@@ -383,6 +383,9 @@
#define E1000_KABGTXD_BGSQLBIAS 0x00050000
+/* Low Power IDLE Control */
+#define E1000_LPIC_LPIET_SHIFT 24 /* Low Power Idle Entry Time */
+
/* PBA constants */
#define E1000_PBA_8K 0x0008 /* 8KB */
#define E1000_PBA_16K 0x0010 /* 16KB */
@@ -799,6 +802,33 @@
/* BME1000 PHY Specific Control Register */
#define BME1000_PSCR_ENABLE_DOWNSHIFT 0x0800 /* 1 = enable downshift */
+/* PHY Low Power Idle Control */
+#define I82579_LPI_CTRL PHY_REG(772, 20)
+#define I82579_LPI_CTRL_100_ENABLE 0x2000
+#define I82579_LPI_CTRL_1000_ENABLE 0x4000
+#define I82579_LPI_CTRL_ENABLE_MASK 0x6000
+#define I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT 0x80
+
+/* Extended Management Interface (EMI) Registers */
+#define I82579_EMI_ADDR 0x10
+#define I82579_EMI_DATA 0x11
+#define I82579_LPI_UPDATE_TIMER 0x4805 /* in 40ns units + 40 ns base value */
+#define I82579_MSE_THRESHOLD 0x084F /* 82579 Mean Square Error Threshold */
+#define I82577_MSE_THRESHOLD 0x0887 /* 82577 Mean Square Error Threshold */
+#define I82579_MSE_LINK_DOWN 0x2411 /* MSE count before dropping link */
+#define I82579_EEE_PCS_STATUS 0x182D /* IEEE MMD Register 3.1 >> 8 */
+#define I82579_EEE_CAPABILITY 0x0410 /* IEEE MMD Register 3.20 */
+#define I82579_EEE_ADVERTISEMENT 0x040E /* IEEE MMD Register 7.60 */
+#define I82579_EEE_LP_ABILITY 0x040F /* IEEE MMD Register 7.61 */
+#define I82579_EEE_100_SUPPORTED (1 << 1) /* 100BaseTx EEE supported */
+#define I82579_EEE_1000_SUPPORTED (1 << 2) /* 1000BaseTx EEE supported */
+#define I217_EEE_PCS_STATUS 0x9401 /* IEEE MMD Register 3.1 */
+#define I217_EEE_CAPABILITY 0x8000 /* IEEE MMD Register 3.20 */
+#define I217_EEE_ADVERTISEMENT 0x8001 /* IEEE MMD Register 7.60 */
+#define I217_EEE_LP_ABILITY 0x8002 /* IEEE MMD Register 7.61 */
+
+#define E1000_EEE_RX_LPI_RCVD 0x0400 /* Tx LP idle received */
+#define E1000_EEE_TX_LPI_RCVD 0x0800 /* Rx LP idle received */
#define PHY_PAGE_SHIFT 5
#define PHY_REG(page, reg) (((page) << PHY_PAGE_SHIFT) | \
@@ -659,6 +659,7 @@ extern s32 e1000_check_polarity_ife(struct e1000_hw *hw);
extern s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw);
extern s32 e1000_check_polarity_igp(struct e1000_hw *hw);
extern bool e1000_check_phy_82574(struct e1000_hw *hw);
+extern s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data);
static inline s32 e1000_phy_hw_reset(struct e1000_hw *hw)
{
@@ -35,6 +35,7 @@
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/vmalloc.h>
+#include <linux/mdio.h>
#include "e1000.h"
@@ -2050,6 +2051,137 @@ static int e1000_get_rxnfc(struct net_device *netdev,
}
}
+static int e1000e_get_eee(struct net_device *netdev, struct ethtool_eee *edata)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u16 cap_addr, adv_addr, lpa_addr, pcs_stat_addr, phy_data, lpi_ctrl;
+ u32 status, ret_val;
+
+ if (!(adapter->flags & FLAG_IS_ICH) ||
+ !(adapter->flags2 & FLAG2_HAS_EEE))
+ return -EOPNOTSUPP;
+
+ switch (hw->phy.type) {
+ case e1000_phy_82579:
+ cap_addr = I82579_EEE_CAPABILITY;
+ adv_addr = I82579_EEE_ADVERTISEMENT;
+ lpa_addr = I82579_EEE_LP_ABILITY;
+ pcs_stat_addr = I82579_EEE_PCS_STATUS;
+ break;
+ case e1000_phy_i217:
+ cap_addr = I217_EEE_CAPABILITY;
+ adv_addr = I217_EEE_ADVERTISEMENT;
+ lpa_addr = I217_EEE_LP_ABILITY;
+ pcs_stat_addr = I217_EEE_PCS_STATUS;
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ return -EBUSY;
+
+ /* EEE Capability */
+ ret_val = e1000_read_emi_reg_locked(hw, cap_addr, &phy_data);
+ if (ret_val)
+ goto release;
+ edata->supported = mmd_eee_cap_to_ethtool_sup_t(phy_data);
+
+ /* EEE Advertised */
+ ret_val = e1000_read_emi_reg_locked(hw, adv_addr, &phy_data);
+ if (ret_val)
+ goto release;
+ edata->advertised = mmd_eee_adv_to_ethtool_adv_t(phy_data);
+
+ /* EEE Link Partner Advertised */
+ ret_val = e1000_read_emi_reg_locked(hw, lpa_addr, &phy_data);
+ if (ret_val)
+ goto release;
+ edata->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(phy_data);
+
+ /* EEE PCS Status */
+ ret_val = e1000_read_emi_reg_locked(hw, pcs_stat_addr, &phy_data);
+ if (hw->phy.type == e1000_phy_82579)
+ phy_data <<= 8;
+
+release:
+ hw->phy.ops.release(hw);
+ if (ret_val)
+ return -ENODATA;
+
+ e1e_rphy(hw, I82579_LPI_CTRL, &lpi_ctrl);
+ status = er32(STATUS);
+
+ /* Result of the EEE auto negotiation - there is no register that
+ * has the status of the EEE negotiation so do a best-guess based
+ * on whether both Tx and Rx LPI indications have been received or
+ * base it on the link speed, the EEE advertised speeds on both ends
+ * and the speeds on which EEE is enabled locally.
+ */
+ if (((phy_data & E1000_EEE_TX_LPI_RCVD) &&
+ (phy_data & E1000_EEE_RX_LPI_RCVD)) ||
+ ((status & E1000_STATUS_SPEED_100) &&
+ (edata->advertised & ADVERTISED_100baseT_Full) &&
+ (edata->lp_advertised & ADVERTISED_100baseT_Full) &&
+ (lpi_ctrl & I82579_LPI_CTRL_100_ENABLE)) ||
+ ((status & E1000_STATUS_SPEED_1000) &&
+ (edata->advertised & ADVERTISED_1000baseT_Full) &&
+ (edata->lp_advertised & ADVERTISED_1000baseT_Full) &&
+ (lpi_ctrl & I82579_LPI_CTRL_1000_ENABLE)))
+ edata->eee_active = true;
+
+ edata->eee_enabled = !hw->dev_spec.ich8lan.eee_disable;
+ edata->tx_lpi_enabled = true;
+ edata->tx_lpi_timer = er32(LPIC) >> E1000_LPIC_LPIET_SHIFT;
+
+ return 0;
+}
+
+static int e1000e_set_eee(struct net_device *netdev, struct ethtool_eee *edata)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct ethtool_eee eee_curr;
+ s32 ret_val;
+
+ if (!(adapter->flags & FLAG_IS_ICH) ||
+ !(adapter->flags2 & FLAG2_HAS_EEE))
+ return -EOPNOTSUPP;
+
+ ret_val = e1000e_get_eee(netdev, &eee_curr);
+ if (ret_val)
+ return ret_val;
+
+ if (eee_curr.advertised != edata->advertised) {
+ e_err("Setting EEE advertisement is not supported\n");
+ return -EINVAL;
+ }
+
+ if (eee_curr.tx_lpi_enabled != edata->tx_lpi_enabled) {
+ e_err("Setting EEE tx-lpi is not supported\n");
+ return -EINVAL;
+ }
+
+ if (eee_curr.tx_lpi_timer != edata->tx_lpi_timer) {
