Patchwork add Gnublin board support

login
register
mail settings
Submitter Zoltan Gyarmati
Date Feb. 6, 2013, 12:37 p.m.
Message ID <1360154267-18767-1-git-send-email-mr.zoltan.gyarmati@gmail.com>
Download mbox | patch
Permalink /patch/218584/
State Superseded
Headers show

Comments

Zoltan Gyarmati - Feb. 6, 2013, 12:37 p.m.
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
---
 board/gnublin/README                |   41 +
 board/gnublin/gnublin_kernel_config | 1836 +++++++++++++++++++++++++++++++++++
 configs/gnublin_defconfig           | 1253 ++++++++++++++++++++++++
 3 files changed, 3130 insertions(+)
 create mode 100644 board/gnublin/README
 create mode 100644 board/gnublin/gnublin_kernel_config
 create mode 100644 configs/gnublin_defconfig
Thomas Petazzoni - Feb. 6, 2013, 3:46 p.m.
Dear Zoltan Gyarmati,

On Wed,  6 Feb 2013 13:37:47 +0100, Zoltan Gyarmati wrote:
> 
> Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
> ---
>  board/gnublin/README                |   41 +
>  board/gnublin/gnublin_kernel_config | 1836 +++++++++++++++++++++++++++++++++++

The kernel configuration file should preferably be a minimal
configuration file, generated using linux-savedefconfig.

>  configs/gnublin_defconfig           | 1253 ++++++++++++++++++++++++

Ditto here, minimal Buildroot config file preferred. Generated using
make savedefconfig.

> +++ b/board/gnublin/README
> @@ -0,0 +1,41 @@
> +This the Buildroot support for the Gnublin board 
> +(see here: http://en.gnublin.org/) and to the Elektor Linux board
> +(http://www.elektor.com/news/elektor-presents-embedded-linux-made-easy.2147294.lynkx)
> +Unfortunately currently the AD and the pwm modules are not supported, i'm about to
> +add also those drivers as well to the current kernel later.

[...]

Could you wrap those lines to ~80 columns maximum? Good text editors
should have a way of doing that automatically for you.

> +Base kernel version: 3.7.0 (available here: https://gitorious.org/linux-3-7-gnublin/linux-3-7-gnublin/commits/gnublin-support)
> +U-boot version: 2009.11 (available here: https://gitorious.org/u-boot-gnublin-support/u-boot-gnublin-support)
> +
> +Steps to create a bootable SD card:
> +
> +#config buildroot with the gnublin_defconfig:

I believe it is a bit strange to have those comments starting with "#"
because "#" is also usually the root prompt. What about something like:

 1. Configure buildroot with the gnublin_defconfig

 $ make gnublin_defconfig

And ditto for the next steps?

> +
> +$ make gnublin_defconfig
> +
> +#tweak the config for your needs:
> +
> +$ make menuconfig
> +
> +#and build:
> +
> +$ make
> +
> +#Create 2 partitions on your SD card, one with type of BootIt (fdisk ID: df), the size should
> +#be around 1M, and another partition with  all of the left space on the card, and 
> +#with the type of normal DOS partition.
> +
> +#from the output/images directory dump the u-boot image to the BootIt partition:
> +
> +$ dd if=output/images/u-boot.bin of=/dev/sdc2  
> +#                                      ^^^^  modify it accordingly

Are you sure U-Boot goes on the second partition? My understanding of
your text is that the first partition is the small one with a special
type (I assume for the bootloader), and the second, big partition, is
for the root filesystem.

> +#and the dump the root fs image as well:
> +$ dd if=output/images/rootfs.ext2 of=/dev/sdc1
> +#                                      ^^^^  modify it accordingly

Instead of "^^^^ modify it accordingly", just mention it on a different
line, like "Of course, /dev/sdc1 should be adjusted depending on which
device corresponds to the SD card on your system", or something like
that.

Best regards,

Thomas
Zoltan Gyarmati - Feb. 6, 2013, 4:07 p.m.
On 02/06/2013 04:46 PM, Thomas Petazzoni wrote:
> Dear Zoltan Gyarmati,
>
> On Wed,  6 Feb 2013 13:37:47 +0100, Zoltan Gyarmati wrote:
>> Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
>> ---
>>   board/gnublin/README                |   41 +
>>   board/gnublin/gnublin_kernel_config | 1836 +++++++++++++++++++++++++++++++++++
> The kernel configuration file should preferably be a minimal
> configuration file, generated using linux-savedefconfig.
>
>>   configs/gnublin_defconfig           | 1253 ++++++++++++++++++++++++
> Ditto here, minimal Buildroot config file preferred. Generated using
> make savedefconfig.
>
>> +++ b/board/gnublin/README
>> @@ -0,0 +1,41 @@
>> +This the Buildroot support for the Gnublin board
>> +(see here: http://en.gnublin.org/) and to the Elektor Linux board
>> +(http://www.elektor.com/news/elektor-presents-embedded-linux-made-easy.2147294.lynkx)
>> +Unfortunately currently the AD and the pwm modules are not supported, i'm about to
>> +add also those drivers as well to the current kernel later.
> [...]
>
> Could you wrap those lines to ~80 columns maximum? Good text editors
> should have a way of doing that automatically for you.
>
>> +Base kernel version: 3.7.0 (available here: https://gitorious.org/linux-3-7-gnublin/linux-3-7-gnublin/commits/gnublin-support)
>> +U-boot version: 2009.11 (available here: https://gitorious.org/u-boot-gnublin-support/u-boot-gnublin-support)
>> +
>> +Steps to create a bootable SD card:
>> +
>> +#config buildroot with the gnublin_defconfig:
> I believe it is a bit strange to have those comments starting with "#"
> because "#" is also usually the root prompt. What about something like:
>
>   1. Configure buildroot with the gnublin_defconfig
>
>   $ make gnublin_defconfig
>
> And ditto for the next steps?
>
>> +
>> +$ make gnublin_defconfig
>> +
>> +#tweak the config for your needs:
>> +
>> +$ make menuconfig
>> +
>> +#and build:
>> +
>> +$ make
>> +
>> +#Create 2 partitions on your SD card, one with type of BootIt (fdisk ID: df), the size should
>> +#be around 1M, and another partition with  all of the left space on the card, and
>> +#with the type of normal DOS partition.
>> +
>> +#from the output/images directory dump the u-boot image to the BootIt partition:
>> +
>> +$ dd if=output/images/u-boot.bin of=/dev/sdc2
>> +#                                      ^^^^  modify it accordingly
> Are you sure U-Boot goes on the second partition? My understanding of
> your text is that the first partition is the small one with a special
> type (I assume for the bootloader), and the second, big partition, is
> for the root filesystem.
>
>> +#and the dump the root fs image as well:
>> +$ dd if=output/images/rootfs.ext2 of=/dev/sdc1
>> +#                                      ^^^^  modify it accordingly
> Instead of "^^^^ modify it accordingly", just mention it on a different
> line, like "Of course, /dev/sdc1 should be adjusted depending on which
> device corresponds to the SD card on your system", or something like
> that.
>
> Best regards,
>
> Thomas
Hi Thomas,

thx for the input, i'll correct and resend it.
Arnout Vandecappelle - Feb. 6, 2013, 5:31 p.m.
Hi Zoltan,

  A few comments in addition to Thomas's.

On 06/02/13 13:37, Zoltan Gyarmati wrote:
>
> Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
> ---
>   board/gnublin/README                |   41 +
>   board/gnublin/gnublin_kernel_config | 1836 +++++++++++++++++++++++++++++++++++

  The kernel config is typically called "linux-<version>.config".  In 
your case, the version is gnublin_support_v1 which is a bit unfortunate, 
so perhaps 3.7 is better.

  (It would be nice if the gnublin kernel tree would tag with e.g. 
v3.7-gnublin-1 instead.)

  It would also be nice if the gnublin kernel tree would contain a 
defconfig for the board, then there's no need to include a custom linux 
config in buildroot.

  It would also be nice if it would follow the stable kernel (currently 
3.7.6 I think).

>   configs/gnublin_defconfig           | 1253 ++++++++++++++++++++++++
>   3 files changed, 3130 insertions(+)
>   create mode 100644 board/gnublin/README
>   create mode 100644 board/gnublin/gnublin_kernel_config
>   create mode 100644 configs/gnublin_defconfig
>
> diff --git a/board/gnublin/README b/board/gnublin/README
> new file mode 100644
> index 0000000..a4fdeb1
> --- /dev/null
> +++ b/board/gnublin/README
> @@ -0,0 +1,41 @@
> +This the Buildroot support for the Gnublin board
> +(see here: http://en.gnublin.org/) and to the Elektor Linux board
> +(http://www.elektor.com/news/elektor-presents-embedded-linux-made-easy.2147294.lynkx)
> +Unfortunately currently the AD and the pwm modules are not supported, i'm about to
> +add also those drivers as well to the current kernel later.

  Would be nice to mention the SoC used.

> +
> +Base kernel version: 3.7.0 (available here: https://gitorious.org/linux-3-7-gnublin/linux-3-7-gnublin/commits/gnublin-support)

  I guess that should be 3.7 (there is no 3.7.0 tag or tarball).

