diff mbox

[2/5,FWTS-TEST] arg-show-tests-0001: update log to keep in sync with fwts

Message ID 1358246709-27771-3-git-send-email-colin.king@canonical.com
State Accepted
Headers show

Commit Message

Colin Ian King Jan. 15, 2013, 10:45 a.m. UTC
From: Colin Ian King <colin.king@canonical.com>

fwts added some extra spacing in the output and also added a new
test uefirtmisc, so update this test to keep in sync with fwts

Signed-off-by: Colin Ian King <colin.king@canonical.com>
---
 arg-show-tests-0001/arg-show-tests-0001.log | 119 ++++++++++++++--------------
 1 file changed, 60 insertions(+), 59 deletions(-)

Comments

Keng-Yu Lin Jan. 16, 2013, 8:03 a.m. UTC | #1
On Tue, Jan 15, 2013 at 6:45 PM, Colin King <colin.king@canonical.com> wrote:
> From: Colin Ian King <colin.king@canonical.com>
>
> fwts added some extra spacing in the output and also added a new
> test uefirtmisc, so update this test to keep in sync with fwts
>
> Signed-off-by: Colin Ian King <colin.king@canonical.com>
> ---
>  arg-show-tests-0001/arg-show-tests-0001.log | 119 ++++++++++++++--------------
>  1 file changed, 60 insertions(+), 59 deletions(-)
>
> diff --git a/arg-show-tests-0001/arg-show-tests-0001.log b/arg-show-tests-0001/arg-show-tests-0001.log
> index 5be9322..3c6fbef 100644
> --- a/arg-show-tests-0001/arg-show-tests-0001.log
> +++ b/arg-show-tests-0001/arg-show-tests-0001.log
> @@ -1,68 +1,69 @@
>  Batch tests:
> - acpiinfo      General ACPI information check.
> - acpitables    ACPI table settings sanity checks.
> - apicedge      APIC Edge/Level Check.
> - apicinstance  Check for single instance of APIC/MADT table.
> - aspm          PCIe ASPM check.
> - bios32        Check BIOS32 Service Directory.
> - bios_info     Gather BIOS DMI information.
> - checksum      Check ACPI table checksum.
> - cpufreq       CPU frequency scaling tests (takes ~1-2 mins).
> - crs           Check PCI host bridge configuration using _CRS.
> - csm           Check for UEFI Compatibility Support Module.
> - cstates       Check processor C state support.
> - dmar          Check sane DMA Remapping (VT-d).
> - dmi_decode    Test DMI/SMBIOS tables for errors.
> - ebda          Validate EBDA region is mapped and reserved in memory map table.
> - fadt          FADT SCI_EN enabled check.
> - fan           Simple Fan Tests.
> - hda_audio     Check HDA Audio Pin Configs.
> - hpet_check    HPET configuration test.
> - klog          Scan kernel log for errors and warnings.
> - maxfreq       Check max CPU frequencies against max scaling frequency.
> - maxreadreq    Checks firmware has set PCI Express MaxReadReq to a higher value on non-motherboard devices.
> - mcfg          MCFG PCI Express* memory mapped config space.
> - method        ACPI DSDT Method Semantic Tests.
> - microcode     Check if system is using latest microcode.
> - mpcheck       Check MultiProcessor Tables.
> - msr           MSR register tests.
> - mtrr          MTRR validation.
> - nx            Test if CPU NX is disabled by the BIOS.
> - oops          Scan kernel log for Oopses.
> - os2gap        OS/2 memory hole test.
> - osilinux      Disassemble DSDT to check for _OSI("Linux").
> - pcc           Processor Clocking Control (PCC) Test.
> - pciirq        Check PCI IRQ Routing Table.
> - pnp           Check BIOS Support Installation structure.
> - smbios        Check SMBIOS.
> - syntaxcheck   Re-assemble DSDT and find syntax errors and warnings.
> - version       Gather kernel system information.
> - virt          Test CPU Virtualisation Configuration.
> - wakealarm     Test ACPI Wakealarm.
> - wmi           Extract and analyse Windows Management Instrumentation (WMI).
> + acpiinfo        General ACPI information check.
> + acpitables      ACPI table settings sanity checks.
> + apicedge        APIC Edge/Level Check.
