diff mbox

[v2] rtc: max8997: Add driver for max8997 rtc.

Message ID 1360234887-12360-1-git-send-email-jonghwa3.lee@samsung.com
State Accepted
Headers show

Commit Message

Jonghwa Lee Feb. 7, 2013, 11:01 a.m. UTC
This patch adds rtc driver for Maxim 8997 multifunction chip.
Max8997 has rtc module in it. and it can be used for timekeeping
clock and system alarm. It provide various operational mode those are
BCD/binary, 24/12hour, am/pm. Driver sets binary/24/ for default.
Maxim 8997 also supports SMPL(Sudden Momentary Power Loss), WTSR
(Watchdog Timeout and Software Reset).

Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
---
v2
 - Add module parameter to enable/disable WTSR, SMPL fuction.
 - Add unregister_rtc_device() for accidental exit in probing.

 drivers/rtc/Kconfig       |   10 +
 drivers/rtc/Makefile      |    1 +
 drivers/rtc/rtc-max8997.c |  553 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 564 insertions(+)
 create mode 100644 drivers/rtc/rtc-max8997.c

Comments

Andrew Morton Feb. 7, 2013, 9:44 p.m. UTC | #1
On Thu, 07 Feb 2013 20:01:27 +0900
Jonghwa Lee <jonghwa3.lee@samsung.com> wrote:

> This patch adds rtc driver for Maxim 8997 multifunction chip.
> Max8997 has rtc module in it. and it can be used for timekeeping
> clock and system alarm. It provide various operational mode those are
> BCD/binary, 24/12hour, am/pm. Driver sets binary/24/ for default.
> Maxim 8997 also supports SMPL(Sudden Momentary Power Loss), WTSR
> (Watchdog Timeout and Software Reset).
> 
> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
> ---
> v2
>  - Add module parameter to enable/disable WTSR, SMPL fuction.
>  - Add unregister_rtc_device() for accidental exit in probing.
>
> ...
>
> +/* Module parameter for WTSR function control */
> +static int wtsr_en = 1;
> +module_param(wtsr_en, int, 0444);
> +MODULE_PARM_DESC(wtsr_en, "Wachdog Timeout & Sofware Reset (default=on)");
> +/* Module parameter for SMPL function control */
> +static int smpl_en = 1;
> +module_param(smpl_en, int, 0444);
> +MODULE_PARM_DESC(smpl_en, "Sudden Momentary Power Loss (default=on)");

"default=on" is interesting.  For what reasons would a user ever want
to set this "off"?  Can we just remove the options and leave these
things enabled all the time for everyone?
Jonghwa Lee Feb. 8, 2013, 2:19 a.m. UTC | #2
On 2013년 02월 08일 06:44, Andrew Morton wrote:
> On Thu, 07 Feb 2013 20:01:27 +0900
> Jonghwa Lee <jonghwa3.lee@samsung.com> wrote:
> 
>> This patch adds rtc driver for Maxim 8997 multifunction chip.
>> Max8997 has rtc module in it. and it can be used for timekeeping
>> clock and system alarm. It provide various operational mode those are
>> BCD/binary, 24/12hour, am/pm. Driver sets binary/24/ for default.
>> Maxim 8997 also supports SMPL(Sudden Momentary Power Loss), WTSR
>> (Watchdog Timeout and Software Reset).
>>
>> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
>> ---
>> v2
>>  - Add module parameter to enable/disable WTSR, SMPL fuction.
>>  - Add unregister_rtc_device() for accidental exit in probing.
>>
>> ...
>>
>> +/* Module parameter for WTSR function control */
>> +static int wtsr_en = 1;
>> +module_param(wtsr_en, int, 0444);
>> +MODULE_PARM_DESC(wtsr_en, "Wachdog Timeout & Sofware Reset (default=on)");
>> +/* Module parameter for SMPL function control */
>> +static int smpl_en = 1;
>> +module_param(smpl_en, int, 0444);
>> +MODULE_PARM_DESC(smpl_en, "Sudden Momentary Power Loss (default=on)");
> 
> "default=on" is interesting.  For what reasons would a user ever want
> to set this "off"?  Can we just remove the options and leave these
> things enabled all the time for everyone?
>

System with WTSR will be postponed to reset more than 58.6ms(250 ~ 1000ms) even if AP sends
POWERHOLD signal low. (By default(without WTSR) it keeps PMIC on 58.6ms , then re-check the
POWERHOLD signal to determine whether it needs PMIC off)
And with SMPL option enabled, system will be automatically re-boot when power has been recovered
before SMPL's timer is expired.

