Patchwork dockstar bsp

login
register
mail settings
Submitter Steve Calfee
Date Dec. 29, 2012, 10:45 p.m.
Message ID <1356821139-9103-1-git-send-email-stevecalfee@gmail.com>
Download mbox | patch
Permalink /patch/208685/
State Superseded
Headers show

Comments

Steve Calfee - Dec. 29, 2012, 10:45 p.m.
Simple bsp for the Seagate Dockstar.

Builds and runs using buildroot 2012.11

Signed-off-by: Steve Calfee <stevecalfee@gmail.com>
---
 board/sheevaplug/Config.in                         |   13 +
 board/sheevaplug/Makefile.in                       |    4 +
 board/sheevaplug/seagatedockstar/Makefile.in       |    5 +
 board/sheevaplug/seagatedockstar/README            |   62 +++++
 .../dockstar_dev_external_toolchain_defconfig      |   24 ++
 .../dockstar_internal_toolchain_defconfig          |   21 ++
 .../dockstar_toolchain_only_defconfig              |   16 ++
 .../seagatedockstar/linux-3.2plus.config           |  294 ++++++++++++++++++++
 board/sheevaplug/seagatedockstar/patchrootfs.sh    |   14 +
 .../seagatedockstar/skeleton/etc/inittab           |   46 +++
 .../sheevaplug/seagatedockstar/skeleton/etc/shadow |   12 +
 configs/dockstart_defconfig                        |   21 ++
 12 files changed, 532 insertions(+)
 create mode 100644 board/sheevaplug/Config.in
 create mode 100644 board/sheevaplug/Makefile.in
 create mode 100644 board/sheevaplug/seagatedockstar/Makefile.in
 create mode 100644 board/sheevaplug/seagatedockstar/README
 create mode 100644 board/sheevaplug/seagatedockstar/dockstar_dev_external_toolchain_defconfig
 create mode 100644 board/sheevaplug/seagatedockstar/dockstar_internal_toolchain_defconfig
 create mode 100644 board/sheevaplug/seagatedockstar/dockstar_toolchain_only_defconfig
 create mode 100644 board/sheevaplug/seagatedockstar/linux-3.2plus.config
 create mode 100755 board/sheevaplug/seagatedockstar/patchrootfs.sh
 create mode 100644 board/sheevaplug/seagatedockstar/skeleton/etc/inittab
 create mode 100644 board/sheevaplug/seagatedockstar/skeleton/etc/shadow
 create mode 100644 configs/dockstart_defconfig
Steve Calfee - Jan. 17, 2013, 4:09 p.m.
any comments? PING