> + apicinstance    Check for single instance of APIC/MADT table.
> + aspm            PCIe ASPM check.
> + bios32          Check BIOS32 Service Directory.
> + bios_info       Gather BIOS DMI information.
> + checksum        Check ACPI table checksum.
> + cpufreq         CPU frequency scaling tests (takes ~1-2 mins).
> + crs             Check PCI host bridge configuration using _CRS.
> + csm             Check for UEFI Compatibility Support Module.
> + cstates         Check processor C state support.
> + dmar            Check sane DMA Remapping (VT-d).
> + dmi_decode      Test DMI/SMBIOS tables for errors.
> + ebda            Validate EBDA region is mapped and reserved in memory map table.
> + fadt            FADT SCI_EN enabled check.
> + fan             Simple Fan Tests.
> + hda_audio       Check HDA Audio Pin Configs.
> + hpet_check      HPET configuration test.
> + klog            Scan kernel log for errors and warnings.
> + maxfreq         Check max CPU frequencies against max scaling frequency.
> + maxreadreq      Checks firmware has set PCI Express MaxReadReq to a higher value on non-motherboard devices.
> + mcfg            MCFG PCI Express* memory mapped config space.
> + method          ACPI DSDT Method Semantic Tests.
> + microcode       Check if system is using latest microcode.
> + mpcheck         Check MultiProcessor Tables.
> + msr             MSR register tests.
> + mtrr            MTRR validation.
> + nx              Test if CPU NX is disabled by the BIOS.
> + oops            Scan kernel log for Oopses.
> + os2gap          OS/2 memory hole test.
> + osilinux        Disassemble DSDT to check for _OSI("Linux").
> + pcc             Processor Clocking Control (PCC) Test.
> + pciirq          Check PCI IRQ Routing Table.
> + pnp             Check BIOS Support Installation structure.
> + smbios          Check SMBIOS.
> + syntaxcheck     Re-assemble DSDT and find syntax errors and warnings.
> + version         Gather kernel system information.
> + virt            Test CPU Virtualisation Configuration.
> + wakealarm       Test ACPI Wakealarm.
> + wmi             Extract and analyse Windows Management Instrumentation (WMI).
>
>  Interactive tests:
> - ac_adapter    Interactive ac_adapter power test.
> - battery       Battery Tests.
> - brightness    Interactive LCD brightness test.
> - hotkey        Hotkey scan code tests.
> - lid           Interactive lid button test.
> - power_button  Interactive power_button button test.
> + ac_adapter      Interactive ac_adapter power test.
> + battery         Battery Tests.
> + brightness      Interactive LCD brightness test.
> + hotkey          Hotkey scan code tests.
> + lid             Interactive lid button test.
> + power_button    Interactive power_button button test.
>
>  Power States tests:
> - s3            S3 suspend/resume test.
> - s3power       S3 power loss during suspend test (takes minimum of 10 minutes to run).
> - s4            S4 hibernate/resume test.
> + s3              S3 suspend/resume test.
> + s3power         S3 power loss during suspend test (takes minimum of 10 minutes to run).
> + s4              S4 hibernate/resume test.
>
>  Utilities:
> - acpidump      Dump ACPI tables.
> - cmosdump      Dump CMOS Memory.
> - ebdadump      Dump EBDA region.
> - memmapdump    Dump system memory map.
> - mpdump        Dump MultiProcessor Data.
> - romdump       Dump ROM data.
> - uefidump      Dump UEFI variables.
> + acpidump        Dump ACPI tables.
> + cmosdump        Dump CMOS Memory.
> + ebdadump        Dump EBDA region.
> + memmapdump      Dump system memory map.
> + mpdump          Dump MultiProcessor Data.
> + romdump         Dump ROM data.
> + uefidump        Dump UEFI variables.
>
>  Unsafe tests:
> - uefirttime    UEFI Runtime service time interface tests.