Those all functions are just optional not significant. And someone may not want to them, so
I think the better idea is leave it selectable. If you don't thinks so, I remove options and
keep it enabled for all.

Thanks,
Jonghwa.

>
diff mbox

Patch

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index fc382af..43619c3 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -233,6 +233,16 @@  config RTC_DRV_MAX8998
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-max8998.
 
+config RTC_DRV_MAX8997
+	tristate "Maxim MAX8997"
+	depends on MFD_MAX8997
+	help
+	  If you say yes here you will get support for the
+	  RTC of Maxim MAX8997 PMIC.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-max8997.
+
 config RTC_DRV_MAX77686
 	tristate "Maxim MAX77686"
 	depends on MFD_MAX77686
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 97e7967..6b0513b 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -69,6 +69,7 @@  obj-$(CONFIG_RTC_DRV_MAX6900)	+= rtc-max6900.o
 obj-$(CONFIG_RTC_DRV_MAX8907)	+= rtc-max8907.o
 obj-$(CONFIG_RTC_DRV_MAX8925)	+= rtc-max8925.o
 obj-$(CONFIG_RTC_DRV_MAX8998)	+= rtc-max8998.o
+obj-$(CONFIG_RTC_DRV_MAX8997)	+= rtc-max8997.o
 obj-$(CONFIG_RTC_DRV_MAX6902)	+= rtc-max6902.o
 obj-$(CONFIG_RTC_DRV_MAX77686)	+= rtc-max77686.o
 obj-$(CONFIG_RTC_DRV_MC13XXX)	+= rtc-mc13xxx.o
diff --git a/drivers/rtc/rtc-max8997.c b/drivers/rtc/rtc-max8997.c
new file mode 100644
index 0000000..6e12f17
--- /dev/null
+++ b/drivers/rtc/rtc-max8997.c
@@ -0,0 +1,553 @@ 
+/*
+ * RTC driver for Maxim MAX8997
+ *
+ * Copyright (C) 2013 Samsung Electronics Co.Ltd
+ *
+ *  based on rtc-max8998.c
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/rtc.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/max8997-private.h>
+#include <linux/irqdomain.h>
+
+/* Module parameter for WTSR function control */
+static int wtsr_en = 1;
+module_param(wtsr_en, int, 0444);
+MODULE_PARM_DESC(wtsr_en, "Wachdog Timeout & Sofware Reset (default=on)");
+/* Module parameter for SMPL function control */
+static int smpl_en = 1;
+module_param(smpl_en, int, 0444);
+MODULE_PARM_DESC(smpl_en, "Sudden Momentary Power Loss (default=on)");
+
+/* RTC Control Register */
+#define BCD_EN_SHIFT			0
+#define BCD_EN_MASK			(1 << BCD_EN_SHIFT)
+#define MODEL24_SHIFT			1
+#define MODEL24_MASK			(1 << MODEL24_SHIFT)
+/* RTC Update Register1 */
+#define RTC_UDR_SHIFT			0
+#define RTC_UDR_MASK			(1 << RTC_UDR_SHIFT)
+/* WTSR and SMPL Register */
+#define WTSRT_SHIFT			0
+#define SMPLT_SHIFT			2
+#define WTSR_EN_SHIFT			6
+#define SMPL_EN_SHIFT			7
+#define WTSRT_MASK			(3 << WTSRT_SHIFT)
+#define SMPLT_MASK			(3 << SMPLT_SHIFT)
+#define WTSR_EN_MASK			(1 << WTSR_EN_SHIFT)
+#define SMPL_EN_MASK			(1 << SMPL_EN_SHIFT)
+/* RTC Hour register */
+#define HOUR_PM_SHIFT			6
+#define HOUR_PM_MASK			(1 << HOUR_PM_SHIFT)
+/* RTC Alarm Enable */
+#define ALARM_ENABLE_SHIFT		7
+#define ALARM_ENABLE_MASK		(1 << ALARM_ENABLE_SHIFT)
+
+enum {
