Patchwork [10/14] PCI: tegra: Move PCIe driver to drivers/pci/host

login
register
mail settings
Submitter Thierry Reding
Date Jan. 9, 2013, 8:43 p.m.
Message ID <1357764194-12677-11-git-send-email-thierry.reding@avionic-design.de>
Download mbox | patch
Permalink /patch/210847/
State Changes Requested, archived
Headers show

Comments

Thierry Reding - Jan. 9, 2013, 8:43 p.m.
Move the PCIe driver from arch/arm/mach-tegra into the drivers/pci/host
directory. The motivation is to collect various host controller drivers
in the same location in order to facilitate refactoring.

The Tegra PCIe driver has been largely rewritten, both in order to turn
it into a proper platform driver and to add MSI (based on code by
Krishna Kishore <kthota@nvidia.com>) as well as device tree support.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
---
 .../bindings/pci/nvidia,tegra20-pcie.txt           |  115 ++
 arch/arm/Kconfig                                   |    2 +
 arch/arm/boot/dts/tegra20.dtsi                     |   45 +
 arch/arm/mach-tegra/Kconfig                        |    5 -
 arch/arm/mach-tegra/Makefile                       |    1 -
 arch/arm/mach-tegra/board-dt-tegra20.c             |    6 +-
 arch/arm/mach-tegra/board-harmony-pcie.c           |   26 +-
 arch/arm/mach-tegra/board.h                        |    4 +-
 arch/arm/mach-tegra/iomap.h                        |    3 -
 arch/arm/mach-tegra/pcie.c                         |  865 -------------
 drivers/pci/Kconfig                                |    2 +
 drivers/pci/Makefile                               |    3 +
 drivers/pci/host/Kconfig                           |    8 +
 drivers/pci/host/Makefile                          |    1 +
 drivers/pci/host/pci-tegra.c                       | 1322 ++++++++++++++++++++
 15 files changed, 1517 insertions(+), 891 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
 delete mode 100644 arch/arm/mach-tegra/pcie.c
 create mode 100644 drivers/pci/host/Kconfig
 create mode 100644 drivers/pci/host/Makefile
 create mode 100644 drivers/pci/host/pci-tegra.c
Arnd Bergmann - Jan. 9, 2013, 9:22 p.m.
On Wednesday 09 January 2013, Thierry Reding wrote:
> Move the PCIe driver from arch/arm/mach-tegra into the drivers/pci/host
> directory. The motivation is to collect various host controller drivers
> in the same location in order to facilitate refactoring.
> 
> The Tegra PCIe driver has been largely rewritten, both in order to turn
> it into a proper platform driver and to add MSI (based on code by
> Krishna Kishore <kthota@nvidia.com>) as well as device tree support.
> 
> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>

Can you split this patch into two patches, one that moves the file,
and another one that does all the changes? It's a little hard to
review when I can't easily see which code is actually new here.

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Thierry Reding - Jan. 9, 2013, 9:58 p.m.
On Wed, Jan 09, 2013 at 09:22:07PM +0000, Arnd Bergmann wrote:
> On Wednesday 09 January 2013, Thierry Reding wrote:
> > Move the PCIe driver from arch/arm/mach-tegra into the drivers/pci/host
> > directory. The motivation is to collect various host controller drivers
> > in the same location in order to facilitate refactoring.
> > 
> > The Tegra PCIe driver has been largely rewritten, both in order to turn
> > it into a proper platform driver and to add MSI (based on code by
> > Krishna Kishore <kthota@nvidia.com>) as well as device tree support.
> > 
> > Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
> 
> Can you split this patch into two patches, one that moves the file,
> and another one that does all the changes? It's a little hard to
> review when I can't easily see which code is actually new here.

Stephen suggested I post this as removal/addition because pretty much
everything changed. Reviewing the individual changes would be more
confusing than actually reviewing a new driver.

Thierry
Arnd Bergmann - Jan. 9, 2013, 10:03 p.m.
On Wednesday 09 January 2013, Thierry Reding wrote:
> Stephen suggested I post this as removal/addition because pretty much
> everything changed. Reviewing the individual changes would be more
> confusing than actually reviewing a new driver.
> 

Ok, fair enough.

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Stephen Warren - Jan. 10, 2013, 11:54 p.m.
On 01/09/2013 01:43 PM, Thierry Reding wrote:
> Move the PCIe driver from arch/arm/mach-tegra into the drivers/pci/host
> directory. The motivation is to collect various host controller drivers
> in the same location in order to facilitate refactoring.
> 
> The Tegra PCIe driver has been largely rewritten, both in order to turn
> it into a proper platform driver and to add MSI (based on code by
> Krishna Kishore <kthota@nvidia.com>) as well as device tree support.

This driver doesn't compile unless CONFIG_PCI_MSI is also enabled.
Should it select that, or contain a few ifdefs?

drivers/pci/host/pci-tegra.c:900: undefined reference to `write_msi_msg'
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Stephen Warren - Jan. 11, 2013, 12:48 a.m.
On 01/09/2013 01:43 PM, Thierry Reding wrote:
> Move the PCIe driver from arch/arm/mach-tegra into the drivers/pci/host
> directory. The motivation is to collect various host controller drivers
> in the same location in order to facilitate refactoring.
> 
> The Tegra PCIe driver has been largely rewritten, both in order to turn
> it into a proper platform driver and to add MSI (based on code by
> Krishna Kishore <kthota@nvidia.com>) as well as device tree support.

> diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c

>  static void __init trimslice_init(void)
>  {
>  #ifdef CONFIG_TEGRA_PCI
> -	int ret;
> -
> -	ret = tegra_pcie_init(true, true);
> -	if (ret)
> -		pr_err("tegra_pci_init() failed: %d\n", ret);
> +	platform_device_register(&tegra_pcie_device);

That struct doesn't actually exist anywhere; only an extern definition
is added (and that extern definition isn't removed by patch 14 either).

> diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig

> +config PCI_TEGRA
> +	bool "NVIDIA Tegra PCIe controller"
> +	depends on ARCH_TEGRA_2x_SOC

Perhaps depend on ARCH_TEGRA; that will save churn once this is ported
to Tegra30, and shouldn't cause any problems before then.

> diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c

> +#define AFI_INTR_CODE		0xb8
> +#define  AFI_INTR_CODE_MASK	0xf
> +#define  AFI_INTR_MASTER_ABORT	4
> +#define  AFI_INTR_LEGACY	6

Adding defines for at least some other codes here, would help further
below ...

> +static irqreturn_t tegra_pcie_isr(int irq, void *arg)

> +	if (code == AFI_INTR_MASTER_ABORT) {
> +		dev_dbg(pcie->dev, "%s, signature: %08x\n", err_msg[code],
> +			signature);
> +	} else
> +		dev_err(pcie->dev, "%s, signature: %08x\n", err_msg[code],
> +			signature);
> +
> +	if (code == 3 || code == 4 || code == 7) {

... i.e. here.

> +		u32 fpci = afi_readl(pcie, AFI_UPPER_FPCI_ADDRESS) & 0xff;
> +		u64 address = (u64)fpci << 32 | (signature & 0xfffffffc);
> +		dev_dbg(pcie->dev, "  FPCI address: %10llx\n", address);

I'd suggest making that dev_err(), or at least something higher than
debug, since the message indicating the error happened is dev_err(), so
the complete details may as well be available since they're small.

> +static int tegra_pcie_enable_controller(struct tegra_pcie *pcie)
> +{
> +	unsigned int timeout;
> +	unsigned long value;
> +
> +	/* enable dual controller and both ports */
> +	value = afi_readl(pcie, AFI_PCIE_CONFIG);
> +	value &= ~(AFI_PCIE_CONFIG_PCIEC0_DISABLE_DEVICE |
> +		   AFI_PCIE_CONFIG_PCIEC1_DISABLE_DEVICE |
> +		   AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_MASK);
> +	value |= AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_DUAL;
> +	afi_writel(pcie, value, AFI_PCIE_CONFIG);

Eventually, we should probably derive the port enables from the state of
the root port DT nodes, so that we can disable some and presumably save
a little power. Also, I notice that the nvidia,num-lanes property isn't
implemented yet. Still, we can probably take care of this later.

> +static void tegra_pcie_power_off(struct tegra_pcie *pcie)

> +	if (!IS_ERR_OR_NULL(pcie->pex_clk_supply)) {

Hmm. I think we should make supplies mandatory; it doesn't make sense
for regulator support to be disabled on Tegra, and where a specific
board doesn't actually have a regulator, you're supposed to provide a
dummy fixed regulator so the driver doesn't have to care.

The same comment obviously applies to tegra_pcie_power_on() and wherever
regulator_get() happens.

> +static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)

> +	pcie->vdd_supply = devm_regulator_get(pcie->dev, "vdd");
> +	if (IS_ERR(pcie->vdd_supply))
> +		return PTR_ERR(pcie->vdd_supply);
> +
> +	pcie->pex_clk_supply = devm_regulator_get(pcie->dev, "pex-clk");
> +	if (IS_ERR(pcie->pex_clk_supply))
> +		return PTR_ERR(pcie->pex_clk_supply);

Oh, I guess the regulator_get() calls are already strict.

> +static int tegra_pcie_add_port(struct tegra_pcie *pcie, struct device_node *np)

> +	port = devm_kzalloc(pcie->dev, sizeof(*port), GFP_KERNEL);
> +	if (!port)
> +		return -ENOMEM;
> +
> +	INIT_LIST_HEAD(&port->list);
> +	port->index = index;
> +	port->pcie = pcie;
> +
> +	port->base = devm_request_and_ioremap(pcie->dev, &regs);
> +	if (!port->base)
> +		return -EADDRNOTAVAIL;
> +
> +	if (!tegra_pcie_port_check_link(port)) {
> +		dev_info(pcie->dev, "link %u down, ignoring\n", port->index);

Perhaps devm_kfree(port)? Not a big leak, but equally if you don't, it's
an unreferenced memory block.

> +		return -ENODEV;
> +	}
> +
> +	list_add_tail(&port->list, &pcie->ports);
> +
> +	return 0;
> +}
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Thierry Reding - Jan. 11, 2013, 3:40 a.m.
On Thu, Jan 10, 2013 at 04:54:30PM -0700, Stephen Warren wrote:
> On 01/09/2013 01:43 PM, Thierry Reding wrote:
> > Move the PCIe driver from arch/arm/mach-tegra into the drivers/pci/host
> > directory. The motivation is to collect various host controller drivers
> > in the same location in order to facilitate refactoring.
> > 
> > The Tegra PCIe driver has been largely rewritten, both in order to turn
> > it into a proper platform driver and to add MSI (based on code by
> > Krishna Kishore <kthota@nvidia.com>) as well as device tree support.
> 
> This driver doesn't compile unless CONFIG_PCI_MSI is also enabled.
> Should it select that, or contain a few ifdefs?
> 
> drivers/pci/host/pci-tegra.c:900: undefined reference to `write_msi_msg'

Right, it'll need #ifdefs around the arch_{setup,teardown}_msi_irq(). Or
select PCI_MSI unconditionally. Once this is merged I was going to post
a patch that enables PCI_MSI in tegra_defconfig anyway. But it might be
better to keep it optional anyway since the remainder of the code copes
with it properly.

Thierry
Thierry Reding - Jan. 11, 2013, 3:52 a.m.
On Thu, Jan 10, 2013 at 05:48:46PM -0700, Stephen Warren wrote:
> On 01/09/2013 01:43 PM, Thierry Reding wrote:
> > Move the PCIe driver from arch/arm/mach-tegra into the drivers/pci/host
> > directory. The motivation is to collect various host controller drivers
> > in the same location in order to facilitate refactoring.
> > 
> > The Tegra PCIe driver has been largely rewritten, both in order to turn
> > it into a proper platform driver and to add MSI (based on code by
> > Krishna Kishore <kthota@nvidia.com>) as well as device tree support.
> 
> > diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c
> 
> >  static void __init trimslice_init(void)
> >  {
> >  #ifdef CONFIG_TEGRA_PCI
> > -	int ret;
> > -
> > -	ret = tegra_pcie_init(true, true);
> > -	if (ret)
> > -		pr_err("tegra_pci_init() failed: %d\n", ret);
> > +	platform_device_register(&tegra_pcie_device);
> 
> That struct doesn't actually exist anywhere; only an extern definition
> is added (and that extern definition isn't removed by patch 14 either).

Right, this shouldn't be there. In fact TEGRA_PCI is removed by this
patch, so I should go over the code more carefully again.

> > diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
> 
> > +config PCI_TEGRA
> > +	bool "NVIDIA Tegra PCIe controller"
> > +	depends on ARCH_TEGRA_2x_SOC
> 
> Perhaps depend on ARCH_TEGRA; that will save churn once this is ported
> to Tegra30, and shouldn't cause any problems before then.

Okay, I can do that.

> > diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c
> 
> > +#define AFI_INTR_CODE		0xb8
> > +#define  AFI_INTR_CODE_MASK	0xf
> > +#define  AFI_INTR_MASTER_ABORT	4
> > +#define  AFI_INTR_LEGACY	6
> 
> Adding defines for at least some other codes here, would help further
> below ...
> 
> > +static irqreturn_t tegra_pcie_isr(int irq, void *arg)
> 
> > +	if (code == AFI_INTR_MASTER_ABORT) {
> > +		dev_dbg(pcie->dev, "%s, signature: %08x\n", err_msg[code],
> > +			signature);
> > +	} else
> > +		dev_err(pcie->dev, "%s, signature: %08x\n", err_msg[code],
> > +			signature);
> > +
> > +	if (code == 3 || code == 4 || code == 7) {
> 
> ... i.e. here.

Will do.

> 
> > +		u32 fpci = afi_readl(pcie, AFI_UPPER_FPCI_ADDRESS) & 0xff;
> > +		u64 address = (u64)fpci << 32 | (signature & 0xfffffffc);
> > +		dev_dbg(pcie->dev, "  FPCI address: %10llx\n", address);
> 
> I'd suggest making that dev_err(), or at least something higher than
> debug, since the message indicating the error happened is dev_err(), so
> the complete details may as well be available since they're small.

I can make it conditional on !AFI_INTR_MASTER_ABORT to match the
previous output. Or rather move it into the branches above.

> > +static int tegra_pcie_enable_controller(struct tegra_pcie *pcie)
> > +{
> > +	unsigned int timeout;
> > +	unsigned long value;
> > +
> > +	/* enable dual controller and both ports */
> > +	value = afi_readl(pcie, AFI_PCIE_CONFIG);
> > +	value &= ~(AFI_PCIE_CONFIG_PCIEC0_DISABLE_DEVICE |
> > +		   AFI_PCIE_CONFIG_PCIEC1_DISABLE_DEVICE |
> > +		   AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_MASK);
> > +	value |= AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_DUAL;
> > +	afi_writel(pcie, value, AFI_PCIE_CONFIG);
> 
> Eventually, we should probably derive the port enables from the state of
> the root port DT nodes, so that we can disable some and presumably save
> a little power. Also, I notice that the nvidia,num-lanes property isn't
> implemented yet. Still, we can probably take care of this later.

Yes, the plan was to eventually derive the disable bits from the port
status and setup the XBAR_CONFIG field based on the combination of
nvidia,num-lanes properties.

I assume we should simply fail if the configuration specified by
nvidia,num-lanes is invalid?

> > +static void tegra_pcie_power_off(struct tegra_pcie *pcie)
> 
> > +	if (!IS_ERR_OR_NULL(pcie->pex_clk_supply)) {
> 
> Hmm. I think we should make supplies mandatory; it doesn't make sense
> for regulator support to be disabled on Tegra, and where a specific
> board doesn't actually have a regulator, you're supposed to provide a
> dummy fixed regulator so the driver doesn't have to care.
> 
> The same comment obviously applies to tegra_pcie_power_on() and wherever
> regulator_get() happens.

Okay, I'll fix that.

> > +static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
> 
> > +	pcie->vdd_supply = devm_regulator_get(pcie->dev, "vdd");
> > +	if (IS_ERR(pcie->vdd_supply))
> > +		return PTR_ERR(pcie->vdd_supply);
> > +
> > +	pcie->pex_clk_supply = devm_regulator_get(pcie->dev, "pex-clk");
> > +	if (IS_ERR(pcie->pex_clk_supply))
> > +		return PTR_ERR(pcie->pex_clk_supply);
> 
> Oh, I guess the regulator_get() calls are already strict.

Yeah, I think they can't return NULL, right? In that case I can just
drop the extra checks in tegra_pcie_power_{on,off}().

> > +static int tegra_pcie_add_port(struct tegra_pcie *pcie, struct device_node *np)
> 
> > +	port = devm_kzalloc(pcie->dev, sizeof(*port), GFP_KERNEL);
> > +	if (!port)
> > +		return -ENOMEM;
> > +
> > +	INIT_LIST_HEAD(&port->list);
> > +	port->index = index;
> > +	port->pcie = pcie;
> > +
> > +	port->base = devm_request_and_ioremap(pcie->dev, &regs);
> > +	if (!port->base)
> > +		return -EADDRNOTAVAIL;
> > +
> > +	if (!tegra_pcie_port_check_link(port)) {
> > +		dev_info(pcie->dev, "link %u down, ignoring\n", port->index);
> 
> Perhaps devm_kfree(port)? Not a big leak, but equally if you don't, it's
> an unreferenced memory block.

I suppose I should do devm_iounmap() and devm_release_mem_region() as
well.

Thanks for reviewing!
Thierry
Arnd Bergmann - Jan. 11, 2013, 3:36 p.m.
On Friday 11 January 2013, Thierry Reding wrote:
> Right, it'll need #ifdefs around the arch_{setup,teardown}_msi_irq(). Or
> select PCI_MSI unconditionally. Once this is merged I was going to post
> a patch that enables PCI_MSI in tegra_defconfig anyway. But it might be
> better to keep it optional anyway since the remainder of the code copes
> with it properly.
> 
Actually, we need something better than that. You cannot define
arch_setup_msi_irq in a tegra specific pci host driver, because that
will seriously mess up other platforms in multiplatform configurations
by giving a link error when they also define this function, or with a
run-time error when they don't support it.

I think what we should do here is fix it the right way by adding
a pci host specific callback rather than an architecture specific
callback in drivers/pci/msi.c. There is already a default version
of arch_setup_msi_irqs (with s), and we can probably do the
same for arch_setup_msi_irq (without s) to fall back to the
arch version for most architectures.
Most architectures (at least powerpc, sparc, ia64 and x86) already
multiplex the msi handlers internally, but ARM does not because
there is only one implementation (iop33x) at the moment.

We can add a generix multiplex and then move architectures over to
use it.

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Thierry Reding - Jan. 11, 2013, 3:45 p.m.
On Fri, Jan 11, 2013 at 03:36:14PM +0000, Arnd Bergmann wrote:
> On Friday 11 January 2013, Thierry Reding wrote:
> > Right, it'll need #ifdefs around the arch_{setup,teardown}_msi_irq(). Or
> > select PCI_MSI unconditionally. Once this is merged I was going to post
> > a patch that enables PCI_MSI in tegra_defconfig anyway. But it might be
> > better to keep it optional anyway since the remainder of the code copes
> > with it properly.
> > 
> Actually, we need something better than that. You cannot define
> arch_setup_msi_irq in a tegra specific pci host driver, because that
> will seriously mess up other platforms in multiplatform configurations
> by giving a link error when they also define this function, or with a
> run-time error when they don't support it.
> 
> I think what we should do here is fix it the right way by adding
> a pci host specific callback rather than an architecture specific
> callback in drivers/pci/msi.c. There is already a default version
> of arch_setup_msi_irqs (with s), and we can probably do the
> same for arch_setup_msi_irq (without s) to fall back to the
> arch version for most architectures.
> Most architectures (at least powerpc, sparc, ia64 and x86) already
> multiplex the msi handlers internally, but ARM does not because
> there is only one implementation (iop33x) at the moment.
> 
> We can add a generix multiplex and then move architectures over to
> use it.

I already hinted at that in one of the other subthreads. Having such a
multiplex would also allow the driver to be built as a module. I had
already thought about this when I was working on an earlier version of
these patches. Basically these would be two ops attached to the host
bridge, and the generic arch_setup_msi_irq() could then look that up
given the struct pci_dev that is passed to it and call this new per-
host bridge .setup_msi_irq().