> - uefirtvariabl UEFI Runtime service variable interface tests.
> + uefirtmisc      UEFI miscellaneous runtime service interface tests.
> + uefirttime      UEFI Runtime service time interface tests.
> + uefirtvariable  UEFI Runtime service variable interface tests.
> --
> 1.8.0
>
>
Acked-by: Keng-Yu Lin <kengyu@canonical.com>
Ivan Hu Jan. 16, 2013, 8:32 a.m. UTC | #2
On 01/15/2013 06:45 PM, Colin King wrote:
> From: Colin Ian King <colin.king@canonical.com>
>
> fwts added some extra spacing in the output and also added a new
> test uefirtmisc, so update this test to keep in sync with fwts
>
> Signed-off-by: Colin Ian King <colin.king@canonical.com>
> ---
>   arg-show-tests-0001/arg-show-tests-0001.log | 119 ++++++++++++++--------------
>   1 file changed, 60 insertions(+), 59 deletions(-)
>
> diff --git a/arg-show-tests-0001/arg-show-tests-0001.log b/arg-show-tests-0001/arg-show-tests-0001.log
> index 5be9322..3c6fbef 100644
> --- a/arg-show-tests-0001/arg-show-tests-0001.log
> +++ b/arg-show-tests-0001/arg-show-tests-0001.log
> @@ -1,68 +1,69 @@
>   Batch tests:
> - acpiinfo      General ACPI information check.
> - acpitables    ACPI table settings sanity checks.
> - apicedge      APIC Edge/Level Check.
> - apicinstance  Check for single instance of APIC/MADT table.
> - aspm          PCIe ASPM check.
> - bios32        Check BIOS32 Service Directory.
> - bios_info     Gather BIOS DMI information.
> - checksum      Check ACPI table checksum.
> - cpufreq       CPU frequency scaling tests (takes ~1-2 mins).
> - crs           Check PCI host bridge configuration using _CRS.
> - csm           Check for UEFI Compatibility Support Module.
> - cstates       Check processor C state support.
> - dmar          Check sane DMA Remapping (VT-d).
> - dmi_decode    Test DMI/SMBIOS tables for errors.
> - ebda          Validate EBDA region is mapped and reserved in memory map table.
> - fadt          FADT SCI_EN enabled check.
> - fan           Simple Fan Tests.
> - hda_audio     Check HDA Audio Pin Configs.
> - hpet_check    HPET configuration test.
> - klog          Scan kernel log for errors and warnings.
> - maxfreq       Check max CPU frequencies against max scaling frequency.
> - maxreadreq    Checks firmware has set PCI Express MaxReadReq to a higher value on non-motherboard devices.
> - mcfg          MCFG PCI Express* memory mapped config space.
> - method        ACPI DSDT Method Semantic Tests.
> - microcode     Check if system is using latest microcode.
> - mpcheck       Check MultiProcessor Tables.
> - msr           MSR register tests.
> - mtrr          MTRR validation.
> - nx            Test if CPU NX is disabled by the BIOS.
> - oops          Scan kernel log for Oopses.
> - os2gap        OS/2 memory hole test.
> - osilinux      Disassemble DSDT to check for _OSI("Linux").
> - pcc           Processor Clocking Control (PCC) Test.
> - pciirq        Check PCI IRQ Routing Table.
> - pnp           Check BIOS Support Installation structure.
> - smbios        Check SMBIOS.
> - syntaxcheck   Re-assemble DSDT and find syntax errors and warnings.
> - version       Gather kernel system information.
> - virt          Test CPU Virtualisation Configuration.
> - wakealarm     Test ACPI Wakealarm.
> - wmi           Extract and analyse Windows Management Instrumentation (WMI).
> + acpiinfo        General ACPI information check.
> + acpitables      ACPI table settings sanity checks.
> + apicedge        APIC Edge/Level Check.
> + apicinstance    Check for single instance of APIC/MADT table.
> + aspm            PCIe ASPM check.
> + bios32          Check BIOS32 Service Directory.
> + bios_info       Gather BIOS DMI information.
> + checksum        Check ACPI table checksum.
> + cpufreq         CPU frequency scaling tests (takes ~1-2 mins).
