Patchwork [U-Boot,2/2] SPL: ONENAND: Support SPL to boot u-boot from OneNAND.

login
register
mail settings
Submitter Enric Balletbò i Serra
Date Feb. 5, 2013, 9:23 a.m.
Message ID <1360056181-10066-2-git-send-email-eballetbo@gmail.com>
Download mbox | patch
Permalink /patch/218202/
State Superseded
Delegated to: Tom Rini
Headers show

Comments

Enric Balletbò i Serra - Feb. 5, 2013, 9:23 a.m.
From: Enric Balletbo i Serra <eballetbo@iseebcn.com>

This patch will allow use SPL to boot an u-boot from the OneNAND.

Tested with IGEPv2 board with a OneNAND from Numonyx.

Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
---
 arch/arm/cpu/armv7/omap3/board.c |    2 +-
 common/spl/Makefile              |    1 +
 common/spl/spl.c                 |    5 +++++
 common/spl/spl_onenand.c         |   45 ++++++++++++++++++++++++++++++++++++++
 4 files changed, 52 insertions(+), 1 deletion(-)
 create mode 100644 common/spl/spl_onenand.c
Kyungmin Park - Feb. 5, 2013, 1:25 p.m.
Hi,

On Tue, Feb 5, 2013 at 6:23 PM, Enric Balletbo i Serra
<eballetbo@gmail.com> wrote:
> From: Enric Balletbo i Serra <eballetbo@iseebcn.com>
>
> This patch will allow use SPL to boot an u-boot from the OneNAND.
>
> Tested with IGEPv2 board with a OneNAND from Numonyx.
>
> Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
> ---
>  arch/arm/cpu/armv7/omap3/board.c |    2 +-
It's not related with OneNAND SPL patch, can you split it two patches?
>  common/spl/Makefile              |    1 +
>  common/spl/spl.c                 |    5 +++++
>  common/spl/spl_onenand.c         |   45 ++++++++++++++++++++++++++++++++++++++
>  4 files changed, 52 insertions(+), 1 deletion(-)
>  create mode 100644 common/spl/spl_onenand.c
>
> diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
> index 89c587e..63063c8 100644
> --- a/arch/arm/cpu/armv7/omap3/board.c
> +++ b/arch/arm/cpu/armv7/omap3/board.c
> @@ -110,7 +110,7 @@ int board_mmc_init(bd_t *bis)
>
>  void spl_board_init(void)
>  {
> -#ifdef CONFIG_SPL_NAND_SUPPORT
> +#if defined(CONFIG_SPL_NAND_SUPPORT) || defined(CONFIG_SPL_ONENAND_SUPPORT)
>         gpmc_init();
>  #endif
>  #ifdef CONFIG_SPL_I2C_SUPPORT
> diff --git a/common/spl/Makefile b/common/spl/Makefile
> index 5698a23..da2afc1 100644
> --- a/common/spl/Makefile
> +++ b/common/spl/Makefile
> @@ -18,6 +18,7 @@ COBJS-$(CONFIG_SPL_FRAMEWORK) += spl.o
>  COBJS-$(CONFIG_SPL_NOR_SUPPORT) += spl_nor.o
>  COBJS-$(CONFIG_SPL_YMODEM_SUPPORT) += spl_ymodem.o
>  COBJS-$(CONFIG_SPL_NAND_SUPPORT) += spl_nand.o
> +COBJS-$(CONFIG_SPL_ONENAND_SUPPORT) += spl_onenand.o
>  COBJS-$(CONFIG_SPL_NET_SUPPORT) += spl_net.o
>  endif
>
> diff --git a/common/spl/spl.c b/common/spl/spl.c
> index ff9ba7b..c584247 100644
> --- a/common/spl/spl.c
> +++ b/common/spl/spl.c
> @@ -197,6 +197,11 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
>                 spl_nand_load_image();
>                 break;
>  #endif
> +#ifdef CONFIG_SPL_ONENAND_SUPPORT
> +       case BOOT_DEVICE_ONE_NAND:
ONE_NAND? It should be ONENAND.
> +               spl_onenand_load_image();
> +               break;
> +#endif
>  #ifdef CONFIG_SPL_NOR_SUPPORT
>         case BOOT_DEVICE_NOR:
>                 spl_nor_load_image();
> diff --git a/common/spl/spl_onenand.c b/common/spl/spl_onenand.c
> new file mode 100644
> index 0000000..247f97b
> --- /dev/null
> +++ b/common/spl/spl_onenand.c
> @@ -0,0 +1,45 @@
> +/*
> + * Copyright (C) 2011
> + * Corscience GmbH & Co. KG - Simon Schwarz <schwarz@corscience.de>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +#include <common.h>
> +#include <config.h>
> +#include <spl.h>
> +#include <asm/io.h>
> +#include <onenand_uboot.h>
> +
> +void spl_onenand_load_image(void)
> +{
> +       struct image_header *header;
> +       int *src __attribute__((unused));
> +       int *dst __attribute__((unused));
why these are needed? just remove these.