Thierry
Stephen Warren - Jan. 11, 2013, 8:34 p.m.
On 01/10/2013 08:52 PM, Thierry Reding wrote:
> On Thu, Jan 10, 2013 at 05:48:46PM -0700, Stephen Warren wrote:
>> On 01/09/2013 01:43 PM, Thierry Reding wrote:
>>> Move the PCIe driver from arch/arm/mach-tegra into the
>>> drivers/pci/host directory. The motivation is to collect
>>> various host controller drivers in the same location in order
>>> to facilitate refactoring.
>>> 
>>> The Tegra PCIe driver has been largely rewritten, both in order
>>> to turn it into a proper platform driver and to add MSI (based
>>> on code by Krishna Kishore <kthota@nvidia.com>) as well as
>>> device tree support.
>> 
>>> diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c
>>> b/arch/arm/mach-tegra/board-dt-tegra20.c

>>> +static int tegra_pcie_enable_controller(struct tegra_pcie
>>> *pcie) +{ +	unsigned int timeout; +	unsigned long value; + +	/*
>>> enable dual controller and both ports */ +	value =
>>> afi_readl(pcie, AFI_PCIE_CONFIG); +	value &=
>>> ~(AFI_PCIE_CONFIG_PCIEC0_DISABLE_DEVICE | +
>>> AFI_PCIE_CONFIG_PCIEC1_DISABLE_DEVICE | +
>>> AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_MASK); +	value |=
>>> AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_DUAL; +	afi_writel(pcie,
>>> value, AFI_PCIE_CONFIG);
>> 
>> Eventually, we should probably derive the port enables from the
>> state of the root port DT nodes, so that we can disable some and
>> presumably save a little power. Also, I notice that the
>> nvidia,num-lanes property isn't implemented yet. Still, we can
>> probably take care of this later.
> 
> Yes, the plan was to eventually derive the disable bits from the
> port status and setup the XBAR_CONFIG field based on the
> combination of nvidia,num-lanes properties.
> 
> I assume we should simply fail if the configuration specified by 
> nvidia,num-lanes is invalid?

Makes sense to me.

>>> +static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
>> 
>>> +	pcie->vdd_supply = devm_regulator_get(pcie->dev, "vdd"); +	if
>>> (IS_ERR(pcie->vdd_supply)) +		return
>>> PTR_ERR(pcie->vdd_supply); + +	pcie->pex_clk_supply =
>>> devm_regulator_get(pcie->dev, "pex-clk"); +	if
>>> (IS_ERR(pcie->pex_clk_supply)) +		return
>>> PTR_ERR(pcie->pex_clk_supply);
>> 
>> Oh, I guess the regulator_get() calls are already strict.
> 
> Yeah, I think they can't return NULL, right? In that case I can
> just drop the extra checks in tegra_pcie_power_{on,off}().

It looks like NULL can be returned if !CONFIG_REGULATOR. The comment
in the dummy implementation implies that drivers should treat a NULL
value as valid regulator in most cases.
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Thierry Reding - Jan. 12, 2013, 12:36 p.m.
On Fri, Jan 11, 2013 at 04:45:16PM +0100, Thierry Reding wrote:
> On Fri, Jan 11, 2013 at 03:36:14PM +0000, Arnd Bergmann wrote:
> > On Friday 11 January 2013, Thierry Reding wrote:
> > > Right, it'll need #ifdefs around the arch_{setup,teardown}_msi_irq(). Or
> > > select PCI_MSI unconditionally. Once this is merged I was going to post
> > > a patch that enables PCI_MSI in tegra_defconfig anyway. But it might be
> > > better to keep it optional anyway since the remainder of the code copes
> > > with it properly.
> > > 
> > Actually, we need something better than that. You cannot define
> > arch_setup_msi_irq in a tegra specific pci host driver, because that
> > will seriously mess up other platforms in multiplatform configurations
> > by giving a link error when they also define this function, or with a
> > run-time error when they don't support it.
> > 
> > I think what we should do here is fix it the right way by adding
> > a pci host specific callback rather than an architecture specific
> > callback in drivers/pci/msi.c. There is already a default version
> > of arch_setup_msi_irqs (with s), and we can probably do the
> > same for arch_setup_msi_irq (without s) to fall back to the
> > arch version for most architectures.
> > Most architectures (at least powerpc, sparc, ia64 and x86) already
> > multiplex the msi handlers internally, but ARM does not because
> > there is only one implementation (iop33x) at the moment.
> > 
> > We can add a generix multiplex and then move architectures over to
> > use it.
> 
> I already hinted at that in one of the other subthreads. Having such a
> multiplex would also allow the driver to be built as a module. I had
> already thought about this when I was working on an earlier version of
> these patches. Basically these would be two ops attached to the host
> bridge, and the generic arch_setup_msi_irq() could then look that up
> given the struct pci_dev that is passed to it and call this new per-
> host bridge .setup_msi_irq().

struct pci_ops looks like a good place to put these. They'll be
available from each struct pci_bus, so should be easy to call from
arch_setup_msi_irq().

Any objections?

Thierry
Arnd Bergmann - Jan. 12, 2013, 9:12 p.m.
On Saturday 12 January 2013, Thierry Reding wrote:
> > I already hinted at that in one of the other subthreads. Having such a
> > multiplex would also allow the driver to be built as a module. I had
> > already thought about this when I was working on an earlier version of
> > these patches. Basically these would be two ops attached to the host
> > bridge, and the generic arch_setup_msi_irq() could then look that up
> > given the struct pci_dev that is passed to it and call this new per-
> > host bridge .setup_msi_irq().
> 
> struct pci_ops looks like a good place to put these. They'll be
> available from each struct pci_bus, so should be easy to call from
> arch_setup_msi_irq().
> 
> Any objections?
> 

struct pci_ops has a long history of being specifically about
config space read/write operations, so on the one hand it does
not feel like the right place to put interrupt specific operations,
but on the other hand, the name sounds appropriate and I cannot
think of any other place to put this, so it's fine with me.

The only alternative I can think of is to introduce a new
structure next to it in struct pci_bus, but that feels a bit
pointless. Maybe Bjorn has a preference one way or the other.

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Thierry Reding - Jan. 13, 2013, 9:58 a.m.
On Sat, Jan 12, 2013 at 09:12:25PM +0000, Arnd Bergmann wrote:
> On Saturday 12 January 2013, Thierry Reding wrote:
> > > I already hinted at that in one of the other subthreads. Having such a
> > > multiplex would also allow the driver to be built as a module. I had
> > > already thought about this when I was working on an earlier version of
> > > these patches. Basically these would be two ops attached to the host
> > > bridge, and the generic arch_setup_msi_irq() could then look that up
> > > given the struct pci_dev that is passed to it and call this new per-
> > > host bridge .setup_msi_irq().
> > 
> > struct pci_ops looks like a good place to put these. They'll be
> > available from each struct pci_bus, so should be easy to call from
> > arch_setup_msi_irq().
> > 
> > Any objections?
> > 
> 
> struct pci_ops has a long history of being specifically about
> config space read/write operations, so on the one hand it does
> not feel like the right place to put interrupt specific operations,
> but on the other hand, the name sounds appropriate and I cannot
> think of any other place to put this, so it's fine with me.
> 
> The only alternative I can think of is to introduce a new
> structure next to it in struct pci_bus, but that feels a bit
> pointless. Maybe Bjorn has a preference one way or the other.

The name pci_ops is certainly generic enough. Also the comment above the
structure declaration says "Low-level architecture-dependent routines",
which applies to the MSI functions as well.

Thierry
Andrew Murray - Jan. 14, 2013, 9:57 a.m.
On Sun, Jan 13, 2013 at 09:58:06AM +0000, Thierry Reding wrote:
> On Sat, Jan 12, 2013 at 09:12:25PM +0000, Arnd Bergmann wrote:
> > On Saturday 12 January 2013, Thierry Reding wrote:
> > > > I already hinted at that in one of the other subthreads. Having such a
> > > > multiplex would also allow the driver to be built as a module. I had
> > > > already thought about this when I was working on an earlier version of
> > > > these patches. Basically these would be two ops attached to the host
> > > > bridge, and the generic arch_setup_msi_irq() could then look that up
> > > > given the struct pci_dev that is passed to it and call this new per-
> > > > host bridge .setup_msi_irq().
> > > 
> > > struct pci_ops looks like a good place to put these. They'll be
> > > available from each struct pci_bus, so should be easy to call from
> > > arch_setup_msi_irq().
> > > 
> > > Any objections?
> > > 
> > 
> > struct pci_ops has a long history of being specifically about
> > config space read/write operations, so on the one hand it does
> > not feel like the right place to put interrupt specific operations,
> > but on the other hand, the name sounds appropriate and I cannot
> > think of any other place to put this, so it's fine with me.
> > 
> > The only alternative I can think of is to introduce a new
> > structure next to it in struct pci_bus, but that feels a bit
> > pointless. Maybe Bjorn has a preference one way or the other.
> 
> The name pci_ops is certainly generic enough. Also the comment above the
> structure declaration says "Low-level architecture-dependent routines",
> which applies to the MSI functions as well.

I've previously looked into this. It seems that architectures handle this
in different ways, some use vector tables, others use a multiplex and others
just let the end user implement the callback directly.

I've made an attempt to find a more common way. Though my implementation, which
I will try to share later today for reference provides a registration function
in drivers/pci/msi.c to provide implementations of the
(setup|teardown)_msi_irq(s) ops. This seems slightly better than the current
approach and doesn't break existing users - but is still ugly.

At present the PCI and MSI frameworks are largely uncoupled from each other and
so I was keen to not pollute PCI structures (e.g. pci_ops) with MSI ops. Just
because most PCI host bridges also provide MSI support I don't think there is a
reason why they should always come as a pair or be provided by the same chip.

Perhaps the solution is to support MSI controller drivers and a means to
associate them with PCI host controller drivers?

Andrew Murray


--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Thierry Reding - Jan. 15, 2013, 12:08 p.m.
On Mon, Jan 14, 2013 at 09:57:07AM +0000, Andrew Murray wrote:
> On Sun, Jan 13, 2013 at 09:58:06AM +0000, Thierry Reding wrote:
> > On Sat, Jan 12, 2013 at 09:12:25PM +0000, Arnd Bergmann wrote:
> > > On Saturday 12 January 2013, Thierry Reding wrote:
> > > > > I already hinted at that in one of the other subthreads. Having such a
> > > > > multiplex would also allow the driver to be built as a module. I had
> > > > > already thought about this when I was working on an earlier version of
> > > > > these patches. Basically these would be two ops attached to the host
> > > > > bridge, and the generic arch_setup_msi_irq() could then look that up
> > > > > given the struct pci_dev that is passed to it and call this new per-
> > > > > host bridge .setup_msi_irq().
> > > > 
> > > > struct pci_ops looks like a good place to put these. They'll be
> > > > available from each struct pci_bus, so should be easy to call from
> > > > arch_setup_msi_irq().
> > > > 
> > > > Any objections?
> > > > 
> > > 
> > > struct pci_ops has a long history of being specifically about
> > > config space read/write operations, so on the one hand it does
> > > not feel like the right place to put interrupt specific operations,
> > > but on the other hand, the name sounds appropriate and I cannot
> > > think of any other place to put this, so it's fine with me.
> > > 
> > > The only alternative I can think of is to introduce a new
> > > structure next to it in struct pci_bus, but that feels a bit
> > > pointless. Maybe Bjorn has a preference one way or the other.
> > 
> > The name pci_ops is certainly generic enough. Also the comment above the
> > structure declaration says "Low-level architecture-dependent routines",
> > which applies to the MSI functions as well.
> 
> I've previously looked into this. It seems that architectures handle this
> in different ways, some use vector tables, others use a multiplex and others
> just let the end user implement the callback directly.
> 
> I've made an attempt to find a more common way. Though my implementation, which
> I will try to share later today for reference provides a registration function
> in drivers/pci/msi.c to provide implementations of the
> (setup|teardown)_msi_irq(s) ops. This seems slightly better than the current
> approach and doesn't break existing users - but is still ugly.
> 
> At present the PCI and MSI frameworks are largely uncoupled from each other and
> so I was keen to not pollute PCI structures (e.g. pci_ops) with MSI ops. Just
> because most PCI host bridges also provide MSI support I don't think there is a
> reason why they should always come as a pair or be provided by the same chip.
> 
> Perhaps the solution is to support MSI controller drivers and a means to
> associate them with PCI host controller drivers?

I'm not sure I follow you're reasoning here. Is it possible to use MSIs
without PCI? If not then I think there's little sense in keeping the
implementations separate.

Furthermore, if MSI controller and PCI host bridge are separate entities
how do you look up the MSI controller given a PCI device?

Thierry
Arnd Bergmann - Jan. 15, 2013, 12:44 p.m.
On Tuesday 15 January 2013, Thierry Reding wrote:
> I'm not sure I follow you're reasoning here. Is it possible to use MSIs
> without PCI? If not then I think there's little sense in keeping the
> implementations separate.

Conceptually, you can use MSI for any device, but the Linux interfaces
for MSI are tied to PCI. If you use an MSI controller for a non-PCI
device, it would probably just appear as a regular interrupt controller.

> Furthermore, if MSI controller and PCI host bridge are separate entities
> how do you look up the MSI controller given a PCI device?

The host bridge can contain a pointer ot the MSI controller. You can
have multiple host bridges sharing a single MSI controller or you
can have separate ones for each host.

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Andrew Murray - Jan. 15, 2013, 3:40 p.m.
On Tue, Jan 15, 2013 at 12:44:12PM +0000, Arnd Bergmann wrote:
> On Tuesday 15 January 2013, Thierry Reding wrote:
> > I'm not sure I follow you're reasoning here. Is it possible to use MSIs
> > without PCI? If not then I think there's little sense in keeping the
> > implementations separate.
> 
> Conceptually, you can use MSI for any device, but the Linux interfaces
> for MSI are tied to PCI. If you use an MSI controller for a non-PCI
> device, it would probably just appear as a regular interrupt controller.
> 
> > Furthermore, if MSI controller and PCI host bridge are separate entities
> > how do you look up the MSI controller given a PCI device?
> 
> The host bridge can contain a pointer ot the MSI controller. You can
> have multiple host bridges sharing a single MSI controller or you
> can have separate ones for each host.

Yes and I hoped this relationship would be described by a device tree phandle
as is done for relating devices to their interrupt-parent (where device trees
are used). This would provide (arguably unnecessarily) greater flexibility,
e.g. if you have two PCI/MSI controller pairs, the MSIs only offer limited MSIs
and you only use one PCI fabric - you could service different parts of the
fabric by different MSI controllers (assuming you relate MSI controllers to
part of the fabric and that you'd want to). Perhaps there would be benefits for
virtualisation as well?

Andrew Murray

--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Thierry Reding - Jan. 15, 2013, 9:14 p.m.
On Tue, Jan 15, 2013 at 03:40:38PM +0000, Andrew Murray wrote:
> On Tue, Jan 15, 2013 at 12:44:12PM +0000, Arnd Bergmann wrote:
> > On Tuesday 15 January 2013, Thierry Reding wrote:
> > > I'm not sure I follow you're reasoning here. Is it possible to use MSIs
> > > without PCI? If not then I think there's little sense in keeping the
> > > implementations separate.
> > 
> > Conceptually, you can use MSI for any device, but the Linux interfaces
> > for MSI are tied to PCI. If you use an MSI controller for a non-PCI
> > device, it would probably just appear as a regular interrupt controller.
> > 
> > > Furthermore, if MSI controller and PCI host bridge are separate entities
> > > how do you look up the MSI controller given a PCI device?
> > 
> > The host bridge can contain a pointer ot the MSI controller. You can
> > have multiple host bridges sharing a single MSI controller or you
> > can have separate ones for each host.
> 
> Yes and I hoped this relationship would be described by a device tree phandle
> as is done for relating devices to their interrupt-parent (where device trees
> are used). This would provide (arguably unnecessarily) greater flexibility,
> e.g. if you have two PCI/MSI controller pairs, the MSIs only offer limited MSIs
> and you only use one PCI fabric - you could service different parts of the
> fabric by different MSI controllers (assuming you relate MSI controllers to
> part of the fabric and that you'd want to). Perhaps there would be benefits for
> virtualisation as well?

Is there actually hardware that supports this? I assumed that the MSI
controller would have to be tightly coupled to the PCI host bridge in
order to raise an interrupt when an MSI is received via PCI.

Thierry
Arnd Bergmann - Jan. 16, 2013, 2 p.m.
On Tuesday 15 January 2013, Thierry Reding wrote:
> Is there actually hardware that supports this? I assumed that the MSI
> controller would have to be tightly coupled to the PCI host bridge in
> order to raise an interrupt when an MSI is received via PCI.

No, as long as it's guaranteed that the MSI notification won't arrive
at the CPU before any inbound DMA data before it, the MSI controller
can be anywhere. Typically, the MSI controller is actually closer to
the CPU core than to the PCI bridge. On X86, I believe the MSI address
is on normally on the the "local APIC" on each CPU.

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Andrew Murray - Jan. 16, 2013, 4:17 p.m.
On Wed, Jan 16, 2013 at 02:00:26PM +0000, Arnd Bergmann wrote:
> On Tuesday 15 January 2013, Thierry Reding wrote:
> > Is there actually hardware that supports this? I assumed that the MSI
> > controller would have to be tightly coupled to the PCI host bridge in
> > order to raise an interrupt when an MSI is received via PCI.
> 
> No, as long as it's guaranteed that the MSI notification won't arrive
> at the CPU before any inbound DMA data before it, the MSI controller
> can be anywhere. Typically, the MSI controller is actually closer to
> the CPU core than to the PCI bridge. On X86, I believe the MSI address
> is on normally on the the "local APIC" on each CPU.

MSIs are indistinguishable from other memory-write transactions originating
from the RC other than the address they target. Anything that can capture
that write in the address space (even a page fault) could be an MSI controller
and call interrupt handlers. And so the RC / MSI controllers don't need to
be aware of each other.

Andrew Murray

--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Thierry Reding - Jan. 16, 2013, 6:31 p.m.
On Wed, Jan 16, 2013 at 04:17:16PM +0000, Andrew Murray wrote:
> On Wed, Jan 16, 2013 at 02:00:26PM +0000, Arnd Bergmann wrote:
> > On Tuesday 15 January 2013, Thierry Reding wrote:
> > > Is there actually hardware that supports this? I assumed that the MSI
> > > controller would have to be tightly coupled to the PCI host bridge in
> > > order to raise an interrupt when an MSI is received via PCI.
> > 
> > No, as long as it's guaranteed that the MSI notification won't arrive
> > at the CPU before any inbound DMA data before it, the MSI controller
> > can be anywhere. Typically, the MSI controller is actually closer to
> > the CPU core than to the PCI bridge. On X86, I believe the MSI address
> > is on normally on the the "local APIC" on each CPU.
> 
> MSIs are indistinguishable from other memory-write transactions originating
> from the RC other than the address they target. Anything that can capture
> that write in the address space (even a page fault) could be an MSI controller
> and call interrupt handlers. And so the RC / MSI controllers don't need to
> be aware of each other.

Alright, putting the functions into pci_ops doesn't sound like a very
good idea then. Or perhaps it would make sense for hardware where the
root complex and the MSI controller are handled by the same driver.
Basically it could be done as a shortcut and if those are not filled
in, the drivers could still opt to look up an MSI controller from a
phandle specified in DT.

Even another alternative would be to keep the functions within the
struct pci_ops and use generic ones if an external MSI controller is
used. Just tossing around ideas.

Thierry
Andrew Murray - Jan. 17, 2013, 3:42 p.m.
On Wed, Jan 16, 2013 at 06:31:01PM +0000, Thierry Reding wrote:
> Alright, putting the functions into pci_ops doesn't sound like a very
> good idea then. Or perhaps it would make sense for hardware where the
> root complex and the MSI controller are handled by the same driver.
> Basically it could be done as a shortcut and if those are not filled
> in, the drivers could still opt to look up an MSI controller from a
> phandle specified in DT.
> 
> Even another alternative would be to keep the functions within the
> struct pci_ops and use generic ones if an external MSI controller is
> used. Just tossing around ideas.

I think an ideal solution would be for additional logic in drivers/msi.c
(e.g. in functions like msi_capability_init) to determine (based on the
passed in pci_dev) which MSI controller ops to use. I'm not sure the best
way to implement an association between an MSI controller and PCI busses
(I believe arch/sparc does something like this - perhaps there will be
inspiration there).

