Patchwork [U-Boot,RFC,14/22] image: Introduce fit_image_load() to load images from FITs

login
register
mail settings
Submitter Simon Glass
Date Jan. 10, 2013, 2:58 p.m.
Message ID <1357829905-6579-15-git-send-email-sjg@chromium.org>
Download mbox | patch
Permalink /patch/211050/
State RFC
Headers show

Comments

Simon Glass - Jan. 10, 2013, 2:58 p.m.
At present code to load an image from a FIT is duplicated in the three
places where it is needed (kernel, fdt, ramdisk).

The differences between these different code copies is fairly minor.
Create a new function in the fit code which can handle any of the
requirements of those cases.

Signed-off-by: Simon Glass <sjg@chromium.org>
---
 common/image-fit.c |  221 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 include/image.h    |   77 ++++++++++++++++++-
 2 files changed, 296 insertions(+), 2 deletions(-)

Patch

diff --git a/common/image-fit.c b/common/image-fit.c
index 9f17924..ef736f3 100644
--- a/common/image-fit.c
+++ b/common/image-fit.c
@@ -32,6 +32,7 @@ 
 #else
 #include <common.h>
 #include <errno.h>
+#include <asm/io.h>
 DECLARE_GLOBAL_DATA_PTR;
 #endif /* !USE_HOSTCC*/
 
@@ -1491,6 +1492,22 @@  void fit_conf_print(const void *fit, int noffset, const char *p)
 		printf("%s  FDT:          %s\n", p, uname);
 }
 