Thank you,
Kyungmin Park
> +
> +       debug("spl: onenand\n");
> +
> +       /*use CONFIG_SYS_TEXT_BASE as temporary storage area */
> +       header = (struct image_header *)(CONFIG_SYS_TEXT_BASE);
> +       /* Load u-boot */
> +       onenand_spl_load_image(CONFIG_SYS_ONENAND_U_BOOT_OFFS,
> +               CONFIG_SYS_ONENAND_PAGE_SIZE, (void *)header);
> +       spl_parse_image_header(header);
> +       onenand_spl_load_image(CONFIG_SYS_ONENAND_U_BOOT_OFFS,
> +               spl_image.size, (void *)spl_image.load_addr);
> +}
> --
> 1.7.10.4
>
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
Enric Balletbò i Serra - Feb. 5, 2013, 2:38 p.m.
Hi Kyungmin,

Thanks for revisit the patch.

2013/2/5 Kyungmin Park <kmpark@infradead.org>:
> Hi,
>
> On Tue, Feb 5, 2013 at 6:23 PM, Enric Balletbo i Serra
> <eballetbo@gmail.com> wrote:
>> From: Enric Balletbo i Serra <eballetbo@iseebcn.com>
>>
>> This patch will allow use SPL to boot an u-boot from the OneNAND.
>>
>> Tested with IGEPv2 board with a OneNAND from Numonyx.
>>
>> Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
>> ---
>>  arch/arm/cpu/armv7/omap3/board.c |    2 +-
> It's not related with OneNAND SPL patch, can you split it two patches?

Ok, I'll do in v2.

>>  common/spl/Makefile              |    1 +
>>  common/spl/spl.c                 |    5 +++++
>>  common/spl/spl_onenand.c         |   45 ++++++++++++++++++++++++++++++++++++++
>>  4 files changed, 52 insertions(+), 1 deletion(-)
>>  create mode 100644 common/spl/spl_onenand.c
>>
>> diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
>> index 89c587e..63063c8 100644
>> --- a/arch/arm/cpu/armv7/omap3/board.c
>> +++ b/arch/arm/cpu/armv7/omap3/board.c
>> @@ -110,7 +110,7 @@ int board_mmc_init(bd_t *bis)
>>
>>  void spl_board_init(void)
>>  {
>> -#ifdef CONFIG_SPL_NAND_SUPPORT
>> +#if defined(CONFIG_SPL_NAND_SUPPORT) || defined(CONFIG_SPL_ONENAND_SUPPORT)
>>         gpmc_init();
>>  #endif
>>  #ifdef CONFIG_SPL_I2C_SUPPORT
>> diff --git a/common/spl/Makefile b/common/spl/Makefile
>> index 5698a23..da2afc1 100644
>> --- a/common/spl/Makefile
>> +++ b/common/spl/Makefile
>> @@ -18,6 +18,7 @@ COBJS-$(CONFIG_SPL_FRAMEWORK) += spl.o
>>  COBJS-$(CONFIG_SPL_NOR_SUPPORT) += spl_nor.o
>>  COBJS-$(CONFIG_SPL_YMODEM_SUPPORT) += spl_ymodem.o
>>  COBJS-$(CONFIG_SPL_NAND_SUPPORT) += spl_nand.o
>> +COBJS-$(CONFIG_SPL_ONENAND_SUPPORT) += spl_onenand.o
>>  COBJS-$(CONFIG_SPL_NET_SUPPORT) += spl_net.o
>>  endif
>>
>> diff --git a/common/spl/spl.c b/common/spl/spl.c
>> index ff9ba7b..c584247 100644
>> --- a/common/spl/spl.c
>> +++ b/common/spl/spl.c
>> @@ -197,6 +197,11 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
>>                 spl_nand_load_image();
>>                 break;
>>  #endif
>> +#ifdef CONFIG_SPL_ONENAND_SUPPORT
>> +       case BOOT_DEVICE_ONE_NAND:
> ONE_NAND? It should be ONENAND.

