since 1G/10G support link speed were missing by default, 1G/10G link speed were
not advertised.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
---
 .../net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c    |    6 ++++++
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c   |    2 ++
 2 files changed, 8 insertions(+), 0 deletions(-)
diff mbox

Patch

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
index 9a674b1..edfa67a 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
@@ -281,6 +281,8 @@  static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 			cmd->lp_advertising |= ADVERTISED_2500baseX_Full;
 		if (status & LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE)
 			cmd->lp_advertising |= ADVERTISED_10000baseT_Full;
+		if (status & LINK_STATUS_LINK_PARTNER_20GXFD_CAPABLE)
+			cmd->lp_advertising |= ADVERTISED_20000baseKR2_Full;
 	}
 
 	cmd->maxtxpkt = 0;
@@ -463,6 +465,10 @@  static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 						ADVERTISED_10000baseKR_Full))
 				bp->link_params.speed_cap_mask[cfg_idx] |=
 					PORT_HW_CFG_SPEED_CAPABILITY_D0_10G;
+
+			if (cmd->advertising & ADVERTISED_20000baseKR2_Full)
+				bp->link_params.speed_cap_mask[cfg_idx] |=
+					PORT_HW_CFG_SPEED_CAPABILITY_D0_20G;
 		}
 	} else { /* forced speed */
 		/* advertise the requested speed and duplex if supported */
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index 4719ab1..bf69c53 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -11851,6 +11851,8 @@  static int bnx2x_populate_int_phy(struct bnx2x *bp, u32 shmem_base, u8 port,
 			phy->media_type = ETH_PHY_KR;
 			phy->flags |= FLAGS_WC_DUAL_MODE;
 			phy->supported &= (SUPPORTED_20000baseKR2_Full |
+					   SUPPORTED_10000baseT_Full |
+					   SUPPORTED_1000baseT_Full |
 					   SUPPORTED_Autoneg |
 					   SUPPORTED_FIBRE |
 					   SUPPORTED_Pause |