Patchwork [U-Boot] ppc: Remove PCIPPC2 and PCIPPC6 boards

login
register
mail settings
Submitter Stefan Roese
Date Feb. 7, 2013, 10:16 a.m.
Message ID <1360232218-6588-1-git-send-email-sr@denx.de>
Download mbox | patch
Permalink /patch/218880/
State Superseded
Headers show

Comments

Stefan Roese - Feb. 7, 2013, 10:16 a.m.
These boards seem to be unmaintained for quite some time. So lets
remove support for them completely. This also cleans up some
common drivers/files.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Guillaume Alexandre <guillaume.alexandre@gespac.ch>
Cc: Wolfgang Denk <wd@denx.de>
---
 MAINTAINERS                       |   3 -
 arch/powerpc/cpu/74xx_7xx/cpu.c   |   7 +-
 board/pcippc2/Makefile            |  47 ----
 board/pcippc2/cpc710.h            |  96 -------
 board/pcippc2/cpc710_init_ram.c   | 232 ---------------
 board/pcippc2/cpc710_pci.c        | 309 --------------------
 board/pcippc2/cpc710_pci.h        |  51 ----
 board/pcippc2/flash.c             | 573 --------------------------------------
 board/pcippc2/fpga_serial.c       | 125 ---------
 board/pcippc2/fpga_serial.h       |  33 ---
 board/pcippc2/hardware.h          |  48 ----
 board/pcippc2/i2c.c               | 257 -----------------
 board/pcippc2/i2c.h               |  36 ---
 board/pcippc2/ns16550.h           |  41 ---
 board/pcippc2/pcippc2.c           | 253 -----------------
 board/pcippc2/pcippc2.h           |  51 ----
 board/pcippc2/pcippc2_fpga.c      |  87 ------
 board/pcippc2/pcippc2_fpga.h      |  49 ----
 board/pcippc2/sconsole.c          | 162 -----------
 board/pcippc2/sconsole.h          |  48 ----
 boards.cfg                        |   2 -
 doc/driver-model/UDM-pci.txt      |   4 -
 doc/driver-model/UDM-watchdog.txt |   5 -
 drivers/rtc/mk48t59.c             |  14 -
 include/configs/PCIPPC2.h         | 251 -----------------
 include/configs/PCIPPC6.h         | 265 ------------------
 26 files changed, 3 insertions(+), 3046 deletions(-)
 delete mode 100644 board/pcippc2/Makefile
 delete mode 100644 board/pcippc2/cpc710.h
 delete mode 100644 board/pcippc2/cpc710_init_ram.c
 delete mode 100644 board/pcippc2/cpc710_pci.c
 delete mode 100644 board/pcippc2/cpc710_pci.h
 delete mode 100644 board/pcippc2/flash.c
 delete mode 100644 board/pcippc2/fpga_serial.c
 delete mode 100644 board/pcippc2/fpga_serial.h
 delete mode 100644 board/pcippc2/hardware.h
 delete mode 100644 board/pcippc2/i2c.c
 delete mode 100644 board/pcippc2/i2c.h
 delete mode 100644 board/pcippc2/ns16550.h
 delete mode 100644 board/pcippc2/pcippc2.c
 delete mode 100644 board/pcippc2/pcippc2.h
 delete mode 100644 board/pcippc2/pcippc2_fpga.c
 delete mode 100644 board/pcippc2/pcippc2_fpga.h
 delete mode 100644 board/pcippc2/sconsole.c
 delete mode 100644 board/pcippc2/sconsole.h
 delete mode 100644 include/configs/PCIPPC2.h
 delete mode 100644 include/configs/PCIPPC6.h
Wolfgang Denk - Feb. 7, 2013, 10:36 a.m.
Dear Stefan Roese,

In message <1360232218-6588-1-git-send-email-sr@denx.de> you wrote:
> These boards seem to be unmaintained for quite some time. So lets
> remove support for them completely. This also cleans up some
> common drivers/files.
> 
> Signed-off-by: Stefan Roese <sr@denx.de>
> Cc: Guillaume Alexandre <guillaume.alexandre@gespac.ch>
> Cc: Wolfgang Denk <wd@denx.de>
> ---
>  MAINTAINERS                       |   3 -
>  arch/powerpc/cpu/74xx_7xx/cpu.c   |   7 +-
>  board/pcippc2/Makefile            |  47 ----
>  board/pcippc2/cpc710.h            |  96 -------
>  board/pcippc2/cpc710_init_ram.c   | 232 ---------------
>  board/pcippc2/cpc710_pci.c        | 309 --------------------
>  board/pcippc2/cpc710_pci.h        |  51 ----
>  board/pcippc2/flash.c             | 573 --------------------------------------
>  board/pcippc2/fpga_serial.c       | 125 ---------
>  board/pcippc2/fpga_serial.h       |  33 ---
>  board/pcippc2/hardware.h          |  48 ----
>  board/pcippc2/i2c.c               | 257 -----------------
>  board/pcippc2/i2c.h               |  36 ---
>  board/pcippc2/ns16550.h           |  41 ---
>  board/pcippc2/pcippc2.c           | 253 -----------------
>  board/pcippc2/pcippc2.h           |  51 ----
>  board/pcippc2/pcippc2_fpga.c      |  87 ------
>  board/pcippc2/pcippc2_fpga.h      |  49 ----
>  board/pcippc2/sconsole.c          | 162 -----------
>  board/pcippc2/sconsole.h          |  48 ----
>  boards.cfg                        |   2 -
>  doc/driver-model/UDM-pci.txt      |   4 -
>  doc/driver-model/UDM-watchdog.txt |   5 -
>  drivers/rtc/mk48t59.c             |  14 -
>  include/configs/PCIPPC2.h         | 251 -----------------
>  include/configs/PCIPPC6.h         | 265 ------------------

Please also make appropriate entries in doc/README.scrapyard

Except for this:

Acked-by: Wolfgang Denk <wd@denx.de>

Best regards,

Wolfgang Denk

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index 674780a..95bfcec 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -150,9 +150,6 @@  Wolfgang Denk <wd@denx.de>
 
 	P3G4		MPC7410
 
-	PCIPPC2		MPC750
-	PCIPPC6		MPC750
-
 Phil Edworthy <phil.edworthy@renesas.com>
 
 	rsk7264		SH7264
diff --git a/arch/powerpc/cpu/74xx_7xx/cpu.c b/arch/powerpc/cpu/74xx_7xx/cpu.c
index b6a31b4..17694a1 100644
--- a/arch/powerpc/cpu/74xx_7xx/cpu.c
+++ b/arch/powerpc/cpu/74xx_7xx/cpu.c
@@ -229,8 +229,7 @@  soft_restart(unsigned long addr)
 }
 
 
-#if !defined(CONFIG_PCIPPC2) && \
-    !defined(CONFIG_BAB7xx)  && \
+#if !defined(CONFIG_BAB7xx)  && \
     !defined(CONFIG_ELPPC)   && \
     !defined(CONFIG_PPMC7XX)
 /* no generic way to do board reset. simply call soft_reset. */
@@ -288,13 +287,13 @@  unsigned long get_tbclk(void)
 /* ------------------------------------------------------------------------- */
 
 #if defined(CONFIG_WATCHDOG)
-#if !defined(CONFIG_PCIPPC2) && !defined(CONFIG_BAB7xx)
+#if !defined(CONFIG_BAB7xx)
 void
 watchdog_reset(void)
 {
 
 }
-#endif  /* !CONFIG_PCIPPC2 && !CONFIG_BAB7xx */
+#endif  /* !CONFIG_BAB7xx */
 #endif	/* CONFIG_WATCHDOG */
 