Well, I used ONE_NAND because this define was already defined in

arch/arm/include/asm/arch-omap3/spl.h:29:#define BOOT_DEVICE_ONE_NAND   3
arch/arm/include/asm/arch-omap5/spl.h:30:#define BOOT_DEVICE_ONE_NAND    4
arch/arm/include/asm/arch-omap4/spl.h:30:#define BOOT_DEVICE_ONE_NAND   4
arch/arm/include/asm/arch-mx35/spl.h:30:#define BOOT_DEVICE_ONE_NAND    4

For me, also looks better use ONENAND, but then, I need to change all
these defines. What do you prefer ? Maintain the use of ONE_NAND or
change these defines ?

>> +               spl_onenand_load_image();
>> +               break;
>> +#endif
>>  #ifdef CONFIG_SPL_NOR_SUPPORT
>>         case BOOT_DEVICE_NOR:
>>                 spl_nor_load_image();
>> diff --git a/common/spl/spl_onenand.c b/common/spl/spl_onenand.c
>> new file mode 100644
>> index 0000000..247f97b
>> --- /dev/null
>> +++ b/common/spl/spl_onenand.c
>> @@ -0,0 +1,45 @@
>> +/*
>> + * Copyright (C) 2011
>> + * Corscience GmbH & Co. KG - Simon Schwarz <schwarz@corscience.de>
>> + *
>> + * See file CREDITS for list of people who contributed to this
>> + * project.
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation; either version 2 of
>> + * the License, or (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>> + * MA 02111-1307 USA
>> + */
>> +#include <common.h>
>> +#include <config.h>
>> +#include <spl.h>
>> +#include <asm/io.h>
>> +#include <onenand_uboot.h>
>> +
>> +void spl_onenand_load_image(void)
>> +{
>> +       struct image_header *header;
>> +       int *src __attribute__((unused));
>> +       int *dst __attribute__((unused));
> why these are needed? just remove these.
>

Right, I'll remove.

> Thank you,
> Kyungmin Park
>> +
>> +       debug("spl: onenand\n");
>> +
>> +       /*use CONFIG_SYS_TEXT_BASE as temporary storage area */
>> +       header = (struct image_header *)(CONFIG_SYS_TEXT_BASE);
>> +       /* Load u-boot */
>> +       onenand_spl_load_image(CONFIG_SYS_ONENAND_U_BOOT_OFFS,
>> +               CONFIG_SYS_ONENAND_PAGE_SIZE, (void *)header);
>> +       spl_parse_image_header(header);
>> +       onenand_spl_load_image(CONFIG_SYS_ONENAND_U_BOOT_OFFS,
>> +               spl_image.size, (void *)spl_image.load_addr);
>> +}
>> --
>> 1.7.10.4
>>
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot@lists.denx.de
>> http://lists.denx.de/mailman/listinfo/u-boot