> +U-boot version: 2009.11 (available here: https://gitorious.org/u-boot-gnublin-support/u-boot-gnublin-support)
> +
> +Steps to create a bootable SD card:
> +
> +#config buildroot with the gnublin_defconfig:
> +
> +$ make gnublin_defconfig
> +
> +#tweak the config for your needs:
> +
> +$ make menuconfig
> +
> +#and build:
> +
> +$ make
> +
> +#Create 2 partitions on your SD card, one with type of BootIt (fdisk ID: df), the size should
> +#be around 1M, and another partition with  all of the left space on the card, and
> +#with the type of normal DOS partition.
> +
> +#from the output/images directory dump the u-boot image to the BootIt partition:
> +
> +$ dd if=output/images/u-boot.bin of=/dev/sdc2
> +#                                      ^^^^  modify it accordingly

  Tip: if you're not using conversions, cat is generally much more 
efficient than dd:

cat output/images/u-boot.bin > /dev/sdc2


  Regards,
  Arnout

> +
> +#and the dump the root fs image as well:
> +$ dd if=output/images/rootfs.ext2 of=/dev/sdc1
> +#                                      ^^^^  modify it accordingly
> +#Insert the SD card into the board's slot, and your board should boot up with your newly created system
> +Any feedback/report is welcome on the mr.zoltan.gyarmati[at]gmail.com

