diff mbox

[RFC,V8,13/15] virtio : Remove the function pointer.

Message ID 1355910821-21302-14-git-send-email-fred.konrad@greensocs.com
State New
Headers show

Commit Message

fred.konrad@greensocs.com Dec. 19, 2012, 9:53 a.m. UTC 
From: KONRAD Frederic <fred.konrad@greensocs.com>

This remove the function pointer in VirtIODevice, and use only
VirtioDeviceClass function pointer. It should be applied after all
the device have been refactored.

Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
---
 hw/virtio-blk.c |  5 -----
 hw/virtio-pci.c |  2 +-
 hw/virtio.c     | 41 ++++++++++++++++++++++++++---------------
 hw/virtio.h     | 12 ------------
 4 files changed, 27 insertions(+), 33 deletions(-)

Comments

Blue Swirl Dec. 19, 2012, 7:50 p.m. UTC | #1 
On Wed, Dec 19, 2012 at 9:53 AM,  <fred.konrad@greensocs.com> wrote:
> From: KONRAD Frederic <fred.konrad@greensocs.com>
>
> This remove the function pointer in VirtIODevice, and use only
> VirtioDeviceClass function pointer. It should be applied after all
> the device have been refactored.
>
> Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
> ---
>  hw/virtio-blk.c |  5 -----
>  hw/virtio-pci.c |  2 +-
>  hw/virtio.c     | 41 ++++++++++++++++++++++++++---------------
>  hw/virtio.h     | 12 ------------
>  4 files changed, 27 insertions(+), 33 deletions(-)
>
> diff --git a/hw/virtio-blk.c b/hw/virtio-blk.c
> index 65932fd..fbb829e 100644
> --- a/hw/virtio-blk.c
> +++ b/hw/virtio-blk.c
> @@ -628,11 +628,6 @@ static int virtio_blk_device_init(VirtIODevice *vdev)
>      virtio_init(vdev, "virtio-blk", VIRTIO_ID_BLOCK,
>                  sizeof(struct virtio_blk_config));
>
> -    vdev->get_config = virtio_blk_update_config;
> -    vdev->set_config = virtio_blk_set_config;
> -    vdev->get_features = virtio_blk_get_features;
> -    vdev->set_status = virtio_blk_set_status;
> -    vdev->reset = virtio_blk_reset;
>      s->bs = blk->conf.bs;
>      s->conf = &blk->conf;
>      virtio_blk_set_conf(qdev, blk);
> diff --git a/hw/virtio-pci.c b/hw/virtio-pci.c
> index e3a8276..cdc3473 100644
> --- a/hw/virtio-pci.c
> +++ b/hw/virtio-pci.c
> @@ -262,7 +262,7 @@ static void virtio_ioport_write(void *opaque, uint32_t addr, uint32_t val)
>      case VIRTIO_PCI_GUEST_FEATURES:
>         /* Guest does not negotiate properly?  We have to assume nothing. */
>         if (val & (1 << VIRTIO_F_BAD_FEATURE)) {
> -            val = vdev->bad_features ? vdev->bad_features(vdev) : 0;
> +            val = get_virtio_device_bad_features(proxy->bus);
>         }
>          virtio_set_features(vdev, val);
>          break;
> diff --git a/hw/virtio.c b/hw/virtio.c
> index e40fa12..82bf3dd 100644
