Patchwork ping Re: [patch] multiarch backports for the 4.7 and 4.6 branches

login
register
mail settings
Submitter Matthias Klose
Date Jan. 14, 2013, 4:09 p.m.
Message ID <50F42DC0.3050305@ubuntu.com>
Download mbox | patch
Permalink /patch/211832/
State New
Headers show

Comments

Matthias Klose - Jan. 14, 2013, 4:09 p.m.
Am 27.11.2012 12:20, schrieb Matthias Klose:
> Please find attached backports of the multiarch patches for the active branches.
> 
> The 4.7 patch was tested on a multiarch system (armel, armhf i386, amd64,
> powerpc, powerpc64, sparc, s390, s390x, mips, mipsel), on a non-multiarch system
> (armel, sparc, ia64, powerpc, i386, amd64), with a cross build (armhf, both
> multiarch and non-multiarch), with explicit configure options --enable-multiarch
> and --disable-multiarch.
> 
> The 4.6 patch was tested on a multiarch system (armel, armhf i386, amd64,
> powerpc, powerpc64, sparc, s390, s390x, mips, mipsel), on a non-multiarch system
> (i386, amd64), with a cross build (armhf, both multiarch and non-multiarch),
> with explicit configure options --enable-multiarch and --disable-multiarch.
> 
> If no new issues are found on the trunk, then I would like to put this on the
> branches at the end of next week, if possible.
> 
> Thanks for considering the backports

ping on the backports, attaching two new versions which do include the
powerpcspe and kfreebsd fixes from 2012-12-19/20.

  Matthias
Jakub Jelinek - Jan. 14, 2013, 4:21 p.m.
On Mon, Jan 14, 2013 at 05:09:36PM +0100, Matthias Klose wrote:
> ping on the backports, attaching two new versions which do include the
> powerpcspe and kfreebsd fixes from 2012-12-19/20.

Ok, but please watch for fallouts.

> 2012-11-20  Matthias Klose  <doko@ubuntu.com>
> 
> 	* doc/invoke.texi: Document -print-multiarch.
> 	* doc/install.texi: Document --enable-multiarch.
> 	* doc/fragments.texi: Document MULTILIB_OSDIRNAMES, MULTIARCH_DIRNAME.
> 	* configure.ac: Add --enable-multiarch option.
> 	Substitute with_cpu, with_float.
> 	* configure: Regenerate.
> 	* Makefile.in (s-mlib): Pass MULTIARCH_DIRNAME to genmultilib.
> 	enable_multiarch, with_cpu, with_float: New macros.
> 	if_multiarch: New macro, define in terms of enable_multiarch.
> 	* genmultilib: Add new argument for the multiarch name.
> 	* gcc.c (multiarch_dir): Define.
> 	(for_each_path): Search for multiarch suffixes.
> 	(driver_handle_option): Handle multiarch option.
> 	(do_spec_1): Pass -imultiarch if defined.
> 	(main): Print multiarch.
> 	(set_multilib_dir): Separate multilib and multiarch names
> 	from multilib_select.
> 	(print_multilib_info): Ignore multiarch names in multilib_select.
> 	* incpath.c (add_standard_paths): Search the multiarch include dirs.
> 	* cppdefault.h (default_include): Document multiarch in multilib
> 	member.
> 	* cppdefault.c: [LOCAL_INCLUDE_DIR, STANDARD_INCLUDE_DIR] Add an
>         include directory for multiarch directories.

Wrong whitespace at the start of the above line?

	Jakub

Patch

2012-11-20  Matthias Klose  <doko@ubuntu.com>

	* doc/invoke.texi: Document -print-multiarch.
	* doc/install.texi: Document --enable-multiarch.
	* doc/fragments.texi: Document MULTILIB_OSDIRNAMES, MULTIARCH_DIRNAME.
	* configure.ac: Add --enable-multiarch option.
	Substitute with_cpu, with_float.
	* configure: Regenerate.
	* Makefile.in (s-mlib): Pass MULTIARCH_DIRNAME to genmultilib.
	enable_multiarch, with_cpu, with_float: New macros.
	if_multiarch: New macro, define in terms of enable_multiarch.
	* genmultilib: Add new argument for the multiarch name.
	* gcc.c (multiarch_dir): Define.
	(for_each_path): Search for multiarch suffixes.
	(driver_handle_option): Handle multiarch option.
	(do_spec_1): Pass -imultiarch if defined.
	(main): Print multiarch.
	(set_multilib_dir): Separate multilib and multiarch names
	from multilib_select.
	(print_multilib_info): Ignore multiarch names in multilib_select.
	* incpath.c (add_standard_paths): Search the multiarch include dirs.
	* cppdefault.h (default_include): Document multiarch in multilib
	member.
	* cppdefault.c: [LOCAL_INCLUDE_DIR, STANDARD_INCLUDE_DIR] Add an
        include directory for multiarch directories.
	* common.opt: New options --print-multiarch and -imultilib.

	* config.gcc <i[34567]86-*-linux* | x86_64-*-linux*> (tmake_file):
	Include i386/t-linux.
	<i[34567]86-*-kfreebsd*-gnu | x86_64-*-kfreebsd*-gnu> (tmake_file):
	Include i386/t-kfreebsd.
	<i[34567]86-*-gnu*> (tmake_file): Include i386/t-gnu.
	* config/i386/t-linux64: Add multiarch names in
	MULTILIB_OSDIRNAMES, define MULTIARCH_DIRNAME.
	* config/i386/t-gnu: New file.
	* config/i386/t-kfreebsd: Likewise.
	* config/i386/t-linux: Likewise.

	* config/sparc/t-linux64: Add multiarch names in MULTILIB_OSDIRNAMES.
	* config/sparc/t-linux: New file; define MULTIARCH_DIRNAME.
	* config.gcc <sparc-*-linux*> (tmake_file): Include sparc/t-linux
	for 32bit non-biarch configurations.

	* config/pa/t-linux: New file; define MULTIARCH_DIRNAME.
	* config.gcc <hppa*64*-*-linux*, hppa*-*-linux*> (tmake_file):
	Include pa/t-linux.

