Patchwork [U-Boot,v4,07/11] blackfin: bf60x: add board and headers files to support bf609

login
register
mail settings
Submitter Sonic Zhang
Date Feb. 21, 2013, 11:06 a.m.
Message ID <1361444809-22035-8-git-send-email-sonic.adi@gmail.com>
Download mbox | patch
Permalink /patch/222255/
State Accepted
Delegated to: Sonic Zhang
Headers show

Comments

Sonic Zhang - Feb. 21, 2013, 11:06 a.m.
From: Sonic Zhang <sonic.zhang@analog.com>

Board and config header files for bf609-ezkit support.

Signed-off-by: Bob Liu <lliubbo@gmail.com>
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
---
Changes in v4:
- Fix all checkpatch issues except for cpu name bf609-0.0. It is use as the
link flags and is not an error.
- Remove the values for variables in bf609 config headers whose values are useless.

Changes in v3: None
Changes in v2: None

 MAINTAINERS                       |    3 +-
 board/bf609-ezkit/Makefile        |   55 +++++++++++++
 board/bf609-ezkit/bf609-ezkit.c   |   67 +++++++++++++++
 boards.cfg                        |    1 +
 include/configs/bf609-ezkit.h     |  161 +++++++++++++++++++++++++++++++++++++
 include/configs/bfin_adi_common.h |   12 ++--
 6 files changed, 292 insertions(+), 7 deletions(-)
 create mode 100644 board/bf609-ezkit/Makefile
 create mode 100644 board/bf609-ezkit/bf609-ezkit.c
 create mode 100644 include/configs/bf609-ezkit.h

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index 28c052d..76368cf 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1214,7 +1214,7 @@  Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
 #	Board		CPU						#
 #########################################################################
 
-Mike Frysinger <vapier@gentoo.org>
+Sonic Zhang <sonic.adi@gmail.com>
 Blackfin Team <u-boot-devel@blackfin.uclinux.org>
 
 	BF506F-EZKIT	BF506
@@ -1231,6 +1231,7 @@  Blackfin Team <u-boot-devel@blackfin.uclinux.org>
 	BF538F-EZKIT	BF538
 	BF548-EZKIT	BF548
 	BF561-EZKIT	BF561
+	BF609-EZKIT	BF609
 
