| Message ID | 1358147853-31826-1-git-send-email-b32955@freescale.com |
|---|---|
| State | New, archived |
| Headers | show |
Huang Shijie a écrit : > With some latest Micron's onfi nand(such as MT29F64G08CBABAWP), > I find that if we do not apply the tPROG delay as the datasheet tells us, > the page program may fails. You will read out the all 0xff from this page > in this case. > > This patch adds the tPROG delay for page program when it is an onfi nand. > > Signed-off-by: Huang Shijie <b32955@freescale.com> > --- > drivers/mtd/nand/nand_base.c | 4 ++++ > 1 files changed, 4 insertions(+), 0 deletions(-) > > diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c > index 8323ac9..b628dd5 100644 > --- a/drivers/mtd/nand/nand_base.c > +++ b/drivers/mtd/nand/nand_base.c > @@ -841,6 +841,10 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip) > */ > ndelay(100); > > + /* Apply the tPROG delay for ONFI nand program. */ > + if (chip->onfi_version && state == FL_WRITING) > + udelay(le16_to_cpu(chip->onfi_params.t_prog)); > + > if ((state == FL_ERASING) && (chip->options & NAND_IS_AND)) > chip->cmdfunc(mtd, NAND_CMD_STATUS_MULTI, -1, -1); > else It looks wrong : why should be wait tPROG before using status command to monitor program end ? tPROG is the Page program time (Measured from the falling edge of SR[6] to the rising edge of SR[6]), but because we monitor SR[6] with status command, we already wait for that time. Are you sure that it is not a bug in your nand driver with status command ? Matthieu
于 2013年01月14日 20:28, Matthieu CASTET 写道: > Huang Shijie a écrit : >> With some latest Micron's onfi nand(such as MT29F64G08CBABAWP), >> I find that if we do not apply the tPROG delay as the datasheet tells us, >> the page program may fails. You will read out the all 0xff from this page >> in this case. >> >> This patch adds the tPROG delay for page program when it is an onfi nand. >> >> Signed-off-by: Huang Shijie<b32955@freescale.com> >> --- >> drivers/mtd/nand/nand_base.c | 4 ++++ >> 1 files changed, 4 insertions(+), 0 deletions(-) >> >> diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c >> index 8323ac9..b628dd5 100644 >> --- a/drivers/mtd/nand/nand_base.c >> +++ b/drivers/mtd/nand/nand_base.c >> @@ -841,6 +841,10 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip) >> */ >> ndelay(100); >> >> + /* Apply the tPROG delay for ONFI nand program. */ >> + if (chip->onfi_version&& state == FL_WRITING) >> + udelay(le16_to_cpu(chip->onfi_params.t_prog)); >> + >> if ((state == FL_ERASING)&& (chip->options& NAND_IS_AND)) >> chip->cmdfunc(mtd, NAND_CMD_STATUS_MULTI, -1, -1); >> else > It looks wrong : why should be wait tPROG before using status command to monitor > program end ? > > tPROG is the Page program time (Measured from the falling edge of SR[6] to the > rising edge of SR[6]), but because we monitor SR[6] with status command, we > already wait for that time. > thanks. you are right. Please ignore this patch. > Are you sure that it is not a bug in your nand driver with status command ? > > I will try to find the bug in the driver. thanks Huang Shijie > Matthieu >
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 8323ac9..b628dd5 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -841,6 +841,10 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip) */ ndelay(100); + /* Apply the tPROG delay for ONFI nand program. */ + if (chip->onfi_version && state == FL_WRITING) + udelay(le16_to_cpu(chip->onfi_params.t_prog)); + if ((state == FL_ERASING) && (chip->options & NAND_IS_AND)) chip->cmdfunc(mtd, NAND_CMD_STATUS_MULTI, -1, -1); else
With some latest Micron's onfi nand(such as MT29F64G08CBABAWP), I find that if we do not apply the tPROG delay as the datasheet tells us, the page program may fails. You will read out the all 0xff from this page in this case. This patch adds the tPROG delay for page program when it is an onfi nand. Signed-off-by: Huang Shijie <b32955@freescale.com> --- drivers/mtd/nand/nand_base.c | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-)