| Message ID | 20130207191944.GB15541@bill-the-cat |
|---|---|
| State | Accepted |
| Delegated to: | Albert ARIBAUD |
| Headers | show |
Hi Tom, On Thu, 7 Feb 2013 14:19:44 -0500, Tom Rini <trini@ti.com> wrote: > Hello, > > The following changes since commit 5bedf884a8508f1b2f5b8f74e67d987a81ff05ed: > > ARM: highbank: use wfi macro instead of inline asm (2013-02-03 14:44:02 +0100) > > are available in the git repository at: > > git://git.denx.de/u-boot-ti.git master > > for you to fetch changes up to 8978f860a64eecfa088c1088bc0c2002ec316362: > > am33xx: Drop gpio0_7_pin_mux from phytec pcm051 (2013-02-07 10:36:26 -0500) > > ---------------------------------------------------------------- > Javier Martinez Canillas (4): > OMAP3: use a single board file for IGEP devices > OMAP3: igep00x0: add boot status GPIO LED > omap4: allow the use of a plain text env file instead boot scripts > OMAP3: igep00x0: fix a build warning on IGEP boards > > Jeff Lance (1): > Add DDR3 support for AM335x-EVM (Version 1.5A) > > Lars Poeschel (3): > am33xx: add a pulldown macro to pinmux config > pcm051: Add support for Phytec phyCORE-AM335x > am335x: display msg when reading MAC from efuse > > Tom Rini (1): > am33xx: Drop gpio0_7_pin_mux from phytec pcm051 > > hvaibhav@ti.com (1): > AM335X: Set fdt_high for AM335X devices to enable booting with Device Tree > > MAINTAINERS | 3 + > arch/arm/include/asm/arch-am33xx/ddr_defs.h | 34 +++ > arch/arm/include/asm/arch-am33xx/mux.h | 3 +- > board/isee/igep0020/igep0020.h | 151 ---------- > board/isee/igep0030/Makefile | 43 --- > board/isee/igep0030/igep0030.c | 117 -------- > board/isee/{igep0020 => igep00x0}/Makefile | 2 +- > .../{igep0020/igep0020.c => igep00x0/igep00x0.c} | 51 +++- > .../{igep0030/igep0030.h => igep00x0/igep00x0.h} | 35 ++- > board/phytec/pcm051/Makefile | 46 +++ > board/phytec/pcm051/board.c | 266 +++++++++++++++++ > board/phytec/pcm051/board.h | 33 +++ > board/phytec/pcm051/mux.c | 128 +++++++++ > board/ti/am335x/board.c | 43 ++- > boards.cfg | 9 +- > include/configs/am335x_evm.h | 1 + > include/configs/igep00x0.h | 5 + > include/configs/omap4_common.h | 17 +- > include/configs/pcm051.h | 301 ++++++++++++++++++++ > 19 files changed, 946 insertions(+), 342 deletions(-) > delete mode 100644 board/isee/igep0020/igep0020.h > delete mode 100644 board/isee/igep0030/Makefile > delete mode 100644 board/isee/igep0030/igep0030.c > rename board/isee/{igep0020 => igep00x0}/Makefile (98%) > rename board/isee/{igep0020/igep0020.c => igep00x0/igep00x0.c} (86%) > rename board/isee/{igep0030/igep0030.h => igep00x0/igep00x0.h} (93%) > create mode 100644 board/phytec/pcm051/Makefile > create mode 100644 board/phytec/pcm051/board.c > create mode 100644 board/phytec/pcm051/board.h > create mode 100644 board/phytec/pcm051/mux.c > create mode 100644 include/configs/pcm051.h > > The only change from last time, aside from what this is based on top of > is that I've turned Lars' Cc into an Ack, as he has acked the change. > Applied to u-boot-arm/master, thanks! Amicalement,
Hello, The following changes since commit 5bedf884a8508f1b2f5b8f74e67d987a81ff05ed: ARM: highbank: use wfi macro instead of inline asm (2013-02-03 14:44:02 +0100) are available in the git repository at: git://git.denx.de/u-boot-ti.git master for you to fetch changes up to 8978f860a64eecfa088c1088bc0c2002ec316362: am33xx: Drop gpio0_7_pin_mux from phytec pcm051 (2013-02-07 10:36:26 -0500) ---------------------------------------------------------------- Javier Martinez Canillas (4): OMAP3: use a single board file for IGEP devices OMAP3: igep00x0: add boot status GPIO LED omap4: allow the use of a plain text env file instead boot scripts OMAP3: igep00x0: fix a build warning on IGEP boards Jeff Lance (1): Add DDR3 support for AM335x-EVM (Version 1.5A) Lars Poeschel (3): am33xx: add a pulldown macro to pinmux config pcm051: Add support for Phytec phyCORE-AM335x am335x: display msg when reading MAC from efuse Tom Rini (1): am33xx: Drop gpio0_7_pin_mux from phytec pcm051 hvaibhav@ti.com (1): AM335X: Set fdt_high for AM335X devices to enable booting with Device Tree MAINTAINERS | 3 + arch/arm/include/asm/arch-am33xx/ddr_defs.h | 34 +++ arch/arm/include/asm/arch-am33xx/mux.h | 3 +- board/isee/igep0020/igep0020.h | 151 ---------- board/isee/igep0030/Makefile | 43 --- board/isee/igep0030/igep0030.c | 117 -------- board/isee/{igep0020 => igep00x0}/Makefile | 2 +- .../{igep0020/igep0020.c => igep00x0/igep00x0.c} | 51 +++- .../{igep0030/igep0030.h => igep00x0/igep00x0.h} | 35 ++- board/phytec/pcm051/Makefile | 46 +++ board/phytec/pcm051/board.c | 266 +++++++++++++++++ board/phytec/pcm051/board.h | 33 +++ board/phytec/pcm051/mux.c | 128 +++++++++ board/ti/am335x/board.c | 43 ++- boards.cfg | 9 +- include/configs/am335x_evm.h | 1 + include/configs/igep00x0.h | 5 + include/configs/omap4_common.h | 17 +- include/configs/pcm051.h | 301 ++++++++++++++++++++ 19 files changed, 946 insertions(+), 342 deletions(-) delete mode 100644 board/isee/igep0020/igep0020.h delete mode 100644 board/isee/igep0030/Makefile delete mode 100644 board/isee/igep0030/igep0030.c rename board/isee/{igep0020 => igep00x0}/Makefile (98%) rename board/isee/{igep0020/igep0020.c => igep00x0/igep00x0.c} (86%) rename board/isee/{igep0030/igep0030.h => igep00x0/igep00x0.h} (93%) create mode 100644 board/phytec/pcm051/Makefile create mode 100644 board/phytec/pcm051/board.c create mode 100644 board/phytec/pcm051/board.h create mode 100644 board/phytec/pcm051/mux.c create mode 100644 include/configs/pcm051.h The only change from last time, aside from what this is based on top of is that I've turned Lars' Cc into an Ack, as he has acked the change.