	* config/mips/t-linux64: Add multiarch names in MULTILIB_OSDIRNAMES.

	* config/arm/t-linux-eabi: Define MULTIARCH_DIRNAME for linux target.

	* config/rs6000/t-linux64: Add multiarch names in MULTILIB_OSDIRNAMES.
	* config/rs6000/t-linux: New file; define MULTIARCH_DIRNAME.
	* config/rs6000/t-fprules (SOFT_FLOAT_CPUS): New macro. Add e300c2
	to the list.
	(MULTILIB_MATCHES_FLOAT): Define in terms of SOFT_FLOAT_CPUS.
	* config.gcc <powerpc-*-linux* | powerpc64-*-linux*> (tmake_file):
	Include rs6000/t-linux for 32bit non-biarch configurations.

	* config/s390/t-linux64: Add multiarch names in MULTILIB_OSDIRNAMES.

	* config/m68k/t-linux: Define MULTIARCH_DIRNAME.

	* config/ia64/t-linux: New file; define MULTIARCH_DIRNAME.
	* config.gcc <ia64*-*-linux*> (tmake_file): Include ia64/t-linux.

	* config/alpha/t-linux: New file; define MULTIARCH_DIRNAME.
	* config.gcc <alpha*-*-linux*> (tmake_file): Include alpha/t-linux.
Index: gcc/incpath.c
===================================================================
--- gcc/incpath.c	(Revision 195102)
+++ gcc/incpath.c	(Arbeitskopie)
@@ -150,8 +150,14 @@ 
 	      if (!filename_ncmp (p->fname, cpp_GCC_INCLUDE_DIR, len))
 		{
 		  char *str = concat (iprefix, p->fname + len, NULL);
-		  if (p->multilib && imultilib)
+		  if (p->multilib == 1 && imultilib)
 		    str = concat (str, dir_separator_str, imultilib, NULL);
+		  else if (p->multilib == 2)
+		    {
+		      if (!imultiarch)
+			continue;
+		      str = concat (str, dir_separator_str, imultiarch, NULL);
+		    }
 		  add_path (str, SYSTEM, p->cxx_aware, false);
 		}
 	    }
@@ -203,8 +209,14 @@ 
 	  else
 	    str = update_path (p->fname, p->component);
 
-	  if (p->multilib && imultilib)
+	  if (p->multilib == 1 && imultilib)
 	    str = concat (str, dir_separator_str, imultilib, NULL);
+	  else if (p->multilib == 2)
+	    {
+	      if (!imultiarch)
+		continue;
+	      str = concat (str, dir_separator_str, imultiarch, NULL);
+	    }
 
 	  add_path (str, SYSTEM, p->cxx_aware, false);
 	}
Index: gcc/Makefile.in
===================================================================
--- gcc/Makefile.in	(Revision 195102)
+++ gcc/Makefile.in	(Arbeitskopie)
@@ -540,6 +540,21 @@ 
 extra_opt_files=@extra_opt_files@
 host_hook_obj=@out_host_hook_obj@
 
+# Multiarch support
+enable_multiarch = @enable_multiarch@
+with_cpu = @with_cpu@
+with_float = @with_float@
+ifeq ($(enable_multiarch),yes)
+  if_multiarch = $(1)
+else
+  ifeq ($(enable_multiarch),auto)
+    # SYSTEM_HEADER_DIR is makefile syntax, cannot be evaluated in configure.ac
+    if_multiarch = $(if $(wildcard $(shell echo $(SYSTEM_HEADER_DIR))/../../usr/lib/*/crti.o),$(1))
+  else
+    if_multiarch =
+  endif
+endif
+
 # ------------------------
 # Installation directories
 # ------------------------
@@ -1833,10 +1848,11 @@ 
 	    "$(MULTILIB_EXTRA_OPTS)" \
 	    "$(MULTILIB_EXCLUSIONS)" \
 	    "$(MULTILIB_OSDIRNAMES)" \
+	    "$(MULTIARCH_DIRNAME)" \
 	    "@enable_multilib@" \
 	    > tmp-mlib.h; \
 	else \
-	  $(SHELL) $(srcdir)/genmultilib '' '' '' '' '' '' '' no \
+	  $(SHELL) $(srcdir)/genmultilib '' '' '' '' '' '' '' "$(MULTIARCH_DIRNAME)" no \
 	    > tmp-mlib.h; \
 	fi
 	$(SHELL) $(srcdir)/../move-if-change tmp-mlib.h multilib.h
Index: gcc/gcc.c
===================================================================
--- gcc/gcc.c	(Revision 195102)
+++ gcc/gcc.c	(Arbeitskopie)
@@ -1153,6 +1153,11 @@ 
    set_multilib_dir based on the compilation options.  */
 
 static const char *multilib_os_dir;
+
+/* Subdirectory to use for locating libraries in multiarch conventions.  Set by
+   set_multilib_dir based on the compilation options.  */
+
+static const char *multiarch_dir;
 
 /* Structure to keep track of the specs that have been defined so far.
    These are accessed using %(specname) in a compiler or link
@@ -2078,6 +2083,7 @@ 
   struct prefix_list *pl;
   const char *multi_dir = NULL;
   const char *multi_os_dir = NULL;
+  const char *multiarch_suffix = NULL;
   const char *multi_suffix;
   const char *just_multi_suffix;
   char *path = NULL;
@@ -2095,11 +2101,14 @@ 
     }
   if (do_multi && multilib_os_dir && strcmp (multilib_os_dir, ".") != 0)
     multi_os_dir = concat (multilib_os_dir, dir_separator_str, NULL);
+  if (multiarch_dir)
+    multiarch_suffix = concat (multiarch_dir, dir_separator_str, NULL);
 
   while (1)
     {
       size_t multi_dir_len = 0;
       size_t multi_os_dir_len = 0;
+      size_t multiarch_len = 0;
       size_t suffix_len;
       size_t just_suffix_len;
       size_t len;
@@ -2108,16 +2117,15 @@ 
 	multi_dir_len = strlen (multi_dir);
       if (multi_os_dir)
 	multi_os_dir_len = strlen (multi_os_dir);
+      if (multiarch_suffix)
+	multiarch_len = strlen (multiarch_suffix);
       suffix_len = strlen (multi_suffix);
       just_suffix_len = strlen (just_multi_suffix);
 
       if (path == NULL)
 	{
 	  len = paths->max_len + extra_space + 1;
-	  if (suffix_len > multi_os_dir_len)
-	    len += suffix_len;
-	  else
-	    len += multi_os_dir_len;
+	  len += MAX (MAX (suffix_len, multi_os_dir_len), multiarch_len);
 	  path = XNEWVEC (char, len);
 	}
 
