@@ -2685,6 +2685,23 @@ static int check_port_resume_type(struct usb_device *udev,
}
#ifdef CONFIG_USB_SUSPEND
+/*
+ * usb_disable_function_remotewakeup - disable usb3.0
+ * device's function remote wakeup
+ * @udev: target device
+ *
+ * Assume there's only one function on the USB 3.0
+ * device and disable remote wake for the first
+ * interface. FIXME if the interface association
+ * descriptor shows there's more than one function.
+ */
+static int usb_disable_function_remotewakeup(struct usb_device *udev)
+{
+ return usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+ USB_REQ_CLEAR_FEATURE, USB_RECIP_INTERFACE,
+ USB_INTRF_FUNC_SUSPEND, 0, NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+}
/*
* usb_port_suspend - suspend a usb device's upstream port
@@ -2797,12 +2814,19 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
dev_dbg(hub->intfdev, "can't suspend port %d, status %d\n",
port1, status);
/* paranoia: "should not happen" */
- if (udev->do_remote_wakeup)
- (void) usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
- USB_REQ_CLEAR_FEATURE, USB_RECIP_DEVICE,
- USB_DEVICE_REMOTE_WAKEUP, 0,
- NULL, 0,
- USB_CTRL_SET_TIMEOUT);
+ if (udev->do_remote_wakeup) {
+ if (!hub_is_superspeed(hub->hdev)) {
+ (void) usb_control_msg(udev,
+ usb_sndctrlpipe(udev, 0),
+ USB_REQ_CLEAR_FEATURE,
+ USB_RECIP_DEVICE,
+ USB_DEVICE_REMOTE_WAKEUP, 0,
+ NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+ } else
+ (void) usb_disable_function_remotewakeup(udev);
+
+ }
/* Try to enable USB2 hardware LPM again */
if (udev->usb2_hw_lpm_capable == 1)
@@ -2892,20 +2916,30 @@ static int finish_port_resume(struct usb_device *udev)
* udev->reset_resume
*/
} else if (udev->actconfig && !udev->reset_resume) {
- le16_to_cpus(&devstatus);
- if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) {
- status = usb_control_msg(udev,
- usb_sndctrlpipe(udev, 0),
- USB_REQ_CLEAR_FEATURE,
+ if (!hub_is_superspeed(udev->parent)) {
+ le16_to_cpus(&devstatus);
+ if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP))
+ status = usb_control_msg(udev,
+ usb_sndctrlpipe(udev, 0),
+ USB_REQ_CLEAR_FEATURE,
USB_RECIP_DEVICE,
- USB_DEVICE_REMOTE_WAKEUP, 0,
- NULL, 0,
- USB_CTRL_SET_TIMEOUT);
- if (status)
- dev_dbg(&udev->dev,
- "disable remote wakeup, status %d\n",
- status);
+ USB_DEVICE_REMOTE_WAKEUP, 0,
+ NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+ } else {
+ status = usb_get_status(udev, USB_RECIP_INTERFACE, 0,
+ &devstatus);
+ le16_to_cpus(&devstatus);
+ if (!status && devstatus & (USB_INTRF_STAT_FUNC_RW_CAP
+ | USB_INTRF_STAT_FUNC_RW))
+ status =
+ usb_disable_function_remotewakeup(udev);
}
+
+ if (status)
+ dev_dbg(&udev->dev,
+ "disable remote wakeup, status %d\n",
+ status);
status = 0;
}
return status;
@@ -152,6 +152,12 @@
#define USB_INTRF_FUNC_SUSPEND_LP (1 << (8 + 0))
#define USB_INTRF_FUNC_SUSPEND_RW (1 << (8 + 1))
+/*
+ * Interface status, Figure 9-5 USB 3.0 spec
+ */
+#define USB_INTRF_STAT_FUNC_RW_CAP 1
+#define USB_INTRF_STAT_FUNC_RW 2
+
#define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */
/* Bit array elements as returned by the USB_REQ_GET_STATUS request. */
This is a note to let you know that I have just added a patch titled usb: Using correct way to clear usb3.0 device's remote to the linux-3.5.y-queue branch of the 3.5.y.z extended stable tree which can be found at: http://kernel.ubuntu.com/git?p=ubuntu/linux.git;a=shortlog;h=refs/heads/linux-3.5.y-queue If you, or anyone else, feels it should not be added to this tree, please reply to this email. For more information about the 3.5.y.z tree, see https://wiki.ubuntu.com/Kernel/Dev/ExtendedStable Thanks. -Herton ------ From 03fc2b61fe02cb601e9caccccbccbef63bd0fdab Mon Sep 17 00:00:00 2001 From: Lan Tianyu <tianyu.lan@intel.com> Date: Thu, 24 Jan 2013 10:31:28 +0800 Subject: [PATCH] usb: Using correct way to clear usb3.0 device's remote wakeup feature. commit 54a3ac0c9e5b7213daa358ce74d154352657353a upstream. Usb3.0 device defines function remote wakeup which is only for interface recipient rather than device recipient. This is different with usb2.0 device's remote wakeup feature which is defined for device recipient. According usb3.0 spec 9.4.5, the function remote wakeup can be modified by the SetFeature() requests using the FUNCTION_SUSPEND feature selector. This patch is to use correct way to disable usb3.0 device's function remote wakeup after suspend error and resuming. This should be backported to kernels as old as 3.4, that contain the commit 623bef9e03a60adc623b09673297ca7a1cdfb367 "USB/xhci: Enable remote wakeup for USB3 devices." Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> [ herton: include/uapi/linux/usb/ch9.h -> include/linux/usb/ch9.h, adjust context ] Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> --- drivers/usb/core/hub.c | 70 +++++++++++++++++++++++++++++++++++------------ include/linux/usb/ch9.h | 6 ++++ 2 files changed, 58 insertions(+), 18 deletions(-) -- 1.7.9.5