diff mbox

[U-Boot] am33xx: Update DDR3 EMIF configuration sequence

Message ID 1361914633-19873-1-git-send-email-trini@ti.com
State Accepted
Delegated to: Tom Rini
Headers show

Commit Message

Tom Rini Feb. 26, 2013, 9:37 p.m. UTC 
Based on
http://processors.wiki.ti.com/index.php/AM335x_EMIF_Configuration_tips
we need to re-work our sequence in config_sdram slightly to match what
the TRM describes as the correct sequence.  In our current (incorrect)
sequence some edge cases may fail to initalize correctly.

Signed-off-by: Tom Rini <trini@ti.com>
---
 arch/arm/cpu/armv7/am33xx/ddr.c |   12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/cpu/armv7/am33xx/ddr.c b/arch/arm/cpu/armv7/am33xx/ddr.c
index fd9fc4a..448cc40 100644
--- a/arch/arm/cpu/armv7/am33xx/ddr.c
+++ b/arch/arm/cpu/armv7/am33xx/ddr.c
@@ -45,13 +45,19 @@  static struct ddr_cmdtctrl *ioctrl_reg = {
  */
 void config_sdram(const struct emif_regs *regs)
 {
-	writel(regs->ref_ctrl, &emif_reg->emif_sdram_ref_ctrl);
-	writel(regs->ref_ctrl, &emif_reg->emif_sdram_ref_ctrl_shdw);
-	if (regs->zq_config){
+	if (regs->zq_config) {
+		/*
+		 * A value of 0x2800 for the REF CTRL will give us
+		 * about 570us for a delay, which will be long enough
+		 * to configure things.
+		 */
+		writel(0x2800, &emif_reg->emif_sdram_ref_ctrl);
 		writel(regs->zq_config, &emif_reg->emif_zq_config);
 		writel(regs->sdram_config, &cstat->secure_emif_sdram_config);
 	}
 	writel(regs->sdram_config, &emif_reg->emif_sdram_config);
+	writel(regs->ref_ctrl, &emif_reg->emif_sdram_ref_ctrl);
+	writel(regs->ref_ctrl, &emif_reg->emif_sdram_ref_ctrl_shdw);
 }
 
 /**