@@ -2146,6 +2154,16 @@ 
 		break;
 	    }
 
+	  /* Now try the multiarch path.  */
+	  if (!skip_multi_dir
+	      && !pl->require_machine_suffix && multiarch_dir)
+	    {
+	      memcpy (path + len, multiarch_suffix, multiarch_len + 1);
+	      ret = callback (path, callback_info);
+	      if (ret)
+		break;
+	    }
+
 	  /* Now try the base path.  */
 	  if (!pl->require_machine_suffix
 	      && !(pl->os_multilib ? skip_multi_os_dir : skip_multi_dir))
@@ -2970,6 +2988,9 @@ 
   fputs (_("  -print-libgcc-file-name  Display the name of the compiler's companion library\n"), stdout);
   fputs (_("  -print-file-name=<lib>   Display the full path to library <lib>\n"), stdout);
   fputs (_("  -print-prog-name=<prog>  Display the full path to compiler component <prog>\n"), stdout);
+  fputs (_("\
+  -print-multiarch         Display the target's normalized GNU triplet, used as\n\
+                           a component in the library path\n"), stdout);
   fputs (_("  -print-multi-directory   Display the root directory for versions of libgcc\n"), stdout);
   fputs (_("\
   -print-multi-lib         Display the mapping between command line options and\n\
@@ -3244,6 +3265,7 @@ 
     case OPT_print_multi_directory:
     case OPT_print_sysroot:
     case OPT_print_multi_os_directory:
+    case OPT_print_multiarch:
     case OPT_print_sysroot_headers_suffix:
     case OPT_time:
     case OPT_wrapper:
@@ -4896,6 +4918,15 @@ 
 		  do_spec_1 (" ", 0, NULL);
 		}
 
+	      if (multiarch_dir)
+		{
+		  do_spec_1 ("-imultiarch", 1, NULL);
+		  /* Make this a separate argument.  */
+		  do_spec_1 (" ", 0, NULL);
+		  do_spec_1 (multiarch_dir, 1, NULL);
+		  do_spec_1 (" ", 0, NULL);
+		}
+
 	      if (gcc_exec_prefix)
 		{
 		  do_spec_1 ("-iprefix", 1, NULL);
@@ -6532,6 +6563,15 @@ 
       return (0);
     }
 
+  if (print_multiarch)
+    {
+      if (multiarch_dir == NULL)
+	printf ("\n");
+      else
+	printf ("%s\n", multiarch_dir);
+      return (0);
+    }
+
   if (print_sysroot)
     {
       if (target_system_root)
@@ -7302,7 +7342,9 @@ 
    options are present, then we will ignore this completely. Passing
    that, gcc will consider each multilib_select in turn using the same
    rules for matching the options. If a match is found, that subdirectory
-   will be used.  */
+   will be used.
+   A subdirectory name is optionally followed by a colon and the corresponding
+   multiarch name.  */
 
 static void
 set_multilib_dir (void)
@@ -7514,10 +7556,25 @@ 
 	    q++;
 	  if (q < end)
 	    {
-	      char *new_multilib_os_dir = XNEWVEC (char, end - q);
-	      memcpy (new_multilib_os_dir, q + 1, end - q - 1);
-	      new_multilib_os_dir[end - q - 1] = '\0';
-	      multilib_os_dir = new_multilib_os_dir;
+	      const char *q2 = q + 1, *ml_end = end;
+	      char *new_multilib_os_dir;
+
+	      while (q2 < end && *q2 != ':')
+		q2++;
+	      if (*q2 == ':')
+		ml_end = q2;
+	      new_multilib_os_dir = XNEWVEC (char, ml_end - q);
+	      memcpy (new_multilib_os_dir, q + 1, ml_end - q - 1);
+	      new_multilib_os_dir[ml_end - q - 1] = '\0';
+	      multilib_os_dir = *new_multilib_os_dir ? new_multilib_os_dir : ".";
+
+	      if (q2 < end && *q2 == ':')
+		{
+		  char *new_multiarch_dir = XNEWVEC (char, end - q2);
+		  memcpy (new_multiarch_dir, q2 + 1, end - q2 - 1);
+		  new_multiarch_dir[end - q2 - 1] = '\0';
+		  multiarch_dir = new_multiarch_dir;
+		}
 	      break;
 	    }
 	}
@@ -7577,9 +7634,10 @@ 
 	}
 
       /* When --disable-multilib was used but target defines
-	 MULTILIB_OSDIRNAMES, entries starting with .: are there just
-	 to find multilib_os_dir, so skip them from output.  */
-      if (this_path[0] == '.' && this_path[1] == ':')
+	 MULTILIB_OSDIRNAMES, entries starting with .: (and not starting
+         with .:: for multiarch configurations) are there just to find
+         multilib_os_dir, so skip them from output.  */
+      if (this_path[0] == '.' && this_path[1] == ':' && this_path[2] != ':')
 	skip = 1;
 
