Message ID | 1356044532-8511-1-git-send-email-quintela@redhat.com |
---|---|
State | New |
Headers | show |
Juan Quintela <quintela@redhat.com> writes: > Hi > > Changes for yesterday: > - Paolo Acked the series > - Rebaso on top of today git (only conflicts were due to header re-shuffle) > > Please pull. > > [20121219] > > This is my queue for migration-thread and patches associated. This > integrates review comments & code for Paolo. This is the subset from > both approachs that we agreed with. rest of patches need more review > and are not here. This breaks migration. Here's my test case: #!/bin/sh gzip -d -c lidb.ssmall.img.gz | \ ~/build/qemu/x86_64-softmmu/qemu-system-x86_64 -cdrom \ ~/isos/OCDC-lucid-Test-Drive-20110523_140333.iso -enable-kvm -m 2G \ -incoming exec:dd With lidb.ssmall.img.gz being generated from a 'migrate exec:dd of=...' from qemu.git just a week or two ago. I can't bisect tonight but can attempt to tomorrow. How has this been tested? I'm a little concerned here about the timing. With the Christmas and New Years holiday we're pretty darn close to soft freeze for 1.4. Has this series gone through a full autotest run with multiple guests? Regards, Anthony Liguori > > Migrating and idle guest with upstwream: > > (qemu) info migrate > capabilities: xbzrle: off > Migration status: completed > total time: 34251 milliseconds > downtime: 492 milliseconds > transferred ram: 762458 kbytes > remaining ram: 0 kbytes > total ram: 14688768 kbytes > duplicate: 3492606 pages > normal: 189762 pages > normal bytes: 759048 kbytes > > with this series of patches. > > (qemu) info migrate > capabilities: xbzrle: off > Migration status: completed > total time: 30712 milliseconds > downtime: 29 milliseconds > transferred ram: 738857 kbytes > remaining ram: 0 kbytes > total ram: 14688768 kbytes > duplicate: 3503423 pages > normal: 176671 pages > normal bytes: 706684 kbytes > > Notice the big difference in downtime. And that is also seen inside > the guest a program that just do an idle loop seeing how "long" it > takes to wait for 10ms. > > with upstream: > > [root@d1 ~]# ./timer > delay of 452 ms > delay of 114 ms > delay of 136 ms > delay of 135 ms > delay of 136 ms > delay of 131 ms > delay of 134 ms > > with this series of patches, wait never takes 100ms, nothing is printed. > > Please pull. > > Thanks, Juan. > > > The following changes since commit 27dd7730582be85c7d4f680f5f71146629809c86: > > Merge remote-tracking branch 'bonzini/header-dirs' into staging (2012-12-19 17:15:39 -0600) > > are available in the git repository at: > > > git://repo.or.cz/qemu/quintela.git thread-20121220.next > > for you to fetch changes up to 9848a40427cd76628d04d918fa4751c542527915: > > migration: merge QEMUFileBuffered into MigrationState (2012-12-20 23:09:40 +0100) > > ---------------------------------------------------------------- > Juan Quintela (25): > migration: include qemu-file.h > migration-fd: remove duplicate include > buffered_file: Move from using a timer to use a thread > migration: make qemu_fopen_ops_buffered() return void > migration: move migration thread init code to migrate_fd_put_ready > migration: make writes blocking > migration: remove unfreeze logic > migration: just lock migrate_fd_put_ready > buffered_file: Unfold the trick to restart generating migration data > buffered_file: don't flush on put buffer > buffered_file: unfold buffered_append in buffered_put_buffer > savevm: New save live migration method: pending > migration: move buffered_file.c code into migration.c > migration: add XFER_LIMIT_RATIO > migration: move migration_fd_put_ready() > migration: Inline qemu_fopen_ops_buffered into migrate_fd_connect > migration: move migration notifier > ram: rename last_block to last_seen_block > ram: Add last_sent_block > memory: introduce memory_region_test_and_clear_dirty > ram: Use memory_region_test_and_clear_dirty > ram: optimize migration bitmap walking > ram: account the amount of transferred ram better > ram: refactor ram_save_block() return value > migration: merge QEMUFileBuffered into MigrationState > > Paolo Bonzini (7): > migration: fix migration_bitmap leak > buffered_file: do not send more than s->bytes_xfer bytes per tick > migration: remove double call to migrate_fd_close > exec: change ramlist from MRU order to a 1-item cache > exec: change RAM list to a TAILQ > exec: sort the memory from biggest to smallest > migration: fix qemu_get_fd for BufferedFile > > Umesh Deshpande (2): > add a version number to ram_list > protect the ramlist with a separate mutex > > Makefile.objs | 3 +- > arch_init.c | 245 +++++++++++++------------- > block-migration.c | 49 ++---- > buffered_file.c | 268 ----------------------------- > buffered_file.h | 22 --- > dump.c | 8 +- > exec.c | 128 +++++++++----- > include/exec/cpu-all.h | 15 +- > include/exec/memory.h | 16 ++ > include/migration/migration.h | 13 +- > include/migration/qemu-file.h | 5 - > include/migration/vmstate.h | 1 + > include/sysemu/sysemu.h | 1 + > memory.c | 16 ++ > memory_mapping.c | 4 +- > migration-exec.c | 3 +- > migration-fd.c | 4 +- > migration-tcp.c | 3 +- > migration-unix.c | 3 +- > migration.c | 390 +++++++++++++++++++++++++++++++----------- > savevm.c | 24 ++- > target-i386/arch_dump.c | 2 +- > 22 files changed, 600 insertions(+), 623 deletions(-) > delete mode 100644 buffered_file.c > delete mode 100644 buffered_file.h
Anthony Liguori <anthony@codemonkey.ws> wrote: > Juan Quintela <quintela@redhat.com> writes: > >> Hi >> >> Changes for yesterday: >> - Paolo Acked the series >> - Rebaso on top of today git (only conflicts were due to header re-shuffle) >> >> Please pull. >> >> [20121219] >> >> This is my queue for migration-thread and patches associated. This >> integrates review comments & code for Paolo. This is the subset from >> both approachs that we agreed with. rest of patches need more review >> and are not here. > > This breaks migration. Here's my test case: > > #!/bin/sh > > gzip -d -c lidb.ssmall.img.gz | \ > ~/build/qemu/x86_64-softmmu/qemu-system-x86_64 -cdrom \ > ~/isos/OCDC-lucid-Test-Drive-20110523_140333.iso -enable-kvm -m 2G \ > -incoming exec:dd > > With lidb.ssmall.img.gz being generated from a 'migrate exec:dd of=...' > from qemu.git just a week or two ago. > > I can't bisect tonight but can attempt to tomorrow. How has this been > tested? I have tested with tcp, load/not-load with guests form 4GB to 16GB RAM. Will test tomorrow with your test case. I didn't tested exec:, though. > > I'm a little concerned here about the timing. With the Christmas > and New Years holiday we're pretty darn close to soft freeze for 1.4. > > Has this series gone through a full autotest run with multiple guests? Will re-test tomorrow with autotest. Sorry, Juan.
Il 21/12/2012 01:27, Anthony Liguori ha scritto: > Juan Quintela <quintela@redhat.com> writes: > >> > Hi >> > >> > Changes for yesterday: >> > - Paolo Acked the series >> > - Rebaso on top of today git (only conflicts were due to header re-shuffle) >> > >> > Please pull. >> > >> > [20121219] >> > >> > This is my queue for migration-thread and patches associated. This >> > integrates review comments & code for Paolo. This is the subset from >> > both approachs that we agreed with. rest of patches need more review >> > and are not here. > This breaks migration. Here's my test case: > > #!/bin/sh > > gzip -d -c lidb.ssmall.img.gz | \ > ~/build/qemu/x86_64-softmmu/qemu-system-x86_64 -cdrom \ > ~/isos/OCDC-lucid-Test-Drive-20110523_140333.iso -enable-kvm -m 2G \ > -incoming exec:dd > > With lidb.ssmall.img.gz being generated from a 'migrate exec:dd of=...' > from qemu.git just a week or two ago. > > I can't bisect tonight but can attempt to tomorrow. How has this been > tested? > > I'm a little concerned here about the timing. With the Christmas > and New Years holiday we're pretty darn close to soft freeze for 1.4. Come on, we're _a month_ from soft freeze. Paolo
Juan Quintela <quintela@redhat.com> wrote: > Anthony Liguori <anthony@codemonkey.ws> wrote: >> Juan Quintela <quintela@redhat.com> writes: >> >>> Hi >>> >>> Changes for yesterday: >>> - Paolo Acked the series >>> - Rebaso on top of today git (only conflicts were due to header re-shuffle) >>> >>> Please pull. >>> >>> [20121219] >>> >>> This is my queue for migration-thread and patches associated. This >>> integrates review comments & code for Paolo. This is the subset from >>> both approachs that we agreed with. rest of patches need more review >>> and are not here. >> >> This breaks migration. Here's my test case: >> >> #!/bin/sh >> >> gzip -d -c lidb.ssmall.img.gz | \ >> ~/build/qemu/x86_64-softmmu/qemu-system-x86_64 -cdrom \ >> ~/isos/OCDC-lucid-Test-Drive-20110523_140333.iso -enable-kvm -m 2G \ >> -incoming exec:dd >> >> With lidb.ssmall.img.gz being generated from a 'migrate exec:dd of=...' >> from qemu.git just a week or two ago. >> >> I can't bisect tonight but can attempt to tomorrow. How has this been >> tested? > > I have tested with tcp, load/not-load with guests form 4GB to 16GB RAM. > Will test tomorrow with your test case. I didn't tested exec:, though. This is failing to me with master, nothing to do with the changes on this thread. Investigating what is going on. Later, Juan.
