diff mbox

[17/18] Power: ab8500_fg: Overflow in current calculation

Message ID 1357909986-9262-18-git-send-email-lee.jones@linaro.org
State New
Headers show

Commit Message

Lee Jones Jan. 11, 2013, 1:13 p.m. UTC 
From: Paer-Olof Haakansson <par-olof.hakansson@stericsson.com>

When calculating the average current the nominator will
overflow when the charging current is high.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Henrik Sölver <henrik.solver@stericsson.com>
Reviewed-by: Par-Olof HAKANSSON <par-olof.hakansson@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
Tested-by: Par-Olof HAKANSSON <par-olof.hakansson@stericsson.com>
---
 drivers/power/ab8500_fg.c |    9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)
diff mbox

Patch

diff --git a/drivers/power/ab8500_fg.c b/drivers/power/ab8500_fg.c
index 845e64f..4bc2c2d 100644
--- a/drivers/power/ab8500_fg.c
+++ b/drivers/power/ab8500_fg.c
@@ -805,12 +805,9 @@  static void ab8500_fg_acc_cur_work(struct work_struct *work)
 
 	/*
 	 * Convert to unit value in mA
-	 * Full scale input voltage is
-	 * 66.660mV => LSB = 66.660mV/(4096*res) = 1.627mA
-	 * Given a 250ms conversion cycle time the LSB corresponds
-	 * to 112.9 nAh. Convert to current by dividing by the conversion
+	 * by dividing by the conversion
 	 * time in hours (= samples / (3600 * 4)h)
-	 * 112.9nAh assumes 10mOhm, but fg_res is in 0.1mOhm
+	 * and multiply with 1000
 	 */
 	di->avg_curr = (val * QLSB_NANO_AMP_HOURS_X10 * 36) /
 		(1000 * di->bm->fg_res * (di->fg_samples / 4));
@@ -821,6 +818,8 @@  static void ab8500_fg_acc_cur_work(struct work_struct *work)
 
 	queue_work(di->fg_wq, &di->fg_work);
 
+	dev_dbg(di->dev, "fg_res: %d, fg_samples: %d, gasg: %d, accu_charge: %d \n",
+				di->bm->fg_res, di->fg_samples, val, di->accu_charge);
 	return;
 exit:
 	dev_err(di->dev,