 /* ------------------------------------------------------------------------- */
diff --git a/board/pcippc2/Makefile b/board/pcippc2/Makefile
deleted file mode 100644
index 6f0a928..0000000
--- a/board/pcippc2/Makefile
+++ /dev/null
@@ -1,47 +0,0 @@ 
-#
-# (C) Copyright 2002-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).o
-
-COBJS	= $(BOARD).o cpc710_pci.o flash.o sconsole.o \
-	  fpga_serial.o pcippc2_fpga.o cpc710_init_ram.o i2c.o
-
-SOBJS	=
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/pcippc2/cpc710.h b/board/pcippc2/cpc710.h
deleted file mode 100644
index 8167270..0000000
--- a/board/pcippc2/cpc710.h
+++ /dev/null
@@ -1,96 +0,0 @@ 
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _CPC710_H_
-#define _CPC710_H_
-
-/* Revision */
-#define CPC710_TYPE_100	0x80
-#define CPC710_TYPE_100P	0x90
-
-/* System control area */
-#define HW_PHYS_SCA		0xff000000
-
-#define HW_SCA_CPC0		0x000000
-#define HW_SCA_SDRAM0		0x000000
-#define HW_SCA_DMA0		0x1C0000
-
-#define HW_PHYS_CPC0		(HW_PHYS_SCA + HW_SCA_CPC0)
-#define HW_PHYS_SDRAM0		(HW_PHYS_SCA + HW_SCA_SDRAM0)
-
-#define HW_CPC0_PCICNFR		0x000c
-#define HW_CPC0_RSTR		0x0010
-#define HW_CPC0_SPOR		0x00e8
-#define HW_CPC0_UCTL		0x1000
-#define HW_CPC0_SIOC0		0x1020
-#define HW_CPC0_ABCNTL		0x1030
-#define HW_CPC0_SESR		0x1060
-#define HW_CPC0_SEAR		0x1070
-#define HW_CPC0_PGCHP		0x1100
-#define HW_CPC0_RGBAN0		0x1110
-#define HW_CPC0_RGBAN1		0x1120
-
-#define HW_CPC0_GPDIR		0x1130
-#define HW_CPC0_GPIN		0x1140
-#define HW_CPC0_GPOUT		0x1150
-
-#define HW_CPC0_ATAS		0x1160
-
-#define HW_CPC0_PCIBAR		0x200018
-#define HW_CPC0_PCIENB		0x201000
-
-#define HW_SDRAM0_MCCR		0x1200
-#define HW_SDRAM0_MESR		0x1220
-#define HW_SDRAM0_MEAR		0x1230
-
-#define HW_SDRAM0_MCER0		0x1300
-#define HW_SDRAM0_MCER1		0x1310
-#define HW_SDRAM0_MCER2		0x1320
-#define HW_SDRAM0_MCER3		0x1330
-#define HW_SDRAM0_MCER4		0x1340
-#define HW_SDRAM0_MCER5		0x1350
-#define HW_SDRAM0_MCER6		0x1360
-#define HW_SDRAM0_MCER7		0x1370
-
-#define HW_BRIDGE_PCIDG		0xf6120
-#define HW_BRIDGE_INTACK	0xf7700
-#define HW_BRIDGE_PIBAR		0xf7800
-#define HW_BRIDGE_PMBAR		0xf7810
-#define HW_BRIDGE_CRR		0xf7ef0
-#define HW_BRIDGE_PR		0xf7f20
-#define HW_BRIDGE_ACR		0xf7f30
-#define HW_BRIDGE_MSIZE		0xf7f40
-#define HW_BRIDGE_IOSIZE	0xf7f60
-#define HW_BRIDGE_SMBAR		0xf7f80
-#define HW_BRIDGE_SIBAR		0xf7fc0
-#define HW_BRIDGE_CFGADDR	0xf8000
-#define HW_BRIDGE_CFGDATA	0xf8010
-#define HW_BRIDGE_PSSIZE	0xf8100
-#define HW_BRIDGE_BARPS		0xf8120
-#define HW_BRIDGE_PSBAR		0xf8140
-
-/* Configuration space registers */
-#define CPC710_BUS_NUMBER	0x40
-#define CPC710_SUB_BUS_NUMBER	0x41
-
-#endif
diff --git a/board/pcippc2/cpc710_init_ram.c b/board/pcippc2/cpc710_init_ram.c
deleted file mode 100644
index 8945351..0000000
--- a/board/pcippc2/cpc710_init_ram.c
+++ /dev/null
@@ -1,232 +0,0 @@ 
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <common.h>
-#include <asm/io.h>
-
-#include "pcippc2.h"
-#include "i2c.h"
-
-typedef struct cpc710_mem_org_s {
-	u8 rows;
-	u8 cols;
-	u8 banks2;
-	u8 org;
-} cpc710_mem_org_t;
-
-static int cpc710_compute_mcer (u32 * mcer,
-				unsigned long *size, unsigned int sdram);
-static int cpc710_eeprom_checksum (unsigned int sdram);
-static u8 cpc710_eeprom_read (unsigned int sdram, unsigned int offset);
-
-static u32 cpc710_mcer_mem[] = {
-	0x000003f3,		/* 18 lines,    4 Mb */
-	0x000003e3,		/* 19 lines,    8 Mb */
-	0x000003c3,		/* 20 lines,   16 Mb */
-	0x00000383,		/* 21 lines,   32 Mb */
-	0x00000303,		/* 22 lines,   64 Mb */
-	0x00000203,		/* 23 lines,  128 Mb */
-	0x00000003,		/* 24 lines,  256 Mb */
-	0x00000002,		/* 25 lines,  512 Mb */
-	0x00000001		/* 26 lines, 1024 Mb */
-};
-static cpc710_mem_org_t cpc710_mem_org[] = {
-	{0x0c, 0x09, 0x02, 0x00},	/* 0000: 12/ 9/2 */
-	{0x0d, 0x09, 0x02, 0x00},	/* 0000: 13/ 9/2 */
-	{0x0d, 0x0a, 0x02, 0x00},	/* 0000: 13/10/2 */
-	{0x0d, 0x0b, 0x02, 0x00},	/* 0000: 13/11/2 */
-	{0x0d, 0x0c, 0x02, 0x00},	/* 0000: 13/12/2 */
-	{0x0e, 0x0c, 0x02, 0x00},	/* 0000: 14/12/2 */
-	{0x0b, 0x08, 0x02, 0x01},	/* 0001: 11/ 8/2 */
-	{0x0b, 0x09, 0x01, 0x02},	/* 0010: 11/ 9/1 */
-	{0x0b, 0x0a, 0x01, 0x03},	/* 0011: 11/10/1 */
-	{0x0c, 0x08, 0x02, 0x04},	/* 0100: 12/ 8/2 */
-	{0x0c, 0x0a, 0x02, 0x05},	/* 0101: 12/10/2 */
-	{0x0d, 0x08, 0x01, 0x06},	/* 0110: 13/ 8/1 */
-	{0x0d, 0x08, 0x02, 0x07},	/* 0111: 13/ 8/2 */
-	{0x0d, 0x09, 0x01, 0x08},	/* 1000: 13/ 9/1 */
-	{0x0d, 0x0a, 0x01, 0x09},	/* 1001: 13/10/1 */
-	{0x0b, 0x08, 0x01, 0x0a},	/* 1010: 11/ 8/1 */
-	{0x0c, 0x08, 0x01, 0x0b},	/* 1011: 12/ 8/1 */
-	{0x0c, 0x09, 0x01, 0x0c},	/* 1100: 12/ 9/1 */
-	{0x0e, 0x09, 0x02, 0x0d},	/* 1101: 14/ 9/2 */
-	{0x0e, 0x0a, 0x02, 0x0e},	/* 1110: 14/10/2 */
-	{0x0e, 0x0b, 0x02, 0x0f}	/* 1111: 14/11/2 */
-};
-
-unsigned long cpc710_ram_init (void)
-{
-	unsigned long memsize = 0;
-	unsigned long bank_size;
-	u32 mcer;
-
-#ifndef CONFIG_SYS_RAMBOOT
-	/* Clear memory banks
-	 */
-	out32 (REG (SDRAM0, MCER0), 0);
-	out32 (REG (SDRAM0, MCER1), 0);
-	out32 (REG (SDRAM0, MCER2), 0);
-	out32 (REG (SDRAM0, MCER3), 0);
-	out32 (REG (SDRAM0, MCER4), 0);
-	out32 (REG (SDRAM0, MCER5), 0);
-	out32 (REG (SDRAM0, MCER6), 0);
-	out32 (REG (SDRAM0, MCER7), 0);
-	iobarrier_rw ();
-
-	/* Disable memory
-	 */
-	out32 (REG (SDRAM0, MCCR), 0x13b06000);
-	iobarrier_rw ();
-#endif
-
-	/* Only the first memory bank is initialised now
-	 */
-	if (!cpc710_compute_mcer (&mcer, &bank_size, 0)) {
-		puts ("Unsupported SDRAM type !\n");
-		hang ();
-	}
-	memsize += bank_size;
-#ifndef CONFIG_SYS_RAMBOOT
-	/* Enable bank, zero start
-	 */
-	out32 (REG (SDRAM0, MCER0), mcer | 0x80000000);
-	iobarrier_rw ();
-#endif
-
-#ifndef CONFIG_SYS_RAMBOOT
-	/* Enable memory
-	 */
-	out32 (REG (SDRAM0, MCCR), in32 (REG (SDRAM0, MCCR)) | 0x80000000);
-
-	/* Wait until initialisation finished
-	 */
-	while (!(in32 (REG (SDRAM0, MCCR)) & 0x20000000)) {
-		iobarrier_rw ();
-	}
-
-	/* Clear Memory Error Status and Address registers
-	 */
-	out32 (REG (SDRAM0, MESR), 0);
-	out32 (REG (SDRAM0, MEAR), 0);
-	iobarrier_rw ();
-
-	/* ECC is not configured now
-	 */
-#endif
-
-	/* Memory size counter
-	 */
-	out32 (REG (CPC0, RGBAN1), memsize);
-
-	return memsize;
-}
-
-static int cpc710_compute_mcer (u32 * mcer, unsigned long *size, unsigned int sdram)
-{
-	u8 rows;
-	u8 cols;
-	u8 banks2;
-	unsigned int lines;
-	u32 mc = 0;
-	unsigned int i;
-	cpc710_mem_org_t *org = 0;
-
-	if (!i2c_reset ()) {
-		puts ("Can't reset I2C!\n");
-		hang ();
-	}
-
-	if (!cpc710_eeprom_checksum (sdram)) {
-		puts ("Invalid EEPROM checksum !\n");
-		hang ();
-	}
-
-	rows = cpc710_eeprom_read (sdram, 3);
-	cols = cpc710_eeprom_read (sdram, 4);
-	/* Can be 2 or 4 banks; divide by 2
-	 */
-	banks2 = cpc710_eeprom_read (sdram, 17) / 2;
-
-	lines = rows + cols + banks2;
-
-	if (lines < 18 || lines > 26) {
-		/* Unsupported configuration
-		 */
-		return 0;
-	}
-
-	mc |= cpc710_mcer_mem[lines - 18] << 6;
-
-	for (i = 0; i < sizeof (cpc710_mem_org) / sizeof (cpc710_mem_org_t);
-	     i++) {
-		cpc710_mem_org_t *corg = cpc710_mem_org + i;
-
-		if (corg->rows == rows && corg->cols == cols
-		    && corg->banks2 == banks2) {
-			org = corg;
-
-			break;
-		}
-	}
-
-	if (!org) {
-		/* Unsupported configuration
-		 */
-		return 0;
-	}
-
-	mc |= (u32) org->org << 2;
-
-	/* Supported configuration
-	 */
-	*mcer = mc;
-	*size = 1l << (lines + 4);
-
-	return 1;
-}
-
-static int cpc710_eeprom_checksum (unsigned int sdram)
-{
-	u8 sum = 0;
-	unsigned int i;
-
-	for (i = 0; i < 63; i++) {
-		sum += cpc710_eeprom_read (sdram, i);
-	}
-
-	return sum == cpc710_eeprom_read (sdram, 63);
-}
-
-static u8 cpc710_eeprom_read (unsigned int sdram, unsigned int offset)
-{
-	u8 dev = (sdram << 1) | 0xa0;
-	u8 data;
-
-	if (!i2c_read_byte (&data, dev, offset)) {
-		puts ("I2C error !\n");
-		hang ();
-	}
-
-	return data;
-}
diff --git a/board/pcippc2/cpc710_pci.c b/board/pcippc2/cpc710_pci.c
deleted file mode 100644
index ccd18e1..0000000
--- a/board/pcippc2/cpc710_pci.c
+++ /dev/null
@@ -1,309 +0,0 @@ 
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <common.h>
-#include <asm/io.h>
-#include <pci.h>
-
-#include "hardware.h"
-#include "pcippc2.h"
-
-struct pci_controller local_hose, cpci_hose;
-
-static u32	cpc710_mapped_ram;
-
-  /* Enable PCI retry timeouts
-   */
-void cpc710_pci_enable_timeout (void)
-{
-  out32(BRIDGE(LOCAL, CFGADDR), 0x50000080);
-  iobarrier_rw();
-  out32(BRIDGE(LOCAL, CFGDATA), 0x32000000);
-  iobarrier_rw();
-
-  out32(BRIDGE(CPCI, CFGADDR), 0x50000180);
-  iobarrier_rw();
-  out32(BRIDGE(CPCI, CFGDATA), 0x32000000);
-  iobarrier_rw();
-}
-
-void cpc710_pci_init (void)
-{
-  u32			sdram_size = pcippc2_sdram_size();
-
-  cpc710_mapped_ram = sdram_size < PCI_MEMORY_MAXSIZE ?
-		      sdram_size : PCI_MEMORY_MAXSIZE;
-
-    /* Select the local PCI
-     */
-  out32(REG(CPC0, PCICNFR), 0x80000002);
-  iobarrier_rw();
-
-  out32(REG(CPC0, PCIBAR), BRIDGE_LOCAL_PHYS);
-  iobarrier_rw();
-
-    /* Enable PCI bridge address decoding
-     */
-  out32(REG(CPC0, PCIENB), 0x80000000);
-  iobarrier_rw();
-
-    /* Select the CPCI bridge
-     */
-  out32(REG(CPC0, PCICNFR), 0x80000003);
-  iobarrier_rw();
-
-  out32(REG(CPC0, PCIBAR), BRIDGE_CPCI_PHYS);
-  iobarrier_rw();
-
-    /* Enable PCI bridge address decoding
-     */
-  out32(REG(CPC0, PCIENB), 0x80000000);
-  iobarrier_rw();
-
-    /* Disable configuration accesses
-     */
-  out32(REG(CPC0, PCICNFR), 0x80000000);
-  iobarrier_rw();
-
-    /* Initialise the local PCI
-     */
-  out32(BRIDGE(LOCAL, CRR), 0x7c000000);
-  iobarrier_rw();
-  out32(BRIDGE(LOCAL, PCIDG), 0x40000000);
-  iobarrier_rw();
-  out32(BRIDGE(LOCAL, PIBAR), BRIDGE_LOCAL_IO_BUS);
-  out32(BRIDGE(LOCAL, SIBAR), BRIDGE_LOCAL_IO_PHYS);
-  out32(BRIDGE(LOCAL, IOSIZE), -BRIDGE_LOCAL_IO_SIZE);
-  iobarrier_rw();
-  out32(BRIDGE(LOCAL, PMBAR), BRIDGE_LOCAL_MEM_BUS);
-  out32(BRIDGE(LOCAL, SMBAR), BRIDGE_LOCAL_MEM_PHYS);