+	RTC_SEC = 0,
+	RTC_MIN,
+	RTC_HOUR,
+	RTC_WEEKDAY,
+	RTC_MONTH,
+	RTC_YEAR,
+	RTC_DATE,
+	RTC_NR_TIME
+};
+
+struct max8997_rtc_info {
+	struct device		*dev;
+	struct max8997_dev	*max8997;
+	struct i2c_client	*rtc;
+	struct rtc_device	*rtc_dev;
+	struct mutex		lock;
+	int virq;
+	int rtc_24hr_mode;
+};
+
+static void max8997_rtc_data_to_tm(u8 *data, struct rtc_time *tm,
+				   int rtc_24hr_mode)
+{
+	tm->tm_sec = data[RTC_SEC] & 0x7f;
+	tm->tm_min = data[RTC_MIN] & 0x7f;
+	if (rtc_24hr_mode)
+		tm->tm_hour = data[RTC_HOUR] & 0x1f;
+	else {
+		tm->tm_hour = data[RTC_HOUR] & 0x0f;
+		if (data[RTC_HOUR] & HOUR_PM_MASK)
+			tm->tm_hour += 12;
+	}
+
+	tm->tm_wday = fls(data[RTC_WEEKDAY] & 0x7f) - 1;
+	tm->tm_mday = data[RTC_DATE] & 0x1f;
+	tm->tm_mon = (data[RTC_MONTH] & 0x0f) - 1;
+	tm->tm_year = (data[RTC_YEAR] & 0x7f) + 100;
+	tm->tm_yday = 0;
+	tm->tm_isdst = 0;
+}
+
+static int max8997_rtc_tm_to_data(struct rtc_time *tm, u8 *data)
+{
+	data[RTC_SEC] = tm->tm_sec;
+	data[RTC_MIN] = tm->tm_min;
+	data[RTC_HOUR] = tm->tm_hour;
+	data[RTC_WEEKDAY] = 1 << tm->tm_wday;
+	data[RTC_DATE] = tm->tm_mday;
+	data[RTC_MONTH] = tm->tm_mon + 1;
+	data[RTC_YEAR] = tm->tm_year > 100 ? (tm->tm_year - 100) : 0 ;
+
+	if (tm->tm_year < 100) {
+		pr_warn("%s: MAX8997 RTC cannot handle the year %d."
+			"Assume it's 2000.\n", __func__, 1900 + tm->tm_year);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static inline int max8997_rtc_set_update_reg(struct max8997_rtc_info *info)
+{
+	int ret;
+
+	ret = max8997_write_reg(info->rtc, MAX8997_RTC_UPDATE1,
+						RTC_UDR_MASK);
+	if (ret < 0)
+		dev_err(info->dev, "%s: fail to write update reg(%d)\n",
+				__func__, ret);
+	else {
+		/* Minimum 16ms delay required before RTC update.
+		 * Otherwise, we may read and update based on out-of-date
+		 * value */
+		msleep(20);
+	}
+
+	return ret;
+}
+
+static int max8997_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct max8997_rtc_info *info = dev_get_drvdata(dev);
+	u8 data[RTC_NR_TIME];
+	int ret;
+
+	mutex_lock(&info->lock);
+	ret = max8997_bulk_read(info->rtc, MAX8997_RTC_SEC, RTC_NR_TIME, data);
+	mutex_unlock(&info->lock);
+
+	if (ret < 0) {
+		dev_err(info->dev, "%s: fail to read time reg(%d)\n", __func__,
+				ret);
+		return ret;
+	}
+
+	max8997_rtc_data_to_tm(data, tm, info->rtc_24hr_mode);
+
+	return rtc_valid_tm(tm);
+}
+
+static int max8997_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct max8997_rtc_info *info = dev_get_drvdata(dev);
+	u8 data[RTC_NR_TIME];
+	int ret;
+
+	ret = max8997_rtc_tm_to_data(tm, data);
+	if (ret < 0)
+		return ret;
+
+	mutex_lock(&info->lock);
+
+	ret = max8997_bulk_write(info->rtc, MAX8997_RTC_SEC, RTC_NR_TIME, data);
+	if (ret < 0) {
+		dev_err(info->dev, "%s: fail to write time reg(%d)\n", __func__,
+				ret);
+		goto out;
+	}
+
+	ret = max8997_rtc_set_update_reg(info);
+out:
+	mutex_unlock(&info->lock);
+	return ret;
+}
+