Thanks,
  Enric
Enric Balletbò i Serra - Feb. 7, 2013, 10:43 a.m.
Hi,

2013/2/5 Enric Balletbo Serra <eballetbo@gmail.com>:
> Hi Kyungmin,
>
> Thanks for revisit the patch.
>
> 2013/2/5 Kyungmin Park <kmpark@infradead.org>:
>> Hi,
>>
>> On Tue, Feb 5, 2013 at 6:23 PM, Enric Balletbo i Serra
>> <eballetbo@gmail.com> wrote:
>>> From: Enric Balletbo i Serra <eballetbo@iseebcn.com>
>>>
>>> This patch will allow use SPL to boot an u-boot from the OneNAND.
>>>
>>> Tested with IGEPv2 board with a OneNAND from Numonyx.
>>>
>>> Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
>>> ---
>>>  arch/arm/cpu/armv7/omap3/board.c |    2 +-
>> It's not related with OneNAND SPL patch, can you split it two patches?
>
> Ok, I'll do in v2.
>
>>>  common/spl/Makefile              |    1 +
>>>  common/spl/spl.c                 |    5 +++++
>>>  common/spl/spl_onenand.c         |   45 ++++++++++++++++++++++++++++++++++++++
>>>  4 files changed, 52 insertions(+), 1 deletion(-)
>>>  create mode 100644 common/spl/spl_onenand.c
>>>
>>> diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
>>> index 89c587e..63063c8 100644
>>> --- a/arch/arm/cpu/armv7/omap3/board.c
>>> +++ b/arch/arm/cpu/armv7/omap3/board.c
>>> @@ -110,7 +110,7 @@ int board_mmc_init(bd_t *bis)
>>>
>>>  void spl_board_init(void)
>>>  {
>>> -#ifdef CONFIG_SPL_NAND_SUPPORT
>>> +#if defined(CONFIG_SPL_NAND_SUPPORT) || defined(CONFIG_SPL_ONENAND_SUPPORT)
>>>         gpmc_init();
>>>  #endif
>>>  #ifdef CONFIG_SPL_I2C_SUPPORT
>>> diff --git a/common/spl/Makefile b/common/spl/Makefile
>>> index 5698a23..da2afc1 100644
>>> --- a/common/spl/Makefile
>>> +++ b/common/spl/Makefile
>>> @@ -18,6 +18,7 @@ COBJS-$(CONFIG_SPL_FRAMEWORK) += spl.o
>>>  COBJS-$(CONFIG_SPL_NOR_SUPPORT) += spl_nor.o
>>>  COBJS-$(CONFIG_SPL_YMODEM_SUPPORT) += spl_ymodem.o
>>>  COBJS-$(CONFIG_SPL_NAND_SUPPORT) += spl_nand.o
>>> +COBJS-$(CONFIG_SPL_ONENAND_SUPPORT) += spl_onenand.o
>>>  COBJS-$(CONFIG_SPL_NET_SUPPORT) += spl_net.o
>>>  endif
>>>
>>> diff --git a/common/spl/spl.c b/common/spl/spl.c
>>> index ff9ba7b..c584247 100644
>>> --- a/common/spl/spl.c
>>> +++ b/common/spl/spl.c
>>> @@ -197,6 +197,11 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
>>>                 spl_nand_load_image();
>>>                 break;
>>>  #endif
>>> +#ifdef CONFIG_SPL_ONENAND_SUPPORT
>>> +       case BOOT_DEVICE_ONE_NAND:
>> ONE_NAND? It should be ONENAND.
>
> Well, I used ONE_NAND because this define was already defined in
>
> arch/arm/include/asm/arch-omap3/spl.h:29:#define BOOT_DEVICE_ONE_NAND   3
> arch/arm/include/asm/arch-omap5/spl.h:30:#define BOOT_DEVICE_ONE_NAND    4
> arch/arm/include/asm/arch-omap4/spl.h:30:#define BOOT_DEVICE_ONE_NAND   4
> arch/arm/include/asm/arch-mx35/spl.h:30:#define BOOT_DEVICE_ONE_NAND    4
>
> For me, also looks better use ONENAND, but then, I need to change all
> these defines. What do you prefer ? Maintain the use of ONE_NAND or
> change these defines ?
>

Before sending version 2. Any comment on this ? I can use
BOOT_DEVICE_ONE_NAND or I should change for BOOT_DEVICE_ONENAND ?

