Patchwork [U-Boot,V3,4/4] EXYNOS5: Add support for FIMD and DP

login
register
mail settings
Submitter Ajay Kumar
Date Dec. 20, 2012, 12:35 p.m.
Message ID <1356006906-31510-5-git-send-email-ajaykumar.rs@samsung.com>
Download mbox | patch
Permalink /patch/207659/
State Changes Requested
Delegated to: Minkyu Kang
Headers show

Comments

Ajay Kumar - Dec. 20, 2012, 12:35 p.m.
Add panel_info structure required by LCD driver
and DP panel platdata for SMDK5250.
Add GPIO configuration for LCD.
Enable FIMD and DP support on SMDK5250.
DP Panel size: 2560x1600.
We use 16BPP resolution to get LCD console.

Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
---
 board/samsung/smdk5250/smdk5250.c |   97 +++++++++++++++++++++++++++++++++++++
 include/configs/smdk5250.h        |    8 +++
 2 files changed, 105 insertions(+), 0 deletions(-)
Simon Glass - Dec. 20, 2012, 8:47 p.m.
On Thu, Dec 20, 2012 at 4:35 AM, Ajay Kumar <ajaykumar.rs@samsung.com>wrote:

> Add panel_info structure required by LCD driver
> and DP panel platdata for SMDK5250.
> Add GPIO configuration for LCD.
> Enable FIMD and DP support on SMDK5250.
> DP Panel size: 2560x1600.
> We use 16BPP resolution to get LCD console.
>
> Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
>