On Sat, Dec 29, 2012 at 2:45 PM, Steve Calfee <stevecalfee@gmail.com> wrote:
> Simple bsp for the Seagate Dockstar.
>
> Builds and runs using buildroot 2012.11
>
> Signed-off-by: Steve Calfee <stevecalfee@gmail.com>
> ---
>  board/sheevaplug/Config.in                         |   13 +
>  board/sheevaplug/Makefile.in                       |    4 +
>  board/sheevaplug/seagatedockstar/Makefile.in       |    5 +
>  board/sheevaplug/seagatedockstar/README            |   62 +++++
>  .../dockstar_dev_external_toolchain_defconfig      |   24 ++
>  .../dockstar_internal_toolchain_defconfig          |   21 ++
>  .../dockstar_toolchain_only_defconfig              |   16 ++
>  .../seagatedockstar/linux-3.2plus.config           |  294 ++++++++++++++++++++
>  board/sheevaplug/seagatedockstar/patchrootfs.sh    |   14 +
>  .../seagatedockstar/skeleton/etc/inittab           |   46 +++
>  .../sheevaplug/seagatedockstar/skeleton/etc/shadow |   12 +
>  configs/dockstart_defconfig                        |   21 ++
>  12 files changed, 532 insertions(+)
>  create mode 100644 board/sheevaplug/Config.in
>  create mode 100644 board/sheevaplug/Makefile.in
>  create mode 100644 board/sheevaplug/seagatedockstar/Makefile.in
>  create mode 100644 board/sheevaplug/seagatedockstar/README
>  create mode 100644 board/sheevaplug/seagatedockstar/dockstar_dev_external_toolchain_defconfig
>  create mode 100644 board/sheevaplug/seagatedockstar/dockstar_internal_toolchain_defconfig
>  create mode 100644 board/sheevaplug/seagatedockstar/dockstar_toolchain_only_defconfig
>  create mode 100644 board/sheevaplug/seagatedockstar/linux-3.2plus.config
>  create mode 100755 board/sheevaplug/seagatedockstar/patchrootfs.sh
>  create mode 100644 board/sheevaplug/seagatedockstar/skeleton/etc/inittab
>  create mode 100644 board/sheevaplug/seagatedockstar/skeleton/etc/shadow
>  create mode 100644 configs/dockstart_defconfig
>
> diff --git a/board/sheevaplug/Config.in b/board/sheevaplug/Config.in
> new file mode 100644
> index 0000000..4744591
> --- /dev/null
> +++ b/board/sheevaplug/Config.in
> @@ -0,0 +1,13 @@
> +menuconfig BR2_TARGET_SHEEVAPLUG
> +bool "Currently inserted for SeagateDockstar based on PogoPlug which is based on SheevaPlug "
> +
> +
> +if BR2_TARGET_SHEEVAPLUG
> +
> +config BR2_TARGET_SHEEVAPLUG_PROJECT_SEAGATEDOCKSTAR
> +bool "Support for user defined project DockStar"
> +help
> +This option enables support for project DockStar
> +
> +endif
> +
> diff --git a/board/sheevaplug/Makefile.in b/board/sheevaplug/Makefile.in
> new file mode 100644
> index 0000000..0850d4b
> --- /dev/null
> +++ b/board/sheevaplug/Makefile.in
> @@ -0,0 +1,4 @@
> +ifeq ($(BR2_TARGET_SHEEVAPLUG_PROJECT_SEAGATEDOCKSTAR),y)
> +include target/device/sheevaplug/SeagateDockStar/Makefile.in
> +endif
> +
> diff --git a/board/sheevaplug/seagatedockstar/Makefile.in b/board/sheevaplug/seagatedockstar/Makefile.in
> new file mode 100644
> index 0000000..8ebdfb7
> --- /dev/null
> +++ b/board/sheevaplug/seagatedockstar/Makefile.in
> @@ -0,0 +1,5 @@
> +MYNAS             = ../mynas
> +BOARD_PATH        = target/device/sheevaplug/SeagateDockStar
> +TARGET_SKELETON = target_skeleton
> +BOARD_NAME = DockStar
> +
> diff --git a/board/sheevaplug/seagatedockstar/README b/board/sheevaplug/seagatedockstar/README
> new file mode 100644
> index 0000000..2e0fb11
> --- /dev/null
> +++ b/board/sheevaplug/seagatedockstar/README
> @@ -0,0 +1,62 @@
> +README for dockstar
> +
> +All this started with a Seagate Dockstar buildroot contribution by Marcus
> +Osdoba. He got the original patches set up etc. The buildroot maintainers
> +want a minimal configuration so other uses can bring up a buildroot
> +distribution and add their own packages. I left a few that are essential to
> +using a dockstar without opening up the case.  So I configured the kernel
> +to allow booting from from either nfs or usb or the internal nand flash.
> +This was after installing Jeff Doozan's uboot which also could handle this.
> +
> +The differences needed in the target's file system skeleton are minor, but
> +important.  So locally, in this device directory, I put a skeleton
> +filesystem that you want to overlay the default system in fs/skeleton. For
> +a minimal system only etc/inittab and a password etc/shadow is changed.
> +
> +All files will be added by the patchscript on every build. So change here,
> +for your personal configuration, not in the fs/skeleton.
> +
> +Note that I added a password to etc/shadow for user "root" which is
> +password "root" so ssh connections to the target are possible.  But this
> +also affects the serial connection, so the password will need to be used
> +there too.
> +
> +While developing and testing, prevent annoying edits of the host ~/.ssh/...
> +file to change the keys, copy the target's /etc/dropbear/ directory into
> +the skeleton/etc here and it will be reapplied after every build and so the
> +keys won't change on the target. If you don't do this dropbear will
> +regenerate the keys on the first startup. I provide Marcus' initial
> +dropbear keys here, just copy the dropbear dir to the local
> +board/sheevaplug/SeagateDockStar/skeleton/etc/ directory and then
> +you will only need to type "yes" the first time to ssh.
> +
> +Cleaning up the target filesystem is a problem in Buildroot (and clean is
> +painfully slow, actually the rebuild after clean takes about an hour if you
> +are doing the toolchain too). However everything put in the skeleton dir
> +here (board/sheevaplug/SeagateDockStar/skeleton) will be installed
> +every build.
> +
> +Similarly it is a pain to try and do everything in one buildroot source
> +tree.  The clean or distclean targets require the rebuild of everything,
> +compiler, uclibc library, busybox, buildroot, and the target packages. To
> +avoid this:
> +
> +STEP ONE: Check out a complete tree and build it using
> +dockstar_toolchain_only_defconfig.
> +
> +STEP TWO: Check out another complete tree. In the new tree copy the