> --- a/hw/virtio.c
> +++ b/hw/virtio.c
> @@ -517,10 +517,11 @@ void virtio_update_irq(VirtIODevice *vdev)
>
>  void virtio_set_status(VirtIODevice *vdev, uint8_t val)
>  {
> +    VirtioDeviceClass *k = VIRTIO_DEVICE_GET_CLASS(vdev);
>      trace_virtio_set_status(vdev, val);
>
> -    if (vdev->set_status) {
> -        vdev->set_status(vdev, val);
> +    if (k->set_status) {
> +        k->set_status(vdev, val);
>      }
>      vdev->status = val;
>  }
> @@ -528,12 +529,14 @@ void virtio_set_status(VirtIODevice *vdev, uint8_t val)
>  void virtio_reset(void *opaque)
>  {
>      VirtIODevice *vdev = opaque;
> +    VirtioDeviceClass *k = VIRTIO_DEVICE_GET_CLASS(vdev);
>      int i;
>
>      virtio_set_status(vdev, 0);
>
> -    if (vdev->reset)
> -        vdev->reset(vdev);
> +    if (k->reset) {
> +        k->reset(vdev);
> +    }
>
>      vdev->guest_features = 0;
>      vdev->queue_sel = 0;
> @@ -557,9 +560,10 @@ void virtio_reset(void *opaque)
>
>  uint32_t virtio_config_readb(VirtIODevice *vdev, uint32_t addr)
>  {
> +    VirtioDeviceClass *k = VIRTIO_DEVICE_GET_CLASS(vdev);
>      uint8_t val;
>
> -    vdev->get_config(vdev, vdev->config);
> +    k->get_config(vdev, vdev->config);
>
>      if (addr > (vdev->config_len - sizeof(val)))
>          return (uint32_t)-1;
> @@ -570,9 +574,10 @@ uint32_t virtio_config_readb(VirtIODevice *vdev, uint32_t addr)
>
>  uint32_t virtio_config_readw(VirtIODevice *vdev, uint32_t addr)
>  {
> +    VirtioDeviceClass *k = VIRTIO_DEVICE_GET_CLASS(vdev);
>      uint16_t val;
>
> -    vdev->get_config(vdev, vdev->config);
> +    k->get_config(vdev, vdev->config);
>
>      if (addr > (vdev->config_len - sizeof(val)))
>          return (uint32_t)-1;
> @@ -583,9 +588,10 @@ uint32_t virtio_config_readw(VirtIODevice *vdev, uint32_t addr)
>
>  uint32_t virtio_config_readl(VirtIODevice *vdev, uint32_t addr)
>  {
> +    VirtioDeviceClass *k = VIRTIO_DEVICE_GET_CLASS(vdev);
>      uint32_t val;
>
> -    vdev->get_config(vdev, vdev->config);
> +    k->get_config(vdev, vdev->config);
>
>      if (addr > (vdev->config_len - sizeof(val)))
>          return (uint32_t)-1;
> @@ -596,6 +602,7 @@ uint32_t virtio_config_readl(VirtIODevice *vdev, uint32_t addr)
>
>  void virtio_config_writeb(VirtIODevice *vdev, uint32_t addr, uint32_t data)
>  {
> +    VirtioDeviceClass *k = VIRTIO_DEVICE_GET_CLASS(vdev);
>      uint8_t val = data;
>
>      if (addr > (vdev->config_len - sizeof(val)))
> @@ -603,12 +610,13 @@ void virtio_config_writeb(VirtIODevice *vdev, uint32_t addr, uint32_t data)
>
>      stb_p(vdev->config + addr, val);
>
> -    if (vdev->set_config)
> -        vdev->set_config(vdev, vdev->config);
> +    if (k->set_config)

