Patchwork [U-Boot,5/5] am335x evm: Add am335x_evm_spiboot target

login
register
mail settings
Submitter Tom Rini
Date Feb. 8, 2013, 9:20 p.m.
Message ID <1360358415-10462-6-git-send-email-trini@ti.com>
Download mbox | patch
Permalink /patch/219313/
State Accepted
Delegated to: Tom Rini
Headers show

Comments

Tom Rini - Feb. 8, 2013, 9:20 p.m.
This target will move the environment into SPI flash and documents
the expected layout.  We correct the SPL define for where U-Boot is
and remove an unused define.

Signed-off-by: Tom Rini <trini@ti.com>
---
 boards.cfg                   |    1 +
 include/configs/am335x_evm.h |   25 +++++++++++++++++++++++--
 2 files changed, 24 insertions(+), 2 deletions(-)

Patch

diff --git a/boards.cfg b/boards.cfg
index 98f7a14..73195eb 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -231,6 +231,7 @@  integratorap_cm946es         arm         arm946es    integrator          armltd
 integratorcp_cm946es         arm         arm946es    integrator          armltd         -               integratorcp:CM946ES
 ca9x4_ct_vxp                 arm         armv7       vexpress            armltd
 am335x_evm                   arm         armv7       am335x              ti             am33xx      am335x_evm:SERIAL1,CONS_INDEX=1
+am335x_evm_spiboot           arm         armv7       am335x              ti             am33xx      am335x_evm:SERIAL1,CONS_INDEX=1,SPI_BOOT
 am335x_evm_uart1             arm         armv7       am335x              ti             am33xx      am335x_evm:SERIAL2,CONS_INDEX=2
 am335x_evm_uart2             arm         armv7       am335x              ti             am33xx      am335x_evm:SERIAL3,CONS_INDEX=3
 am335x_evm_uart3             arm         armv7       am335x              ti             am33xx      am335x_evm:SERIAL4,CONS_INDEX=4
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index 61607a5..1316a44 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -279,8 +279,7 @@ 
 #define CONFIG_SPL_SPI_LOAD
 #define CONFIG_SPL_SPI_BUS		0
 #define CONFIG_SPL_SPI_CS		0
-#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x20000
-#define CONFIG_SYS_SPI_U_BOOT_SIZE	0x40000
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x80000
 #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
 
 #define CONFIG_SPL_BOARD_INIT
@@ -356,6 +355,26 @@ 
 #define CONFIG_USB_ETH_RNDIS
 #endif /* CONFIG_MUSB_GADGET */
 
+/*
+ * Default to using SPI for environment, etc.  We have multiple copies
+ * of SPL as the ROM will check these locations.
+ * 0x0 - 0x20000 : First copy of SPL
+ * 0x20000 - 0x40000 : Second copy of SPL
+ * 0x40000 - 0x60000 : Third copy of SPL
+ * 0x60000 - 0x80000 : Fourth copy of SPL
+ * 0x80000 - 0xDF000 : U-Boot
+ * 0xDF000 - 0xE0000 : U-Boot Environment
+ * 0xE0000 - 0x442000 : Linux Kernel
+ * 0x442000 - 0x800000 : Userland
+ */
+#if defined(CONFIG_SPI_BOOT)
+# undef CONFIG_ENV_IS_NOWHERE
+# define CONFIG_ENV_IS_IN_SPI_FLASH
+# define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
+# define CONFIG_ENV_OFFSET		(892 << 10) /* 892 KiB in */
+# define CONFIG_ENV_SECT_SIZE		(4 << 10) /* 4 KB sectors */
+#endif /* SPI support */
+
 /* Unsupported features */
 #undef CONFIG_USE_IRQ
 
@@ -388,10 +407,12 @@ 
 							/* CS0 */
 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of NAND
 							   devices */
+#if !defined(CONFIG_SPI_BOOT)
 #undef CONFIG_ENV_IS_NOWHERE
 #define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_OFFSET		0x260000 /* environment starts here */
 #define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
 #endif
+#endif
 
 #endif	/* ! __CONFIG_AM335X_EVM_H */