Patch

diff --git a/board/gnublin/README b/board/gnublin/README
new file mode 100644
index 0000000..a4fdeb1
--- /dev/null
+++ b/board/gnublin/README
@@ -0,0 +1,41 @@ 
+This the Buildroot support for the Gnublin board 
+(see here: http://en.gnublin.org/) and to the Elektor Linux board
+(http://www.elektor.com/news/elektor-presents-embedded-linux-made-easy.2147294.lynkx)
+Unfortunately currently the AD and the pwm modules are not supported, i'm about to
+add also those drivers as well to the current kernel later.
+
+Base kernel version: 3.7.0 (available here: https://gitorious.org/linux-3-7-gnublin/linux-3-7-gnublin/commits/gnublin-support)
+U-boot version: 2009.11 (available here: https://gitorious.org/u-boot-gnublin-support/u-boot-gnublin-support)
+
+Steps to create a bootable SD card:
+
+#config buildroot with the gnublin_defconfig:
+
+$ make gnublin_defconfig
+
+#tweak the config for your needs:
+
+$ make menuconfig
+
+#and build:
+
+$ make
+
+#Create 2 partitions on your SD card, one with type of BootIt (fdisk ID: df), the size should
+#be around 1M, and another partition with  all of the left space on the card, and 
+#with the type of normal DOS partition.
+
+#from the output/images directory dump the u-boot image to the BootIt partition:
+
+$ dd if=output/images/u-boot.bin of=/dev/sdc2  
+#                                      ^^^^  modify it accordingly
+
+#and the dump the root fs image as well:
+$ dd if=output/images/rootfs.ext2 of=/dev/sdc1
+#                                      ^^^^  modify it accordingly
+#Insert the SD card into the board's slot, and your board should boot up with your newly created system
+Any feedback/report is welcome on the mr.zoltan.gyarmati[at]gmail.com 
+
+
+
+
diff --git a/board/gnublin/gnublin_kernel_config b/board/gnublin/gnublin_kernel_config
new file mode 100644
index 0000000..5a313dd
--- /dev/null
+++ b/board/gnublin/gnublin_kernel_config
@@ -0,0 +1,1836 @@ 
+#
+# Automatically generated file; DO NOT EDIT.
+# Linux/arm 3.7.0 Kernel Configuration
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_HAVE_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_XZ is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_DEFAULT_HOSTNAME="(none)"
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_FHANDLE is not set
+# CONFIG_AUDIT is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_IRQ_DOMAIN=y
+# CONFIG_IRQ_DOMAIN_DEBUG is not set
+CONFIG_KTIME_SCALAR=y
+CONFIG_ARCH_USES_GETTIMEOFFSET=y
+
+#
+# CPU/Task time and stats accounting
+#
+CONFIG_TICK_CPU_ACCOUNTING=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TINY_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_CHECKPOINT_RESTORE is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_SCHED_AUTOGROUP is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+# CONFIG_RD_XZ is not set
+# CONFIG_RD_LZO is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EXPERT=y
+CONFIG_HAVE_UID16=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_EMBEDDED=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_JUMP_LABEL is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_GENERIC_KERNEL_THREAD=y
+CONFIG_GENERIC_KERNEL_EXECVE=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_MODULES_USE_ELF_REL=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_MODULE_SIG is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_BSGLIB is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+CONFIG_INLINE_READ_UNLOCK=y
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+CONFIG_INLINE_WRITE_UNLOCK=y
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_MULTIPLATFORM is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCM2835 is not set
+# CONFIG_ARCH_CNS3XXX is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_SIRF is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_MXS is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_LPC32XX is not set
+CONFIG_ARCH_LPC31XX=y
+# CONFIG_ARCH_TEGRA is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C24XX is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P64X0 is not set
+# CONFIG_ARCH_S5PC100 is not set
+# CONFIG_ARCH_S5PV210 is not set
+# CONFIG_ARCH_EXYNOS is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_PLAT_SPEAR is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VT8500 is not set
+# CONFIG_ARCH_ZYNQ is not set
+# CONFIG_GPIO_PCA953X is not set
+
+#
+# LPC313x Implementations
+#
+# CONFIG_MACH_EA313X is not set
+CONFIG_MACH_GNUBLIN=y
+# CONFIG_MACH_EA3152 is not set
+# CONFIG_MACH_VAL3153 is not set
+# CONFIG_MACH_VAL3154 is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+
+#
+# Special settings
+#
+# CONFIG_DUAL_MODE is not set
+# CONFIG_CS_TO_IO11 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_USE_DOMAINS=y
+
+#
+# Processor Features
+#
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_CACHE_L2X0 is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_NR_BANKS=8
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_ARCH_NR_GPIO=0
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_HAVE_ARCH_PFN_VALID=y
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_COMPACTION is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_CROSS_MEMORY_ATTACH=y
+CONFIG_NEED_PER_CPU_KM=y
+# CONFIG_CLEANCACHE is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+# CONFIG_SECCOMP is not set
+# CONFIG_CC_STACKPROTECTOR is not set
+
+#
+# Boot options
+#
+CONFIG_USE_OF=y
+CONFIG_ATAGS=y
+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+# CONFIG_ARM_APPENDED_DTB is not set
+CONFIG_CMDLINE="console=ttyS0,115200n8 root=/dev/ram0 rw"
+CONFIG_CMDLINE_FROM_BOOTLOADER=y
+# CONFIG_CMDLINE_EXTEND is not set
+# CONFIG_CMDLINE_FORCE is not set
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_AUTO_ZRELADDR is not set
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_COREDUMP=y
+
+#
+# Power management options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_PM_SLEEP=y
+# CONFIG_PM_AUTOSLEEP is not set
+# CONFIG_PM_WAKELOCKS is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_PM_CLK=y
+CONFIG_CPU_PM=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARM_CPU_SUSPEND=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+# CONFIG_UNIX_DIAG is not set
+# CONFIG_XFRM_USER is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE_DEMUX is not set
+CONFIG_ARPD=y
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+CONFIG_IEEE802154=y
+# CONFIG_MAC802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+# CONFIG_BATMAN_ADV is not set
+# CONFIG_OPENVSWITCH is not set
+CONFIG_BQL=y
+# CONFIG_BPF_JIT is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_CFG80211=y
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+# CONFIG_LIB80211 is not set
+CONFIG_MAC80211=y
+CONFIG_MAC80211_HAS_RC=y
+# CONFIG_MAC80211_RC_PID is not set
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_MESSAGE_TRACING is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
+# CONFIG_CEPH_LIB is not set
+# CONFIG_NFC is not set
+CONFIG_HAVE_BPF_JIT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_GENERIC_CPU_DEVICES is not set
+# CONFIG_DMA_SHARED_BUFFER is not set
+# CONFIG_CMA is not set
+
+#
+# Bus devices
+#
+# CONFIG_OMAP_OCP2SCP is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOCG3 is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_UBI is not set
+CONFIG_DTC=y
+CONFIG_OF=y
+
+#
+# Device Tree and Open Firmware support
+#
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_OF_SELFTEST is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+CONFIG_OF_NET=y
+CONFIG_OF_MTD=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_XIP=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_BLK_DEV_RBD is not set
+
+#
+# Misc devices
+#
+# CONFIG_SENSORS_LIS3LV02D is not set
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_ATMEL_PWM is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_APDS9802ALS is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_ISL29020 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_SENSORS_BH1780 is not set
+# CONFIG_SENSORS_BH1770 is not set
+# CONFIG_SENSORS_APDS990X is not set
+# CONFIG_HMC6352 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_BMP085_I2C is not set
+# CONFIG_USB_SWITCH_FSA9480 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+# CONFIG_TI_ST is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
+
+#
+# Altera FPGA firmware download module
+#
+# CONFIG_ALTERA_STAPL is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_ISCSI_BOOT_SYSFS is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_TARGET_CORE is not set
+CONFIG_NETDEVICES=y
+CONFIG_NET_CORE=y
+# CONFIG_BONDING is not set
+# CONFIG_DUMMY is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_MII=y
+# CONFIG_NET_TEAM is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_VXLAN is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+
+#
+# CAIF transport drivers
+#
+CONFIG_ETHERNET=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_CALXEDA_XGMAC is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_DM9000 is not set