+int fit_image_select(const void *fit, int rd_noffset, int verify)
+{
+	fit_image_print(fit, rd_noffset, "   ");
+
+	if (verify) {
+		puts("   Verifying Hash Integrity ... ");
+		if (!fit_image_verify(fit, rd_noffset)) {
+			puts("Bad Data Hash\n");
+			return -EACCES;
+		}
+		puts("OK\n");
+	}
+
+	return 0;
+}
+
 /**
  * fit_check_ramdisk - verify FIT format ramdisk subimage
  * @fit_hdr: pointer to the FIT ramdisk header
@@ -1533,3 +1550,207 @@  int fit_check_ramdisk(const void *fit, int rd_noffset, uint8_t arch,
 	bootstage_mark(BOOTSTAGE_ID_FIT_RD_CHECK_ALL_OK);
 	return 1;
 }
+
+int fit_get_node_from_config(bootm_headers_t *images, const char *prop_name,
+			ulong addr)
+{
+	int cfg_noffset;
+	void *fit_hdr;
+	int noffset;
+
+	debug("*  %s: using config '%s' from image at 0x%08lx\n",
+	      prop_name, images->fit_uname_cfg, addr);
+
+	/* Check whether configuration has this property defined */
+	fit_hdr = map_sysmem(addr, 0);
+	cfg_noffset = fit_conf_get_node(fit_hdr, images->fit_uname_cfg);
+	if (cfg_noffset < 0) {
+		debug("*  %s: no such config\n", prop_name);
+		return -ENOENT;
+	}
+
+	noffset = fit_conf_get_prop_node(fit_hdr, cfg_noffset, prop_name);
+	if (noffset < 0) {
+		debug("*  %s: no %s in config\n", prop_name, prop_name);
+		return -ENOLINK;
+	}
+
+	return noffset;
+}
+
+int fit_image_load(bootm_headers_t *images, const char *prop_name, ulong addr,
+		   const char **fit_unamep, const char *fit_uname_config,
+		   int arch, int image_type, int bootstage_id,
+		   enum fit_load_op load_op, ulong *datap, ulong *lenp)
+{
+	int cfg_noffset, noffset;
+	const char *fit_uname;
+	const void *fit;
+	const void *buf;
+	size_t size;
+	int type_ok, os_ok;
+	ulong load, data, len;
+	int ret;
+
+	fit = map_sysmem(addr, 0);
+	fit_uname = fit_unamep ? *fit_unamep : NULL;
+	printf("## Loading %s from FIT Image at %08lx ...\n", prop_name, addr);
+
+	bootstage_mark(bootstage_id + BOOTSTAGE_SUB_FORMAT);
+	if (!fit_check_format(fit)) {
+		printf("Bad FIT %s image format!\n", prop_name);
+		bootstage_error(bootstage_id + BOOTSTAGE_SUB_FORMAT);
+		return -ENOEXEC;
+	}
+	bootstage_mark(bootstage_id + BOOTSTAGE_SUB_FORMAT_OK);
+	if (fit_uname) {
+		/* get ramdisk component image node offset */
+		bootstage_mark(bootstage_id + BOOTSTAGE_SUB_UNIT_NAME);
+		noffset = fit_image_get_node(fit, fit_uname);
+	} else {
+		/*
+		 * no image node unit name, try to get config
+		 * node first. If config unit node name is NULL
+		 * fit_conf_get_node() will try to find default config node
+		 */
+		bootstage_mark(bootstage_id + BOOTSTAGE_SUB_NO_UNIT_NAME);
+		if (IMAGE_ENABLE_BEST_MATCH && !fit_uname_config) {
+			cfg_noffset = fit_conf_find_compat(fit, gd_fdt_blob());
+		} else {
+			cfg_noffset = fit_conf_get_node(fit,
+							fit_uname_config);
+		}
+		if (cfg_noffset < 0) {
+			puts("Could not find configuration node\n");
+			bootstage_error(bootstage_id +
+					BOOTSTAGE_SUB_NO_UNIT_NAME);
+			return -ENOENT;
+		}
+		fit_uname_config = fdt_get_name(fit, cfg_noffset, NULL);
+		printf("   Using '%s' configuration\n", fit_uname_config);
+		if (image_type == IH_TYPE_KERNEL) {
+			/* Remember (and possibly verify) this config */
+			images->fit_uname_cfg = fit_uname_config;
+			if (IMAGE_ENABLE_VERIFY && images->verify) {
+				puts("   Verifying Hash Integrity ... ");
+				if (!fit_config_verify(fit, cfg_noffset)) {
+					puts("Bad Data Hash\n");
+					bootstage_error(bootstage_id +
+						BOOTSTAGE_SUB_HASH);