> + crs             Check PCI host bridge configuration using _CRS.
> + csm             Check for UEFI Compatibility Support Module.
> + cstates         Check processor C state support.
> + dmar            Check sane DMA Remapping (VT-d).
> + dmi_decode      Test DMI/SMBIOS tables for errors.
> + ebda            Validate EBDA region is mapped and reserved in memory map table.
> + fadt            FADT SCI_EN enabled check.
> + fan             Simple Fan Tests.
> + hda_audio       Check HDA Audio Pin Configs.
> + hpet_check      HPET configuration test.
> + klog            Scan kernel log for errors and warnings.
> + maxfreq         Check max CPU frequencies against max scaling frequency.
> + maxreadreq      Checks firmware has set PCI Express MaxReadReq to a higher value on non-motherboard devices.
> + mcfg            MCFG PCI Express* memory mapped config space.
> + method          ACPI DSDT Method Semantic Tests.
> + microcode       Check if system is using latest microcode.
> + mpcheck         Check MultiProcessor Tables.
> + msr             MSR register tests.
> + mtrr            MTRR validation.
> + nx              Test if CPU NX is disabled by the BIOS.
> + oops            Scan kernel log for Oopses.
> + os2gap          OS/2 memory hole test.
> + osilinux        Disassemble DSDT to check for _OSI("Linux").
> + pcc             Processor Clocking Control (PCC) Test.
> + pciirq          Check PCI IRQ Routing Table.
> + pnp             Check BIOS Support Installation structure.
> + smbios          Check SMBIOS.
> + syntaxcheck     Re-assemble DSDT and find syntax errors and warnings.
> + version         Gather kernel system information.
> + virt            Test CPU Virtualisation Configuration.
> + wakealarm       Test ACPI Wakealarm.
> + wmi             Extract and analyse Windows Management Instrumentation (WMI).
>
>   Interactive tests:
> - ac_adapter    Interactive ac_adapter power test.
> - battery       Battery Tests.
> - brightness    Interactive LCD brightness test.
> - hotkey        Hotkey scan code tests.
> - lid           Interactive lid button test.
> - power_button  Interactive power_button button test.
> + ac_adapter      Interactive ac_adapter power test.
> + battery         Battery Tests.
> + brightness      Interactive LCD brightness test.
> + hotkey          Hotkey scan code tests.
> + lid             Interactive lid button test.
> + power_button    Interactive power_button button test.
>
>   Power States tests:
> - s3            S3 suspend/resume test.
> - s3power       S3 power loss during suspend test (takes minimum of 10 minutes to run).
> - s4            S4 hibernate/resume test.
> + s3              S3 suspend/resume test.
> + s3power         S3 power loss during suspend test (takes minimum of 10 minutes to run).
> + s4              S4 hibernate/resume test.
>
>   Utilities:
> - acpidump      Dump ACPI tables.
> - cmosdump      Dump CMOS Memory.
> - ebdadump      Dump EBDA region.
> - memmapdump    Dump system memory map.
> - mpdump        Dump MultiProcessor Data.
> - romdump       Dump ROM data.
> - uefidump      Dump UEFI variables.
> + acpidump        Dump ACPI tables.
> + cmosdump        Dump CMOS Memory.
> + ebdadump        Dump EBDA region.
> + memmapdump      Dump system memory map.
> + mpdump          Dump MultiProcessor Data.
> + romdump         Dump ROM data.
> + uefidump        Dump UEFI variables.
>
>   Unsafe tests:
> - uefirttime    UEFI Runtime service time interface tests.
> - uefirtvariabl UEFI Runtime service variable interface tests.
> + uefirtmisc      UEFI miscellaneous runtime service interface tests.
> + uefirttime      UEFI Runtime service time interface tests.
> + uefirtvariable  UEFI Runtime service variable interface tests.
>
Acked-by: Ivan Hu <ivan.hu@canonical.com>
diff mbox