Juan Quintela <quintela@redhat.com> writes: > Juan Quintela <quintela@redhat.com> wrote: >> Anthony Liguori <anthony@codemonkey.ws> wrote: >>> Juan Quintela <quintela@redhat.com> writes: >>> >>>> Hi >>>> >>>> Changes for yesterday: >>>> - Paolo Acked the series >>>> - Rebaso on top of today git (only conflicts were due to header re-shuffle) >>>> >>>> Please pull. >>>> >>>> [20121219] >>>> >>>> This is my queue for migration-thread and patches associated. This >>>> integrates review comments & code for Paolo. This is the subset from >>>> both approachs that we agreed with. rest of patches need more review >>>> and are not here. >>> >>> This breaks migration. Here's my test case: >>> >>> #!/bin/sh >>> >>> gzip -d -c lidb.ssmall.img.gz | \ >>> ~/build/qemu/x86_64-softmmu/qemu-system-x86_64 -cdrom \ >>> ~/isos/OCDC-lucid-Test-Drive-20110523_140333.iso -enable-kvm -m 2G \ >>> -incoming exec:dd >>> >>> With lidb.ssmall.img.gz being generated from a 'migrate exec:dd of=...' >>> from qemu.git just a week or two ago. >>> >>> I can't bisect tonight but can attempt to tomorrow. How has this been >>> tested? >> >> I have tested with tcp, load/not-load with guests form 4GB to 16GB RAM. >> Will test tomorrow with your test case. I didn't tested exec:, though. > > This is failing to me with master, nothing to do with the changes on > this thread. Investigating what is going on. Master works perfectly fine for me. It only fails with your series merged in. I can bisect if you like. Regards, Anthony Liguori > > Later, Juan.
Anthony Liguori <anthony@codemonkey.ws> writes: > Juan Quintela <quintela@redhat.com> writes: > >> Hi >> >> Changes for yesterday: >> - Paolo Acked the series >> - Rebaso on top of today git (only conflicts were due to header re-shuffle) >> >> Please pull. >> >> [20121219] >> >> This is my queue for migration-thread and patches associated. This >> integrates review comments & code for Paolo. This is the subset from >> both approachs that we agreed with. rest of patches need more review >> and are not here. > > This breaks migration. Here's my test case: > > #!/bin/sh > > gzip -d -c lidb.ssmall.img.gz | \ > ~/build/qemu/x86_64-softmmu/qemu-system-x86_64 -cdrom \ > ~/isos/OCDC-lucid-Test-Drive-20110523_140333.iso -enable-kvm -m 2G \ > -incoming exec:dd > > With lidb.ssmall.img.gz being generated from a 'migrate exec:dd of=...' > from qemu.git just a week or two ago. > > I can't bisect tonight but can attempt to tomorrow. How has this been > tested? > > I'm a little concerned here about the timing. With the Christmas > and New Years holiday we're pretty darn close to soft freeze for 1.4. > > Has this series gone through a full autotest run with multiple guests? FYI, I'm having a heck of a time reproducing now attempting to do a bisect. This could indicate either a lingering build dependency problem or even that I merged the wrong branch previously. I'll keep testing and trying to reproduce. I still would like to see a full autotest run here though. Regards, Anthony Liguori > > Regards, > > Anthony Liguori > >> >> Migrating and idle guest with upstwream: >> >> (qemu) info migrate >> capabilities: xbzrle: off >> Migration status: completed >> total time: 34251 milliseconds >> downtime: 492 milliseconds >> transferred ram: 762458 kbytes >> remaining ram: 0 kbytes >> total ram: 14688768 kbytes >> duplicate: 3492606 pages >> normal: 189762 pages >> normal bytes: 759048 kbytes >> >> with