+static int max8997_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct max8997_rtc_info *info = dev_get_drvdata(dev);
+	u8 data[RTC_NR_TIME];
+	u8 val;
+	int i, ret;
+
+	mutex_lock(&info->lock);
+
+	ret = max8997_bulk_read(info->rtc, MAX8997_RTC_ALARM1_SEC, RTC_NR_TIME,
+			data);
+	if (ret < 0) {
+		dev_err(info->dev, "%s:%d fail to read alarm reg(%d)\n",
+				__func__, __LINE__, ret);
+		goto out;
+	}
+
+	max8997_rtc_data_to_tm(data, &alrm->time, info->rtc_24hr_mode);
+
+	alrm->enabled = 0;
+	for (i = 0; i < RTC_NR_TIME; i++) {
+		if (data[i] & ALARM_ENABLE_MASK) {
+			alrm->enabled = 1;
+			break;
+		}
+	}
+
+	alrm->pending = 0;
+	ret = max8997_read_reg(info->max8997->i2c, MAX8997_REG_STATUS1, &val);
+	if (ret < 0) {
+		dev_err(info->dev, "%s:%d fail to read status1 reg(%d)\n",
+				__func__, __LINE__, ret);
+		goto out;
+	}
+
+	if (val & (1 << 4)) /* RTCA1 */
+		alrm->pending = 1;
+
+out:
+	mutex_unlock(&info->lock);
+	return 0;
+}
+
+static int max8997_rtc_stop_alarm(struct max8997_rtc_info *info)
+{
+	u8 data[RTC_NR_TIME];
+	int ret, i;
+
+	if (!mutex_is_locked(&info->lock))
+		dev_warn(info->dev, "%s: should have mutex locked\n", __func__);
+
+	ret = max8997_bulk_read(info->rtc, MAX8997_RTC_ALARM1_SEC, RTC_NR_TIME,
+				data);
+	if (ret < 0) {
+		dev_err(info->dev, "%s: fail to read alarm reg(%d)\n",
+				__func__, ret);
+		goto out;
+	}
+
+	for (i = 0; i < RTC_NR_TIME; i++)
+		data[i] &= ~ALARM_ENABLE_MASK;
+
+	ret = max8997_bulk_write(info->rtc, MAX8997_RTC_ALARM1_SEC, RTC_NR_TIME,
+				 data);
+	if (ret < 0) {
+		dev_err(info->dev, "%s: fail to write alarm reg(%d)\n",
+				__func__, ret);
+		goto out;
+	}
+
+	ret = max8997_rtc_set_update_reg(info);
+out:
+	return ret;
+}
+
+static int max8997_rtc_start_alarm(struct max8997_rtc_info *info)
+{
+	u8 data[RTC_NR_TIME];
+	int ret;
+
+	if (!mutex_is_locked(&info->lock))
+		dev_warn(info->dev, "%s: should have mutex locked\n", __func__);
+
+	ret = max8997_bulk_read(info->rtc, MAX8997_RTC_ALARM1_SEC, RTC_NR_TIME,
+				data);
+	if (ret < 0) {
+		dev_err(info->dev, "%s: fail to read alarm reg(%d)\n",
+				__func__, ret);
+		goto out;
+	}
+
+	data[RTC_SEC] |= (1 << ALARM_ENABLE_SHIFT);
+	data[RTC_MIN] |= (1 << ALARM_ENABLE_SHIFT);
+	data[RTC_HOUR] |= (1 << ALARM_ENABLE_SHIFT);
+	data[RTC_WEEKDAY] &= ~ALARM_ENABLE_MASK;
+	if (data[RTC_MONTH] & 0xf)
+		data[RTC_MONTH] |= (1 << ALARM_ENABLE_SHIFT);
+	if (data[RTC_YEAR] & 0x7f)
+		data[RTC_YEAR] |= (1 << ALARM_ENABLE_SHIFT);
+	if (data[RTC_DATE] & 0x1f)
+		data[RTC_DATE] |= (1 << ALARM_ENABLE_SHIFT);
+
+	ret = max8997_bulk_write(info->rtc, MAX8997_RTC_ALARM1_SEC, RTC_NR_TIME,
+				 data);
+	if (ret < 0) {
+		dev_err(info->dev, "%s: fail to write alarm reg(%d)\n",
+				__func__, ret);
+		goto out;
+	}
+
+	ret = max8997_rtc_set_update_reg(info);
+out:
+	return ret;
+}
+static int max8997_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct max8997_rtc_info *info = dev_get_drvdata(dev);
+	u8 data[RTC_NR_TIME];
+	int ret;
+
