Patchwork [v6,1/3] usb: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_id

login
register
mail settings
Submitter Peter Chen
Date Jan. 17, 2013, 10:01 a.m.
Message ID <1358416874-27011-2-git-send-email-peter.chen@freescale.com>
Download mbox | patch
Permalink /patch/213191/
State New
Headers show

Comments

Peter Chen - Jan. 17, 2013, 10:01 a.m.
As mach/hardware.h is deleted, we need to use platform_device_id to
differentiate SoCs. Besides, one cpu_is_mx35 is useless as it has
already used pdata to differentiate runtime

Meanwhile we update the platform code accordingly.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
---
 arch/arm/mach-imx/devices/devices-common.h        |    1 +
 arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c |   15 ++++----
 drivers/usb/gadget/fsl_mxc_udc.c                  |   24 +++++--------
 drivers/usb/gadget/fsl_udc_core.c                 |   38 ++++++++++++---------
 4 files changed, 41 insertions(+), 37 deletions(-)
Fabio Estevam - Jan. 17, 2013, 11:13 a.m.
On Thu, Jan 17, 2013 at 8:01 AM, Peter Chen <peter.chen@freescale.com> wrote:

>         /* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
> -       if (!cpu_is_mx51()) {
> +       if (!strcmp(pdev->id_entry->name, "imx-udc-mx27")) {]]

Shouldn't this be:
 if (!strcmp(pdev->id_entry->name, "imx-udc-mx51"))
Lothar Waßmann - Jan. 17, 2013, 11:25 a.m.
Hi,

Fabio Estevam writes:
> On Thu, Jan 17, 2013 at 8:01 AM, Peter Chen <peter.chen@freescale.com> wrote:
> 
> >         /* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
> > -       if (!cpu_is_mx51()) {
> > +       if (!strcmp(pdev->id_entry->name, "imx-udc-mx27")) {]]
> 
> Shouldn't this be:
>  if (!strcmp(pdev->id_entry->name, "imx-udc-mx51"))
>
The equivalent of !cpu_is_mx51() would be
strcmp(pdev->id_entry->name, "imx-udc-mx51") (without the '!') meaning
id_entry->name is different from "imx-udc-mx51".

I personally hate the '!strcmp()' notation and prefer 'strcmp() == 0'
though they are technically equivalent. Using '==' makes it much
clearer to the reader what is intended.
!strcmp() lets one assume that it is true when the comparison fails,
though actually the opposite is true.


Lothar Waßmann
Fabio Estevam - Jan. 17, 2013, 2:43 p.m.
On Thu, Jan 17, 2013 at 9:25 AM, Lothar Waßmann <LW@karo-electronics.de> wrote:

> The equivalent of !cpu_is_mx51() would be
> strcmp(pdev->id_entry->name, "imx-udc-mx51") (without the '!') meaning
> id_entry->name is different from "imx-udc-mx51".

Yes, agree.

strcmp(pdev->id_entry->name, "imx-udc-mx51") is also better than
!strcmp(pdev->id_entry->name, "imx-udc-mx27"))

because in the case of another soc entry gets added, let's say
"imx-udc-mxyy" then

!strcmp(pdev->id_entry->name, "imx-udc-mx27")) will not correspond to
!cpu_is_mx51() anymore.
Peter Chen - Jan. 18, 2013, 1:51 a.m.
On Thu, Jan 17, 2013 at 12:43:23PM -0200, Fabio Estevam wrote:
> On Thu, Jan 17, 2013 at 9:25 AM, Lothar Waßmann <LW@karo-electronics.de> wrote:
> 
> > The equivalent of !cpu_is_mx51() would be
> > strcmp(pdev->id_entry->name, "imx-udc-mx51") (without the '!') meaning
> > id_entry->name is different from "imx-udc-mx51".

