| Message ID | 1359821166-32352-2-git-send-email-juhosg@openwrt.org |
|---|---|
| State | Superseded |
| Delegated to: | Daniel Schwierzeck |
| Headers | show |
2013/2/2 Gabor Juhos <juhosg@openwrt.org>: > Add minimal support for the MIPS Malta CoreLV board > emulated by Qemu. The only supported peripherial is > the UART. > > This is enough to boot U-Boot to the command prompt > both in little and big endian mode. > > Signed-off-by: Gabor Juhos <juhosg@openwrt.org> > Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com> > --- > Changes since v1: > - remove custom u-boot.lds file > - rebased against mips/testing > > Changes since RFC: --- > > --- > Screenshot: > > U-Boot 2013.01-00075-g80fa5c7 (Feb 02 2013 - 16:59:19) > > Board: MIPS Malta CoreLV (Qemu) > DRAM: 256 MiB > Using default environment > > In: serial > Out: serial > Err: serial > qemu-malta # version > > U-Boot 2013.01-00075-g80fa5c7 (Feb 02 2013 - 16:59:19) > mips-openwrt-linux-uclibc-gcc (Linaro GCC 4.6-2012.12) 4.6.4 20121210 > (prerelease) > GNU ld (GNU Binutils) 2.22 > qemu-malta # help > ? - alias for 'help' > base - print or set address offset > bdinfo - print Board Info structure > boot - boot default, i.e., run 'bootcmd' > bootd - boot default, i.e., run 'bootcmd' > bootm - boot application image from memory > cmp - memory compare > coninfo - print console devices and information > cp - memory copy > crc32 - checksum calculation > echo - echo args to console > editenv - edit environment variable > env - environment handling commands > go - start application at address 'addr' > help - print command description/usage > iminfo - print header information for application image > imxtract- extract a part of a multi-image > itest - return true/false on integer compare > loop - infinite loop on address range > md - memory display > mm - memory modify (auto-incrementing address) > mtest - simple RAM read/write test > mw - memory write (fill) > nm - memory modify (constant address) > printenv- print environment variables > reset - Perform RESET of the CPU > run - run commands in an environment variable > setenv - set environment variables > sleep - delay execution for some time > source - run script from memory > version - print monitor, compiler and linker version > qemu-malta # > --- > arch/mips/include/asm/malta.h | 16 ++++++ > board/qemu-malta/Makefile | 45 +++++++++++++++++ > board/qemu-malta/lowlevel_init.S | 19 +++++++ > board/qemu-malta/qemu-malta.c | 20 ++++++++ > boards.cfg | 2 + > include/configs/qemu-malta.h | 104 ++++++++++++++++++++++++++++++++++++++ > 6 files changed, 206 insertions(+) > create mode 100644 arch/mips/include/asm/malta.h > create mode 100644 board/qemu-malta/Makefile > create mode 100644 board/qemu-malta/lowlevel_init.S > create mode 100644 board/qemu-malta/qemu-malta.c > create mode 100644 include/configs/qemu-malta.h > > diff --git a/arch/mips/include/asm/malta.h b/arch/mips/include/asm/malta.h > new file mode 100644 > index 0000000..b215164 > --- /dev/null > +++ b/arch/mips/include/asm/malta.h > @@ -0,0 +1,16 @@ > +/* > + * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org> > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms of the GNU General Public License version 2 as published > + * by the Free Software Foundation. > + */ > + > +#ifndef _MIPS_ASM_MALTA_H > +#define _MIPS_ASM_MALTA_H > + > +#define MALTA_IO_PORT_BASE 0x10000000 > + > +#define MALTA_UART_BASE (MALTA_IO_PORT_BASE + 0x3f8) > + > +#endif /* _MIPS_ASM_MALTA_H */ > diff --git a/board/qemu-malta/Makefile b/board/qemu-malta/Makefile > new file mode 100644 > index 0000000..6251bb8 > --- /dev/null > +++ b/board/qemu-malta/Makefile > @@ -0,0 +1,45 @@ > +# > +# (C) Copyright 2003-2006 > +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. > +# > +# See file CREDITS for list of people who contributed to this > +# project. > +# > +# This