> +board/sheevaplug/SeagateDockStar/dockstar_external_toolchain_defconfig
> +config to the configs directory. You will have to edit the toolchain path
> +in that config (use make menuconfig) to point to your previously build
> +toolchain in the other buildroot tree.
> +
> +STEP THREE: In the new tree do a "make dockstar_dev_external_toolchain_defconfig". and use
> +the just made toolchain and libraries as external toolchains. It saves at
> +least half the build time.
> +
> +U-boot - I have not tried to use Marcus' build patches for u-boot. I have
> +successfully downloaded and installed Jeff Doozan's dockstar uboot and use
> +it with dockstar.  It is dangerous changing the bootstrap - if it is messed
> +up it means possibly "bricking" the dockstar and forcing either a jtag
> +recovery, or figuring out how to recover with a xmodem terminal, or setting
> +up an attractive plastic paperweight.
> diff --git a/board/sheevaplug/seagatedockstar/dockstar_dev_external_toolchain_defconfig b/board/sheevaplug/seagatedockstar/dockstar_dev_external_toolchain_defconfig
> new file mode 100644
> index 0000000..9c1c8bc
> --- /dev/null
> +++ b/board/sheevaplug/seagatedockstar/dockstar_dev_external_toolchain_defconfig
> @@ -0,0 +1,24 @@
> +BR2_arm=y
> +BR2_arm926t=y
> +BR2_JLEVEL=4
> +BR2_TOOLCHAIN_EXTERNAL=y
> +BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y
> +BR2_TOOLCHAIN_EXTERNAL_PATH="$(TOPDIR)/../tools/output/host/usr"
> +BR2_TOOLCHAIN_EXTERNAL_LARGEFILE=y
> +BR2_TOOLCHAIN_EXTERNAL_INET_IPV6=y
> +BR2_TOOLCHAIN_EXTERNAL_LOCALE=y
> +BR2_TOOLCHAIN_EXTERNAL_INET_RPC=y
> +BR2_TOOLCHAIN_EXTERNAL_CXX=y
> +BR2_PACKAGE_GDB=y
> +BR2_ENABLE_LOCALE_PURGE=y
> +BR2_TARGET_GENERIC_HOSTNAME="dockstar"
> +BR2_TARGET_GENERIC_ISSUE="Welcome to Dockstar and Buildroot"
> +BR2_ROOTFS_POST_BUILD_SCRIPT="$(TOPDIR)/board/sheevaplug/seagatedockstar/patchrootfs.sh"
> +BR2_TARGET_ROOTFS_UBIFS=y
> +BR2_TARGET_ROOTFS_UBIFS_RT_ZLIB=y
> +BR2_TARGET_ROOTFS_UBI=y
> +BR2_TARGET_ROOTFS_TAR_GZIP=y
> +BR2_LINUX_KERNEL=y
> +BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
> +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(topdir)board/sheevaplug/seagatedockstar/linux-3.2plus.config"
> +BR2_LINUX_KERNEL_INSTALL_TARGET=y
> diff --git a/board/sheevaplug/seagatedockstar/dockstar_internal_toolchain_defconfig b/board/sheevaplug/seagatedockstar/dockstar_internal_toolchain_defconfig
> new file mode 100644
> index 0000000..4b19aa0
> --- /dev/null
> +++ b/board/sheevaplug/seagatedockstar/dockstar_internal_toolchain_defconfig
> @@ -0,0 +1,21 @@
> +BR2_arm=y
> +BR2_arm926t=y
> +BR2_JLEVEL=4
> +BR2_PACKAGE_GDB=y
> +BR2_ENABLE_LOCALE_PURGE=y
> +BR2_TOOLCHAIN_BUILDROOT_LARGEFILE=y
> +BR2_TOOLCHAIN_BUILDROOT_INET_IPV6=y
> +BR2_TOOLCHAIN_BUILDROOT_INET_RPC=y
> +BR2_TOOLCHAIN_BUILDROOT_LOCALE=y
> +BR2_TOOLCHAIN_BUILDROOT_CXX=y
> +BR2_TARGET_GENERIC_HOSTNAME="dockstar"
> +BR2_TARGET_GENERIC_ISSUE="Welcome to Dockstar and Buildroot"
> +BR2_ROOTFS_POST_BUILD_SCRIPT="$(TOPDIR)/board/sheevaplug/seagatedockstar/patchrootfs.sh"
> +BR2_TARGET_ROOTFS_UBIFS=y
> +BR2_TARGET_ROOTFS_UBIFS_RT_ZLIB=y
> +BR2_TARGET_ROOTFS_UBI=y
> +BR2_TARGET_ROOTFS_TAR_GZIP=y
> +BR2_LINUX_KERNEL=y
> +BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
> +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(topdir)board/sheevaplug/seagatedockstar/linux-3.2plus.config"
> +BR2_LINUX_KERNEL_INSTALL_TARGET=y
> diff --git a/board/sheevaplug/seagatedockstar/dockstar_toolchain_only_defconfig b/board/sheevaplug/seagatedockstar/dockstar_toolchain_only_defconfig
> new file mode 100644
> index 0000000..8e4a771
> --- /dev/null
> +++ b/board/sheevaplug/seagatedockstar/dockstar_toolchain_only_defconfig
> @@ -0,0 +1,16 @@
> +BR2_arm=y
> +BR2_arm926t=y
> +BR2_JLEVEL=4
> +BR2_STRIP_sstrip=y
> +BR2_GCC_VERSION_4_4_X=y
> +BR2_PACKAGE_GDB=y
> +BR2_PACKAGE_GDB_SERVER=y
> +BR2_PACKAGE_GDB_HOST=y
> +BR2_ENABLE_LOCALE_PURGE=y
> +BR2_TARGET_OPTIMIZATION="-Os -pipe"
> +BR2_TOOLCHAIN_BUILDROOT_LARGEFILE=y
> +BR2_TOOLCHAIN_BUILDROOT_INET_IPV6=y
> +BR2_TOOLCHAIN_BUILDROOT_INET_RPC=y
> +BR2_TOOLCHAIN_BUILDROOT_LOCALE=y
> +BR2_TOOLCHAIN_BUILDROOT_CXX=y
> +# BR2_PACKAGE_BUSYBOX is not set
> diff --git a/board/sheevaplug/seagatedockstar/linux-3.2plus.config b/board/sheevaplug/seagatedockstar/linux-3.2plus.config
> new file mode 100644
> index 0000000..81a2303
> --- /dev/null
> +++ b/board/sheevaplug/seagatedockstar/linux-3.2plus.config
> @@ -0,0 +1,294 @@
> +# CONFIG_ARM_PATCH_PHYS_VIRT is not set
> +CONFIG_PHYS_OFFSET=0x00000000
> +CONFIG_EXPERIMENTAL=y
> +CONFIG_LOCALVERSION="-bhteam"
> +CONFIG_SYSVIPC=y
> +CONFIG_NO_HZ=y
> +CONFIG_HIGH_RES_TIMERS=y
> +CONFIG_IKCONFIG=y
> +CONFIG_IKCONFIG_PROC=y
> +CONFIG_LOG_BUF_SHIFT=19
> +CONFIG_EMBEDDED=y
> +# CONFIG_BLK_DEV_BSG is not set
> +CONFIG_ARCH_KIRKWOOD=y
> +CONFIG_MACH_DOCKSTAR=y
> +# CONFIG_CPU_FEROCEON_OLD_ID is not set
> +CONFIG_PREEMPT=y
> +CONFIG_AEABI=y
> +# CONFIG_OABI_COMPAT is not set
> +CONFIG_ZBOOT_ROM_TEXT=0x0
> +CONFIG_ZBOOT_ROM_BSS=0x0
> +CONFIG_CPU_IDLE=y
> +CONFIG_NET=y
> +CONFIG_PACKET=y
> +CONFIG_UNIX=y
> +CONFIG_INET=y
> +CONFIG_IP_MULTICAST=y
> +CONFIG_IP_PNP=y
> +CONFIG_IP_PNP_DHCP=y
> +CONFIG_IP_PNP_BOOTP=y
> +# CONFIG_IPV6 is not set
> +CONFIG_NETFILTER=y
> +CONFIG_NF_CONNTRACK=y
> +CONFIG_NF_CONNTRACK_EVENTS=y
> +CONFIG_NF_CONNTRACK_TIMESTAMP=y
> +CONFIG_NF_CT_PROTO_DCCP=y
> +CONFIG_NF_CT_PROTO_SCTP=y
> +CONFIG_NF_CT_PROTO_UDPLITE=y
> +CONFIG_NF_CONNTRACK_AMANDA=y
> +CONFIG_NF_CONNTRACK_FTP=y
> +CONFIG_NF_CONNTRACK_H323=y
> +CONFIG_NF_CONNTRACK_IRC=y
> +CONFIG_NF_CONNTRACK_NETBIOS_NS=y
> +CONFIG_NF_CONNTRACK_SNMP=y
> +CONFIG_NF_CONNTRACK_PPTP=y
> +CONFIG_NF_CONNTRACK_SANE=y
> +CONFIG_NF_CONNTRACK_SIP=y
> +CONFIG_NF_CONNTRACK_TFTP=y
> +CONFIG_NF_CT_NETLINK=y
> +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
> +CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
> +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=y
