@@ -1591,7 +1591,7 @@ static int ata_eh_read_log_10h(struct ata_device *dev,
* RETURNS:
* 0 on success, AC_ERR_* mask on failure.
*/
-static unsigned int atapi_eh_tur(struct ata_device *dev, u8 *r_sense_key)
+unsigned int atapi_eh_tur(struct ata_device *dev, u8 *r_sense_key)
{
u8 cdb[ATAPI_CDB_LEN] = { TEST_UNIT_READY, 0, 0, 0, 0, 0 };
struct ata_taskfile tf;
@@ -1624,7 +1624,7 @@ static unsigned int atapi_eh_tur(struct ata_device *dev, u8 *r_sense_key)
* RETURNS:
* 0 on success, AC_ERR_* mask on failure
*/
-static unsigned int atapi_eh_request_sense(struct ata_device *dev,
+unsigned int atapi_eh_request_sense(struct ata_device *dev,
u8 *sense_buf, u8 dfl_sense_key)
{
u8 cdb[ATAPI_CDB_LEN] =
@@ -4022,6 +4022,7 @@ static void ata_eh_handle_port_suspend(struct ata_port *ap)
{
unsigned long flags;
int rc = 0;
+ struct ata_device *dev;
/* are we suspending? */
spin_lock_irqsave(ap->lock, flags);
@@ -4034,6 +4035,11 @@ static void ata_eh_handle_port_suspend(struct ata_port *ap)
WARN_ON(ap->pflags & ATA_PFLAG_SUSPENDED);
+ ata_for_each_dev(dev, &ap->link, ENABLED) {
+ if (zpodd_dev_enabled(dev))
+ zpodd_on_suspend(dev);
+ }
+
/* tell ACPI we're suspending */
rc = ata_acpi_on_suspend(ap);
if (rc)
@@ -1,16 +1,24 @@
#include <linux/libata.h>
#include <linux/cdrom.h>
#include <linux/pm_runtime.h>
+#include <linux/module.h>
#include <scsi/scsi_device.h>
#include "libata.h"
+static int zpodd_poweroff_delay = 30; /* 30 seconds for power off delay */
+module_param(zpodd_poweroff_delay, int, 0644);
+MODULE_PARM_DESC(zpodd_poweroff_delay, "Poweroff delay for ZPODD in seconds");
+
struct zpodd {
bool slot:1;
bool drawer:1;
/* The following bits are synchronized by PM core */
bool from_notify:1; /* resumed as a result of acpi notification */
+ bool zp_ready:1; /* zero power ready state */
+
+ unsigned long last_ready; /* last zero power ready timestamp */
struct ata_device *dev;
};
@@ -85,6 +93,68 @@ static bool odd_can_poweroff(struct ata_device *ata_dev)
return acpi_device_can_poweroff(acpi_dev);
}
+/* Test if ODD is zero power ready by sense code */
+static bool zpready(struct ata_device *dev)
+{
+ u8 sense_key, *sense_buf;
+ unsigned int ret, asc, ascq, add_len;
+ struct zpodd *zpodd = dev->zpodd;
+
+ ret = atapi_eh_tur(dev, &sense_key);
+
+ if (!ret || sense_key != NOT_READY)
+ return false;
+
+ sense_buf = dev->link->ap->sector_buf;
+ ret = atapi_eh_request_sense(dev, sense_buf, sense_key);
+ if (ret)
+ return false;
+
+ /* sense valid */
+ if ((sense_buf[0] & 0x7f) != 0x70)
+ return false;
+
+ add_len = sense_buf[7];
+ /* has asc and ascq */
+ if (add_len < 6)
+ return false;
+
+ asc = sense_buf[12];
+ ascq = sense_buf[13];
+
+ if (zpodd->slot)
+ /* no media inside */
+ return asc == 0x3a;
+ else
+ /* no media inside and door closed */
+ return asc == 0x3a && ascq == 0x01;
+}
+
+/* Check zero power ready status */
+void zpodd_on_suspend(struct ata_device *dev)
+{
+ struct zpodd *zpodd = dev->zpodd;
+ unsigned long expires;
+
+ if (!zpready(dev)) {
+ zpodd->zp_ready = false;
+ zpodd->last_ready = 0;
+ return;
+ }
+
+ if (!zpodd->last_ready) {
+ zpodd->last_ready = jiffies;
+ return;
+ }
+
+ expires = zpodd->last_ready +
+ msecs_to_jiffies(zpodd_poweroff_delay * 1000);
+ if (time_before(jiffies, expires))
+ return;
+
+ zpodd->zp_ready = true;
+}
+
static void zpodd_wake_dev(acpi_handle handle, u32 event, void *context)
{
struct ata_device *ata_dev = context;
@@ -182,6 +182,9 @@ extern void ata_eh_finish(struct ata_port *ap);
extern int ata_ering_map(struct ata_ering *ering,
int (*map_fn)(struct ata_ering_entry *, void *),
void *arg);
+extern unsigned int atapi_eh_tur(struct ata_device *dev, u8 *r_sense_key);
+extern unsigned int atapi_eh_request_sense(struct ata_device *dev,
+ u8 *sense_buf, u8 dfl_sense_key);
/* libata-pmp.c */
#ifdef CONFIG_SATA_PMP
@@ -238,10 +241,12 @@ static inline bool zpodd_dev_enabled(struct ata_device *dev)
{
return dev->zpodd ? true : false;
}
+void zpodd_on_suspend(struct ata_device *dev);
#else /* CONFIG_SATA_ZPODD */
static inline void zpodd_init(struct ata_device *dev) {}
static inline void zpodd_exit(struct ata_device *dev) {}
static inline bool zpodd_dev_enabled(struct ata_device *dev) { return false; }
+static inline void zpodd_on_suspend(struct ata_device *dev) {}
#endif /* CONFIG_SATA_ZPODD */
#endif /* __LIBATA_H__ */
Per the Mount Fuji spec, the ODD is considered zero power ready when: - For slot type ODD, no media inside; - For tray type ODD, no media inside and tray closed. The information can be retrieved by either the returned information of command GET_EVENT_STATUS_NOTIFICATION(the command is used to poll for media event) or sense code. The information provided by the media status byte is not accurate, it is possible that after a new disc is just inserted, the status byte still returns media not present. So this information can not be used as the deciding factor, we use sense code to decide if zpready status is true. When we first sensed the ODD in the zero power ready state, the timestamp will be recoreded. And after ODD stayed in this state for some pre-defined period, the ODD is considered as power off ready and the zp_ready flag will be set. The zp_ready flag serves as the deciding factor other code will use to see if power off is OK for the ODD. The Mount Fuji spec suggests a delay should be used here, to avoid the case user ejects the ODD and then instantly inserts a new one again, so that we can avoid a power transition. And some ODDs may be slow to place its head to the home position after disc is ejected, so a delay here is generally a good idea. And the delay time can be changed via the module param zpodd_poweroff_delay. The zero power ready status check is performed in the ata port's runtime suspend code path, when port is not frozen yet, as we need to issue some IOs to the ODD. Signed-off-by: Aaron Lu <aaron.lu@intel.com> --- drivers/ata/libata-eh.c | 10 +++++-- drivers/ata/libata-zpodd.c | 70 ++++++++++++++++++++++++++++++++++++++++++++++ drivers/ata/libata.h | 5 ++++ 3 files changed, 83 insertions(+), 2 deletions(-)