+	ret = max8997_rtc_tm_to_data(&alrm->time, data);
+	if (ret < 0)
+		return ret;
+
+	dev_info(info->dev, "%s: %d-%02d-%02d %02d:%02d:%02d\n", __func__,
+			data[RTC_YEAR] + 2000, data[RTC_MONTH], data[RTC_DATE],
+			data[RTC_HOUR], data[RTC_MIN], data[RTC_SEC]);
+
+	mutex_lock(&info->lock);
+
+	ret = max8997_rtc_stop_alarm(info);
+	if (ret < 0)
+		goto out;
+
+	ret = max8997_bulk_write(info->rtc, MAX8997_RTC_ALARM1_SEC, RTC_NR_TIME,
+				data);
+	if (ret < 0) {
+		dev_err(info->dev, "%s: fail to write alarm reg(%d)\n",
+				__func__, ret);
+		goto out;
+	}
+
+	ret = max8997_rtc_set_update_reg(info);
+	if (ret < 0)
+		goto out;
+
+	if (alrm->enabled)
+		ret = max8997_rtc_start_alarm(info);
+out:
+	mutex_unlock(&info->lock);
+	return ret;
+}
+
+static int max8997_rtc_alarm_irq_enable(struct device *dev,
+					unsigned int enabled)
+{
+	struct max8997_rtc_info *info = dev_get_drvdata(dev);
+	int ret;
+
+	mutex_lock(&info->lock);
+	if (enabled)
+		ret = max8997_rtc_start_alarm(info);
+	else
+		ret = max8997_rtc_stop_alarm(info);
+	mutex_unlock(&info->lock);
+
+	return ret;
+}
+
+static irqreturn_t max8997_rtc_alarm_irq(int irq, void *data)
+{
+	struct max8997_rtc_info *info = data;
+
+	dev_info(info->dev, "%s:irq(%d)\n", __func__, irq);
+
+	rtc_update_irq(info->rtc_dev, 1, RTC_IRQF | RTC_AF);
+
+	return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops max8997_rtc_ops = {
+	.read_time = max8997_rtc_read_time,
+	.set_time = max8997_rtc_set_time,
+	.read_alarm = max8997_rtc_read_alarm,
+	.set_alarm = max8997_rtc_set_alarm,
+	.alarm_irq_enable = max8997_rtc_alarm_irq_enable,
+};
+
+static void max8997_rtc_enable_wtsr(struct max8997_rtc_info *info, bool enable)
+{
+	int ret;
+	u8 val, mask;
+
+	if (!wtsr_en)
+		return;
+
+	if (enable)
+		val = (1 << WTSR_EN_SHIFT) | (3 << WTSRT_SHIFT);
+	else
+		val = 0;
+
+	mask = WTSR_EN_MASK | WTSRT_MASK;
+
+	dev_info(info->dev, "%s: %s WTSR\n", __func__,
+			enable ? "enable" : "disable");
+
+	ret = max8997_update_reg(info->rtc, MAX8997_RTC_WTSR_SMPL, val, mask);
+	if (ret < 0) {
+		dev_err(info->dev, "%s: fail to update WTSR reg(%d)\n",
+				__func__, ret);
+		return;
+	}
+
+	max8997_rtc_set_update_reg(info);
+}
+
+static void max8997_rtc_enable_smpl(struct max8997_rtc_info *info, bool enable)
+{
+	int ret;
+	u8 val, mask;
+
+	if (!smpl_en)
+		return;
+
+	if (enable)
+		val = (1 << SMPL_EN_SHIFT) | (0 << SMPLT_SHIFT);
+	else
+		val = 0;
+
+	mask = SMPL_EN_MASK | SMPLT_MASK;
+
+	dev_info(info->dev, "%s: %s SMPL\n", __func__,
+			enable ? "enable" : "disable");
+
+	ret = max8997_update_reg(info->rtc, MAX8997_RTC_WTSR_SMPL, val, mask);
+	if (ret < 0) {
+		dev_err(info->dev, "%s: fail to update SMPL reg(%d)\n",
+				__func__, ret);
+		return;
+	}
+
+	max8997_rtc_set_update_reg(info);
+
+	val = 0;
+	max8997_read_reg(info->rtc, MAX8997_RTC_WTSR_SMPL, &val);
+	pr_info("%s: WTSR_SMPL(0x%02x)\n", __func__, val);
+}
+
+static int max8997_rtc_init_reg(struct max8997_rtc_info *info)