> +CONFIG_NETFILTER_XT_TARGET_LED=y
> +CONFIG_NETFILTER_XT_TARGET_MARK=y
> +CONFIG_NETFILTER_XT_TARGET_NFLOG=y
> +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
> +CONFIG_NETFILTER_XT_TARGET_TEE=y
> +CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
> +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=y
> +CONFIG_NETFILTER_XT_MATCH_CLUSTER=y
> +CONFIG_NETFILTER_XT_MATCH_COMMENT=y
> +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y
> +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y
> +CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
> +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
> +CONFIG_NETFILTER_XT_MATCH_CPU=y
> +CONFIG_NETFILTER_XT_MATCH_DCCP=y
> +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=y
> +CONFIG_NETFILTER_XT_MATCH_DSCP=y
> +CONFIG_NETFILTER_XT_MATCH_ESP=y
> +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y
> +CONFIG_NETFILTER_XT_MATCH_HELPER=y
> +CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
> +CONFIG_NETFILTER_XT_MATCH_LENGTH=y
> +CONFIG_NETFILTER_XT_MATCH_LIMIT=y
> +CONFIG_NETFILTER_XT_MATCH_MAC=y
> +CONFIG_NETFILTER_XT_MATCH_MARK=y
> +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
> +CONFIG_NETFILTER_XT_MATCH_OSF=y
> +CONFIG_NETFILTER_XT_MATCH_OWNER=y
> +CONFIG_NETFILTER_XT_MATCH_POLICY=y
> +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
> +CONFIG_NETFILTER_XT_MATCH_QUOTA=y
> +CONFIG_NETFILTER_XT_MATCH_RATEEST=y
> +CONFIG_NETFILTER_XT_MATCH_REALM=y
> +CONFIG_NETFILTER_XT_MATCH_RECENT=y
> +CONFIG_NETFILTER_XT_MATCH_SCTP=y
> +CONFIG_NETFILTER_XT_MATCH_STATE=y
> +CONFIG_NETFILTER_XT_MATCH_STATISTIC=y
> +CONFIG_NETFILTER_XT_MATCH_STRING=y
> +CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
> +CONFIG_NETFILTER_XT_MATCH_TIME=y
> +CONFIG_NETFILTER_XT_MATCH_U32=y
> +CONFIG_NF_CONNTRACK_IPV4=y
> +CONFIG_IP_NF_IPTABLES=y
> +CONFIG_IP_NF_MATCH_AH=y
> +CONFIG_IP_NF_MATCH_ECN=y
> +CONFIG_IP_NF_MATCH_TTL=y
> +CONFIG_IP_NF_FILTER=y
> +CONFIG_IP_NF_TARGET_REJECT=y
> +CONFIG_IP_NF_TARGET_ULOG=y
> +CONFIG_NF_NAT=y
> +CONFIG_IP_NF_TARGET_MASQUERADE=y
> +CONFIG_IP_NF_TARGET_NETMAP=y
> +CONFIG_IP_NF_TARGET_REDIRECT=y
> +CONFIG_IP_NF_MANGLE=y
> +CONFIG_IP_NF_TARGET_CLUSTERIP=y
> +CONFIG_IP_NF_TARGET_ECN=y
> +CONFIG_IP_NF_TARGET_TTL=y
> +CONFIG_IP_NF_RAW=y
> +CONFIG_IP_NF_ARPTABLES=y
> +CONFIG_IP_NF_ARPFILTER=y
> +CONFIG_IP_NF_ARP_MANGLE=y
> +CONFIG_NET_DSA=y
> +CONFIG_NET_PKTGEN=y
> +CONFIG_CFG80211=y
> +CONFIG_CFG80211_WEXT=y
> +CONFIG_MAC80211=y
> +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
> +CONFIG_MTD=y
> +CONFIG_MTD_CMDLINE_PARTS=y
> +CONFIG_MTD_CHAR=y
> +CONFIG_MTD_BLOCK=y
> +CONFIG_MTD_CFI=y
> +CONFIG_MTD_JEDECPROBE=y
> +CONFIG_MTD_CFI_ADV_OPTIONS=y
> +CONFIG_MTD_CFI_GEOMETRY=y
> +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
> +CONFIG_MTD_CFI_INTELEXT=y
> +CONFIG_MTD_CFI_STAA=y
> +CONFIG_MTD_PHYSMAP=y
> +CONFIG_MTD_M25P80=y
> +CONFIG_MTD_NAND=y
> +CONFIG_MTD_NAND_ORION=y
> +CONFIG_MTD_UBI=y
> +CONFIG_MTD_UBI_BEB_RESERVE=1
> +CONFIG_BLK_DEV_LOOP=y
> +# CONFIG_SCSI_PROC_FS is not set
> +CONFIG_BLK_DEV_SD=y
> +CONFIG_BLK_DEV_SR=y
> +CONFIG_CHR_DEV_SG=y
> +CONFIG_ATA=y
> +CONFIG_SATA_AHCI=y
> +CONFIG_SATA_MV=y
> +CONFIG_NETDEVICES=y
> +CONFIG_MII=y
> +CONFIG_NETCONSOLE=y
> +CONFIG_NET_DSA_MV88E6123_61_65=y
> +CONFIG_MV643XX_ETH=y
> +# CONFIG_NET_PACKET_ENGINE is not set
> +CONFIG_MARVELL_PHY=y
> +CONFIG_LIBERTAS=y
> +CONFIG_LIBERTAS_SDIO=y
> +CONFIG_RT2X00=y
> +CONFIG_RT73USB=y
> +CONFIG_INPUT_EVDEV=y
> +CONFIG_KEYBOARD_GPIO=y
> +# CONFIG_INPUT_MOUSE is not set
> +CONFIG_LEGACY_PTY_COUNT=16
> +# CONFIG_DEVKMEM is not set
> +CONFIG_SERIAL_8250=y
> +CONFIG_SERIAL_8250_CONSOLE=y
> +CONFIG_SERIAL_8250_RUNTIME_UARTS=2
> +# CONFIG_HW_RANDOM is not set
> +CONFIG_I2C=y
> +# CONFIG_I2C_COMPAT is not set
> +CONFIG_I2C_CHARDEV=y
> +CONFIG_I2C_MV64XXX=y
> +CONFIG_SPI=y
> +CONFIG_SPI_ORION=y
> +CONFIG_GPIO_SYSFS=y
> +# CONFIG_HWMON is not set
> +CONFIG_USB=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_ROOT_HUB_TT=y
> +CONFIG_USB_PRINTER=y
> +CONFIG_USB_STORAGE=y
> +CONFIG_USB_STORAGE_DATAFAB=y
> +CONFIG_USB_STORAGE_FREECOM=y
> +CONFIG_USB_STORAGE_SDDR09=y
> +CONFIG_USB_STORAGE_SDDR55=y
> +CONFIG_USB_STORAGE_JUMPSHOT=y
> +CONFIG_USB_SERIAL=y
> +CONFIG_USB_SERIAL_CONSOLE=y
> +CONFIG_USB_SERIAL_GENERIC=y
> +CONFIG_USB_SERIAL_AIRCABLE=y
> +CONFIG_USB_SERIAL_ARK3116=y
> +CONFIG_USB_SERIAL_BELKIN=y
> +CONFIG_USB_SERIAL_CH341=y
> +CONFIG_USB_SERIAL_WHITEHEAT=y
> +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=y
> +CONFIG_USB_SERIAL_CP210X=y
> +CONFIG_USB_SERIAL_CYPRESS_M8=y
> +CONFIG_USB_SERIAL_EMPEG=y
> +CONFIG_USB_SERIAL_FTDI_SIO=y
> +CONFIG_USB_SERIAL_FUNSOFT=y
> +CONFIG_USB_SERIAL_VISOR=y
> +CONFIG_USB_SERIAL_IPAQ=y
> +CONFIG_USB_SERIAL_IR=y
> +CONFIG_USB_SERIAL_EDGEPORT=y
> +CONFIG_USB_SERIAL_EDGEPORT_TI=y
> +CONFIG_USB_SERIAL_GARMIN=y
> +CONFIG_USB_SERIAL_IPW=y
> +CONFIG_USB_SERIAL_IUU=y
> +CONFIG_USB_SERIAL_KEYSPAN_PDA=y
> +CONFIG_USB_SERIAL_KEYSPAN=y
> +CONFIG_USB_SERIAL_KEYSPAN_MPR=y
> +CONFIG_USB_SERIAL_KEYSPAN_USA28=y
> +CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
> +CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
> +CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
> +CONFIG_USB_SERIAL_KEYSPAN_USA19=y
> +CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
> +CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
> +CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
> +CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
> +CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
> +CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
> +CONFIG_USB_SERIAL_KLSI=y
> +CONFIG_USB_SERIAL_KOBIL_SCT=y
> +CONFIG_USB_SERIAL_MCT_U232=y
> +CONFIG_USB_SERIAL_MOS7720=y
> +CONFIG_USB_SERIAL_MOS7840=y
> +CONFIG_USB_SERIAL_MOTOROLA=y
> +CONFIG_USB_SERIAL_NAVMAN=y
> +CONFIG_USB_SERIAL_PL2303=y
> +CONFIG_USB_SERIAL_OTI6858=y
> +CONFIG_USB_SERIAL_QCAUX=y
> +CONFIG_USB_SERIAL_QUALCOMM=y
> +CONFIG_USB_SERIAL_SPCP8X5=y