program is free software; you can redistribute it and/or > +# modify it under the terms of the GNU General Public License as > +# published by the Free Software Foundation; either version 2 of > +# the License, or (at your option) any later version. > +# > +# This program is distributed in the hope that it will be useful, > +# but WITHOUT ANY WARRANTY; without even the implied warranty of > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > +# GNU General Public License for more details. > +# > +# You should have received a copy of the GNU General Public License > +# along with this program; if not, write to the Free Software > +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, > +# MA 02111-1307 USA > +# > + > +include $(TOPDIR)/config.mk > + > +LIB = $(obj)lib$(BOARD).o > + > +COBJS = $(BOARD).o > +SOBJS = lowlevel_init.o > + > +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) > +OBJS := $(addprefix $(obj),$(COBJS)) > +SOBJS := $(addprefix $(obj),$(SOBJS)) > + > +$(LIB): $(OBJS) $(SOBJS) > + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) > + > +######################################################################### > + > +# defines $(obj).depend target > +include $(SRCTREE)/rules.mk > + > +sinclude $(obj).depend > + > +######################################################################### > diff --git a/board/qemu-malta/lowlevel_init.S b/board/qemu-malta/lowlevel_init.S > new file mode 100644 > index 0000000..c5c5bd9 > --- /dev/null > +++ b/board/qemu-malta/lowlevel_init.S > @@ -0,0 +1,19 @@ > +/* > + * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org> > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms of the GNU General Public License version 2 as published > + * by the Free Software Foundation. > + */ > + > +#include <asm/regdef.h> > + > + .text > + .set noreorder > + .set mips32 > + > + .globl lowlevel_init > +lowlevel_init: > + > + jr ra > + nop can't we use CONFIG_SKIP_LOWLEVEL_INIT and drop this file? We neither need to initialize a memory controller nor caches on Qemu. > diff --git a/board/qemu-malta/qemu-malta.c b/board/qemu-malta/qemu-malta.c > new file mode 100644 > index 0000000..9ba711d > --- /dev/null > +++ b/board/qemu-malta/qemu-malta.c > @@ -0,0 +1,20 @@ > +/* > + * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org> > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms of the GNU General Public License version 2 as published > + * by the Free Software Foundation. > + */ > + > +#include <common.h> > + > +phys_size_t initdram(int board_type) > +{ > + return CONFIG_SYS_MEM_SIZE; > +} > + > +int checkboard(void) > +{ > + puts("Board: MIPS Malta CoreLV (Qemu)\n"); > + return 0; > +} > diff --git a/boards.cfg b/boards.cfg > index 98f7a14..7f919e5 100644 > --- a/boards.cfg > +++ b/boards.cfg > @@ -426,6 +426,8 @@ qemu_mips mips mips32 qemu-mips - > qemu_mipsel mips mips32 qemu-mips - - qemu-mips:SYS_LITTLE_ENDIAN > qemu_mips64 mips mips64 qemu-mips - - qemu-mips64:SYS_BIG_ENDIAN > qemu_mips64el mips mips64 qemu-mips - - qemu-mips64:SYS_LITTLE_ENDIAN > +qemu_malta mips mips32 qemu-malta - - qemu-malta:MIPS32,SYS_BIG_ENDIAN > +qemu_maltael mips mips32 qemu-malta - - qemu-malta:MIPS32,SYS_LITTLE_ENDIAN > vct_platinum mips mips32 vct micronas - vct:VCT_PLATINUM > vct_platinumavc mips mips32 vct micronas - vct:VCT_PLATINUMAVC > vct_platinumavc_onenand mips mips32 vct micronas - vct:VCT_PLATINUMAVC,VCT_ONENAND > diff --git a/include/configs/qemu-malta.h b/include/configs/qemu-malta.h > new file mode 100644 > index 0000000..c72c5dd > --- /dev/null > +++ b/include/configs/qemu-malta.h > @@ -0,0 +1,104 @@ > +/* > + * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org> > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms of the GNU General Public License version 2 as published > + * by the Free Software Foundation. > + */ > + > +#ifndef _QEMU_MALTA_CONFIG_H > +#define _QEMU_MALTA_CONFIG_H > + > +#include <asm/addrspace.h> > +#include <asm/malta.h> > + > +/* > + * System configuration > + */ > +#define CONFIG_QEMU_MALTA we should extend qemu-mips.h and define CONFIG_QEMU_MALTA respectively CONFIG_QEMU_MALTA in boards.cfg to avoid redundant code. All differences could be handled with these options. > + > +/* > + * CPU Configuration > + */ > +#define CONFIG_SYS_MHZ 250 /* arbitrary value */ > +#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000) > +#define CONFIG_SYS_HZ 1000 > + > +#define CONFIG_SYS_DCACHE_SIZE 16384 /* arbitrary value */ > +#define CONFIG_SYS_ICACHE_SIZE 16384 /* arbitrary value */ > +#define CONFIG_SYS_CACHELINE_SIZE 32 /* arbitrary value */ > + > +#define CONFIG_SWAP_IO_SPACE > + > +/* > + * Memory map > + */ > +#define CONFIG_SYS_TEXT_BASE 0xbfc00000 /* Rom version */ > +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE > + > +#define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */ > +#define CONFIG_SYS_MEM_SIZE (256 * 1024 * 1024) > + > +#define CONFIG_SYS_INIT_SP_OFFSET 0x400000 > + > +#define CONFIG_SYS_LOAD_ADDR 0x81000000 > +#define CONFIG_SYS_MEMTEST_START 0x80100000 > +#define CONFIG_SYS_MEMTEST_END 0x80800000 > + > +#define CONFIG_SYS_MALLOC_LEN (128 * 1024) > +#define CONFIG_SYS_BOOTPARAMS_LEN (128 * 1024) > + > +/* > + * Console configuration > + */ > +#if defined(CONFIG_SYS_LITTLE_ENDIAN) > +#define CONFIG_SYS_PROMPT "qemu-maltael # " > +#else > +#define CONFIG_SYS_PROMPT "qemu-malta # " > +#endif > + > +#define CONFIG_SYS_CBSIZE 256 > +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ > + sizeof(CONFIG_SYS_PROMPT) + 16) > +#define CONFIG_SYS_MAXARGS 16 > + > +#define CONFIG_AUTO_COMPLETE > +#define CONFIG_CMDLINE_EDITING > + > +/* > + * Serial driver > + */ > +#define CONFIG_BAUDRATE 115200 > + > +#define CONFIG_SYS_NS16550 > +#define CONFIG_SYS_NS16550_SERIAL > +#define CONFIG_SYS_NS16550_REG_SIZE 1 > +#define CONFIG_SYS_NS16550_CLK 115200 > +#define CONFIG_SYS_NS16550_COM1 CKSEG1ADDR(MALTA_UART_BASE) > +#define CONFIG_CONS_INDEX 1 > + > +/* > + * Environment > + */ > +#define CONFIG_ENV_IS_NOWHERE > +#define CONFIG_ENV_SIZE 0x10000 > + > +/* > + * Flash configuration > + */ > +#define CONFIG_SYS_NO_FLASH > + > +/* > + * Commands > + */ > +#include <config_cmd_default.h> > + > +#undef CONFIG_CMD_FPGA > +#undef CONFIG_CMD_LOADB > +#undef CONFIG_CMD_LOADS > +#undef CONFIG_CMD_NET > +#undef CONFIG_CMD_NFS > + > +#define CONFIG_SYS_LONGHELP /* verbose help, undef to save memory */ > + > +#endif /* _QEMU_MALTA_CONFIG_H */ > -- > 1.7.10 >
Hi Daniel, ... >> diff --git a/board/qemu-malta/lowlevel_init.S b/board/qemu-malta/lowlevel_init.S >> new file mode 100644 >> index 0000000..c5c5bd9 >> --- /dev/null >> +++ b/board/qemu-malta/lowlevel_init.S >> @@ -0,0 +1,19 @@ >> +/* >> + * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org> >> + * >> + * This program is free software; you can redistribute it and/or modify it >> + * under the terms of the GNU General Public License version 2 as published >> + * by the Free Software Foundation. >> + */ >> + >> +#include <asm/regdef.h> >> + >> + .text >> + .set noreorder >> + .set mips32 >> + >> + .globl lowlevel_init >> +lowlevel_init: >> + >> + jr ra >> + nop > > can't we use CONFIG_SKIP_LOWLEVEL_INIT and drop this file? > We neither need to initialize a memory controller nor caches on Qemu. We can use that option and drop the file from this patch. However in that case I will have to reintroduce it and remove the config option in a subsequent patch. The lowlevel_init will be used to initialize the Galileo system controller. ... >> diff --git a/include/configs/qemu-malta.h b/include/configs/qemu-malta.h >> new file mode 100644 >> index 0000000..c72c5dd >> --- /dev/null >> +++ b/include/configs/qemu-malta.h >> @@ -0,0 +1,104 @@ >> +/* >> + * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org> >> + * >> + * This program is free software; you can redistribute it and/or modify it >> + * under the terms of the GNU General Public License version 2 as published >> + * by the Free Software Foundation. >> + */ >> + >> +#ifndef _QEMU_MALTA_CONFIG_H >> +#define _QEMU_MALTA_CONFIG_H >> + >> +#include <asm/addrspace.h> >> +#include <asm/malta.h> >> + >> +/* >> + * System configuration >> + */ >> +#define CONFIG_QEMU_MALTA > > we should extend qemu-mips.h and define CONFIG_QEMU_MALTA > respectively CONFIG_QEMU_MALTA in boards.cfg to avoid redundant code. > All differences could be handled with these options. Sure, we can do it if you prefer that. In my opinion it is much cleaner to introduce a new config file, instead of adding random ifdef statements into another file. -Gabor
diff --git a/arch/mips/include/asm/malta.h b/arch/mips/include/asm/malta.h new file mode 100644 index 0000000..b215164 --- /dev/null +++ b/arch/mips/include/asm/malta.h @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _MIPS_ASM_MALTA_H +#define _MIPS_ASM_MALTA_H + +#define MALTA_IO_PORT_BASE 0x10000000 + +#define MALTA_UART_BASE (MALTA_IO_PORT_BASE + 0x3f8) + +#endif /* _MIPS_ASM_MALTA_H */ diff --git a/board/qemu-malta/Makefile b/board/qemu-malta/Makefile new file mode 100644 index 0000000..6251bb8 --- /dev/null +++ b/board/qemu-malta/Makefile @@ -0,0 +1,45 @@ +# +# (C) Copyright 2003-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS = $(BOARD).o +SOBJS = lowlevel_init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/qemu-malta/lowlevel_init.S b/board/qemu-malta/lowlevel_init.S new file mode 100644 index 0000000..c5c5bd9 --- /dev/null +++ b/board/qemu-malta/lowlevel_init.S @@ -0,0 +1,19 @@ +/* + * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <asm/regdef.h> + + .text + .set noreorder + .set mips32 + + .globl lowlevel_init +lowlevel_init: + + jr ra + nop diff --git a/board/qemu-malta/qemu-malta.c b/board/qemu-malta/qemu-malta.c new file mode 100644 index 0000000..9ba711d --- /dev/null +++ b/board/qemu-malta/qemu-malta.c @@ -0,0 +1,20 @@ +/* + * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <common.h> + +phys_size_t initdram(int board_type) +{ + return CONFIG_SYS_MEM_SIZE; +} + +int checkboard(void) +{ + puts("Board: MIPS Malta CoreLV (Qemu)\n"); + return 0; +} diff --git a/boards.cfg b/boards.cfg index 98f7a14..7f919e5 100644 --- a/boards.cfg +++ b/boards.cfg @@ -426,6 +426,8 @@ qemu_mips mips mips32 qemu-mips - qemu_mipsel mips mips32 qemu-mips - - qemu-mips:SYS_LITTLE_ENDIAN qemu_mips64 mips mips64 qemu-mips - - qemu-mips64:SYS_BIG_ENDIAN qemu_mips64el mips mips64 qemu-mips - - qemu-mips64:SYS_LITTLE_ENDIAN +qemu_malta mips mips32 qemu-malta - - qemu-malta:MIPS32,SYS_BIG_ENDIAN +qemu_maltael mips mips32 qemu-malta - - qemu-malta:MIPS32,SYS_LITTLE_ENDIAN vct_platinum mips mips32 vct micronas - vct:VCT_PLATINUM vct_platinumavc mips mips32 vct micronas - vct:VCT_PLATINUMAVC vct_platinumavc_onenand mips mips32 vct micronas - vct:VCT_PLATINUMAVC,VCT_ONENAND diff --git a/include/configs/qemu-malta.h b/include/configs/qemu-malta.h new file mode 100644 index 0000000..c72c5dd --- /dev/null +++ b/include/configs/qemu-malta.h @@ -0,0 +1,104 @@ +/* + * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _QEMU_MALTA_CONFIG_H +#define _QEMU_MALTA_CONFIG_H + +#include <asm/addrspace.h> +#include <asm/malta.h> + +/* + * System configuration + */ +#define CONFIG_QEMU_MALTA + +/* + * CPU Configuration + */ +#define CONFIG_SYS_MHZ 250 /* arbitrary value */ +#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000) +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_SYS_DCACHE_SIZE 16384 /* arbitrary value */ +#define CONFIG_SYS_ICACHE_SIZE 16384 /* arbitrary value */ +#define CONFIG_SYS_CACHELINE_SIZE 32 /* arbitrary value */ + +#define CONFIG_SWAP_IO_SPACE + +/* + * Memory map + */ +#define CONFIG_SYS_TEXT_BASE 0xbfc00000 /* Rom version */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE + +#define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */ +#define CONFIG_SYS_MEM_SIZE (256 * 1024 * 1024) + +#define CONFIG_SYS_INIT_SP_OFFSET 0x400000 + +#define CONFIG_SYS_LOAD_ADDR 0x81000000 +#define CONFIG_SYS_MEMTEST_START 0x80100000 +#define CONFIG_SYS_MEMTEST_END 0x80800000 + +#define CONFIG_SYS_MALLOC_LEN (128 * 1024) +#define CONFIG_SYS_BOOTPARAMS_LEN (128 * 1024) + +/* + * Console configuration + */ +#if defined(CONFIG_SYS_LITTLE_ENDIAN) +#define CONFIG_SYS_PROMPT "qemu-maltael # " +#else +#define CONFIG_SYS_PROMPT "qemu-malta # " +#endif + +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 + +#define CONFIG_AUTO_COMPLETE +#define CONFIG_CMDLINE_EDITING + +/* + * Serial driver + */ +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK 115200 +#define CONFIG_SYS_NS16550_COM1 CKSEG1ADDR(MALTA_UART_BASE) +#define CONFIG_CONS_INDEX 1 + +/* + * Environment + */ +#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_SIZE 0x10000 + +/* + * Flash configuration + */ +#define CONFIG_SYS_NO_FLASH + +/* + * Commands + */ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_LOADB +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS + +#define CONFIG_SYS_LONGHELP /* verbose help, undef to save memory */ + +#endif /* _QEMU_MALTA_CONFIG_H */
Add minimal support for the MIPS Malta CoreLV board emulated by Qemu. The only supported peripherial is the UART. This is enough to boot U-Boot to the command prompt both in little and big endian mode. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com> --- Changes since v1: - remove custom u-boot.lds file - rebased against mips/testing Changes since RFC: --- --- Screenshot: U-Boot 2013.01-00075-g80fa5c7 (Feb 02 2013 - 16:59:19) Board: MIPS Malta CoreLV (Qemu) DRAM: 256 MiB Using default environment In: serial Out: serial Err: serial qemu-malta # version U-Boot 2013.01-00075-g80fa5c7 (Feb 02 2013 - 16:59:19) mips-openwrt-linux-uclibc-gcc (Linaro GCC 4.6-2012.12) 4.6.4 20121210 (prerelease) GNU ld (GNU Binutils) 2.22 qemu-malta # help ? - alias for 'help' base - print or set address offset bdinfo - print Board Info structure boot - boot default, i.e., run 'bootcmd' bootd - boot default, i.e., run 'bootcmd' bootm - boot application image from memory cmp - memory compare coninfo - print console devices and information cp - memory copy crc32 - checksum calculation echo - echo args to console editenv - edit environment variable env - environment handling commands go - start application at address 'addr' help - print command description/usage iminfo - print header information for application image imxtract- extract a part of a multi-image itest - return true/false on integer compare loop - infinite loop on address range md - memory display mm - memory modify (auto-incrementing address) mtest - simple RAM read/write test mw - memory write (fill) nm - memory modify (constant address) printenv- print environment variables reset - Perform RESET of the CPU run - run commands in an environment variable setenv - set environment variables sleep - delay execution for some time source - run script from memory version - print monitor, compiler and linker version qemu-malta # --- arch/mips/include/asm/malta.h | 16 ++++++ board/qemu-malta/Makefile | 45 +++++++++++++++++ board/qemu-malta/lowlevel_init.S | 19 +++++++ board/qemu-malta/qemu-malta.c | 20 ++++++++ boards.cfg | 2 + include/configs/qemu-malta.h | 104 ++++++++++++++++++++++++++++++++++++++ 6 files changed, 206 insertions(+) create mode 100644 arch/mips/include/asm/malta.h create mode 100644 board/qemu-malta/Makefile create mode 100644 board/qemu-malta/lowlevel_init.S create mode 100644 board/qemu-malta/qemu-malta.c create mode 100644 include/configs/qemu-malta.h