Thanks, Lothar and Fabio, I will change, and send v7.
> 
> Yes, agree.
> 
> strcmp(pdev->id_entry->name, "imx-udc-mx51") is also better than
> !strcmp(pdev->id_entry->name, "imx-udc-mx27"))

We just think this feature only belongs to imx-udc-mx27 type udc
> 
> because in the case of another soc entry gets added, let's say
> "imx-udc-mxyy" then
> 
> !strcmp(pdev->id_entry->name, "imx-udc-mx27")) will not correspond to
> !cpu_is_mx51() anymore.
>

Patch

diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h
index 6277baf..9bd5777 100644
--- a/arch/arm/mach-imx/devices/devices-common.h
+++ b/arch/arm/mach-imx/devices/devices-common.h
@@ -63,6 +63,7 @@  struct platform_device *__init imx_add_flexcan(
 
 #include <linux/fsl_devices.h>
 struct imx_fsl_usb2_udc_data {
+	const char *devid;
 	resource_size_t iobase;
 	resource_size_t irq;
 };
diff --git a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
index 37e4439..3c06bd9 100644
--- a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
+++ b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
@@ -11,35 +11,36 @@ 
 #include "../hardware.h"
 #include "devices-common.h"
 
-#define imx_fsl_usb2_udc_data_entry_single(soc)				\
+#define imx_fsl_usb2_udc_data_entry_single(soc, _devid)			\
 	{								\
+		.devid = _devid,					\
 		.iobase = soc ## _USB_OTG_BASE_ADDR,			\
 		.irq = soc ## _INT_USB_OTG,				\
 	}
 
 #ifdef CONFIG_SOC_IMX25
 const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst =
-	imx_fsl_usb2_udc_data_entry_single(MX25);
+	imx_fsl_usb2_udc_data_entry_single(MX25, "imx-udc-mx27");
 #endif /* ifdef CONFIG_SOC_IMX25 */
 
 #ifdef CONFIG_SOC_IMX27
 const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst =
-	imx_fsl_usb2_udc_data_entry_single(MX27);
+	imx_fsl_usb2_udc_data_entry_single(MX27, "imx-udc-mx27");
 #endif /* ifdef CONFIG_SOC_IMX27 */
 
 #ifdef CONFIG_SOC_IMX31
 const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst =
-	imx_fsl_usb2_udc_data_entry_single(MX31);
+	imx_fsl_usb2_udc_data_entry_single(MX31, "imx-udc-mx27");
 #endif /* ifdef CONFIG_SOC_IMX31 */
 
 #ifdef CONFIG_SOC_IMX35
 const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst =
-	imx_fsl_usb2_udc_data_entry_single(MX35);
+	imx_fsl_usb2_udc_data_entry_single(MX35, "imx-udc-mx27");
 #endif /* ifdef CONFIG_SOC_IMX35 */
 
 #ifdef CONFIG_SOC_IMX51
 const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data __initconst =
-	imx_fsl_usb2_udc_data_entry_single(MX51);
+	imx_fsl_usb2_udc_data_entry_single(MX51, "imx-udc-mx51");
 #endif
 
 struct platform_device *__init imx_add_fsl_usb2_udc(
@@ -57,7 +58,7 @@  struct platform_device *__init imx_add_fsl_usb2_udc(
 			.flags = IORESOURCE_IRQ,
 		},
 	};
-	return imx_add_platform_device_dmamask("fsl-usb2-udc", -1,
+	return imx_add_platform_device_dmamask(data->devid, -1,
 			res, ARRAY_SIZE(res),
 			pdata, sizeof(*pdata), DMA_BIT_MASK(32));
 }
diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c
index 1b0f086..de851e5 100644
--- a/drivers/usb/gadget/fsl_mxc_udc.c
+++ b/drivers/usb/gadget/fsl_mxc_udc.c
@@ -18,8 +18,6 @@ 
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
-#include <mach/hardware.h>
-
 static struct clk *mxc_ahb_clk;
 static struct clk *mxc_per_clk;
 static struct clk *mxc_ipg_clk;
@@ -59,7 +57,7 @@  int fsl_udc_clk_init(struct platform_device *pdev)
 	clk_prepare_enable(mxc_per_clk);
 