       /* Check for matches with the multilib_exclusions. We don't bother
Index: gcc/cppdefault.c
===================================================================
--- gcc/cppdefault.c	(Revision 195102)
+++ gcc/cppdefault.c	(Arbeitskopie)
@@ -63,6 +63,7 @@ 
 #endif
 #ifdef LOCAL_INCLUDE_DIR
     /* /usr/local/include comes before the fixincluded header files.  */
+    { LOCAL_INCLUDE_DIR, 0, 0, 1, 1, 2 },
     { LOCAL_INCLUDE_DIR, 0, 0, 1, 1, 0 },
 #endif
 #ifdef PREFIX_INCLUDE_DIR
@@ -90,6 +91,7 @@ 
 #endif
 #ifdef NATIVE_SYSTEM_HEADER_DIR
     /* /usr/include comes dead last.  */
+    { NATIVE_SYSTEM_HEADER_DIR, NATIVE_SYSTEM_HEADER_COMPONENT, 0, 0, 1, 2 },
     { NATIVE_SYSTEM_HEADER_DIR, NATIVE_SYSTEM_HEADER_COMPONENT, 0, 0, 1, 0 },
 #endif
     { 0, 0, 0, 0, 0, 0 }
Index: gcc/cppdefault.h
===================================================================
--- gcc/cppdefault.h	(Revision 195102)
+++ gcc/cppdefault.h	(Arbeitskopie)
@@ -1,6 +1,6 @@ 
 /* CPP Library.
    Copyright (C) 1986, 1987, 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
-   1999, 2000, 2003, 2004, 2006, 2007 Free Software Foundation, Inc.
+   1999, 2000, 2003, 2004, 2006, 2007, 2012 Free Software Foundation, Inc.
    Contributed by Per Bothner, 1994-95.
    Based on CCCP program by Paul Rubin, June 1986
    Adapted to ANSI C, Richard Stallman, Jan 1987
@@ -43,9 +43,11 @@ 
 				   C++.  */
   const char add_sysroot;	/* FNAME should be prefixed by
 				   cpp_SYSROOT.  */
-  const char multilib;		/* FNAME should have the multilib path
-				   specified with -imultilib
-				   appended.  */
+  const char multilib;		/* FNAME should have appended
+				   - the multilib path specified with -imultilib
+				     when set to 1,
+				   - the multiarch path specified with
+				     -imultiarch, when set to 2.  */
 };
 
 extern const struct default_include cpp_include_defaults[];
Index: gcc/config/i386/t-kfreebsd
===================================================================
--- gcc/config/i386/t-kfreebsd	(Revision 0)
+++ gcc/config/i386/t-kfreebsd	(Arbeitskopie)
@@ -0,0 +1,5 @@ 
+MULTIARCH_DIRNAME = $(call if_multiarch,i386-kfreebsd-gnu)
+
+# MULTILIB_OSDIRNAMES are set in t-linux64.
+KFREEBSD_OS = $(filter kfreebsd%, $(word 3, $(subst -, ,$(target))))
+MULTILIB_OSDIRNAMES := $(filter-out mx32=%,$(subst linux,$(KFREEBSD_OS),$(MULTILIB_OSDIRNAMES)))
Index: gcc/config/i386/t-linux64
===================================================================
--- gcc/config/i386/t-linux64	(Revision 195102)
+++ gcc/config/i386/t-linux64	(Arbeitskopie)
@@ -34,6 +34,6 @@ 
 comma=,
 MULTILIB_OPTIONS    = $(subst $(comma),/,$(TM_MULTILIB_CONFIG))
 MULTILIB_DIRNAMES   = $(patsubst m%, %, $(subst /, ,$(MULTILIB_OPTIONS)))
-MULTILIB_OSDIRNAMES = m64=../lib64
-MULTILIB_OSDIRNAMES+= m32=$(if $(wildcard $(shell echo $(SYSTEM_HEADER_DIR))/../../usr/lib32),../lib32,../lib)
-MULTILIB_OSDIRNAMES+= mx32=../libx32
+MULTILIB_OSDIRNAMES = m64=../lib64$(call if_multiarch,:x86_64-linux-gnu)
+MULTILIB_OSDIRNAMES+= m32=$(if $(wildcard $(shell echo $(SYSTEM_HEADER_DIR))/../../usr/lib32),../lib32,../lib)$(call if_multiarch,:i386-linux-gnu)
+MULTILIB_OSDIRNAMES+= mx32=../libx32$(call if_multiarch,:x86_64-linux-gnux32)
Index: gcc/config/i386/t-gnu
===================================================================
--- gcc/config/i386/t-gnu	(Revision 0)
+++ gcc/config/i386/t-gnu	(Arbeitskopie)
@@ -0,0 +1 @@ 
+MULTIARCH_DIRNAME = $(call if_multiarch,i386-gnu)
Index: gcc/config/i386/t-linux
===================================================================
--- gcc/config/i386/t-linux	(Revision 0)
+++ gcc/config/i386/t-linux	(Arbeitskopie)
@@ -0,0 +1 @@ 
+MULTIARCH_DIRNAME = $(call if_multiarch,i386-linux-gnu)
Index: gcc/config/arm/t-linux-eabi
===================================================================
--- gcc/config/arm/t-linux-eabi	(Revision 195102)
+++ gcc/config/arm/t-linux-eabi	(Arbeitskopie)
@@ -1,4 +1,4 @@ 
-# Copyright (C) 2005, 2009, 2010, 2011 Free Software Foundation, Inc.
+# Copyright (C) 2005-2012 Free Software Foundation, Inc.
 #
 # This file is part of GCC.
 #
@@ -24,3 +24,8 @@ 
 #MULTILIB_OPTIONS     += mcpu=fa606te/mcpu=fa626te/mcpu=fmp626/mcpu=fa726te
 #MULTILIB_DIRNAMES    += fa606te fa626te fmp626 fa726te
 #MULTILIB_EXCEPTIONS  += *mthumb/*mcpu=fa606te *mthumb/*mcpu=fa626te *mthumb/*mcpu=fmp626 *mthumb/*mcpu=fa726te*
+
+ifneq (,$(findstring gnueabi,$(target)))
+ARM_EB = $(if $(findstring TARGET_BIG_ENDIAN_DEFAULT=1, $(tm_defines)),eb)
+MULTIARCH_DIRNAME = $(call if_multiarch,arm$(ARM_EB)-linux-gnueabi$(if $(filter hard,$(with_float)),hf))
+endif
Index: gcc/config/m68k/t-linux
===================================================================
--- gcc/config/m68k/t-linux	(Revision 195102)
+++ gcc/config/m68k/t-linux	(Arbeitskopie)
@@ -1,4 +1,4 @@ 
-# Copyright (C) 2008, 2010, 2011 Free Software Foundation, Inc.
+# Copyright (C) 2008, 2010, 2011, 2012 Free Software Foundation, Inc.
 #
 # This file is part of GCC.
 #
@@ -19,6 +19,10 @@ 
 # Only include multilibs for 680x0 and ColdFire CPUs with an MMU.
 M68K_MLIB_CPU += && ((CPU ~ "^m680") || (CPU ~ "^mcf")) && (FLAGS ~ "FL_MMU")
 