> +CONFIG_USB_SERIAL_HP4X=y
> +CONFIG_USB_SERIAL_SAFE=y
> +CONFIG_USB_SERIAL_SAFE_PADDED=y
> +CONFIG_USB_SERIAL_SIEMENS_MPI=y
> +CONFIG_USB_SERIAL_SIERRAWIRELESS=y
> +CONFIG_USB_SERIAL_SYMBOL=y
> +CONFIG_USB_SERIAL_TI=y
> +CONFIG_USB_SERIAL_CYBERJACK=y
> +CONFIG_USB_SERIAL_XIRCOM=y
> +CONFIG_USB_SERIAL_OPTION=y
> +CONFIG_USB_SERIAL_OMNINET=y
> +CONFIG_USB_SERIAL_OPTICON=y
> +CONFIG_USB_SERIAL_VIVOPAY_SERIAL=y
> +CONFIG_USB_SERIAL_ZIO=y
> +CONFIG_USB_SERIAL_SSU100=y
> +CONFIG_USB_SEVSEG=y
> +CONFIG_USB_RIO500=y
> +CONFIG_USB_LEGOTOWER=y
> +CONFIG_USB_LCD=y
> +CONFIG_USB_LED=y
> +CONFIG_MMC=y
> +CONFIG_SDIO_UART=y
> +CONFIG_MMC_MVSDIO=y
> +CONFIG_NEW_LEDS=y
> +CONFIG_LEDS_CLASS=y
> +CONFIG_LEDS_GPIO=y
> +CONFIG_LEDS_TRIGGERS=y
> +CONFIG_LEDS_TRIGGER_TIMER=y
> +CONFIG_LEDS_TRIGGER_HEARTBEAT=y
> +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
> +CONFIG_RTC_CLASS=y
> +CONFIG_RTC_DRV_S35390A=y
> +CONFIG_RTC_DRV_MV=y
> +CONFIG_DMADEVICES=y
> +CONFIG_MV_XOR=y
> +CONFIG_EXT2_FS=y
> +CONFIG_EXT3_FS=y
> +# CONFIG_EXT3_FS_XATTR is not set
> +CONFIG_MSDOS_FS=y
> +CONFIG_VFAT_FS=y
> +CONFIG_TMPFS=y
> +CONFIG_JFFS2_FS=y
> +CONFIG_UBIFS_FS=y
> +CONFIG_UBIFS_FS_ADVANCED_COMPR=y
> +CONFIG_CRAMFS=y
> +CONFIG_NFS_FS=y
> +CONFIG_ROOT_NFS=y
> +CONFIG_NLS_CODEPAGE_437=y
> +CONFIG_NLS_CODEPAGE_850=y
> +CONFIG_NLS_ISO8859_1=y
> +CONFIG_NLS_ISO8859_2=y
> +CONFIG_NLS_UTF8=y
> +CONFIG_MAGIC_SYSRQ=y
> +CONFIG_DEBUG_FS=y
> +# CONFIG_SCHED_DEBUG is not set
> +# CONFIG_DEBUG_PREEMPT is not set
> +CONFIG_DEBUG_INFO=y
> +# CONFIG_FTRACE is not set
> +CONFIG_DEBUG_USER=y
> +CONFIG_DEBUG_LL=y
> +CONFIG_CRYPTO_CBC=y
> +CONFIG_CRYPTO_PCBC=y
> +# CONFIG_CRYPTO_ANSI_CPRNG is not set
> +CONFIG_CRYPTO_DEV_MV_CESA=y
> +CONFIG_CRC_CCITT=y
> diff --git a/board/sheevaplug/seagatedockstar/patchrootfs.sh b/board/sheevaplug/seagatedockstar/patchrootfs.sh
> new file mode 100755
> index 0000000..dc5a308
> --- /dev/null
> +++ b/board/sheevaplug/seagatedockstar/patchrootfs.sh
> @@ -0,0 +1,14 @@
> +#!/bin/bash
> +#
> +# script which runs before creating rootfs
> +#
> +#
> +MAINDIR=${1}/../../
> +SRCDIR=${MAINDIR}"board/sheevaplug/seagatedockstar/skeleton/*"
> +DESTDIR=${1}
> +echo "patching some stuff in " ${DESTDIR} from ${SRCDIR}
> +#echo "DESTDIR " ${DESTDIR}
> +#echo "SRCDIR " ${SRCDIR}
> +#ls -l ${SRCDIR} ${SRCDIR}"/etc"
> +cp -rv ${SRCDIR} ${DESTDIR}
> +echo "end of userdefined script before packing rootfs"
> diff --git a/board/sheevaplug/seagatedockstar/skeleton/etc/inittab b/board/sheevaplug/seagatedockstar/skeleton/etc/inittab
> new file mode 100644
> index 0000000..2111d5d
> --- /dev/null
> +++ b/board/sheevaplug/seagatedockstar/skeleton/etc/inittab
> @@ -0,0 +1,46 @@
> +# /etc/inittab
> +#
> +# Copyright (C) 2001 Erik Andersen <andersen@codepoet.org>
> +#
> +# Note: BusyBox init doesn't support runlevels.  The runlevels field is
> +# completely ignored by BusyBox init. If you want runlevels, use
> +# sysvinit.
> +#
> +# Format for each entry: <id>:<runlevels>:<action>:<process>
> +#
> +# id        == tty to run on, or empty for /dev/console
> +# runlevels == ignored
> +# action    == one of sysinit, respawn, askfirst, wait, and once
> +# process   == program to run
> +
> +# Startup the system
> +#null::sysinit:/bin/mount -o remount,rw /
> +null::sysinit:/bin/mount -t proc proc /proc
> +null::sysinit:/bin/mkdir -p /dev/pts
> +null::sysinit:/bin/mount -a
> +null::sysinit:/bin/hostname -F /etc/hostname
> +# now run any rc scripts
> +::sysinit:/etc/init.d/rcS
> +
> +# Set up a couple of getty's
> +#tty1::respawn:/sbin/getty 38400 tty1
> +#tty2::respawn:/sbin/getty 38400 tty2
> +
> +# Put a getty on the serial port
> +ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100 # GENERIC_SERIAL
> +
> +# Logging junk
> +null::sysinit:/bin/touch /var/log/messages
> +null::respawn:/sbin/syslogd -n -m 0
> +null::respawn:/sbin/klogd -n
> +tty3::respawn:/usr/bin/tail -f /var/log/messages
> +
> +# Stuff to do for the 3-finger salute
> +::ctrlaltdel:/sbin/reboot
> +
> +# Stuff to do before rebooting
> +null::shutdown:/usr/bin/killall klogd
> +null::shutdown:/usr/bin/killall syslogd
> +null::shutdown:/bin/umount -a -r
> +null::shutdown:/sbin/swapoff -a
> +
> diff --git a/board/sheevaplug/seagatedockstar/skeleton/etc/shadow b/board/sheevaplug/seagatedockstar/skeleton/etc/shadow
> new file mode 100644
> index 0000000..ff29c40
> --- /dev/null
> +++ b/board/sheevaplug/seagatedockstar/skeleton/etc/shadow
> @@ -0,0 +1,12 @@
> +root:$1$LqBi5GdU$mYosovzQVc9h8Szv7dtX0/:0:0:99999:7:::
> +bin:*:10933:0:99999:7:::
> +daemon:*:10933:0:99999:7:::
> +adm:*:10933:0:99999:7:::
> +lp:*:10933:0:99999:7:::
> +sync:*:10933:0:99999:7:::
> +shutdown:*:10933:0:99999:7:::
> +halt:*:10933:0:99999:7:::
> +uucp:*:10933:0:99999:7:::
> +operator:*:10933:0:99999:7:::
> +nobody:*:10933:0:99999:7:::
> +default::10933:0:99999:7:::
> diff --git a/configs/dockstart_defconfig b/configs/dockstart_defconfig
> new file mode 100644
> index 0000000..4b19aa0
> --- /dev/null
> +++ b/configs/dockstart_defconfig
> @@ -0,0 +1,21 @@
> +BR2_arm=y
> +BR2_arm926t=y
> +BR2_JLEVEL=4
> +BR2_PACKAGE_GDB=y
> +BR2_ENABLE_LOCALE_PURGE=y
> +BR2_TOOLCHAIN_BUILDROOT_LARGEFILE=y
> +BR2_TOOLCHAIN_BUILDROOT_INET_IPV6=y
> +BR2_TOOLCHAIN_BUILDROOT_INET_RPC=y
> +BR2_TOOLCHAIN_BUILDROOT_LOCALE=y
> +BR2_TOOLCHAIN_BUILDROOT_CXX=y
> +BR2_TARGET_GENERIC_HOSTNAME="dockstar"
> +BR2_TARGET_GENERIC_ISSUE="Welcome to Dockstar and Buildroot"
> +BR2_ROOTFS_POST_BUILD_SCRIPT="$(TOPDIR)/board/sheevaplug/seagatedockstar/patchrootfs.sh"
> +BR2_TARGET_ROOTFS_UBIFS=y
> +BR2_TARGET_ROOTFS_UBIFS_RT_ZLIB=y
> +BR2_TARGET_ROOTFS_UBI=y
> +BR2_TARGET_ROOTFS_TAR_GZIP=y
> +BR2_LINUX_KERNEL=y
> +BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
> +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(topdir)board/sheevaplug/seagatedockstar/linux-3.2plus.config"
> +BR2_LINUX_KERNEL_INSTALL_TARGET=y
> --
> 1.7.9.5
>
Thomas Petazzoni - Jan. 17, 2013, 4:24 p.m.
Dear Steve Calfee,