+# CONFIG_DNET is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_ETHOC is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_PHYLIB is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET=y
+# CONFIG_USB_NET_AX8817X is not set
+# CONFIG_USB_NET_CDCETHER is not set
+CONFIG_USB_NET_CDC_EEM=y
+# CONFIG_USB_NET_CDC_NCM is not set
+CONFIG_USB_NET_DM9601=y
+# CONFIG_USB_NET_SMSC75XX is not set
+# CONFIG_USB_NET_SMSC95XX is not set
+# CONFIG_USB_NET_GL620A is not set
+# CONFIG_USB_NET_NET1080 is not set
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+# CONFIG_USB_NET_ZAURUS is not set
+# CONFIG_USB_NET_CX82310_ETH is not set
+# CONFIG_USB_NET_KALMIA is not set
+# CONFIG_USB_NET_QMI_WWAN is not set
+# CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_USB_IPHETH is not set
+# CONFIG_USB_SIERRA_NET is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_IEEE802154_DRIVERS is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+# CONFIG_INPUT_MATRIXKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
+# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
+# CONFIG_TOUCHSCREEN_BU21013 is not set
+# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
+# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_EGALAX is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_ILI210X is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
+# CONFIG_TOUCHSCREEN_MAX11801 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MMS114 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_PIXCIR is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_TOUCHSCREEN_ST1232 is not set
+# CONFIG_TOUCHSCREEN_TPS6507X is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
+# CONFIG_TRACE_SINK is not set
+CONFIG_DEVKMEM=y
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250_DW is not set
+CONFIG_LPC31XX_SERIAL_DMA_SUPPORT=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_SCCNXP is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+# CONFIG_SERIAL_XILINX_PS_UART is not set
+# CONFIG_TTY_PRINTK is not set
+# CONFIG_HVC_DCC is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_MUX is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+CONFIG_I2C_PNX=y
+# CONFIG_I2C_PXA_PCI is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_DIOLAN_U2C is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_STUB is not set
+CONFIG_I2C_DEBUG_CORE=y
+CONFIG_I2C_DEBUG_ALGO=y
+CONFIG_I2C_DEBUG_BUS=y
+# CONFIG_SPI is not set
+# CONFIG_HSI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+
+#
+# Enable Device Drivers -> PPS to see the PTP clock options.
+#
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_OF_GPIO=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO drivers:
+#
+# CONFIG_GPIO_GENERIC_PLATFORM is not set
+# CONFIG_GPIO_EM is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_SX150X is not set
+# CONFIG_GPIO_ADP5588 is not set
+# CONFIG_GPIO_ADNP is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
+
+#
+# AC97 GPIO expanders:
+#
+
+#
+# MODULbus GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_POWER_AVS is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+CONFIG_BCMA_POSSIBLE=y
+
+#
+# Broadcom specific AMBA
+#
+# CONFIG_BCMA is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_88PM800 is not set
+# CONFIG_MFD_88PM805 is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_MFD_LM3533 is not set
+# CONFIG_TPS6105X is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TPS6507X is not set
+# CONFIG_MFD_TPS65217 is not set
+# CONFIG_MFD_TPS65910 is not set
+# CONFIG_MFD_TPS65912_I2C is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_TWL6040_CORE is not set
+# CONFIG_MFD_STMPE is not set
+# CONFIG_MFD_TC3589X is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_SMSC is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_DA9052_I2C is not set
+# CONFIG_MFD_DA9055 is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_LP8788 is not set
+# CONFIG_MFD_MAX77686 is not set
+# CONFIG_MFD_MAX77693 is not set
+# CONFIG_MFD_MAX8907 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_MAX8997 is not set
+# CONFIG_MFD_MAX8998 is not set
+# CONFIG_MFD_SEC_CORE is not set
+# CONFIG_MFD_ARIZONA_I2C is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X_I2C is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13XXX_I2C is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_MFD_WL1273_CORE is not set
+# CONFIG_MFD_TPS65090 is not set
+# CONFIG_MFD_AAT2870_CORE is not set
+# CONFIG_MFD_RC5T583 is not set
+# CONFIG_MFD_SYSCON is not set
+# CONFIG_MFD_PALMAS is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_WMT_GE_ROPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_SMSCUFX is not set
+# CONFIG_FB_UDL is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_AUO_K190X is not set
+# CONFIG_EXYNOS_VIDEO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_LOGO is not set
+# CONFIG_SOUND is not set
+
+#
+# HID support
+#
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+# CONFIG_UHID is not set
+CONFIG_HID_GENERIC=y
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_ACRUX is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_AUREAL is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EMS_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_HOLTEK is not set
+# CONFIG_HID_KEYTOUCH is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_UCLOGIC is not set
+# CONFIG_HID_WALTOP is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LCPOWER is not set
+# CONFIG_HID_LENOVO_TPKBD is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_MULTITOUCH is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_PICOLCD is not set
+# CONFIG_HID_PRIMAX is not set
+# CONFIG_HID_ROCCAT is not set
+# CONFIG_HID_SAITEK is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SPEEDLINK is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TIVO is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+# CONFIG_HID_ZYDACRON is not set
+# CONFIG_HID_SENSOR_HUB is not set
+
+#
+# USB HID support
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB_ARCH_HAS_XHCI is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_DWC3 is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_FSL_MPH_DR_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
+CONFIG_USB_EHCI_LPC=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_EHCI_HCD_PLATFORM is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_CHIPIDEA is not set
+# CONFIG_USB_RENESAS_USBHS is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_DEBUG=y
+# CONFIG_USB_STORAGE_REALTEK is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_STORAGE_ENE_UB6250 is not set
+# CONFIG_USB_UAS is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_YUREX is not set
+# CONFIG_USB_EZUSB_FX2 is not set
+
+#
+# USB Physical Layer drivers
+#
+# CONFIG_OMAP_USB2 is not set
+# CONFIG_USB_ISP1301 is not set
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DEBUG=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
+
+#
+# USB Peripheral Controller
+#
+CONFIG_USB_FSL_USB2=y
+# CONFIG_USB_FUSB300 is not set
+# CONFIG_USB_R8A66597 is not set
+# CONFIG_USB_MV_UDC is not set
+# CONFIG_USB_M66592 is not set
+# CONFIG_USB_NET2272 is not set
+# CONFIG_USB_DUMMY_HCD is not set
+CONFIG_USB_LIBCOMPOSITE=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_G_NCM is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FUNCTIONFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
+CONFIG_USB_G_SERIAL=y
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_ACM_MS is not set
+# CONFIG_USB_G_MULTI is not set
+# CONFIG_USB_G_HID is not set
+# CONFIG_USB_G_DBGP is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_LPC31XX=y
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_SDHCI_PXAV3 is not set
+# CONFIG_MMC_SDHCI_PXAV2 is not set
+# CONFIG_MMC_DW is not set
+# CONFIG_MMC_VUB300 is not set
+# CONFIG_MMC_USHC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_UIO=y
+# CONFIG_UIO_PDRV is not set
+# CONFIG_UIO_PDRV_GENIRQ is not set
+
+#
+# Virtio drivers
+#
+# CONFIG_VIRTIO_MMIO is not set
+
+#
+# Microsoft Hyper-V guest support
+#
+CONFIG_STAGING=y
+# CONFIG_USBIP_CORE is not set
+# CONFIG_ECHO is not set
+# CONFIG_ASUS_OLED is not set
+# CONFIG_RTS5139 is not set
+# CONFIG_TRANZPORT is not set
+# CONFIG_ZSMALLOC is not set
+# CONFIG_USB_ENESTORAGE is not set
+# CONFIG_BCM_WIMAX is not set
+# CONFIG_FT1000 is not set
+
+#
+# Speakup console speech
+#
+# CONFIG_TOUCHSCREEN_CLEARPAD_TM1217 is not set
+# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
+# CONFIG_STAGING_MEDIA is not set
+
+#
+# Android
+#
+CONFIG_ANDROID=y
+# CONFIG_ANDROID_BINDER_IPC is not set
+# CONFIG_ASHMEM is not set
+# CONFIG_ANDROID_LOGGER is not set
+CONFIG_ANDROID_TIMED_OUTPUT=y
+# CONFIG_ANDROID_TIMED_GPIO is not set
+# CONFIG_ANDROID_LOW_MEMORY_KILLER is not set
+# CONFIG_PHONE is not set
+# CONFIG_USB_WPAN_HCD is not set
+# CONFIG_IPACK_BUS is not set
+# CONFIG_WIMAX_GDM72XX is not set