Acked-by: Simon Glass <sjg@chomium.org>


> ---
>  board/samsung/smdk5250/smdk5250.c |   97
> +++++++++++++++++++++++++++++++++++++
>  include/configs/smdk5250.h        |    8 +++
>  2 files changed, 105 insertions(+), 0 deletions(-)
>
> diff --git a/board/samsung/smdk5250/smdk5250.c
> b/board/samsung/smdk5250/smdk5250.c
> index 4c50342..46fd2a5 100644
> --- a/board/samsung/smdk5250/smdk5250.c
> +++ b/board/samsung/smdk5250/smdk5250.c
> @@ -24,12 +24,15 @@
>  #include <asm/io.h>
>  #include <i2c.h>
>  #include <netdev.h>
> +#include <lcd.h>
>  #include <spi.h>
>  #include <asm/arch/cpu.h>
>  #include <asm/arch/gpio.h>
>  #include <asm/arch/mmc.h>
> +#include <asm/arch/power.h>
>  #include <asm/arch/pinmux.h>
>  #include <asm/arch/sromc.h>
> +#include <asm/arch/dp_info.h>
>  #include <pmic.h>
>
>  DECLARE_GLOBAL_DATA_PTR;
> @@ -181,6 +184,100 @@ static int board_uart_init(void)
>         return 0;
>  }
>
> +void cfg_lcd_gpio(void)
> +{
> +       struct exynos5_gpio_part1 *gpio1 =
> +               (struct exynos5_gpio_part1 *)
> samsung_get_base_gpio_part1();
> +
> +       /* For Backlight */
> +       s5p_gpio_cfg_pin(&gpio1->b2, 0, GPIO_OUTPUT);
> +       s5p_gpio_set_value(&gpio1->b2, 0, 1);
> +
> +       /* LCD power on */
> +       s5p_gpio_cfg_pin(&gpio1->x1, 5, GPIO_OUTPUT);
> +       s5p_gpio_set_value(&gpio1->x1, 5, 1);
> +
> +       /* Set Hotplug detect for DP */
> +       s5p_gpio_cfg_pin(&gpio1->x0, 7, GPIO_FUNC(0x3));
> +}
> +
> +vidinfo_t panel_info = {
> +       .vl_freq        = 60,
> +       .vl_col         = 2560,
> +       .vl_row         = 1600,
> +       .vl_width       = 2560,
> +       .vl_height      = 1600,
> +       .vl_clkp        = CONFIG_SYS_LOW,
> +       .vl_hsp         = CONFIG_SYS_LOW,
> +       .vl_vsp         = CONFIG_SYS_LOW,
> +       .vl_dp          = CONFIG_SYS_LOW,
> +       .vl_bpix        = 4,    /* LCD_BPP = 2^4, for output conosle on
> LCD */
> +
> +       /* wDP panel timing infomation */
> +       .vl_hspw        = 32,
> +       .vl_hbpd        = 80,
> +       .vl_hfpd        = 48,
> +
> +       .vl_vspw        = 6,
> +       .vl_vbpd        = 37,
> +       .vl_vfpd        = 3,
> +       .vl_cmd_allow_len = 0xf,
> +
> +       .win_id         = 3,
> +       .cfg_gpio       = cfg_lcd_gpio,
> +       .backlight_on   = NULL,
> +       .lcd_power_on   = NULL,
> +       .reset_lcd      = NULL,
> +       .dual_lcd_enabled = 0,
> +
> +       .init_delay     = 0,
> +       .power_on_delay = 0,
> +       .reset_delay    = 0,
> +       .interface_mode = FIMD_RGB_INTERFACE,
> +       .dp_enabled     = 1,
> +};
> +
> +static struct edp_device_info edp_info = {
> +       .disp_info = {
> +               .h_res = 2560,
> +               .h_sync_width = 32,
> +               .h_back_porch = 80,
> +               .h_front_porch = 48,
> +               .v_res = 1600,
> +               .v_sync_width  = 6,
> +               .v_back_porch = 37,
> +               .v_front_porch = 3,
> +               .v_sync_rate = 60,
> +       },
> +       .lt_info = {
> +               .lt_status = DP_LT_NONE,
> +       },
> +       .video_info = {
> +               .master_mode = 0,
> +               .bist_mode = DP_DISABLE,
> +               .bist_pattern = NO_PATTERN,
> +               .h_sync_polarity = 0,
> +               .v_sync_polarity = 0,
> +               .interlaced = 0,
> +               .color_space = COLOR_RGB,
> +               .dynamic_range = VESA,
> +               .ycbcr_coeff = COLOR_YCBCR601,
> +               .color_depth = COLOR_8,
> +       },
> +};
> +
> +static struct exynos_dp_platform_data dp_platform_data = {
> +       .phy_enable     = set_dp_phy_ctrl,
> +       .edp_dev_info   = &edp_info,
> +};
> +
> +void init_panel_info(vidinfo_t *vid)
> +{
> +       vid->rgb_mode   = MODE_RGB_P,
> +
> +       exynos_set_dp_platform_data(&dp_platform_data);
> +}
> +
>  #ifdef CONFIG_SYS_I2C_INIT_BOARD
>  static int board_i2c_init(void)
>  {
> diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h
> index e412da8..a9b3b8b 100644
> --- a/include/configs/smdk5250.h
> +++ b/include/configs/smdk5250.h
> @@ -256,6 +256,14 @@
>  #define CONFIG_SOUND_WM8994
>  #endif
>
> +/* Display */
> +#define CONFIG_LCD
> +#define CONFIG_EXYNOS_FB
> +#define CONFIG_EXYNOS_DP
> +#define LCD_XRES                       2560
> +#define LCD_YRES                       1600
> +#define LCD_BPP                        LCD_COLOR16
> +
>  /* Enable devicetree support */
>  #define CONFIG_OF_LIBFDT
>
> --
> 1.7.1
>
>

Patch

diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c
index 4c50342..46fd2a5 100644
--- a/board/samsung/smdk5250/smdk5250.c
+++ b/board/samsung/smdk5250/smdk5250.c
@@ -24,12 +24,15 @@ 
 #include <asm/io.h>
 #include <i2c.h>
 #include <netdev.h>
+#include <lcd.h>
 #include <spi.h>
 #include <asm/arch/cpu.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/mmc.h>
+#include <asm/arch/power.h>
 #include <asm/arch/pinmux.h>
 #include <asm/arch/sromc.h>
+#include <asm/arch/dp_info.h>
 #include <pmic.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -181,6 +184,100 @@  static int board_uart_init(void)
 	return 0;
 }
 
