diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
index 5630956..beeecbd 100644
--- a/hw/arm/Makefile.objs
+++ b/hw/arm/Makefile.objs
@@ -50,3 +50,4 @@ obj-y += fti2c010.o
 obj-y += ftssp010.o
 obj-y += ftgmac100.o
 obj-y += ftlcdc200.o
+obj-y += fttsc010.o
diff --git a/hw/arm/faraday_a369_soc.c b/hw/arm/faraday_a369_soc.c
index d39bf1d..61cfb93 100644
--- a/hw/arm/faraday_a369_soc.c
+++ b/hw/arm/faraday_a369_soc.c
@@ -262,6 +262,9 @@ a369soc_device_init(FaradaySoCState *s)
                           pic[23], /* FIFO Under-Run */
                           pic[22], /* AHB Bus Error */
                           NULL);
+
+    /* fttsc010 */
+    sysbus_create_simple("fttsc010", 0x92400000, pic[19]);
 }
 
 static int a369soc_init(SysBusDevice *busdev)
diff --git a/hw/arm/fttsc010.c b/hw/arm/fttsc010.c
new file mode 100644
index 0000000..c8bf3e3
--- /dev/null
+++ b/hw/arm/fttsc010.c
@@ -0,0 +1,257 @@
+/*
+ * Faraday FTTSC010 emulator.
+ *
+ * Copyright (c) 2012 Faraday Technology
+ * Written by Dante Su <dantesu@faraday-tech.com>
+ *
+ * This code is licensed under GNU GPL v2+.
+ */
+
+#include "hw/hw.h"
+#include "hw/sysbus.h"
+#include "hw/devices.h"
+#include "ui/console.h"
+#include "qemu/timer.h"
+#include "sysemu/sysemu.h"
+
+#include "faraday.h"
+#include "fttsc010.h"
+
+#define X_AXIS_DMAX     3470
+#define X_AXIS_MIN      290
+#define Y_AXIS_DMAX     3450
+#define Y_AXIS_MIN      200
+
+#define ADS_XPOS(x, y)  \
+    (X_AXIS_MIN + ((X_AXIS_DMAX * (x)) >> 15))
+#define ADS_YPOS(x, y)  \
+    (Y_AXIS_MIN + ((Y_AXIS_DMAX * (y)) >> 15))
+#define ADS_Z1POS(x, y) \
+    (8)
+#define ADS_Z2POS(x, y) \
+    ((1600 + ADS_XPOS(x, y)) * ADS_Z1POS(x, y) / ADS_XPOS(x, y))
+
+#define TYPE_FTTSC010   "fttsc010"
+
+#define CFG_REGSIZE     (0x3c / 4)
+
+typedef struct Fttsc010State {
+    SysBusDevice busdev;
+    MemoryRegion iomem;
+    qemu_irq irq;
+
+    uint64_t interval;
+    QEMUTimer *qtimer;
+
+    int x, y;
+    int z1, z2;
+    uint32_t freq;
+
+    /* HW registers */
+    uint32_t regs[CFG_REGSIZE];
+} Fttsc010State;
+
+#define FTTSC010(obj) \
+    OBJECT_CHECK(Fttsc010State, obj, TYPE_FTTSC010)
+
+#define TSC_REG32(s, off) \
+    *(uint32_t *)((uint8_t *)(s)->regs + (off))
+
+static void fttsc010_update_irq(Fttsc010State *s)
+{
+    qemu_set_irq(s->irq, !!(TSC_REG32(s, REG_IMR) & TSC_REG32(s, REG_ISR)));
+}
+
+static uint64_t
+fttsc010_mem_read(void *opaque, hwaddr addr, unsigned size)
+{
+    uint32_t ret = 0;
+    Fttsc010State *s = FTTSC010(opaque);
+
+    switch (addr) {
+    case REG_CR ... REG_DCR:
+        ret = s->regs[addr / 4];
+        break;
+    case REG_XYR:
+        ret = deposit32(ret,  0, 12, s->x);
+        ret = deposit32(ret, 16, 12, s->y);
+        break;
+    case REG_ZR:
+        ret = deposit32(ret,  0, 12, s->z1);
+        ret = deposit32(ret, 16, 12, s->z2);
+        break;
+    default:
+        break;
+    }
+
+    return ret;
+}
+
+static void
+fttsc010_mem_write(void *opaque, hwaddr addr, uint64_t val, unsigned size)
+{
+    uint32_t dly, sdiv, mdiv;
+    Fttsc010State *s = FTTSC010(opaque);
+