+{
+	u8 data[2];
+	int ret;
+
+	/* Set RTC control register : Binary mode, 24hour mdoe */
+	data[0] = (1 << BCD_EN_SHIFT) | (1 << MODEL24_SHIFT);
+	data[1] = (0 << BCD_EN_SHIFT) | (1 << MODEL24_SHIFT);
+
+	info->rtc_24hr_mode = 1;
+
+	ret = max8997_bulk_write(info->rtc, MAX8997_RTC_CTRLMASK, 2, data);
+	if (ret < 0) {
+		dev_err(info->dev, "%s: fail to write controlm reg(%d)\n",
+				__func__, ret);
+		return ret;
+	}
+
+	ret = max8997_rtc_set_update_reg(info);
+	return ret;
+}
+
+static int max8997_rtc_probe(struct platform_device *pdev)
+{
+	struct max8997_dev *max8997 = dev_get_drvdata(pdev->dev.parent);
+	struct max8997_rtc_info *info;
+	int ret, virq;
+
+	info = devm_kzalloc(&pdev->dev, sizeof(struct max8997_rtc_info),
+			GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	mutex_init(&info->lock);
+	info->dev = &pdev->dev;
+	info->max8997 = max8997;
+	info->rtc = max8997->rtc;
+
+	platform_set_drvdata(pdev, info);
+
+	ret = max8997_rtc_init_reg(info);
+
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to initialize RTC reg:%d\n", ret);
+		return ret;
+	}
+
+	max8997_rtc_enable_wtsr(info, true);
+	max8997_rtc_enable_smpl(info, true);
+
+	device_init_wakeup(&pdev->dev, 1);
+
+	info->rtc_dev = rtc_device_register("max8997-rtc", &pdev->dev,
+			&max8997_rtc_ops, THIS_MODULE);
+
+	if (IS_ERR(info->rtc_dev)) {
+		ret = PTR_ERR(info->rtc_dev);
+		dev_err(&pdev->dev, "Failed to register RTC device: %d\n", ret);
+		return ret;
+	}
+
+	virq = irq_create_mapping(max8997->irq_domain, MAX8997_PMICIRQ_RTCA1);
+	if (!virq) {
+		dev_err(&pdev->dev, "Failed to create mapping alarm IRQ\n");
+		goto err_out;
+	}
+	info->virq = virq;
+
+	ret = request_threaded_irq(virq, NULL, max8997_rtc_alarm_irq, 0,
+				"rtc-alarm0", info);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to request alarm IRQ: %d: %d\n",
+			info->virq, ret);
+		goto err_out;
+	}
+
+	return ret;
+
+err_out:
+	rtc_device_unregister(info->rtc_dev);
+	return ret;
+}
+
+static int max8997_rtc_remove(struct platform_device *pdev)
+{
+	struct max8997_rtc_info *info = platform_get_drvdata(pdev);
+
+	if (info) {
+		free_irq(info->virq, info);
+		rtc_device_unregister(info->rtc_dev);
+	}
+
+	return 0;
+}
+
+static void max8997_rtc_shutdown(struct platform_device *pdev)
+{
+	struct max8997_rtc_info *info = platform_get_drvdata(pdev);
+
+	max8997_rtc_enable_wtsr(info, false);
+	max8997_rtc_enable_smpl(info, false);
+}
+
+static const struct platform_device_id rtc_id[] = {
+	{ "max8997-rtc", 0 },
+	{},
+};
+
+static struct platform_driver max8997_rtc_driver = {
+	.driver		= {
+		.name	= "max8997-rtc",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= max8997_rtc_probe,
+	.remove		= max8997_rtc_remove,
+	.shutdown	= max8997_rtc_shutdown,
+	.id_table	= rtc_id,
+};
+
+module_platform_driver(max8997_rtc_driver);
+
+MODULE_DESCRIPTION("Maxim MAX8997 RTC driver");
+MODULE_AUTHOR("<ms925.kim@samsung.com>");
+MODULE_LICENSE("GPL");