-  out32(BRIDGE(LOCAL, MSIZE), -BRIDGE_LOCAL_MEM_SIZE);
-  iobarrier_rw();
-  out32(BRIDGE(LOCAL, PR), 0x00ffe000);
-  iobarrier_rw();
-  out32(BRIDGE(LOCAL, ACR), 0xfe000000);
-  iobarrier_rw();
-  out32(BRIDGE(LOCAL, PSBAR), PCI_MEMORY_BUS >> 24);
-  out32(BRIDGE(LOCAL, BARPS), PCI_MEMORY_PHYS >> 24);
-  out32(BRIDGE(LOCAL, PSSIZE), 256 - (cpc710_mapped_ram >> 24));
-  iobarrier_rw();
-
-    /* Initialise the CPCI bridge
-     */
-  out32(BRIDGE(CPCI, CRR), 0x7c000000);
-  iobarrier_rw();
-  out32(BRIDGE(CPCI, PCIDG), 0xC0000000);
-  iobarrier_rw();
-  out32(BRIDGE(CPCI, PIBAR), BRIDGE_CPCI_IO_BUS);
-  out32(BRIDGE(CPCI, SIBAR), BRIDGE_CPCI_IO_PHYS);
-  out32(BRIDGE(CPCI, IOSIZE), -BRIDGE_CPCI_IO_SIZE);
-  iobarrier_rw();
-  out32(BRIDGE(CPCI, PMBAR), BRIDGE_CPCI_MEM_BUS);
-  out32(BRIDGE(CPCI, SMBAR), BRIDGE_CPCI_MEM_PHYS);
-  out32(BRIDGE(CPCI, MSIZE), -BRIDGE_CPCI_MEM_SIZE);
-  iobarrier_rw();
-  out32(BRIDGE(CPCI, PR), 0x80ffe000);
-  iobarrier_rw();
-  out32(BRIDGE(CPCI, ACR), 0xdf000000);
-  iobarrier_rw();
-  out32(BRIDGE(CPCI, PSBAR), PCI_MEMORY_BUS >> 24);
-  out32(BRIDGE(CPCI, BARPS), PCI_MEMORY_PHYS >> 24);
-  out32(BRIDGE(CPCI, PSSIZE), 256 - (cpc710_mapped_ram >> 24));
-  iobarrier_rw();
-
-    /* Local PCI
-     */
-
-  out32(BRIDGE(LOCAL, CFGADDR), 0x04000080);
-  iobarrier_rw();
-  out32(BRIDGE(LOCAL, CFGDATA), 0x56010000);
-  iobarrier_rw();
-
-  out32(BRIDGE(LOCAL, CFGADDR), 0x0c000080);
-  iobarrier_rw();
-  out32(BRIDGE(LOCAL, CFGDATA), PCI_LATENCY_TIMER_VAL << 16);
-  iobarrier_rw();
-
-    /* Set bus and subbus numbers
-     */
-  out32(BRIDGE(LOCAL, CFGADDR), 0x40000080);
-  iobarrier_rw();
-  out32(BRIDGE(LOCAL, CFGDATA), 0x00000000);
-  iobarrier_rw();
-
-  out32(BRIDGE(LOCAL, CFGADDR), 0x50000080);
-  iobarrier_rw();
-    /* PCI retry timeouts will be enabled later
-     */
-  out32(BRIDGE(LOCAL, CFGDATA), 0x00000000);
-  iobarrier_rw();
-
-    /* CPCI
-     */
-
-    /* Set bus and subbus numbers
-     */
-  out32(BRIDGE(CPCI, CFGADDR), 0x40000080);
-  iobarrier_rw();
-  out32(BRIDGE(CPCI, CFGDATA), 0x01010000);
-  iobarrier_rw();
-
-  out32(BRIDGE(CPCI, CFGADDR), 0x04000180);
-  iobarrier_rw();
-  out32(BRIDGE(CPCI, CFGDATA), 0x56010000);
-  iobarrier_rw();
-
-  out32(BRIDGE(CPCI, CFGADDR), 0x0c000180);
-  iobarrier_rw();
-  out32(BRIDGE(CPCI, CFGDATA), PCI_LATENCY_TIMER_VAL << 16);
-  iobarrier_rw();
-
-    /* Write to the PSBAR */
-  out32(BRIDGE(CPCI, CFGADDR), 0x10000180);
-  iobarrier_rw();
-  out32(BRIDGE(CPCI, CFGDATA), cpu_to_le32(PCI_MEMORY_BUS));
-  iobarrier_rw();
-
-    /* Set bus and subbus numbers
-     */
-  out32(BRIDGE(CPCI, CFGADDR), 0x40000180);
-  iobarrier_rw();
-  out32(BRIDGE(CPCI, CFGDATA), 0x01ff0000);
-  iobarrier_rw();
-
-  out32(BRIDGE(CPCI, CFGADDR), 0x50000180);
-  iobarrier_rw();
-  out32(BRIDGE(CPCI, CFGDATA), 0x32000000);
-    /* PCI retry timeouts will be enabled later
-     */
-  out32(BRIDGE(CPCI, CFGDATA), 0x00000000);
-  iobarrier_rw();
-
-    /* Remove reset on the PCI buses
-     */
-  out32(BRIDGE(LOCAL, CRR), 0xfc000000);
-  iobarrier_rw();
-  out32(BRIDGE(CPCI, CRR), 0xfc000000);
-  iobarrier_rw();
-
-  local_hose.first_busno = 0;
-  local_hose.last_busno = 0xff;
-
-  /* System memory space */
-  pci_set_region(local_hose.regions + 0,
-		 PCI_MEMORY_BUS,
-		 PCI_MEMORY_PHYS,
-		 PCI_MEMORY_MAXSIZE,
-		 PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
-
-  /* PCI memory space */
-  pci_set_region(local_hose.regions + 1,
-		 BRIDGE_LOCAL_MEM_BUS,
-		 BRIDGE_LOCAL_MEM_PHYS,
-		 BRIDGE_LOCAL_MEM_SIZE,
-		 PCI_REGION_MEM);
-
-  /* PCI I/O space */
-  pci_set_region(local_hose.regions + 2,
-		 BRIDGE_LOCAL_IO_BUS,
-		 BRIDGE_LOCAL_IO_PHYS,
-		 BRIDGE_LOCAL_IO_SIZE,
-		 PCI_REGION_IO);
-
-  local_hose.region_count = 3;
-
-  pci_setup_indirect(&local_hose,
-		     BRIDGE_LOCAL_PHYS + HW_BRIDGE_CFGADDR,
-		     BRIDGE_LOCAL_PHYS + HW_BRIDGE_CFGDATA);
-
-  pci_register_hose(&local_hose);
-
-  /* Initialize PCI32 bus registers */
-  pci_hose_write_config_byte(&local_hose,
-			  PCI_BDF(local_hose.first_busno,0,0),
-			  CPC710_BUS_NUMBER,
-			  local_hose.first_busno);
-  pci_hose_write_config_byte(&local_hose,
-			  PCI_BDF(local_hose.first_busno,0,0),
-			  CPC710_SUB_BUS_NUMBER,
-			  local_hose.last_busno);
-
-  local_hose.last_busno = pci_hose_scan(&local_hose);
-
-  /* Write out correct max subordinate bus number for local hose */
-  pci_hose_write_config_byte(&local_hose,
-			  PCI_BDF(local_hose.first_busno,0,0),
-			  CPC710_SUB_BUS_NUMBER,
-			  local_hose.last_busno);
-
-  cpci_hose.first_busno = local_hose.last_busno + 1;
-  cpci_hose.last_busno = 0xff;
-
-  /* System memory space */
-  pci_set_region(cpci_hose.regions + 0,
-		 PCI_MEMORY_BUS,
-		 PCI_MEMORY_PHYS,
-		 PCI_MEMORY_MAXSIZE,
-		 PCI_REGION_SYS_MEMORY);
-
-  /* PCI memory space */
-  pci_set_region(cpci_hose.regions + 1,
-		 BRIDGE_CPCI_MEM_BUS,
-		 BRIDGE_CPCI_MEM_PHYS,
-		 BRIDGE_CPCI_MEM_SIZE,
-		 PCI_REGION_MEM);
-
-  /* PCI I/O space */
-  pci_set_region(cpci_hose.regions + 2,
-		 BRIDGE_CPCI_IO_BUS,
-		 BRIDGE_CPCI_IO_PHYS,
-		 BRIDGE_CPCI_IO_SIZE,
-		 PCI_REGION_IO);
-
-  cpci_hose.region_count = 3;
-
-  pci_setup_indirect(&cpci_hose,
-		     BRIDGE_CPCI_PHYS + HW_BRIDGE_CFGADDR,
-		     BRIDGE_CPCI_PHYS + HW_BRIDGE_CFGDATA);
-
-  pci_register_hose(&cpci_hose);
-
-  /* Initialize PCI64 bus registers */
-  pci_hose_write_config_byte(&cpci_hose,
-			  PCI_BDF(cpci_hose.first_busno,0,0),
-			  CPC710_BUS_NUMBER,
-			  cpci_hose.first_busno);
-  pci_hose_write_config_byte(&cpci_hose,
-			  PCI_BDF(cpci_hose.first_busno,0,0),
-			  CPC710_SUB_BUS_NUMBER,
-			  cpci_hose.last_busno);
-
-  cpci_hose.last_busno = pci_hose_scan(&cpci_hose);
-
-  /* Write out correct max subordinate bus number for cpci hose */
-  pci_hose_write_config_byte(&cpci_hose,
-			  PCI_BDF(cpci_hose.first_busno,0,0),
-			  CPC710_SUB_BUS_NUMBER,
-			  cpci_hose.last_busno);
-}
diff --git a/board/pcippc2/cpc710_pci.h b/board/pcippc2/cpc710_pci.h
deleted file mode 100644
index 24d0db6..0000000
--- a/board/pcippc2/cpc710_pci.h
+++ /dev/null
@@ -1,51 +0,0 @@ 
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _CPC710_PCI_H_
-#define _CPC710_PCI_H_
-
-#define PCI_MEMORY_PHYS		0x00000000
-#define PCI_MEMORY_BUS		0x80000000
-#define PCI_MEMORY_MAXSIZE      0x20000000
-
-#define BRIDGE_CPCI_PHYS	0xff500000
-#define BRIDGE_CPCI_MEM_SIZE	0x08000000
-#define BRIDGE_CPCI_MEM_PHYS    0xf0000000
-#define BRIDGE_CPCI_MEM_BUS     0x00000000
-#define BRIDGE_CPCI_IO_SIZE	0x02000000
-#define BRIDGE_CPCI_IO_PHYS     0xfc000000
-#define BRIDGE_CPCI_IO_BUS      0x00000000
-
-#define BRIDGE_LOCAL_PHYS	0xff400000
-#define BRIDGE_LOCAL_MEM_SIZE	0x04000000
-#define BRIDGE_LOCAL_MEM_PHYS   0xf8000000
-#define BRIDGE_LOCAL_MEM_BUS    0x40000000
-#define BRIDGE_LOCAL_IO_SIZE	0x01000000
-#define BRIDGE_LOCAL_IO_PHYS    0xfe000000
-#define BRIDGE_LOCAL_IO_BUS     0x04000000
-
-#define BRIDGE(r, x)		(BRIDGE_##r##_PHYS + HW_BRIDGE_##x)
-
-#define PCI_LATENCY_TIMER_VAL	0xff
-
-#endif
diff --git a/board/pcippc2/flash.c b/board/pcippc2/flash.c
deleted file mode 100644
index ec604e0..0000000
--- a/board/pcippc2/flash.c
+++ /dev/null
@@ -1,573 +0,0 @@ 
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <common.h>
-#include <flash.h>
-#include <asm/io.h>
-
-/*---------------------------------------------------------------------*/
-#undef DEBUG_FLASH
-
-#ifdef DEBUG_FLASH
-#define DEBUGF(fmt,args...) printf(fmt ,##args)
-#else
-#define DEBUGF(fmt,args...)
-#endif
-/*---------------------------------------------------------------------*/
-
-flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-static ulong flash_get_size (ulong addr, flash_info_t *info);
-static int flash_get_offsets (ulong base, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-static void flash_reset (ulong addr);
-
-unsigned long flash_init (void)
-{
-	unsigned int i;
-	unsigned long flash_size = 0;
-
-	/* Init: no FLASHes known */
-	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-		flash_info[i].sector_count = 0;
-		flash_info[i].size = 0;
-	}
-
-	DEBUGF("\n## Get flash size @ 0x%08x\n", CONFIG_SYS_FLASH_BASE);
-
-	flash_size = flash_get_size (CONFIG_SYS_FLASH_BASE, flash_info);
-
-	DEBUGF("## Flash bank size: %08lx\n", flash_size);
-
-	if (flash_size) {
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE && \
-    CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_MAX_SIZE
-		/* monitor protection ON by default */
-		flash_protect(FLAG_PROTECT_SET,
-			      CONFIG_SYS_MONITOR_BASE,
-			      CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
-			      &flash_info[0]);
-#endif
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
-		/* ENV protection ON by default */
-		flash_protect(FLAG_PROTECT_SET,
-			      CONFIG_ENV_ADDR,
-			      CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
-			      &flash_info[0]);
-#endif
-
-	} else {
-		puts ("Warning: the BOOT Flash is not initialised !");
-	}
-
-	return flash_size;
-}
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (ulong addr, flash_info_t *info)
-{
-	short i;
-	uchar value;
-
-	/* Write auto select command: read Manufacturer ID */
-	out8(addr + 0x0555, 0xAA);
-	iobarrier_rw();
-	out8(addr + 0x02AA, 0x55);
-	iobarrier_rw();
-	out8(addr + 0x0555, 0x90);
-	iobarrier_rw();
-
-	value = in8(addr);
-	iobarrier_rw();
-
-	DEBUGF("Manuf. ID @ 0x%08lx: 0x%08x\n", (ulong)addr, value);
-
-	switch (value | (value << 16)) {
-		case AMD_MANUFACT:
-			info->flash_id = FLASH_MAN_AMD;
-			break;
-
-		case FUJ_MANUFACT:
-			info->flash_id = FLASH_MAN_FUJ;
-			break;
-
-		case STM_MANUFACT:
-			info->flash_id = FLASH_MAN_STM;
-			break;
-
-		default:
-			info->flash_id = FLASH_UNKNOWN;
-			info->sector_count = 0;
-			info->size = 0;
-			flash_reset (addr);
-			return 0;
-	}
-
-	value = in8(addr + 1);			/* device ID		*/
-	iobarrier_rw();
-
