Patchwork [U-Boot,v2,09/16] km/scripts: replace hardcoded uImage

login
register
mail settings
Submitter Holger Brunck
Date Jan. 21, 2013, 1:55 p.m.
Message ID <1358776528-27254-9-git-send-email-holger.brunck@keymile.com>
Download mbox | patch
Permalink /patch/214166/
State Awaiting Upstream
Delegated to: Kim Phillips
Headers show

Comments

Holger Brunck - Jan. 21, 2013, 1:55 p.m.
From: Andreas Huber <andreas.huber@keymile.com>

Replace uImage with ${uimage}.
If uimage is not set, default it to uImage.

Signed-off-by: Andreas Huber <andreas.huber@keymile.com>
Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
---
Changes for v2:
    - none

 board/keymile/scripts/develop-common.txt |    5 +++--
 board/keymile/scripts/ramfs-common.txt   |    5 +++--
 2 files changed, 6 insertions(+), 4 deletions(-)

Patch

diff --git a/board/keymile/scripts/develop-common.txt b/board/keymile/scripts/develop-common.txt
index aa3d659..a6bb1b1 100644
--- a/board/keymile/scripts/develop-common.txt
+++ b/board/keymile/scripts/develop-common.txt
@@ -1,8 +1,9 @@ 
 altbootcmd=run ${subbootcmds}
 bootcmd=run ${subbootcmds}
-configure=km_setboardid && saveenv && reset
+configure=run set_uimage; km_setboardid && saveenv && reset
 subbootcmds=tftpfdt tftpkernel nfsargs add_default boot
 nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${toolchain}/${arch}
-tftpkernel=tftpboot ${load_addr_r} ${hostname}/uImage
+tftpkernel=tftpboot ${load_addr_r} ${hostname}/${uimage}
 toolchain=/opt/eldk
 rootfssize=0
+set_uimage=printenv uimage || setenv uimage uImage
diff --git a/board/keymile/scripts/ramfs-common.txt b/board/keymile/scripts/ramfs-common.txt
index c1b45ab..8a8d287 100644
--- a/board/keymile/scripts/ramfs-common.txt
+++ b/board/keymile/scripts/ramfs-common.txt
@@ -4,8 +4,9 @@  altbootcmd=run ${subbootcmds}
 bootcmd=run ${subbootcmds}
 subbootcmds=tftpfdt tftpkernel setrootfsaddr tftpramfs flashargs add_default addpanic addramfs boot
 nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath}
-configure=km_setboardid && saveenv && reset
+configure=run set_uimage; km_setboardid && saveenv && reset
 rootfsfile=${hostname}/rootfsImage
 setrootfsaddr=setexpr value ${pnvramaddr} - ${rootfssize} && setenv rootfsaddr 0x${value}
-tftpkernel=tftpboot ${load_addr_r} ${hostname}/uImage
+tftpkernel=tftpboot ${load_addr_r} ${hostname}/${uimage}
 tftpramfs=tftpboot ${rootfsaddr} ${hostname}/rootfsImage
+set_uimage=printenv uimage || setenv uimage uImage