ARM: Add SMSC911X support to Overo platform (V2)

Submitted by Steve Sakoman on Feb. 2, 2009, 6:27 a.m.

Details

Message ID 5e088bd90902012227o6e82ca64gbbe0bbc63ca03a69@mail.gmail.com
State Not Applicable
Delegated to: David Miller
Headers show

Commit Message

Steve Sakoman Feb. 2, 2009, 6:27 a.m.
Gumstix will soon be shipping a variant of their Summit board that
includes an SMSC LAN9221 ethernet interface.  This patch provides
support via the smsc911x driver when enabled in kernel config.

The Overo defconfig is not updated since the LAN9221 is an option
not present on all systems.

Signed-off-by: Steve Sakoman <steve@sakoman.com>
---
 arch/arm/mach-omap2/board-overo.c             |   62 +++++++++++++++++++++++++
 arch/arm/plat-omap/include/mach/board-overo.h |    3 +
 2 files changed, 65 insertions(+), 0 deletions(-)

Comments

Tony Lindgren Feb. 20, 2009, 8:43 p.m.
* Steve Sakoman <sakoman@gmail.com> [090201 22:28]:
> Gumstix will soon be shipping a variant of their Summit board that
> includes an SMSC LAN9221 ethernet interface.  This patch provides
> support via the smsc911x driver when enabled in kernel config.
> 
> The Overo defconfig is not updated since the LAN9221 is an option
> not present on all systems.

Adding this to omap3-upstream and pushing to linux-omap.

Tony

> Signed-off-by: Steve Sakoman <steve@sakoman.com>
> ---
>  arch/arm/mach-omap2/board-overo.c             |   62 +++++++++++++++++++++++++
>  arch/arm/plat-omap/include/mach/board-overo.h |    3 +
>  2 files changed, 65 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/board-overo.c
> b/arch/arm/mach-omap2/board-overo.c
> index 9995ac2..032a2c9 100644
> --- a/arch/arm/mach-omap2/board-overo.c
> +++ b/arch/arm/mach-omap2/board-overo.c
> @@ -55,6 +55,67 @@
>  #define GPMC_CS0_BASE  0x60
>  #define GPMC_CS_SIZE   0x30
> 
> +#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
> +
> +#include <linux/smsc911x.h>
> +
> +static struct resource overo_smsc911x_resources[] = {
> +	{
> +		.name	= "smsc911x-memory",
> +		.flags	= IORESOURCE_MEM,
> +	},
> +	{
> +		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
> +	},
> +};
> +
> +static struct smsc911x_platform_config overo_smsc911x_config = {
> +	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
> +	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
> +	.flags		= SMSC911X_USE_32BIT ,
> +	.phy_interface	= PHY_INTERFACE_MODE_MII,
> +};
> +
> +static struct platform_device overo_smsc911x_device = {
> +	.name		= "smsc911x",
> +	.id		= -1,
> +	.num_resources	= ARRAY_SIZE(overo_smsc911x_resources),
> +	.resource	= &overo_smsc911x_resources,
> +	.dev		= {
> +		.platform_data = &overo_smsc911x_config,
> +	},
> +};
> +
> +static inline void __init overo_init_smsc911x(void)
> +{
> +	unsigned long cs_mem_base;
> +
> +	if (gpmc_cs_request(OVERO_SMSC911X_CS, SZ_16M, &cs_mem_base) < 0) {
> +		printk(KERN_ERR "Failed request for GPMC mem for smsc911x\n");
> +		return;
> +	}
> +
> +	overo_smsc911x_resources[0].start = cs_mem_base + 0x0;
> +	overo_smsc911x_resources[0].end   = cs_mem_base + 0xff;
> +
> +	if ((gpio_request(OVERO_SMSC911X_GPIO, "SMSC911X IRQ") == 0) &&
> +	    (gpio_direction_input(OVERO_SMSC911X_GPIO) == 0)) {
> +		gpio_export(OVERO_SMSC911X_GPIO, 0);
> +	} else {
> +		printk(KERN_ERR "could not obtain gpio for SMSC911X IRQ\n");
> +		return;
> +	}
> +
> +	overo_smsc911x_resources[1].start = OMAP_GPIO_IRQ(OVERO_SMSC911X_GPIO);
> +	overo_smsc911x_resources[1].end	  = 0;
> +
> +	platform_device_register(&overo_smsc911x_device);
> +}
> +
> +#else
> +static inline void __init overo_init_smsc911x(void) { return; }
> +#endif
> +
>  static struct mtd_partition overo_nand_partitions[] = {
>  	{
>  		.name           = "xloader",
> @@ -234,6 +295,7 @@ static void __init overo_init(void)
>  	usb_musb_init();
>  	usb_ehci_init();
>  	overo_flash_init();
> +	overo_init_smsc911x();
> 
>  	if ((gpio_request(OVERO_GPIO_W2W_NRESET,
>  			  "OVERO_GPIO_W2W_NRESET") == 0) &&
> diff --git a/arch/arm/plat-omap/include/mach/board-overo.h
> b/arch/arm/plat-omap/include/mach/board-overo.h
> index 7ecae66..8635171 100644
> --- a/arch/arm/plat-omap/include/mach/board-overo.h
> +++ b/arch/arm/plat-omap/include/mach/board-overo.h
> @@ -22,5 +22,8 @@
>  #define OVERO_GPIO_USBH_CPEN	168
>  #define OVERO_GPIO_USBH_NRESET	183
> 
> +#define OVERO_SMSC911X_CS	5
> +#define OVERO_SMSC911X_GPIO	176
> +
>  #endif /* ____ASM_ARCH_OVERO_H */
> 
> -- 
> 1.5.6.3
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch hide | download patch | download mbox