 M.Hasewinkel (MHA) <info@ssv-embedded.de>
 
diff --git a/board/bf609-ezkit/Makefile b/board/bf609-ezkit/Makefile
new file mode 100644
index 0000000..0bb8fe6
--- /dev/null
+++ b/board/bf609-ezkit/Makefile
@@ -0,0 +1,55 @@ 
+#
+# U-boot - Makefile
+#
+# Copyright (c) 2005-2008 Analog Device Inc.
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS-y	:= $(BOARD).o
+COBJS-$(CONFIG_BFIN_SOFT_SWITCH)   += soft_switch.o
+
+SRCS	:= $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
+SOBJS	:= $(addprefix $(obj),$(SOBJS-y))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(call cmd_link_o_target, $(OBJS) $(SOBJS))
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/bf609-ezkit/bf609-ezkit.c b/board/bf609-ezkit/bf609-ezkit.c
new file mode 100644
index 0000000..0388226
--- /dev/null
+++ b/board/bf609-ezkit/bf609-ezkit.c
@@ -0,0 +1,67 @@ 
+/*
+ * U-boot - main board file
+ *
+ * Copyright (c) 2008-2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <asm/blackfin.h>
+#include <asm/io.h>
+#include <asm/portmux.h>
+#include "soft_switch.h"
+
+int checkboard(void)
+{
+	printf("Board: ADI BF609 EZ-Kit board\n");
+	printf("       Support: http://blackfin.uclinux.org/\n");
+	return 0;
+}
+
+int board_early_init_f(void)
+{
+	static const unsigned short pins[] = {
+		P_A3, P_A4, P_A5, P_A6, P_A7, P_A8, P_A9, P_A10, P_A11, P_A12,
+		P_A13, P_A14, P_A15, P_A16, P_A17, P_A18, P_A19, P_A20, P_A21,
+		P_A22, P_A23, P_A24, P_A25, P_NORCK, 0,
+	};
+	peripheral_request_list(pins, "smc0");
+
+	return 0;
+}
+
+#ifdef CONFIG_DESIGNWARE_ETH
+int board_eth_init(bd_t *bis)
+{
+	int ret = 0;
+
+	if (CONFIG_DW_PORTS & 1) {
+		static const unsigned short pins[] = P_RMII0;
+		if (!peripheral_request_list(pins, "emac0"))
+			ret += designware_initialize(0, EMAC0_MACCFG, 1, 0);
+	}
+	if (CONFIG_DW_PORTS & 2) {
+		static const unsigned short pins[] = P_RMII1;
+		if (!peripheral_request_list(pins, "emac1"))
+			ret += designware_initialize(1, EMAC1_MACCFG, 1, 0);
+	}
+
+	return ret;
+}
+#endif
+
+#ifdef CONFIG_BFIN_SDH
+int board_mmc_init(bd_t *bis)
+{
+	return bfin_mmc_init(bis);
+}
+#endif
+
+/* miscellaneous platform dependent initialisations */
+int misc_init_r(void)
+{
+	printf("other init\n");
+	return setup_board_switches();
+}
diff --git a/boards.cfg b/boards.cfg
index e4b0d44..11060c4 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -356,6 +356,7 @@  bf538f-ezkit                 blackfin    blackfin
 bf548-ezkit                  blackfin    blackfin
 bf561-acvilon                blackfin    blackfin
 bf561-ezkit                  blackfin    blackfin
+bf609-ezkit                  blackfin    blackfin
 blackstamp                   blackfin    blackfin
 blackvme                     blackfin    blackfin
 br4                          blackfin    blackfin
diff --git a/include/configs/bf609-ezkit.h b/include/configs/bf609-ezkit.h
new file mode 100644
index 0000000..6dffab8
--- /dev/null
+++ b/include/configs/bf609-ezkit.h
@@ -0,0 +1,161 @@ 
+/*
+ * U-boot - Configuration file for BF609 EZ-Kit board
+ */
+
+#ifndef __CONFIG_BF609_EZKIT_H__
+#define __CONFIG_BF609_EZKIT_H__
+
+#include <asm/config-pre.h>
+
+/*
+ * Processor Settings
+ */
+#define CONFIG_BFIN_CPU             bf609-0.0
+#define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_PARA
+
+
+/* For ez-board version 1.0, else undef this */
+#define CONFIG_BFIN_BOARD_VERSION_1_0
+
+/*
+ * Clock Settings
+ *	CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
+ *	SCLK = (CLKIN * VCO_MULT) / SYSCLK_DIV
+ *	SCLK0 = SCLK / SCLK0_DIV
+ *	SCLK1 = SCLK / SCLK1_DIV
+ */
+/* CONFIG_CLKIN_HZ is any value in Hz					*/
+#define CONFIG_CLKIN_HZ			(25000000)
+/* CLKIN_HALF controls the DF bit in PLL_CTL      0 = CLKIN		*/
+/*                                                1 = CLKIN / 2		*/
+#define CONFIG_CLKIN_HALF		(0)
+
+/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL		*/
+/* Values can range from 0-127 (where 0 means 128)			*/
+#define CONFIG_VCO_MULT			(20)
+
+/* CCLK_DIV controls the core clock divider				*/
+/* Values can range from 0-31 (where 0 means 32)			*/
+#define CONFIG_CCLK_DIV			(1)
+/* SCLK_DIV controls the system clock divider				*/
+/* Values can range from 0-31 (where 0 means 32)			*/