this series of patches. >> >> (qemu) info migrate >> capabilities: xbzrle: off >> Migration status: completed >> total time: 30712 milliseconds >> downtime: 29 milliseconds >> transferred ram: 738857 kbytes >> remaining ram: 0 kbytes >> total ram: 14688768 kbytes >> duplicate: 3503423 pages >> normal: 176671 pages >> normal bytes: 706684 kbytes >> >> Notice the big difference in downtime. And that is also seen inside >> the guest a program that just do an idle loop seeing how "long" it >> takes to wait for 10ms. >> >> with upstream: >> >> [root@d1 ~]# ./timer >> delay of 452 ms >> delay of 114 ms >> delay of 136 ms >> delay of 135 ms >> delay of 136 ms >> delay of 131 ms >> delay of 134 ms >> >> with this series of patches, wait never takes 100ms, nothing is printed. >> >> Please pull. >> >> Thanks, Juan. >> >> >> The following changes since commit 27dd7730582be85c7d4f680f5f71146629809c86: >> >> Merge remote-tracking branch 'bonzini/header-dirs' into staging (2012-12-19 17:15:39 -0600) >> >> are available in the git repository at: >> >> >> git://repo.or.cz/qemu/quintela.git thread-20121220.next >> >> for you to fetch changes up to 9848a40427cd76628d04d918fa4751c542527915: >> >> migration: merge QEMUFileBuffered into MigrationState (2012-12-20 23:09:40 +0100) >> >> ---------------------------------------------------------------- >> Juan Quintela (25): >> migration: include qemu-file.h >> migration-fd: remove duplicate include >> buffered_file: Move from using a timer to use a thread >> migration: make qemu_fopen_ops_buffered() return void >> migration: move migration thread init code to migrate_fd_put_ready >> migration: make writes blocking >> migration: remove unfreeze logic >> migration: just lock migrate_fd_put_ready >> buffered_file: Unfold the trick to restart generating migration data >> buffered_file: don't flush on put buffer >> buffered_file: unfold buffered_append in buffered_put_buffer >> savevm: New save live migration method: pending >> migration: move buffered_file.c code into migration.c >> migration: add XFER_LIMIT_RATIO >> migration: move migration_fd_put_ready() >> migration: Inline qemu_fopen_ops_buffered into migrate_fd_connect >> migration: move migration notifier >> ram: rename last_block to last_seen_block >> ram: Add last_sent_block >> memory: introduce memory_region_test_and_clear_dirty >> ram: Use memory_region_test_and_clear_dirty >> ram: optimize migration bitmap walking >> ram: account the amount of transferred ram better >> ram: refactor ram_save_block() return value >> migration: merge QEMUFileBuffered into MigrationState >> >> Paolo Bonzini (7): >> migration: fix migration_bitmap leak >> buffered_file: do not send more than s->bytes_xfer bytes per tick >> migration: remove double call to migrate_fd_close >> exec: change ramlist from MRU order to a 1-item cache >> exec: change RAM list to a TAILQ >> exec: sort the memory from biggest to smallest >> migration: fix qemu_get_fd for BufferedFile >> >> Umesh Deshpande (2): >> add a version number to ram_list >> protect the ramlist with a separate mutex >> >> Makefile.objs | 3 +- >> arch_init.c | 245 +++++++++++++------------- >> block-migration.c | 49 ++---- >> buffered_file.c | 268 ----------------------------- >> buffered_file.h | 22 --- >> dump.c | 8 +- >> exec.c | 128 +++++++++----- >> include/exec/cpu-all.h | 15 +- >> include/exec/memory.h | 16 ++ >> include/migration/migration.h | 13 +- >> include/migration/qemu-file.h | 5 - >> include/migration/vmstate.h | 1 + >> include/sysemu/sysemu.h | 1 + >> memory.c | 16 ++ >> memory_mapping.c | 4 +- >> migration-exec.c | 3 +- >> migration-fd.c | 4 +- >> migration-tcp.c | 3 +- >> migration-unix.c | 3 +- >> migration.c | 390 +++++++++++++++++++++++++++++++----------- >> savevm.c | 24 ++- >> target-i386/arch_dump.c | 2 +- >> 22 files changed, 600 insertions(+), 623 deletions(-) >> delete mode 100644 buffered_file.c >> delete mode 100644 buffered_file.h
