Patchwork [v2,07/20] arm: add Faraday FTI2C010 I2C controller support

login
register
mail settings
Submitter Kuo-Jung Su
Date Jan. 25, 2013, 8:19 a.m.
Message ID <1359101996-11667-8-git-send-email-dantesu@gmail.com>
Download mbox | patch
Permalink /patch/215575/
State New
Headers show

Comments

Kuo-Jung Su - Jan. 25, 2013, 8:19 a.m.
From: Kuo-Jung Su <dantesu@faraday-tech.com>

The FTI2C010 allows the host processor to serve as a master or slave
in the I2C bus. Data are transmitted to and received from the I2C bus
via a buffered interface.

Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com>
---
 hw/fti2c010.c |  205 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 hw/fti2c010.h |   62 +++++++++++++++++
 2 files changed, 267 insertions(+)
 create mode 100644 hw/fti2c010.c
 create mode 100644 hw/fti2c010.h

Patch

diff --git a/hw/fti2c010.c b/hw/fti2c010.c
new file mode 100644
index 0000000..6f6b440
--- /dev/null
+++ b/hw/fti2c010.c
@@ -0,0 +1,205 @@ 
+/*
+ * QEMU model of the FTI2C010 Controller
+ *
+ * Copyright (C) 2012 Faraday Technology
+ * Written by Dante Su <dantesu@faraday-tech.com>
+ *
+ * This file is licensed under GNU GPL v2.
+ */
+
+#include "sysbus.h"
+#include "sysemu/sysemu.h"
+#include "i2c.h"
+#include "fti2c010.h"
+
+#define I2C_RD  1
+#define I2C_WR  0
+
+#define TYPE_FTI2C010   "fti2c010"
+
+typedef struct Fti2c010State {
+    SysBusDevice busdev;
+    MemoryRegion mmio;
+
+    qemu_irq irq;
+    i2c_bus *bus;
+
+    uint32_t cr;
+    uint32_t sr;
+    uint32_t cdr;
+    uint32_t dr;
+    uint32_t tgsr;
+
+    uint8_t  recv;    /* I2C RD = 1; I2C WR = 0 */
+    uint8_t  addr;    /* 7-bits device address */
+
+} fti2c010_state;
+
+#define FTI2C010(obj) \
+    OBJECT_CHECK(fti2c010_state, obj, TYPE_FTI2C010)
+
+static uint64_t fti2c010_mem_read(void *opaque, hwaddr addr, unsigned size)
+{
+    fti2c010_state *s = FTI2C010(opaque);
+    uint32_t rc = 0;
+
+    switch (addr) {
+    case REG_CR:
+        return s->cr;
+    case REG_SR:
+        rc = s->sr | (i2c_bus_busy(s->bus) ? SR_BB : 0);
+        s->sr &= 0xfffff00f;
+        qemu_set_irq(s->irq, 0);
+        break;
+    case REG_CDR:
+        return s->cdr;
+    case REG_DR:
+        return s->dr;
+    case REG_TGSR:
+        return s->tgsr;
+    case REG_BMR:
+        return 0x00000003;
+    case 0x30:    /* revision register */
+        return 0x00011000;
+    default:
+        break;
+    }
+
+    return rc;
+}
+
+static void fti2c010_mem_write(void    *opaque,
+                               hwaddr   addr,
+                               uint64_t val,
+                               unsigned size)
+{
+    fti2c010_state *s = FTI2C010(opaque);
+
+    switch (addr) {
+    case REG_CR:
+        s->cr = (uint32_t)val;
+        if (s->cr & CR_I2CRST) {
+            s->dr = 0;
+            s->sr = 0;
+        } else if ((s->cr & (CR_MASTER_EN | CR_TBEN))
+                        == (CR_MASTER_EN | CR_TBEN)) {
+            s->sr &= ~SR_ACK;
+            if (s->cr & CR_START) {
+                s->recv = (s->dr & I2C_RD) ? 1 : 0;
+                s->addr = (s->dr >> 1) & 0x7f;
+                if (i2c_start_transfer(s->bus, s->addr, s->recv) == 0) {
+                    s->sr |= SR_DT | SR_ACK;
+                } else {
+                    s->sr &= ~SR_DT;
+                }
+            } else {
+                if (s->recv) {
+                    s->dr = i2c_recv(s->bus);
+                    s->sr |= SR_DR;
+                } else {
+                    i2c_send(s->bus, (uint8_t)s->dr);
+                    s->sr |= SR_DT;
+                }
+                if (s->cr & CR_NACK) {
+                    i2c_nack(s->bus);
+                }
+                s->sr |= SR_ACK;
+                if (s->cr & CR_STOP) {
+                    i2c_end_transfer(s->bus);
+                }
+            }
+        }
+        s->cr &= 0xffffff7e;    /* clear TB_EN, I2C_RST */
+        if ((s->sr >> 4) & (s->cr >> 8)) {
+            qemu_set_irq(s->irq, 1);
+        }
+        break;
+    case REG_CDR:
+        s->cdr = (uint32_t)val;
+        break;
+    case REG_DR:
+        s->dr  = (uint32_t)val & 0xff;
+        break;
+    case REG_TGSR:
+        s->tgsr = (uint32_t)val;
+        break;
+    default:
+        break;
+    }
+}
+
+static const MemoryRegionOps fti2c010_ops = {
+    .read  = fti2c010_mem_read,
+    .write = fti2c010_mem_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .valid = {
+        .min_access_size = 4,
+        .max_access_size = 4
+    }
+};
+
+static void fti2c010_reset(DeviceState *ds)
+{
+    SysBusDevice *busdev = SYS_BUS_DEVICE(ds);
+    fti2c010_state *s = FTI2C010(FROM_SYSBUS(fti2c010_state, busdev));
+
+    s->cr   = 0;
+    s->sr   = 0;
+    s->cdr  = 0;
+    s->tgsr = 0x00000401;
+
+    qemu_set_irq(s->irq, 0);
+}
+
+static int fti2c010_init(SysBusDevice *dev)
+{
+    fti2c010_state *s = FTI2C010(FROM_SYSBUS(fti2c010_state, dev));
+
+    s->bus = i2c_init_bus(&dev->qdev, "i2c");
+
+    memory_region_init_io(&s->mmio, &fti2c010_ops, s, TYPE_FTI2C010, 0x1000);
+    sysbus_init_mmio(dev, &s->mmio);
+    sysbus_init_irq(dev, &s->irq);
+
+    return 0;
+}
+
+static const VMStateDescription vmstate_fti2c010 = {
+    .name = TYPE_FTI2C010,
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .minimum_version_id_old = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT32(cr, fti2c010_state),
+        VMSTATE_UINT32(sr, fti2c010_state),
+        VMSTATE_UINT32(cdr, fti2c010_state),
+        VMSTATE_UINT32(dr, fti2c010_state),
+        VMSTATE_UINT32(tgsr, fti2c010_state),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+static void fti2c010_class_init(ObjectClass *klass, void *data)
+{
+    SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    k->init     = fti2c010_init;
+    dc->vmsd    = &vmstate_fti2c010;
+    dc->reset   = fti2c010_reset;
+    dc->no_user = 1;
+}
+
+static const TypeInfo fti2c010_info = {
+    .name           = TYPE_FTI2C010,
+    .parent         = TYPE_SYS_BUS_DEVICE,
+    .instance_size  = sizeof(fti2c010_state),
+    .class_init     = fti2c010_class_init,
+};
+
+static void fti2c010_register_types(void)
+{
+    type_register_static(&fti2c010_info);
+}
+
+type_init(fti2c010_register_types)
diff --git a/hw/fti2c010.h b/hw/fti2c010.h
new file mode 100644
index 0000000..2c9a22c
--- /dev/null
+++ b/hw/fti2c010.h
@@ -0,0 +1,62 @@ 
+/*
+ * QEMU model of the FTI2C010 Controller
+ *
+ * Copyright (C) 2012 Faraday Technology
+ * Written by Dante Su <dantesu@faraday-tech.com>
+ *
+ * This file is licensed under GNU GPL.
+ */
+
+#ifndef FTI2C010_H
+#define FTI2C010_H
+
+/*
+ * FTI2C010 registers
+ */
+#define REG_CR              0x00
+#define REG_SR              0x04
+#define REG_CDR             0x08
+#define REG_DR              0x0C
+#define REG_SAR             0x10
+#define REG_TGSR            0x14
+#define REG_BMR             0x18
+
+/*
+ * REG_CR
+ */
+#define CR_STARTIEN         0x4000  /* start condition */
+#define CR_ALIEN            0x2000  /* Arbitration lose */
+#define CR_SAMIEN           0x1000  /* slave address match */
+#define CR_STOPIEN          0x800   /* stop condition */
+#define CR_BERRIEN          0x400   /* non ACK response */
+#define CR_DRIEN            0x200   /* data receive */
+#define CR_DTIEN            0x100   /* data transmit */
+#define CR_TBEN             0x80    /* transfer byte enable */
+#define CR_NACK             0x40
+#define CR_STOP             0x20    /* stop */
+#define CR_START            0x10    /* start */
+#define CR_GCEN             0x8     /* general call */
+#define CR_SCLEN            0x4     /* enable clock */
+#define CR_I2CEN            0x2     /* enable I2C */
+#define CR_I2CRST           0x1     /* reset I2C */
+#define CR_MASTER_INTR      (CR_ALIEN | CR_BERRIEN | CR_DRIEN | CR_DTIEN)
+#define CR_MASTER_EN        (CR_SCLEN | CR_I2CEN)
+#define CR_MASTER_MODE      (CR_MASTER_INTR | CR_MASTER_EN)
+
+/*
+ * REG_SR
+ */
+#define SR_START            0x800
+#define SR_AL               0x400
+#define SR_GC               0x200
+#define SR_SAM              0x100
+#define SR_STOP             0x80
+#define SR_BERR             0x40
+#define SR_DR               0x20    /* received one new data byte */
+#define SR_DT               0x10    /* trandmitted one data byte */
+#define SR_BB               0x8     /* set when i2c bus is busy */
+#define SR_I2CB             0x4     /* set when fti2c010 is busy */
+#define SR_ACK              0x2
+#define SR_RW               0x1
+
+#endif /* EOF */