-	DEBUGF("Device ID @ 0x%08lx: 0x%08x\n", addr+1, value);
-
-	switch ((ulong)value) {
-		case AMD_ID_F040B:
-			DEBUGF("Am29F040B\n");
-			info->flash_id += FLASH_AM040;
-			info->sector_count = 8;
-			info->size = 0x00080000;
-			break;			/* => 512 kB		*/
-
-		case AMD_ID_LV040B:
-			DEBUGF("Am29LV040B\n");
-			info->flash_id += FLASH_AM040;
-			info->sector_count = 8;
-			info->size = 0x00080000;
-			break;			/* => 512 kB		*/
-
-		case AMD_ID_LV400T:
-			DEBUGF("Am29LV400T\n");
-			info->flash_id += FLASH_AM400T;
-			info->sector_count = 11;
-			info->size = 0x00100000;
-			break;			/* => 1 MB		*/
-
-		case AMD_ID_LV400B:
-			DEBUGF("Am29LV400B\n");
-			info->flash_id += FLASH_AM400B;
-			info->sector_count = 11;
-			info->size = 0x00100000;
-			break;			/* => 1 MB		*/
-
-		case AMD_ID_LV800T:
-			DEBUGF("Am29LV800T\n");
-			info->flash_id += FLASH_AM800T;
-			info->sector_count = 19;
-			info->size = 0x00200000;
-			break;			/* => 2 MB		*/
-
-		case AMD_ID_LV800B:
-			DEBUGF("Am29LV400B\n");
-			info->flash_id += FLASH_AM800B;
-			info->sector_count = 19;
-			info->size = 0x00200000;
-			break;			/* => 2 MB		*/
-
-		case AMD_ID_LV160T:
-			DEBUGF("Am29LV160T\n");
-			info->flash_id += FLASH_AM160T;
-			info->sector_count = 35;
-			info->size = 0x00400000;
-			break;			/* => 4 MB		*/
-
-		case AMD_ID_LV160B:
-			DEBUGF("Am29LV160B\n");
-			info->flash_id += FLASH_AM160B;
-			info->sector_count = 35;
-			info->size = 0x00400000;
-			break;			/* => 4 MB		*/
-
-		case AMD_ID_LV320T:
-			DEBUGF("Am29LV320T\n");
-			info->flash_id += FLASH_AM320T;
-			info->sector_count = 67;
-			info->size = 0x00800000;
-			break;			/* => 8 MB		*/
-
-#if 0
-		/* Has the same ID as AMD_ID_LV320T, to be fixed */
-		case AMD_ID_LV320B:
-			DEBUGF("Am29LV320B\n");
-			info->flash_id += FLASH_AM320B;
-			info->sector_count = 67;
-			info->size = 0x00800000;
-			break;			/* => 8 MB		*/
-#endif
-
-		case AMD_ID_LV033C:
-			DEBUGF("Am29LV033C\n");
-			info->flash_id += FLASH_AM033C;
-			info->sector_count = 64;
-			info->size = 0x01000000;
-			break;			/* => 16Mb		*/
-
-		case STM_ID_F040B:
-			DEBUGF("M29F040B\n");
-			info->flash_id += FLASH_AM040;
-			info->sector_count = 8;
-			info->size = 0x00080000;
-			break;			/* => 512 kB		*/
-
-		default:
-			info->flash_id = FLASH_UNKNOWN;
-			flash_reset (addr);
-			return (0);		/* => no or unknown flash */
-
-	}
-
-	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
-		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
-		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-	}
-
-	if (! flash_get_offsets (addr, info)) {
-		flash_reset (addr);
-		return 0;
-	}
-
-	/* check for protected sectors */
-	for (i = 0; i < info->sector_count; i++) {
-		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
-		/* D0 = 1 if protected */
-		value = in8(info->start[i] + 2);
-		iobarrier_rw();
-		info->protect[i] = (value & 1) != 0;
-	}
-
-	/*
-	 * Reset bank to read mode
-	 */
-	flash_reset (addr);
-
-	return (info->size);
-}
-
-static int flash_get_offsets (ulong base, flash_info_t *info)
-{
-	unsigned int i;
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-		case FLASH_AM040:
-			/* set sector offsets for uniform sector type	*/
-			for (i = 0; i < info->sector_count; i++) {
-				info->start[i] = base + i * info->size /
-				                            info->sector_count;
-			}
-			break;
-		default:
-			return 0;
-	}
-
-	return 1;
-}
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-	volatile ulong addr = info->start[0];
-	int flag, prot, sect, l_sect;
-	ulong start, now, last;
-
-	if (s_first < 0 || s_first > s_last) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("Can't erase unknown flash type %08lx - aborted\n",
-			info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-	l_sect = -1;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	out8(addr + 0x555, 0xAA);
-	iobarrier_rw();
-	out8(addr + 0x2AA, 0x55);
-	iobarrier_rw();
-	out8(addr + 0x555, 0x80);
-	iobarrier_rw();
-	out8(addr + 0x555, 0xAA);
-	iobarrier_rw();
-	out8(addr + 0x2AA, 0x55);
-	iobarrier_rw();
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect<=s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			addr = info->start[sect];
-			out8(addr, 0x30);
-			iobarrier_rw();
-			l_sect = sect;
-		}
-	}
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* wait at least 80us - let's wait 1 ms */
-	udelay (1000);
-
-	/*
-	 * We wait for the last triggered sector
-	 */
-	if (l_sect < 0)
-		goto DONE;
-
-	start = get_timer (0);
-	last  = start;
-	addr = info->start[l_sect];
-
-	DEBUGF ("Start erase timeout: %d\n", CONFIG_SYS_FLASH_ERASE_TOUT);
-
-	while ((in8(addr) & 0x80) != 0x80) {
-		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-			printf ("Timeout\n");
-			flash_reset (info->start[0]);
-			return 1;
-		}
-		/* show that we're waiting */
-		if ((now - last) > 1000) {	/* every second */
-			putc ('.');
-			last = now;
-		}
-		iobarrier_rw();
-	}
-
-DONE:
-	/* reset to read mode */
-	flash_reset (info->start[0]);
-
-	printf (" done\n");
-	return 0;
-}
-
-/*
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	ulong cp, wp, data;
-	int i, l, rc;
-
-	wp = (addr & ~3);	/* get lower word aligned address */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i=0, cp=wp; i<l; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-		}
-		for (; i<4 && cnt>0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-		for (; cnt==0 && i<4; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-		}
-
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 4;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= 4) {
-		data = 0;
-		for (i=0; i<4; ++i) {
-			data = (data << 8) | *src++;
-		}
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp  += 4;
-		cnt -= 4;
-	}
-
-	if (cnt == 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i<4; ++i, ++cp) {
-		data = (data << 8) | (*(uchar *)cp);
-	}
-
-	return (write_word(info, wp, data));
-}
-
-/*
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
-	volatile ulong addr = info->start[0];
-	ulong start;
-	int i;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((in32(dest) & data) != data) {
-		return (2);
-	}
-
-	/* write each byte out */
-	for (i = 0; i < 4; i++) {
-		char *data_ch = (char *)&data;
-		int flag = disable_interrupts();
-
-		out8(addr + 0x555, 0xAA);
-		iobarrier_rw();
-		out8(addr + 0x2AA, 0x55);
-		iobarrier_rw();
-		out8(addr + 0x555, 0xA0);
-		iobarrier_rw();
-		out8(dest+i, data_ch[i]);
-		iobarrier_rw();
-
-		/* re-enable interrupts if necessary */
-		if (flag)
-			enable_interrupts();
-
-		/* data polling for D7 */
-		start = get_timer (0);
-		while ((in8(dest+i) & 0x80) != (data_ch[i] & 0x80)) {
-			if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-				flash_reset (addr);
-				return (1);
-			}
-			iobarrier_rw();
-		}
-	}
-
-	flash_reset (addr);
-	return (0);
-}
-
-/*
- * Reset bank to read mode
- */
-static void flash_reset (ulong addr)
-{
-	out8(addr, 0xF0);	/* reset bank */
-	iobarrier_rw();
-}
-
-void flash_print_info (flash_info_t *info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:	printf ("AMD ");		break;
-	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
-	case FLASH_MAN_BM:	printf ("BRIGHT MICRO ");	break;
-	case FLASH_MAN_STM:	printf ("SGS THOMSON ");	break;
-	default:		printf ("Unknown Vendor ");	break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AM040:	printf ("29F040 or 29LV040 (4 Mbit, uniform sectors)\n");
-				break;
-	case FLASH_AM400B:	printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM400T:	printf ("AM29LV400T (4 Mbit, top boot sector)\n");
-				break;
-	case FLASH_AM800B:	printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM800T:	printf ("AM29LV800T (8 Mbit, top boot sector)\n");
-				break;
-	case FLASH_AM160B:	printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM160T:	printf ("AM29LV160T (16 Mbit, top boot sector)\n");
-				break;
-	case FLASH_AM320B:	printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM320T:	printf ("AM29LV320T (32 Mbit, top boot sector)\n");
-				break;
-	default:		printf ("Unknown Chip Type\n");
-				break;
-	}
-
-	if (info->size % 0x100000 == 0) {
-		printf ("  Size: %ld MB in %d Sectors\n",
-			info->size / 0x100000, info->sector_count);
-	} else if (info->size % 0x400 == 0) {
-		printf ("  Size: %ld KB in %d Sectors\n",
-		        info->size / 0x400, info->sector_count);
-	} else {
-		printf ("  Size: %ld B in %d Sectors\n",
-		        info->size, info->sector_count);
-	}
-
-	printf ("  Sector Start Addresses:");
-	for (i=0; i<info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf ("\n   ");
-		printf (" %08lX%s",
-			info->start[i],
-			info->protect[i] ? " (RO)" : "     "
-		);
-	}
-	printf ("\n");
-}
diff --git a/board/pcippc2/fpga_serial.c b/board/pcippc2/fpga_serial.c
deleted file mode 100644
index de61ca0..0000000
--- a/board/pcippc2/fpga_serial.c
+++ /dev/null
@@ -1,125 +0,0 @@ 
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <common.h>
-#include <asm/io.h>
-
-#include "fpga_serial.h"
-#include "hardware.h"
-#include "pcippc2.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-  /* 8 data, 1 stop, no parity
-   */
-#define LCRVAL		0x03
-  /* RTS/DTR
-   */
-#define MCRVAL		0x03
-  /* Clear & enable FIFOs
-   */
-#define FCRVAL		0x07
-
-static void fpga_serial_wait (void);
-static void fpga_serial_print (char c);
-
-void fpga_serial_init (int baudrate)
-{
-	int clock_divisor = 115200 / baudrate;
-
-	out8 (FPGA (INT, SERIAL_CONFIG), 0x24);
-	iobarrier_rw ();
-
-	fpga_serial_wait ();
-
-	out8 (UART (IER), 0);
-	out8 (UART (LCR), LCRVAL | 0x80);
-	iobarrier_rw ();
-	out8 (UART (DLL), clock_divisor & 0xff);
-	out8 (UART (DLM), clock_divisor >> 8);
-	iobarrier_rw ();
-	out8 (UART (LCR), LCRVAL);
-	iobarrier_rw ();
-	out8 (UART (MCR), MCRVAL);
-	out8 (UART (FCR), FCRVAL);
-	iobarrier_rw ();
-}
-
-void fpga_serial_putc (char c)
-{
-	if (c) {
