Patchwork [U-Boot,V2,1/6] i.MX6: mx6qsabrelite: indent with tabs

login
register
mail settings
Submitter Eric Nelson
Date Feb. 19, 2013, 8:07 p.m.
Message ID <1361304425-24430-2-git-send-email-eric.nelson@boundarydevices.com>
Download mbox | patch
Permalink /patch/221866/
State Awaiting Upstream
Delegated to: Stefano Babic
Headers show

Comments

Eric Nelson - Feb. 19, 2013, 8:07 p.m.
This patch has no functional changes and simply replaces
leading spaces with tabs.

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
---
 board/freescale/mx6qsabrelite/mx6qsabrelite.c |  106 ++++++++++++-------------
 1 file changed, 53 insertions(+), 53 deletions(-)
Stefano Babic - Feb. 23, 2013, 9:57 a.m.
On 19/02/2013 21:07, Eric Nelson wrote:
> This patch has no functional changes and simply replaces
> leading spaces with tabs.
> 
> Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
> ---

Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic

Patch

diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
index f010d0c..c6c64c3 100644
--- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c
+++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
@@ -46,12 +46,12 @@ 
 DECLARE_GLOBAL_DATA_PTR;
 
 #define UART_PAD_CTRL  (PAD_CTL_PKE | PAD_CTL_PUE |	       \
-       PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |	       \
-       PAD_CTL_DSE_40ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
+	PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |	       \
+	PAD_CTL_DSE_40ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
 
 #define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE |	       \
-       PAD_CTL_PUS_47K_UP  | PAD_CTL_SPEED_LOW |	       \
-       PAD_CTL_DSE_80ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
+	PAD_CTL_PUS_47K_UP  | PAD_CTL_SPEED_LOW |	       \
+	PAD_CTL_DSE_80ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
 
 #define ENET_PAD_CTRL  (PAD_CTL_PKE | PAD_CTL_PUE |		\
 	PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED	  |		\
@@ -72,9 +72,9 @@  DECLARE_GLOBAL_DATA_PTR;
 
 int dram_init(void)
 {
-       gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
+	gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
 
-       return 0;
+	return 0;
 }
 
 iomux_v3_cfg_t const uart1_pads[] = {
@@ -83,8 +83,8 @@  iomux_v3_cfg_t const uart1_pads[] = {
 };
 
 iomux_v3_cfg_t const uart2_pads[] = {
-       MX6Q_PAD_EIM_D26__UART2_TXD | MUX_PAD_CTRL(UART_PAD_CTRL),
-       MX6Q_PAD_EIM_D27__UART2_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
+	MX6Q_PAD_EIM_D26__UART2_TXD | MUX_PAD_CTRL(UART_PAD_CTRL),
+	MX6Q_PAD_EIM_D27__UART2_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
 };
 
 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
@@ -132,23 +132,23 @@  struct i2c_pads_info i2c_pad_info2 = {
 };
 
 iomux_v3_cfg_t const usdhc3_pads[] = {
-       MX6Q_PAD_SD3_CLK__USDHC3_CLK   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-       MX6Q_PAD_SD3_CMD__USDHC3_CMD   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-       MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-       MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-       MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-       MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-       MX6Q_PAD_SD3_DAT5__GPIO_7_0    | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
+	MX6Q_PAD_SD3_CLK__USDHC3_CLK   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6Q_PAD_SD3_CMD__USDHC3_CMD   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6Q_PAD_SD3_DAT5__GPIO_7_0    | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
 };
 
 iomux_v3_cfg_t const usdhc4_pads[] = {
-       MX6Q_PAD_SD4_CLK__USDHC4_CLK   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-       MX6Q_PAD_SD4_CMD__USDHC4_CMD   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-       MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-       MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-       MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-       MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-       MX6Q_PAD_NANDF_D6__GPIO_2_6    | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
+	MX6Q_PAD_SD4_CLK__USDHC4_CLK   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6Q_PAD_SD4_CMD__USDHC4_CMD   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6Q_PAD_NANDF_D6__GPIO_2_6    | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
 };
 
 iomux_v3_cfg_t const enet_pads1[] = {
@@ -227,7 +227,7 @@  iomux_v3_cfg_t const usb_pads[] = {
 static void setup_iomux_uart(void)
 {
 	imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
-       imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads));
+	imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads));
 }
 
 #ifdef CONFIG_USB_EHCI_MX6
@@ -246,55 +246,55 @@  int board_ehci_hcd_init(int port)
 
 #ifdef CONFIG_FSL_ESDHC
 struct fsl_esdhc_cfg usdhc_cfg[2] = {
-       {USDHC3_BASE_ADDR},
-       {USDHC4_BASE_ADDR},
+	{USDHC3_BASE_ADDR},
+	{USDHC4_BASE_ADDR},
 };
 
 int board_mmc_getcd(struct mmc *mmc)
 {
-       struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
-       int ret;
+	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+	int ret;
 
-       if (cfg->esdhc_base == USDHC3_BASE_ADDR) {
+	if (cfg->esdhc_base == USDHC3_BASE_ADDR) {
 		gpio_direction_input(IMX_GPIO_NR(7, 0));
 		ret = !gpio_get_value(IMX_GPIO_NR(7, 0));
-       } else {
+	} else {
 		gpio_direction_input(IMX_GPIO_NR(2, 6));
 		ret = !gpio_get_value(IMX_GPIO_NR(2, 6));
-       }
+	}
 
-       return ret;
+	return ret;
 }
 
 int board_mmc_init(bd_t *bis)
 {
-       s32 status = 0;
-       u32 index = 0;
+	s32 status = 0;
+	u32 index = 0;
 
 	usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
 	usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
 
-       for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) {
-	       switch (index) {
-	       case 0:
-		       imx_iomux_v3_setup_multiple_pads(
-			       usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
-		       break;
-	       case 1:
-		       imx_iomux_v3_setup_multiple_pads(
-			       usdhc4_pads, ARRAY_SIZE(usdhc4_pads));
+	for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) {
+		switch (index) {
+		case 0:
+			imx_iomux_v3_setup_multiple_pads(
+				usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
+			break;
+		case 1:
+			imx_iomux_v3_setup_multiple_pads(
+				usdhc4_pads, ARRAY_SIZE(usdhc4_pads));
 		       break;
 	       default:
-		       printf("Warning: you configured more USDHC controllers"
+			printf("Warning: you configured more USDHC controllers"
 			       "(%d) then supported by the board (%d)\n",
 			       index + 1, CONFIG_SYS_FSL_USDHC_NUM);
-		       return status;
-	       }
+			return status;
+		}
 
-	       status |= fsl_esdhc_initialize(bis, &usdhc_cfg[index]);
-       }
+		status |= fsl_esdhc_initialize(bis, &usdhc_cfg[index]);
+	}
 
-       return status;
+	return status;
 }
 #endif
 
@@ -732,8 +732,8 @@  int overwrite_console(void)
 
 int board_init(void)
 {
-       /* address of boot parameters */
-       gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+	/* address of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
 
 #ifdef CONFIG_MXC_SPI
 	setup_spi();
@@ -746,14 +746,14 @@  int board_init(void)
 	setup_sata();
 #endif
 
-       return 0;
+	return 0;
 }
 
 int checkboard(void)
 {
-       puts("Board: MX6Q-Sabre Lite\n");
+	puts("Board: MX6Q-Sabre Lite\n");
 
-       return 0;
+	return 0;
 }
 
 struct button_key {