>>> +               spl_onenand_load_image();
>>> +               break;
>>> +#endif
>>>  #ifdef CONFIG_SPL_NOR_SUPPORT
>>>         case BOOT_DEVICE_NOR:
>>>                 spl_nor_load_image();
>>> diff --git a/common/spl/spl_onenand.c b/common/spl/spl_onenand.c
>>> new file mode 100644
>>> index 0000000..247f97b
>>> --- /dev/null
>>> +++ b/common/spl/spl_onenand.c
>>> @@ -0,0 +1,45 @@
>>> +/*
>>> + * Copyright (C) 2011
>>> + * Corscience GmbH & Co. KG - Simon Schwarz <schwarz@corscience.de>
>>> + *
>>> + * See file CREDITS for list of people who contributed to this
>>> + * project.
>>> + *
>>> + * This program is free software; you can redistribute it and/or
>>> + * modify it under the terms of the GNU General Public License as
>>> + * published by the Free Software Foundation; either version 2 of
>>> + * the License, or (at your option) any later version.
>>> + *
>>> + * This program is distributed in the hope that it will be useful,
>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>>> + * GNU General Public License for more details.
>>> + *
>>> + * You should have received a copy of the GNU General Public License
>>> + * along with this program; if not, write to the Free Software
>>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>>> + * MA 02111-1307 USA
>>> + */
>>> +#include <common.h>
>>> +#include <config.h>
>>> +#include <spl.h>
>>> +#include <asm/io.h>
>>> +#include <onenand_uboot.h>
>>> +
>>> +void spl_onenand_load_image(void)
>>> +{
>>> +       struct image_header *header;
>>> +       int *src __attribute__((unused));
>>> +       int *dst __attribute__((unused));
>> why these are needed? just remove these.
>>
>
> Right, I'll remove.
>
>> Thank you,
>> Kyungmin Park
>>> +
>>> +       debug("spl: onenand\n");
>>> +
>>> +       /*use CONFIG_SYS_TEXT_BASE as temporary storage area */
>>> +       header = (struct image_header *)(CONFIG_SYS_TEXT_BASE);
>>> +       /* Load u-boot */
>>> +       onenand_spl_load_image(CONFIG_SYS_ONENAND_U_BOOT_OFFS,
>>> +               CONFIG_SYS_ONENAND_PAGE_SIZE, (void *)header);
>>> +       spl_parse_image_header(header);
>>> +       onenand_spl_load_image(CONFIG_SYS_ONENAND_U_BOOT_OFFS,
>>> +               spl_image.size, (void *)spl_image.load_addr);
>>> +}
>>> --
>>> 1.7.10.4
>>>
>>> _______________________________________________
>>> U-Boot mailing list
>>> U-Boot@lists.denx.de
>>> http://lists.denx.de/mailman/listinfo/u-boot
>
> Thanks,
>   Enric
Tom Rini - Feb. 7, 2013, 1:19 p.m.
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On 02/07/2013 05:43 AM, Enric Balletbo Serra wrote:

[snip]
>> arch/arm/include/asm/arch-omap3/spl.h:29:#define 
>> BOOT_DEVICE_ONE_NAND   3 
>> arch/arm/include/asm/arch-omap5/spl.h:30:#define 
>> BOOT_DEVICE_ONE_NAND    4 
>> arch/arm/include/asm/arch-omap4/spl.h:30:#define 
>> BOOT_DEVICE_ONE_NAND   4 
>> arch/arm/include/asm/arch-mx35/spl.h:30:#define 
>> BOOT_DEVICE_ONE_NAND    4
>> 
>> For me, also looks better use ONENAND, but then, I need to
>> change all these defines. What do you prefer ? Maintain the use
>> of ONE_NAND or change these defines ?
>> 
> 
> Before sending version 2. Any comment on this ? I can use 
> BOOT_DEVICE_ONE_NAND or I should change for BOOT_DEVICE_ONENAND ?