-		fpga_serial_print (c);
-	}
-}
-
-int fpga_serial_getc (void)
-{
-	while ((in8 (UART (LSR)) & 0x01) == 0);
-
-	return in8 (UART (RBR));
-}
-
-int fpga_serial_tstc (void)
-{
-	return (in8 (UART (LSR)) & 0x01) != 0;
-}
-
-void fpga_serial_setbrg (void)
-{
-	int clock_divisor = 115200 / gd->baudrate;
-
-	fpga_serial_wait ();
-
-	out8 (UART (LCR), LCRVAL | 0x80);
-	iobarrier_rw ();
-	out8 (UART (DLL), clock_divisor & 0xff);
-	out8 (UART (DLM), clock_divisor >> 8);
-	iobarrier_rw ();
-	out8 (UART (LCR), LCRVAL);
-	iobarrier_rw ();
-}
-
-static void fpga_serial_wait (void)
-{
-	while ((in8 (UART (LSR)) & 0x40) == 0);
-}
-
-static void fpga_serial_print (char c)
-{
-	if (c == '\n') {
-		while ((in8 (UART (LSR)) & 0x20) == 0);
-
-		out8 (UART (THR), '\r');
-		iobarrier_rw ();
-	}
-
-	while ((in8 (UART (LSR)) & 0x20) == 0);
-
-	out8 (UART (THR), c);
-	iobarrier_rw ();
-
-	if (c == '\n') {
-		fpga_serial_wait ();
-	}
-}
diff --git a/board/pcippc2/fpga_serial.h b/board/pcippc2/fpga_serial.h
deleted file mode 100644
index 106fbf7..0000000
--- a/board/pcippc2/fpga_serial.h
+++ /dev/null
@@ -1,33 +0,0 @@ 
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _FPGA_SERIAL_H_
-#define _FPGA_SERIAL_H_
-
-extern void	fpga_serial_init	(int);
-extern void	fpga_serial_putc	(char);
-extern int	fpga_serial_getc	(void);
-extern int	fpga_serial_tstc	(void);
-extern void	fpga_serial_setbrg	(void);
-
-#endif
diff --git a/board/pcippc2/hardware.h b/board/pcippc2/hardware.h
deleted file mode 100644
index 489929d..0000000
--- a/board/pcippc2/hardware.h
+++ /dev/null
@@ -1,48 +0,0 @@ 
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _HARDWARE_H_
-#define _HARDWARE_H_
-
-#include "cpc710.h"
-#include "cpc710_pci.h"
-#include "pcippc2_fpga.h"
-#include "ns16550.h"
-
-#define REG(r, x)	(HW_PHYS_##r + HW_##r##_##x)
-
-  /* Address map:
-   *
-   * 0x00000000-0x20000000	SDRAM
-   * 0x40000000-0x00008000	Init RAM in the CPU DCache
-   * 0xf0000000-0xf8000000	CPCI MEM
-   * 0xf8000000-0xfc000000	Local PCI MEM
-   * 0xfc000000-0xfe000000	CPCI I/O
-   * 0xfe000000-0xff000000	Local PCI I/O
-   * 0xff000000-0xff201000	System configuration space
-   * 0xff400000-0xff500000	Local PCI bridge space
-   * 0xff500000-0xff600000	CPCI bridge space
-   * 0xfff00000-0xfff80000	Boot Flash
-   */
-
-#endif
diff --git a/board/pcippc2/i2c.c b/board/pcippc2/i2c.c
deleted file mode 100644
index ab52562..0000000
--- a/board/pcippc2/i2c.c
+++ /dev/null
@@ -1,257 +0,0 @@ 
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <common.h>
-#include <asm/io.h>
-
-#include "hardware.h"
-#include "i2c.h"
-
-static void		i2c_start	(void);
-static void		i2c_stop	(void);
-static int		i2c_write	(u8		data);
-static void		i2c_read	(u8 *		data);
-
-static inline void	i2c_port_start  (void);
-static inline void	i2c_clock	(unsigned int	val);
-static inline void	i2c_data	(unsigned int	val);
-static inline unsigned int
-			i2c_in		(void);
-static inline void	i2c_write_bit	(unsigned int	val);
-static inline unsigned int
-			i2c_read_bit	(void);
-
-static inline void	i2c_udelay	(unsigned int	time);
-
-int i2c_read_byte (
-  u8 *			data,
-  u8			dev,
-  u8			offset)
-{
-  int			err = 0;
-
-  i2c_start();
-
-  err = ! i2c_write(dev);
-
-  if (! err)
-  {
-    err = ! i2c_write(offset);
-  }
-
-  if (! err)
-  {
-    i2c_start();
-  }
-
-  if (! err)
-  {
-    err = ! i2c_write(dev | 0x01);
-  }
-
-  if (! err)
-  {
-    i2c_read(data);
-  }
-
-  i2c_stop();
-
-  return ! err;
-}
-
-static inline void i2c_udelay (
-  unsigned int		time)
-{
-  int			v;
-
-  asm volatile("mtdec %0" : : "r" (time * ((CONFIG_SYS_BUS_CLK / 4) / 1000000)));
-
-  do
-  {
-    asm volatile("isync; mfdec %0" : "=r" (v));
-  } while (v >= 0);
-}
-
-  /* Low-level hardware access
-   */
-
-#define BIT_GPDATA		0x80000000
-#define BIT_GPCLK		0x40000000
-
-static inline void i2c_port_start (void)
-{
-  out32(REG(CPC0, GPDIR), in32(REG(CPC0, GPDIR)) & ~(BIT_GPCLK | BIT_GPDATA));
-  out32(REG(CPC0, GPOUT), in32(REG(CPC0, GPOUT)) & ~(BIT_GPCLK | BIT_GPDATA));
-  iobarrier_rw();
-
-  i2c_udelay(1);
-}
-
-static inline void i2c_clock (
-  unsigned int		val)
-{
-  if (val)
-  {
-    out32(REG(CPC0, GPDIR), in32(REG(CPC0, GPDIR)) & ~BIT_GPCLK);
-  }
-  else
-  {
-    out32(REG(CPC0, GPDIR), in32(REG(CPC0, GPDIR)) | BIT_GPCLK);
-  }
-
-  iobarrier_rw();
-
-  i2c_udelay(1);
-}
-
-static inline void i2c_data (
-  unsigned int		val)
-{
-  if (val)
-  {
-    out32(REG(CPC0, GPDIR), in32(REG(CPC0, GPDIR)) & ~BIT_GPDATA);
-  }
-  else
-  {
-    out32(REG(CPC0, GPDIR), in32(REG(CPC0, GPDIR)) | BIT_GPDATA);
-  }
-
-  iobarrier_rw();
-
-  i2c_udelay(1);
-}
-
-static inline unsigned int i2c_in (void)
-{
-  unsigned int		val = ((in32(REG(CPC0, GPIN)) & BIT_GPDATA) != 0)?1:0;
-
-  iobarrier_rw();
-
-  return val;
-}
-
-
-  /* Protocol implementation
-   */
-
-static inline void i2c_write_bit (
-  unsigned int		val)
-{
-  i2c_data(val);
-  i2c_udelay(10);
-  i2c_clock(1);
-  i2c_udelay(10);
-  i2c_clock(0);
-  i2c_udelay(10);
-}
-
-static inline unsigned int i2c_read_bit (void)
-{
-  unsigned int		val;
-
-  i2c_data(1);
-  i2c_udelay(10);
-
-  i2c_clock(1);
-  i2c_udelay(10);
-
-  val = i2c_in();
-
-  i2c_clock(0);
-  i2c_udelay(10);
-
-  return val;
-}
-
-unsigned int i2c_reset (void)
-{
-  unsigned int		val;
-  int i;
-
-  i2c_port_start();
-
-  i=0;
-  do {
-    i2c_udelay(10);
-    i2c_clock(0);
-    i2c_udelay(10);
-    i2c_clock(1);
-    i2c_udelay(10);
-    val = i2c_in();
-    i++;
-  }  while ((i<9)&&(val==0));
-  return (val);
-}
-
-
-static void i2c_start (void)
-{
-  i2c_data(1);
-  i2c_clock(1);
-  i2c_udelay(10);
-  i2c_data(0);
-  i2c_udelay(10);
-  i2c_clock(0);
-  i2c_udelay(10);
-}
-
-static void i2c_stop (void)
-{
-  i2c_data(0);
-  i2c_udelay(10);
-  i2c_clock(1);
-  i2c_udelay(10);
-  i2c_data(1);
-  i2c_udelay(10);
-}
-
-static int i2c_write (
-  u8			data)
-{
-  unsigned int		i;
-
-  for (i = 0; i < 8; i++)
-  {
-    i2c_write_bit(data >> 7);
-    data <<= 1;
-  }
-
-  return i2c_read_bit() == 0;
-}
-
-static void i2c_read (
-  u8 *			data)
-{
-  unsigned int		i;
-  u8			val = 0;
-
-  for (i = 0; i < 8; i++)
-  {
-    val <<= 1;
-    val |= i2c_read_bit();
-  }
-
-  *data = val;
-  i2c_write_bit(1); /* NoAck */
-}
diff --git a/board/pcippc2/i2c.h b/board/pcippc2/i2c.h
deleted file mode 100644
index 1224b42..0000000
--- a/board/pcippc2/i2c.h
+++ /dev/null
@@ -1,36 +0,0 @@ 
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _I2C_H_
-#define _I2C_H_
-
-#include <common.h>
-
-extern int	i2c_read_byte	(u8 *		data,
-				 u8		dev,
-				 u8 offset);
-
-extern unsigned int i2c_reset (void);
-
-
-#endif
diff --git a/board/pcippc2/ns16550.h b/board/pcippc2/ns16550.h
deleted file mode 100644
index 7023f13..0000000
--- a/board/pcippc2/ns16550.h
+++ /dev/null
@@ -1,41 +0,0 @@ 
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _NS16550_H_
-#define _NS16550_H_
-
-#define NS16550_RBR	0x00
-#define NS16550_IER	0x01
-#define NS16550_FCR	0x02
-#define NS16550_LCR	0x03
-#define NS16550_MCR	0x04
-#define NS16550_LSR	0x05
-#define NS16550_MSR	0x06
-#define NS16550_SCR	0x07
-
-#define NS16550_THR	NS16550_RBR
-#define NS16550_IIR	NS16550_FCR
-#define NS16550_DLL	NS16550_RBR
-#define NS16550_DLM	NS16550_IER
-
-#endif
diff --git a/board/pcippc2/pcippc2.c b/board/pcippc2/pcippc2.c
deleted file mode 100644
index 5e6fc58..0000000
--- a/board/pcippc2/pcippc2.c
+++ /dev/null
@@ -1,253 +0,0 @@ 
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <common.h>
-#include <command.h>
-#include <asm/io.h>
-#include <linux/mtd/doc2000.h>
-#include <watchdog.h>
-#include <pci.h>
-#include <netdev.h>
-#include <serial.h>
-
-#include "hardware.h"
-#include "pcippc2.h"
-#include "sconsole.h"
-#include "fpga_serial.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_WATCHDOG)
-
-static int pcippc2_wdt_init_done = 0;
-
-void pcippc2_wdt_init (void);
-
-#endif
-
-  /* Check board identity
-   */
-int checkboard (void)
-{
-#ifdef CONFIG_PCIPPC2
-	puts ("Board: Gespac PCIPPC-2\n");
-#else
-	puts ("Board: Gespac PCIPPC-6\n");
-#endif
-	return 0;
-}
-
-  /* RAM size is stored in CPC0_RGBAN1
-   */
-u32 pcippc2_sdram_size (void)
-{
-	return in32 (REG (CPC0, RGBAN1));
-}
-
-phys_size_t initdram (int board_type)
-{
-	return cpc710_ram_init ();
-}
-
-int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	out32 (REG (CPC0, SPOR), 0);
-	iobarrier_rw ();
-	while (1);
-	/* notreached */
-	return (-1);
-}
-
-int board_early_init_f (void)
-{
-	out32 (REG (CPC0, RSTR), 0xC0000000);
-	iobarrier_rw ();
-
-	out32 (REG (CPC0, RSTR), 0xF0000000);
-	iobarrier_rw ();
-
-	out32 (REG (CPC0, UCTL), 0x00F80000);
-
-	out32 (REG (CPC0, SIOC0), 0x30000000);
-
-	out32 (REG (CPC0, ABCNTL), 0x00000000);
-
-	out32 (REG (CPC0, SESR), 0x00000000);
-	out32 (REG (CPC0, SEAR), 0x00000000);
-
-	/* Detect IBM Avignon CPC710 Revision */
-	if ((in32 (REG (CPC0, UCTL)) & 0x000000F0) == CPC710_TYPE_100P)
-		out32 (REG (CPC0, PGCHP), 0xA0000040);
-	else
-		out32 (REG (CPC0, PGCHP), 0x80800040);
-
-
-	out32 (REG (CPC0, ATAS), 0x709C2508);
-
-	iobarrier_rw ();
-
-	return 0;
-}
-
-void after_reloc (ulong dest_addr)
-{
-	/* Jump to the main U-Boot board init code
-	 */
-	board_init_r ((gd_t *)gd, dest_addr);
-}
-
-int misc_init_r (void)
-{
-	pcippc2_fpga_init ();
-
-	pcippc2_cpci3264_init ();
-
-#if defined(CONFIG_WATCHDOG)
-	pcippc2_wdt_init ();
-#endif
-
-	fpga_serial_init (sconsole_get_baudrate ());
-
-	sconsole_putc   = fpga_serial_putc;
-	sconsole_puts   = default_serial_puts;
-	sconsole_getc   = fpga_serial_getc;
-	sconsole_tstc   = fpga_serial_tstc;
-	sconsole_setbrg = fpga_serial_setbrg;
-
-	sconsole_flush ();
-	return (0);
-}
-
-void pci_init_board (void)
-{
-	cpc710_pci_init ();
-
-	/* FPGA requires no retry timeouts to be enabled
-	 */
-	cpc710_pci_enable_timeout ();
-}
-
-#ifdef CONFIG_CMD_DOC
-void doc_init (void)
-{
-	doc_probe (pcippc2_fpga1_phys + HW_FPGA1_DOC);
-}
-#endif