+void cfg_lcd_gpio(void)
+{
+	struct exynos5_gpio_part1 *gpio1 =
+		(struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
+
+	/* For Backlight */
+	s5p_gpio_cfg_pin(&gpio1->b2, 0, GPIO_OUTPUT);
+	s5p_gpio_set_value(&gpio1->b2, 0, 1);
+
+	/* LCD power on */
+	s5p_gpio_cfg_pin(&gpio1->x1, 5, GPIO_OUTPUT);
+	s5p_gpio_set_value(&gpio1->x1, 5, 1);
+
+	/* Set Hotplug detect for DP */
+	s5p_gpio_cfg_pin(&gpio1->x0, 7, GPIO_FUNC(0x3));
+}
+
+vidinfo_t panel_info = {
+	.vl_freq	= 60,
+	.vl_col		= 2560,
+	.vl_row		= 1600,
+	.vl_width	= 2560,
+	.vl_height	= 1600,
+	.vl_clkp	= CONFIG_SYS_LOW,
+	.vl_hsp		= CONFIG_SYS_LOW,
+	.vl_vsp		= CONFIG_SYS_LOW,
+	.vl_dp		= CONFIG_SYS_LOW,
+	.vl_bpix	= 4,	/* LCD_BPP = 2^4, for output conosle on LCD */
+
+	/* wDP panel timing infomation */
+	.vl_hspw	= 32,
+	.vl_hbpd	= 80,
+	.vl_hfpd	= 48,
+
+	.vl_vspw	= 6,
+	.vl_vbpd	= 37,
+	.vl_vfpd	= 3,
+	.vl_cmd_allow_len = 0xf,
+
+	.win_id		= 3,
+	.cfg_gpio	= cfg_lcd_gpio,
+	.backlight_on	= NULL,
+	.lcd_power_on	= NULL,
+	.reset_lcd	= NULL,
+	.dual_lcd_enabled = 0,
+
+	.init_delay	= 0,
+	.power_on_delay = 0,
+	.reset_delay	= 0,
+	.interface_mode = FIMD_RGB_INTERFACE,
+	.dp_enabled	= 1,
+};
+
+static struct edp_device_info edp_info = {
+	.disp_info = {
+		.h_res = 2560,
+		.h_sync_width = 32,
+		.h_back_porch = 80,
+		.h_front_porch = 48,
+		.v_res = 1600,
+		.v_sync_width  = 6,
+		.v_back_porch = 37,
+		.v_front_porch = 3,
+		.v_sync_rate = 60,
+	},
+	.lt_info = {
+		.lt_status = DP_LT_NONE,
+	},
+	.video_info = {
+		.master_mode = 0,
+		.bist_mode = DP_DISABLE,
+		.bist_pattern = NO_PATTERN,
+		.h_sync_polarity = 0,
+		.v_sync_polarity = 0,
+		.interlaced = 0,
+		.color_space = COLOR_RGB,
+		.dynamic_range = VESA,
+		.ycbcr_coeff = COLOR_YCBCR601,
+		.color_depth = COLOR_8,
+	},
+};
+
+static struct exynos_dp_platform_data dp_platform_data = {
+	.phy_enable	= set_dp_phy_ctrl,
+	.edp_dev_info	= &edp_info,
+};
+
+void init_panel_info(vidinfo_t *vid)
+{
+	vid->rgb_mode   = MODE_RGB_P,
+
+	exynos_set_dp_platform_data(&dp_platform_data);
+}
+
 #ifdef CONFIG_SYS_I2C_INIT_BOARD
 static int board_i2c_init(void)
 {
diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h
index e412da8..a9b3b8b 100644
--- a/include/configs/smdk5250.h
+++ b/include/configs/smdk5250.h
@@ -256,6 +256,14 @@ 
 #define CONFIG_SOUND_WM8994
 #endif
 
+/* Display */
+#define CONFIG_LCD
+#define CONFIG_EXYNOS_FB
+#define CONFIG_EXYNOS_DP
+#define LCD_XRES			2560
+#define LCD_YRES			1600
+#define LCD_BPP			LCD_COLOR16
+
 /* Enable devicetree support */
 #define CONFIG_OF_LIBFDT