The technology is ONENAND right?  Lets just fix the other defines.

- -- 
Tom
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/
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=s8l3
-----END PGP SIGNATURE-----

Patch

diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
index 89c587e..63063c8 100644
--- a/arch/arm/cpu/armv7/omap3/board.c
+++ b/arch/arm/cpu/armv7/omap3/board.c
@@ -110,7 +110,7 @@  int board_mmc_init(bd_t *bis)
 
 void spl_board_init(void)
 {
-#ifdef CONFIG_SPL_NAND_SUPPORT
+#if defined(CONFIG_SPL_NAND_SUPPORT) || defined(CONFIG_SPL_ONENAND_SUPPORT)
 	gpmc_init();
 #endif
 #ifdef CONFIG_SPL_I2C_SUPPORT
diff --git a/common/spl/Makefile b/common/spl/Makefile
index 5698a23..da2afc1 100644
--- a/common/spl/Makefile
+++ b/common/spl/Makefile
@@ -18,6 +18,7 @@  COBJS-$(CONFIG_SPL_FRAMEWORK) += spl.o
 COBJS-$(CONFIG_SPL_NOR_SUPPORT) += spl_nor.o
 COBJS-$(CONFIG_SPL_YMODEM_SUPPORT) += spl_ymodem.o
 COBJS-$(CONFIG_SPL_NAND_SUPPORT) += spl_nand.o
+COBJS-$(CONFIG_SPL_ONENAND_SUPPORT) += spl_onenand.o
 COBJS-$(CONFIG_SPL_NET_SUPPORT) += spl_net.o
 endif
 
diff --git a/common/spl/spl.c b/common/spl/spl.c
index ff9ba7b..c584247 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -197,6 +197,11 @@  void board_init_r(gd_t *dummy1, ulong dummy2)
 		spl_nand_load_image();
 		break;
 #endif
+#ifdef CONFIG_SPL_ONENAND_SUPPORT
+	case BOOT_DEVICE_ONE_NAND:
+		spl_onenand_load_image();
+		break;
+#endif
 #ifdef CONFIG_SPL_NOR_SUPPORT
 	case BOOT_DEVICE_NOR:
 		spl_nor_load_image();
diff --git a/common/spl/spl_onenand.c b/common/spl/spl_onenand.c
new file mode 100644
index 0000000..247f97b
--- /dev/null
+++ b/common/spl/spl_onenand.c
@@ -0,0 +1,45 @@ 
+/*
+ * Copyright (C) 2011
+ * Corscience GmbH & Co. KG - Simon Schwarz <schwarz@corscience.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <config.h>
+#include <spl.h>
+#include <asm/io.h>
+#include <onenand_uboot.h>
+
+void spl_onenand_load_image(void)
+{
+	struct image_header *header;
+	int *src __attribute__((unused));
+	int *dst __attribute__((unused));
+
+	debug("spl: onenand\n");
+
+	/*use CONFIG_SYS_TEXT_BASE as temporary storage area */
+	header = (struct image_header *)(CONFIG_SYS_TEXT_BASE);
+	/* Load u-boot */
+	onenand_spl_load_image(CONFIG_SYS_ONENAND_U_BOOT_OFFS,
+		CONFIG_SYS_ONENAND_PAGE_SIZE, (void *)header);
+	spl_parse_image_header(header);
+	onenand_spl_load_image(CONFIG_SYS_ONENAND_U_BOOT_OFFS,
+		spl_image.size, (void *)spl_image.load_addr);
+}