+# CONFIG_CSR_WIFI is not set
+# CONFIG_CED1401 is not set
+# CONFIG_DGRP is not set
+CONFIG_CLKDEV_LOOKUP=y
+
+#
+# Hardware Spinlock drivers
+#
+CONFIG_IOMMU_SUPPORT=y
+CONFIG_OF_IOMMU=y
+
+#
+# Remoteproc drivers (EXPERIMENTAL)
+#
+# CONFIG_STE_MODEM_RPROC is not set
+
+#
+# Rpmsg drivers (EXPERIMENTAL)
+#
+# CONFIG_VIRT_DRIVERS is not set
+# CONFIG_PM_DEVFREQ is not set
+# CONFIG_EXTCON is not set
+# CONFIG_MEMORY is not set
+# CONFIG_IIO is not set
+# CONFIG_PWM is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_FANOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_QUOTACTL is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_TMPFS_XATTR is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_QNX6FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_PSTORE is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V2=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_SWAP is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_DEBUG is not set
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_MAC_ROMAN is not set
+# CONFIG_NLS_MAC_CELTIC is not set
+# CONFIG_NLS_MAC_CENTEURO is not set
+# CONFIG_NLS_MAC_CROATIAN is not set
+# CONFIG_NLS_MAC_CYRILLIC is not set
+# CONFIG_NLS_MAC_GAELIC is not set
+# CONFIG_NLS_MAC_GREEK is not set
+# CONFIG_NLS_MAC_ICELAND is not set
+# CONFIG_NLS_MAC_INUIT is not set
+# CONFIG_NLS_MAC_ROMANIAN is not set
+# CONFIG_NLS_MAC_TURKISH is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=7
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_READABLE_ASM is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_PANIC_ON_OOPS is not set
+CONFIG_PANIC_ON_OOPS_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
+# CONFIG_NOTIFIER_ERROR_INJECTION is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_RBTREE_TEST is not set
+# CONFIG_INTERVAL_TREE_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_LL is not set
+CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_USER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA1_ARM is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_AES_ARM is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+# CONFIG_CRYPTO_USER_API_HASH is not set
+# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_IO=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+# CONFIG_CRC32_SELFTEST is not set
+CONFIG_CRC32_SLICEBY8=y
+# CONFIG_CRC32_SLICEBY4 is not set
+# CONFIG_CRC32_SARWATE is not set
+# CONFIG_CRC32_BIT is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+# CONFIG_CRC8 is not set
+CONFIG_ZLIB_INFLATE=y
+# CONFIG_XZ_DEC is not set
+# CONFIG_XZ_DEC_BCJ is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_DQL=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_AVERAGE=y
+# CONFIG_CORDIC is not set
+# CONFIG_DDR is not set
diff --git a/configs/gnublin_defconfig b/configs/gnublin_defconfig
new file mode 100644
index 0000000..f815dad
--- /dev/null
+++ b/configs/gnublin_defconfig
@@ -0,0 +1,1253 @@ 
+#
+# Automatically generated make config: don't edit
+# Buildroot 2013.02-00743-g3ba9591 Configuration
+#
+BR2_HAVE_DOT_CONFIG=y
+BR2_arm=y
+# BR2_armeb is not set
+# BR2_aarch64 is not set
+# BR2_avr32 is not set
+# BR2_bfin is not set
+# BR2_i386 is not set
+# BR2_microblazeel is not set
+# BR2_microblazebe is not set
+# BR2_mips is not set
+# BR2_mipsel is not set
+# BR2_mips64 is not set
+# BR2_mips64el is not set
+# BR2_powerpc is not set
+# BR2_sh is not set
+# BR2_sh64 is not set
+# BR2_sparc is not set
+# BR2_x86_64 is not set
+# BR2_xtensa is not set
+BR2_ARCH="arm"
+BR2_ENDIAN="LITTLE"
+BR2_GCC_TARGET_TUNE="arm926ej-s"
+BR2_GCC_TARGET_ARCH="armv5te"
+BR2_GCC_TARGET_ABI="aapcs-linux"
+# BR2_generic_arm is not set
+# BR2_arm7tdmi is not set
+# BR2_arm610 is not set
+# BR2_arm710 is not set
+# BR2_arm720t is not set
+# BR2_arm920t is not set
+# BR2_arm922t is not set
+BR2_arm926t=y
+# BR2_arm10t is not set
+# BR2_arm1136jf_s_r0 is not set
+# BR2_arm1136jf_s_r1 is not set
+# BR2_arm1176jz_s is not set
+# BR2_arm1176jzf_s is not set
+# BR2_cortex_a5 is not set
+# BR2_cortex_a8 is not set
+# BR2_cortex_a9 is not set
+# BR2_cortex_a15 is not set
+# BR2_sa110 is not set
+# BR2_sa1100 is not set
+# BR2_xscale is not set
+# BR2_iwmmxt is not set
+# BR2_arm1136jf_s is not set
+BR2_ARM_EABI=y
+# BR2_ARM_OABI is not set
+BR2_DEFCONFIG="$(CONFIG_DIR)/defconfig"
+
+#
+# Build options
+#
+
+#
+# Commands
+#
+BR2_WGET="wget --passive-ftp -nd -t 3"
+BR2_SVN="svn"
+BR2_BZR="bzr"
+BR2_GIT="git"
+BR2_LOCALFILES="cp"
+BR2_SCP="scp"
+BR2_SSH="ssh"
+BR2_HG="hg"
+BR2_ZCAT="gzip -d -c"
+BR2_BZCAT="bzcat"
+BR2_XZCAT="xzcat"
+BR2_TAR_OPTIONS=""
+BR2_DL_DIR="$(TOPDIR)/dl"
+BR2_HOST_DIR="$(BASE_DIR)/host"
+
+#
+# Mirrors and Download locations
+#
+BR2_PRIMARY_SITE=""
+BR2_BACKUP_SITE="http://sources.buildroot.net/"
+BR2_KERNEL_MIRROR="http://www.kernel.org/pub/"
+BR2_GNU_MIRROR="http://ftp.gnu.org/pub/gnu"
+BR2_DEBIAN_MIRROR="http://ftp.debian.org"
+BR2_JLEVEL=0
+# BR2_CCACHE is not set
+# BR2_DEPRECATED is not set
+# BR2_ENABLE_DEBUG is not set
+BR2_STRIP_strip=y
+# BR2_STRIP_sstrip is not set
+# BR2_STRIP_none is not set
+BR2_STRIP_EXCLUDE_FILES=""
+BR2_STRIP_EXCLUDE_DIRS=""
+# BR2_OPTIMIZE_0 is not set
+# BR2_OPTIMIZE_1 is not set
+# BR2_OPTIMIZE_2 is not set
+# BR2_OPTIMIZE_3 is not set
+BR2_OPTIMIZE_S=y
+# BR2_PREFER_STATIC_LIB is not set
+BR2_PACKAGE_OVERRIDE_FILE="$(TOPDIR)/local.mk"
+
+#
+# Toolchain
+#
+BR2_TOOLCHAIN_BUILDROOT=y
+# BR2_TOOLCHAIN_EXTERNAL is not set
+# BR2_TOOLCHAIN_CTNG is not set
+
+#
+# Kernel Header Options
+#
+# BR2_KERNEL_HEADERS_3_0 is not set
+# BR2_KERNEL_HEADERS_3_2 is not set
+# BR2_KERNEL_HEADERS_3_4 is not set
+# BR2_KERNEL_HEADERS_3_6 is not set
+BR2_KERNEL_HEADERS_3_7=y
+# BR2_KERNEL_HEADERS_VERSION is not set
+# BR2_KERNEL_HEADERS_SNAP is not set
+BR2_DEFAULT_KERNEL_HEADERS="3.7.6"
+
+#
+# uClibc Options
+#
+# BR2_UCLIBC_VERSION_0_9_31 is not set
+# BR2_UCLIBC_VERSION_0_9_32 is not set
+BR2_UCLIBC_VERSION_0_9_33=y
+# BR2_UCLIBC_VERSION_SNAPSHOT is not set
+BR2_UCLIBC_VERSION_STRING="0.9.33.2"
+BR2_UCLIBC_CONFIG="toolchain/uClibc/uClibc-0.9.33.config"
+# BR2_PTHREAD_DEBUG is not set
+# BR2_UCLIBC_INSTALL_TEST_SUITE is not set
+BR2_UCLIBC_ARM_TYPE="ARM926T"
+
+#
+# Binutils Options
+#
+# BR2_BINUTILS_VERSION_2_20_1 is not set
+# BR2_BINUTILS_VERSION_2_21 is not set
+BR2_BINUTILS_VERSION_2_21_1=y
+# BR2_BINUTILS_VERSION_2_22 is not set
+# BR2_BINUTILS_VERSION_2_23_1 is not set
+BR2_BINUTILS_VERSION="2.21.1"
+BR2_BINUTILS_EXTRA_CONFIG_OPTIONS=""
+
+#
+# GCC Options
+#
+# BR2_GCC_VERSION_4_3_X is not set
+# BR2_GCC_VERSION_4_4_X is not set
+# BR2_GCC_VERSION_4_5_X is not set
+BR2_GCC_VERSION_4_6_X=y
+# BR2_GCC_VERSION_4_7_X is not set
+# BR2_GCC_VERSION_SNAP is not set
+BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE=y
+BR2_GCC_VERSION="4.6.3"
+BR2_EXTRA_GCC_CONFIG_OPTIONS=""
+# BR2_INSTALL_OBJC is not set
+# BR2_INSTALL_FORTRAN is not set
+BR2_GCC_SHARED_LIBGCC=y
+BR2_GCC_ENABLE_TLS=y
+# BR2_GCC_ENABLE_OPENMP is not set
+
+#
+# Gdb Options
+#
+# BR2_PACKAGE_GDB is not set
+# BR2_PACKAGE_GDB_SERVER is not set
+# BR2_PACKAGE_GDB_HOST is not set
+BR2_LARGEFILE=y
+BR2_TOOLCHAIN_HAS_NATIVE_RPC=y
+BR2_USE_WCHAR=y
+BR2_TOOLCHAIN_HAS_THREADS=y
+BR2_TOOLCHAIN_HAS_THREADS_DEBUG_IF_NEEDED=y
+BR2_TOOLCHAIN_HAS_SHADOW_PASSWORDS=y
+# BR2_ENABLE_LOCALE_PURGE is not set
+BR2_GENERATE_LOCALE=""
+BR2_NEEDS_GETTEXT=y
+BR2_USE_MMU=y
+BR2_PREFER_SOFT_FLOAT=y
+BR2_SOFT_FLOAT=y
+BR2_TARGET_OPTIMIZATION="-pipe"
+BR2_TARGET_LDFLAGS=""
+# BR2_ECLIPSE_REGISTER is not set
+
+#
+# Toolchain Options
+#
+BR2_TOOLCHAIN_BUILDROOT_LARGEFILE=y
+# BR2_TOOLCHAIN_BUILDROOT_INET_IPV6 is not set
+BR2_TOOLCHAIN_BUILDROOT_INET_RPC=y
+BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
+# BR2_TOOLCHAIN_BUILDROOT_LOCALE is not set
+# BR2_TOOLCHAIN_BUILDROOT_CXX is not set
+# BR2_TOOLCHAIN_BUILDROOT_USE_SSP is not set
+# BR2_PTHREADS_NONE is not set
+# BR2_PTHREADS is not set
+# BR2_PTHREADS_OLD is not set
+BR2_PTHREADS_NATIVE=y
+# BR2_ELF2FLT is not set
+
+#
+# System configuration
+#
+BR2_TARGET_GENERIC_HOSTNAME="buildroot"
+BR2_TARGET_GENERIC_ISSUE="Welcome to Gnublin"
+# BR2_TARGET_GENERIC_PASSWD_DES is not set
+# BR2_TARGET_GENERIC_PASSWD_MD5 is not set
+BR2_TARGET_GENERIC_PASSWD_SHA256=y
+# BR2_TARGET_GENERIC_PASSWD_SHA512 is not set
+BR2_TARGET_GENERIC_PASSWD_METHOD="sha-256"
+# BR2_ROOTFS_DEVICE_CREATION_STATIC is not set
+# BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS is not set
+# BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV is not set
+BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV=y
+BR2_INIT_BUSYBOX=y
+# BR2_INIT_SYSV is not set
+
+#
+# systemd requires largefile, wchar, IPv6, threads and udev support
+#
+# BR2_INIT_NONE is not set
+BR2_ROOTFS_DEVICE_TABLE="system/device_table.txt"
+BR2_ROOTFS_SKELETON_DEFAULT=y
+# BR2_ROOTFS_SKELETON_CUSTOM is not set
+BR2_TARGET_GENERIC_ROOT_PASSWD=""
+BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
+# BR2_TARGET_GENERIC_GETTY_BAUDRATE_KEEP is not set