Missing braces, please use checkpatch.pl.

> +        k->set_config(vdev, vdev->config);
>  }
>
>  void virtio_config_writew(VirtIODevice *vdev, uint32_t addr, uint32_t data)
>  {
> +    VirtioDeviceClass *k = VIRTIO_DEVICE_GET_CLASS(vdev);
>      uint16_t val = data;
>
>      if (addr > (vdev->config_len - sizeof(val)))
> @@ -616,12 +624,13 @@ void virtio_config_writew(VirtIODevice *vdev, uint32_t addr, uint32_t data)
>
>      stw_p(vdev->config + addr, val);
>
> -    if (vdev->set_config)
> -        vdev->set_config(vdev, vdev->config);
> +    if (k->set_config)

Ditto.

> +        k->set_config(vdev, vdev->config);
>  }
>
>  void virtio_config_writel(VirtIODevice *vdev, uint32_t addr, uint32_t data)
>  {
> +    VirtioDeviceClass *k = VIRTIO_DEVICE_GET_CLASS(vdev);
>      uint32_t val = data;
>
>      if (addr > (vdev->config_len - sizeof(val)))
> @@ -629,8 +638,9 @@ void virtio_config_writel(VirtIODevice *vdev, uint32_t addr, uint32_t data)
>
>      stl_p(vdev->config + addr, val);
>
> -    if (vdev->set_config)
> -        vdev->set_config(vdev, vdev->config);
> +    if (k->set_config) {
> +        k->set_config(vdev, vdev->config);
> +    }
>  }
>
>  void virtio_queue_set_addr(VirtIODevice *vdev, int n, hwaddr addr)
> @@ -799,13 +809,14 @@ void virtio_save(VirtIODevice *vdev, QEMUFile *f)
>
>  int virtio_set_features(VirtIODevice *vdev, uint32_t val)
>  {
> +    VirtioDeviceClass *k = VIRTIO_DEVICE_GET_CLASS(vdev);
>      uint32_t supported_features =
>          vdev->binding->get_features(vdev->binding_opaque);
>      bool bad = (val & ~supported_features) != 0;
>
>      val &= supported_features;
> -    if (vdev->set_features) {
> -        vdev->set_features(vdev, val);
> +    if (k->set_features) {
> +        k->set_features(vdev, val);
>      }
>      vdev->guest_features = val;
>      return bad ? -1 : 0;
> diff --git a/hw/virtio.h b/hw/virtio.h
> index 98596a9..857fd78 100644
> --- a/hw/virtio.h
> +++ b/hw/virtio.h
> @@ -128,18 +128,6 @@ struct VirtIODevice
>      void *config;
>      uint16_t config_vector;
>      int nvectors;
> -    /*
> -     * Will be removed ( at the end of the series ) as we have it in
> -     * VirtioDeviceClass.
> -     */
> -    uint32_t (*get_features)(VirtIODevice *vdev, uint32_t requested_features);
> -    uint32_t (*bad_features)(VirtIODevice *vdev);
> -    void (*set_features)(VirtIODevice *vdev, uint32_t val);
> -    void (*get_config)(VirtIODevice *vdev, uint8_t *config);
> -    void (*set_config)(VirtIODevice *vdev, const uint8_t *config);
> -    void (*reset)(VirtIODevice *vdev);
> -    void (*set_status)(VirtIODevice *vdev, uint8_t val);
> -    /***/
>      VirtQueue *vq;
>      const VirtIOBindings *binding;
>      void *binding_opaque;
> --
> 1.7.11.7
>
>
fred.konrad@greensocs.com Dec. 20, 2012, 8:02 a.m. UTC | #2 
On 19/12/2012 20:50, Blue Swirl wrote:
> On Wed, Dec 19, 2012 at 9:53 AM,  <fred.konrad@greensocs.com> wrote:
>> From: KONRAD Frederic <fred.konrad@greensocs.com>
>>
>> This remove the function pointer in VirtIODevice, and use only
>> VirtioDeviceClass function pointer. It should be applied after all
>> the device have been refactored.
>>
>> Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
>> ---
>>   hw/virtio-blk.c |  5 -----
>>   hw/virtio-pci.c |  2 +-
>>   hw/virtio.c     | 41 ++++++++++++++++++++++++++---------------
>>   hw/virtio.h     | 12 ------------
>>   4 files changed, 27 insertions(+), 33 deletions(-)
>>
>> diff --git a/hw/virtio-blk.c b/hw/virtio-blk.c
>> index 65932fd..fbb829e 100644
>> --- a/hw/virtio-blk.c
>> +++ b/hw/virtio-blk.c
>> @@ -628,11 +628,6 @@ static int virtio_blk_device_init(VirtIODevice *vdev)
>>       virtio_init(vdev, "virtio-blk", VIRTIO_ID_BLOCK,
>>                   sizeof(struct virtio_blk_config));
>>
>> -    vdev->get_config = virtio_blk_update_config;
>> -    vdev->set_config = virtio_blk_set_config;