+    switch (addr) {
+    case REG_CR:
+        TSC_REG32(s, REG_CR) = (uint32_t)val;
+        if (TSC_REG32(s, REG_CR) & (CR_AS | CR_RD1)) {
+            /* ADC conversion delay with frame number */
+            dly = extract32(TSC_REG32(s, REG_DCR), 0, 16);
+            /* ADC sample clock divider */
+            sdiv = extract32(TSC_REG32(s, REG_CSR), 8, 8);
+            /* ADC main clock divider */
+            mdiv = extract32(TSC_REG32(s, REG_CSR), 0, 8);
+            /* Calculate sample rate/timer interval */
+            s->interval = s->freq / ((mdiv + 1) * (sdiv + 1) * (dly + 1) * 64);
+            s->interval = MAX(1ULL, s->interval);
+            qemu_mod_timer(s->qtimer,
+                s->interval + qemu_get_clock_ms(rt_clock));
+        } else {
+            qemu_del_timer(s->qtimer);
+        }
+        break;
+    case REG_ISR:
+        TSC_REG32(s, REG_ISR) &= ~((uint32_t)val);
+        fttsc010_update_irq(s);
+        break;
+    case REG_IMR:
+        TSC_REG32(s, REG_IMR) = (uint32_t)val;
+        fttsc010_update_irq(s);
+        break;
+    case REG_CSR ... REG_DCR:
+        s->regs[addr / 4] = (uint32_t)val;
+        break;
+    default:
+        break;
+    }
+}
+
+static const MemoryRegionOps fttsc010_mem_ops = {
+    .read  = fttsc010_mem_read,
+    .write = fttsc010_mem_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+static void fttsc010_timer_tick(void *opaque)
+{
+    Fttsc010State *s = FTTSC010(opaque);
+
+    /* update isr for auto-scan */
+    if (TSC_REG32(s, REG_CR) & CR_AS) {
+        TSC_REG32(s, REG_ISR) |= ISR_AS;
+    }
+
+    /* turn it off, when it's under one-shot mode */
+    TSC_REG32(s, REG_CR) &= ~CR_RD1;
+
+    /* update irq signal */
+    fttsc010_update_irq(s);
+
+    /* reschedule for next auto-scan */
+    if (TSC_REG32(s, REG_CR) & CR_AS) {
+        qemu_mod_timer(s->qtimer, s->interval + qemu_get_clock_ms(rt_clock));
+    }
+}
+
+static void
+fttsc010_touchscreen_event(void *opaque, int x, int y, int z, int bt)
+{
+    Fttsc010State *s = FTTSC010(opaque);
+
+    if (bt) {
+        /* button pressed */
+        x = 0x7fff - x;
+        s->x  = ADS_XPOS(x, y);
+        s->y  = ADS_YPOS(x, y);
+        s->z1 = ADS_Z1POS(x, y);
+        s->z2 = ADS_Z2POS(x, y);
+    } else {
+        /* button released */
+        s->z1 = 0;
+        s->z2 = 0;
+    }
+}
+
+static void fttsc010_reset(DeviceState *ds)
+{
+    SysBusDevice *busdev = SYS_BUS_DEVICE(ds);
+    Fttsc010State *s = FTTSC010(FROM_SYSBUS(Fttsc010State, busdev));
+
+    memset(s->regs, 0, sizeof(s->regs));
+    TSC_REG32(s, REG_REVR) = 0x00010000;    /* rev. 1.0.0 */
+
+    /* initialize touch sample interval to 10 ms */
+    TSC_REG32(s, REG_CSR) = CSR_SDIV(16) | CSR_MDIV(5);
+    TSC_REG32(s, REG_DCR) = DCR_DLY(100);
+
+    s->x  = 0;
+    s->y  = 0;
+    s->z1 = 0;
+    s->z2 = 0;
+
+    qemu_set_irq(s->irq, 0);
+}
+
+static int fttsc010_init(SysBusDevice *dev)
+{
+    Fttsc010State *s = FTTSC010(FROM_SYSBUS(Fttsc010State, dev));
+
+    s->qtimer   = qemu_new_timer_ms(rt_clock, fttsc010_timer_tick, s);
+
+    memory_region_init_io(&s->iomem,