+ifeq ($(M68K_ARCH),m68k)
+MULTIARCH_DIRNAME = $(call if_multiarch,m68k-linux-gnu)
+endif
+
 # This rule uses MULTILIB_MATCHES to generate a definition of
 # SYSROOT_SUFFIX_SPEC.
 sysroot-suffix.h: $(srcdir)/config/m68k/print-sysroot-suffix.sh
Index: gcc/config/mips/t-linux64
===================================================================
--- gcc/config/mips/t-linux64	(Revision 195102)
+++ gcc/config/mips/t-linux64	(Arbeitskopie)
@@ -18,4 +18,9 @@ 
 
 MULTILIB_OPTIONS = mabi=n32/mabi=32/mabi=64
 MULTILIB_DIRNAMES = n32 32 64
-MULTILIB_OSDIRNAMES = ../lib32 ../lib ../lib64
+MIPS_EL = $(if $(filter %el, $(firstword $(subst -, ,$(target)))),el)
+MIPS_SOFT = $(if $(strip $(filter MASK_SOFT_FLOAT_ABI, $(target_cpu_default)) $(filter soft, $(with_float))),soft)
+MULTILIB_OSDIRNAMES = \
+	../lib32$(call if_multiarch,:mips64$(MIPS_EL)-linux-gnuabin32$(MIPS_SOFT)) \
+	../lib$(call if_multiarch,:mips$(MIPS_EL)-linux-gnu$(MIPS_SOFT)) \
+	../lib64$(call if_multiarch,:mips64$(MIPS_EL)-linux-gnuabi64$(MIPS_SOFT))
Index: gcc/config/alpha/t-linux
===================================================================
--- gcc/config/alpha/t-linux	(Revision 0)
+++ gcc/config/alpha/t-linux	(Arbeitskopie)
@@ -0,0 +1 @@ 
+MULTIARCH_DIRNAME = $(call if_multiarch,alpha-linux-gnu)
Index: gcc/config/rs6000/t-fprules
===================================================================
--- gcc/config/rs6000/t-fprules	(Revision 195102)
+++ gcc/config/rs6000/t-fprules	(Arbeitskopie)
@@ -1,4 +1,4 @@ 
-# Copyright (C) 2002, 2005, 2006, 2008, 2011 Free Software Foundation, Inc.
+# Copyright (C) 2002, 2005, 2006, 2008, 2011, 2012 Free Software Foundation, Inc.
 #
 # This file is part of GCC.
 #
@@ -16,17 +16,8 @@ 
 # along with GCC; see the file COPYING3.  If not see
 # <http://www.gnu.org/licenses/>.
 
-MULTILIB_MATCHES_FLOAT	= msoft-float=mcpu?401 \
-			  msoft-float=mcpu?403 \
-			  msoft-float=mcpu?405 \
-			  msoft-float=mcpu?440 \
-			  msoft-float=mcpu?464 \
-			  msoft-float=mcpu?476 \
-			  msoft-float=mcpu?ec603e \
-			  msoft-float=mcpu?801 \
-			  msoft-float=mcpu?821 \
-			  msoft-float=mcpu?823 \
-			  msoft-float=mcpu?860
+SOFT_FLOAT_CPUS = e300c2 401 403 405 440 464 476 ec603e 801 821 823 860
+MULTILIB_MATCHES_FLOAT = $(foreach cpu, $(SOFT_FLOAT_CPUS), msoft-float=mcpu?$(cpu))
 
 # Build the libraries for both hard and soft floating point by default
 
Index: gcc/config/rs6000/t-linux64
===================================================================
--- gcc/config/rs6000/t-linux64	(Revision 195102)
+++ gcc/config/rs6000/t-linux64	(Arbeitskopie)
@@ -31,5 +31,7 @@ 
 MULTILIB_EXTRA_OPTS     = fPIC mstrict-align
 MULTILIB_EXCEPTIONS     = m64/msoft-float
 MULTILIB_EXCLUSIONS     = m64/!m32/msoft-float
-MULTILIB_OSDIRNAMES	= ../lib64 $(if $(wildcard $(shell echo $(SYSTEM_HEADER_DIR))/../../usr/lib32),../lib32,../lib) nof
+MULTILIB_OSDIRNAMES	= ../lib64$(call if_multiarch,:powerpc64-linux-gnu)
+MULTILIB_OSDIRNAMES    += $(if $(wildcard $(shell echo $(SYSTEM_HEADER_DIR))/../../usr/lib32),../lib32,../lib)$(call if_multiarch,:powerpc-linux-gnu)
+MULTILIB_OSDIRNAMES    += nof
 MULTILIB_MATCHES        = $(MULTILIB_MATCHES_FLOAT)
Index: gcc/config/rs6000/t-linux
===================================================================
--- gcc/config/rs6000/t-linux	(Revision 0)
+++ gcc/config/rs6000/t-linux	(Arbeitskopie)
@@ -0,0 +1,9 @@ 
+# do not define the multiarch name if configured for a soft-float cpu
+# or soft-float.
+ifeq (,$(filter $(with_cpu),$(SOFT_FLOAT_CPUS))$(findstring soft,$(with_float)))
+ifneq (,$(findstring spe,$(target)))
+MULTIARCH_DIRNAME = powerpc-linux-gnuspe$(if $(findstring rs6000/e500-double.h, $(tm_file_list)),,v1)
+else
+MULTIARCH_DIRNAME = powerpc-linux-gnu
+endif
+endif
Index: gcc/config/sparc/t-linux64
===================================================================
--- gcc/config/sparc/t-linux64	(Revision 195102)
+++ gcc/config/sparc/t-linux64	(Arbeitskopie)
@@ -1,5 +1,5 @@ 
 # Copyright (C) 1998, 1999, 2000, 2001, 2002, 2004,
-# 2006, 2010, 2011 Free Software Foundation, Inc.
+# 2006, 2010, 2011, 2012 Free Software Foundation, Inc.
 #
 # This file is part of GCC.
 #
@@ -26,4 +26,5 @@ 
 