>> -    vdev->get_features = virtio_blk_get_features;
>> -    vdev->set_status = virtio_blk_set_status;
>> -    vdev->reset = virtio_blk_reset;
>>       s->bs = blk->conf.bs;
>>       s->conf = &blk->conf;
>>       virtio_blk_set_conf(qdev, blk);
>> diff --git a/hw/virtio-pci.c b/hw/virtio-pci.c
>> index e3a8276..cdc3473 100644
>> --- a/hw/virtio-pci.c
>> +++ b/hw/virtio-pci.c
>> @@ -262,7 +262,7 @@ static void virtio_ioport_write(void *opaque, uint32_t addr, uint32_t val)
>>       case VIRTIO_PCI_GUEST_FEATURES:
>>          /* Guest does not negotiate properly?  We have to assume nothing. */
>>          if (val & (1 << VIRTIO_F_BAD_FEATURE)) {
>> -            val = vdev->bad_features ? vdev->bad_features(vdev) : 0;
>> +            val = get_virtio_device_bad_features(proxy->bus);
>>          }
>>           virtio_set_features(vdev, val);
>>           break;
>> diff --git a/hw/virtio.c b/hw/virtio.c
>> index e40fa12..82bf3dd 100644
>> --- a/hw/virtio.c
>> +++ b/hw/virtio.c
>> @@ -517,10 +517,11 @@ void virtio_update_irq(VirtIODevice *vdev)
>>
>>   void virtio_set_status(VirtIODevice *vdev, uint8_t val)
>>   {
>> +    VirtioDeviceClass *k = VIRTIO_DEVICE_GET_CLASS(vdev);
>>       trace_virtio_set_status(vdev, val);
>>
>> -    if (vdev->set_status) {
>> -        vdev->set_status(vdev, val);
>> +    if (k->set_status) {
>> +        k->set_status(vdev, val);
>>       }
>>       vdev->status = val;
>>   }
>> @@ -528,12 +529,14 @@ void virtio_set_status(VirtIODevice *vdev, uint8_t val)
>>   void virtio_reset(void *opaque)
>>   {
>>       VirtIODevice *vdev = opaque;
>> +    VirtioDeviceClass *k = VIRTIO_DEVICE_GET_CLASS(vdev);
>>       int i;
>>
>>       virtio_set_status(vdev, 0);
>>
>> -    if (vdev->reset)
>> -        vdev->reset(vdev);
>> +    if (k->reset) {
>> +        k->reset(vdev);
>> +    }
>>
>>       vdev->guest_features = 0;
>>       vdev->queue_sel = 0;
>> @@ -557,9 +560,10 @@ void virtio_reset(void *opaque)
>>
>>   uint32_t virtio_config_readb(VirtIODevice *vdev, uint32_t addr)
>>   {
>> +    VirtioDeviceClass *k = VIRTIO_DEVICE_GET_CLASS(vdev);
>>       uint8_t val;
>>
>> -    vdev->get_config(vdev, vdev->config);
>> +    k->get_config(vdev, vdev->config);
>>
>>       if (addr > (vdev->config_len - sizeof(val)))
>>           return (uint32_t)-1;
>> @@ -570,9 +574,10 @@ uint32_t virtio_config_readb(VirtIODevice *vdev, uint32_t addr)
>>
>>   uint32_t virtio_config_readw(VirtIODevice *vdev, uint32_t addr)
>>   {
>> +    VirtioDeviceClass *k = VIRTIO_DEVICE_GET_CLASS(vdev);
>>       uint16_t val;
>>
>> -    vdev->get_config(vdev, vdev->config);
>> +    k->get_config(vdev, vdev->config);
>>
>>       if (addr > (vdev->config_len - sizeof(val)))
>>           return (uint32_t)-1;
>> @@ -583,9 +588,10 @@ uint32_t virtio_config_readw(VirtIODevice *vdev, uint32_t addr)
>>
>>   uint32_t virtio_config_readl(VirtIODevice *vdev, uint32_t addr)
>>   {
>> +    VirtioDeviceClass *k = VIRTIO_DEVICE_GET_CLASS(vdev);
>>       uint32_t val;
>>
>> -    vdev->get_config(vdev, vdev->config);
>> +    k->get_config(vdev, vdev->config);
>>
>>       if (addr > (vdev->config_len - sizeof(val)))
>>           return (uint32_t)-1;
>> @@ -596,6 +602,7 @@ uint32_t virtio_config_readl(VirtIODevice *vdev, uint32_t addr)
>>
>>   void virtio_config_writeb(VirtIODevice *vdev, uint32_t addr, uint32_t data)
>>   {
>> +    VirtioDeviceClass *k = VIRTIO_DEVICE_GET_CLASS(vdev);
>>       uint8_t val = data;
>>
>>       if (addr > (vdev->config_len - sizeof(val)))
>> @@ -603,12 +610,13 @@ void virtio_config_writeb(VirtIODevice *vdev, uint32_t addr, uint32_t data)
>>
>>       stb_p(vdev->config + addr, val);
>>
>> -    if (vdev->set_config)
>> -        vdev->set_config(vdev, vdev->config);
>> +    if (k->set_config)
> Missing braces, please use checkpatch.pl.
I don't understand, I used checkpatch.pl before submitting but it didn't 
find it.