+                          &fttsc010_mem_ops,
+                          s,
+                          TYPE_FTTSC010,
+                          0x1000);
+    sysbus_init_mmio(dev, &s->iomem);
+    sysbus_init_irq(dev, &s->irq);
+
+    qemu_add_mouse_event_handler(fttsc010_touchscreen_event, s, 1,
+                    "QEMU FTTSC010-driven Touchscreen");
+
+    return 0;
+}
+
+static const VMStateDescription vmstate_fttsc010 = {
+    .name = TYPE_FTTSC010,
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .minimum_version_id_old = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT32_ARRAY(regs, Fttsc010State, CFG_REGSIZE),
+        VMSTATE_END_OF_LIST(),
+    }
+};
+
+static Property properties_fttsc010[] = {
+    DEFINE_PROP_UINT32("freq", Fttsc010State, freq, 66000000),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
+static void fttsc010_class_init(ObjectClass *klass, void *data)
+{
+    SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    k->init     = fttsc010_init;
+    dc->reset   = fttsc010_reset;
+    dc->vmsd    = &vmstate_fttsc010;
+    dc->props   = properties_fttsc010;
+    dc->no_user = 1;
+}
+
+static const TypeInfo fttsc010_info = {
+    .name          = TYPE_FTTSC010,
+    .parent        = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(Fttsc010State),
+    .class_init    = fttsc010_class_init,
+};
+
+static void fttsc010_register_types(void)
+{
+    type_register_static(&fttsc010_info);
+}
+
+type_init(fttsc010_register_types)
diff --git a/hw/arm/fttsc010.h b/hw/arm/fttsc010.h
new file mode 100644
index 0000000..7c8070d
--- /dev/null
+++ b/hw/arm/fttsc010.h
@@ -0,0 +1,37 @@
+/*
+ * Faraday FTTSC010 touchscreen driver
+ *
+ * Copyright (C) 2012 Faraday Technology
+ * Written by Dante Su <dantesu@faraday-tech.com>
+ *
+ * This file is licensed under GNU GPL v2+.
+ */
+
+#ifndef HW_ARM_FTTSC010_H
+#define HW_ARM_FTTSC010_H
+
+#define REG_CR      0x00  /* Control Register */
+#define REG_ISR     0x04  /* Interrupt Status Register */
+#define REG_IMR     0x08  /* Interrupt Mask Register */
+#define REG_REVR    0x0C  /* Revision Register */
+#define REG_CSR     0x30  /* Clock & Sample Rate Register */
+#define REG_PFR     0x34  /* Panel Function Register */
+#define REG_DCR     0x38  /* Delay Control Register */
+#define REG_XYR     0x3C  /* Touchscreen X,Y-Axis Register */
+#define REG_ZR      0x4C  /* Touchscreen Z-Axis (Pressure) Register */
+
+#define CR_AS       BIT(31) /* Auto-scan enable */
+#define CR_RD1      BIT(30) /* Single read enabled */
+#define CR_CHDLY(x) BIT(16 + (x % 7)) /* ADC channel x delay enabled */
+#define CR_APWRDN   BIT(9)  /* ADC auto power down mode */
+#define CR_PWRDN    BIT(8)  /* ADC and IPGA power down */
+#define CR_ICS(x)   ((x) & 0xf) /* ADC analog input channel select */
+
+#define CSR_SDIV(x) (((x) & 0xff) << 8) /* ADC sample clock divider */
+#define CSR_MDIV(x) (((x) & 0xff) << 0) /* ADC main clock divider */
+
+#define DCR_DLY(x)  ((x) & 0xffff)      /* ADC conversion delay */
+
+#define ISR_AS      BIT(10) /* Auto-scan cpmplete */
+
+#endif