+					return -EACCES;
+				}
+				puts("OK\n");
+			}
+			bootstage_mark(BOOTSTAGE_ID_FIT_CONFIG);
+		}
+
+		noffset = fit_conf_get_prop_node(fit, cfg_noffset,
+						 prop_name);
+		fit_uname = fit_get_name(fit, noffset, NULL);
+	}
+	if (noffset < 0) {
+		puts("Could not find subimage node\n");
+		bootstage_error(bootstage_id + BOOTSTAGE_SUB_SUBNODE);
+		return -ENOENT;
+	}
+
+	printf("   Trying '%s' %s subimage\n", fit_uname, prop_name);
+
+	ret = fit_image_select(fit, noffset, images->verify);
+	if (ret) {
+		bootstage_error(bootstage_id + BOOTSTAGE_SUB_HASH);
+		return ret;
+	}
+
+	bootstage_mark(bootstage_id + BOOTSTAGE_SUB_CHECK_ARCH);
+	if (!fit_image_check_target_arch(fit, noffset)) {
+		puts("Unsupported Architecture\n");
+		bootstage_error(bootstage_id + BOOTSTAGE_SUB_CHECK_ARCH);
+		return -ENOEXEC;
+	}
+
+	if (image_type == IH_TYPE_FLATDT &&
+			!fit_image_check_comp(fit, noffset, IH_COMP_NONE)) {
+		puts("FDT image is compressed");
+		return -EPROTONOSUPPORT;
+	}
+
+	bootstage_mark(bootstage_id + BOOTSTAGE_SUB_CHECK_ALL);
+	type_ok = fit_image_check_type(fit, noffset, image_type) ||
+		(image_type == IH_TYPE_KERNEL &&
+			fit_image_check_type(fit, noffset,
+					     IH_TYPE_KERNEL_NOLOAD));
+	os_ok = image_type == IH_TYPE_FLATDT ||
+		fit_image_check_os(fit, noffset, IH_OS_LINUX);
+	if (!type_ok || !os_ok) {
+		printf("No Linux %s %s Image\n", genimg_get_arch_name(arch),
+			genimg_get_type_name(image_type));
+		bootstage_error(bootstage_id + BOOTSTAGE_SUB_CHECK_ALL);
+		return -EIO;
+	}
+
+	bootstage_mark(bootstage_id + BOOTSTAGE_SUB_CHECK_ALL_OK);
+
+	/* get image data address and length */
+	if (fit_image_get_data(fit, noffset, &buf, &size)) {
+		printf("Could not find %s subimage data!\n", prop_name);
+		bootstage_error(bootstage_id + BOOTSTAGE_SUB_GET_DATA);
+		return -ENOMEDIUM;
+	}
+	len = (ulong)size;
+
+	/* verify that image data is a proper FDT blob */
+	if (image_type == IH_TYPE_FLATDT &&
+			fdt_check_header((char *)buf)) {
+		puts("Subimage data is not a FDT");
+		return -ENOEXEC;
+	}
+
+	bootstage_mark(bootstage_id + BOOTSTAGE_SUB_GET_DATA_OK);
+
+	data = map_to_sysmem((char *)buf);
+
+	if (load_op == FIT_LOAD_IGNORED) {
+		/* Don't load */
+	} else if (fit_image_get_load(fit, noffset, &load)) {
+		if (load_op == FIT_LOAD_REQUIRED) {
+			printf("Can't get %s subimage load address!\n",
+			       prop_name);
+			bootstage_error(bootstage_id + BOOTSTAGE_SUB_LOAD);
+			return -EBADF;
+		}
+	} else {
+		ulong image_start, image_end;
+		ulong load_end;
+		void *dst;
+
+		/*
+		 * move image data to the load address,
+		 * make sure we don't overwrite initial image
+		 */
+		image_start = addr;
+		image_end = addr + fit_get_size(fit);
+
+		load_end = load + len;
+		if (image_type != IH_TYPE_KERNEL &&
+				load < image_end && load_end > image_start) {
+			printf("Error: %s overwritten\n", prop_name);
+			return -EXDEV;
+		}
+
+		printf("   Loading %s from 0x%08lx to 0x%08lx\n",
+			prop_name, data, load);
+
+		dst = map_sysmem(load, len);
+		memmove(dst, buf, len);
+		data = load;
+	}
+	bootstage_mark(bootstage_id + BOOTSTAGE_SUB_LOAD);
+
+	*datap = data;
+	*lenp = len;
+	if (fit_unamep)
+		*fit_unamep = (char *)fit_uname;
+
+	return noffset;
+}
diff --git a/include/image.h b/include/image.h
index 6e7baf9..2546cd9 100644
--- a/include/image.h
+++ b/include/image.h
@@ -371,6 +371,13 @@  void genimg_print_size(uint32_t size);
 #endif
 void genimg_print_time(time_t timestamp);
 