Il 21/12/2012 01:27, Anthony Liguori ha scritto: > #!/bin/sh > > gzip -d -c lidb.ssmall.img.gz | \ > ~/build/qemu/x86_64-softmmu/qemu-system-x86_64 -cdrom \ > ~/isos/OCDC-lucid-Test-Drive-20110523_140333.iso -enable-kvm -m 2G \ > -incoming exec:dd > > With lidb.ssmall.img.gz being generated from a 'migrate exec:dd of=...' > from qemu.git just a week or two ago. So it breaks *incoming* migration, which would restrict the problem to the beginning of the patch (reorganization of the RAM block list). Everything else touches only outgoing migration. However, I tested bidirectional migration between origin/master and Juan's branch and it passed x86_64-softmmu/qemu-system-x86_64 \ -drive if=virtio,cache=none,file=/../images/jeos-17-64.qcow2 \ -vnc :1 -incoming "exec:cat foo" --enable-kvm I also tested both my and Juan's branches and they both pass all migration tests. > I can't bisect tonight but can attempt to tomorrow. How has this been > tested? Indeed old->new and new->old migration wasn't tested AFAIK. Not by me at least. Paolo > I'm a little concerned here about the timing. With the Christmas > and New Years holiday we're pretty darn close to soft freeze for 1.4. > > Has this series gone through a full autotest run with multiple guests?
Juan Quintela <quintela@redhat.com> wrote: > Anthony Liguori <anthony@codemonkey.ws> wrote: >> Juan Quintela <quintela@redhat.com> writes: >> >>> Hi >>> >>> Changes for yesterday: >>> - Paolo Acked the series >>> - Rebaso on top of today git (only conflicts were due to header re-shuffle) >>> >>> Please pull. >>> >>> [20121219] >>> >>> This is my queue for migration-thread and patches associated. This >>> integrates review comments & code for Paolo. This is the subset from >>> both approachs that we agreed with. rest of patches need more review >>> and are not here. >> >> This breaks migration. Here's my test case: >> >> #!/bin/sh >> >> gzip -d -c lidb.ssmall.img.gz | \ >> ~/build/qemu/x86_64-softmmu/qemu-system-x86_64 -cdrom \ >> ~/isos/OCDC-lucid-Test-Drive-20110523_140333.iso -enable-kvm -m 2G \ >> -incoming exec:dd >> >> With lidb.ssmall.img.gz being generated from a 'migrate exec:dd of=...' >> from qemu.git just a week or two ago. >> >> I can't bisect tonight but can attempt to tomorrow. How has this been >> tested? > > I have tested with tcp, load/not-load with guests form 4GB to 16GB RAM. > Will test tomorrow with your test case. I didn't tested exec:, though. > >> >> I'm a little concerned here about the timing. With the Christmas >> and New Years holiday we're pretty darn close to soft freeze for 1.4. >> >> Has this series gone through a full autotest run with multiple guests? > > Will re-test tomorrow with autotest. Tested with autotest, it worked both upstream and the pull request. Anthony, any news about your problems? Can you pull the series? Or do you preffer that I integrate Paolo fixes in the middle and sent another pull request? Thanks, Juan.