On Sat, 29 Dec 2012 14:45:39 -0800, Steve Calfee wrote:
> Simple bsp for the Seagate Dockstar.
> 
> Builds and runs using buildroot 2012.11
> 
> Signed-off-by: Steve Calfee <stevecalfee@gmail.com>
> ---
>  board/sheevaplug/Config.in                         |   13 +
>  board/sheevaplug/Makefile.in                       |    4 +
>  board/sheevaplug/seagatedockstar/Makefile.in       |    5 +

No, we really don't want per-board configuration options or Makefiles.
A board is just a particular configuration of Buildroot.

Moreover your Makefile.in files still reference some old files in
target/device/ that no longer exist.

>  board/sheevaplug/seagatedockstar/README            |   62 +++++

The README file should not be a story of how the thing was written, but
simply how to use this configuration on this particular hardware (how
to flash the images, etc.).

>  .../dockstar_dev_external_toolchain_defconfig      |   24 ++
>  .../dockstar_internal_toolchain_defconfig          |   21 ++
>  .../dockstar_toolchain_only_defconfig              |   16 ++

Those configurations are useless as they are not visible through "make
help" or "make <foobar>_defconfig". And anyway, we only want one
configuration per board.

>  .../seagatedockstar/linux-3.2plus.config           |  294 ++++++++++++++++++++
>  board/sheevaplug/seagatedockstar/patchrootfs.sh    |   14 +
>  .../seagatedockstar/skeleton/etc/inittab           |   46 +++
>  .../sheevaplug/seagatedockstar/skeleton/etc/shadow |   12 +

Why is it needed to override the default inittab and shadow?

>  configs/dockstart_defconfig                        |   21 ++

> --- /dev/null
> +++ b/configs/dockstart_defconfig
> @@ -0,0 +1,21 @@
> +BR2_arm=y
> +BR2_arm926t=y

Ok for those two ones.

> +BR2_JLEVEL=4
> +BR2_PACKAGE_GDB=y
> +BR2_ENABLE_LOCALE_PURGE=y
> +BR2_TOOLCHAIN_BUILDROOT_LARGEFILE=y
> +BR2_TOOLCHAIN_BUILDROOT_INET_IPV6=y
> +BR2_TOOLCHAIN_BUILDROOT_INET_RPC=y
> +BR2_TOOLCHAIN_BUILDROOT_LOCALE=y
> +BR2_TOOLCHAIN_BUILDROOT_CXX=y
> +BR2_TARGET_GENERIC_HOSTNAME="dockstar"
> +BR2_TARGET_GENERIC_ISSUE="Welcome to Dockstar and Buildroot"
> +BR2_ROOTFS_POST_BUILD_SCRIPT="$(TOPDIR)/board/sheevaplug/seagatedockstar/patchrootfs.sh"

I don't think any of these is needed.

> +BR2_TARGET_ROOTFS_UBIFS=y
> +BR2_TARGET_ROOTFS_UBIFS_RT_ZLIB=y
> +BR2_TARGET_ROOTFS_UBI=y
> +BR2_TARGET_ROOTFS_TAR_GZIP=y
> +BR2_LINUX_KERNEL=y
> +BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
> +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(topdir)board/sheevaplug/seagatedockstar/linux-3.2plus.config"
> +BR2_LINUX_KERNEL_INSTALL_TARGET=y

Ok. Is installation of the kernel image inside the target filesystem
really needed? How does this board boots?

To summarize, a board configuration in Buildroot is just:

 * A minimal defconfig in configs/<blabla>_defconfig, that selects the
   proper architecture, proper bootloader, filesystem image format and
   kernel version/configuration. No toolchain options, no packages, etc.

 * Possibly in board/<manufacturer>/<boardname>/, a kernel
   configuration file, a README file, and other files that have to be
   added in the root filesystem to make the board work.

Thanks!

Thomas
Steve Calfee - Jan. 17, 2013, 8:02 p.m.
On Thu, Jan 17, 2013 at 8:24 AM, Thomas Petazzoni
<thomas.petazzoni@free-electrons.com> wrote:
> Dear Steve Calfee,
>
> On Sat, 29 Dec 2012 14:45:39 -0800, Steve Calfee wrote:
>> Simple bsp for the Seagate Dockstar.
>>
>> Builds and runs using buildroot 2012.11
>>
>> Signed-off-by: Steve Calfee <stevecalfee@gmail.com>
>> ---
>>  board/sheevaplug/Config.in                         |   13 +
>>  board/sheevaplug/Makefile.in                       |    4 +
>>  board/sheevaplug/seagatedockstar/Makefile.in       |    5 +
>
> No, we really don't want per-board configuration options or Makefiles.
> A board is just a particular configuration of Buildroot.
>
> Moreover your Makefile.in files still reference some old files in
> target/device/ that no longer exist.
>
>>  board/sheevaplug/seagatedockstar/README            |   62 +++++
>
> The README file should not be a story of how the thing was written, but
> simply how to use this configuration on this particular hardware (how
> to flash the images, etc.).
>
>>  .../dockstar_dev_external_toolchain_defconfig      |   24 ++
>>  .../dockstar_internal_toolchain_defconfig          |   21 ++
>>  .../dockstar_toolchain_only_defconfig              |   16 ++
>
> Those configurations are useless as they are not visible through "make
> help" or "make <foobar>_defconfig". And anyway, we only want one
> configuration per board.
>
>>  .../seagatedockstar/linux-3.2plus.config           |  294 ++++++++++++++++++++
>>  board/sheevaplug/seagatedockstar/patchrootfs.sh    |   14 +
>>  .../seagatedockstar/skeleton/etc/inittab           |   46 +++
>>  .../sheevaplug/seagatedockstar/skeleton/etc/shadow |   12 +
>
> Why is it needed to override the default inittab and shadow?
>
>>  configs/dockstart_defconfig                        |   21 ++
>
>> --- /dev/null
>> +++ b/configs/dockstart_defconfig
>> @@ -0,0 +1,21 @@
>> +BR2_arm=y
>> +BR2_arm926t=y
>
> Ok for those two ones.
>
>> +BR2_JLEVEL=4
>> +BR2_PACKAGE_GDB=y
>> +BR2_ENABLE_LOCALE_PURGE=y
>> +BR2_TOOLCHAIN_BUILDROOT_LARGEFILE=y
>> +BR2_TOOLCHAIN_BUILDROOT_INET_IPV6=y
>> +BR2_TOOLCHAIN_BUILDROOT_INET_RPC=y
>> +BR2_TOOLCHAIN_BUILDROOT_LOCALE=y
>> +BR2_TOOLCHAIN_BUILDROOT_CXX=y
>> +BR2_TARGET_GENERIC_HOSTNAME="dockstar"
>> +BR2_TARGET_GENERIC_ISSUE="Welcome to Dockstar and Buildroot"
>> +BR2_ROOTFS_POST_BUILD_SCRIPT="$(TOPDIR)/board/sheevaplug/seagatedockstar/patchrootfs.sh"
>
> I don't think any of these is needed.
>
>> +BR2_TARGET_ROOTFS_UBIFS=y
>> +BR2_TARGET_ROOTFS_UBIFS_RT_ZLIB=y
>> +BR2_TARGET_ROOTFS_UBI=y
>> +BR2_TARGET_ROOTFS_TAR_GZIP=y
>> +BR2_LINUX_KERNEL=y
>> +BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
>> +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(topdir)board/sheevaplug/seagatedockstar/linux-3.2plus.config"
>> +BR2_LINUX_KERNEL_INSTALL_TARGET=y
>
> Ok. Is installation of the kernel image inside the target filesystem
> really needed? How does this board boots?
>
> To summarize, a board configuration in Buildroot is just:
>
>  * A minimal defconfig in configs/<blabla>_defconfig, that selects the
>    proper architecture, proper bootloader, filesystem image format and
>    kernel version/configuration. No toolchain options, no packages, etc.
>
>  * Possibly in board/<manufacturer>/<boardname>/, a kernel
>    configuration file, a README file, and other files that have to be
>    added in the root filesystem to make the board work.
>
> Thanks!
>
> Thomas
> --
> Thomas Petazzoni, Free Electrons
> Kernel, drivers, real-time and embedded Linux
> development, consulting, training and support.
> http://free-electrons.com