+# BR2_TARGET_GENERIC_GETTY_BAUDRATE_9600 is not set
+# BR2_TARGET_GENERIC_GETTY_BAUDRATE_19200 is not set
+# BR2_TARGET_GENERIC_GETTY_BAUDRATE_38400 is not set
+# BR2_TARGET_GENERIC_GETTY_BAUDRATE_57600 is not set
+BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200=y
+BR2_TARGET_GENERIC_GETTY_BAUDRATE="115200"
+BR2_TARGET_GENERIC_GETTY_TERM="vt100"
+BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW=y
+BR2_ROOTFS_OVERLAY=""
+BR2_ROOTFS_POST_BUILD_SCRIPT=""
+
+#
+# Package Selection for the target
+#
+BR2_PACKAGE_BUSYBOX=y
+# BR2_BUSYBOX_VERSION_1_19_X is not set
+# BR2_BUSYBOX_VERSION_1_20_X is not set
+BR2_BUSYBOX_VERSION_1_21_X=y
+# BR2_PACKAGE_BUSYBOX_SNAPSHOT is not set
+BR2_BUSYBOX_VERSION="1.21.0"
+BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.21.x.config"
+# BR2_PACKAGE_BUSYBOX_SHOW_OTHERS is not set
+# BR2_PACKAGE_BUSYBOX_WATCHDOG is not set
+
+#
+# Audio and video applications
+#
+# BR2_PACKAGE_ALSA_UTILS is not set
+# BR2_PACKAGE_AUMIX is not set
+
+#
+# bellagio requires a toolchain with C++ support enabled
+#
+# BR2_PACKAGE_FAAD2 is not set
+# BR2_PACKAGE_FLAC is not set
+
+#
+# ffmpeg requires a toolchain with LARGEFILE and IPV6 support
+#
+# BR2_PACKAGE_GSTREAMER is not set
+
+#
+# gst-ffmpeg requires a toolchain with LARGEFILE and IPV6 support
+#
+# BR2_PACKAGE_LAME is not set
+# BR2_PACKAGE_MADPLAY is not set
+
+#
+# mpd requires a toolchain with C++ and WCHAR support
+#
+# BR2_PACKAGE_MPG123 is not set
+# BR2_PACKAGE_MPLAYER is not set
+# BR2_PACKAGE_MUSEPACK is not set
+# BR2_PACKAGE_OPUS_TOOLS is not set
+# BR2_PACKAGE_PULSEAUDIO is not set
+# BR2_PACKAGE_VORBIS_TOOLS is not set
+# BR2_PACKAGE_WAVPACK is not set
+# BR2_PACKAGE_YAVTA is not set
+
+#
+# Compressors and decompressors
+#
+# BR2_PACKAGE_BZIP2 is not set
+# BR2_PACKAGE_INFOZIP is not set
+# BR2_PACKAGE_LZOP is not set
+# BR2_PACKAGE_XZ is not set
+
+#
+# Debugging, profiling and benchmark
+#
+
+#
+# bonnie++ requires a toolchain with C++ support enabled
+#
+# BR2_PACKAGE_CACHE_CALIBRATOR is not set
+# BR2_PACKAGE_DHRYSTONE is not set
+# BR2_PACKAGE_DSTAT is not set
+# BR2_PACKAGE_DMALLOC is not set
+# BR2_PACKAGE_KEXEC is not set
+# BR2_PACKAGE_LATENCYTOP is not set
+# BR2_PACKAGE_LMBENCH is not set
+# BR2_PACKAGE_LTP_TESTSUITE is not set
+# BR2_PACKAGE_LTTNG_MODULES is not set
+# BR2_PACKAGE_LTRACE is not set
+# BR2_PACKAGE_MEMSTAT is not set
+# BR2_PACKAGE_NETPERF is not set
+
+#
+# oprofile requires a toolchain with C++ support enabled
+#
+# BR2_PACKAGE_PERF is not set
+# BR2_PACKAGE_RAMSPEED is not set
+# BR2_PACKAGE_RT_TESTS is not set
+# BR2_PACKAGE_STRACE is not set
+# BR2_PACKAGE_STRESS is not set
+# BR2_PACKAGE_WHETSTONE is not set
+# BR2_PACKAGE_PV is not set
+
+#
+# Development tools
+#
+# BR2_PACKAGE_BINUTILS is not set
+# BR2_PACKAGE_BISON is not set
+# BR2_PACKAGE_BSDIFF is not set
+# BR2_PACKAGE_CVS is not set
+# BR2_PACKAGE_DISTCC is not set
+# BR2_PACKAGE_FLEX is not set
+# BR2_PACKAGE_GETTEXT is not set
+# BR2_PACKAGE_GMP is not set
+
+#
+# gperf requires a toolchain with C++ support enabled
+#
+# BR2_PACKAGE_MPC is not set
+# BR2_PACKAGE_MPFR is not set
+# BR2_PACKAGE_LIBTOOL is not set
+# BR2_PACKAGE_M4 is not set
+# BR2_PACKAGE_PKGCONF is not set
+# BR2_PACKAGE_SSTRIP is not set
+# BR2_PACKAGE_VALA is not set
+
+#
+# Games
+#
+# BR2_PACKAGE_GNUCHESS is not set
+# BR2_PACKAGE_PRBOOM is not set
+
+#
+# Graphic libraries and applications (graphic/text)
+#
+
+#
+# Graphic applications
+#
+# BR2_PACKAGE_RRDTOOL is not set
+
+#
+# graphic libraries
+#
+
+#
+# cegui06 needs a toolchain with C++ and threads
+#
+# BR2_PACKAGE_DIRECTFB is not set
+# BR2_PACKAGE_FBDUMP is not set
+# BR2_PACKAGE_FBGRAB is not set
+
+#
+# fbterm requires a toolchain with C++, WCHAR and locale support
+#
+# BR2_PACKAGE_FBV is not set
+# BR2_PACKAGE_FB_TEST_APP is not set
+# BR2_PACKAGE_IMAGEMAGICK is not set
+# BR2_PACKAGE_LINUX_FUSION is not set
+# BR2_PACKAGE_SDL is not set
+
+#
+# other GUIs
+#
+# BR2_PACKAGE_EFL is not set
+
+#
+# qt requires a toolchain with C++ support enabled
+#
+# BR2_PACKAGE_XORG7 is not set
+
+#
+# X libraries and helper libraries
+#
+# BR2_PACKAGE_LIBERATION is not set
+
+#
+# X Window managers
+#
+
+#
+# X applications
+#
+# BR2_PACKAGE_GOB2 is not set
+
+#
+# midori requires C++, WCHAR in toolchain and libgtk2
+#
+
+#
+# Filesystem and flash utilities
+#
+# BR2_PACKAGE_CIFS_UTILS is not set
+# BR2_PACKAGE_CRAMFS is not set
+# BR2_PACKAGE_CURLFTPFS is not set
+# BR2_PACKAGE_DOSFSTOOLS is not set
+# BR2_PACKAGE_E2FSPROGS is not set
+# BR2_PACKAGE_FLASHBENCH is not set
+# BR2_PACKAGE_GENEXT2FS is not set
+# BR2_PACKAGE_GENROMFS is not set
+# BR2_PACKAGE_MAKEDEVS is not set
+# BR2_PACKAGE_MTD is not set
+# BR2_PACKAGE_NFS_UTILS is not set
+# BR2_PACKAGE_NTFS_3G is not set
+# BR2_PACKAGE_SQUASHFS is not set
+# BR2_PACKAGE_SSHFS is not set
+# BR2_PACKAGE_UNIONFS is not set
+# BR2_PACKAGE_XFSPROGS is not set
+
+#
+# Hardware handling
+#
+
+#
+# Misc devices firmwares
+#
+# BR2_PACKAGE_B43_FIRMWARE is not set
+# BR2_PACKAGE_FIRMWARE_IMX is not set
+# BR2_PACKAGE_LINUX_FIRMWARE is not set
+# BR2_PACKAGE_RPI_FIRMWARE is not set
+# BR2_PACKAGE_UX500_FIRMWARE is not set
+# BR2_PACKAGE_ZD1211_FIRMWARE is not set
+# BR2_PACKAGE_CDRKIT is not set
+# BR2_PACKAGE_DBUS is not set
+# BR2_PACKAGE_DMRAID is not set
+# BR2_PACKAGE_DVB_APPS is not set
+# BR2_PACKAGE_DVBSNOOP is not set
+# BR2_PACKAGE_EEPROG is not set
+# BR2_PACKAGE_EVTEST is not set
+# BR2_PACKAGE_FCONFIG is not set
+# BR2_PACKAGE_FIS is not set
+# BR2_PACKAGE_FMTOOLS is not set
+# BR2_PACKAGE_FXLOAD is not set
+# BR2_PACKAGE_GADGETFS_TEST is not set
+
+#
+# gdisk requires a toolchain with LARGEFILE/WCHAR/C++ support enabled
+#
+# BR2_PACKAGE_GPSD is not set
+# BR2_PACKAGE_GVFS is not set
+# BR2_PACKAGE_HWDATA is not set
+# BR2_PACKAGE_I2C_TOOLS is not set
+# BR2_PACKAGE_INPUT_EVENT_DAEMON is not set
+# BR2_PACKAGE_INPUT_TOOLS is not set
+# BR2_PACKAGE_IOSTAT is not set
+# BR2_PACKAGE_IRDA_UTILS is not set
+# BR2_PACKAGE_KBD is not set
+# BR2_PACKAGE_LCDPROC is not set
+# BR2_PACKAGE_LM_SENSORS is not set
+
+#
+# lshw requires a toolchain with C++, LARGEFILE & WCHAR support enabled
+#
+# BR2_PACKAGE_LSUIO is not set
+# BR2_PACKAGE_LVM2 is not set
+# BR2_PACKAGE_MDADM is not set
+# BR2_PACKAGE_MEDIA_CTL is not set
+# BR2_PACKAGE_MEMTESTER is not set
+# BR2_PACKAGE_MINICOM is not set
+# BR2_PACKAGE_NANOCOM is not set
+# BR2_PACKAGE_NEARD is not set
+# BR2_PACKAGE_OFONO is not set
+# BR2_PACKAGE_OPEN2300 is not set
+# BR2_PACKAGE_OPENOCD is not set
+# BR2_PACKAGE_OWL_LINUX is not set
+# BR2_PACKAGE_PARTED is not set
+# BR2_PACKAGE_PCIUTILS is not set
+# BR2_PACKAGE_PICOCOM is not set
+# BR2_PACKAGE_RNG_TOOLS is not set
+
+#
+# rpi-userland requires a toolchain with C++ and LARGEFILE support
+#
+# BR2_PACKAGE_SANE_BACKENDS is not set
+# BR2_PACKAGE_SDPARM is not set
+# BR2_PACKAGE_SETSERIAL is not set
+# BR2_PACKAGE_SG3_UTILS is not set
+
+#
+# smartmontools requires a toolchain with C++ support enabled
+#
+# BR2_PACKAGE_SNOWBALL_HDMISERVICE is not set
+# BR2_PACKAGE_SREDIRD is not set
+# BR2_PACKAGE_STATSERIAL is not set
+# BR2_PACKAGE_SYSSTAT is not set
+# BR2_PACKAGE_TI_UTILS is not set
+# BR2_PACKAGE_UBOOT_TOOLS is not set
+BR2_PACKAGE_UDEV=y
+# BR2_PACKAGE_UDEV_RULES_GEN is not set
+# BR2_PACKAGE_UDEV_ALL_EXTRAS is not set
+# BR2_PACKAGE_UDISKS is not set
+# BR2_PACKAGE_USB_MODESWITCH is not set
+# BR2_PACKAGE_USB_MODESWITCH_DATA is not set
+# BR2_PACKAGE_USBMOUNT is not set
+# BR2_PACKAGE_USBUTILS is not set
+# BR2_PACKAGE_WIPE is not set
+
+#
+# Interpreter languages and scripting
+#
+# BR2_PACKAGE_ERLANG is not set
+# BR2_PACKAGE_HASERL is not set
+
+#
+# jamvm requires a toolchain with IPV6 support
+#
+# BR2_PACKAGE_LUA is not set
+# BR2_PACKAGE_LUAJIT is not set
+# BR2_PACKAGE_PERL is not set
+# BR2_PACKAGE_PHP is not set
+# BR2_PACKAGE_PYTHON is not set
+# BR2_PACKAGE_PYTHON3 is not set
+# BR2_PACKAGE_RUBY is not set
+# BR2_PACKAGE_TCL is not set
+
+#
+# Libraries
+#
+
+#
+# Audio/Sound
+#
+# BR2_PACKAGE_ALSA_LIB is not set
+
+#
+# audiofile requires a toolchain with C++ support enabled
+#
+# BR2_PACKAGE_CELT051 is not set
+# BR2_PACKAGE_LIBAO is not set
+# BR2_PACKAGE_LIBCDAUDIO is not set
+# BR2_PACKAGE_LIBCUE is not set
+# BR2_PACKAGE_LIBCUEFILE is not set
+# BR2_PACKAGE_LIBID3TAG is not set
+# BR2_PACKAGE_LIBLO is not set
+# BR2_PACKAGE_LIBMAD is not set
+# BR2_PACKAGE_LIBMPD is not set
+# BR2_PACKAGE_LIBREPLAYGAIN is not set
+# BR2_PACKAGE_LIBSAMPLERATE is not set
+# BR2_PACKAGE_LIBSNDFILE is not set
+# BR2_PACKAGE_LIBVORBIS is not set
+# BR2_PACKAGE_OPUS is not set
+# BR2_PACKAGE_PORTAUDIO is not set
+# BR2_PACKAGE_SPEEX is not set
+
+#
+# taglib requires a toolchain with C++ support enabled
+#
+# BR2_PACKAGE_TREMOR is not set
+
+#
+# webrtc-audio-processing requires a toolchain with C++ support enabled
+#
+
+#
+# Compression and decompression
+#
+# BR2_PACKAGE_LIBARCHIVE is not set
+# BR2_PACKAGE_LZO is not set
+# BR2_PACKAGE_ZLIB is not set
+
+#
+# Crypto
+#