+#define CONFIG_SCLK_DIV		(4)
+/* Values can range from 0-7 (where 0 means 8)				*/
+#define CONFIG_SCLK0_DIV		(1)
+#define CONFIG_SCLK1_DIV		(1)
+/* DCLK_DIV controls the DDR clock divider				*/
+/* Values can range from 0-31 (where 0 means 32)			*/
+#define CONFIG_DCLK_DIV			(2)
+/* OCLK_DIV controls the output clock divider				*/
+/* Values can range from 0-127 (where 0 means 128)			*/
+#define CONFIG_OCLK_DIV			(16)
+
+/*
+ * Memory Settings
+ */
+#define CONFIG_MEM_SIZE		128
+
+#define CONFIG_SMC_GCTL_VAL	0x00000010
+#define CONFIG_SMC_B0CTL_VAL	0x01007011
+#define CONFIG_SMC_B0TIM_VAL	0x08170977
+#define CONFIG_SMC_B0ETIM_VAL	0x00092231
+
+#define CONFIG_SYS_MONITOR_LEN	(768 * 1024)
+#define CONFIG_SYS_MALLOC_LEN	(512 * 1024)
+
+/*
+ * Network Settings
+ */
+#define ADI_CMDS_NETWORK
+#define CONFIG_NETCONSOLE
+#define CONFIG_NET_MULTI
+#define CONFIG_HOSTNAME		"bf609-ezkit"
+#define CONFIG_DESIGNWARE_ETH
+#define CONFIG_DW_PORTS		1
+#define CONFIG_DW_AUTONEG
+#define CONFIG_DW_ALTDESCRIPTOR
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_MII
+#define CONFIG_MII
+
+/* i2c Settings */
+#define CONFIG_BFIN_TWI_I2C
+#define CONFIG_HARD_I2C
+
+/*
+ * Flash Settings
+ */
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_JFFS2
+#define CONFIG_SYS_FLASH_CFI_WIDTH     2
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_BASE          0xb0000000
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_MAX_FLASH_BANKS     1
+#define CONFIG_SYS_MAX_FLASH_SECT      131
+#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
+
+/*
+ * SPI Settings
+ */
+#define CONFIG_BFIN_SPI6XX
+#define CONFIG_ENV_SPI_MAX_HZ	25000000
+#define CONFIG_SF_DEFAULT_SPEED	25000000
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_ALL
+
+/*
+ * Env Storage Settings
+ */
+#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_OFFSET       0x10000
+#define CONFIG_ENV_SIZE         0x2000
+#define CONFIG_ENV_SECT_SIZE    0x10000
+#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
+#elif (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND)
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET       0x60000
+#define CONFIG_ENV_SIZE         0x20000
+#else
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_OFFSET       0x8000
+#define CONFIG_ENV_SIZE         0x8000
+#define CONFIG_ENV_SECT_SIZE    0x8000
+#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
+#endif
+
+#define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0xB0100000\0"
+
+/*
+ * SDH Settings
+ */
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC
+#define CONFIG_BFIN_SDH
+
+/*
+ * Misc Settings
+ */
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_UART_CONSOLE	0
+
+#define CONFIG_CMD_MEMORY
+
+#define CONFIG_SYS_MEMTEST_END (CONFIG_STACKBASE - 20*1024*1024 + 4)
+#define CONFIG_BFIN_SOFT_SWITCH
+
+#if 0
+#define CONFIG_UART_MEM 1024
+#undef CONFIG_UART_CONSOLE
+#undef CONFIG_JTAG_CONSOLE
+#undef CONFIG_UART_CONSOLE_IS_JTAG
+#endif
+
+/*
+ * Pull in common ADI header for remaining command/environment setup
+ */
+#include <configs/bfin_adi_common.h>
+#endif
diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h
index ccdec0d..ada03f0 100644
--- a/include/configs/bfin_adi_common.h
+++ b/include/configs/bfin_adi_common.h
@@ -10,7 +10,7 @@ 
  */
 #ifndef _CONFIG_CMD_DEFAULT_H
 # include <config_cmd_default.h>
-# if ADI_CMDS_NETWORK
+# ifdef ADI_CMDS_NETWORK
 #  define CONFIG_CMD_DHCP
 #  define CONFIG_BOOTP_SUBNETMASK
 #  define CONFIG_BOOTP_GATEWAY
@@ -58,7 +58,7 @@ 
 # endif
 # ifdef CONFIG_RTC_BFIN
 #  define CONFIG_CMD_DATE
-#  if ADI_CMDS_NETWORK
+#  ifdef ADI_CMDS_NETWORK
 #   define CONFIG_CMD_SNTP
 #  endif
 # endif
@@ -193,10 +193,10 @@ 
 		"nand erase 0 0x40000;" \
 		"nand write $(loadaddr) 0 0x40000"
 # else
-#  define UBOOT_ENV_UPDATE \
-		"protect off 0x20000000 +$(filesize);" \
-		"erase 0x20000000 +$(filesize);" \
-		"cp.b $(loadaddr) 0x20000000 $(filesize)"
+# define UBOOT_ENV_UPDATE \
+		"protect off " MK_STR(CONFIG_SYS_FLASH_BASE) " +$(filesize);" \
+		"erase " MK_STR(CONFIG_SYS_FLASH_BASE) " +$(filesize);" \
+		"cp.b $(loadaddr)"  MK_STR(CONFIG_SYS_FLASH_BASE) " $(filesize)"
 # endif
 # ifdef CONFIG_NETCONSOLE
 #  define NETCONSOLE_ENV \