Hi Thomas,

Thank you for your review. I will simplify and try again.

Regards, Steve
Arnout Vandecappelle - Jan. 19, 2013, 1:32 p.m.
On 17/01/13 17:24, Thomas Petazzoni wrote:
> On Sat, 29 Dec 2012 14:45:39 -0800, Steve Calfee wrote:
[snip]

>> >    board/sheevaplug/seagatedockstar/README            |   62 +++++
> The README file should not be a story of how the thing was written, but
> simply how to use this configuration on this particular hardware (how
> to flash the images, etc.).

  The story of how the thing was written can be part of the commit 
message, however. Although 62 lines of commit message is probably too 
much as well.

  Regards,
  Arnout

Patch

diff --git a/board/sheevaplug/Config.in b/board/sheevaplug/Config.in
new file mode 100644
index 0000000..4744591
--- /dev/null
+++ b/board/sheevaplug/Config.in
@@ -0,0 +1,13 @@ 
+menuconfig BR2_TARGET_SHEEVAPLUG
+bool "Currently inserted for SeagateDockstar based on PogoPlug which is based on SheevaPlug "
+
+
+if BR2_TARGET_SHEEVAPLUG
+
+config BR2_TARGET_SHEEVAPLUG_PROJECT_SEAGATEDOCKSTAR
+bool "Support for user defined project DockStar"
+help
+This option enables support for project DockStar
+
+endif
+
diff --git a/board/sheevaplug/Makefile.in b/board/sheevaplug/Makefile.in
new file mode 100644
index 0000000..0850d4b
--- /dev/null
+++ b/board/sheevaplug/Makefile.in
@@ -0,0 +1,4 @@ 
+ifeq ($(BR2_TARGET_SHEEVAPLUG_PROJECT_SEAGATEDOCKSTAR),y)
+include target/device/sheevaplug/SeagateDockStar/Makefile.in
+endif
+
diff --git a/board/sheevaplug/seagatedockstar/Makefile.in b/board/sheevaplug/seagatedockstar/Makefile.in
new file mode 100644
index 0000000..8ebdfb7
--- /dev/null
+++ b/board/sheevaplug/seagatedockstar/Makefile.in
@@ -0,0 +1,5 @@ 
+MYNAS             = ../mynas
+BOARD_PATH        = target/device/sheevaplug/SeagateDockStar
+TARGET_SKELETON = target_skeleton
+BOARD_NAME = DockStar
+
diff --git a/board/sheevaplug/seagatedockstar/README b/board/sheevaplug/seagatedockstar/README
new file mode 100644
index 0000000..2e0fb11
--- /dev/null
+++ b/board/sheevaplug/seagatedockstar/README
@@ -0,0 +1,62 @@ 
+README for dockstar
+
+All this started with a Seagate Dockstar buildroot contribution by Marcus
+Osdoba. He got the original patches set up etc. The buildroot maintainers
+want a minimal configuration so other uses can bring up a buildroot
+distribution and add their own packages. I left a few that are essential to
+using a dockstar without opening up the case.  So I configured the kernel
+to allow booting from from either nfs or usb or the internal nand flash.
+This was after installing Jeff Doozan's uboot which also could handle this.
+
+The differences needed in the target's file system skeleton are minor, but
+important.  So locally, in this device directory, I put a skeleton
+filesystem that you want to overlay the default system in fs/skeleton. For
+a minimal system only etc/inittab and a password etc/shadow is changed.
+
+All files will be added by the patchscript on every build. So change here,
+for your personal configuration, not in the fs/skeleton.
+
+Note that I added a password to etc/shadow for user "root" which is
+password "root" so ssh connections to the target are possible.  But this
+also affects the serial connection, so the password will need to be used
+there too.
+
+While developing and testing, prevent annoying edits of the host ~/.ssh/...
+file to change the keys, copy the target's /etc/dropbear/ directory into
+the skeleton/etc here and it will be reapplied after every build and so the
+keys won't change on the target. If you don't do this dropbear will
+regenerate the keys on the first startup. I provide Marcus' initial
+dropbear keys here, just copy the dropbear dir to the local
+board/sheevaplug/SeagateDockStar/skeleton/etc/ directory and then
+you will only need to type "yes" the first time to ssh.
+
+Cleaning up the target filesystem is a problem in Buildroot (and clean is
+painfully slow, actually the rebuild after clean takes about an hour if you
+are doing the toolchain too). However everything put in the skeleton dir
+here (board/sheevaplug/SeagateDockStar/skeleton) will be installed
+every build.
+
+Similarly it is a pain to try and do everything in one buildroot source
+tree.  The clean or distclean targets require the rebuild of everything,
+compiler, uclibc library, busybox, buildroot, and the target packages. To
+avoid this:
+
+STEP ONE: Check out a complete tree and build it using
+dockstar_toolchain_only_defconfig. 
+
+STEP TWO: Check out another complete tree. In the new tree copy the
+board/sheevaplug/SeagateDockStar/dockstar_external_toolchain_defconfig
+config to the configs directory. You will have to edit the toolchain path
+in that config (use make menuconfig) to point to your previously build
+toolchain in the other buildroot tree.
+
+STEP THREE: In the new tree do a "make dockstar_dev_external_toolchain_defconfig". and use
+the just made toolchain and libraries as external toolchains. It saves at
+least half the build time.
+
+U-boot - I have not tried to use Marcus' build patches for u-boot. I have
+successfully downloaded and installed Jeff Doozan's dockstar uboot and use
+it with dockstar.  It is dangerous changing the bootstrap - if it is messed
+up it means possibly "bricking" the dockstar and forcing either a jtag
+recovery, or figuring out how to recover with a xmodem terminal, or setting
+up an attractive plastic paperweight.
diff --git a/board/sheevaplug/seagatedockstar/dockstar_dev_external_toolchain_defconfig b/board/sheevaplug/seagatedockstar/dockstar_dev_external_toolchain_defconfig
new file mode 100644
index 0000000..9c1c8bc
--- /dev/null
+++ b/board/sheevaplug/seagatedockstar/dockstar_dev_external_toolchain_defconfig
@@ -0,0 +1,24 @@ 
+BR2_arm=y
+BR2_arm926t=y
+BR2_JLEVEL=4
+BR2_TOOLCHAIN_EXTERNAL=y
+BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y
+BR2_TOOLCHAIN_EXTERNAL_PATH="$(TOPDIR)/../tools/output/host/usr"
+BR2_TOOLCHAIN_EXTERNAL_LARGEFILE=y
+BR2_TOOLCHAIN_EXTERNAL_INET_IPV6=y
+BR2_TOOLCHAIN_EXTERNAL_LOCALE=y
+BR2_TOOLCHAIN_EXTERNAL_INET_RPC=y
+BR2_TOOLCHAIN_EXTERNAL_CXX=y
+BR2_PACKAGE_GDB=y
+BR2_ENABLE_LOCALE_PURGE=y
+BR2_TARGET_GENERIC_HOSTNAME="dockstar"
+BR2_TARGET_GENERIC_ISSUE="Welcome to Dockstar and Buildroot"
+BR2_ROOTFS_POST_BUILD_SCRIPT="$(TOPDIR)/board/sheevaplug/seagatedockstar/patchrootfs.sh"
+BR2_TARGET_ROOTFS_UBIFS=y
+BR2_TARGET_ROOTFS_UBIFS_RT_ZLIB=y
+BR2_TARGET_ROOTFS_UBI=y
+BR2_TARGET_ROOTFS_TAR_GZIP=y
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(topdir)board/sheevaplug/seagatedockstar/linux-3.2plus.config"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
diff --git a/board/sheevaplug/seagatedockstar/dockstar_internal_toolchain_defconfig b/board/sheevaplug/seagatedockstar/dockstar_internal_toolchain_defconfig
new file mode 100644
index 0000000..4b19aa0
--- /dev/null
+++ b/board/sheevaplug/seagatedockstar/dockstar_internal_toolchain_defconfig
@@ -0,0 +1,21 @@ 
+BR2_arm=y
+BR2_arm926t=y
+BR2_JLEVEL=4
+BR2_PACKAGE_GDB=y
+BR2_ENABLE_LOCALE_PURGE=y
+BR2_TOOLCHAIN_BUILDROOT_LARGEFILE=y
+BR2_TOOLCHAIN_BUILDROOT_INET_IPV6=y
+BR2_TOOLCHAIN_BUILDROOT_INET_RPC=y
+BR2_TOOLCHAIN_BUILDROOT_LOCALE=y
+BR2_TOOLCHAIN_BUILDROOT_CXX=y
+BR2_TARGET_GENERIC_HOSTNAME="dockstar"
+BR2_TARGET_GENERIC_ISSUE="Welcome to Dockstar and Buildroot"
+BR2_ROOTFS_POST_BUILD_SCRIPT="$(TOPDIR)/board/sheevaplug/seagatedockstar/patchrootfs.sh"
+BR2_TARGET_ROOTFS_UBIFS=y
+BR2_TARGET_ROOTFS_UBIFS_RT_ZLIB=y
+BR2_TARGET_ROOTFS_UBI=y
+BR2_TARGET_ROOTFS_TAR_GZIP=y
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(topdir)board/sheevaplug/seagatedockstar/linux-3.2plus.config"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
diff --git a/board/sheevaplug/seagatedockstar/dockstar_toolchain_only_defconfig b/board/sheevaplug/seagatedockstar/dockstar_toolchain_only_defconfig
new file mode 100644
index 0000000..8e4a771
--- /dev/null
+++ b/board/sheevaplug/seagatedockstar/dockstar_toolchain_only_defconfig
@@ -0,0 +1,16 @@ 
+BR2_arm=y
+BR2_arm926t=y
+BR2_JLEVEL=4
+BR2_STRIP_sstrip=y
+BR2_GCC_VERSION_4_4_X=y
+BR2_PACKAGE_GDB=y
+BR2_PACKAGE_GDB_SERVER=y
+BR2_PACKAGE_GDB_HOST=y
+BR2_ENABLE_LOCALE_PURGE=y
+BR2_TARGET_OPTIMIZATION="-Os -pipe"
+BR2_TOOLCHAIN_BUILDROOT_LARGEFILE=y
+BR2_TOOLCHAIN_BUILDROOT_INET_IPV6=y
+BR2_TOOLCHAIN_BUILDROOT_INET_RPC=y
+BR2_TOOLCHAIN_BUILDROOT_LOCALE=y
+BR2_TOOLCHAIN_BUILDROOT_CXX=y
+# BR2_PACKAGE_BUSYBOX is not set
diff --git a/board/sheevaplug/seagatedockstar/linux-3.2plus.config b/board/sheevaplug/seagatedockstar/linux-3.2plus.config
new file mode 100644
index 0000000..81a2303
--- /dev/null
+++ b/board/sheevaplug/seagatedockstar/linux-3.2plus.config
@@ -0,0 +1,294 @@ 
+# CONFIG_ARM_PATCH_PHYS_VIRT is not set
+CONFIG_PHYS_OFFSET=0x00000000
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCALVERSION="-bhteam"
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=19
+CONFIG_EMBEDDED=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_KIRKWOOD=y
+CONFIG_MACH_DOCKSTAR=y
+# CONFIG_CPU_FEROCEON_OLD_ID is not set