Patch

diff --git a/arg-show-tests-0001/arg-show-tests-0001.log b/arg-show-tests-0001/arg-show-tests-0001.log
index 5be9322..3c6fbef 100644
--- a/arg-show-tests-0001/arg-show-tests-0001.log
+++ b/arg-show-tests-0001/arg-show-tests-0001.log
@@ -1,68 +1,69 @@ 
 Batch tests:
- acpiinfo      General ACPI information check.
- acpitables    ACPI table settings sanity checks.
- apicedge      APIC Edge/Level Check.
- apicinstance  Check for single instance of APIC/MADT table.
- aspm          PCIe ASPM check.
- bios32        Check BIOS32 Service Directory.
- bios_info     Gather BIOS DMI information.
- checksum      Check ACPI table checksum.
- cpufreq       CPU frequency scaling tests (takes ~1-2 mins).
- crs           Check PCI host bridge configuration using _CRS.
- csm           Check for UEFI Compatibility Support Module.
- cstates       Check processor C state support.
- dmar          Check sane DMA Remapping (VT-d).
- dmi_decode    Test DMI/SMBIOS tables for errors.
- ebda          Validate EBDA region is mapped and reserved in memory map table.
- fadt          FADT SCI_EN enabled check.
- fan           Simple Fan Tests.
- hda_audio     Check HDA Audio Pin Configs.
- hpet_check    HPET configuration test.
- klog          Scan kernel log for errors and warnings.
- maxfreq       Check max CPU frequencies against max scaling frequency.
- maxreadreq    Checks firmware has set PCI Express MaxReadReq to a higher value on non-motherboard devices.
- mcfg          MCFG PCI Express* memory mapped config space.
- method        ACPI DSDT Method Semantic Tests.
- microcode     Check if system is using latest microcode.
- mpcheck       Check MultiProcessor Tables.
- msr           MSR register tests.
- mtrr          MTRR validation.
- nx            Test if CPU NX is disabled by the BIOS.
- oops          Scan kernel log for Oopses.
- os2gap        OS/2 memory hole test.
- osilinux      Disassemble DSDT to check for _OSI("Linux").
- pcc           Processor Clocking Control (PCC) Test.
- pciirq        Check PCI IRQ Routing Table.
- pnp           Check BIOS Support Installation structure.
- smbios        Check SMBIOS.
- syntaxcheck   Re-assemble DSDT and find syntax errors and warnings.
- version       Gather kernel system information.
- virt          Test CPU Virtualisation Configuration.
- wakealarm     Test ACPI Wakealarm.
- wmi           Extract and analyse Windows Management Instrumentation (WMI).
+ acpiinfo        General ACPI information check.
+ acpitables      ACPI table settings sanity checks.
+ apicedge        APIC Edge/Level Check.
+ apicinstance    Check for single instance of APIC/MADT table.
+ aspm            PCIe ASPM check.
+ bios32          Check BIOS32 Service Directory.
+ bios_info       Gather BIOS DMI information.
+ checksum        Check ACPI table checksum.
+ cpufreq         CPU frequency scaling tests (takes ~1-2 mins).
+ crs             Check PCI host bridge configuration using _CRS.
+ csm             Check for UEFI Compatibility Support Module.
+ cstates         Check processor C state support.
+ dmar            Check sane DMA Remapping (VT-d).
+ dmi_decode      Test DMI/SMBIOS tables for errors.
+ ebda            Validate EBDA region is mapped and reserved in memory map table.
+ fadt            FADT SCI_EN enabled check.
+ fan             Simple Fan Tests.
+ hda_audio       Check HDA Audio Pin Configs.
+ hpet_check      HPET configuration test.
+ klog            Scan kernel log for errors and warnings.
+ maxfreq         Check max CPU frequencies against max scaling frequency.
+ maxreadreq      Checks firmware has set PCI Express MaxReadReq to a higher value on non-motherboard devices.
+ mcfg            MCFG PCI Express* memory mapped config space.
+ method          ACPI DSDT Method Semantic Tests.
+ microcode       Check if system is using latest microcode.
+ mpcheck         Check MultiProcessor Tables.
+ msr             MSR register tests.
+ mtrr            MTRR validation.
+ nx              Test if CPU NX is disabled by the BIOS.
+ oops            Scan kernel log for Oopses.
+ os2gap          OS/2 memory hole test.
+ osilinux        Disassemble DSDT to check for _OSI("Linux").
+ pcc             Processor Clocking Control (PCC) Test.
+ pciirq          Check PCI IRQ Routing Table.
+ pnp             Check BIOS Support Installation structure.
+ smbios          Check SMBIOS.
+ syntaxcheck     Re-assemble DSDT and find syntax errors and warnings.
+ version         Gather kernel system information.
+ virt            Test CPU Virtualisation Configuration.
+ wakealarm       Test ACPI Wakealarm.
+ wmi             Extract and analyse Windows Management Instrumentation (WMI).
 
 Interactive tests:
- ac_adapter    Interactive ac_adapter power test.
- battery       Battery Tests.
- brightness    Interactive LCD brightness test.
- hotkey        Hotkey scan code tests.
- lid           Interactive lid button test.
- power_button  Interactive power_button button test.
+ ac_adapter      Interactive ac_adapter power test.
+ battery         Battery Tests.
+ brightness      Interactive LCD brightness test.
+ hotkey          Hotkey scan code tests.
+ lid             Interactive lid button test.
+ power_button    Interactive power_button button test.
 
 Power States tests:
- s3            S3 suspend/resume test.
- s3power       S3 power loss during suspend test (takes minimum of 10 minutes to run).
- s4            S4 hibernate/resume test.
+ s3              S3 suspend/resume test.
+ s3power         S3 power loss during suspend test (takes minimum of 10 minutes to run).
+ s4              S4 hibernate/resume test.
 
 Utilities:
- acpidump      Dump ACPI tables.
- cmosdump      Dump CMOS Memory.
- ebdadump      Dump EBDA region.
- memmapdump    Dump system memory map.
- mpdump        Dump MultiProcessor Data.
- romdump       Dump ROM data.
- uefidump      Dump UEFI variables.
+ acpidump        Dump ACPI tables.
+ cmosdump        Dump CMOS Memory.
+ ebdadump        Dump EBDA region.
+ memmapdump      Dump system memory map.
+ mpdump          Dump MultiProcessor Data.
+ romdump         Dump ROM data.
+ uefidump        Dump UEFI variables.
 
 Unsafe tests:
- uefirttime    UEFI Runtime service time interface tests.
- uefirtvariabl UEFI Runtime service variable interface tests.
+ uefirtmisc      UEFI miscellaneous runtime service interface tests.
+ uefirttime      UEFI Runtime service time interface tests.
+ uefirtvariable  UEFI Runtime service variable interface tests.