-
-void pcippc2_cpci3264_init (void)
-{
-  pci_dev_t		bdf = pci_find_device(FPGA_VENDOR_ID, FPGA_DEVICE_ID, 0);
-
-  if (bdf == -1)
-  {
-    puts("Unable to find FPGA !\n");
-    hang();
-  }
-
-	if((in32(pcippc2_fpga0_phys + HW_FPGA0_BOARD) & 0x01000000) == 0x01000000)
-	/* 32-bits Compact PCI bus - LSB bit */
-	{
-		iobarrier_rw();
-		out32(BRIDGE(CPCI, PCIDG), 0x40000000);	/* 32-bits bridge, Pipeline */
-		iobarrier_rw();
-	}
-}
-
-#if defined(CONFIG_WATCHDOG)
-
-void pcippc2_wdt_init (void)
-{
-	out16r (FPGA (WDT, PROG), 0xffff);
-	out8 (FPGA (WDT, CTRL), 0x1);
-
-	pcippc2_wdt_init_done = 1;
-}
-
-void pcippc2_wdt_done (void)
-{
-	out8 (FPGA (WDT, CTRL), 0x0);
-
-	pcippc2_wdt_init_done = 0;
-}
-
-void pcippc2_wdt_reset (void)
-{
-	if (pcippc2_wdt_init_done == 1)
-		out8 (FPGA (WDT, REFRESH), 0x56);
-}
-
-void watchdog_reset (void)
-{
-	int re_enable = disable_interrupts ();
-
-	pcippc2_wdt_reset ();
-	if (re_enable)
-		enable_interrupts ();
-}
-
-#if defined(CONFIG_CMD_BSP)
-int do_wd (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	switch (argc) {
-	case 1:
-		printf ("Watchdog timer status is %s\n",
-			pcippc2_wdt_init_done == 1 ? "on" : "off");
-
-		return 0;
-	case 2:
-		if (!strcmp(argv[1],"on")) {
-			pcippc2_wdt_init();
-			printf("Watchdog timer now is on\n");
-
-			return 0;
-
-		} else if (!strcmp(argv[1],"off")) {
-			pcippc2_wdt_done();
-			printf("Watchdog timer now is off\n");
-
-			return 0;
-
-		} else
-			break;
-	default:
-		break;
-	}
-	return cmd_usage(cmdtp);
-}
-
-U_BOOT_CMD(
-	wd,	2,	1,	do_wd,
-	"check and set watchdog",
-	"on   - switch watchDog on\n"
-	"wd off  - switch watchdog off\n"
-	"wd      - print current status"
-);
-
-#endif
-#endif	/* CONFIG_WATCHDOG */
-
-int board_eth_init(bd_t *bis)
-{
-	return pci_eth_init(bis);
-}
diff --git a/board/pcippc2/pcippc2.h b/board/pcippc2/pcippc2.h
deleted file mode 100644
index a1366ef..0000000
--- a/board/pcippc2/pcippc2.h
+++ /dev/null
@@ -1,51 +0,0 @@ 
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _PCIPPC2_H_
-#define _PCIPPC2_H_
-
-#include <config.h>
-#include <common.h>
-
-#include "hardware.h"
-
-#define FPGA(r, p)	(pcippc2_fpga0_phys + HW_FPGA0_##r##_##p)
-#define UART(r)		(pcippc2_fpga0_phys + HW_FPGA0_UART1 + NS16550_##r * 4)
-#define RTC(r)		(pcippc2_fpga1_phys + HW_FPGA1_RTC + r)
-
-extern u32		pcippc2_fpga0_phys;
-extern u32		pcippc2_fpga1_phys;
-
-extern u32	pcippc2_sdram_size		(void);
-
-extern void	pcippc2_fpga_init		(void);
-
-extern void	pcippc2_cpci3264_init	(void);
-
-extern void	cpc710_pci_init			(void);
-extern void	cpc710_pci_enable_timeout	(void);
-
-extern unsigned long
-		cpc710_ram_init			(void);
-
-#endif
diff --git a/board/pcippc2/pcippc2_fpga.c b/board/pcippc2/pcippc2_fpga.c
deleted file mode 100644
index 7f6739d..0000000
--- a/board/pcippc2/pcippc2_fpga.c
+++ /dev/null
@@ -1,87 +0,0 @@ 
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <common.h>
-#include <asm/io.h>
-
-#include "pci.h"
-
-#include "hardware.h"
-#include "pcippc2.h"
-
-u32		pcippc2_fpga0_phys;
-u32		pcippc2_fpga1_phys;
-
-void pcippc2_fpga_init (void)
-{
-  pci_dev_t		bdf = pci_find_device(FPGA_VENDOR_ID, FPGA_DEVICE_ID, 0);
-  unsigned int		addr;
-  u16			cmd;
-
-  if (bdf == -1)
-  {
-    puts("Unable to find FPGA !\n");
-    hang();
-  }
-
-  pci_read_config_word(bdf, PCI_COMMAND, &cmd);
-  if ((cmd & (PCI_COMMAND_MEMORY | PCI_COMMAND_IO)) != (PCI_COMMAND_MEMORY | PCI_COMMAND_IO))
-  {
-    puts("FPGA is not configured !\n");
-    hang();
-  }
-
-  pci_read_config_dword(bdf, PCI_BASE_ADDRESS_0, &addr);
-  if (addr & 0x1)
-  {
-      /* IO space
-       */
-    pcippc2_fpga0_phys = pci_io_to_phys(bdf, addr & 0xfffffffc);
-  }
-  else
-  {
-      /* Memory space
-       */
-    pcippc2_fpga0_phys = pci_mem_to_phys(bdf, addr & 0xfffffff0);
-  }
-
-  pci_read_config_dword(bdf, PCI_BASE_ADDRESS_1, &addr);
-  if (addr & 0x1)
-  {
-      /* IO space
-       */
-    pcippc2_fpga1_phys = pci_io_to_phys(bdf, addr & 0xfffffffc);
-  }
-  else
-  {
-      /* Memory space
-       */
-    pcippc2_fpga1_phys = pci_mem_to_phys(bdf, addr & 0xfffffff0);
-  }
-
-    /* Interrupts are not used
-     */
-  out32(FPGA(INT, INTR_MASK), 0xffffffff);
-  iobarrier_rw();
-}
diff --git a/board/pcippc2/pcippc2_fpga.h b/board/pcippc2/pcippc2_fpga.h
deleted file mode 100644
index 850c331..0000000
--- a/board/pcippc2/pcippc2_fpga.h
+++ /dev/null
@@ -1,49 +0,0 @@ 
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _PCIPPC2_FPGA_H_
-#define _PCIPPC2_FPGA_H_
-
-#define FPGA_VENDOR_ID			0x1310
-#define FPGA_DEVICE_ID			0x000d
-
-#define HW_FPGA0_INT			0x0000
-#define HW_FPGA0_BOARD		0x0060
-#define HW_FPGA0_UART1			0x0080
-#define HW_FPGA0_UART2			0x0100
-#define HW_FPGA0_RTC			0x2000
-#define HW_FPGA0_DOC			0x4000
-#define HW_FPGA1_RTC			0x0000
-#define HW_FPGA1_DOC			0x4000
-
-#define HW_FPGA0_INT_INTR_MASK		0x30
-#define HW_FPGA0_INT_INTR_STATUS	0x34
-#define HW_FPGA0_INT_INTR_EOI		0x40
-#define HW_FPGA0_INT_SERIAL_CONFIG	0x5c
-
-#define HW_FPGA0_WDT_CTRL		0x44
-#define HW_FPGA0_WDT_PROG		0x48
-#define HW_FPGA0_WDT_VAL		0x4c
-#define HW_FPGA0_WDT_REFRESH		0x50
-
-#endif
diff --git a/board/pcippc2/sconsole.c b/board/pcippc2/sconsole.c
deleted file mode 100644
index aa3c908..0000000
--- a/board/pcippc2/sconsole.c
+++ /dev/null
@@ -1,162 +0,0 @@ 
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <common.h>
-#include <serial.h>
-#include <linux/compiler.h>
-
-#include "sconsole.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void	(*sconsole_putc) (char) = 0;
-void	(*sconsole_puts) (const char *) = 0;
-int	(*sconsole_getc) (void) = 0;
-int	(*sconsole_tstc) (void) = 0;
-void	(*sconsole_setbrg) (void) = 0;
-
-static int sconsole_serial_init(void)
-{
-	sconsole_buffer_t *sb = SCONSOLE_BUFFER;
-
-	sb->pos  = 0;
-	sb->size = 0;
-	sb->baud = gd->baudrate;
-	sb->max_size = CONFIG_SYS_SCONSOLE_SIZE - sizeof (sconsole_buffer_t);
-
-	return (0);
-}
-
-static void sconsole_serial_putc(char c)
-{
-	if (sconsole_putc) {
-		(*sconsole_putc) (c);
-	} else {
-		sconsole_buffer_t *sb = SCONSOLE_BUFFER;
-
-		if (c) {
-			sb->data[sb->pos++] = c;
-			if (sb->pos == sb->max_size) {
-				sb->pos = 0;
-			}
-			if (sb->size < sb->max_size) {
-				sb->size++;
-			}
-		}
-	}
-}
-
-static void sconsole_serial_puts(const char *s)
-{
-	if (sconsole_puts) {
-		(*sconsole_puts) (s);
-	} else {
-		sconsole_buffer_t *sb = SCONSOLE_BUFFER;
-
-		while (*s) {
-			sb->data[sb->pos++] = *s++;
-			if (sb->pos == sb->max_size) {
-				sb->pos = 0;
-			}
-			if (sb->size < sb->max_size) {
-				sb->size++;
-			}
-		}
-	}
-}
-
-static int sconsole_serial_getc(void)
-{
-	if (sconsole_getc) {
-		return (*sconsole_getc) ();
-	} else {
-		return 0;
-	}
-}
-
-static int sconsole_serial_tstc(void)
-{
-	if (sconsole_tstc) {
-		return (*sconsole_tstc) ();
-	} else {
-		return 0;
-	}
-}
-
-static void sconsole_serial_setbrg(void)
-{
-	if (sconsole_setbrg) {
-		(*sconsole_setbrg) ();
-	} else {
-		sconsole_buffer_t *sb = SCONSOLE_BUFFER;
-
-		sb->baud = gd->baudrate;
-	}
-}
-
-static struct serial_device sconsole_serial_drv = {
-	.name	= "sconsole_serial",
-	.start	= sconsole_serial_init,
-	.stop	= NULL,
-	.setbrg	= sconsole_serial_setbrg,
-	.putc	= sconsole_serial_putc,
-	.puts	= sconsole_serial_puts,
-	.getc	= sconsole_serial_getc,
-	.tstc	= sconsole_serial_tstc,
-};
-
-void sconsole_serial_initialize(void)
-{
-	serial_register(&sconsole_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
-	return &sconsole_serial_drv;
-}
-
-int sconsole_get_baudrate (void)
-{
-	sconsole_buffer_t *sb = SCONSOLE_BUFFER;
-
-	return sb->baud;
-}
-
-void sconsole_flush (void)
-{
-	if (sconsole_putc) {
-		sconsole_buffer_t *sb = SCONSOLE_BUFFER;
-		unsigned int end = sb->pos < sb->size
-				? sb->pos + sb->max_size - sb->size
-				: sb->pos - sb->size;
-
-		while (sb->size) {
-			(*sconsole_putc) (sb->data[end++]);
-			if (end == sb->max_size) {
-				end = 0;
-			}
-			sb->size--;
-		}
-	}
-}
diff --git a/board/pcippc2/sconsole.h b/board/pcippc2/sconsole.h
deleted file mode 100644
index ff0ccab..0000000
--- a/board/pcippc2/sconsole.h
+++ /dev/null
@@ -1,48 +0,0 @@ 
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _SCONSOLE_H_
-#define _SCONSOLE_H_
-
-#include <config.h>
-
-typedef struct sconsole_buffer_s {
-	unsigned long size;
-	unsigned long max_size;
-	unsigned long pos;
-	unsigned long baud;
-	char data[1];
-} sconsole_buffer_t;
-
-#define SCONSOLE_BUFFER		((sconsole_buffer_t *) CONFIG_SYS_SCONSOLE_ADDR)
-
-extern void	(* sconsole_putc)	(char);
-extern void	(* sconsole_puts)	(const char *);
-extern int	(* sconsole_getc)	(void);
-extern int	(* sconsole_tstc)	(void);
-extern void	(* sconsole_setbrg)	(void);
-
-extern void	sconsole_flush		(void);
-extern int	sconsole_get_baudrate	(void);
-
-#endif
diff --git a/boards.cfg b/boards.cfg
index 318301a..fc09934 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -459,8 +459,6 @@  openrisc-generic             openrisc    or1200      openrisc-generic    openris
 EVB64260                     powerpc     74xx_7xx    evb64260            -              -           EVB64260
 EVB64260_750CX               powerpc     74xx_7xx    evb64260            -              -           EVB64260
 P3G4                         powerpc     74xx_7xx    evb64260
-PCIPPC2                      powerpc     74xx_7xx    pcippc2
-PCIPPC6                      powerpc     74xx_7xx    pcippc2
 ppmc7xx                      powerpc     74xx_7xx
 ZUMA                         powerpc     74xx_7xx    evb64260
 ELPPC                        powerpc     74xx_7xx    elppc               eltec
diff --git a/doc/driver-model/UDM-pci.txt b/doc/driver-model/UDM-pci.txt
index b65e9ea..c2cf2d5 100644
--- a/doc/driver-model/UDM-pci.txt
+++ b/doc/driver-model/UDM-pci.txt
@@ -240,10 +240,6 @@  III) Analysis of in-tree drivers
     ----------------
       Standard driver, uses indirect functions.
 