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CPU_IDLE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+CONFIG_NF_CONNTRACK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CONNTRACK_TIMESTAMP=y
+CONFIG_NF_CT_PROTO_DCCP=y
+CONFIG_NF_CT_PROTO_SCTP=y
+CONFIG_NF_CT_PROTO_UDPLITE=y
+CONFIG_NF_CONNTRACK_AMANDA=y
+CONFIG_NF_CONNTRACK_FTP=y
+CONFIG_NF_CONNTRACK_H323=y
+CONFIG_NF_CONNTRACK_IRC=y
+CONFIG_NF_CONNTRACK_NETBIOS_NS=y
+CONFIG_NF_CONNTRACK_SNMP=y
+CONFIG_NF_CONNTRACK_PPTP=y
+CONFIG_NF_CONNTRACK_SANE=y
+CONFIG_NF_CONNTRACK_SIP=y
+CONFIG_NF_CONNTRACK_TFTP=y
+CONFIG_NF_CT_NETLINK=y
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=y
+CONFIG_NETFILTER_XT_TARGET_LED=y
+CONFIG_NETFILTER_XT_TARGET_MARK=y
+CONFIG_NETFILTER_XT_TARGET_NFLOG=y
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
+CONFIG_NETFILTER_XT_TARGET_TEE=y
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=y
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=y
+CONFIG_NETFILTER_XT_MATCH_COMMENT=y
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
+CONFIG_NETFILTER_XT_MATCH_CPU=y
+CONFIG_NETFILTER_XT_MATCH_DCCP=y
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=y
+CONFIG_NETFILTER_XT_MATCH_DSCP=y
+CONFIG_NETFILTER_XT_MATCH_ESP=y
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y
+CONFIG_NETFILTER_XT_MATCH_HELPER=y
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
+CONFIG_NETFILTER_XT_MATCH_LENGTH=y
+CONFIG_NETFILTER_XT_MATCH_LIMIT=y
+CONFIG_NETFILTER_XT_MATCH_MAC=y
+CONFIG_NETFILTER_XT_MATCH_MARK=y
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
+CONFIG_NETFILTER_XT_MATCH_OSF=y
+CONFIG_NETFILTER_XT_MATCH_OWNER=y
+CONFIG_NETFILTER_XT_MATCH_POLICY=y
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
+CONFIG_NETFILTER_XT_MATCH_QUOTA=y
+CONFIG_NETFILTER_XT_MATCH_RATEEST=y
+CONFIG_NETFILTER_XT_MATCH_REALM=y
+CONFIG_NETFILTER_XT_MATCH_RECENT=y
+CONFIG_NETFILTER_XT_MATCH_SCTP=y
+CONFIG_NETFILTER_XT_MATCH_STATE=y
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=y
+CONFIG_NETFILTER_XT_MATCH_STRING=y
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
+CONFIG_NETFILTER_XT_MATCH_TIME=y
+CONFIG_NETFILTER_XT_MATCH_U32=y
+CONFIG_NF_CONNTRACK_IPV4=y
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_MATCH_AH=y
+CONFIG_IP_NF_MATCH_ECN=y
+CONFIG_IP_NF_MATCH_TTL=y
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
+CONFIG_IP_NF_TARGET_ULOG=y
+CONFIG_NF_NAT=y
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+CONFIG_IP_NF_TARGET_NETMAP=y
+CONFIG_IP_NF_TARGET_REDIRECT=y
+CONFIG_IP_NF_MANGLE=y
+CONFIG_IP_NF_TARGET_CLUSTERIP=y
+CONFIG_IP_NF_TARGET_ECN=y
+CONFIG_IP_NF_TARGET_TTL=y
+CONFIG_IP_NF_RAW=y
+CONFIG_IP_NF_ARPTABLES=y
+CONFIG_IP_NF_ARPFILTER=y
+CONFIG_IP_NF_ARP_MANGLE=y
+CONFIG_NET_DSA=y
+CONFIG_NET_PKTGEN=y
+CONFIG_CFG80211=y
+CONFIG_CFG80211_WEXT=y
+CONFIG_MAC80211=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ORION=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_MV=y
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_NETCONSOLE=y
+CONFIG_NET_DSA_MV88E6123_61_65=y
+CONFIG_MV643XX_ETH=y
+# CONFIG_NET_PACKET_ENGINE is not set
+CONFIG_MARVELL_PHY=y
+CONFIG_LIBERTAS=y
+CONFIG_LIBERTAS_SDIO=y
+CONFIG_RT2X00=y
+CONFIG_RT73USB=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MV64XXX=y
+CONFIG_SPI=y
+CONFIG_SPI_ORION=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_PRINTER=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_CONSOLE=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=y
+CONFIG_USB_SERIAL_ARK3116=y
+CONFIG_USB_SERIAL_BELKIN=y
+CONFIG_USB_SERIAL_CH341=y
+CONFIG_USB_SERIAL_WHITEHEAT=y
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=y
+CONFIG_USB_SERIAL_CP210X=y
+CONFIG_USB_SERIAL_CYPRESS_M8=y
+CONFIG_USB_SERIAL_EMPEG=y
+CONFIG_USB_SERIAL_FTDI_SIO=y
+CONFIG_USB_SERIAL_FUNSOFT=y
+CONFIG_USB_SERIAL_VISOR=y
+CONFIG_USB_SERIAL_IPAQ=y
+CONFIG_USB_SERIAL_IR=y
+CONFIG_USB_SERIAL_EDGEPORT=y
+CONFIG_USB_SERIAL_EDGEPORT_TI=y
+CONFIG_USB_SERIAL_GARMIN=y
+CONFIG_USB_SERIAL_IPW=y
+CONFIG_USB_SERIAL_IUU=y
+CONFIG_USB_SERIAL_KEYSPAN_PDA=y
+CONFIG_USB_SERIAL_KEYSPAN=y
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+CONFIG_USB_SERIAL_KLSI=y
+CONFIG_USB_SERIAL_KOBIL_SCT=y
+CONFIG_USB_SERIAL_MCT_U232=y
+CONFIG_USB_SERIAL_MOS7720=y
+CONFIG_USB_SERIAL_MOS7840=y
+CONFIG_USB_SERIAL_MOTOROLA=y
+CONFIG_USB_SERIAL_NAVMAN=y
+CONFIG_USB_SERIAL_PL2303=y
+CONFIG_USB_SERIAL_OTI6858=y
+CONFIG_USB_SERIAL_QCAUX=y
+CONFIG_USB_SERIAL_QUALCOMM=y
+CONFIG_USB_SERIAL_SPCP8X5=y
+CONFIG_USB_SERIAL_HP4X=y
+CONFIG_USB_SERIAL_SAFE=y
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+CONFIG_USB_SERIAL_SIEMENS_MPI=y
+CONFIG_USB_SERIAL_SIERRAWIRELESS=y
+CONFIG_USB_SERIAL_SYMBOL=y
+CONFIG_USB_SERIAL_TI=y
+CONFIG_USB_SERIAL_CYBERJACK=y
+CONFIG_USB_SERIAL_XIRCOM=y
+CONFIG_USB_SERIAL_OPTION=y
+CONFIG_USB_SERIAL_OMNINET=y
+CONFIG_USB_SERIAL_OPTICON=y
+CONFIG_USB_SERIAL_VIVOPAY_SERIAL=y
+CONFIG_USB_SERIAL_ZIO=y
+CONFIG_USB_SERIAL_SSU100=y
+CONFIG_USB_SEVSEG=y
+CONFIG_USB_RIO500=y
+CONFIG_USB_LEGOTOWER=y
+CONFIG_USB_LCD=y
+CONFIG_USB_LED=y
+CONFIG_MMC=y
+CONFIG_SDIO_UART=y
+CONFIG_MMC_MVSDIO=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_S35390A=y
+CONFIG_RTC_DRV_MV=y
+CONFIG_DMADEVICES=y
+CONFIG_MV_XOR=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_UTF8=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_DEV_MV_CESA=y
+CONFIG_CRC_CCITT=y
diff --git a/board/sheevaplug/seagatedockstar/patchrootfs.sh b/board/sheevaplug/seagatedockstar/patchrootfs.sh
new file mode 100755
index 0000000..dc5a308
--- /dev/null
+++ b/board/sheevaplug/seagatedockstar/patchrootfs.sh
@@ -0,0 +1,14 @@ 
+#!/bin/bash
+#
+# script which runs before creating rootfs
+#
+#
+MAINDIR=${1}/../../
+SRCDIR=${MAINDIR}"board/sheevaplug/seagatedockstar/skeleton/*"
+DESTDIR=${1}
+echo "patching some stuff in " ${DESTDIR} from ${SRCDIR}
+#echo "DESTDIR " ${DESTDIR}
+#echo "SRCDIR " ${SRCDIR}
+#ls -l ${SRCDIR} ${SRCDIR}"/etc"
+cp -rv ${SRCDIR} ${DESTDIR}
+echo "end of userdefined script before packing rootfs"
diff --git a/board/sheevaplug/seagatedockstar/skeleton/etc/inittab b/board/sheevaplug/seagatedockstar/skeleton/etc/inittab
new file mode 100644
index 0000000..2111d5d
--- /dev/null
+++ b/board/sheevaplug/seagatedockstar/skeleton/etc/inittab
@@ -0,0 +1,46 @@ 
+# /etc/inittab
+#
+# Copyright (C) 2001 Erik Andersen <andersen@codepoet.org>
+#
+# Note: BusyBox init doesn't support runlevels.  The runlevels field is
+# completely ignored by BusyBox init. If you want runlevels, use
+# sysvinit.
+#
+# Format for each entry: <id>:<runlevels>:<action>:<process>
+#
+# id        == tty to run on, or empty for /dev/console
+# runlevels == ignored
+# action    == one of sysinit, respawn, askfirst, wait, and once
+# process   == program to run
+
+# Startup the system
+#null::sysinit:/bin/mount -o remount,rw /
+null::sysinit:/bin/mount -t proc proc /proc
+null::sysinit:/bin/mkdir -p /dev/pts
+null::sysinit:/bin/mount -a
+null::sysinit:/bin/hostname -F /etc/hostname
+# now run any rc scripts
+::sysinit:/etc/init.d/rcS
+
+# Set up a couple of getty's
+#tty1::respawn:/sbin/getty 38400 tty1
+#tty2::respawn:/sbin/getty 38400 tty2
+
+# Put a getty on the serial port
+ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100 # GENERIC_SERIAL
+
+# Logging junk
+null::sysinit:/bin/touch /var/log/messages
+null::respawn:/sbin/syslogd -n -m 0
+null::respawn:/sbin/klogd -n
+tty3::respawn:/usr/bin/tail -f /var/log/messages
+
+# Stuff to do for the 3-finger salute
+::ctrlaltdel:/sbin/reboot
+
+# Stuff to do before rebooting
+null::shutdown:/usr/bin/killall klogd
+null::shutdown:/usr/bin/killall syslogd
+null::shutdown:/bin/umount -a -r
+null::shutdown:/sbin/swapoff -a
+
diff --git a/board/sheevaplug/seagatedockstar/skeleton/etc/shadow b/board/sheevaplug/seagatedockstar/skeleton/etc/shadow
new file mode 100644
index 0000000..ff29c40
--- /dev/null
+++ b/board/sheevaplug/seagatedockstar/skeleton/etc/shadow
@@ -0,0 +1,12 @@ 
+root:$1$LqBi5GdU$mYosovzQVc9h8Szv7dtX0/:0:0:99999:7:::
+bin:*:10933:0:99999:7:::
+daemon:*:10933:0:99999:7:::
+adm:*:10933:0:99999:7:::
+lp:*:10933:0:99999:7:::
+sync:*:10933:0:99999:7:::
+shutdown:*:10933:0:99999:7:::
+halt:*:10933:0:99999:7:::
+uucp:*:10933:0:99999:7:::
+operator:*:10933:0:99999:7:::
+nobody:*:10933:0:99999:7:::
+default::10933:0:99999:7:::
diff --git a/configs/dockstart_defconfig b/configs/dockstart_defconfig
new file mode 100644
index 0000000..4b19aa0
--- /dev/null
+++ b/configs/dockstart_defconfig
@@ -0,0 +1,21 @@ 
+BR2_arm=y
+BR2_arm926t=y
+BR2_JLEVEL=4
+BR2_PACKAGE_GDB=y
+BR2_ENABLE_LOCALE_PURGE=y
+BR2_TOOLCHAIN_BUILDROOT_LARGEFILE=y
+BR2_TOOLCHAIN_BUILDROOT_INET_IPV6=y
+BR2_TOOLCHAIN_BUILDROOT_INET_RPC=y
+BR2_TOOLCHAIN_BUILDROOT_LOCALE=y
+BR2_TOOLCHAIN_BUILDROOT_CXX=y
+BR2_TARGET_GENERIC_HOSTNAME="dockstar"
+BR2_TARGET_GENERIC_ISSUE="Welcome to Dockstar and Buildroot"
+BR2_ROOTFS_POST_BUILD_SCRIPT="$(TOPDIR)/board/sheevaplug/seagatedockstar/patchrootfs.sh"
+BR2_TARGET_ROOTFS_UBIFS=y
+BR2_TARGET_ROOTFS_UBIFS_RT_ZLIB=y
+BR2_TARGET_ROOTFS_UBI=y
+BR2_TARGET_ROOTFS_TAR_GZIP=y
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(topdir)board/sheevaplug/seagatedockstar/linux-3.2plus.config"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y