As you've pointed out, most RCs will have their own MSI controllers - so
it should be easy to register and associate both together.

I've submitted my previous work on MSI controller registration, but it
doesn't quite solve this problem - perhaps it can be a starting point?

Andrew Murray

--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Thierry Reding - Jan. 17, 2013, 4:05 p.m.
On Thu, Jan 17, 2013 at 03:42:36PM +0000, Andrew Murray wrote:
> On Wed, Jan 16, 2013 at 06:31:01PM +0000, Thierry Reding wrote:
> > Alright, putting the functions into pci_ops doesn't sound like a very
> > good idea then. Or perhaps it would make sense for hardware where the
> > root complex and the MSI controller are handled by the same driver.
> > Basically it could be done as a shortcut and if those are not filled
> > in, the drivers could still opt to look up an MSI controller from a
> > phandle specified in DT.
> > 
> > Even another alternative would be to keep the functions within the
> > struct pci_ops and use generic ones if an external MSI controller is
> > used. Just tossing around ideas.
> 
> I think an ideal solution would be for additional logic in drivers/msi.c
> (e.g. in functions like msi_capability_init) to determine (based on the
> passed in pci_dev) which MSI controller ops to use. I'm not sure the best
> way to implement an association between an MSI controller and PCI busses
> (I believe arch/sparc does something like this - perhaps there will be
> inspiration there).
> 
> As you've pointed out, most RCs will have their own MSI controllers - so
> it should be easy to register and associate both together.
> 
> I've submitted my previous work on MSI controller registration, but it
> doesn't quite solve this problem - perhaps it can be a starting point?

We basically have two cases:

  - The PCI host bridge contains registers for MSI support. In that case
    it makes little sense to uncouple the MSI implementation from the
    host bridge driver.

  - An MSI controller exists outside of the PCI host bridge. The PCI
    host bridge would in that case have to lookup an MSI controller (via
    DT phandle or some other method).

In either of those cases, does it make sense to use the MSI support
outside the scope of the PCI infrastructure? That is, would devices
other than PCI devices be able to generate an MSI?

Thierry
Andrew Murray - Jan. 17, 2013, 4:22 p.m.
On Thu, Jan 17, 2013 at 04:05:02PM +0000, Thierry Reding wrote:
> On Thu, Jan 17, 2013 at 03:42:36PM +0000, Andrew Murray wrote:
> > On Wed, Jan 16, 2013 at 06:31:01PM +0000, Thierry Reding wrote:
> > > Alright, putting the functions into pci_ops doesn't sound like a very
> > > good idea then. Or perhaps it would make sense for hardware where the
> > > root complex and the MSI controller are handled by the same driver.
> > > Basically it could be done as a shortcut and if those are not filled
> > > in, the drivers could still opt to look up an MSI controller from a
> > > phandle specified in DT.
> > > 
> > > Even another alternative would be to keep the functions within the
> > > struct pci_ops and use generic ones if an external MSI controller is
> > > used. Just tossing around ideas.
> > 
> > I think an ideal solution would be for additional logic in drivers/msi.c
> > (e.g. in functions like msi_capability_init) to determine (based on the
> > passed in pci_dev) which MSI controller ops to use. I'm not sure the best
> > way to implement an association between an MSI controller and PCI busses
> > (I believe arch/sparc does something like this - perhaps there will be
> > inspiration there).
> > 
> > As you've pointed out, most RCs will have their own MSI controllers - so
> > it should be easy to register and associate both together.
> > 
> > I've submitted my previous work on MSI controller registration, but it
> > doesn't quite solve this problem - perhaps it can be a starting point?
> 
> We basically have two cases:
> 
>   - The PCI host bridge contains registers for MSI support. In that case
>     it makes little sense to uncouple the MSI implementation from the
>     host bridge driver.
> 
>   - An MSI controller exists outside of the PCI host bridge. The PCI
>     host bridge would in that case have to lookup an MSI controller (via
>     DT phandle or some other method).
> 
> In either of those cases, does it make sense to use the MSI support
> outside the scope of the PCI infrastructure? That is, would devices
> other than PCI devices be able to generate an MSI?

I've come around to your way of thinking. Your approach sounds good for
registration of MSI ops - let the RC host driver do it (it probably has its
own), or use a helper for following a phandle to get ops that are not part
of the driver. MSIs won't be used outside of PCI devices.

Though existing drivers will use MSI framework functions to request MSIs, that
will result in callbacks to the arch_setup_msi_irqs type functions. These
functions would need to be updated to find these new ops if they exist, i.e. by
traversing the pci_dev structure up to the RC and finding a suitable structure.

Perhaps the msi ops could live alongside pci_ops in the pci_bus structure. This
way when traversing up the buses from the provided pci_dev - the first bus with
msi ops populated would be used?

If no ops are found, the standard arch callbacks can be called - thus preserving
exiting functionality.

Andrew Murray


--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Thierry Reding - Jan. 17, 2013, 8:30 p.m.
On Thu, Jan 17, 2013 at 04:22:18PM +0000, Andrew Murray wrote:
> On Thu, Jan 17, 2013 at 04:05:02PM +0000, Thierry Reding wrote:
> > On Thu, Jan 17, 2013 at 03:42:36PM +0000, Andrew Murray wrote:
> > > On Wed, Jan 16, 2013 at 06:31:01PM +0000, Thierry Reding wrote:
> > > > Alright, putting the functions into pci_ops doesn't sound like a very
> > > > good idea then. Or perhaps it would make sense for hardware where the
> > > > root complex and the MSI controller are handled by the same driver.
> > > > Basically it could be done as a shortcut and if those are not filled
> > > > in, the drivers could still opt to look up an MSI controller from a
> > > > phandle specified in DT.
> > > > 
> > > > Even another alternative would be to keep the functions within the
> > > > struct pci_ops and use generic ones if an external MSI controller is
> > > > used. Just tossing around ideas.
> > > 
> > > I think an ideal solution would be for additional logic in drivers/msi.c
> > > (e.g. in functions like msi_capability_init) to determine (based on the
> > > passed in pci_dev) which MSI controller ops to use. I'm not sure the best
> > > way to implement an association between an MSI controller and PCI busses
> > > (I believe arch/sparc does something like this - perhaps there will be
> > > inspiration there).
> > > 
> > > As you've pointed out, most RCs will have their own MSI controllers - so
> > > it should be easy to register and associate both together.
> > > 
> > > I've submitted my previous work on MSI controller registration, but it
> > > doesn't quite solve this problem - perhaps it can be a starting point?
> > 
> > We basically have two cases:
> > 
> >   - The PCI host bridge contains registers for MSI support. In that case
> >     it makes little sense to uncouple the MSI implementation from the
> >     host bridge driver.
> > 
> >   - An MSI controller exists outside of the PCI host bridge. The PCI
> >     host bridge would in that case have to lookup an MSI controller (via
> >     DT phandle or some other method).
> > 
> > In either of those cases, does it make sense to use the MSI support
> > outside the scope of the PCI infrastructure? That is, would devices
> > other than PCI devices be able to generate an MSI?
> 
> I've come around to your way of thinking. Your approach sounds good for
> registration of MSI ops - let the RC host driver do it (it probably has its
> own), or use a helper for following a phandle to get ops that are not part
> of the driver. MSIs won't be used outside of PCI devices.
> 
> Though existing drivers will use MSI framework functions to request MSIs, that
> will result in callbacks to the arch_setup_msi_irqs type functions. These
> functions would need to be updated to find these new ops if they exist, i.e. by
> traversing the pci_dev structure up to the RC and finding a suitable structure.
> 
> Perhaps the msi ops could live alongside pci_ops in the pci_bus structure. This
> way when traversing up the buses from the provided pci_dev - the first bus with
> msi ops populated would be used?
> 
> If no ops are found, the standard arch callbacks can be called - thus preserving
> exiting functionality.

Yes, what you describe is exactly what I had in mind. I've been thinking
about a possible implementation and there may be some details that could
prove difficult to resolve. For instance, we likely need to pass context
around for the MSI ops, or else make sure that they can find the context
from the struct pci_dev or by traversing upwards from it.

I think for the case where the MSI hardware is controlled by the same
driver as the PCI host bridge, doing this is easy because the context
could be part of the PCI host bridge context, which in case of Tegra is
stored in struct pci_bus' sysdata field (which is actually an ARM struct
pci_sys_data and in turn stores a pointer to the struct tegra_pcie in
the .private_data field). Other drivers often just use a global variable
assuming that there will only ever be a single instance of the PCI host
bridge.

If the MSI controller is external to the PCI host bridge, things get a
little more complicated. The easiest way would probably be to store the
context along with the PCI host bridge context and use simple wrappers
around the actual implementations to retrieve the PHB context and pass
the attached MSI context.

Maybe this could even be made more generic by adding a struct msi_ops *
along with a struct msi_chip * in struct pci_bus. Perhaps I should try
and code something up to make things more concrete.

Thierry
Andrew Murray - Jan. 18, 2013, 9:18 a.m.
On Thu, Jan 17, 2013 at 08:30:10PM +0000, Thierry Reding wrote:
> On Thu, Jan 17, 2013 at 04:22:18PM +0000, Andrew Murray wrote:
> > On Thu, Jan 17, 2013 at 04:05:02PM +0000, Thierry Reding wrote:
> > > On Thu, Jan 17, 2013 at 03:42:36PM +0000, Andrew Murray wrote:
> > > > On Wed, Jan 16, 2013 at 06:31:01PM +0000, Thierry Reding wrote:
> > > > > Alright, putting the functions into pci_ops doesn't sound like a very
> > > > > good idea then. Or perhaps it would make sense for hardware where the
> > > > > root complex and the MSI controller are handled by the same driver.
> > > > > Basically it could be done as a shortcut and if those are not filled
> > > > > in, the drivers could still opt to look up an MSI controller from a
> > > > > phandle specified in DT.
> > > > > 
> > > > > Even another alternative would be to keep the functions within the
> > > > > struct pci_ops and use generic ones if an external MSI controller is
> > > > > used. Just tossing around ideas.
> > > > 
> > > > I think an ideal solution would be for additional logic in drivers/msi.c
> > > > (e.g. in functions like msi_capability_init) to determine (based on the
> > > > passed in pci_dev) which MSI controller ops to use. I'm not sure the best
> > > > way to implement an association between an MSI controller and PCI busses
> > > > (I believe arch/sparc does something like this - perhaps there will be
> > > > inspiration there).
> > > > 
> > > > As you've pointed out, most RCs will have their own MSI controllers - so
> > > > it should be easy to register and associate both together.
> > > > 
> > > > I've submitted my previous work on MSI controller registration, but it
> > > > doesn't quite solve this problem - perhaps it can be a starting point?
> > > 
> > > We basically have two cases:
> > > 
> > >   - The PCI host bridge contains registers for MSI support. In that case
> > >     it makes little sense to uncouple the MSI implementation from the
> > >     host bridge driver.
> > > 
> > >   - An MSI controller exists outside of the PCI host bridge. The PCI
> > >     host bridge would in that case have to lookup an MSI controller (via
> > >     DT phandle or some other method).
> > > 
> > > In either of those cases, does it make sense to use the MSI support
> > > outside the scope of the PCI infrastructure? That is, would devices
> > > other than PCI devices be able to generate an MSI?
> > 
> > I've come around to your way of thinking. Your approach sounds good for
> > registration of MSI ops - let the RC host driver do it (it probably has its
> > own), or use a helper for following a phandle to get ops that are not part
> > of the driver. MSIs won't be used outside of PCI devices.
> > 
> > Though existing drivers will use MSI framework functions to request MSIs, that
> > will result in callbacks to the arch_setup_msi_irqs type functions. These
> > functions would need to be updated to find these new ops if they exist, i.e. by
> > traversing the pci_dev structure up to the RC and finding a suitable structure.
> > 
> > Perhaps the msi ops could live alongside pci_ops in the pci_bus structure. This
> > way when traversing up the buses from the provided pci_dev - the first bus with
> > msi ops populated would be used?
> > 
> > If no ops are found, the standard arch callbacks can be called - thus preserving
> > exiting functionality.
> 
> Yes, what you describe is exactly what I had in mind. I've been thinking
> about a possible implementation and there may be some details that could
> prove difficult to resolve. For instance, we likely need to pass context
> around for the MSI ops, or else make sure that they can find the context
> from the struct pci_dev or by traversing upwards from it.
> 
> I think for the case where the MSI hardware is controlled by the same
> driver as the PCI host bridge, doing this is easy because the context
> could be part of the PCI host bridge context, which in case of Tegra is
> stored in struct pci_bus' sysdata field (which is actually an ARM struct
> pci_sys_data and in turn stores a pointer to the struct tegra_pcie in
> the .private_data field). Other drivers often just use a global variable
> assuming that there will only ever be a single instance of the PCI host
> bridge.

Yes.

> If the MSI controller is external to the PCI host bridge, things get a
> little more complicated. The easiest way would probably be to store the
> context along with the PCI host bridge context and use simple wrappers
> around the actual implementations to retrieve the PHB context and pass
> the attached MSI context.

This would be nice, but may not be necessary. The MSI controller could use
a global (file-scope) variable to hold context gained from its probe and
assume it will be the only instance of that MSI controller.

> 
> Maybe this could even be made more generic by adding a struct msi_ops *
> along with a struct msi_chip * in struct pci_bus. Perhaps I should try
> and code something up to make things more concrete.

This would be the most complete way to handle this.

Andrew Murray


--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Andrew Murray - Jan. 18, 2013, 9:56 a.m.
On Wed, Jan 09, 2013 at 08:43:10PM +0000, Thierry Reding wrote:
> Move the PCIe driver from arch/arm/mach-tegra into the drivers/pci/host
> directory. The motivation is to collect various host controller drivers
> in the same location in order to facilitate refactoring.
> 
> The Tegra PCIe driver has been largely rewritten, both in order to turn
> it into a proper platform driver and to add MSI (based on code by
> Krishna Kishore <kthota@nvidia.com>) as well as device tree support.
> 
> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>

[snip]

> +static int tegra_pcie_enable(struct tegra_pcie *pcie)
> +{
> +       struct hw_pci hw;
> +
> +       memset(&hw, 0, sizeof(hw));
> +
> +       hw.nr_controllers = 1;
> +       hw.private_data = (void **)&pcie;
> +       hw.setup = tegra_pcie_setup;
> +       hw.scan = tegra_pcie_scan_bus;
> +       hw.map_irq = tegra_pcie_map_irq;
> +
> +       pci_common_init(&hw);
> +
> +       return 0;
> +}

[snip]

> +static int tegra_pcie_probe(struct platform_device *pdev)
> +{
> +       struct device_node *port;
> +       struct tegra_pcie *pcie;
> +       int err;
> +
> +       pcie = devm_kzalloc(&pdev->dev, sizeof(*pcie), GFP_KERNEL);
> +       if (!pcie)
> +               return -ENOMEM;
> +
> +       INIT_LIST_HEAD(&pcie->ports);
> +       pcie->dev = &pdev->dev;
> +
> +       err = tegra_pcie_parse_dt(pcie);
> +       if (err < 0)
> +               return err;
> +
> +       pcibios_min_mem = 0;
> +
> +       err = tegra_pcie_get_resources(pcie);
> +       if (err < 0) {
> +               dev_err(&pdev->dev, "failed to request resources: %d\n", err);
> +               return err;
> +       }
> +
> +       err = tegra_pcie_enable_controller(pcie);
> +       if (err)
> +               goto put_resources;
> +
> +       /* probe root ports */
> +       for_each_child_of_node(pdev->dev.of_node, port) {
> +               if (!of_device_is_available(port))
> +                       continue;
> +
> +               err = tegra_pcie_add_port(pcie, port);
> +               if (err < 0) {
> +                       dev_err(&pdev->dev, "failed to add port %s: %d\n",
> +                               port->name, err);
> +               }
> +       }
> +
> +       /* setup the AFI address translations */
> +       tegra_pcie_setup_translations(pcie);
> +
> +       if (IS_ENABLED(CONFIG_PCI_MSI)) {
> +               err = tegra_pcie_enable_msi(pcie);
> +               if (err < 0) {
> +                       dev_err(&pdev->dev,
> +                               "failed to enable MSI support: %d\n",
> +                               err);
> +                       goto put_resources;
> +               }
> +       }
> +
> +       err = tegra_pcie_enable(pcie);
> +       if (err < 0) {
> +               dev_err(&pdev->dev, "failed to enable PCIe ports: %d\n", err);
> +               goto disable_msi;
> +       }
> +
> +       platform_set_drvdata(pdev, pcie);
> +       return 0;
> +
> +disable_msi:
> +       if (IS_ENABLED(CONFIG_PCI_MSI))
> +               tegra_pcie_disable_msi(pcie);
> +put_resources:
> +       tegra_pcie_put_resources(pcie);
> +       return err;
> +}
> +

[snip]

> +
> +static const struct of_device_id tegra_pcie_of_match[] = {
> +       { .compatible = "nvidia,tegra20-pcie", },
> +       { },
> +};
> +
> +static struct platform_driver tegra_pcie_driver = {
> +       .driver = {
> +               .name = "tegra-pcie",
> +               .owner = THIS_MODULE,
> +               .of_match_table = tegra_pcie_of_match,
> +       },
> +       .probe = tegra_pcie_probe,
> +       .remove = tegra_pcie_remove,
> +};
> +module_platform_driver(tegra_pcie_driver);

If you have multiple 'nvidia,tegra20-pcie's in your DT then you will end up
with multiple calls to tegra_pcie_probe/tegra_pcie_enable/pci_common_init.

However pci_common_init/pcibios_init_hw assumes it will only ever be called
once, and will thus result in trying to create multiple busses with the same
bus number. (The first root bus it creates is always zero provided you haven't
implemented hw->scan).

I have a patch for this if you want to fold it into your series? (I see you've
made changes to bios32 for per-controller data).

Andrew Murray

--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Thierry Reding - Jan. 18, 2013, 10:09 a.m.
On Fri, Jan 18, 2013 at 09:56:20AM +0000, Andrew Murray wrote:
> On Wed, Jan 09, 2013 at 08:43:10PM +0000, Thierry Reding wrote:
> > Move the PCIe driver from arch/arm/mach-tegra into the drivers/pci/host
> > directory. The motivation is to collect various host controller drivers
> > in the same location in order to facilitate refactoring.
> > 
> > The Tegra PCIe driver has been largely rewritten, both in order to turn
> > it into a proper platform driver and to add MSI (based on code by
> > Krishna Kishore <kthota@nvidia.com>) as well as device tree support.
> > 
> > Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
> 
> [snip]
> 
> > +static int tegra_pcie_enable(struct tegra_pcie *pcie)
> > +{
> > +       struct hw_pci hw;
> > +
> > +       memset(&hw, 0, sizeof(hw));
> > +
> > +       hw.nr_controllers = 1;
> > +       hw.private_data = (void **)&pcie;
> > +       hw.setup = tegra_pcie_setup;
> > +       hw.scan = tegra_pcie_scan_bus;
> > +       hw.map_irq = tegra_pcie_map_irq;
> > +
> > +       pci_common_init(&hw);
> > +
> > +       return 0;
> > +}
> 
> [snip]
> 
> > +static int tegra_pcie_probe(struct platform_device *pdev)
> > +{
> > +       struct device_node *port;
> > +       struct tegra_pcie *pcie;
> > +       int err;
> > +
> > +       pcie = devm_kzalloc(&pdev->dev, sizeof(*pcie), GFP_KERNEL);
> > +       if (!pcie)
> > +               return -ENOMEM;
> > +
> > +       INIT_LIST_HEAD(&pcie->ports);
> > +       pcie->dev = &pdev->dev;
> > +
> > +       err = tegra_pcie_parse_dt(pcie);
> > +       if (err < 0)
> > +               return err;
> > +
> > +       pcibios_min_mem = 0;
> > +
> > +       err = tegra_pcie_get_resources(pcie);
> > +       if (err < 0) {
> > +               dev_err(&pdev->dev, "failed to request resources: %d\n", err);
> > +               return err;
> > +       }
> > +
> > +       err = tegra_pcie_enable_controller(pcie);
> > +       if (err)
> > +               goto put_resources;
> > +
> > +       /* probe root ports */
> > +       for_each_child_of_node(pdev->dev.of_node, port) {
> > +               if (!of_device_is_available(port))
> > +                       continue;
> > +
> > +               err = tegra_pcie_add_port(pcie, port);
> > +               if (err < 0) {
> > +                       dev_err(&pdev->dev, "failed to add port %s: %d\n",
> > +                               port->name, err);
> > +               }
> > +       }
> > +
> > +       /* setup the AFI address translations */
> > +       tegra_pcie_setup_translations(pcie);
> > +
> > +       if (IS_ENABLED(CONFIG_PCI_MSI)) {
> > +               err = tegra_pcie_enable_msi(pcie);
> > +               if (err < 0) {
> > +                       dev_err(&pdev->dev,
> > +                               "failed to enable MSI support: %d\n",
> > +                               err);
> > +                       goto put_resources;
> > +               }
> > +       }
> > +
> > +       err = tegra_pcie_enable(pcie);
> > +       if (err < 0) {
> > +               dev_err(&pdev->dev, "failed to enable PCIe ports: %d\n", err);
> > +               goto disable_msi;
> > +       }
> > +
> > +       platform_set_drvdata(pdev, pcie);
> > +       return 0;
> > +
> > +disable_msi:
> > +       if (IS_ENABLED(CONFIG_PCI_MSI))
> > +               tegra_pcie_disable_msi(pcie);
> > +put_resources:
> > +       tegra_pcie_put_resources(pcie);
> > +       return err;
> > +}
> > +
> 
> [snip]
> 
> > +
> > +static const struct of_device_id tegra_pcie_of_match[] = {
> > +       { .compatible = "nvidia,tegra20-pcie", },
> > +       { },
> > +};
> > +
> > +static struct platform_driver tegra_pcie_driver = {
> > +       .driver = {
> > +               .name = "tegra-pcie",
> > +               .owner = THIS_MODULE,
> > +               .of_match_table = tegra_pcie_of_match,
> > +       },
> > +       .probe = tegra_pcie_probe,
> > +       .remove = tegra_pcie_remove,
> > +};
> > +module_platform_driver(tegra_pcie_driver);
> 
> If you have multiple 'nvidia,tegra20-pcie's in your DT then you will end up
> with multiple calls to tegra_pcie_probe/tegra_pcie_enable/pci_common_init.
> 
> However pci_common_init/pcibios_init_hw assumes it will only ever be called
> once, and will thus result in trying to create multiple busses with the same
> bus number. (The first root bus it creates is always zero provided you haven't
> implemented hw->scan).