+# BR2_PACKAGE_BEECRYPT is not set
+# BR2_PACKAGE_GNUTLS is not set
+# BR2_PACKAGE_LIBGCRYPT is not set
+# BR2_PACKAGE_LIBGPG_ERROR is not set
+# BR2_PACKAGE_LIBMCRYPT is not set
+# BR2_PACKAGE_LIBMHASH is not set
+# BR2_PACKAGE_LIBNSS is not set
+# BR2_PACKAGE_LIBSHA1 is not set
+# BR2_PACKAGE_NETTLE is not set
+# BR2_PACKAGE_OCF_LINUX is not set
+# BR2_PACKAGE_OPENSSL is not set
+# BR2_PACKAGE_POLARSSL is not set
+
+#
+# Database
+#
+# BR2_PACKAGE_BERKELEYDB is not set
+# BR2_PACKAGE_GDBM is not set
+
+#
+# Mysql client requires a toolchain with C++ support enabled
+#
+# BR2_PACKAGE_SQLCIPHER is not set
+# BR2_PACKAGE_SQLITE is not set
+
+#
+# Filesystem
+#
+# BR2_PACKAGE_GAMIN is not set
+# BR2_PACKAGE_LIBCONFIG is not set
+# BR2_PACKAGE_LIBCONFUSE is not set
+# BR2_PACKAGE_LIBFUSE is not set
+# BR2_PACKAGE_LIBLOCKFILE is not set
+# BR2_PACKAGE_LIBSYSFS is not set
+
+#
+# Graphics
+#
+# BR2_PACKAGE_ATK is not set
+# BR2_PACKAGE_CAIRO is not set
+# BR2_PACKAGE_FONTCONFIG is not set
+# BR2_PACKAGE_FREETYPE is not set
+# BR2_PACKAGE_GD is not set
+# BR2_PACKAGE_IMLIB2 is not set
+# BR2_PACKAGE_JPEG is not set
+# BR2_PACKAGE_LIBART is not set
+# BR2_PACKAGE_LIBDMTX is not set
+# BR2_PACKAGE_LIBEXIF is not set
+# BR2_PACKAGE_LIBGEOTIFF is not set
+# BR2_PACKAGE_GDK_PIXBUF is not set
+
+#
+# libgtk2 requires a toolchain with WCHAR and C++ support
+#
+# BR2_PACKAGE_LIBPNG is not set
+
+#
+# libraw requires a toolchain with C++ support enabled
+#
+
+#
+# librsvg requires a toolchain with WCHAR and C++ support
+#
+# BR2_PACKAGE_LIBSVGTINY is not set
+# BR2_PACKAGE_LIBUNGIF is not set
+
+#
+# opencv requires a toolchain with C++ and WCHAR support
+#
+
+#
+# pango requires a toolchain with WCHAR and C++ support
+#
+# BR2_PACKAGE_PIXMAN is not set
+# BR2_PACKAGE_TIFF is not set
+
+#
+# webkit requires C++, WCHAR in toolchain and libgtk2
+#
+
+#
+# zxing requires a toolchain with C++ support
+#
+
+#
+# Hardware handling
+#
+# BR2_PACKAGE_CCID is not set
+# BR2_PACKAGE_IMX_LIB is not set
+
+#
+# lcdapi requires a toolchain with C++ and thread support enabled
+#
+# BR2_PACKAGE_LIBAIO is not set
+# BR2_PACKAGE_LIBATASMART is not set
+# BR2_PACKAGE_LIBRAW1394 is not set
+# BR2_PACKAGE_TSLIB is not set
+# BR2_PACKAGE_LIBFREEFARE is not set
+# BR2_PACKAGE_LIBFTDI is not set
+# BR2_PACKAGE_LIBHID is not set
+# BR2_PACKAGE_LIBIQRF is not set
+# BR2_PACKAGE_LIBNFC is not set
+# BR2_PACKAGE_LIBNFC_LLCP is not set
+# BR2_PACKAGE_LIBUSB is not set
+# BR2_PACKAGE_LIBV4L is not set
+# BR2_PACKAGE_MTDEV is not set
+# BR2_PACKAGE_NEARDAL is not set
+# BR2_PACKAGE_PCSC_LITE is not set
+
+#
+# Javascript
+#
+# BR2_PACKAGE_EXPLORERCANVAS is not set
+# BR2_PACKAGE_FLOT is not set
+# BR2_PACKAGE_JQUERY is not set
+# BR2_PACKAGE_JQUERY_SPARKLINE is not set
+# BR2_PACKAGE_JQUERY_VALIDATION is not set
+# BR2_PACKAGE_JSMIN is not set
+
+#
+# Multimedia
+#
+# BR2_PACKAGE_LIBDVDREAD is not set
+# BR2_PACKAGE_LIBDVDNAV is not set
+
+#
+# libebml requires a toolchain with C++ support
+#
+# BR2_PACKAGE_LIBFSLCODEC is not set
+# BR2_PACKAGE_LIBFSLPARSER is not set
+# BR2_PACKAGE_LIBFSLVPUWRAP is not set
+
+#
+# libmatroska requires a toolchain with C++ support
+#
+# BR2_PACKAGE_LIBMMS is not set
+# BR2_PACKAGE_LIBMPEG2 is not set
+# BR2_PACKAGE_LIBOGG is not set
+# BR2_PACKAGE_LIBPLAYER is not set
+# BR2_PACKAGE_LIBTHEORA is not set
+
+#
+# Live555 needs C++ compiler
+#
+
+#
+# mediastreamer requires a toolchain with threads and C++ support
+#
+
+#
+# Networking
+#
+# BR2_PACKAGE_GLIB_NETWORKING is not set
+# BR2_PACKAGE_LIBCGI is not set
+
+#
+# libcgicc requires a toolchain with C++ support enabled
+#
+# BR2_PACKAGE_LIBCURL is not set
+# BR2_PACKAGE_LIBDNET is not set
+# BR2_PACKAGE_LIBESMTP is not set
+# BR2_PACKAGE_LIBEXOSIP2 is not set
+# BR2_PACKAGE_LIBFCGI is not set
+# BR2_PACKAGE_LIBGSASL is not set
+# BR2_PACKAGE_LIBIDN is not set
+# BR2_PACKAGE_LIBISCSI is not set
+# BR2_PACKAGE_LIBOAUTH is not set
+# BR2_PACKAGE_LIBMICROHTTPD is not set
+# BR2_PACKAGE_NEON is not set
+# BR2_PACKAGE_LIBMNL is not set
+# BR2_PACKAGE_LIBMODBUS is not set
+# BR2_PACKAGE_LIBMBUS is not set
+# BR2_PACKAGE_LIBNETFILTER_ACCT is not set
+# BR2_PACKAGE_LIBNETFILTER_CONNTRACK is not set
+# BR2_PACKAGE_LIBNETFILTER_CTHELPER is not set
+# BR2_PACKAGE_LIBNETFILTER_CTTIMEOUT is not set
+# BR2_PACKAGE_LIBNETFILTER_LOG is not set
+# BR2_PACKAGE_LIBNFNETLINK is not set
+# BR2_PACKAGE_LIBNL is not set
+
+#
+# liboping requires a toolchain with IPv6 support enabled
+#
+# BR2_PACKAGE_LIBPCAP is not set
+# BR2_PACKAGE_LIBOSIP2 is not set
+# BR2_PACKAGE_LIBRSYNC is not set
+# BR2_PACKAGE_LIBSOUP is not set
+# BR2_PACKAGE_LIBTIRPC is not set
+
+#
+# libtorrent requires a toolchain with C++ support enabled
+#
+# BR2_PACKAGE_LIBUPNP is not set
+# BR2_PACKAGE_LIBVNCSERVER is not set
+# BR2_PACKAGE_ORTP is not set
+# BR2_PACKAGE_SLIRP is not set
+# BR2_PACKAGE_USBREDIR is not set
+
+#
+# zeromq requires a toolchain with C++, LARGEFILE + WCHAR support
+#
+
+#
+# Other
+#
+# BR2_PACKAGE_APR is not set
+# BR2_PACKAGE_APR_UTIL is not set
+# BR2_PACKAGE_LIBCOFI is not set
+
+#
+# classpath requires a toolchain with IPV6 support
+#
+# BR2_PACKAGE_ELFUTILS is not set
+# BR2_PACKAGE_FFTW is not set
+# BR2_PACKAGE_LIBARGTABLE2 is not set
+# BR2_PACKAGE_ARGP_STANDALONE is not set
+
+#
+# boost requires a toolchain with C++, large file and thread support enabled
+#
+# BR2_PACKAGE_LIBATOMIC_OPS is not set
+# BR2_PACKAGE_LIBCAP is not set
+# BR2_PACKAGE_LIBCAP_NG is not set
+# BR2_PACKAGE_LIBDAEMON is not set
+# BR2_PACKAGE_LIBELF is not set
+# BR2_PACKAGE_LIBEVENT is not set
+# BR2_PACKAGE_LIBEV is not set
+BR2_PACKAGE_LIBFFI=y
+# BR2_PACKAGE_GSL is not set
+# BR2_PACKAGE_LIBGLIB2 is not set
+# BR2_PACKAGE_LIBICAL is not set
+# BR2_PACKAGE_LIBNSPR is not set
+
+#
+# libsigc++ requires a toolchain with C++ support enabled
+#
+# BR2_PACKAGE_LIBTPL is not set
+# BR2_PACKAGE_LIBURCU is not set
+
+#
+# linux-pam requires a toolchain with WCHAR and locale support
+#
+# BR2_PACKAGE_LTTNG_LIBUST is not set
+# BR2_PACKAGE_MTDEV2TUIO is not set
+# BR2_PACKAGE_ORC is not set
+
+#
+# poco requires a toolchain with WCHAR and C++ support
+#
+
+#
+# protobuf requires a toolchain with C++ support enabled
+#
+
+#
+# schifra requires a toolchain with C++ support enabled
+#
+# BR2_PACKAGE_LIBLOG4C_LOCALTIME is not set
+
+#
+# Text and terminal handling
+#
+
+#
+# enchant requires a toolchain with C++ and WCHAR support enabled
+#
+# BR2_PACKAGE_LIBFRIBIDI is not set
+
+#
+# icu requires a toolchain with C++ support and WCHAR enabled
+#
+# BR2_PACKAGE_LIBICONV is not set
+# BR2_PACKAGE_LINENOISE is not set
+BR2_PACKAGE_NCURSES=y
+# BR2_PACKAGE_NCURSES_TARGET_PANEL is not set
+# BR2_PACKAGE_NCURSES_TARGET_FORM is not set
+# BR2_PACKAGE_NCURSES_TARGET_MENU is not set
+# BR2_PACKAGE_NEWT is not set
+# BR2_PACKAGE_PCRE is not set
+# BR2_PACKAGE_POPT is not set
+# BR2_PACKAGE_READLINE is not set
+# BR2_PACKAGE_SLANG is not set
+
+#
+# JSON/XML
+#
+# BR2_PACKAGE_CJSON is not set
+# BR2_PACKAGE_EXPAT is not set
+# BR2_PACKAGE_EZXML is not set
+# BR2_PACKAGE_JSON_C is not set
+# BR2_PACKAGE_LIBROXML is not set
+# BR2_PACKAGE_LIBXML2 is not set
+# BR2_PACKAGE_LIBXSLT is not set
+# BR2_PACKAGE_LIBYAML is not set
+# BR2_PACKAGE_MXML is not set
+
+#
+# xerces-c++ requires a toolchain with C++ and WCHAR support enabled
+#
+# BR2_PACKAGE_YAJL is not set
+
+#
+# Miscellaneous
+#
+# BR2_PACKAGE_COLLECTD is not set
+# BR2_PACKAGE_EMPTY is not set
+# BR2_PACKAGE_GOOGLEFONTDIRECTORY is not set
+# BR2_PACKAGE_MCRYPT is not set
+# BR2_PACKAGE_MOBILE_BROADBAND_PROVIDER_INFO is not set
+# BR2_PACKAGE_SHARED_MIME_INFO is not set
+# BR2_PACKAGE_SNOWBALL_INIT is not set
+# BR2_PACKAGE_SOUND_THEME_BOREALIS is not set
+# BR2_PACKAGE_SOUND_THEME_FREEDESKTOP is not set
+
+#
+# Networking applications
+#
+# BR2_PACKAGE_ARGUS is not set
+# BR2_PACKAGE_ARPTABLES is not set
+# BR2_PACKAGE_AVAHI is not set
+# BR2_PACKAGE_AXEL is not set
+# BR2_PACKAGE_BLUEZ_UTILS is not set
+# BR2_PACKAGE_BOA is not set
+
+#
+# bmon requires a toolchain with IPv6 support
+#
+# BR2_PACKAGE_BRIDGE_UTILS is not set
+# BR2_PACKAGE_CAN_UTILS is not set
+
+#
+# connman needs a toolchain with IPv6, WCHAR, thread and resolver support
+#
+
+#
+# ctorrent requires a toolchain with C++ support enabled
+#
+
+#
+# conntrack-tools requires a toolchain with IPV6 and LARGEFILE support
+#
+# BR2_PACKAGE_CUPS is not set
+# BR2_PACKAGE_DHCPDUMP is not set
+# BR2_PACKAGE_DNSMASQ is not set
+# BR2_PACKAGE_DROPBEAR is not set
+
+#
+# ebtables requires a toolchain with IPv6 support
+#
+# BR2_PACKAGE_ETHTOOL is not set
+# BR2_PACKAGE_HEIRLOOM_MAILX is not set
+# BR2_PACKAGE_HIAWATHA is not set
+# BR2_PACKAGE_HOSTAPD is not set
+# BR2_PACKAGE_HTTPING is not set
+
+#
+# iftop requires IPv6 and threads support in toolchain
+#
+# BR2_PACKAGE_IGH_ETHERCAT is not set
+# BR2_PACKAGE_INADYN is not set
+
+#
+# iperf requires a toolchain with C++ support enabled
+#
+# BR2_PACKAGE_IPROUTE2 is not set
+# BR2_PACKAGE_IPSEC_TOOLS is not set