+/* What to do with a image load address ('load = <> 'in the FIT) */
+enum fit_load_op {
+	FIT_LOAD_IGNORED,	/* Ignore load address */
+	FIT_LOAD_OPTIONAL,	/* Can be provided, but optional */
+	FIT_LOAD_REQUIRED,	/* Must be provided */
+};
+
 #ifndef USE_HOSTCC
 /* Image format types, returned by _get_format() routine */
 #define IMAGE_FORMAT_INVALID	0x00
@@ -384,6 +391,68 @@  ulong genimg_get_image(ulong img_addr);
 int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images,
 		uint8_t arch, ulong *rd_start, ulong *rd_end);
 
+/**
+ * fit_image_load() - load an image from a FIT
+ *
+ * This deals with all aspects of loading an image from a FIT, including
+ * selecting the right image based on configuration, verifying it, printing
+ * out progress messages, checking the type/arch/os and optionally copying it
+ * to the right load address.
+ *
+ * @param images	Boot images structure
+ * @param prop_name	Property name to look up (FIT_..._PROP)
+ * @param addr		Address of FIT in memory
+ * @param fit_unamep	On entry this is the requested image name
+ *			(e.g. "kernel@1") or NULL to use the default. On exit
+ *			points to the selected image name
+ * @param fit_uname_config	Requested configuration name, or NULL for the
+ *			default
+ * @param arch		Expected architecture (IH_ARCH_...)
+ * @param image_type	Required image type (IH_TYPE_...). If this is
+ *			IH_TYPE_KERNEL then we allow IH_TYPE_KERNEL_NOLOAD
+ *			also.
+ * @param bootstage_id	ID of starting bootstage to use for progress updates.
+ *			This will be added to the BOOTSTAGE_SUB values when
+ *			calling bootstage_mark()
+ * @param load_op	Decribes what to do with the load address
+ * @param datap		Returns address of loaded image
+ * @param lenp		Returns length of loaded image
+ */
+int fit_image_load(bootm_headers_t *images, const char *prop_name, ulong addr,
+		   const char **fit_unamep, const char *fit_uname_config,
+		   int arch, int image_type, int bootstage_id,
+		   enum fit_load_op load_op, ulong *datap, ulong *lenp);
+
+/**
+ * fit_get_node_from_config() - Look up an image a FIT by type
+ *
+ * This looks in the selected conf@ node (images->fit_uname_cfg) for a
+ * particular image type (e.g. "kernel") and then finds the image that is
+ * referred to.
+ *
+ * For example, for something like:
+ *
+ * images {
+ *	kernel@1 {
+ *		...
+ *	};
+ * };
+ * configurations {
+ *	conf@1 {
+ *		kernel = "kernel@1";
+ *	};
+ * };
+ *
+ * the function will return the node offset of the kernel@1 node, assuming
+ * that conf@1 is the chosen configuration.
+ *
+ * @param images	Boot images structure
+ * @param prop_name	Property name to look up (FIT_..._PROP)
+ * @param addr		Address of FIT in memory
+ */
+int fit_get_node_from_config(bootm_headers_t *images, const char *prop_name,
+			ulong addr);
+
 int boot_get_fdt(int flag, int argc, char * const argv[],
 		bootm_headers_t *images, char **of_flat_tree, ulong *of_size);
 void boot_fdt_add_mem_rsv_regions(struct lmb *lmb, void *fdt_blob);
@@ -744,6 +813,12 @@  int calculate_hash(const void *data, int data_len, const char *algo,
 # endif
 #endif
 
+#ifdef CONFIG_FIT_BEST_MATCH
+#define IMAGE_ENABLE_BEST_MATCH	1
+#else
+#define IMAGE_ENABLE_BEST_MATCH	10
+#endif
+
 /* Information passed to the signing routines */
 struct image_sign_info {
 	const char *keydir;		/* Directory conaining keys */
@@ -873,12 +948,10 @@  int fit_image_check_sig(const void *fit, int noffset, const void *data,
 struct image_region *fit_region_make_list(const void *fit,
 		struct fdt_region *fdt_regions, int count);
 
-#ifndef USE_HOSTCC
 static inline int fit_image_check_target_arch(const void *fdt, int node)
 {
 	return fit_image_check_arch(fdt, node, IH_ARCH_DEFAULT);
 }
-#endif /* USE_HOSTCC */
 
 #ifdef CONFIG_FIT_VERBOSE
 #define fit_unsupported(msg)	printf("! %s:%d " \