 MULTILIB_OPTIONS = m64/m32
 MULTILIB_DIRNAMES = 64 32
-MULTILIB_OSDIRNAMES = ../lib64 $(if $(wildcard $(shell echo $(SYSTEM_HEADER_DIR))/../../usr/lib32),../lib32,../lib)
+MULTILIB_OSDIRNAMES = ../lib64$(call if_multiarch,:sparc64-linux-gnu)
+MULTILIB_OSDIRNAMES += $(if $(wildcard $(shell echo $(SYSTEM_HEADER_DIR))/../../usr/lib32),../lib32,../lib)$(call if_multiarch,:sparc-linux-gnu)
Index: gcc/config/sparc/t-linux
===================================================================
--- gcc/config/sparc/t-linux	(Revision 0)
+++ gcc/config/sparc/t-linux	(Arbeitskopie)
@@ -0,0 +1 @@ 
+MULTIARCH_DIRNAME = $(call if_multiarch,sparc-linux-gnu)
Index: gcc/config/ia64/t-linux
===================================================================
--- gcc/config/ia64/t-linux	(Revision 0)
+++ gcc/config/ia64/t-linux	(Arbeitskopie)
@@ -0,0 +1 @@ 
+MULTIARCH_DIRNAME = $(call if_multiarch,ia64-linux-gnu)
Index: gcc/config/s390/t-linux64
===================================================================
--- gcc/config/s390/t-linux64	(Revision 195102)
+++ gcc/config/s390/t-linux64	(Arbeitskopie)
@@ -7,4 +7,5 @@ 
 
 MULTILIB_OPTIONS = m64/m31
 MULTILIB_DIRNAMES = 64 32
-MULTILIB_OSDIRNAMES = ../lib64 $(if $(wildcard $(shell echo $(SYSTEM_HEADER_DIR))/../../usr/lib32),../lib32,../lib)
+MULTILIB_OSDIRNAMES = ../lib64$(call if_multiarch,:s390x-linux-gnu)
+MULTILIB_OSDIRNAMES += $(if $(wildcard $(shell echo $(SYSTEM_HEADER_DIR))/../../usr/lib32),../lib32,../lib)$(call if_multiarch,:s390-linux-gnu)
Index: gcc/config/pa/t-linux
===================================================================
--- gcc/config/pa/t-linux	(Revision 0)
+++ gcc/config/pa/t-linux	(Arbeitskopie)
@@ -0,0 +1 @@ 
+MULTIARCH_DIRNAME = $(call if_multiarch,hppa-linux-gnu)
Index: gcc/genmultilib
===================================================================
--- gcc/genmultilib	(Revision 195102)
+++ gcc/genmultilib	(Arbeitskopie)
@@ -1,6 +1,6 @@ 
 #!/bin/sh 
 # Generates multilib.h.
-#   Copyright (C) 1994, 1995, 1996, 1997, 1999, 2002, 2007
+#   Copyright (C) 1994, 1995, 1996, 1997, 1999, 2002, 2007, 2012
 #   Free Software Foundation, Inc.
 
 #This file is part of GCC.
@@ -73,6 +73,8 @@ 
 # the os directory names are used exclusively.  Use the mapping when
 # there is no one-to-one equivalence between GCC levels and the OS.
 
+# The optional eighth argument is the multiarch name.
+
 # The last option should be "yes" if multilibs are enabled.  If it is not
 # "yes", all GCC multilib dir names will be ".".
 
@@ -121,7 +123,8 @@ 
 extra=$5
 exclusions=$6
 osdirnames=$7
-enable_multilib=$8
+multiarch=$8
+enable_multilib=$9
 
 echo "static const char *const multilib_raw[] = {"
 
@@ -222,6 +225,9 @@ 
 # names.
 toosdirnames=
 defaultosdirname=
+if [ -n "${multiarch}" ]; then
+  defaultosdirname=::${multiarch}
+fi
 if [ -n "${osdirnames}" ]; then
   set x ${osdirnames}
   shift
@@ -229,6 +235,9 @@ 
     case "$1" in
       .=*)
         defaultosdirname=`echo $1 | sed 's|^.=|:|'`
+	if [ -n "${multiarch}" ]; then
+	  defaultosdirname=${defaultosdirname}:${multiarch}
+	fi
 	shift
 	;;
       *=*)
@@ -314,13 +323,13 @@ 
     dirout=`echo ${combo} | sed -e 's/=/-/g'`
   fi
   # Remove the leading and trailing slashes.
-  dirout=`echo ${dirout} | sed -e 's|^/||' -e 's|/$||g'`
+  dirout=`echo ${dirout} | sed -e 's|^/||' -e 's|/*:/*|:|' -e 's|/$||g'`
 
   # Use the OS directory names rather than the option names.
   if [ -n "${toosdirnames}" ]; then
     osdirout=`echo ${combo} | sed ${toosdirnames}`
     # Remove the leading and trailing slashes.
-    osdirout=`echo ${osdirout} | sed -e 's|^/||' -e 's|/$||g'`
+    osdirout=`echo ${osdirout} | sed -e 's|^/||' -e 's|/*:/*|:|' -e 's|/$||g'`
     if [ "x${enable_multilib}" != xyes ]; then
       dirout=".:${osdirout}"
       disable_multilib=yes
Index: gcc/doc/invoke.texi
===================================================================
--- gcc/doc/invoke.texi	(Revision 195102)
+++ gcc/doc/invoke.texi	(Arbeitskopie)
@@ -6035,6 +6035,11 @@ 
 @file{../lib32}, or if OS libraries are present in @file{lib/@var{subdir}}
 subdirectories it prints e.g.@: @file{amd64}, @file{sparcv9} or @file{ev6}.
 