>
>> +        k->set_config(vdev, vdev->config);
>>   }
>>
>>   void virtio_config_writew(VirtIODevice *vdev, uint32_t addr, uint32_t data)
>>   {
>> +    VirtioDeviceClass *k = VIRTIO_DEVICE_GET_CLASS(vdev);
>>       uint16_t val = data;
>>
>>       if (addr > (vdev->config_len - sizeof(val)))
>> @@ -616,12 +624,13 @@ void virtio_config_writew(VirtIODevice *vdev, uint32_t addr, uint32_t data)
>>
>>       stw_p(vdev->config + addr, val);
>>
>> -    if (vdev->set_config)
>> -        vdev->set_config(vdev, vdev->config);
>> +    if (k->set_config)
> Ditto.
>
>> +        k->set_config(vdev, vdev->config);
>>   }
>>
>>   void virtio_config_writel(VirtIODevice *vdev, uint32_t addr, uint32_t data)
>>   {
>> +    VirtioDeviceClass *k = VIRTIO_DEVICE_GET_CLASS(vdev);
>>       uint32_t val = data;
>>
>>       if (addr > (vdev->config_len - sizeof(val)))
>> @@ -629,8 +638,9 @@ void virtio_config_writel(VirtIODevice *vdev, uint32_t addr, uint32_t data)
>>
>>       stl_p(vdev->config + addr, val);
>>
>> -    if (vdev->set_config)
>> -        vdev->set_config(vdev, vdev->config);
>> +    if (k->set_config) {
>> +        k->set_config(vdev, vdev->config);
>> +    }
But it found this one, that's why I added brace here.
>>   }
>>
>>   void virtio_queue_set_addr(VirtIODevice *vdev, int n, hwaddr addr)
>> @@ -799,13 +809,14 @@ void virtio_save(VirtIODevice *vdev, QEMUFile *f)
>>
>>   int virtio_set_features(VirtIODevice *vdev, uint32_t val)
>>   {
>> +    VirtioDeviceClass *k = VIRTIO_DEVICE_GET_CLASS(vdev);
>>       uint32_t supported_features =
>>           vdev->binding->get_features(vdev->binding_opaque);
>>       bool bad = (val & ~supported_features) != 0;
>>
>>       val &= supported_features;
>> -    if (vdev->set_features) {
>> -        vdev->set_features(vdev, val);
>> +    if (k->set_features) {
>> +        k->set_features(vdev, val);
>>       }
>>       vdev->guest_features = val;
>>       return bad ? -1 : 0;
>> diff --git a/hw/virtio.h b/hw/virtio.h
>> index 98596a9..857fd78 100644
>> --- a/hw/virtio.h
>> +++ b/hw/virtio.h
>> @@ -128,18 +128,6 @@ struct VirtIODevice
>>       void *config;
>>       uint16_t config_vector;
>>       int nvectors;
>> -    /*
>> -     * Will be removed ( at the end of the series ) as we have it in
>> -     * VirtioDeviceClass.
>> -     */
>> -    uint32_t (*get_features)(VirtIODevice *vdev, uint32_t requested_features);
>> -    uint32_t (*bad_features)(VirtIODevice *vdev);
>> -    void (*set_features)(VirtIODevice *vdev, uint32_t val);
>> -    void (*get_config)(VirtIODevice *vdev, uint8_t *config);
>> -    void (*set_config)(VirtIODevice *vdev, const uint8_t *config);
>> -    void (*reset)(VirtIODevice *vdev);
>> -    void (*set_status)(VirtIODevice *vdev, uint8_t val);
>> -    /***/
>>       VirtQueue *vq;
>>       const VirtIOBindings *binding;
>>       void *binding_opaque;
>> --
>> 1.7.11.7
>>
>>
diff mbox