Right, I hadn't noticed. There's currently no hardware that actually has
two PCIe host bridges but I wanted to keep the driver properly prepared
in case this ever happened.

Actually I've reimplemented hw->scan, but it still forwards the bus
number setup by pcibios_init_hw() (sys->busnr) to pci_create_root_bus()
so it will still break. I wonder, though, if a better approach would be
to take this number from the bus-range property in DT instead.

> I have a patch for this if you want to fold it into your series? (I see you've
> made changes to bios32 for per-controller data).

I would certainly like to take a look at it.

Thierry
Jason Gunthorpe - Jan. 22, 2013, 7:29 p.m.
On Thu, Jan 17, 2013 at 04:22:18PM +0000, Andrew Murray wrote:

> > In either of those cases, does it make sense to use the MSI support
> > outside the scope of the PCI infrastructure? That is, would devices
> > other than PCI devices be able to generate an MSI?
> 
> I've come around to your way of thinking. Your approach sounds good for
> registration of MSI ops - let the RC host driver do it (it probably has its
> own), or use a helper for following a phandle to get ops that are not part
> of the driver. MSIs won't be used outside of PCI devices.

Here is a bit of additional info on some MSI stuff..

This can be pretty complex. For instance on hyper transport systems
the PCI to HT bridge has an MSI controller that maps between PCI and
HT MSI formats, that mapping is configurable, so technically each
brige could be considered a MSI controller. Typically the mapping
controllers are all setup the same so there is not much problem with
this. However *native* HT devices can (which are super rare) can use a
different MSI format than PCI devices. From a linux perspective HT is
just a variant of PCI.
 
On x86 the MSI is delivered to the CPU APIC complex which converts it
into a vectored interrupt - part of the value of MSI is that the MSI
data can vector the interrupt to a specific CPU, or group of CPUs or
whatever.

Presumably SMP ARMs will evolve similar MSI based interrupt vectoring
capabilities, and presumably on-chip, non-PCI peripherals will evolve
options to use MSI as well (ie multi-queue ethernet). So it might be
worth giving some thought to how things could migrate in that
direction someday.

I have a bit hacky MSI driver for Kirkwood, this work you have to
generalize the interface could let me actually upstream it :) The MSI
is built using the Host2CPU doorbell registers, so it is entirely
unrelated to the PCI-E RC driver.

However, my use of the MSI driver on kirkwood is to assign MSIs to a
PCI-E device via non-standard registers, more like an on chip
peripheral. This is because the Host2CPU doorbell doesn't fit 100%
perfectly with the standard PCI MSI stuff, and the hardware has funny
needs.. So an 'allocate a MSI interrupt' API would be snazzy too :)

Jason
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Andrew Murray - Jan. 29, 2013, 1:31 p.m.
On Tue, Jan 22, 2013 at 07:29:01PM +0000, Jason Gunthorpe wrote:
> On Thu, Jan 17, 2013 at 04:22:18PM +0000, Andrew Murray wrote:
> 
> > > In either of those cases, does it make sense to use the MSI support
> > > outside the scope of the PCI infrastructure? That is, would devices
> > > other than PCI devices be able to generate an MSI?
> > 
> > I've come around to your way of thinking. Your approach sounds good for
> > registration of MSI ops - let the RC host driver do it (it probably has its
> > own), or use a helper for following a phandle to get ops that are not part
> > of the driver. MSIs won't be used outside of PCI devices.
> 
> Here is a bit of additional info on some MSI stuff..
> 
> This can be pretty complex. For instance on hyper transport systems
> the PCI to HT bridge has an MSI controller that maps between PCI and
> HT MSI formats, that mapping is configurable, so technically each
> brige could be considered a MSI controller. Typically the mapping
> controllers are all setup the same so there is not much problem with
> this. However *native* HT devices can (which are super rare) can use a
> different MSI format than PCI devices. From a linux perspective HT is
> just a variant of PCI.
>  
> On x86 the MSI is delivered to the CPU APIC complex which converts it
> into a vectored interrupt - part of the value of MSI is that the MSI
> data can vector the interrupt to a specific CPU, or group of CPUs or
> whatever.
> 
> Presumably SMP ARMs will evolve similar MSI based interrupt vectoring
> capabilities, and presumably on-chip, non-PCI peripherals will evolve
> options to use MSI as well (ie multi-queue ethernet). So it might be
> worth giving some thought to how things could migrate in that
> direction someday.
> 
> I have a bit hacky MSI driver for Kirkwood, this work you have to
> generalize the interface could let me actually upstream it :) The MSI
> is built using the Host2CPU doorbell registers, so it is entirely
> unrelated to the PCI-E RC driver.
> 
> However, my use of the MSI driver on kirkwood is to assign MSIs to a
> PCI-E device via non-standard registers, more like an on chip
> peripheral. This is because the Host2CPU doorbell doesn't fit 100%
> perfectly with the standard PCI MSI stuff, and the hardware has funny
> needs.. So an 'allocate a MSI interrupt' API would be snazzy too :)

Thanks for this. I believe Thierry may be working on improving the MSI
API - so perhaps we can see where that takes us.

Andrew Murray

--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Thomas Petazzoni - Feb. 13, 2013, 11:11 p.m.
Dear Grant Likely,

On Wed, 13 Feb 2013 22:59:50 +0000, Grant Likely wrote:

> There isn't a whole lot of value in this patch without another user.
> I'll need to see the other patches that make use of this.

See the proposed Marvell PCIe driver and Tegra PCIe driver:
 http://lists.infradead.org/pipermail/linux-arm-kernel/2013-February/149232.html
 http://lists.infradead.org/pipermail/linux-arm-kernel/2013-January/140649.html

Both Thierry (doing the Tegra PCIe driver) and myself (doing the
Marvell PCIe driver) already have fairly long patch series to add
support for the PCIe interfaces in our respective SoC. In order to ease
the process of getting those merged, we'd like to get some of the
base functions we depend on to be merged first, so that our patch
series become a bit smaller and therefore more manageable. My Marvell
PCIe patch series already has 32 patches (including the ones we are
currently discussing), and I will need even more patches for the
upcoming fourth version (due to additional comments made during the
review of the third version of the patch set).

So, it would really be helpful if this base infrastructure, for which
users already exist in the form of submitted patches, that have already
gone through multiple iterations, could be merged.

Thanks,

Thomas

Patch

diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
new file mode 100644
index 0000000..1ebc526
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
@@ -0,0 +1,115 @@ 
+NVIDIA Tegra PCIe controller
+
+Required properties:
+- compatible: "nvidia,tegra20-pcie"
+- reg: physical base address and length of the controller's registers
+- interrupts: the interrupt outputs of the controller
+- pex-clk-supply: supply voltage for internal reference clock
+- vdd-supply: power supply for controller (1.05V)
+- ranges: describes the translation of addresses for root ports
+- bus-range: range of bus numbers associated with this controller
+- #address-cells: address representation for root ports (must be 3)
+  - cell 0 specifies the bus and device numbers of the root port:
+    [23:16]: bus number
+    [15:11]: device number
+  - cell 1 denotes the upper 32 address bits and should be 0
+  - cell 2 contains the lower 32 address bits and is used to translate to the
+    CPU address space
+- #size-cells: size representation for root ports (must be 2)
+
+Root ports are defined as subnodes of the PCIe controller node.
+
+Required properties:
+- device_type: must be "pciex"
+- reg: address and size of the port configuration registers
+- #address-cells: must be 3
+- #size-cells: must be 2
+- ranges: sub-ranges distributed from the PCIe controller node
+- nvidia,num-lanes: number of lanes to use for this port
+
+Example:
+
+SoC DTSI:
+
+	pcie-controller {
+		compatible = "nvidia,tegra20-pcie";
+		reg = <0x80003000 0x00000800   /* PADS registers */
+		       0x80003800 0x00000200   /* AFI registers */
+		       0x81000000 0x01000000   /* configuration space */
+		       0x90000000 0x10000000>; /* extended configuration space */
+		interrupts = <0 98 0x04   /* controller interrupt */
+		              0 99 0x04>; /* MSI interrupt */
+		status = "disabled";
+
+		ranges = <0x000800 0 0x80000000 0x80000000 0 0x00001000   /* port 0 configuration space */
+			  0x000800 0 0x82000000 0x82000000 0 0x00010000   /* port 0 downstream I/O */
+			  0x000800 0 0xa0000000 0xa0000000 0 0x08000000   /* port 0 non-prefetchable memory */
+			  0x000800 0 0xb0000000 0xb0000000 0 0x08000000   /* port 0 prefetchable memory */
+
+			  0x001000 0 0x80001000 0x80001000 0 0x00001000   /* port 1 configuration space */
+			  0x001000 0 0x82010000 0x82010000 0 0x00010000   /* port 1 downstream I/O */
+			  0x001000 0 0xa8000000 0xa8000000 0 0x08000000   /* port 1 non-prefetchable memory */
+			  0x001000 0 0xb8000000 0xb8000000 0 0x08000000>; /* port 1 prefetchable memory */
+
+		bus-range = <0x00 0xff>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		pci@1,0 {
+			device_type = "pciex";
+			reg = <0x000800 0 0x80000000 0 0x1000>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x81000000 0 0 0x000800 0 0x82000000 0 0x00010000   /* I/O */
+				  0x82000000 0 0 0x000800 0 0xa0000000 0 0x08000000   /* non-prefetchable memory */
+				  0xc2000000 0 0 0x000800 0 0xb0000000 0 0x08000000>; /* prefetchable memory */
+
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@2,0 {
+			device_type = "pciex";
+			reg = <0x0010000 0 0x80001000 0 0x1000>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x81000000 0 0 0x001000 0 0x82010000 0 0x00010000   /* I/O */
+				  0x82000000 0 0 0x001000 0 0xa8000000 0 0x08000000   /* non-prefetchable memory */
+				  0xc2000000 0 0 0x001000 0 0xb8000000 0 0x08000000>; /* prefetchable memory */
+
+			nvidia,num-lanes = <2>;
+		};
+	};
+
+Board DTS:
+
+	pcie-controller {
+		vdd-supply = <&pci_vdd_reg>;
+		pex-clk-supply = <&pci_clk_reg>;
+		status = "okay";
+
+		/* root port 00:01.0 */
+		pci@1,0 {
+			status = "okay";
+
+			/* bridge 01:00.0 */
+			pci@0,0 {
+				reg = <0x010000 0 0 0 0>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+
+				device_type = "pci";
+
+				/* endpoint 02:00.0 */
+				pci@0,0 {
+					reg = <0x020000 0 0 0 0>;
+				};
+			};
+		};
+	};
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9862590..8853fef 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -653,6 +653,8 @@  config ARCH_TEGRA
 	select MIGHT_HAVE_CACHE_L2X0
 	select SPARSE_IRQ
 	select USE_OF
+	select MIGHT_HAVE_PCI
+	select ARCH_SUPPORTS_MSI
 	help
 	  This enables support for NVIDIA Tegra based systems (Tegra APX,
 	  Tegra 6xx and Tegra 2 series).
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 37973e6..1d30bf3 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -386,6 +386,51 @@ 
 		#size-cells = <0>;
 	};
 
+	pcie-controller {
+		compatible = "nvidia,tegra20-pcie";
+		reg = <0x80003000 0x00000800   /* PADS registers */
+		       0x80003800 0x00000200   /* AFI registers */
+		       0x90000000 0x10000000>; /* configuration space */
+		reg-names = "pads", "afi", "cs";
+		interrupts = <0 98 0x04   /* controller interrupt */
+		              0 99 0x04>; /* MSI interrupt */
+		interrupt-names = "intr", "msi";
+
+		bus-range = <0x00 0xff>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		ranges = <0x00000800 0 0x80000000 0x80000000 0 0x00001000   /* port 0 registers */
+			  0x00001000 0 0x80001000 0x80001000 0 0x00001000   /* port 1 registers */
+			  0x81000000 0 0          0x82000000 0 0x00010000   /* downstream I/O */
+			  0x82000000 0 0          0xa0000000 0 0x10000000   /* non-prefetchable memory */
+			  0xc2000000 0 0          0xb0000000 0 0x10000000>; /* prefetchable memory */
+
+		status = "disabled";
+
+		pci@1,0 {
+			device_type = "pciex";
+			reg = <0x000800 0 0x80000000 0 0x1000>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@2,0 {
+			device_type = "pciex";
+			reg = <0x001000 0 0x80001000 0 0x1000>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			nvidia,num-lanes = <2>;
+		};
+	};
+
 	usb@c5000000 {
 		compatible = "nvidia,tegra20-ehci", "usb-ehci";
 		reg = <0xc5000000 0x4000>;
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index 1ec7f80..79aa3bf 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -44,11 +44,6 @@  config ARCH_TEGRA_3x_SOC
 	  Support for NVIDIA Tegra T30 processor family, based on the
 	  ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
 
-config TEGRA_PCI
-	bool "PCI Express support"
-	depends on ARCH_TEGRA_2x_SOC
-	select PCI
-
 config TEGRA_AHB
 	bool "Enable AHB driver for NVIDIA Tegra SoCs"
 	default y
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index 660ee03..463a77e 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -29,7 +29,6 @@  endif
 obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)               += hotplug.o
 obj-$(CONFIG_CPU_FREQ)                  += cpu-tegra.o
-obj-$(CONFIG_TEGRA_PCI)			+= pcie.o
 
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= board-dt-tegra20.o
 obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= board-dt-tegra30.o
diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c
index 5d28db3..5644dfb 100644
--- a/arch/arm/mach-tegra/board-dt-tegra20.c
+++ b/arch/arm/mach-tegra/board-dt-tegra20.c
@@ -148,11 +148,7 @@  static void __init tegra_dt_init(void)
 static void __init trimslice_init(void)
 {
 #ifdef CONFIG_TEGRA_PCI
-	int ret;
-
-	ret = tegra_pcie_init(true, true);
-	if (ret)
-		pr_err("tegra_pci_init() failed: %d\n", ret);
+	platform_device_register(&tegra_pcie_device);
 #endif
 }
 
diff --git a/arch/arm/mach-tegra/board-harmony-pcie.c b/arch/arm/mach-tegra/board-harmony-pcie.c
index 3cdc1bb..94c0529 100644
--- a/arch/arm/mach-tegra/board-harmony-pcie.c
+++ b/arch/arm/mach-tegra/board-harmony-pcie.c
@@ -23,11 +23,12 @@ 
 
 #include <asm/mach-types.h>
 
+#include <mach/pci-tegra.h>
+
 #include "board.h"
 
 #ifdef CONFIG_TEGRA_PCI
-
-int __init harmony_pcie_init(void)
+static int harmony_pcie_board_init(struct platform_device *pdev)
 {
 	struct device_node *np;
 	int en_vdd_1v05;
@@ -64,21 +65,24 @@  int __init harmony_pcie_init(void)
 
 	regulator_enable(regulator);
 
-	err = tegra_pcie_init(true, true);
-	if (err) {
-		pr_err("%s: tegra_pcie_init failed: %d\n", __func__, err);
-		goto err_pcie;
-	}
-
 	return 0;
 
-err_pcie:
-	regulator_disable(regulator);
-	regulator_put(regulator);
 err_reg:
 	gpio_free(en_vdd_1v05);
 
 	return err;
 }
 
+int __init harmony_pcie_init(void)
+{
+	tegra_pcie_pdata.init = harmony_pcie_board_init;
+	platform_device_register(&tegra_pcie_device);
+
+	return 0;
+}
+#else
+int __init harmony_pcie_init(void)
+{
+	return 0;
+}
 #endif
diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h
index da8f5a3..8294ed3 100644
--- a/arch/arm/mach-tegra/board.h
+++ b/arch/arm/mach-tegra/board.h
@@ -30,7 +30,6 @@  void __init tegra30_init_early(void);
 void __init tegra_map_common_io(void);
 void __init tegra_init_irq(void);
 void __init tegra_dt_init_irq(void);
-int __init tegra_pcie_init(bool init_port0, bool init_port1);
 
 void tegra_init_late(void);
 
@@ -49,6 +48,9 @@  static inline int tegra_powergate_debugfs_init(void) { return 0; }
 int __init harmony_regulator_init(void);
 #ifdef CONFIG_TEGRA_PCI
 int __init harmony_pcie_init(void);
+
+extern struct tegra_pcie_pdata tegra_pcie_pdata;
+extern struct platform_device tegra_pcie_device;
 #else
 static inline int harmony_pcie_init(void) { return 0; }
 #endif
diff --git a/arch/arm/mach-tegra/iomap.h b/arch/arm/mach-tegra/iomap.h
index db8be51..216046d 100644
--- a/arch/arm/mach-tegra/iomap.h
+++ b/arch/arm/mach-tegra/iomap.h
@@ -287,9 +287,6 @@ 
 #define IO_APB_VIRT	IOMEM(0xFE300000)
 #define IO_APB_SIZE	SZ_1M
 