+ e_err("Setting EEE Tx LPI timer is not supported\n");
+ return -EINVAL;
+ }
+
+ if (hw->dev_spec.ich8lan.eee_disable != !edata->eee_enabled) {
+ hw->dev_spec.ich8lan.eee_disable = !edata->eee_enabled;
+
+ /* reset the link */
+ if (netif_running(netdev))
+ e1000e_reinit_locked(adapter);
+ else
+ e1000e_reset(adapter);
+ }
+
+ return 0;
+}
+
static const struct ethtool_ops e1000_ethtool_ops = {
.get_settings = e1000_get_settings,
.set_settings = e1000_set_settings,
@@ -2078,6 +2210,8 @@ static const struct ethtool_ops e1000_ethtool_ops = {
.set_coalesce = e1000_set_coalesce,
.get_rxnfc = e1000_get_rxnfc,
.get_ts_info = ethtool_op_get_ts_info,
+ .get_eee = e1000e_get_eee,
+ .set_eee = e1000e_set_eee,
};
void e1000e_set_ethtool_ops(struct net_device *netdev)
@@ -62,6 +62,7 @@ enum e1e_registers {
E1000_IVAR = 0x000E4, /* Interrupt Vector Allocation - RW */
E1000_EITR_82574_BASE = 0x000E8, /* Interrupt Throttling - RW */
#define E1000_EITR_82574(_n) (E1000_EITR_82574_BASE + (_n << 2))
+ E1000_LPIC = 0x000FC, /* Low Power Idle Control - RW */
E1000_RCTL = 0x00100, /* Rx Control - RW */
E1000_FCTTV = 0x00170, /* Flow Control Transmit Timer Value - RW */
E1000_TXCW = 0x00178, /* Tx Configuration Word - RW */
@@ -148,28 +148,6 @@
#define HV_PM_CTRL PHY_REG(770, 17)
#define HV_PM_CTRL_PLL_STOP_IN_K1_GIGA 0x100
-/* PHY Low Power Idle Control */
-#define I82579_LPI_CTRL PHY_REG(772, 20)
-#define I82579_LPI_CTRL_100_ENABLE 0x2000
-#define I82579_LPI_CTRL_1000_ENABLE 0x4000
-#define I82579_LPI_CTRL_ENABLE_MASK 0x6000
-#define I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT 0x80
-
-/* Extended Management Interface (EMI) Registers */
-#define I82579_EMI_ADDR 0x10
-#define I82579_EMI_DATA 0x11
-#define I82579_LPI_UPDATE_TIMER 0x4805 /* in 40ns units + 40 ns base value */
-#define I82579_MSE_THRESHOLD 0x084F /* 82579 Mean Square Error Threshold */
-#define I82577_MSE_THRESHOLD 0x0887 /* 82577 Mean Square Error Threshold */
-#define I82579_MSE_LINK_DOWN 0x2411 /* MSE count before dropping link */
-#define I82579_EEE_PCS_STATUS 0x182D /* IEEE MMD Register 3.1 >> 8 */
-#define I82579_EEE_LP_ABILITY 0x040F /* IEEE MMD Register 7.61 */
-#define I82579_EEE_100_SUPPORTED (1 << 1) /* 100BaseTx EEE supported */
-#define I82579_EEE_1000_SUPPORTED (1 << 2) /* 1000BaseTx EEE supported */
-#define I217_EEE_PCS_STATUS 0x9401 /* IEEE MMD Register 3.1 */
-#define I217_EEE_ADVERTISEMENT 0x8001 /* IEEE MMD Register 7.60 */
-#define I217_EEE_LP_ABILITY 0x8002 /* IEEE MMD Register 7.61 */
-
/* Intel Rapid Start Technology Support */
#define I217_PROXY_CTRL BM_PHY_REG(BM_WUC_PAGE, 70)
#define I217_PROXY_CTRL_AUTO_DISABLE 0x0080
@@ -829,7 +807,7 @@ static s32 __e1000_access_emi_reg_locked(struct e1000_hw *hw, u16 address,
*
* Assumes the SW/FW/HW Semaphore is already acquired.
**/
-static s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data)
+s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data)
{
return __e1000_access_emi_reg_locked(hw, addr, data, true);
}