Juan Quintela <quintela@redhat.com> writes: > Hi > > Changes for yesterday: > - Paolo Acked the series > - Rebaso on top of today git (only conflicts were due to header re-shuffle) > > Please pull. Pulled. Thanks. Regards, Anthony Liguori > > [20121219] > > This is my queue for migration-thread and patches associated. This > integrates review comments & code for Paolo. This is the subset from > both approachs that we agreed with. rest of patches need more review > and are not here. > > Migrating and idle guest with upstwream: > > (qemu) info migrate > capabilities: xbzrle: off > Migration status: completed > total time: 34251 milliseconds > downtime: 492 milliseconds > transferred ram: 762458 kbytes > remaining ram: 0 kbytes > total ram: 14688768 kbytes > duplicate: 3492606 pages > normal: 189762 pages > normal bytes: 759048 kbytes > > with this series of patches. > > (qemu) info migrate > capabilities: xbzrle: off > Migration status: completed > total time: 30712 milliseconds > downtime: 29 milliseconds > transferred ram: 738857 kbytes > remaining ram: 0 kbytes > total ram: 14688768 kbytes > duplicate: 3503423 pages > normal: 176671 pages > normal bytes: 706684 kbytes > > Notice the big difference in downtime. And that is also seen inside > the guest a program that just do an idle loop seeing how "long" it > takes to wait for 10ms. > > with upstream: > > [root@d1 ~]# ./timer > delay of 452 ms > delay of 114 ms > delay of 136 ms > delay of 135 ms > delay of 136 ms > delay of 131 ms > delay of 134 ms > > with this series of patches, wait never takes 100ms, nothing is printed. > > Please pull. > > Thanks, Juan. > > > The following changes since commit 27dd7730582be85c7d4f680f5f71146629809c86: > > Merge remote-tracking branch 'bonzini/header-dirs' into staging (2012-12-19 17:15:39 -0600) > > are available in the git repository at: > > > git://repo.or.cz/qemu/quintela.git thread-20121220.next > > for you to fetch changes up to 9848a40427cd76628d04d918fa4751c542527915: > > migration: merge QEMUFileBuffered into MigrationState (2012-12-20 > 23:09:40 +0100) > > ---------------------------------------------------------------- > Juan Quintela (25): > migration: include qemu-file.h > migration-fd: remove duplicate include > buffered_file: Move from using a timer to use a thread > migration: make qemu_fopen_ops_buffered() return void > migration: move migration thread init code to migrate_fd_put_ready > migration: make writes blocking > migration: remove unfreeze logic > migration: just lock migrate_fd_put_ready > buffered_file: Unfold the trick to restart generating migration data > buffered_file: don't flush on put buffer > buffered_file: unfold buffered_append in buffered_put_buffer > savevm: New save live migration method: pending > migration: move buffered_file.c code into migration.c > migration: add XFER_LIMIT_RATIO > migration: move migration_fd_put_ready() > migration: Inline qemu_fopen_ops_buffered into migrate_fd_connect > migration: move migration notifier > ram: rename last_block to last_seen_block > ram: Add last_sent_block > memory: introduce memory_region_test_and_clear_dirty > ram: Use memory_region_test_and_clear_dirty > ram: optimize migration bitmap walking > ram: account the amount of transferred ram better > ram: refactor ram_save_block() return value > migration: merge QEMUFileBuffered into MigrationState > > Paolo Bonzini (7): > migration: fix migration_bitmap leak > buffered_file: do not send more than s->bytes_xfer bytes per tick > migration: remove double call to migrate_fd_close > exec: change ramlist from MRU order to a 1-item cache > exec: change RAM list to a TAILQ > exec: sort the memory from biggest to smallest > migration: fix qemu_get_fd for BufferedFile > > Umesh Deshpande (2): > add a version number to ram_list > protect the ramlist with a separate mutex > > Makefile.objs | 3 +- > arch_init.c | 245 +++++++++++++------------- > block-migration.c | 49 ++---- > buffered_file.c | 268 ----------------------------- > buffered_file.h | 22 --- > dump.c | 8 +- > exec.c | 128 +++++++++----- > include/exec/cpu-all.h | 15 +- > include/exec/memory.h | 16 ++ > include/migration/migration.h | 13 +- > include/migration/qemu-file.h | 5 - > include/migration/vmstate.h | 1 + > include/sysemu/sysemu.h | 1 + > memory.c | 16 ++ > memory_mapping.c | 4 +- > migration-exec.c | 3 +- > migration-fd.c | 4 +- > migration-tcp.c | 3 +- > migration-unix.c | 3 +- > migration.c | 390 +++++++++++++++++++++++++++++++----------- > savevm.c | 24 ++- > target-i386/arch_dump.c | 2 +- > 22 files changed, 600 insertions(+), 623 deletions(-) > delete mode 100644 buffered_file.c > delete mode 100644 buffered_file.h