-#define TEGRA_PCIE_BASE		0x80000000
-#define TEGRA_PCIE_IO_BASE	(TEGRA_PCIE_BASE + SZ_4M)
-
 #define IO_TO_VIRT_BETWEEN(p, st, sz)	((p) >= (st) && (p) < ((st) + (sz)))
 #define IO_TO_VIRT_XLATE(p, pst, vst)	(((p) - (pst) + (vst)))
 
diff --git a/arch/arm/mach-tegra/pcie.c b/arch/arm/mach-tegra/pcie.c
deleted file mode 100644
index c2d55f8..0000000
--- a/arch/arm/mach-tegra/pcie.c
+++ /dev/null
@@ -1,865 +0,0 @@ 
-/*
- * arch/arm/mach-tegra/pci.c
- *
- * PCIe host controller driver for TEGRA(2) SOCs
- *
- * Copyright (c) 2010, CompuLab, Ltd.
- * Author: Mike Rapoport <mike@compulab.co.il>
- *
- * Based on NVIDIA PCIe driver
- * Copyright (c) 2008-2009, NVIDIA Corporation.
- *
- * Bits taken from arch/arm/mach-dove/pcie.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/export.h>
-
-#include <asm/sizes.h>
-#include <asm/mach/pci.h>
-
-#include <mach/clk.h>
-#include <mach/powergate.h>
-
-#include "board.h"
-#include "iomap.h"
-#include "pmc.h"
-
-/* Hack - need to parse this from DT */
-#define INT_PCIE_INTR 130
-
-/* register definitions */
-#define AFI_OFFSET	0x3800
-#define PADS_OFFSET	0x3000
-#define RP0_OFFSET	0x0000
-#define RP1_OFFSET	0x1000
-
-#define AFI_AXI_BAR0_SZ	0x00
-#define AFI_AXI_BAR1_SZ	0x04
-#define AFI_AXI_BAR2_SZ	0x08
-#define AFI_AXI_BAR3_SZ	0x0c
-#define AFI_AXI_BAR4_SZ	0x10
-#define AFI_AXI_BAR5_SZ	0x14
-
-#define AFI_AXI_BAR0_START	0x18
-#define AFI_AXI_BAR1_START	0x1c
-#define AFI_AXI_BAR2_START	0x20
-#define AFI_AXI_BAR3_START	0x24
-#define AFI_AXI_BAR4_START	0x28
-#define AFI_AXI_BAR5_START	0x2c
-
-#define AFI_FPCI_BAR0	0x30
-#define AFI_FPCI_BAR1	0x34
-#define AFI_FPCI_BAR2	0x38
-#define AFI_FPCI_BAR3	0x3c
-#define AFI_FPCI_BAR4	0x40
-#define AFI_FPCI_BAR5	0x44
-
-#define AFI_CACHE_BAR0_SZ	0x48
-#define AFI_CACHE_BAR0_ST	0x4c
-#define AFI_CACHE_BAR1_SZ	0x50
-#define AFI_CACHE_BAR1_ST	0x54
-
-#define AFI_MSI_BAR_SZ		0x60
-#define AFI_MSI_FPCI_BAR_ST	0x64
-#define AFI_MSI_AXI_BAR_ST	0x68
-
-#define AFI_CONFIGURATION		0xac
-#define  AFI_CONFIGURATION_EN_FPCI	(1 << 0)
-
-#define AFI_FPCI_ERROR_MASKS	0xb0
-
-#define AFI_INTR_MASK		0xb4
-#define  AFI_INTR_MASK_INT_MASK	(1 << 0)
-#define  AFI_INTR_MASK_MSI_MASK	(1 << 8)
-
-#define AFI_INTR_CODE		0xb8
-#define  AFI_INTR_CODE_MASK	0xf
-#define  AFI_INTR_MASTER_ABORT	4
-#define  AFI_INTR_LEGACY	6
-
-#define AFI_INTR_SIGNATURE	0xbc
-#define AFI_SM_INTR_ENABLE	0xc4
-
-#define AFI_AFI_INTR_ENABLE		0xc8
-#define  AFI_INTR_EN_INI_SLVERR		(1 << 0)
-#define  AFI_INTR_EN_INI_DECERR		(1 << 1)
-#define  AFI_INTR_EN_TGT_SLVERR		(1 << 2)
-#define  AFI_INTR_EN_TGT_DECERR		(1 << 3)
-#define  AFI_INTR_EN_TGT_WRERR		(1 << 4)
-#define  AFI_INTR_EN_DFPCI_DECERR	(1 << 5)
-#define  AFI_INTR_EN_AXI_DECERR		(1 << 6)
-#define  AFI_INTR_EN_FPCI_TIMEOUT	(1 << 7)
-
-#define AFI_PCIE_CONFIG					0x0f8
-#define  AFI_PCIE_CONFIG_PCIEC0_DISABLE_DEVICE		(1 << 1)
-#define  AFI_PCIE_CONFIG_PCIEC1_DISABLE_DEVICE		(1 << 2)
-#define  AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_MASK	(0xf << 20)
-#define  AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_SINGLE	(0x0 << 20)
-#define  AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_DUAL	(0x1 << 20)
-
-#define AFI_FUSE			0x104
-#define  AFI_FUSE_PCIE_T0_GEN2_DIS	(1 << 2)
-
-#define AFI_PEX0_CTRL			0x110
-#define AFI_PEX1_CTRL			0x118
-#define  AFI_PEX_CTRL_RST		(1 << 0)
-#define  AFI_PEX_CTRL_REFCLK_EN		(1 << 3)
-
-#define RP_VEND_XP	0x00000F00
-#define  RP_VEND_XP_DL_UP	(1 << 30)
-
-#define RP_LINK_CONTROL_STATUS			0x00000090
-#define  RP_LINK_CONTROL_STATUS_LINKSTAT_MASK	0x3fff0000
-
-#define PADS_CTL_SEL		0x0000009C
-
-#define PADS_CTL		0x000000A0
-#define  PADS_CTL_IDDQ_1L	(1 << 0)
-#define  PADS_CTL_TX_DATA_EN_1L	(1 << 6)
-#define  PADS_CTL_RX_DATA_EN_1L	(1 << 10)
-
-#define PADS_PLL_CTL				0x000000B8
-#define  PADS_PLL_CTL_RST_B4SM			(1 << 1)
-#define  PADS_PLL_CTL_LOCKDET			(1 << 8)
-#define  PADS_PLL_CTL_REFCLK_MASK		(0x3 << 16)
-#define  PADS_PLL_CTL_REFCLK_INTERNAL_CML	(0 << 16)
-#define  PADS_PLL_CTL_REFCLK_INTERNAL_CMOS	(1 << 16)
-#define  PADS_PLL_CTL_REFCLK_EXTERNAL		(2 << 16)
-#define  PADS_PLL_CTL_TXCLKREF_MASK		(0x1 << 20)
-#define  PADS_PLL_CTL_TXCLKREF_DIV10		(0 << 20)
-#define  PADS_PLL_CTL_TXCLKREF_DIV5		(1 << 20)
-
-/*
- * Tegra2 defines 1GB in the AXI address map for PCIe.
- *
- * That address space is split into different regions, with sizes and
- * offsets as follows:
- *
- * 0x80000000 - 0x80003fff - PCI controller registers
- * 0x80004000 - 0x80103fff - PCI configuration space
- * 0x80104000 - 0x80203fff - PCI extended configuration space
- * 0x80203fff - 0x803fffff - unused
- * 0x80400000 - 0x8040ffff - downstream IO
- * 0x80410000 - 0x8fffffff - unused
- * 0x90000000 - 0x9fffffff - non-prefetchable memory
- * 0xa0000000 - 0xbfffffff - prefetchable memory
- */
-#define PCIE_REGS_SZ		SZ_16K
-#define PCIE_CFG_OFF		PCIE_REGS_SZ
-#define PCIE_CFG_SZ		SZ_1M
-#define PCIE_EXT_CFG_OFF	(PCIE_CFG_SZ + PCIE_CFG_OFF)
-#define PCIE_EXT_CFG_SZ		SZ_1M
-#define PCIE_IOMAP_SZ		(PCIE_REGS_SZ + PCIE_CFG_SZ + PCIE_EXT_CFG_SZ)
-
-#define MEM_BASE_0		(TEGRA_PCIE_BASE + SZ_256M)
-#define MEM_SIZE_0		SZ_128M
-#define MEM_BASE_1		(MEM_BASE_0 + MEM_SIZE_0)
-#define MEM_SIZE_1		SZ_128M
-#define PREFETCH_MEM_BASE_0	(MEM_BASE_1 + MEM_SIZE_1)
-#define PREFETCH_MEM_SIZE_0	SZ_128M
-#define PREFETCH_MEM_BASE_1	(PREFETCH_MEM_BASE_0 + PREFETCH_MEM_SIZE_0)
-#define PREFETCH_MEM_SIZE_1	SZ_128M
-
-#define  PCIE_CONF_BUS(b)	((b) << 16)
-#define  PCIE_CONF_DEV(d)	((d) << 11)
-#define  PCIE_CONF_FUNC(f)	((f) << 8)
-#define  PCIE_CONF_REG(r)	\
-	(((r) & ~0x3) | (((r) < 256) ? PCIE_CFG_OFF : PCIE_EXT_CFG_OFF))
-
-struct tegra_pcie_port {
-	int			index;
-	u8			root_bus_nr;
-	void __iomem		*base;
-
-	bool			link_up;
-
-	char			mem_space_name[16];
-	char			prefetch_space_name[20];
-	struct resource		res[2];
-};
-
-struct tegra_pcie_info {
-	struct tegra_pcie_port	port[2];
-	int			num_ports;
-
-	void __iomem		*regs;
-	struct resource		res_mmio;
-
-	struct clk		*pex_clk;
-	struct clk		*afi_clk;
-	struct clk		*pcie_xclk;
-	struct clk		*pll_e;
-};
-
-static struct tegra_pcie_info tegra_pcie;
-
-static inline void afi_writel(u32 value, unsigned long offset)
-{
-	writel(value, offset + AFI_OFFSET + tegra_pcie.regs);
-}
-
-static inline u32 afi_readl(unsigned long offset)
-{
-	return readl(offset + AFI_OFFSET + tegra_pcie.regs);
-}
-
-static inline void pads_writel(u32 value, unsigned long offset)
-{
-	writel(value, offset + PADS_OFFSET + tegra_pcie.regs);
-}
-
-static inline u32 pads_readl(unsigned long offset)
-{
-	return readl(offset + PADS_OFFSET + tegra_pcie.regs);
-}
-
-static struct tegra_pcie_port *bus_to_port(int bus)
-{
-	int i;
-
-	for (i = tegra_pcie.num_ports - 1; i >= 0; i--) {
-		int rbus = tegra_pcie.port[i].root_bus_nr;
-		if (rbus != -1 && rbus == bus)
-			break;
-	}
-
-	return i >= 0 ? tegra_pcie.port + i : NULL;
-}
-
-static int tegra_pcie_read_conf(struct pci_bus *bus, unsigned int devfn,
-				int where, int size, u32 *val)
-{
-	struct tegra_pcie_port *pp = bus_to_port(bus->number);
-	void __iomem *addr;
-
-	if (pp) {
-		if (devfn != 0) {
-			*val = 0xffffffff;
-			return PCIBIOS_DEVICE_NOT_FOUND;
-		}
-
-		addr = pp->base + (where & ~0x3);
-	} else {
-		addr = tegra_pcie.regs + (PCIE_CONF_BUS(bus->number) +
-					  PCIE_CONF_DEV(PCI_SLOT(devfn)) +
-					  PCIE_CONF_FUNC(PCI_FUNC(devfn)) +
-					  PCIE_CONF_REG(where));
-	}
-
-	*val = readl(addr);
-
-	if (size == 1)
-		*val = (*val >> (8 * (where & 3))) & 0xff;
-	else if (size == 2)
-		*val = (*val >> (8 * (where & 3))) & 0xffff;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int tegra_pcie_write_conf(struct pci_bus *bus, unsigned int devfn,
-				 int where, int size, u32 val)
-{
-	struct tegra_pcie_port *pp = bus_to_port(bus->number);
-	void __iomem *addr;
-
-	u32 mask;
-	u32 tmp;
-
-	if (pp) {
-		if (devfn != 0)
-			return PCIBIOS_DEVICE_NOT_FOUND;
-
-		addr = pp->base + (where & ~0x3);
-	} else {
-		addr = tegra_pcie.regs + (PCIE_CONF_BUS(bus->number) +
-					  PCIE_CONF_DEV(PCI_SLOT(devfn)) +
-					  PCIE_CONF_FUNC(PCI_FUNC(devfn)) +
-					  PCIE_CONF_REG(where));
-	}
-
-	if (size == 4) {
-		writel(val, addr);
-		return PCIBIOS_SUCCESSFUL;
-	}
-
-	if (size == 2)
-		mask = ~(0xffff << ((where & 0x3) * 8));
-	else if (size == 1)
-		mask = ~(0xff << ((where & 0x3) * 8));
-	else
-		return PCIBIOS_BAD_REGISTER_NUMBER;
-
-	tmp = readl(addr) & mask;
-	tmp |= val << ((where & 0x3) * 8);
-	writel(tmp, addr);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops tegra_pcie_ops = {
-	.read	= tegra_pcie_read_conf,
-	.write	= tegra_pcie_write_conf,
-};
-
-static void tegra_pcie_fixup_bridge(struct pci_dev *dev)
-{
-	u16 reg;
-
-	if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE) {
-		pci_read_config_word(dev, PCI_COMMAND, &reg);
-		reg |= (PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
-			PCI_COMMAND_MASTER | PCI_COMMAND_SERR);
-		pci_write_config_word(dev, PCI_COMMAND, reg);
-	}
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, tegra_pcie_fixup_bridge);
-
-/* Tegra PCIE root complex wrongly reports device class */
-static void tegra_pcie_fixup_class(struct pci_dev *dev)
-{
-	dev->class = PCI_CLASS_BRIDGE_PCI << 8;
-}
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0bf0, tegra_pcie_fixup_class);
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0bf1, tegra_pcie_fixup_class);
-
-/* Tegra PCIE requires relaxed ordering */
-static void tegra_pcie_relax_enable(struct pci_dev *dev)
-{
-	pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_RELAX_EN);
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, tegra_pcie_relax_enable);
-
-static int tegra_pcie_setup(int nr, struct pci_sys_data *sys)
-{
-	struct tegra_pcie_port *pp;
-
-	if (nr >= tegra_pcie.num_ports)
-		return 0;
-
-	pp = tegra_pcie.port + nr;
-	pp->root_bus_nr = sys->busnr;
-
-	pci_ioremap_io(nr * SZ_64K, TEGRA_PCIE_IO_BASE);
-
-	/*
-	 * IORESOURCE_MEM
-	 */
-	snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
-		 "PCIe %d MEM", pp->index);
-	pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0;
-	pp->res[0].name = pp->mem_space_name;
-	if (pp->index == 0) {
-		pp->res[0].start = MEM_BASE_0;
-		pp->res[0].end = pp->res[0].start + MEM_SIZE_0 - 1;
-	} else {
-		pp->res[0].start = MEM_BASE_1;
-		pp->res[0].end = pp->res[0].start + MEM_SIZE_1 - 1;
-	}
-	pp->res[0].flags = IORESOURCE_MEM;
-	if (request_resource(&iomem_resource, &pp->res[0]))
-		panic("Request PCIe Memory resource failed\n");
-	pci_add_resource_offset(&sys->resources, &pp->res[0], sys->mem_offset);
-
-	/*
-	 * IORESOURCE_MEM | IORESOURCE_PREFETCH
-	 */
-	snprintf(pp->prefetch_space_name, sizeof(pp->prefetch_space_name),
-		 "PCIe %d PREFETCH MEM", pp->index);
-	pp->prefetch_space_name[sizeof(pp->prefetch_space_name) - 1] = 0;
-	pp->res[1].name = pp->prefetch_space_name;
-	if (pp->index == 0) {
-		pp->res[1].start = PREFETCH_MEM_BASE_0;
-		pp->res[1].end = pp->res[1].start + PREFETCH_MEM_SIZE_0 - 1;
-	} else {
-		pp->res[1].start = PREFETCH_MEM_BASE_1;
-		pp->res[1].end = pp->res[1].start + PREFETCH_MEM_SIZE_1 - 1;
-	}
-	pp->res[1].flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
-	if (request_resource(&iomem_resource, &pp->res[1]))
-		panic("Request PCIe Prefetch Memory resource failed\n");
-	pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset);
-
-	return 1;
-}
-
-static int tegra_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	return INT_PCIE_INTR;
-}
-
-static struct pci_bus __init *tegra_pcie_scan_bus(int nr,
-						  struct pci_sys_data *sys)
-{
-	struct tegra_pcie_port *pp;
-
-	if (nr >= tegra_pcie.num_ports)
-		return NULL;
-
-	pp = tegra_pcie.port + nr;
-	pp->root_bus_nr = sys->busnr;
-