Patch

diff --git a/hw/virtio-blk.c b/hw/virtio-blk.c
index 65932fd..fbb829e 100644
--- a/hw/virtio-blk.c
+++ b/hw/virtio-blk.c
@@ -628,11 +628,6 @@  static int virtio_blk_device_init(VirtIODevice *vdev)
     virtio_init(vdev, "virtio-blk", VIRTIO_ID_BLOCK,
                 sizeof(struct virtio_blk_config));
 
-    vdev->get_config = virtio_blk_update_config;
-    vdev->set_config = virtio_blk_set_config;
-    vdev->get_features = virtio_blk_get_features;
-    vdev->set_status = virtio_blk_set_status;
-    vdev->reset = virtio_blk_reset;
     s->bs = blk->conf.bs;
     s->conf = &blk->conf;
     virtio_blk_set_conf(qdev, blk);
diff --git a/hw/virtio-pci.c b/hw/virtio-pci.c
index e3a8276..cdc3473 100644
--- a/hw/virtio-pci.c
+++ b/hw/virtio-pci.c
@@ -262,7 +262,7 @@  static void virtio_ioport_write(void *opaque, uint32_t addr, uint32_t val)
     case VIRTIO_PCI_GUEST_FEATURES:
 	/* Guest does not negotiate properly?  We have to assume nothing. */
 	if (val & (1 << VIRTIO_F_BAD_FEATURE)) {
-            val = vdev->bad_features ? vdev->bad_features(vdev) : 0;
+            val = get_virtio_device_bad_features(proxy->bus);
 	}
         virtio_set_features(vdev, val);
         break;
diff --git a/hw/virtio.c b/hw/virtio.c
index e40fa12..82bf3dd 100644
--- a/hw/virtio.c
+++ b/hw/virtio.c
@@ -517,10 +517,11 @@  void virtio_update_irq(VirtIODevice *vdev)
 
 void virtio_set_status(VirtIODevice *vdev, uint8_t val)
 {
+    VirtioDeviceClass *k = VIRTIO_DEVICE_GET_CLASS(vdev);
     trace_virtio_set_status(vdev, val);
 
-    if (vdev->set_status) {
-        vdev->set_status(vdev, val);
+    if (k->set_status) {
+        k->set_status(vdev, val);
     }
     vdev->status = val;
 }
@@ -528,12 +529,14 @@  void virtio_set_status(VirtIODevice *vdev, uint8_t val)
 void virtio_reset(void *opaque)
 {
     VirtIODevice *vdev = opaque;
+    VirtioDeviceClass *k = VIRTIO_DEVICE_GET_CLASS(vdev);
     int i;
 
     virtio_set_status(vdev, 0);
 
-    if (vdev->reset)
-        vdev->reset(vdev);
+    if (k->reset) {
+        k->reset(vdev);
+    }
 
     vdev->guest_features = 0;
     vdev->queue_sel = 0;
@@ -557,9 +560,10 @@  void virtio_reset(void *opaque)
 
 uint32_t virtio_config_readb(VirtIODevice *vdev, uint32_t addr)
 {
+    VirtioDeviceClass *k = VIRTIO_DEVICE_GET_CLASS(vdev);
     uint8_t val;
 
-    vdev->get_config(vdev, vdev->config);
+    k->get_config(vdev, vdev->config);
 
     if (addr > (vdev->config_len - sizeof(val)))
         return (uint32_t)-1;
@@ -570,9 +574,10 @@  uint32_t virtio_config_readb(VirtIODevice *vdev, uint32_t addr)
 
 uint32_t virtio_config_readw(VirtIODevice *vdev, uint32_t addr)
 {
+    VirtioDeviceClass *k = VIRTIO_DEVICE_GET_CLASS(vdev);
     uint16_t val;
 
-    vdev->get_config(vdev, vdev->config);
+    k->get_config(vdev, vdev->config);
 
     if (addr > (vdev->config_len - sizeof(val)))
         return (uint32_t)-1;
@@ -583,9 +588,10 @@  uint32_t virtio_config_readw(VirtIODevice *vdev, uint32_t addr)
 
 uint32_t virtio_config_readl(VirtIODevice *vdev, uint32_t addr)
 {
+    VirtioDeviceClass *k = VIRTIO_DEVICE_GET_CLASS(vdev);
     uint32_t val;
 