 	/* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
-	if (!cpu_is_mx51()) {
+	if (!strcmp(pdev->id_entry->name, "imx-udc-mx27")) {
 		freq = clk_get_rate(mxc_per_clk);
 		if (pdata->phy_mode != FSL_USB2_PHY_ULPI &&
 		    (freq < 59999000 || freq > 60001000)) {
@@ -82,17 +80,15 @@  eclkrate:
 void fsl_udc_clk_finalize(struct platform_device *pdev)
 {
 	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
-	if (cpu_is_mx35()) {
-		unsigned int v;
-
-		/* workaround ENGcm09152 for i.MX35 */
-		if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) {
-			v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
-					USBPHYCTRL_OTGBASE_OFFSET));
-			writel(v | USBPHYCTRL_EVDO,
-				MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
-					USBPHYCTRL_OTGBASE_OFFSET));
-		}
+	unsigned int v;
+
+	/* workaround ENGcm09152 for i.MX35 */
+	if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) {
+		v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
+				USBPHYCTRL_OTGBASE_OFFSET));
+		writel(v | USBPHYCTRL_EVDO,
+			MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
+				USBPHYCTRL_OTGBASE_OFFSET));
 	}
 
 	/* ULPI transceivers don't need usbpll */
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index c19f7f1..5fc1d72 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -41,6 +41,7 @@ 
 #include <linux/fsl_devices.h>
 #include <linux/dmapool.h>
 #include <linux/delay.h>
+#include <linux/of_device.h>
 
 #include <asm/byteorder.h>
 #include <asm/io.h>
@@ -2438,11 +2439,6 @@  static int __init fsl_udc_probe(struct platform_device *pdev)
 	unsigned int i;
 	u32 dccparams;
 
-	if (strcmp(pdev->name, driver_name)) {
-		VDBG("Wrong device");
-		return -ENODEV;
-	}
-
 	udc_controller = kzalloc(sizeof(struct fsl_udc), GFP_KERNEL);
 	if (udc_controller == NULL) {
 		ERR("malloc udc failed\n");
@@ -2756,22 +2752,32 @@  static int fsl_udc_otg_resume(struct device *dev)
 
 	return fsl_udc_resume(NULL);
 }
-
 /*-------------------------------------------------------------------------
 	Register entry point for the peripheral controller driver
 --------------------------------------------------------------------------*/
-
+static const struct platform_device_id fsl_udc_devtype[] = {
+	{
+		.name = "imx-udc-mx27",
+	}, {
+		.name = "imx-udc-mx51",
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(platform, fsl_udc_devtype);
 static struct platform_driver udc_driver = {
-	.remove  = __exit_p(fsl_udc_remove),
+	.remove		= __exit_p(fsl_udc_remove),
+	/* Just for FSL i.mx SoC currently */
+	.id_table	= fsl_udc_devtype,
 	/* these suspend and resume are not usb suspend and resume */
-	.suspend = fsl_udc_suspend,
-	.resume  = fsl_udc_resume,
-	.driver  = {
-		.name = (char *)driver_name,
-		.owner = THIS_MODULE,
-		/* udc suspend/resume called from OTG driver */
-		.suspend = fsl_udc_otg_suspend,
-		.resume  = fsl_udc_otg_resume,
+	.suspend	= fsl_udc_suspend,
+	.resume		= fsl_udc_resume,
+	.driver		= {
+			.name = (char *)driver_name,
+			.owner = THIS_MODULE,
+			/* udc suspend/resume called from OTG driver */
+			.suspend = fsl_udc_otg_suspend,
+			.resume  = fsl_udc_otg_resume,
 	},
 };