-    8) pcippc2/cpc710_pci.c
-    -----------------------
-      Standard driver, uses indirect functions, has two busses.
-
     9) Marvell/db64360/pci.c
     ------------------------
       Standard driver, uses dword for read/write ops, has two busses.
diff --git a/doc/driver-model/UDM-watchdog.txt b/doc/driver-model/UDM-watchdog.txt
index 271bd26..7db3286 100644
--- a/doc/driver-model/UDM-watchdog.txt
+++ b/doc/driver-model/UDM-watchdog.txt
@@ -292,11 +292,6 @@  III) Analysis of in-tree drivers
   Only function proxy call. Code cleanup needed.
 
 
-  45) board/pcippc2/pcippc2.c
-  ---------------------------
-  The driver is standard HW watchdog. Simple conversion is possible.
-
-
   46) board/pcs440ep/pcs440ep.c
   -----------------------------
   The driver is standard HW watchdog. Simple conversion is possible.
diff --git a/drivers/rtc/mk48t59.c b/drivers/rtc/mk48t59.c
index e285823..3af2623 100644
--- a/drivers/rtc/mk48t59.c
+++ b/drivers/rtc/mk48t59.c
@@ -49,20 +49,6 @@  static void rtc_write (short reg, uchar val)
 	out8(RTC_PORT_DATA, val);
 }
 