-	return pci_scan_root_bus(NULL, sys->busnr, &tegra_pcie_ops, sys,
-				 &sys->resources);
-}
-
-static struct hw_pci tegra_pcie_hw __initdata = {
-	.nr_controllers	= 2,
-	.setup		= tegra_pcie_setup,
-	.scan		= tegra_pcie_scan_bus,
-	.map_irq	= tegra_pcie_map_irq,
-};
-
-
-static irqreturn_t tegra_pcie_isr(int irq, void *arg)
-{
-	const char *err_msg[] = {
-		"Unknown",
-		"AXI slave error",
-		"AXI decode error",
-		"Target abort",
-		"Master abort",
-		"Invalid write",
-		"Response decoding error",
-		"AXI response decoding error",
-		"Transcation timeout",
-	};
-
-	u32 code, signature;
-
-	code = afi_readl(AFI_INTR_CODE) & AFI_INTR_CODE_MASK;
-	signature = afi_readl(AFI_INTR_SIGNATURE);
-	afi_writel(0, AFI_INTR_CODE);
-
-	if (code == AFI_INTR_LEGACY)
-		return IRQ_NONE;
-
-	if (code >= ARRAY_SIZE(err_msg))
-		code = 0;
-
-	/*
-	 * do not pollute kernel log with master abort reports since they
-	 * happen a lot during enumeration
-	 */
-	if (code == AFI_INTR_MASTER_ABORT)
-		pr_debug("PCIE: %s, signature: %08x\n", err_msg[code], signature);
-	else
-		pr_err("PCIE: %s, signature: %08x\n", err_msg[code], signature);
-
-	return IRQ_HANDLED;
-}
-
-static void tegra_pcie_setup_translations(void)
-{
-	u32 fpci_bar;
-	u32 size;
-	u32 axi_address;
-
-	/* Bar 0: config Bar */
-	fpci_bar = ((u32)0xfdff << 16);
-	size = PCIE_CFG_SZ;
-	axi_address = TEGRA_PCIE_BASE + PCIE_CFG_OFF;
-	afi_writel(axi_address, AFI_AXI_BAR0_START);
-	afi_writel(size >> 12, AFI_AXI_BAR0_SZ);
-	afi_writel(fpci_bar, AFI_FPCI_BAR0);
-
-	/* Bar 1: extended config Bar */
-	fpci_bar = ((u32)0xfe1 << 20);
-	size = PCIE_EXT_CFG_SZ;
-	axi_address = TEGRA_PCIE_BASE + PCIE_EXT_CFG_OFF;
-	afi_writel(axi_address, AFI_AXI_BAR1_START);
-	afi_writel(size >> 12, AFI_AXI_BAR1_SZ);
-	afi_writel(fpci_bar, AFI_FPCI_BAR1);
-
-	/* Bar 2: downstream IO bar */
-	fpci_bar = ((__u32)0xfdfc << 16);
-	size = SZ_128K;
-	axi_address = TEGRA_PCIE_IO_BASE;
-	afi_writel(axi_address, AFI_AXI_BAR2_START);
-	afi_writel(size >> 12, AFI_AXI_BAR2_SZ);
-	afi_writel(fpci_bar, AFI_FPCI_BAR2);
-
-	/* Bar 3: prefetchable memory BAR */
-	fpci_bar = (((PREFETCH_MEM_BASE_0 >> 12) & 0x0fffffff) << 4) | 0x1;
-	size =  PREFETCH_MEM_SIZE_0 +  PREFETCH_MEM_SIZE_1;
-	axi_address = PREFETCH_MEM_BASE_0;
-	afi_writel(axi_address, AFI_AXI_BAR3_START);
-	afi_writel(size >> 12, AFI_AXI_BAR3_SZ);
-	afi_writel(fpci_bar, AFI_FPCI_BAR3);
-
-	/* Bar 4: non prefetchable memory BAR */
-	fpci_bar = (((MEM_BASE_0 >> 12)	& 0x0FFFFFFF) << 4) | 0x1;
-	size = MEM_SIZE_0 + MEM_SIZE_1;
-	axi_address = MEM_BASE_0;
-	afi_writel(axi_address, AFI_AXI_BAR4_START);
-	afi_writel(size >> 12, AFI_AXI_BAR4_SZ);
-	afi_writel(fpci_bar, AFI_FPCI_BAR4);
-
-	/* Bar 5: NULL out the remaining BAR as it is not used */
-	fpci_bar = 0;
-	size = 0;
-	axi_address = 0;
-	afi_writel(axi_address, AFI_AXI_BAR5_START);
-	afi_writel(size >> 12, AFI_AXI_BAR5_SZ);
-	afi_writel(fpci_bar, AFI_FPCI_BAR5);
-
-	/* map all upstream transactions as uncached */
-	afi_writel(PHYS_OFFSET, AFI_CACHE_BAR0_ST);
-	afi_writel(0, AFI_CACHE_BAR0_SZ);
-	afi_writel(0, AFI_CACHE_BAR1_ST);
-	afi_writel(0, AFI_CACHE_BAR1_SZ);
-
-	/* No MSI */
-	afi_writel(0, AFI_MSI_FPCI_BAR_ST);
-	afi_writel(0, AFI_MSI_BAR_SZ);
-	afi_writel(0, AFI_MSI_AXI_BAR_ST);
-	afi_writel(0, AFI_MSI_BAR_SZ);
-}
-
-static int tegra_pcie_enable_controller(void)
-{
-	u32 val, reg;
-	int i, timeout;
-
-	/* Enable slot clock and pulse the reset signals */
-	for (i = 0, reg = AFI_PEX0_CTRL; i < 2; i++, reg += 0x8) {
-		val = afi_readl(reg) |  AFI_PEX_CTRL_REFCLK_EN;
-		afi_writel(val, reg);
-		val &= ~AFI_PEX_CTRL_RST;
-		afi_writel(val, reg);
-
-		val = afi_readl(reg) | AFI_PEX_CTRL_RST;
-		afi_writel(val, reg);
-	}
-
-	/* Enable dual controller and both ports */
-	val = afi_readl(AFI_PCIE_CONFIG);
-	val &= ~(AFI_PCIE_CONFIG_PCIEC0_DISABLE_DEVICE |
-		 AFI_PCIE_CONFIG_PCIEC1_DISABLE_DEVICE |
-		 AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_MASK);
-	val |= AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_DUAL;
-	afi_writel(val, AFI_PCIE_CONFIG);
-
-	val = afi_readl(AFI_FUSE) & ~AFI_FUSE_PCIE_T0_GEN2_DIS;
-	afi_writel(val, AFI_FUSE);
-
-	/* Initialze internal PHY, enable up to 16 PCIE lanes */
-	pads_writel(0x0, PADS_CTL_SEL);
-
-	/* override IDDQ to 1 on all 4 lanes */
-	val = pads_readl(PADS_CTL) | PADS_CTL_IDDQ_1L;
-	pads_writel(val, PADS_CTL);
-
-	/*
-	 * set up PHY PLL inputs select PLLE output as refclock,
-	 * set TX ref sel to div10 (not div5)
-	 */
-	val = pads_readl(PADS_PLL_CTL);
-	val &= ~(PADS_PLL_CTL_REFCLK_MASK | PADS_PLL_CTL_TXCLKREF_MASK);
-	val |= (PADS_PLL_CTL_REFCLK_INTERNAL_CML | PADS_PLL_CTL_TXCLKREF_DIV10);
-	pads_writel(val, PADS_PLL_CTL);
-
-	/* take PLL out of reset  */
-	val = pads_readl(PADS_PLL_CTL) | PADS_PLL_CTL_RST_B4SM;
-	pads_writel(val, PADS_PLL_CTL);
-
-	/*
-	 * Hack, set the clock voltage to the DEFAULT provided by hw folks.
-	 * This doesn't exist in the documentation
-	 */
-	pads_writel(0xfa5cfa5c, 0xc8);
-
-	/* Wait for the PLL to lock */
-	timeout = 300;
-	do {
-		val = pads_readl(PADS_PLL_CTL);
-		usleep_range(1000, 1000);
-		if (--timeout == 0) {
-			pr_err("Tegra PCIe error: timeout waiting for PLL\n");
-			return -EBUSY;
-		}
-	} while (!(val & PADS_PLL_CTL_LOCKDET));
-
-	/* turn off IDDQ override */
-	val = pads_readl(PADS_CTL) & ~PADS_CTL_IDDQ_1L;
-	pads_writel(val, PADS_CTL);
-
-	/* enable TX/RX data */
-	val = pads_readl(PADS_CTL);
-	val |= (PADS_CTL_TX_DATA_EN_1L | PADS_CTL_RX_DATA_EN_1L);
-	pads_writel(val, PADS_CTL);
-
-	/* Take the PCIe interface module out of reset */
-	tegra_periph_reset_deassert(tegra_pcie.pcie_xclk);
-
-	/* Finally enable PCIe */
-	val = afi_readl(AFI_CONFIGURATION) | AFI_CONFIGURATION_EN_FPCI;
-	afi_writel(val, AFI_CONFIGURATION);
-
-	val = (AFI_INTR_EN_INI_SLVERR | AFI_INTR_EN_INI_DECERR |
-	       AFI_INTR_EN_TGT_SLVERR | AFI_INTR_EN_TGT_DECERR |
-	       AFI_INTR_EN_TGT_WRERR | AFI_INTR_EN_DFPCI_DECERR);
-	afi_writel(val, AFI_AFI_INTR_ENABLE);
-	afi_writel(0xffffffff, AFI_SM_INTR_ENABLE);
-
-	/* FIXME: No MSI for now, only INT */
-	afi_writel(AFI_INTR_MASK_INT_MASK, AFI_INTR_MASK);
-
-	/* Disable all execptions */
-	afi_writel(0, AFI_FPCI_ERROR_MASKS);
-
-	return 0;
-}
-
-static void tegra_pcie_power_off(void)
-{
-	tegra_periph_reset_assert(tegra_pcie.pcie_xclk);
-	tegra_periph_reset_assert(tegra_pcie.afi_clk);
-	tegra_periph_reset_assert(tegra_pcie.pex_clk);
-
-	tegra_powergate_power_off(TEGRA_POWERGATE_PCIE);
-	tegra_pmc_pcie_xclk_clamp(true);
-}
-
-static int tegra_pcie_power_regate(void)
-{
-	int err;
-
-	tegra_pcie_power_off();
-
-	tegra_pmc_pcie_xclk_clamp(true);
-
-	tegra_periph_reset_assert(tegra_pcie.pcie_xclk);
-	tegra_periph_reset_assert(tegra_pcie.afi_clk);
-
-	err = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_PCIE,
-						tegra_pcie.pex_clk);
-	if (err) {
-		pr_err("PCIE: powerup sequence failed: %d\n", err);
-		return err;
-	}
-
-	tegra_periph_reset_deassert(tegra_pcie.afi_clk);
-
-	tegra_pmc_pcie_xclk_clamp(false);
-
-	clk_prepare_enable(tegra_pcie.afi_clk);
-	clk_prepare_enable(tegra_pcie.pex_clk);
-	return clk_prepare_enable(tegra_pcie.pll_e);
-}
-
-static int tegra_pcie_clocks_get(void)
-{
-	int err;
-
-	tegra_pcie.pex_clk = clk_get(NULL, "pex");
-	if (IS_ERR(tegra_pcie.pex_clk))
-		return PTR_ERR(tegra_pcie.pex_clk);
-
-	tegra_pcie.afi_clk = clk_get(NULL, "afi");
-	if (IS_ERR(tegra_pcie.afi_clk)) {
-		err = PTR_ERR(tegra_pcie.afi_clk);
-		goto err_afi_clk;
-	}
-
-	tegra_pcie.pcie_xclk = clk_get(NULL, "pcie_xclk");
-	if (IS_ERR(tegra_pcie.pcie_xclk)) {
-		err =  PTR_ERR(tegra_pcie.pcie_xclk);
-		goto err_pcie_xclk;
-	}
-
-	tegra_pcie.pll_e = clk_get_sys(NULL, "pll_e");
-	if (IS_ERR(tegra_pcie.pll_e)) {
-		err = PTR_ERR(tegra_pcie.pll_e);
-		goto err_pll_e;
-	}
-
-	return 0;
-
-err_pll_e:
-	clk_put(tegra_pcie.pcie_xclk);
-err_pcie_xclk:
-	clk_put(tegra_pcie.afi_clk);
-err_afi_clk:
-	clk_put(tegra_pcie.pex_clk);
-
-	return err;
-}
-
-static void tegra_pcie_clocks_put(void)
-{
-	clk_put(tegra_pcie.pll_e);
-	clk_put(tegra_pcie.pcie_xclk);
-	clk_put(tegra_pcie.afi_clk);
-	clk_put(tegra_pcie.pex_clk);
-}
-
-static int __init tegra_pcie_get_resources(void)
-{
-	int err;
-
-	err = tegra_pcie_clocks_get();
-	if (err) {
-		pr_err("PCIE: failed to get clocks: %d\n", err);
-		return err;
-	}
-
-	err = tegra_pcie_power_regate();
-	if (err) {
-		pr_err("PCIE: failed to power up: %d\n", err);
-		goto err_pwr_on;
-	}
-
-	tegra_pcie.regs = ioremap_nocache(TEGRA_PCIE_BASE, PCIE_IOMAP_SZ);
-	if (tegra_pcie.regs == NULL) {
-		pr_err("PCIE: Failed to map PCI/AFI registers\n");
-		err = -ENOMEM;
-		goto err_map_reg;
-	}
-
-	err = request_irq(INT_PCIE_INTR, tegra_pcie_isr,
-			  IRQF_SHARED, "PCIE", &tegra_pcie);
-	if (err) {
-		pr_err("PCIE: Failed to register IRQ: %d\n", err);
-		goto err_req_io;
-	}
-	set_irq_flags(INT_PCIE_INTR, IRQF_VALID);
-
-	return 0;
-
-err_req_io:
-	iounmap(tegra_pcie.regs);
-err_map_reg:
-	tegra_pcie_power_off();
-err_pwr_on:
-	tegra_pcie_clocks_put();
-
-	return err;
-}
-
-/*
- * FIXME: If there are no PCIe cards attached, then calling this function
- * can result in the increase of the bootup time as there are big timeout
- * loops.
- */
-#define TEGRA_PCIE_LINKUP_TIMEOUT	200	/* up to 1.2 seconds */
-static bool tegra_pcie_check_link(struct tegra_pcie_port *pp, int idx,
-				  u32 reset_reg)
-{
-	u32 reg;
-	int retries = 3;
-	int timeout;
-
-	do {
-		timeout = TEGRA_PCIE_LINKUP_TIMEOUT;
-		while (timeout) {
-			reg = readl(pp->base + RP_VEND_XP);
-
-			if (reg & RP_VEND_XP_DL_UP)
-				break;
-
-			mdelay(1);
-			timeout--;
-		}
-
-		if (!timeout)  {
-			pr_err("PCIE: port %d: link down, retrying\n", idx);
-			goto retry;
-		}
-
-		timeout = TEGRA_PCIE_LINKUP_TIMEOUT;
-		while (timeout) {
-			reg = readl(pp->base + RP_LINK_CONTROL_STATUS);
-
-			if (reg & 0x20000000)
-				return true;
-
-			mdelay(1);
-			timeout--;
-		}
-
-retry:
-		/* Pulse the PEX reset */
-		reg = afi_readl(reset_reg) | AFI_PEX_CTRL_RST;
-		afi_writel(reg, reset_reg);
-		mdelay(1);
-		reg = afi_readl(reset_reg) & ~AFI_PEX_CTRL_RST;
-		afi_writel(reg, reset_reg);
-
-		retries--;
-	} while (retries);
-
-	return false;
-}
-
-static void __init tegra_pcie_add_port(int index, u32 offset, u32 reset_reg)
-{
-	struct tegra_pcie_port *pp;
-
-	pp = tegra_pcie.port + tegra_pcie.num_ports;
-
-	pp->index = -1;
-	pp->base = tegra_pcie.regs + offset;
-	pp->link_up = tegra_pcie_check_link(pp, index, reset_reg);
-
-	if (!pp->link_up) {
-		pp->base = NULL;
-		printk(KERN_INFO "PCIE: port %d: link down, ignoring\n", index);
-		return;
-	}
-
-	tegra_pcie.num_ports++;
-	pp->index = index;
-	pp->root_bus_nr = -1;
-	memset(pp->res, 0, sizeof(pp->res));
-}
-
-int __init tegra_pcie_init(bool init_port0, bool init_port1)
-{
-	int err;
-
-	if (!(init_port0 || init_port1))
-		return -ENODEV;
-
-	pcibios_min_mem = 0;
-
-	err = tegra_pcie_get_resources();
-	if (err)
-		return err;
-
-	err = tegra_pcie_enable_controller();
-	if (err)
-		return err;
-
-	/* setup the AFI address translations */
-	tegra_pcie_setup_translations();
-
-	if (init_port0)
-		tegra_pcie_add_port(0, RP0_OFFSET, AFI_PEX0_CTRL);
-
-	if (init_port1)
-		tegra_pcie_add_port(1, RP1_OFFSET, AFI_PEX1_CTRL);
-
-	pci_common_init(&tegra_pcie_hw);
-
-	return 0;
-}
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 6d51aa6..ac45398 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -119,3 +119,5 @@  config PCI_IOAPIC
 config PCI_LABEL
 	def_bool y if (DMI || ACPI)
 	select NLS
+
+source "drivers/pci/host/Kconfig"
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 0c3efcf..6ebf5bf 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -67,3 +67,6 @@  obj-$(CONFIG_XEN_PCIDEV_FRONTEND) += xen-pcifront.o
 obj-$(CONFIG_OF) += of.o
 
 ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG
+
+# PCI host controller drivers
+obj-y += host/
diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
new file mode 100644
index 0000000..683e105
--- /dev/null
+++ b/drivers/pci/host/Kconfig
@@ -0,0 +1,8 @@ 
+menu "PCI host controller drivers"
+	depends on PCI
+
+config PCI_TEGRA
+	bool "NVIDIA Tegra PCIe controller"
+	depends on ARCH_TEGRA_2x_SOC
+
+endmenu
diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
new file mode 100644
index 0000000..bf3adff
--- /dev/null
+++ b/drivers/pci/host/Makefile
@@ -0,0 +1 @@ 
+obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o
diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c
new file mode 100644
index 0000000..e1199fb
--- /dev/null
+++ b/drivers/pci/host/pci-tegra.c
@@ -0,0 +1,1322 @@ 
+/*
+ * PCIe host controller driver for TEGRA(2) SOCs
+ *
+ * Copyright (c) 2010, CompuLab, Ltd.
+ * Author: Mike Rapoport <mike@compulab.co.il>
+ *
+ * Based on NVIDIA PCIe driver
+ * Copyright (c) 2008-2009, NVIDIA Corporation.
+ *
+ * Bits taken from arch/arm/mach-dove/pcie.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/msi.h>
+#include <linux/of_address.h>
+#include <linux/of_pci.h>
+#include <linux/of_platform.h>
+#include <linux/regulator/consumer.h>
+
+#include <asm/sizes.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/pci.h>
+
+#include <mach/clk.h>
+#include <mach/pmc.h>
+#include <mach/powergate.h>
+
+#define INT_PCI_MSI_NR (8 * 32)
+
+/* register definitions */
+
+#define AFI_AXI_BAR0_SZ	0x00
+#define AFI_AXI_BAR1_SZ	0x04
+#define AFI_AXI_BAR2_SZ	0x08
+#define AFI_AXI_BAR3_SZ	0x0c
+#define AFI_AXI_BAR4_SZ	0x10
+#define AFI_AXI_BAR5_SZ	0x14
+
+#define AFI_AXI_BAR0_START	0x18
+#define AFI_AXI_BAR1_START	0x1c
+#define AFI_AXI_BAR2_START	0x20
+#define AFI_AXI_BAR3_START	0x24
+#define AFI_AXI_BAR4_START	0x28
+#define AFI_AXI_BAR5_START	0x2c
+
+#define AFI_FPCI_BAR0	0x30
+#define AFI_FPCI_BAR1	0x34
+#define AFI_FPCI_BAR2	0x38
+#define AFI_FPCI_BAR3	0x3c
+#define AFI_FPCI_BAR4	0x40
+#define AFI_FPCI_BAR5	0x44
+
+#define AFI_CACHE_BAR0_SZ	0x48
+#define AFI_CACHE_BAR0_ST	0x4c
+#define AFI_CACHE_BAR1_SZ	0x50
+#define AFI_CACHE_BAR1_ST	0x54
+
+#define AFI_MSI_BAR_SZ		0x60
+#define AFI_MSI_FPCI_BAR_ST	0x64
+#define AFI_MSI_AXI_BAR_ST	0x68
+
+#define AFI_MSI_VEC0		0x6c
+#define AFI_MSI_VEC1		0x70
+#define AFI_MSI_VEC2		0x74
+#define AFI_MSI_VEC3		0x78
+#define AFI_MSI_VEC4		0x7c
+#define AFI_MSI_VEC5		0x80
+#define AFI_MSI_VEC6		0x84
+#define AFI_MSI_VEC7		0x88
+
+#define AFI_MSI_EN_VEC0		0x8c
+#define AFI_MSI_EN_VEC1		0x90
+#define AFI_MSI_EN_VEC2		0x94
+#define AFI_MSI_EN_VEC3		0x98
+#define AFI_MSI_EN_VEC4		0x9c
+#define AFI_MSI_EN_VEC5		0xa0
+#define AFI_MSI_EN_VEC6		0xa4
+#define AFI_MSI_EN_VEC7		0xa8
+
+#define AFI_CONFIGURATION		0xac
+#define  AFI_CONFIGURATION_EN_FPCI	(1 << 0)
+
+#define AFI_FPCI_ERROR_MASKS	0xb0
+
+#define AFI_INTR_MASK		0xb4
+#define  AFI_INTR_MASK_INT_MASK	(1 << 0)
+#define  AFI_INTR_MASK_MSI_MASK	(1 << 8)
+
+#define AFI_INTR_CODE		0xb8
+#define  AFI_INTR_CODE_MASK	0xf
+#define  AFI_INTR_MASTER_ABORT	4
+#define  AFI_INTR_LEGACY	6
+
+#define AFI_INTR_SIGNATURE	0xbc
+#define AFI_UPPER_FPCI_ADDRESS	0xc0
+#define AFI_SM_INTR_ENABLE	0xc4
+
+#define AFI_AFI_INTR_ENABLE		0xc8
+#define  AFI_INTR_EN_INI_SLVERR		(1 << 0)
+#define  AFI_INTR_EN_INI_DECERR		(1 << 1)
+#define  AFI_INTR_EN_TGT_SLVERR		(1 << 2)
+#define  AFI_INTR_EN_TGT_DECERR		(1 << 3)
+#define  AFI_INTR_EN_TGT_WRERR		(1 << 4)
+#define  AFI_INTR_EN_DFPCI_DECERR	(1 << 5)
+#define  AFI_INTR_EN_AXI_DECERR		(1 << 6)
+#define  AFI_INTR_EN_FPCI_TIMEOUT	(1 << 7)
+
+#define AFI_PCIE_CONFIG					0x0f8
+#define  AFI_PCIE_CONFIG_PCIEC0_DISABLE_DEVICE		(1 << 1)
+#define  AFI_PCIE_CONFIG_PCIEC1_DISABLE_DEVICE		(1 << 2)
+#define  AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_MASK	(0xf << 20)
+#define  AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_SINGLE	(0x0 << 20)
+#define  AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_DUAL	(0x1 << 20)
+
+#define AFI_FUSE			0x104
+#define  AFI_FUSE_PCIE_T0_GEN2_DIS	(1 << 2)
+
+#define AFI_PEX0_CTRL			0x110
+#define AFI_PEX1_CTRL			0x118
+#define  AFI_PEX_CTRL_RST		(1 << 0)
+#define  AFI_PEX_CTRL_REFCLK_EN		(1 << 3)
+
+#define RP_VEND_XP	0x00000F00
+#define  RP_VEND_XP_DL_UP	(1 << 30)
+
+#define RP_LINK_CONTROL_STATUS			0x00000090
+#define  RP_LINK_CONTROL_STATUS_LINKSTAT_MASK	0x3fff0000
+
+#define PADS_CTL_SEL		0x0000009C
+
+#define PADS_CTL		0x000000A0
+#define  PADS_CTL_IDDQ_1L	(1 << 0)
+#define  PADS_CTL_TX_DATA_EN_1L	(1 << 6)
+#define  PADS_CTL_RX_DATA_EN_1L	(1 << 10)
+
+#define PADS_PLL_CTL				0x000000B8
+#define  PADS_PLL_CTL_RST_B4SM			(1 << 1)
+#define  PADS_PLL_CTL_LOCKDET			(1 << 8)
+#define  PADS_PLL_CTL_REFCLK_MASK		(0x3 << 16)
+#define  PADS_PLL_CTL_REFCLK_INTERNAL_CML	(0 << 16)
+#define  PADS_PLL_CTL_REFCLK_INTERNAL_CMOS	(1 << 16)
+#define  PADS_PLL_CTL_REFCLK_EXTERNAL		(2 << 16)
+#define  PADS_PLL_CTL_TXCLKREF_MASK		(0x1 << 20)
+#define  PADS_PLL_CTL_TXCLKREF_DIV10		(0 << 20)
+#define  PADS_PLL_CTL_TXCLKREF_DIV5		(1 << 20)
+
+/*
+ * The configuration space mapping on Tegra is somewhat similar to the ECAM
+ * defined by PCIe. However it deviates a bit in how the 4 bits for extended
+ * register accesses are mapped:
+ *
+ *    [27:24] extended register number
+ *    [23:16] bus number
+ *    [15:11] device number
+ *    [10: 8] function number
+ *    [ 7: 0] register number
+ */
+#define PCIE_CONF_BUS(b)	((b) << 16)
+#define PCIE_CONF_DEV(d)	((d) << 11)
+#define PCIE_CONF_FUNC(f)	((f) << 8)
+#define PCIE_CONF_REG(r)	((((r) & 0xf00) << 16) | (((r) & 0xff) & ~3))
+
+struct tegra_pcie_msi {
+	DECLARE_BITMAP(used, INT_PCI_MSI_NR);
+	struct irq_domain *domain;
+	unsigned long pages;
+	struct mutex lock;
+	int irq;
+};
+
+struct tegra_pcie {
+	struct device *dev;
+
+	void __iomem *pads;
+	void __iomem *afi;
+	int irq;
+
+	struct iomap_cache *csc;
+	struct resource *cs;
+
+	struct resource io;
+	struct resource mem;
+	struct resource prefetch;
+	struct resource busn;
+
+	struct clk *pex_clk;
+	struct clk *afi_clk;
+	struct clk *pcie_xclk;
+	struct clk *pll_e;
+
+	struct tegra_pcie_msi *msi;
+
+	struct list_head ports;
+	unsigned int num_ports;
+
+	struct regulator *pex_clk_supply;
+	struct regulator *vdd_supply;
+};
+
+struct tegra_pcie_port {
+	struct tegra_pcie *pcie;
+	struct list_head list;
+	void __iomem *base;
+	unsigned int index;
+};
+
+static inline struct tegra_pcie *sys_to_pcie(struct pci_sys_data *sys)
+{
+	return sys->private_data;
+}
+
+static inline void afi_writel(struct tegra_pcie *pcie, u32 value,
+			      unsigned long offset)
+{
+	writel(value, pcie->afi + offset);
+}
+
+static inline u32 afi_readl(struct tegra_pcie *pcie, unsigned long offset)
+{
+	return readl(pcie->afi + offset);
+}
+
+static inline void pads_writel(struct tegra_pcie *pcie, u32 value,
+			       unsigned long offset)
+{
+	writel(value, pcie->pads + offset);
+}
+
+static inline u32 pads_readl(struct tegra_pcie *pcie, unsigned long offset)
+{
+	return readl(pcie->pads + offset);
+}
+
+static int tegra_pcie_read_conf(struct pci_bus *bus, unsigned int devfn,
+				int where, int size, u32 *value)
+{
+	struct tegra_pcie *pcie = sys_to_pcie(bus->sysdata);
+	void __iomem *addr = NULL;
+	unsigned long offset;
+
+	offset = PCIE_CONF_BUS(bus->number) + PCIE_CONF_DEV(PCI_SLOT(devfn)) +
+		 PCIE_CONF_FUNC(PCI_FUNC(devfn)) + PCIE_CONF_REG(where);
+
+	if (bus->number == 0) {
+		unsigned int slot = PCI_SLOT(devfn);
+		struct tegra_pcie_port *port;
+
+		list_for_each_entry(port, &pcie->ports, list) {
+			if (port->index + 1 == slot) {
+				addr = port->base + (where & ~3);
+				break;
+			}
+		}
+	} else
+		addr = iomap_cache_map(pcie->csc, offset);
+
+	if (!addr) {
+		*value = 0xffffffff;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	*value = readl(addr);
+
+	if (size == 1)
+		*value = (*value >> (8 * (where & 3))) & 0xff;
+	else if (size == 2)
+		*value = (*value >> (8 * (where & 3))) & 0xffff;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int tegra_pcie_write_conf(struct pci_bus *bus, unsigned int devfn,
+				 int where, int size, u32 value)
+{
+	struct tegra_pcie *pcie = sys_to_pcie(bus->sysdata);
+	void __iomem *addr = NULL;
+	unsigned long offset;
+	u32 mask, tmp;
+
+	offset = PCIE_CONF_BUS(bus->number) + PCIE_CONF_DEV(PCI_SLOT(devfn)) +
+		 PCIE_CONF_FUNC(PCI_FUNC(devfn)) + PCIE_CONF_REG(where);
+
+	if (bus->number == 0) {
+		unsigned int slot = PCI_SLOT(devfn);
+		struct tegra_pcie_port *port;
+
+		list_for_each_entry(port, &pcie->ports, list) {
+			if (port->index + 1 == slot) {
+				addr = port->base + (where & ~3);
+				break;
+			}
+		}
+	} else
+		addr = iomap_cache_map(pcie->csc, offset);
+
+	if (size == 4) {
+		writel(value, addr);
+		return PCIBIOS_SUCCESSFUL;
+	}
+
+	if (size == 2)
+		mask = ~(0xffff << ((where & 0x3) * 8));
+	else if (size == 1)
+		mask = ~(0xff << ((where & 0x3) * 8));
+	else
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	tmp = readl(addr) & mask;
+	tmp |= value << ((where & 0x3) * 8);
+	writel(tmp, addr);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops tegra_pcie_ops = {
+	.read	= tegra_pcie_read_conf,
+	.write	= tegra_pcie_write_conf,
+};
+
+static void tegra_pcie_fixup_bridge(struct pci_dev *dev)
+{
+	u16 reg;
+
+	if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE) {
+		pci_read_config_word(dev, PCI_COMMAND, &reg);
+		reg |= (PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
+			PCI_COMMAND_MASTER | PCI_COMMAND_SERR);
+		pci_write_config_word(dev, PCI_COMMAND, reg);
+	}
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, tegra_pcie_fixup_bridge);
+
+/* Tegra PCIE root complex wrongly reports device class */
+static void tegra_pcie_fixup_class(struct pci_dev *dev)
+{
+	dev->class = PCI_CLASS_BRIDGE_PCI << 8;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0bf0, tegra_pcie_fixup_class);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0bf1, tegra_pcie_fixup_class);
+
+/* Tegra PCIE requires relaxed ordering */
+static void tegra_pcie_relax_enable(struct pci_dev *dev)
+{
+	pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_RELAX_EN);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, tegra_pcie_relax_enable);
+
+static int tegra_pcie_setup(int nr, struct pci_sys_data *sys)
+{
+	struct tegra_pcie *pcie = sys_to_pcie(sys);
+
+	pci_add_resource_offset(&sys->resources, &pcie->io, sys->io_offset);
+	pci_add_resource_offset(&sys->resources, &pcie->mem, sys->mem_offset);
+	pci_add_resource_offset(&sys->resources, &pcie->prefetch, sys->mem_offset);
+	pci_add_resource(&sys->resources, &pcie->busn);
+
+	pci_ioremap_io(nr * SZ_64K, pcie->io.start);
+
+	return 1;
+}
+
+static int tegra_pcie_map_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
+{
+	struct tegra_pcie *pcie = sys_to_pcie(pdev->bus->sysdata);
+
+	return pcie->irq;
+}
+
+static struct pci_bus *tegra_pcie_scan_bus(int nr, struct pci_sys_data *sys)
+{
+	struct tegra_pcie *pcie = sys_to_pcie(sys);
+	struct pci_host_bridge_window *window;
+	struct pci_bus *bus;
+	bool found = false;
+
+	list_for_each_entry(window, &sys->resources, list) {
+		if (window->res->flags & IORESOURCE_BUS) {
+			found = true;
+			break;
+		}
+	}
+
+	if (!found)
+		dev_err(pcie->dev, "no bus resource found!\n");
+
+	bus = pci_create_root_bus(pcie->dev, sys->busnr, &tegra_pcie_ops,
+				  sys, &sys->resources);
+	if (!bus)
+		return NULL;
+
+	pci_scan_child_bus(bus);
+
+	return bus;
+}
+
+static irqreturn_t tegra_pcie_isr(int irq, void *arg)
+{
+	const char *err_msg[] = {
+		"Unknown",
+		"AXI slave error",
+		"AXI decode error",
+		"Target abort",
+		"Master abort",
+		"Invalid write",
+		"Response decoding error",
+		"AXI response decoding error",
+		"Transaction timeout",
+	};
+	struct tegra_pcie *pcie = arg;
+	u32 code, signature;
+
+	code = afi_readl(pcie, AFI_INTR_CODE) & AFI_INTR_CODE_MASK;
+	signature = afi_readl(pcie, AFI_INTR_SIGNATURE);
+	afi_writel(pcie, 0, AFI_INTR_CODE);
+
+	if (code == AFI_INTR_LEGACY)
+		return IRQ_NONE;
+
+	if (code >= ARRAY_SIZE(err_msg))
+		code = 0;
+
+	/*
+	 * do not pollute kernel log with master abort reports since they
+	 * happen a lot during enumeration
+	 */
+	if (code == AFI_INTR_MASTER_ABORT) {
+		dev_dbg(pcie->dev, "%s, signature: %08x\n", err_msg[code],
+			signature);
+	} else
+		dev_err(pcie->dev, "%s, signature: %08x\n", err_msg[code],
+			signature);
+
+	if (code == 3 || code == 4 || code == 7) {
+		u32 fpci = afi_readl(pcie, AFI_UPPER_FPCI_ADDRESS) & 0xff;
+		u64 address = (u64)fpci << 32 | (signature & 0xfffffffc);
+		dev_dbg(pcie->dev, "  FPCI address: %10llx\n", address);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * FPCI map is as follows:
+ * - 0xfdfc000000: I/O space
+ * - 0xfdfe000000: type 0 configuration space
+ * - 0xfdff000000: type 1 configuration space
+ * - 0xfe00000000: type 0 extended configuration space
+ * - 0xfe10000000: type 1 extended configuration space
+ */
+static void tegra_pcie_setup_translations(struct tegra_pcie *pcie)
+{
+	u32 fpci_bar, size, axi_address;
+
+	/* Bar 0: type 1 extended configuration space */
+	fpci_bar = 0xfe100000;
+	size = resource_size(pcie->cs);
+	axi_address = pcie->cs->start;
+	afi_writel(pcie, axi_address, AFI_AXI_BAR0_START);
+	afi_writel(pcie, size >> 12, AFI_AXI_BAR0_SZ);
+	afi_writel(pcie, fpci_bar, AFI_FPCI_BAR0);
+
+	/* Bar 1: downstream IO bar */
+	fpci_bar = 0xfdfc0000;
+	size = resource_size(&pcie->io);
+	axi_address = pcie->io.start;
+	afi_writel(pcie, axi_address, AFI_AXI_BAR1_START);
+	afi_writel(pcie, size >> 12, AFI_AXI_BAR1_SZ);
+	afi_writel(pcie, fpci_bar, AFI_FPCI_BAR1);
+
+	/* Bar 2: prefetchable memory BAR */
+	fpci_bar = (((pcie->prefetch.start >> 12) & 0x0fffffff) << 4) | 0x1;
+	size = resource_size(&pcie->prefetch);
+	axi_address = pcie->prefetch.start;
+	afi_writel(pcie, axi_address, AFI_AXI_BAR2_START);
+	afi_writel(pcie, size >> 12, AFI_AXI_BAR2_SZ);
+	afi_writel(pcie, fpci_bar, AFI_FPCI_BAR2);
+
+	/* Bar 3: non prefetchable memory BAR */
+	fpci_bar = (((pcie->mem.start >> 12) & 0x0fffffff) << 4) | 0x1;
+	size = resource_size(&pcie->mem);
+	axi_address = pcie->mem.start;
+	afi_writel(pcie, axi_address, AFI_AXI_BAR3_START);
+	afi_writel(pcie, size >> 12, AFI_AXI_BAR3_SZ);
+	afi_writel(pcie, fpci_bar, AFI_FPCI_BAR3);
+
+	/* NULL out the remaining BARs as they are not used */
+	afi_writel(pcie, 0, AFI_AXI_BAR4_START);
+	afi_writel(pcie, 0, AFI_AXI_BAR4_SZ);
+	afi_writel(pcie, 0, AFI_FPCI_BAR4);
+
+	afi_writel(pcie, 0, AFI_AXI_BAR5_START);
+	afi_writel(pcie, 0, AFI_AXI_BAR5_SZ);
+	afi_writel(pcie, 0, AFI_FPCI_BAR5);
+
+	/* map all upstream transactions as uncached */
+	afi_writel(pcie, PHYS_OFFSET, AFI_CACHE_BAR0_ST);
+	afi_writel(pcie, 0, AFI_CACHE_BAR0_SZ);
+	afi_writel(pcie, 0, AFI_CACHE_BAR1_ST);
+	afi_writel(pcie, 0, AFI_CACHE_BAR1_SZ);
+
+	/* MSI translations are setup only when needed */
+	afi_writel(pcie, 0, AFI_MSI_FPCI_BAR_ST);
+	afi_writel(pcie, 0, AFI_MSI_BAR_SZ);
+	afi_writel(pcie, 0, AFI_MSI_AXI_BAR_ST);
+	afi_writel(pcie, 0, AFI_MSI_BAR_SZ);
+}
+
+static int tegra_pcie_enable_controller(struct tegra_pcie *pcie)
+{
+	unsigned int timeout;
+	unsigned long value;
+
+	/* enable dual controller and both ports */
+	value = afi_readl(pcie, AFI_PCIE_CONFIG);
+	value &= ~(AFI_PCIE_CONFIG_PCIEC0_DISABLE_DEVICE |
+		   AFI_PCIE_CONFIG_PCIEC1_DISABLE_DEVICE |
+		   AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_MASK);
+	value |= AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_DUAL;
+	afi_writel(pcie, value, AFI_PCIE_CONFIG);
+
+	value = afi_readl(pcie, AFI_FUSE);
+	value &= ~AFI_FUSE_PCIE_T0_GEN2_DIS;
+	afi_writel(pcie, value, AFI_FUSE);
+
+	/* initialze internal PHY, enable up to 16 PCIE lanes */
+	pads_writel(pcie, 0x0, PADS_CTL_SEL);
+
+	/* override IDDQ to 1 on all 4 lanes */
+	value = pads_readl(pcie, PADS_CTL);
+	value |= PADS_CTL_IDDQ_1L;
+	pads_writel(pcie, value, PADS_CTL);
+
+	/*
+	 * Set up PHY PLL inputs select PLLE output as refclock,
+	 * set TX ref sel to div10 (not div5).
+	 */
+	value = pads_readl(pcie, PADS_PLL_CTL);
+	value &= ~(PADS_PLL_CTL_REFCLK_MASK | PADS_PLL_CTL_TXCLKREF_MASK);
+	value |= (PADS_PLL_CTL_REFCLK_INTERNAL_CML | PADS_PLL_CTL_TXCLKREF_DIV10);
+	pads_writel(pcie, value, PADS_PLL_CTL);
+
+	/* take PLL out of reset  */
+	value = pads_readl(pcie, PADS_PLL_CTL);
+	value |= PADS_PLL_CTL_RST_B4SM;
+	pads_writel(pcie, value, PADS_PLL_CTL);
+
+	/*
+	 * Hack, set the clock voltage to the DEFAULT provided by hw folks.
+	 * This doesn't exist in the documentation.
+	 */
+	pads_writel(pcie, 0xfa5cfa5c, 0xc8);
+
+	/* wait for the PLL to lock */
+	timeout = 300;
+	do {
+		value = pads_readl(pcie, PADS_PLL_CTL);
+		usleep_range(1000, 1000);
+		if (--timeout == 0) {
+			pr_err("Tegra PCIe error: timeout waiting for PLL\n");
+			return -EBUSY;
+		}
+	} while (!(value & PADS_PLL_CTL_LOCKDET));
+
+	/* turn off IDDQ override */
+	value = pads_readl(pcie, PADS_CTL);
+	value &= ~PADS_CTL_IDDQ_1L;
+	pads_writel(pcie, value, PADS_CTL);
+
+	/* enable TX/RX data */
+	value = pads_readl(pcie, PADS_CTL);
+	value |= PADS_CTL_TX_DATA_EN_1L | PADS_CTL_RX_DATA_EN_1L;
+	pads_writel(pcie, value, PADS_CTL);
+
+	/* take the PCIe interface module out of reset */