+# BR2_PACKAGE_IPSET is not set
+# BR2_PACKAGE_IPTABLES is not set
+# BR2_PACKAGE_IW is not set
+# BR2_PACKAGE_GESFTPSERVER is not set
+
+#
+# Kismet requires a toolchain with C++ support enabled
+#
+# BR2_PACKAGE_LIGHTTPD is not set
+# BR2_PACKAGE_LINKS is not set
+
+#
+# linphone requires a toolchain with threads and C++ support enabled
+#
+# BR2_PACKAGE_LRZSZ is not set
+# BR2_PACKAGE_MACCHANGER is not set
+# BR2_PACKAGE_MII_DIAG is not set
+# BR2_PACKAGE_MROUTED is not set
+# BR2_PACKAGE_MSMTP is not set
+# BR2_PACKAGE_MUTT is not set
+# BR2_PACKAGE_NBD is not set
+# BR2_PACKAGE_NCFTP is not set
+
+#
+# ndisc6 requires a toolchain with IPv6 support
+#
+# BR2_PACKAGE_NETATALK is not set
+# BR2_PACKAGE_NETPLUG is not set
+# BR2_PACKAGE_NETSNMP is not set
+# BR2_PACKAGE_NETSTAT_NAT is not set
+
+#
+# NetworkManager requires a toolchain with IPV6, LARGEFILE, WCHAR and thread support
+#
+# BR2_PACKAGE_NFACCT is not set
+# BR2_PACKAGE_NOIP is not set
+# BR2_PACKAGE_NGIRCD is not set
+# BR2_PACKAGE_NGREP is not set
+# BR2_PACKAGE_NTP is not set
+# BR2_PACKAGE_NUTTCP is not set
+
+#
+# olsr requires a toolchain with IPv6 and threads support
+#
+# BR2_PACKAGE_OPENNTPD is not set
+# BR2_PACKAGE_OPENSSH is not set
+# BR2_PACKAGE_OPENSWAN is not set
+
+#
+# openvpn requires a toolchain with IPV6 support
+#
+# BR2_PACKAGE_PORTMAP is not set
+# BR2_PACKAGE_PPPD is not set
+# BR2_PACKAGE_PPTP_LINUX is not set
+# BR2_PACKAGE_PROFTPD is not set
+# BR2_PACKAGE_PROXYCHAINS_NG is not set
+# BR2_PACKAGE_QUAGGA is not set
+
+#
+# radvd requires a toolchain with IPV6 support
+#
+# BR2_PACKAGE_RPCBIND is not set
+# BR2_PACKAGE_RSH_REDONE is not set
+# BR2_PACKAGE_RSYNC is not set
+
+#
+# rtorrent requires a toolchain with C++ and WCHAR support
+#
+# BR2_PACKAGE_SAMBA is not set
+
+#
+# sconeserver requires a toolchain with C++ support enabled
+#
+# BR2_PACKAGE_SER2NET is not set
+# BR2_PACKAGE_SOCAT is not set
+# BR2_PACKAGE_SOCKETCAND is not set
+# BR2_PACKAGE_SPAWN_FCGI is not set
+# BR2_PACKAGE_SPICE_PROTOCOL is not set
+
+#
+# Squid requires a toolchain with C++ and IPv6 support enabled
+#
+# BR2_PACKAGE_STUNNEL is not set
+# BR2_PACKAGE_TCPDUMP is not set
+# BR2_PACKAGE_TCPREPLAY is not set
+# BR2_PACKAGE_THTTPD is not set
+# BR2_PACKAGE_TINYHTTPD is not set
+# BR2_PACKAGE_TN5250 is not set
+
+#
+# Transmission requires a toolchain with IPv6 and threads support
+#
+
+#
+# tvheadend requires a toolchain with LARGEFILE and IPv6 support
+#
+# BR2_PACKAGE_UDPCAST is not set
+
+#
+# ulogd requires a toolchain with IPV6 and LARGEFILE support
+#
+# BR2_PACKAGE_USHARE is not set
+# BR2_PACKAGE_VDE2 is not set
+# BR2_PACKAGE_VPNC is not set
+# BR2_PACKAGE_VSFTPD is not set
+# BR2_PACKAGE_VTUN is not set
+# BR2_PACKAGE_WIRELESS_TOOLS is not set
+# BR2_PACKAGE_WPA_SUPPLICANT is not set
+# BR2_PACKAGE_XINETD is not set
+# BR2_PACKAGE_XL2TP is not set
+
+#
+# Package managers
+#
+# BR2_PACKAGE_IPKG is not set
+# BR2_PACKAGE_OPKG is not set
+
+#
+# Real-Time
+#
+# BR2_PACKAGE_XENOMAI is not set
+
+#
+# Shell and utilities
+#
+# BR2_PACKAGE_AT is not set
+# BR2_PACKAGE_DIALOG is not set
+# BR2_PACKAGE_FILE is not set
+# BR2_PACKAGE_GNUPG is not set
+# BR2_PACKAGE_INOTIFY_TOOLS is not set
+# BR2_PACKAGE_LOCKFILE_PROGS is not set
+# BR2_PACKAGE_LOGROTATE is not set
+# BR2_PACKAGE_LOGSURFER is not set
+# BR2_PACKAGE_SCREEN is not set
+# BR2_PACKAGE_SUDO is not set
+# BR2_PACKAGE_XMLSTARLET is not set
+
+#
+# System tools
+#
+# BR2_PACKAGE_ACL is not set
+# BR2_PACKAGE_ATTR is not set
+# BR2_PACKAGE_BWM_NG is not set
+# BR2_PACKAGE_CPULOAD is not set
+# BR2_PACKAGE_HTOP is not set
+# BR2_PACKAGE_KEYUTILS is not set
+BR2_PACKAGE_KMOD=y
+# BR2_PACKAGE_MONIT is not set
+# BR2_PACKAGE_NCDU is not set
+# BR2_PACKAGE_POLKIT is not set
+# BR2_PACKAGE_QUOTA is not set
+
+#
+# supervisor needs the python interpreter
+#
+
+#
+# systemd not available (depends on /dev management with udev and ipv6 support, and thread support in toolchain)
+#
+BR2_PACKAGE_UTIL_LINUX=y
+# BR2_PACKAGE_UTIL_LINUX_MOUNT is not set
+# BR2_PACKAGE_UTIL_LINUX_FSCK is not set
+# BR2_PACKAGE_UTIL_LINUX_LIBMOUNT is not set
+BR2_PACKAGE_UTIL_LINUX_LIBUUID=y
+# BR2_PACKAGE_UTIL_LINUX_UUIDD is not set
+BR2_PACKAGE_UTIL_LINUX_LIBBLKID=y
+# BR2_PACKAGE_UTIL_LINUX_AGETTY is not set
+# BR2_PACKAGE_UTIL_LINUX_CRAMFS is not set
+# BR2_PACKAGE_UTIL_LINUX_SWITCH_ROOT is not set
+# BR2_PACKAGE_UTIL_LINUX_PIVOT_ROOT is not set
+# BR2_PACKAGE_UTIL_LINUX_FALLOCATE is not set
+# BR2_PACKAGE_UTIL_LINUX_UNSHARE is not set
+# BR2_PACKAGE_UTIL_LINUX_RENAME is not set
+# BR2_PACKAGE_UTIL_LINUX_SCHEDUTILS is not set
+# BR2_PACKAGE_UTIL_LINUX_WALL is not set
+# BR2_PACKAGE_UTIL_LINUX_PARTX is not set
+# BR2_PACKAGE_UTIL_LINUX_ARCH is not set
+# BR2_PACKAGE_UTIL_LINUX_INIT is not set
+# BR2_PACKAGE_UTIL_LINUX_KILL is not set
+# BR2_PACKAGE_UTIL_LINUX_LAST is not set
+# BR2_PACKAGE_UTIL_LINUX_MESG is not set
+# BR2_PACKAGE_UTIL_LINUX_RAW is not set
+# BR2_PACKAGE_UTIL_LINUX_RESET is not set
+# BR2_PACKAGE_UTIL_LINUX_LOGIN_UTILS is not set
+# BR2_PACKAGE_UTIL_LINUX_WRITE is not set
+
+#
+# Text editors and viewers
+#
+# BR2_PACKAGE_ED is not set
+# BR2_PACKAGE_NANO is not set
+# BR2_PACKAGE_UEMACS is not set
+
+#
+# Host utilities
+#
+# BR2_PACKAGE_HOST_DFU_UTIL is not set
+# BR2_PACKAGE_HOST_LPC3250LOADER is not set
+# BR2_PACKAGE_HOST_OMAP_U_BOOT_UTILS is not set
+# BR2_PACKAGE_HOST_OPENOCD is not set
+# BR2_PACKAGE_HOST_SAM_BA is not set
+BR2_PACKAGE_HOST_UBOOT_TOOLS=y
+
+#
+# Filesystem images
+#
+# BR2_TARGET_ROOTFS_CLOOP is not set
+# BR2_TARGET_ROOTFS_CPIO is not set
+# BR2_TARGET_ROOTFS_CRAMFS is not set
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_BLOCKS=512000
+BR2_TARGET_ROOTFS_EXT2_INODES=0
+BR2_TARGET_ROOTFS_EXT2_RESBLKS=0
+BR2_TARGET_ROOTFS_EXT2_NONE=y
+# BR2_TARGET_ROOTFS_EXT2_GZIP is not set
+# BR2_TARGET_ROOTFS_EXT2_BZIP2 is not set
+# BR2_TARGET_ROOTFS_EXT2_LZMA is not set
+# BR2_TARGET_ROOTFS_INITRAMFS is not set
+# BR2_TARGET_ROOTFS_JFFS2 is not set
+# BR2_TARGET_ROOTFS_ROMFS is not set
+# BR2_TARGET_ROOTFS_SQUASHFS is not set
+BR2_TARGET_ROOTFS_TAR=y
+BR2_TARGET_ROOTFS_TAR_NONE=y
+# BR2_TARGET_ROOTFS_TAR_GZIP is not set
+# BR2_TARGET_ROOTFS_TAR_BZIP2 is not set
+# BR2_TARGET_ROOTFS_TAR_LZMA is not set
+BR2_TARGET_ROOTFS_TAR_OPTIONS=""
+# BR2_TARGET_ROOTFS_UBIFS is not set
+
+#
+# Bootloaders
+#
+# BR2_TARGET_AT91BOOTSTRAP is not set
+# BR2_TARGET_AT91BOOTSTRAP3 is not set
+# BR2_TARGET_AT91DATAFLASHBOOT is not set
+# BR2_TARGET_BAREBOX is not set
+# BR2_TARGET_LPC32XXCDL is not set
+# BR2_TARGET_MXS_BOOTLETS is not set
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="GNUBLIN"
+# BR2_TARGET_UBOOT_2013_01 is not set
+# BR2_TARGET_UBOOT_2012_10 is not set
+# BR2_TARGET_UBOOT_2012_07 is not set
+# BR2_TARGET_UBOOT_2012_04 is not set
+# BR2_TARGET_UBOOT_2011_12 is not set
+# BR2_TARGET_UBOOT_CUSTOM_TARBALL is not set
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_VERSION="2009.11_gnublin_support_v2"
+BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR=""
+BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL="git://gitorious.org/u-boot-gnublin-support/u-boot-gnublin-support.git"
+BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION="2009.11_gnublin_support_v2"
+# BR2_TARGET_UBOOT_FORMAT_AIS is not set
+BR2_TARGET_UBOOT_FORMAT_BIN=y
+# BR2_TARGET_UBOOT_FORMAT_IMG is not set
+# BR2_TARGET_UBOOT_FORMAT_NAND_BIN is not set
+# BR2_TARGET_UBOOT_FORMAT_KWB is not set
+# BR2_TARGET_UBOOT_OMAP_IFT is not set
+# BR2_TARGET_UBOOT_NETWORK is not set
+# BR2_TARGET_UBOOT_SPL is not set
+
+#
+# Kernel
+#
+BR2_LINUX_KERNEL=y
+# BR2_LINUX_KERNEL_3_7 is not set
+# BR2_LINUX_KERNEL_SAME_AS_HEADERS is not set
+# BR2_LINUX_KERNEL_CUSTOM_VERSION is not set
+# BR2_LINUX_KERNEL_CUSTOM_TARBALL is not set
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://gitorious.org/linux-3-7-gnublin/linux-3-7-gnublin.git"
+BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="gnublin_support_v1"
+BR2_LINUX_KERNEL_VERSION="gnublin_support_v1"
+BR2_LINUX_KERNEL_PATCH=""
+# BR2_LINUX_KERNEL_USE_DEFCONFIG is not set
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/gnublin/gnublin_kernel_config"
+BR2_LINUX_KERNEL_UBOOT_IMAGE=y
+BR2_LINUX_KERNEL_UIMAGE=y
+# BR2_LINUX_KERNEL_APPENDED_UIMAGE is not set
+# BR2_LINUX_KERNEL_ZIMAGE is not set
+# BR2_LINUX_KERNEL_APPENDED_ZIMAGE is not set
+# BR2_LINUX_KERNEL_VMLINUX is not set
+# BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM is not set
+# BR2_LINUX_KERNEL_DTS_SUPPORT is not set
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+
+#
+# Linux Kernel Extensions
+#
+# BR2_LINUX_KERNEL_EXT_XENOMAI is not set
+# BR2_LINUX_KERNEL_EXT_OCF_LINUX is not set
+# BR2_LINUX_KERNEL_EXT_RTAI is not set
+
+#
+# Legacy config options
+#
+# BR2_PACKAGE_XSERVER_xorg is not set
+# BR2_PACKAGE_XSERVER_tinyx is not set
+# BR2_PACKAGE_PTHREAD_STUBS is not set
+# BR2_PACKAGE_GETTEXT_STATIC is not set
+# BR2_PACKAGE_LIBINTL is not set
+# BR2_PACKAGE_INPUT_TOOLS_EVTEST is not set