-#elif defined(CONFIG_PCIPPC2)
-
-#include "../board/pcippc2/pcippc2.h"
-
-static uchar rtc_read (short reg)
-{
-	return in8(RTC(reg));
-}
-
-static void rtc_write (short reg, uchar val)
-{
-	out8(RTC(reg),val);
-}
-
 #elif defined(CONFIG_EVAL5200)
 
 static uchar rtc_read (short reg)
diff --git a/include/configs/PCIPPC2.h b/include/configs/PCIPPC2.h
deleted file mode 100644
index 90cee88..0000000
--- a/include/configs/PCIPPC2.h
+++ /dev/null
@@ -1,251 +0,0 @@ 
-/*
- * (C) Copyright 2002-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- *
- * Configuration settings for the PCIPPC-2 board.
- *
- */
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_PCIPPC2		1	/* this is a PCIPPC2 board	*/
-
-#define	CONFIG_SYS_TEXT_BASE	0xfff00000
-
-#define CONFIG_BOARD_EARLY_INIT_F 1
-#define CONFIG_MISC_INIT_R	1
-
-#define CONFIG_CONS_INDEX	1
-#define CONFIG_BAUDRATE		9600
-
-#define CONFIG_PREBOOT		""
-#define CONFIG_BOOTDELAY	5
-
-#ifndef __ASSEMBLY__
-#include <galileo/core.h>
-#endif
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_BSP
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_SNTP
-
-#define CONFIG_PCI		1
-#define CONFIG_PCI_PNP		1	/* PCI plug-and-play */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
-
-#define	CONFIG_SYS_HUSH_PARSER		1	/* use "hush" command parser	*/
-#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
-
-/* Print Buffer Size
- */
-#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-
-#define	CONFIG_SYS_MAXARGS	64		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CONFIG_SYS_LOAD_ADDR	0x00100000	/* Default load address		*/
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE	    0x00000000
-#define CONFIG_SYS_FLASH_BASE	    0xFFF00000
-#define CONFIG_SYS_FLASH_MAX_SIZE  0x00100000
-/* Maximum amount of RAM.
- */
-#define CONFIG_SYS_MAX_RAM_SIZE    0x20000000  /* 512Mb			*/
-
-#define CONFIG_SYS_RESET_ADDRESS   0xFFF00100
-
-#define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_TEXT_BASE
-
-#define CONFIG_SYS_MONITOR_LEN	    (256 << 10) /* Reserve 256 kB for Monitor	*/
-#define CONFIG_SYS_MALLOC_LEN	    (128 << 10) /* Reserve 128 kB for malloc()	*/
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_SDRAM_BASE && \
-    CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_MAX_RAM_SIZE
-#define CONFIG_SYS_RAMBOOT
-#else
-#undef CONFIG_SYS_RAMBOOT
-#endif
-
-#define CONFIG_SYS_MEMTEST_START   0x00004000	/* memtest works on		*/
-#define CONFIG_SYS_MEMTEST_END	    0x02000000	/* 0 ... 32 MB in DRAM		*/
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area
- */
-
-#define CONFIG_SYS_INIT_RAM_ADDR     0x40000000
-#define CONFIG_SYS_INIT_RAM_SIZE      0x8000
-#define CONFIG_SYS_GBL_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET    CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_INIT_RAM_LOCK
-
-/*
- * Temporary buffer for serial data until the real serial driver
- * is initialised (memtest will destroy this buffer)
- */
-#define CONFIG_SYS_SCONSOLE_ADDR     CONFIG_SYS_INIT_RAM_ADDR
-#define CONFIG_SYS_SCONSOLE_SIZE     0x0002000
-
-/* SDRAM 0 - 256MB
- */
-#define CONFIG_SYS_DBAT0L	      (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_DBAT0U	      (CONFIG_SYS_SDRAM_BASE | \
-			       BATU_BL_256M | BATU_VS | BATU_VP)
-/* SDRAM 1 - 256MB
- */
-#define CONFIG_SYS_DBAT1L	      ((CONFIG_SYS_SDRAM_BASE + 0x10000000) | \
-			       BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_DBAT1U	      ((CONFIG_SYS_SDRAM_BASE + 0x10000000) | \
-			       BATU_BL_256M | BATU_VS | BATU_VP)
-
-/* Init RAM in the CPU DCache (no backing memory)
- */
-#define CONFIG_SYS_DBAT2L	      (CONFIG_SYS_INIT_RAM_ADDR | \
-			       BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_DBAT2U	      (CONFIG_SYS_INIT_RAM_ADDR | \
-			       BATU_BL_128K | BATU_VS | BATU_VP)
-
-/* I/O and PCI memory at 0xf0000000
- */
-#define CONFIG_SYS_DBAT3L	      (0xf0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_DBAT3U	      (0xf0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT0L	      CONFIG_SYS_DBAT0L
-#define CONFIG_SYS_IBAT0U	      CONFIG_SYS_DBAT0U
-#define CONFIG_SYS_IBAT1L	      CONFIG_SYS_DBAT1L
-#define CONFIG_SYS_IBAT1U	      CONFIG_SYS_DBAT1U
-#define CONFIG_SYS_IBAT2L	      CONFIG_SYS_DBAT2L
-#define CONFIG_SYS_IBAT2U	      CONFIG_SYS_DBAT2U
-#define CONFIG_SYS_IBAT3L	      CONFIG_SYS_DBAT3L
-#define CONFIG_SYS_IBAT3U	      CONFIG_SYS_DBAT3U
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- * For the detail description refer to the PCIPPC2 user's manual.
- */
-#define CONFIG_SYS_HZ		      1000
-#define CONFIG_SYS_BUS_CLK            100000000 /* bus speed - 100 mhz          */
-#define CONFIG_SYS_CPU_CLK	      300000000
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ	      (8 << 20)	/* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* Max number of flash banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	16	/* Max number of sectors in one bank	*/
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
-
-/*
- * Note: environment is not EMBEDDED in the U-Boot code.
- * It's stored in flash separately.
- */
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x70000)
-#define CONFIG_ENV_SIZE		0x1000	/* Size of the Environment		*/
-#define CONFIG_ENV_SECT_SIZE	0x10000 /* Size of the Environment Sector	*/
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
-/*
- * L2 cache
- */
-#undef CONFIG_SYS_L2
-#define L2_INIT   (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
-		   L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
-#define L2_ENABLE (L2_INIT | L2CR_L2E)
-
-/*-----------------------------------------------------------------------
-  RTC m48t59
-*/
-#define CONFIG_RTC_MK48T59
-
-#define CONFIG_WATCHDOG
-
-
-#define CONFIG_EEPRO100
-#define CONFIG_SYS_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */
-#define CONFIG_TULIP
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/PCIPPC6.h b/include/configs/PCIPPC6.h
deleted file mode 100644
index 10b81c1..0000000
--- a/include/configs/PCIPPC6.h
+++ /dev/null
@@ -1,265 +0,0 @@ 
-/*
- * (C) Copyright 2002-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- *
- * Configuration settings for the PCIPPC-6 board.
- *
- */
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_PCIPPC2		1	/* this is a PCIPPC2 board	*/
-
-#define	CONFIG_SYS_TEXT_BASE	0xfff00000
-
-#define CONFIG_BOARD_EARLY_INIT_F 1
-#define CONFIG_MISC_INIT_R	1
-
-#define CONFIG_CONS_INDEX	1
-#define CONFIG_BAUDRATE		9600
-
-#define CONFIG_PREBOOT		""
-#define CONFIG_BOOTDELAY	5
-
-#ifndef __ASSEMBLY__
-#include <galileo/core.h>
-#endif
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_BSP
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_SCSI
-#define CONFIG_CMD_SNTP
-
-
-#define CONFIG_PCI		1
-#define CONFIG_PCI_PNP		1	/* PCI plug-and-play */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
-
-#define CONFIG_SYS_HUSH_PARSER		1	/* use "hush" command parser	*/
-#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
-
-/* Print Buffer Size
- */
-#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-
-#define CONFIG_SYS_MAXARGS	64		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CONFIG_SYS_LOAD_ADDR	0x00100000	/* Default load address		*/
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE	    0x00000000
-#define CONFIG_SYS_FLASH_BASE	    0xFFF00000
-#define CONFIG_SYS_FLASH_MAX_SIZE  0x00100000
-/* Maximum amount of RAM.
- */
-#define CONFIG_SYS_MAX_RAM_SIZE    0x20000000	/* 512Mb			*/
-
-#define CONFIG_SYS_RESET_ADDRESS   0xFFF00100
-
-#define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_TEXT_BASE
-
-#define CONFIG_SYS_MONITOR_LEN	    (256 << 10) /* Reserve 256 kB for Monitor	*/
-#define CONFIG_SYS_MALLOC_LEN	    (128 << 10) /* Reserve 128 kB for malloc()	*/
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_SDRAM_BASE && \
-    CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_MAX_RAM_SIZE
-#define CONFIG_SYS_RAMBOOT
-#else
-#undef CONFIG_SYS_RAMBOOT
-#endif
-
-#define CONFIG_SYS_MEMTEST_START   0x00004000	/* memtest works on		*/
-#define CONFIG_SYS_MEMTEST_END	    0x02000000	/* 0 ... 32 MB in DRAM		*/
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area
- */
-
-#define CONFIG_SYS_INIT_RAM_ADDR     0x40000000
-#define CONFIG_SYS_INIT_RAM_SIZE      0x8000
-#define CONFIG_SYS_GBL_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET    CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_INIT_RAM_LOCK
-
-/*
- * Temporary buffer for serial data until the real serial driver
- * is initialised (memtest will destroy this buffer)
- */
-#define CONFIG_SYS_SCONSOLE_ADDR     CONFIG_SYS_INIT_RAM_ADDR
-#define CONFIG_SYS_SCONSOLE_SIZE     0x0002000
-
-/* SDRAM 0 - 256MB
- */
-#define CONFIG_SYS_DBAT0L	      (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_DBAT0U	      (CONFIG_SYS_SDRAM_BASE | \
-			       BATU_BL_256M | BATU_VS | BATU_VP)
-/* SDRAM 1 - 256MB
- */
-#define CONFIG_SYS_DBAT1L	      ((CONFIG_SYS_SDRAM_BASE + 0x10000000) | \
-			       BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_DBAT1U	      ((CONFIG_SYS_SDRAM_BASE + 0x10000000) | \
-			       BATU_BL_256M | BATU_VS | BATU_VP)
-
-/* Init RAM in the CPU DCache (no backing memory)
- */
-#define CONFIG_SYS_DBAT2L	      (CONFIG_SYS_INIT_RAM_ADDR | \
-			       BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_DBAT2U	      (CONFIG_SYS_INIT_RAM_ADDR | \
-			       BATU_BL_128K | BATU_VS | BATU_VP)
-
-/* I/O and PCI memory at 0xf0000000
- */
-#define CONFIG_SYS_DBAT3L	      (0xf0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_DBAT3U	      (0xf0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT0L	      CONFIG_SYS_DBAT0L
-#define CONFIG_SYS_IBAT0U	      CONFIG_SYS_DBAT0U
-#define CONFIG_SYS_IBAT1L	      CONFIG_SYS_DBAT1L
-#define CONFIG_SYS_IBAT1U	      CONFIG_SYS_DBAT1U
-#define CONFIG_SYS_IBAT2L	      CONFIG_SYS_DBAT2L
-#define CONFIG_SYS_IBAT2U	      CONFIG_SYS_DBAT2U
-#define CONFIG_SYS_IBAT3L	      CONFIG_SYS_DBAT3L
-#define CONFIG_SYS_IBAT3U	      CONFIG_SYS_DBAT3U
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- * For the detail description refer to the PCIPPC2 user's manual.
- */
-#define CONFIG_SYS_HZ		      1000
-#define CONFIG_SYS_BUS_CLK	      100000000 /* bus speed - 100 mhz		*/
-#define CONFIG_SYS_CPU_CLK	      300000000
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ	      (8 << 20) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* Max number of flash banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	16	/* Max number of sectors in one bank	*/
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
-
-/*
- * Note: environment is not EMBEDDED in the U-Boot code.
- * It's stored in flash separately.
- */
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x70000)
-#define CONFIG_ENV_SIZE		0x1000	/* Size of the Environment		*/
-#define CONFIG_ENV_SECT_SIZE	0x10000 /* Size of the Environment Sector	*/
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
-/*
- * L2 cache
- */
-#undef CONFIG_SYS_L2
-#define L2_INIT	  (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
-		   L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
-#define L2_ENABLE (L2_INIT | L2CR_L2E)
-
-/*-----------------------------------------------------------------------
-  RTC m48t59
-*/
-#define CONFIG_RTC_MK48T59
-
-#define CONFIG_WATCHDOG
-
-
-#define CONFIG_EEPRO100
-#define CONFIG_SYS_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */
-#define CONFIG_TULIP
-
-
-#define CONFIG_SCSI_SYM53C8XX
-#define CONFIG_SCSI_DEV_ID	0x000B	/* 53c896 */
-#define CONFIG_SYS_SCSI_MAX_LUN	8	/* number of supported LUNs */
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID	15	/* maximum SCSI ID (0..6) */
-#define CONFIG_SYS_SCSI_MAX_DEVICE	CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN /* maximum Target devices */
-#define CONFIG_SYS_SCSI_SPIN_UP_TIME	2
-#define CONFIG_SYS_SCSI_SCAN_BUS_REVERSE 0
-#define CONFIG_DOS_PARTITION
-#define CONFIG_MAC_PARTITION
-#define CONFIG_ISO_PARTITION
-
-#endif	/* __CONFIG_H */