+	tegra_periph_reset_deassert(pcie->pcie_xclk);
+
+	/* finally enable PCIe */
+	value = afi_readl(pcie, AFI_CONFIGURATION);
+	value |= AFI_CONFIGURATION_EN_FPCI;
+	afi_writel(pcie, value, AFI_CONFIGURATION);
+
+	value = AFI_INTR_EN_INI_SLVERR | AFI_INTR_EN_INI_DECERR |
+		AFI_INTR_EN_TGT_SLVERR | AFI_INTR_EN_TGT_DECERR |
+		AFI_INTR_EN_TGT_WRERR | AFI_INTR_EN_DFPCI_DECERR;
+	afi_writel(pcie, value, AFI_AFI_INTR_ENABLE);
+	afi_writel(pcie, 0xffffffff, AFI_SM_INTR_ENABLE);
+
+	/* don't enable MSI for now, only when needed */
+	afi_writel(pcie, AFI_INTR_MASK_INT_MASK, AFI_INTR_MASK);
+
+	/* disable all exceptions */
+	afi_writel(pcie, 0, AFI_FPCI_ERROR_MASKS);
+
+	return 0;
+}
+
+static void tegra_pcie_power_off(struct tegra_pcie *pcie)
+{
+	int err;
+
+	/* TODO: disable and unprepare clocks? */
+
+	tegra_periph_reset_assert(pcie->pcie_xclk);
+	tegra_periph_reset_assert(pcie->afi_clk);
+	tegra_periph_reset_assert(pcie->pex_clk);
+
+	tegra_powergate_power_off(TEGRA_POWERGATE_PCIE);
+	tegra_pmc_pcie_xclk_clamp(true);
+
+	if (!IS_ERR_OR_NULL(pcie->pex_clk_supply)) {
+		err = regulator_disable(pcie->pex_clk_supply);
+		if (err < 0) {
+			dev_err(pcie->dev,
+				"failed to disable pex-clk regulator: %d\n",
+				err);
+		}
+	}
+
+	if (!IS_ERR_OR_NULL(pcie->vdd_supply)) {
+		err = regulator_disable(pcie->vdd_supply);
+		if (err < 0) {
+			dev_err(pcie->dev,
+				"failed to disable VDD regulator: %d\n", err);
+		}
+	}
+}
+
+static int tegra_pcie_power_on(struct tegra_pcie *pcie)
+{
+	int err;
+
+	tegra_periph_reset_assert(pcie->pcie_xclk);
+	tegra_periph_reset_assert(pcie->afi_clk);
+	tegra_periph_reset_assert(pcie->pex_clk);
+
+	tegra_powergate_power_off(TEGRA_POWERGATE_PCIE);
+	tegra_pmc_pcie_xclk_clamp(true);
+
+	/* enable regulators */
+	if (!IS_ERR_OR_NULL(pcie->vdd_supply)) {
+		err = regulator_enable(pcie->vdd_supply);
+		if (err < 0) {
+			dev_err(pcie->dev,
+				"failed to enable VDD regulator: %d\n", err);
+			return err;
+		}
+	}
+
+	if (!IS_ERR_OR_NULL(pcie->pex_clk_supply)) {
+		err = regulator_enable(pcie->pex_clk_supply);
+		if (err < 0) {
+			dev_err(pcie->dev,
+				"failed to enable pex-clk regulator: %d\n",
+				err);
+			return err;
+		}
+	}
+
+	err = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_PCIE,
+						pcie->pex_clk);
+	if (err) {
+		dev_err(pcie->dev, "powerup sequence failed: %d\n", err);
+		return err;
+	}
+
+	tegra_periph_reset_deassert(pcie->afi_clk);
+
+	tegra_pmc_pcie_xclk_clamp(false);
+
+	clk_prepare_enable(pcie->afi_clk);
+	return clk_prepare_enable(pcie->pll_e);
+}
+
+static int tegra_pcie_clocks_get(struct tegra_pcie *pcie)
+{
+	pcie->pex_clk = devm_clk_get(pcie->dev, "pex");
+	if (IS_ERR(pcie->pex_clk))
+		return PTR_ERR(pcie->pex_clk);
+
+	pcie->afi_clk = devm_clk_get(pcie->dev, "afi");
+	if (IS_ERR(pcie->afi_clk))
+		return PTR_ERR(pcie->afi_clk);
+
+	pcie->pcie_xclk = devm_clk_get(pcie->dev, "pcie_xclk");
+	if (IS_ERR(pcie->pcie_xclk))
+		return PTR_ERR(pcie->pcie_xclk);
+
+	pcie->pll_e = devm_clk_get(pcie->dev, "pll_e");
+	if (IS_ERR(pcie->pll_e))
+		return PTR_ERR(pcie->pll_e);
+
+	return 0;
+}
+
+static int tegra_pcie_get_resources(struct tegra_pcie *pcie)
+{
+	struct platform_device *pdev = to_platform_device(pcie->dev);
+	struct resource *pads, *afi, *res;
+	int err;
+
+	err = tegra_pcie_clocks_get(pcie);
+	if (err) {
+		dev_err(&pdev->dev, "failed to get clocks: %d\n", err);
+		return err;
+	}
+
+	err = tegra_pcie_power_on(pcie);
+	if (err) {
+		dev_err(&pdev->dev, "failed to power up: %d\n", err);
+		return err;
+	}
+
+	/* request and remap controller registers */
+	pads = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pads");
+	if (!pads) {
+		err = -EADDRNOTAVAIL;
+		goto poweroff;
+	}
+
+	afi = platform_get_resource_byname(pdev, IORESOURCE_MEM, "afi");
+	if (!afi) {
+		err = -EADDRNOTAVAIL;
+		goto poweroff;
+	}
+
+	pcie->pads = devm_request_and_ioremap(&pdev->dev, pads);
+	if (!pcie->pads) {
+		err = -EADDRNOTAVAIL;
+		goto poweroff;
+	}
+
+	pcie->afi = devm_request_and_ioremap(&pdev->dev, afi);
+	if (!pcie->afi) {
+		err = -EADDRNOTAVAIL;
+		goto poweroff;
+	}
+
+	/* request and remap configuration space */
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cs");
+	if (!res) {
+		err = -EADDRNOTAVAIL;
+		goto poweroff;
+	}
+
+	pcie->cs = devm_request_mem_region(pcie->dev, res->start,
+					   resource_size(res), res->name);
+	if (!pcie->cs) {
+		err = -EADDRNOTAVAIL;
+		goto poweroff;
+	}
+
+	pcie->csc = devm_iomap_cache_create(pcie->dev, pcie->cs);
+	if (!pcie->csc) {
+		err = -ENOMEM;
+		goto poweroff;
+	}
+
+	/* request interrupt */
+	err = platform_get_irq_byname(pdev, "intr");
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to get IRQ: %d\n", err);
+		goto poweroff;
+	}
+
+	pcie->irq = err;
+
+	err = devm_request_irq(&pdev->dev, pcie->irq, tegra_pcie_isr,
+			       IRQF_SHARED, "PCIE", pcie);
+	if (err) {
+		dev_err(&pdev->dev, "failed to register IRQ: %d\n", err);
+		goto poweroff;
+	}
+
+	return 0;
+
+poweroff:
+	tegra_pcie_power_off(pcie);
+	return err;
+}
+
+static int tegra_pcie_put_resources(struct tegra_pcie *pcie)
+{
+	tegra_pcie_power_off(pcie);
+	return 0;
+}
+
+static int tegra_pcie_msi_alloc(struct tegra_pcie *pcie)
+{
+	int msi;
+
+	mutex_lock(&pcie->msi->lock);
+
+	msi = find_first_zero_bit(pcie->msi->used, INT_PCI_MSI_NR);
+	if (msi < INT_PCI_MSI_NR)
+		set_bit(msi, pcie->msi->used);
+	else
+		msi = -ENOSPC;
+
+	mutex_unlock(&pcie->msi->lock);
+
+	return msi;
+}
+
+static void tegra_pcie_msi_free(struct tegra_pcie *pcie, unsigned long irq)
+{
+	mutex_lock(&pcie->msi->lock);
+
+	if (!test_bit(irq, pcie->msi->used))
+		dev_err(pcie->dev, "trying to free unused MSI#%lu\n", irq);
+	else
+		clear_bit(irq, pcie->msi->used);
+
+	mutex_unlock(&pcie->msi->lock);
+}
+
+static irqreturn_t tegra_pcie_msi_irq(int irq, void *data)
+{
+	struct tegra_pcie *pcie = data;
+	unsigned int i;
+
+	for (i = 0; i < 8; i++) {
+		unsigned long reg = afi_readl(pcie, AFI_MSI_VEC0 + i * 4);
+
+		while (reg) {
+			unsigned int offset = find_first_bit(&reg, 32);
+			unsigned int index = i * 32 + offset;
+			unsigned int irq;
+
+			/* clear the interrupt */
+			afi_writel(pcie, 1 << offset, AFI_MSI_VEC0 + i * 4);
+
+			irq = irq_find_mapping(pcie->msi->domain, index);
+			if (irq) {
+				if (test_bit(index, pcie->msi->used))
+					generic_handle_irq(irq);
+				else
+					dev_info(pcie->dev, "unhandled MSI\n");
+			} else {
+				/*
+				 * that's weird who triggered this?
+				 * just clear it
+				 */
+				dev_info(pcie->dev, "unexpected MSI\n");
+			}
+
+			/* see if there's any more pending in this vector */
+			reg = afi_readl(pcie, AFI_MSI_VEC0 + i * 4);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+/* called by arch_setup_msi_irqs in drivers/pci/msi.c */
+int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
+{
+	struct tegra_pcie *pcie = sys_to_pcie(pdev->bus->sysdata);
+	struct msi_msg msg;
+	unsigned int irq;
+	int hwirq;
+
+	hwirq = tegra_pcie_msi_alloc(pcie);
+	if (hwirq < 0)
+		return hwirq;
+
+	irq = irq_create_mapping(pcie->msi->domain, hwirq);
+	if (!irq)
+		return -EINVAL;
+
+	irq_set_msi_desc(irq, desc);
+
+	msg.address_lo = afi_readl(pcie, AFI_MSI_AXI_BAR_ST);
+	/* 32 bit address only */
+	msg.address_hi = 0;
+	msg.data = hwirq;
+
+	write_msi_msg(irq, &msg);
+
+	return 0;
+}
+
+void arch_teardown_msi_irq(unsigned int irq)
+{
+	struct tegra_pcie *pcie = irq_get_chip_data(irq);
+	struct irq_data *d = irq_get_irq_data(irq);
+
+	tegra_pcie_msi_free(pcie, d->hwirq);
+}
+
+static struct irq_chip tegra_pcie_msi_irq_chip = {
+	.name = "Tegra PCIe MSI",
+	.irq_enable = unmask_msi_irq,
+	.irq_disable = mask_msi_irq,
+	.irq_mask = mask_msi_irq,
+	.irq_unmask = unmask_msi_irq,
+};
+
+static int tegra_pcie_msi_map(struct irq_domain *domain, unsigned int irq,
+			      irq_hw_number_t hwirq)
+{
+	irq_set_chip_and_handler(irq, &tegra_pcie_msi_irq_chip,
+				 handle_simple_irq);
+	irq_set_chip_data(irq, domain->host_data);
+	set_irq_flags(irq, IRQF_VALID);
+
+	return 0;
+}
+
+static const struct irq_domain_ops msi_domain_ops = {
+	.map = tegra_pcie_msi_map,
+};
+
+static int tegra_pcie_enable_msi(struct tegra_pcie *pcie)
+{
+	struct platform_device *pdev = to_platform_device(pcie->dev);
+	unsigned long base;
+	int err;
+	u32 reg;
+
+	pcie->msi = devm_kzalloc(&pdev->dev, sizeof(*pcie->msi), GFP_KERNEL);
+	if (!pcie->msi)
+		return -ENOMEM;
+
+	mutex_init(&pcie->msi->lock);
+
+	pcie->msi->domain = irq_domain_add_linear(pcie->dev->of_node,
+						  INT_PCI_MSI_NR,
+						  &msi_domain_ops, pcie);
+	if (!pcie->msi->domain) {
+		dev_err(&pdev->dev, "failed to create IRQ domain\n");
+		return -ENOMEM;
+	}
+
+	err = platform_get_irq_byname(pdev, "msi");
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to get IRQ: %d\n", err);
+		goto err;
+	}
+
+	pcie->msi->irq = err;
+
+	err = devm_request_irq(&pdev->dev, pcie->msi->irq, tegra_pcie_msi_irq,
+			       0, tegra_pcie_msi_irq_chip.name, pcie);
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to request IRQ: %d\n", err);
+		goto err;
+	}
+
+	/* setup AFI/FPCI range */
+	pcie->msi->pages = __get_free_pages(GFP_KERNEL, 3);
+	base = virt_to_phys((void *)pcie->msi->pages);
+
+	afi_writel(pcie, base, AFI_MSI_FPCI_BAR_ST);
+	afi_writel(pcie, base, AFI_MSI_AXI_BAR_ST);
+	/* this register is in 4K increments */
+	afi_writel(pcie, 1, AFI_MSI_BAR_SZ);
+
+	/* enable all MSI vectors */
+	afi_writel(pcie, 0xffffffff, AFI_MSI_EN_VEC0);
+	afi_writel(pcie, 0xffffffff, AFI_MSI_EN_VEC1);
+	afi_writel(pcie, 0xffffffff, AFI_MSI_EN_VEC2);
+	afi_writel(pcie, 0xffffffff, AFI_MSI_EN_VEC3);
+	afi_writel(pcie, 0xffffffff, AFI_MSI_EN_VEC4);
+	afi_writel(pcie, 0xffffffff, AFI_MSI_EN_VEC5);
+	afi_writel(pcie, 0xffffffff, AFI_MSI_EN_VEC6);
+	afi_writel(pcie, 0xffffffff, AFI_MSI_EN_VEC7);
+
+	/* and unmask the MSI interrupt */
+	reg = afi_readl(pcie, AFI_INTR_MASK);
+	reg |= AFI_INTR_MASK_MSI_MASK;
+	afi_writel(pcie, reg, AFI_INTR_MASK);
+
+	return 0;
+
+err:
+	irq_domain_remove(pcie->msi->domain);
+	return err;
+}
+
+static int tegra_pcie_disable_msi(struct tegra_pcie *pcie)
+{
+	unsigned int i, irq;
+	u32 value;
+
+	/* mask the MSI interrupt */
+	value = afi_readl(pcie, AFI_INTR_MASK);
+	value &= ~AFI_INTR_MASK_MSI_MASK;
+	afi_writel(pcie, value, AFI_INTR_MASK);
+
+	/* disable all MSI vectors */
+	afi_writel(pcie, 0, AFI_MSI_EN_VEC0);
+	afi_writel(pcie, 0, AFI_MSI_EN_VEC1);
+	afi_writel(pcie, 0, AFI_MSI_EN_VEC2);
+	afi_writel(pcie, 0, AFI_MSI_EN_VEC3);
+	afi_writel(pcie, 0, AFI_MSI_EN_VEC4);
+	afi_writel(pcie, 0, AFI_MSI_EN_VEC5);
+	afi_writel(pcie, 0, AFI_MSI_EN_VEC6);
+	afi_writel(pcie, 0, AFI_MSI_EN_VEC7);
+
+	free_pages(pcie->msi->pages, 3);
+
+	for (i = 0; i < INT_PCI_MSI_NR; i++) {
+		irq = irq_find_mapping(pcie->msi->domain, i);
+		if (irq > 0)
+			irq_dispose_mapping(irq);
+	}
+
+	irq_domain_remove(pcie->msi->domain);
+
+	return 0;
+}
+
+static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
+{
+	struct device_node *np = pcie->dev->of_node;
+	const __be32 *range = NULL;
+	struct resource res;
+	int err;
+
+	pcie->vdd_supply = devm_regulator_get(pcie->dev, "vdd");
+	if (IS_ERR(pcie->vdd_supply))
+		return PTR_ERR(pcie->vdd_supply);
+
+	pcie->pex_clk_supply = devm_regulator_get(pcie->dev, "pex-clk");
+	if (IS_ERR(pcie->pex_clk_supply))
+		return PTR_ERR(pcie->pex_clk_supply);
+
+	while ((range = of_pci_process_ranges(np, &res, range)) != NULL) {
+		switch (res.flags & IORESOURCE_TYPE_BITS) {
+		case IORESOURCE_IO:
+			memcpy(&pcie->io, &res, sizeof(res));
+			pcie->io.name = "I/O";
+			break;
+
+		case IORESOURCE_MEM:
+			if (res.flags & IORESOURCE_PREFETCH) {
+				memcpy(&pcie->prefetch, &res, sizeof(res));
+				pcie->prefetch.name = "PREFETCH";
+			} else {
+				memcpy(&pcie->mem, &res, sizeof(res));
+				pcie->mem.name = "MEM";
+			}
+			break;
+		}
+	}
+
+	err = of_pci_parse_bus_range(np, &pcie->busn);
+	if (err < 0) {
+		dev_err(pcie->dev, "failed to parse ranges property: %d\n",
+			err);
+		pcie->busn.name = np->name;
+		pcie->busn.start = 0;
+		pcie->busn.end = 0xff;
+		pcie->busn.flags = IORESOURCE_BUS;
+	}
+
+	return 0;
+}
+
+static unsigned long tegra_pcie_port_get_pex_ctrl(struct tegra_pcie_port *port)
+{
+	unsigned long ret = 0;
+
+	switch (port->index) {
+	case 0:
+		ret = AFI_PEX0_CTRL;
+		break;
+
+	case 1:
+		ret = AFI_PEX1_CTRL;
+		break;
+	}
+
+	return ret;
+}
+
+/*
+ * FIXME: If there are no PCIe cards attached, then calling this function
+ * can result in the increase of the bootup time as there are big timeout
+ * loops.
+ */
+#define TEGRA_PCIE_LINKUP_TIMEOUT	200	/* up to 1.2 seconds */
+static bool tegra_pcie_port_check_link(struct tegra_pcie_port *port)
+{
+	unsigned long value, ctrl = tegra_pcie_port_get_pex_ctrl(port);
+	unsigned int retries = 3;
+
+	/* enable reference clock */
+	value = afi_readl(port->pcie, ctrl);
+	value |= AFI_PEX_CTRL_REFCLK_EN;
+	afi_writel(port->pcie, value, ctrl);
+
+	do {
+		unsigned int timeout = TEGRA_PCIE_LINKUP_TIMEOUT;
+
+		do {
+			value = readl(port->base + RP_VEND_XP);
+
+			if (value & RP_VEND_XP_DL_UP)
+				break;
+
+			usleep_range(1000, 1000);
+		} while (--timeout);
+
+		if (!timeout) {
+			dev_err(port->pcie->dev, "link %u down, retrying\n",
+				port->index);
+			goto retry;
+		}
+
+		timeout = TEGRA_PCIE_LINKUP_TIMEOUT;
+
+		do {
+			value = readl(port->base + RP_LINK_CONTROL_STATUS);
+
+			if (value & 0x20000000)
+				return true;
+
+			usleep_range(1000, 1000);
+		} while (--timeout);
+
+retry:
+		/* Pulse the PEX reset */
+		value = afi_readl(port->pcie, ctrl);
+		value |= AFI_PEX_CTRL_RST;
+		afi_writel(port->pcie, value, ctrl);
+
+		usleep_range(1000, 1000);
+
+		value = afi_readl(port->pcie, ctrl);
+		value &= ~AFI_PEX_CTRL_RST;
+		afi_writel(port->pcie, value, ctrl);
+	} while (--retries);
+
+	return false;
+}
+
+static int tegra_pcie_enable(struct tegra_pcie *pcie)
+{
+	struct hw_pci hw;
+
+	memset(&hw, 0, sizeof(hw));
+
+	hw.nr_controllers = 1;
+	hw.private_data = (void **)&pcie;
+	hw.setup = tegra_pcie_setup;
+	hw.scan = tegra_pcie_scan_bus;
+	hw.map_irq = tegra_pcie_map_irq;
+
+	pci_common_init(&hw);
+
+	return 0;
+}
+
+static int tegra_pcie_add_port(struct tegra_pcie *pcie, struct device_node *np)
+{
+	struct tegra_pcie_port *port;
+	struct resource regs;
+	unsigned int index;
+	int err;
+
+	err = of_address_to_resource(np, 0, &regs);
+	if (err < 0) {
+		dev_dbg(pcie->dev, "of_address_to_resource(): %d\n", err);
+		return err;
+	}
+
+	err = of_pci_get_devfn(np);
+	if (err < 0)
+		return err;
+
+	index = PCI_SLOT(err) - 1;
+
+	port = devm_kzalloc(pcie->dev, sizeof(*port), GFP_KERNEL);
+	if (!port)
+		return -ENOMEM;
+
+	INIT_LIST_HEAD(&port->list);
+	port->index = index;
+	port->pcie = pcie;
+
+	port->base = devm_request_and_ioremap(pcie->dev, &regs);
+	if (!port->base)
+		return -EADDRNOTAVAIL;
+
+	if (!tegra_pcie_port_check_link(port)) {
+		dev_info(pcie->dev, "link %u down, ignoring\n", port->index);
+		return -ENODEV;
+	}
+
+	list_add_tail(&port->list, &pcie->ports);
+
+	return 0;
+}
+
+static int tegra_pcie_probe(struct platform_device *pdev)
+{
+	struct device_node *port;
+	struct tegra_pcie *pcie;
+	int err;
+
+	pcie = devm_kzalloc(&pdev->dev, sizeof(*pcie), GFP_KERNEL);
+	if (!pcie)
+		return -ENOMEM;
+
+	INIT_LIST_HEAD(&pcie->ports);
+	pcie->dev = &pdev->dev;
+
+	err = tegra_pcie_parse_dt(pcie);
+	if (err < 0)
+		return err;
+
+	pcibios_min_mem = 0;
+
+	err = tegra_pcie_get_resources(pcie);
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to request resources: %d\n", err);
+		return err;
+	}
+
+	err = tegra_pcie_enable_controller(pcie);
+	if (err)
+		goto put_resources;
+
+	/* probe root ports */
+	for_each_child_of_node(pdev->dev.of_node, port) {
+		if (!of_device_is_available(port))
+			continue;
+
+		err = tegra_pcie_add_port(pcie, port);
+		if (err < 0) {
+			dev_err(&pdev->dev, "failed to add port %s: %d\n",
+				port->name, err);
+		}
+	}
+
+	/* setup the AFI address translations */
+	tegra_pcie_setup_translations(pcie);
+
+	if (IS_ENABLED(CONFIG_PCI_MSI)) {
+		err = tegra_pcie_enable_msi(pcie);
+		if (err < 0) {
+			dev_err(&pdev->dev,
+				"failed to enable MSI support: %d\n",
+				err);
+			goto put_resources;
+		}
+	}
+
+	err = tegra_pcie_enable(pcie);
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to enable PCIe ports: %d\n", err);
+		goto disable_msi;
+	}
+
+	platform_set_drvdata(pdev, pcie);
+	return 0;
+
+disable_msi:
+	if (IS_ENABLED(CONFIG_PCI_MSI))
+		tegra_pcie_disable_msi(pcie);
+put_resources:
+	tegra_pcie_put_resources(pcie);
+	return err;
+}
+
+static int tegra_pcie_remove(struct platform_device *pdev)
+{
+	struct tegra_pcie *pcie = platform_get_drvdata(pdev);
+	int err;
+
+	if (IS_ENABLED(CONFIG_PCI_MSI)) {
+		err = tegra_pcie_disable_msi(pcie);
+		if (err < 0)
+			return err;
+	}
+
+	err = tegra_pcie_put_resources(pcie);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static const struct of_device_id tegra_pcie_of_match[] = {
+	{ .compatible = "nvidia,tegra20-pcie", },
+	{ },
+};
+
+static struct platform_driver tegra_pcie_driver = {
+	.driver = {
+		.name = "tegra-pcie",
+		.owner = THIS_MODULE,
+		.of_match_table = tegra_pcie_of_match,
+	},
+	.probe = tegra_pcie_probe,
+	.remove = tegra_pcie_remove,
+};
+module_platform_driver(tegra_pcie_driver);