diff --git a/arch/arm/mach-omap2/board-overo.c
b/arch/arm/mach-omap2/board-overo.c
index 9995ac2..032a2c9 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -55,6 +55,67 @@ 
 #define GPMC_CS0_BASE  0x60
 #define GPMC_CS_SIZE   0x30

+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+
+#include <linux/smsc911x.h>
+
+static struct resource overo_smsc911x_resources[] = {
+	{
+		.name	= "smsc911x-memory",
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct smsc911x_platform_config overo_smsc911x_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_32BIT ,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device overo_smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(overo_smsc911x_resources),
+	.resource	= &overo_smsc911x_resources,
+	.dev		= {
+		.platform_data = &overo_smsc911x_config,
+	},
+};
+
+static inline void __init overo_init_smsc911x(void)
+{
+	unsigned long cs_mem_base;
+
+	if (gpmc_cs_request(OVERO_SMSC911X_CS, SZ_16M, &cs_mem_base) < 0) {
+		printk(KERN_ERR "Failed request for GPMC mem for smsc911x\n");
+		return;
+	}
+
+	overo_smsc911x_resources[0].start = cs_mem_base + 0x0;
+	overo_smsc911x_resources[0].end   = cs_mem_base + 0xff;
+
+	if ((gpio_request(OVERO_SMSC911X_GPIO, "SMSC911X IRQ") == 0) &&
+	    (gpio_direction_input(OVERO_SMSC911X_GPIO) == 0)) {
+		gpio_export(OVERO_SMSC911X_GPIO, 0);
+	} else {
+		printk(KERN_ERR "could not obtain gpio for SMSC911X IRQ\n");
+		return;
+	}
+
+	overo_smsc911x_resources[1].start = OMAP_GPIO_IRQ(OVERO_SMSC911X_GPIO);
+	overo_smsc911x_resources[1].end	  = 0;
+
+	platform_device_register(&overo_smsc911x_device);
+}
+
+#else
+static inline void __init overo_init_smsc911x(void) { return; }
+#endif
+
 static struct mtd_partition overo_nand_partitions[] = {
 	{
 		.name           = "xloader",
@@ -234,6 +295,7 @@  static void __init overo_init(void)
 	usb_musb_init();
 	usb_ehci_init();
 	overo_flash_init();
+	overo_init_smsc911x();

 	if ((gpio_request(OVERO_GPIO_W2W_NRESET,
 			  "OVERO_GPIO_W2W_NRESET") == 0) &&
diff --git a/arch/arm/plat-omap/include/mach/board-overo.h
b/arch/arm/plat-omap/include/mach/board-overo.h
index 7ecae66..8635171 100644
--- a/arch/arm/plat-omap/include/mach/board-overo.h
+++ b/arch/arm/plat-omap/include/mach/board-overo.h
@@ -22,5 +22,8 @@ 
 #define OVERO_GPIO_USBH_CPEN	168
 #define OVERO_GPIO_USBH_NRESET	183

+#define OVERO_SMSC911X_CS	5
+#define OVERO_SMSC911X_GPIO	176
+
 #endif /* ____ASM_ARCH_OVERO_H */