diff mbox

[1/6,v4] : perf/Power7: Use macros to identify perf events

Message ID 20130123062353.GB13720@us.ibm.com (mailing list archive)
State Not Applicable
Headers show

Commit Message

Sukadev Bhattiprolu Jan. 23, 2013, 6:23 a.m. UTC 
[PATCH 1/6][v4]: perf/Power7: Use macros to identify perf events

Define and use macros to identify perf events codes This would make it
easier and more readable when these event codes need to be used in more
than one place.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
---
 arch/powerpc/perf/power7-pmu.c |   28 ++++++++++++++++++++--------
 1 files changed, 20 insertions(+), 8 deletions(-)
diff mbox

Patch

diff --git a/arch/powerpc/perf/power7-pmu.c b/arch/powerpc/perf/power7-pmu.c
index 441af08..44e70d2 100644
--- a/arch/powerpc/perf/power7-pmu.c
+++ b/arch/powerpc/perf/power7-pmu.c
@@ -51,6 +51,18 @@ 
 #define MMCR1_PMCSEL_MSK	0xff
 
 /*
+ * Power7 event codes.
+ */
+#define	PME_PM_CYC			0x1e
+#define	PME_PM_GCT_NOSLOT_CYC		0x100f8
+#define	PME_PM_CMPLU_STALL		0x4000a
+#define	PME_PM_INST_CMPL		0x2
+#define	PME_PM_LD_REF_L1		0xc880
+#define	PME_PM_LD_MISS_L1		0x400f0
+#define	PME_PM_BRU_FIN			0x10068
+#define	PME_PM_BRU_MPRED		0x400f6
+
+/*
  * Layout of constraint bits:
  * 6666555555555544444444443333333333222222222211111111110000000000
  * 3210987654321098765432109876543210987654321098765432109876543210
@@ -296,14 +308,14 @@  static void power7_disable_pmc(unsigned int pmc, unsigned long mmcr[])
 }
 
 static int power7_generic_events[] = {
-	[PERF_COUNT_HW_CPU_CYCLES] = 0x1e,
-	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = 0x100f8, /* GCT_NOSLOT_CYC */
-	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = 0x4000a,  /* CMPLU_STALL */
-	[PERF_COUNT_HW_INSTRUCTIONS] = 2,
-	[PERF_COUNT_HW_CACHE_REFERENCES] = 0xc880,	/* LD_REF_L1_LSU*/
-	[PERF_COUNT_HW_CACHE_MISSES] = 0x400f0,		/* LD_MISS_L1	*/
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x10068,	/* BRU_FIN	*/
-	[PERF_COUNT_HW_BRANCH_MISSES] = 0x400f6,	/* BR_MPRED	*/
+	[PERF_COUNT_HW_CPU_CYCLES] =			PME_PM_CYC,
+	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] =	PME_PM_GCT_NOSLOT_CYC,
+	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] =	PME_PM_CMPLU_STALL,
+	[PERF_COUNT_HW_INSTRUCTIONS] =			PME_PM_INST_CMPL,
+	[PERF_COUNT_HW_CACHE_REFERENCES] =		PME_PM_LD_REF_L1,
+	[PERF_COUNT_HW_CACHE_MISSES] =			PME_PM_LD_MISS_L1,
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] =		PME_PM_BRU_FIN,
+	[PERF_COUNT_HW_BRANCH_MISSES] =			PME_PM_BRU_MPRED,
 };
 
 #define C(x)	PERF_COUNT_HW_CACHE_##x