+@item -print-multiarch
+@opindex print-multiarch
+Print the path to OS libraries for the selected multiarch,
+relative to some @file{lib} subdirectory.
+
 @item -print-prog-name=@var{program}
 @opindex print-prog-name
 Like @option{-print-file-name}, but searches for a program such as @samp{cpp}.
Index: gcc/doc/install.texi
===================================================================
--- gcc/doc/install.texi	(Revision 195102)
+++ gcc/doc/install.texi	(Arbeitskopie)
@@ -1032,6 +1032,15 @@ 
 @code{gnu2}, which select between the original GNU dialect and the GNU TLS
 descriptor-based dialect.
 
+@item --enable-multiarch
+Specify whether to enable or disable multiarch support.  The default is
+to check for glibc start files in a multiarch location, and enable it
+if the files are found.  The auto detection is enabled for native builds,
+and for cross builds configured with @option{--with-sysroot}, and without
+@option{--with-native-system-header-dir}.
+More documentation about multiarch can be found at
+@uref{http://wiki.debian.org/Multiarch}.
+
 @item --disable-multilib
 Specify that multiple target
 libraries to support different target variants, calling
Index: gcc/doc/fragments.texi
===================================================================
--- gcc/doc/fragments.texi	(Revision 195102)
+++ gcc/doc/fragments.texi	(Arbeitskopie)
@@ -1,5 +1,5 @@ 
 @c Copyright (C) 1988, 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
-@c 1999, 2000, 2001, 2003, 2004, 2005, 2008, 2011
+@c 1999, 2000, 2001, 2003, 2004, 2005, 2008, 2011, 2012
 @c Free Software Foundation, Inc.
 @c This is part of the GCC manual.
 @c For copying conditions, see the file gcc.texi.
@@ -93,6 +93,12 @@ 
 default value will be @code{MULTILIB_OPTIONS}, with all slashes treated
 as spaces.
 
+@code{MULTILIB_DIRNAMES} describes the multilib directories using GCC
+conventions and is applied to directories that are part of the GCC
+installation.  When multilib-enabled, the compiler will add a
+subdirectory of the form @var{prefix}/@var{multilib} before each
+directory in the search path for libraries and crt files.
+
 For example, if @code{MULTILIB_OPTIONS} is set to @samp{m68000/m68020
 msoft-float}, then the default value of @code{MULTILIB_DIRNAMES} is
 @samp{m68000 m68020 msoft-float}.  You may specify a different value if
@@ -129,6 +135,60 @@ 
 of options to be used for all builds.  If you set this, you should
 probably set @code{CRTSTUFF_T_CFLAGS} to a dash followed by it.
 
+@findex MULTILIB_OSDIRNAMES
+@item MULTILIB_OSDIRNAMES
+If @code{MULTILIB_OPTIONS} is used, this variable specifies 
+a list of subdirectory names, that are used to modify the search
+path depending on the chosen multilib.  Unlike @code{MULTILIB_DIRNAMES},
+@code{MULTILIB_OSDIRNAMES} describes the multilib directories using
+operating systems conventions, and is applied to the directories such as
+@code{lib} or those in the @env{LIBRARY_PATH} environment variable.
+The format is either the same as of
+@code{MULTILIB_DIRNAMES}, or a set of mappings.  When it is the same
+as @code{MULTILIB_DIRNAMES}, it describes the multilib directories
+using operating system conventions, rather than GCC conventions.  When it is a set
+of mappings of the form @var{gccdir}=@var{osdir}, the left side gives
+the GCC convention and the right gives the equivalent OS defined
+location.  If the @var{osdir} part begins with a @samp{!},
+GCC will not search in the non-multilib directory and use
+exclusively the multilib directory.  Otherwise, the compiler will
+examine the search path for libraries and crt files twice; the first
+time it will add @var{multilib} to each directory in the search path,
+the second it will not.
+
+For configurations that support both multilib and multiarch,
+@code{MULTILIB_OSDIRNAMES} also encodes the multiarch name, thus
+subsuming @code{MULTIARCH_DIRNAME}.  The multiarch name is appended to
+each directory name, separated by a colon (e.g.
+@samp{../lib32:i386-linux-gnu}).
+
+Each multiarch subdirectory will be searched before the corresponding OS
+multilib directory, for example @samp{/lib/i386-linux-gnu} before
+@samp{/lib/../lib32}.  The multiarch name will also be used to modify the
+system header search path, as explained for @code{MULTIARCH_DIRNAME}.
+
+@findex MULTIARCH_DIRNAME
+@item MULTIARCH_DIRNAME
+This variable specifies the multiarch name for configurations that are
+multiarch-enabled but not multilibbed configurations.
+
+The multiarch name is used to augment the search path for libraries, crt
+files and system header files with additional locations.  The compiler
+will add a multiarch subdirectory of the form
+@var{prefix}/@var{multiarch} before each directory in the library and
+crt search path.  It will also add two directories
+@code{LOCAL_INCLUDE_DIR}/@var{multiarch} and
+@code{NATIVE_SYSTEM_HEADER_DIR}/@var{multiarch}) to the system header
+search path, respectively before @code{LOCAL_INCLUDE_DIR} and
+@code{NATIVE_SYSTEM_HEADER_DIR}.
+
+@code{MULTIARCH_DIRNAME} is not used for configurations that support
+both multilib and multiarch.  In that case, multiarch names are encoded
+in @code{MULTILIB_OSDIRNAMES} instead.
+
+More documentation about multiarch can be found at
+@uref{http://wiki.debian.org/Multiarch}.
+
 @findex SPECS
 @item SPECS
 Unfortunately, setting @code{MULTILIB_EXTRA_OPTS} is not enough, since
Index: gcc/common.opt
===================================================================
--- gcc/common.opt	(Revision 195102)
+++ gcc/common.opt	(Arbeitskopie)
@@ -345,6 +345,9 @@ 
 -print-multi-os-directory
 Driver Alias(print-multi-os-directory)
 