-    vdev->get_config(vdev, vdev->config);
+    k->get_config(vdev, vdev->config);
 
     if (addr > (vdev->config_len - sizeof(val)))
         return (uint32_t)-1;
@@ -596,6 +602,7 @@  uint32_t virtio_config_readl(VirtIODevice *vdev, uint32_t addr)
 
 void virtio_config_writeb(VirtIODevice *vdev, uint32_t addr, uint32_t data)
 {
+    VirtioDeviceClass *k = VIRTIO_DEVICE_GET_CLASS(vdev);
     uint8_t val = data;
 
     if (addr > (vdev->config_len - sizeof(val)))
@@ -603,12 +610,13 @@  void virtio_config_writeb(VirtIODevice *vdev, uint32_t addr, uint32_t data)
 
     stb_p(vdev->config + addr, val);
 
-    if (vdev->set_config)
-        vdev->set_config(vdev, vdev->config);
+    if (k->set_config)
+        k->set_config(vdev, vdev->config);
 }
 
 void virtio_config_writew(VirtIODevice *vdev, uint32_t addr, uint32_t data)
 {
+    VirtioDeviceClass *k = VIRTIO_DEVICE_GET_CLASS(vdev);
     uint16_t val = data;
 
     if (addr > (vdev->config_len - sizeof(val)))
@@ -616,12 +624,13 @@  void virtio_config_writew(VirtIODevice *vdev, uint32_t addr, uint32_t data)
 
     stw_p(vdev->config + addr, val);
 
-    if (vdev->set_config)
-        vdev->set_config(vdev, vdev->config);
+    if (k->set_config)
+        k->set_config(vdev, vdev->config);
 }
 
 void virtio_config_writel(VirtIODevice *vdev, uint32_t addr, uint32_t data)
 {
+    VirtioDeviceClass *k = VIRTIO_DEVICE_GET_CLASS(vdev);
     uint32_t val = data;
 
     if (addr > (vdev->config_len - sizeof(val)))
@@ -629,8 +638,9 @@  void virtio_config_writel(VirtIODevice *vdev, uint32_t addr, uint32_t data)
 
     stl_p(vdev->config + addr, val);
 
-    if (vdev->set_config)
-        vdev->set_config(vdev, vdev->config);
+    if (k->set_config) {
+        k->set_config(vdev, vdev->config);
+    }
 }
 
 void virtio_queue_set_addr(VirtIODevice *vdev, int n, hwaddr addr)
@@ -799,13 +809,14 @@  void virtio_save(VirtIODevice *vdev, QEMUFile *f)
 
 int virtio_set_features(VirtIODevice *vdev, uint32_t val)
 {
+    VirtioDeviceClass *k = VIRTIO_DEVICE_GET_CLASS(vdev);
     uint32_t supported_features =
         vdev->binding->get_features(vdev->binding_opaque);
     bool bad = (val & ~supported_features) != 0;
 
     val &= supported_features;
-    if (vdev->set_features) {
-        vdev->set_features(vdev, val);
+    if (k->set_features) {
+        k->set_features(vdev, val);
     }
     vdev->guest_features = val;
     return bad ? -1 : 0;
diff --git a/hw/virtio.h b/hw/virtio.h
index 98596a9..857fd78 100644
--- a/hw/virtio.h
+++ b/hw/virtio.h
@@ -128,18 +128,6 @@  struct VirtIODevice
     void *config;
     uint16_t config_vector;
     int nvectors;
-    /*
-     * Will be removed ( at the end of the series ) as we have it in
-     * VirtioDeviceClass.
-     */
-    uint32_t (*get_features)(VirtIODevice *vdev, uint32_t requested_features);
-    uint32_t (*bad_features)(VirtIODevice *vdev);
-    void (*set_features)(VirtIODevice *vdev, uint32_t val);
-    void (*get_config)(VirtIODevice *vdev, uint8_t *config);
-    void (*set_config)(VirtIODevice *vdev, const uint8_t *config);
-    void (*reset)(VirtIODevice *vdev);
-    void (*set_status)(VirtIODevice *vdev, uint8_t val);
-    /***/
     VirtQueue *vq;
     const VirtIOBindings *binding;
     void *binding_opaque;