Patchwork wpa_supplicant: Document ht-caps over-rides.

login
register
mail settings
Submitter Ben Greear
Date Dec. 13, 2012, 5:31 p.m.
Message ID <1355419872-4122-1-git-send-email-greearb@candelatech.com>
Download mbox | patch
Permalink /patch/206202/
State Accepted
Commit c8d22af88ff93522b4f8edfde40e2aee6a24dc3e
Headers show

Comments

Ben Greear - Dec. 13, 2012, 5:31 p.m.
From: Ben Greear <greearb@candelatech.com>

Signed-off-by: Ben Greear <greearb@candelatech.com>
---
 wpa_supplicant/wpa_supplicant.conf |   28 ++++++++++++++++++++++++++++
 1 files changed, 28 insertions(+), 0 deletions(-)
Jouni Malinen - Dec. 18, 2012, 12:50 p.m.
Thanks, applied.

Patch

diff --git a/wpa_supplicant/wpa_supplicant.conf b/wpa_supplicant/wpa_supplicant.conf
index 5f0dec6..e76b388 100644
--- a/wpa_supplicant/wpa_supplicant.conf
+++ b/wpa_supplicant/wpa_supplicant.conf
@@ -514,6 +514,34 @@  fast_reauth=1
 # PMF required: ieee80211w=2 and key_mgmt=WPA-EAP-SHA256
 # (and similarly for WPA-PSK and WPA-WPSK-SHA256 if WPA2-Personal is used)
 #
+# disable_ht: Whether HT (802.11n) should be disabled.
+# 0 = HT enabled (if AP supports it)
+# 1 = HT Disabled.
+#
+# disable_ht40: Whether HT-40 (802.11n) should be disabled.
+# 0 = HT-40 enabled (if AP supports it)
+# 1 = HT-40 Disabled.
+#
+# disable_sgi: Whether SGI (short guard interval) should be disabled.
+# 0 = SGI enabled (if AP supports it)
+# 1 = SGI Disabled.
+#
+# ht_mcs:  Configure allowed MCS rates.
+#  Parsed as an array of bytes, in base-16 (ascii-hex)
+# ht_mcs=""                                   // Use all available (default)
+# ht_mcs="0xff 00 00 00 00 00 00 00 00 00 "   // Use MCS 0-7 only
+# ht_mcs="0xff ff 00 00 00 00 00 00 00 00 "   // Use MCS 0-15 only
+#
+# disable_max_amsdu:  Wether MAX_AMSDU should be disabled.
+# -1 = Do not make any changes.
+# 0  = Enable MAX-AMSDU if hardware supports it.
+# 1  = Disable AMSDU
+#
+# ampdu_density:  Allow over-riding AMPDU density configuration.
+#  Treated as hint by the kernel.
+# -1 = Do not make any changes.
+# 0-3 = Set AMPDU density (aka factor) to specified value.
+#
 # auth_alg: list of allowed IEEE 802.11 authentication algorithms
 # OPEN = Open System authentication (required for WPA/WPA2)
 # SHARED = Shared Key authentication (requires static WEP keys)