+-print-multiarch
+Driver Alias(print-multiarch)
+
 -print-prog-name
 Driver Separate Alias(print-prog-name=)
 
@@ -2260,6 +2263,10 @@ 
 Common Joined Var(plugindir_string) Init(0)
 -iplugindir=<dir>	Set <dir> to be the default plugin directory
 
+imultiarch
+Common Joined Separate RejectDriver Var(imultiarch) Init(0)
+-imultiarch <dir>	Set <dir> to be the multiarch include subdirectory
+
 l
 Driver Joined Separate
 
@@ -2317,6 +2324,9 @@ 
 
 print-multi-os-directory
 Driver Var(print_multi_os_directory)
+ 
+print-multiarch
+Driver Var(print_multiarch)
 
 print-prog-name=
 Driver JoinedOrMissing Var(print_prog_name)
Index: gcc/config.gcc
===================================================================
--- gcc/config.gcc	(Revision 195102)
+++ gcc/config.gcc	(Arbeitskopie)
@@ -777,6 +777,7 @@ 
 case ${target} in
 alpha*-*-linux*)
 	tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h glibc-stdint.h"
+	tmake_file="${tmake_file} alpha/t-linux"
 	extra_options="${extra_options} alpha/elf.opt"
 	target_cpu_default="MASK_GAS"
 	;;
@@ -1063,6 +1064,7 @@ 
 	tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h gnu-user.h linux.h \
 		 glibc-stdint.h pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h \
 		 pa/pa64-linux.h"
+	tmake_file="${tmake_file} pa/t-linux"
 	gas=yes gnu_ld=yes
 	need_64bit_hwint=yes
 	;;
@@ -1070,6 +1072,7 @@ 
 	target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS"
 	tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h pa/pa-linux.h \
 		 pa/pa32-regs.h pa/pa32-linux.h"
+	tmake_file="${tmake_file} pa/t-linux"
 	;;
 # port not yet contributed.
 #hppa*-*-openbsd*)
@@ -1548,7 +1551,7 @@ 
 	;;
 ia64*-*-linux*)
 	tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ia64/sysv4.h ia64/linux.h"
-	tmake_file="${tmake_file} ia64/t-ia64 t-libunwind"
+	tmake_file="${tmake_file} ia64/t-ia64 ia64/t-linux t-libunwind"
 	target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
 	;;
 ia64*-*-hpux*)
@@ -2075,6 +2078,7 @@ 
 		;;
 	    *)
 		tm_file="${tm_file} rs6000/linux.h glibc-stdint.h"
+		tmake_file="$tmake_file rs6000/t-linux"
 		;;
 	esac
 	case ${target} in
@@ -2438,6 +2442,7 @@ 
 		tmake_file="${tmake_file} sparc/t-linux64"
 	else
 		tm_file="${tm_file} sparc/linux.h"
+		tmake_file="${tmake_file} sparc/t-linux"
 	fi
 	;;
 sparc-*-netbsdelf*)
@@ -3559,10 +3564,15 @@ 
 
 	i[34567]86-*-darwin* | x86_64-*-darwin*)
 		;;
-	i[34567]86-*-linux* | x86_64-*-linux* | \
-	  i[34567]86-*-kfreebsd*-gnu | x86_64-*-kfreebsd*-gnu | \
-	  i[34567]86-*-gnu*)
+	i[34567]86-*-linux* | x86_64-*-linux*)
+		tmake_file="$tmake_file i386/t-linux"
 		;;
+	i[34567]86-*-kfreebsd*-gnu | x86_64-*-kfreebsd*-gnu)
+		tmake_file="$tmake_file i386/t-kfreebsd"
+		;;
+	i[34567]86-*-gnu*)
+		tmake_file="$tmake_file i386/t-gnu"
+		;;
 	i[34567]86-*-solaris2* | x86_64-*-solaris2.1[0-9]*)
 		;;
 	i[34567]86-*-cygwin* | i[34567]86-*-mingw* | x86_64-*-mingw*)
Index: gcc/configure.ac
===================================================================
--- gcc/configure.ac	(Revision 195102)
+++ gcc/configure.ac	(Arbeitskopie)
@@ -623,6 +623,32 @@ 
 [], [enable_multilib=yes])
 AC_SUBST(enable_multilib)
 
+# Determine whether or not multiarch is enabled.
+AC_ARG_ENABLE(multiarch,
+[AS_HELP_STRING([--enable-multiarch],
+		[enable support for multiarch paths])],
+[case "${enableval}" in
+yes|no|auto) enable_multiarch=$enableval;;
+*) AC_MSG_ERROR(bad value ${enableval} given for --enable-multiarch option) ;;
+esac], [enable_multiarch=auto])
+if test x${enable_multiarch} = xauto; then
+  if test x${with_native_system_header_dir} != x; then
+    ma_msg_suffix=", disabled auto check (configured with --native-system-header-dir)"
+    enable_multiarch=no
+  fi
+  if test x$host != x$target && test "x$with_sysroot" = x; then
+    ma_msg_suffix=", disabled auto check (cross build configured without --with-sysroot)"
+    enable_multiarch=no
+  fi
+fi
+AC_MSG_CHECKING(for multiarch configuration)
+AC_SUBST(enable_multiarch)
+AC_MSG_RESULT($enable_multiarch$ma_msg_suffix)
+
+# needed for setting the multiarch name for soft-float/hard-float ABIs
+AC_SUBST(with_cpu)
+AC_SUBST(with_float)
+
 # Enable __cxa_atexit for C++.
 AC_ARG_ENABLE(__cxa_atexit,
 [AS_HELP_STRING([--enable-__cxa_atexit], [enable __cxa_atexit for C++])],