Message ID | 1355395022-4543-3-git-send-email-jhkim@insignal.co.kr |
---|---|
State | Changes Requested |
Delegated to: | Minkyu Kang |
Headers | show |
Dear Jeong-Hyeon Kim, On 13/12/12 19:37, Jeong-Hyeon Kim wrote: > ORIGEN_QUAD board is based on Samsung's Exynos4412 SoC. > > Signed-off-by: Jeong-Hyeon Kim <jhkim@insignal.co.kr> > --- > Makefile | 2 +- > board/samsung/origen_quad/Makefile | 59 ++++++ > board/samsung/origen_quad/boot.c | 72 +++++++ > board/samsung/origen_quad/clock.c | 103 ++++++++++ > board/samsung/origen_quad/dmc.c | 163 ++++++++++++++++ > board/samsung/origen_quad/lowlevel_init.S | 151 +++++++++++++++ > board/samsung/origen_quad/origen_quad.c | 163 ++++++++++++++++ > board/samsung/origen_quad/setup.h | 300 +++++++++++++++++++++++++++++ > boards.cfg | 1 + > include/configs/origen_quad.h | 179 +++++++++++++++++ > tools/Makefile | 2 + > 11 files changed, 1194 insertions(+), 1 deletion(-) > create mode 100644 board/samsung/origen_quad/Makefile > create mode 100644 board/samsung/origen_quad/boot.c > create mode 100644 board/samsung/origen_quad/clock.c > create mode 100644 board/samsung/origen_quad/dmc.c > create mode 100644 board/samsung/origen_quad/lowlevel_init.S > create mode 100644 board/samsung/origen_quad/origen_quad.c > create mode 100644 board/samsung/origen_quad/setup.h > create mode 100644 include/configs/origen_quad.h missing MAINTAINER entry. > > +void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3) {} > diff --git a/board/samsung/origen_quad/clock.c b/board/samsung/origen_quad/clock.c > new file mode 100644 > index 0000000..7570039 > --- /dev/null > +++ b/board/samsung/origen_quad/clock.c > @@ -0,0 +1,103 @@ > +/* > + * Copyright (C) 2012 Samsung Electronics > + * > + * Copyright (C) 2012 Insignal > + * > + * Clock setup for the Insignal OrigenQUAD board (Exynos4x12) > + * > + * See file CREDITS for list of people who contributed to this > + * project. > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, > + * MA 02111-1307 USA > + */ > + > +#include <config.h> > +#include <asm/io.h> > +#include <asm/arch/cpu.h> > +#include <asm/arch/clock.h> > +#include "setup.h" > + > +void clock_ctrl_init(void) > +{ > + struct exynos4x12_clock *clk = > + (struct exynos4x12_clock *)EXYNOS4_CLOCK_BASE; please use samsung_get_base_clock() function. > + > + /* CLK_SRC_CPU */ > + writel(0x00000000, &clk->src_cpu); > + sdelay(0x10000); > + > + /* CLK_DIV_DMC */ > + writel(CLK_DIV_DMC0_VAL, &clk->div_dmc0); > + writel(CLK_DIV_DMC1_VAL, &clk->div_dmc1); > + > + /* CLK_SRC_TOP */ > + writel(CLK_SRC_TOP0_VAL, &clk->src_top0); > + writel(CLK_SRC_TOP1_VAL, &clk->src_top1); > + sdelay(0x10000); > + writel(CLK_DIV_TOP_VAL, &clk->div_top); > + > + /* LEFTBUS */ > + writel(CLK_SRC_LEFTBUS_VAL, &clk->src_leftbus); > + sdelay(0x10000); > + writel(CLK_DIV_LEFTBUS_VAL, &clk->div_leftbus); > + /* RIGHTBUS */ > + writel(CLK_SRC_RIGHTBUS_VAL, &clk->src_rightbus); > + sdelay(0x10000); > + writel(CLK_DIV_RIGHTBUS_VAL, &clk->div_rightbus); > + > + /* PLL locktime */ > + writel(APLL_LOCK_VAL, &clk->apll_lock); > + writel(MPLL_LOCK_VAL, &clk->mpll_lock); > + writel(EPLL_LOCK_VAL, &clk->epll_lock); > + writel(VPLL_LOCK_VAL, &clk->vpll_lock); > + > + /* CLK_DIV_CPU0/1 */ > + writel(CLK_DIV_CPU0_VAL, &clk->div_cpu0); > + writel(CLK_DIV_CPU1_VAL, &clk->div_cpu1); > + > + /* APLL */ > + writel(APLL_CON1_VAL, &clk->apll_con1); > + writel(APLL_CON0_VAL, &clk->apll_con0); > + /* MPLL */ > + writel(MPLL_CON1_VAL, &clk->mpll_con1); > + writel(MPLL_CON0_VAL, &clk->mpll_con0); > + /* EPLL */ > + writel(EPLL_CON2_VAL, &clk->epll_con2); > + writel(EPLL_CON1_VAL, &clk->epll_con1); > + writel(EPLL_CON0_VAL, &clk->epll_con0); > + /* VPLL */ > + writel(VPLL_CON2_VAL, &clk->vpll_con2); > + writel(VPLL_CON1_VAL, &clk->vpll_con1); > + writel(VPLL_CON0_VAL, &clk->vpll_con0); > + sdelay(0x40000); > + > + writel(CLK_SRC_CPU_VAL, &clk->src_cpu); > + writel(CLK_SRC_DMC_VAL, &clk->src_dmc); > + writel(CLK_SRC_TOP0_VAL, &clk->src_top0); > + writel(CLK_SRC_TOP1_VAL, &clk->src_top1); > + sdelay(0x10000); > + > + /* UART */ > + writel(CLK_SRC_PERIL0_VAL, &clk->src_peril0); > + writel(CLK_DIV_PERIL0_VAL, &clk->div_peril0); > + > + /* for IROM */ > + /* CLK_DIV_FSYS2 */ > + writel(0x0000000F, &clk->div_fsys2); /* MMC2 - SDMMC */ > + /* CLK_DIV_FSYS3 */ > + writel(0x00000100, &clk->div_fsys3); /* MMC4 - eMMC */ magic values? > +} > + > diff --git a/board/samsung/origen_quad/dmc.c b/board/samsung/origen_quad/dmc.c > new file mode 100644 > index 0000000..0bb1164 > --- /dev/null > +++ b/board/samsung/origen_quad/dmc.c > @@ -0,0 +1,163 @@ > +/* > + * Copyright (C) 2012 Samsung Electronics > + * > + * Copyright (C) 2012 Insignal > + * > + * Memory setup for the Insignal OrigenQUAD board (Exynos4x12) > + * > + * See file CREDITS for list of people who contributed to this > + * project. > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, > + * MA 02111-1307 USA > + */ > + > +#include <config.h> > +#include <asm/io.h> > +#include <asm/arch/dmc.h> > +#include <asm/arch/clock.h> > +#include <asm/arch/cpu.h> > +#include "setup.h" > + > +void mem_ctrl_init(void) > +{ > + struct exynos4_clock *clk = > + (struct exynos4_clock *)EXYNOS4_CLOCK_BASE; > + struct exynos4_dmc *dmc0 = > + (struct exynos4_dmc *)(EXYNOS4_MIU_BASE); > + struct exynos4_dmc *dmc1 = > + (struct exynos4_dmc *)(EXYNOS4_MIU_BASE + 0x10000); > + > + /* Set DMC to 50MHz for IROM */ > + writel(0x00117713, &clk->div_dmc0); Already set at clock_ctrl_init? > + > + /* > + * DMC 0 > + */ > + writel(0xE3855403, &dmc0->phyzqcontrol); > + writel(0x71101008, &dmc0->phycontrol0); > + writel(0x7110100A, &dmc0->phycontrol0); > + writel(0x00000084, &dmc0->phycontrol1); > + writel(0x71101008, &dmc0->phycontrol0); > + writel(0x0000008C, &dmc0->phycontrol1); > + writel(0x00000084, &dmc0->phycontrol1); > + writel(0x0000008C, &dmc0->phycontrol1); > + writel(0x00000084, &dmc0->phycontrol1); > + writel(0x0FFF30CA, &dmc0->concontrol); > + writel(0x00202500, &dmc0->memcontrol); > + writel(0x40C01323, &dmc0->memconfig0); > + writel(0x80000007, &dmc0->ivcontrol); > + > + writel(0x64000000, &dmc0->prechconfig); > + writel(0x9C4000FF, &dmc0->phycontrol0); > + writel(0x0000005D, &dmc0->timingref); > + > +#if (CONFIG_CLK_MPLL == 330) > + writel(0x2b47654e, &dmc0->timingrow); > + writel(0x35330306, &dmc0->timingdata); > + writel(0x442f0365, &dmc0->timingpower); > +#else > + writel(0x34498691, &dmc0->timingrow); > + writel(0x36330306, &dmc0->timingdata); > + writel(0x50380365, &dmc0->timingpower); > +#endif > + sdelay(0x100000); > + > + writel(0x07000000, &dmc0->directcmd); > + sdelay(0x100000); > + > + writel(0x00071C00, &dmc0->directcmd); > + sdelay(0x100000); > + > + writel(0x00010BFC, &dmc0->directcmd); > + sdelay(0x100000); > + > + writel(0x00000608, &dmc0->directcmd); > + writel(0x00000810, &dmc0->directcmd); > + writel(0x00000C08, &dmc0->directcmd); > + > + /* > + * DMC 1 > + */ > + writel(0xE3855403, &dmc1->phyzqcontrol); > + writel(0x71101008, &dmc1->phycontrol0); > + writel(0x7110100A, &dmc1->phycontrol0); > + writel(0x00000084, &dmc1->phycontrol1); > + writel(0x71101008, &dmc1->phycontrol0); > + writel(0x0000008C, &dmc1->phycontrol1); > + writel(0x00000084, &dmc1->phycontrol1); > + writel(0x0000008C, &dmc1->phycontrol1); > + writel(0x00000084, &dmc1->phycontrol1); > + writel(0x0FFF30CA, &dmc1->concontrol); > + writel(0x00202500, &dmc1->memcontrol); > + writel(0x40C01323, &dmc1->memconfig0); > + writel(0x80000007, &dmc1->ivcontrol); > + writel(0x64000000, &dmc1->prechconfig); > + writel(0x9C4000FF, &dmc1->phycontrol0); > + writel(0x0000005D, &dmc1->timingref); > + > +#if (CONFIG_CLK_MPLL == 330) > + writel(0x2b47654e, &dmc1->timingrow); > + writel(0x35330306, &dmc1->timingdata); > + writel(0x442f0365, &dmc1->timingpower); > +#else > + writel(0x34498691, &dmc1->timingrow); > + writel(0x36330306, &dmc1->timingdata); > + writel(0x50380365, &dmc1->timingpower); > +#endif > + sdelay(0x100000); > + > + writel(0x07000000, &dmc1->directcmd); > + sdelay(0x100000); > + > + writel(0x00071C00, &dmc1->directcmd); > + sdelay(0x100000); > + > + writel(0x00010BFC, &dmc1->directcmd); > + sdelay(0x100000); > + > + writel(0x00000608, &dmc1->directcmd); > + writel(0x00000810, &dmc1->directcmd); > + writel(0x00000C08, &dmc1->directcmd); > +} > + > +void mem_ctrl_init_2nd(void) > +{ > + struct exynos4_dmc *dmc0 = > + (struct exynos4_dmc *)(EXYNOS4_MIU_BASE); > + struct exynos4_dmc *dmc1 = > + (struct exynos4_dmc *)(EXYNOS4_MIU_BASE + 0x10000); > + > + writel(0x7F10100A, &dmc0->phycontrol0); > + writel(0xE0000084, &dmc0->phycontrol1); > + writel(0x7F10100B, &dmc0->phycontrol0); > + sdelay(20000); > + writel(0x0000008C, &dmc0->phycontrol1); > + writel(0x00000084, &dmc0->phycontrol1); > + sdelay(20000); > + > + writel(0x7F10100A, &dmc1->phycontrol0); > + writel(0xE0000084, &dmc1->phycontrol1); > + writel(0x7F10100B, &dmc1->phycontrol0); > + sdelay(20000); > + writel(0x0000008C, &dmc1->phycontrol1); > + writel(0x00000084, &dmc1->phycontrol1); > + sdelay(20000); > + > + writel(0x0FFF30FA, &dmc0->concontrol); > + writel(0x0FFF30FA, &dmc1->concontrol); > + writel(0x00202533, &dmc0->memcontrol); > + writel(0x00202533, &dmc1->memcontrol); There are too many magic values on this file. Please fix it. > +} > diff --git a/board/samsung/origen_quad/origen_quad.c b/board/samsung/origen_quad/origen_quad.c > new file mode 100644 > index 0000000..583fab0 > --- /dev/null > +++ b/board/samsung/origen_quad/origen_quad.c > @@ -0,0 +1,163 @@ > +/* > + * Copyright (C) 2012 Samsung Electronics > + * > + * Copyright (C) 2012 Insignal > + * > + * Board initialize for the Insignal OrigenQUAD board (Exynos4x12) > + * > + * See file CREDITS for list of people who contributed to this > + * project. > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, > + * MA 02111-1307 USA > + */ > + > +#include <common.h> > +#include <asm/io.h> > +#include <netdev.h> > +#include <asm/arch/cpu.h> > +#include <asm/arch/gpio.h> > +#include <asm/arch/mmc.h> > +#include <asm/arch/pinmux.h> > +#include <asm/arch/power.h> > +#include <asm/arch/clock.h> > +#include "setup.h" > + > +DECLARE_GLOBAL_DATA_PTR; > + > +#ifdef CONFIG_DISPLAY_BOARDINFO > +int checkboard(void) > +{ > + printf("\nBoard: " CONFIG_BOARDNAME "\n"); > + return 0; > +} > +#endif > + please remove this blank space. > + > +int board_init(void) > +{ > +#ifdef CONFIG_EXYNOS_SPI > + spi_init(); > +#endif > + return 0; > +} > + > +int dram_init(void) > +{ > + gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE) > + + get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE) > + + get_ram_size((long *)PHYS_SDRAM_3, PHYS_SDRAM_3_SIZE) > + + get_ram_size((long *)PHYS_SDRAM_4, PHYS_SDRAM_4_SIZE); > + > +#ifdef CONFIG_RESERVED_DRAM > + gd->ram_size -= CONFIG_RESERVED_DRAM; > +#endif > + > + return 0; > +} > + > +void dram_init_banksize(void) > +{ > + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; > + gd->bd->bi_dram[0].size = > + get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); > + gd->bd->bi_dram[1].start = PHYS_SDRAM_2; > + gd->bd->bi_dram[1].size = > + get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE); > + gd->bd->bi_dram[2].start = PHYS_SDRAM_3; > + gd->bd->bi_dram[2].size = > + get_ram_size((long *)PHYS_SDRAM_3, PHYS_SDRAM_3_SIZE); > + gd->bd->bi_dram[3].start = PHYS_SDRAM_4; > + gd->bd->bi_dram[3].size = > + get_ram_size((long *)PHYS_SDRAM_4, PHYS_SDRAM_4_SIZE); > + > +#ifdef CONFIG_RESERVED_DRAM > + gd->bd->bi_dram[CONFIG_NR_DRAM_BANKS - 1].size -= CONFIG_RESERVED_DRAM; > +#endif > +} > + > +#ifdef CONFIG_GENERIC_MMC > +int board_emmc_init(void) > +{ > + int err; blank line here. > + err = exynos_pinmux_config(PERIPH_ID_SDMMC0, PINMUX_FLAG_8BIT_MODE); > + if (err) { > + debug("SDMMC0 not configured\n"); > + return err; > + } > + return s5p_mmc_init(0, 8); > +} > + > +int board_sdmmc_init(void) > +{ > + int err; blank line here. > + err = exynos_pinmux_config(PERIPH_ID_SDMMC2, PINMUX_FLAG_NONE); > + if (err) { > + debug("SDMMC2 not configured\n"); > + return err; > + } > + return s5p_mmc_init(2, 4); > +} > + > +int board_mmc_init(bd_t *bis) > +{ > + int err; > + > + struct exynos4_power *power = > + (struct exynos4_power *)samsung_get_base_power(); > + > + if ((power->om_stat & 0x1E) == 0x8) { what is 0x1E and 0x8? > + err = board_emmc_init(); > + err = board_sdmmc_init(); > + } else { > + err = board_sdmmc_init(); > + err = board_emmc_init(); > + } > + > + return 0; > +} > +#endif > + > +int board_eth_init(bd_t *bis) > +{ > +#ifdef CONFIG_SMC911X > + if (smc9115_pre_init()) > + return -1; > + return smc911x_initialize(0, CONFIG_SMC911X_BASE); > +#endif > + return 0; > +} > + > +static int board_uart_init(void) > +{ > + int err; blank line here. > + err = exynos_pinmux_config(PERIPH_ID_UART, PINMUX_FLAG_NONE); > + if (err) > + debug("UART%d not configured\n", > + PERIPH_ID_UART - PERIPH_ID_UART0); > + return err; > +} > + > +#ifdef CONFIG_BOARD_EARLY_INIT_F > +int board_early_init_f(void) > +{ > + int err; > + err = board_uart_init(); > + if (err) > + debug("UART%d init failed\n", > + PERIPH_ID_UART - PERIPH_ID_UART0); 2 lines. then need brace this if statement. > + return err; > +} > +#endif > diff --git a/boards.cfg b/boards.cfg > index 388e4a4..66b9ee3 100644 > --- a/boards.cfg > +++ b/boards.cfg > @@ -284,6 +284,7 @@ s5pc210_universal arm armv7 universal_c210 samsung > smdk5250 arm armv7 smdk5250 samsung exynos > smdkv310 arm armv7 smdkv310 samsung exynos > trats arm armv7 trats samsung exynos > +origen_quad arm armv7 origen_quad samsung exynos It should be aligned with alphabetically. > harmony arm armv7:arm720t harmony nvidia tegra20 > seaboard arm armv7:arm720t seaboard nvidia tegra20 > ventana arm armv7:arm720t ventana nvidia tegra20 > diff --git a/include/configs/origen_quad.h b/include/configs/origen_quad.h > new file mode 100644 > index 0000000..d81eeb3 > --- /dev/null > +++ b/include/configs/origen_quad.h > @@ -0,0 +1,179 @@ > +/* > + * Copyright (C) 2012 Samsung Electronics > + * > + * Copyright (C) 2012 Insignal > + * > + * Configuration settings for the Insignal OrigenQUAD board (Exynos4x12) > + * > + * See file CREDITS for list of people who contributed to this > + * project. > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, > + * MA 02111-1307 USA > + */ > + > +#ifndef __CONFIG_ORIGEN_QUAD_H > +#define __CONFIG_ORIGEN_QUAD_H > + > +/* > + * High Level Configuration Options > + */ > +#define CONFIG_SAMSUNG /* in a SAMSUNG core */ > +#define CONFIG_S5P /* S5P Family */ > +#define CONFIG_EXYNOS4 /* which is in a Exynos4 series */ > +#define CONFIG_EXYNOS4412 /* which is in a Exynos4412 */ > +#define CONFIG_ORIGEN_QUAD /* which is in a ORIGEN QUAD */ > +#define CONFIG_BOARDNAME "Origen" > +#define CONFIG_IDENT_STRING " for Insignal Origen" > +#define CONFIG_MACH_TYPE 3455 Is it same board with Origen? > + > +#include <asm/arch/cpu.h> /* get chip and board defs */ > + > +/* > + * Clock / PLL > + */ > +#define CONFIG_SYS_CLK_FREQ 24000000 /* 24MHz input clock */ > +#define CONFIG_CLK_APLL 1400 > +#define CONFIG_CLK_MPLL 400 > +#define CONFIG_SYS_HZ 1000 > + > +#define CONFIG_PWM > + > +/* > + * Memory > + */ > +/* Default address */ > +#define CONFIG_SYS_SDRAM_BASE 0x40000000 > +#define CONFIG_SYS_TEXT_BASE 0x43E00000 > +#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_TEXT_BASE > +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - GENERATED_GBL_DATA_SIZE) > +/* Size of malloc() pool */ > +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20UL)) > +/* Cache */ > +#define CONFIG_L2_OFF 1 > +#define CONFIG_SYS_DCACHE_OFF /* Keep L2 Cache Disabled */ > +/* DRAM */ > +#define CONFIG_NR_DRAM_BANKS 4 /* 256 MB * 4 = 1 GB */ > +#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */ > +#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE > +#define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE > +#define PHYS_SDRAM_2 (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE) > +#define PHYS_SDRAM_2_SIZE SDRAM_BANK_SIZE > +#define PHYS_SDRAM_3 (PHYS_SDRAM_2 + PHYS_SDRAM_2_SIZE) > +#define PHYS_SDRAM_3_SIZE SDRAM_BANK_SIZE > +#define PHYS_SDRAM_4 (PHYS_SDRAM_3 + PHYS_SDRAM_3_SIZE) > +#define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE > +/* Reserved */ > +#define CONFIG_RESERVED_DRAM 0x100000 > +/* Mem test */ > +#define CONFIG_CMD_MEMORY > +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE > +#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_4 + PHYS_SDRAM_4_SIZE - (8UL << 20UL)) > + > +/* > + * Serial > + */ > +#define CONFIG_SERIAL2 2 /* use SERIAL2 in 0~3 */ > +#define CONFIG_SERIAL_MULTI 1 > +#define CONFIG_BAUDRATE 115200 > + > +/* > + * SD/MMC > + */ > +#define CONFIG_GENERIC_MMC > +#define CONFIG_MMC > +#define CONFIG_SDHCI > +#define CONFIG_S5P_SDHCI > +#define CONFIG_CMD_MMC > + > +/* > + * File System > + */ > +#define CONFIG_DOS_PARTITION > +#define CONFIG_CMD_FAT > +#define CONFIG_CMD_EXT2 > + > +/* > + * Flash > + */ > +#define CONFIG_SYS_NO_FLASH > + > +/* > + * Image map on sdmmc/emmc > + */ > +#define CONFIG_SECURE_BL1_ONLY > +#define CONFIG_SPL > +#define CONFIG_MBR_SIZE (512) > +#define CONFIG_SBL_SIZE (8UL << 10) /* 8KB */ > +#define CONFIG_BL1_SIZE (16UL << 10) /* 16KB */ > +#define CONFIG_BL2_SIZE (512UL << 10) /* 512KB */ > + > +/* > + * Console > + */ > +#define CONFIG_SYS_PROMPT CONFIG_BOARDNAME " # " > +/* Console I/O Buffer Size */ > +#define CONFIG_SYS_CBSIZE 256 > +/* Print Buffer Size */ > +#define CONFIG_SYS_PBSIZE 384 > +/* max number of command args */ > +#define CONFIG_SYS_MAXARGS 16 > +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ > + > +/* > + * Commands > + */ > +#define CONFIG_CMDLINE_EDITING > +#define CONFIG_SYS_LONGHELP /* undef to save memory */ > +#include <config_cmd_default.h> > +#undef CONFIG_CMD_NET > +#undef CONFIG_CMD_NFS > + > +/* > + * Environment > + */ > +#define CONFIG_ENV_IS_IN_MMC > +#define CONFIG_SYS_MMC_ENV_DEV 0 > +#define CONFIG_ENV_OFFSET (CONFIG_MBR_SIZE \ > + +CONFIG_SBL_SIZE \ need space after +. > + +CONFIG_BL1_SIZE \ > + +CONFIG_BL2_SIZE) > +#define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */ > +#define CONFIG_ENV_OVERWRITE > +/* Default */ > +#define CONFIG_BOOTCOMMAND "fatload mmc 0 40008000 uImage; bootm 40008000" > + > +/* > + * Misc > + */ > +/* Initialize */ > +#define CONFIG_ARCH_CPU_INIT 1 > +#define CONFIG_BOARD_EARLY_INIT_F 1 > +/* display information */ > +#define CONFIG_DISPLAY_CPUINFO > +#define CONFIG_DISPLAY_BOARDINFO > +/* Delay */ > +#define CONFIG_BOOTDELAY 3 > +#define CONFIG_ZERO_BOOTDELAY_CHECK > +/* TAGS */ > +#define CONFIG_SETUP_MEMORY_TAGS > +#define CONFIG_CMDLINE_TAG > +#define CONFIG_INITRD_TAG > +/* Enable devicetree support */ > +#define CONFIG_OF_LIBFDT > +/* Boot Argument Buffer Size */ > +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE > + > +#endif /* __CONFIG_ORIGEN_QUAD_H */ > diff --git a/tools/Makefile b/tools/Makefile > index 686840a..3da314c 100644 > --- a/tools/Makefile > +++ b/tools/Makefile > @@ -68,6 +68,7 @@ BIN_FILES-$(CONFIG_CMD_LOADS) += img2srec$(SFX) > BIN_FILES-$(CONFIG_XWAY_SWAP_BYTES) += xway-swap-bytes$(SFX) > BIN_FILES-y += mkenvimage$(SFX) > BIN_FILES-y += mkimage$(SFX) > +BIN_FILES-$(CONFIG_EXYNOS4) += mk$(BOARD)spl$(SFX) CONFIG_EXYNOS4? Why? > BIN_FILES-$(CONFIG_SMDK5250) += mksmdk5250spl$(SFX) > BIN_FILES-$(CONFIG_MX28) += mxsboot$(SFX) > BIN_FILES-$(CONFIG_NETCONSOLE) += ncb$(SFX) > @@ -97,6 +98,7 @@ NOPED_OBJ_FILES-y += imximage.o > NOPED_OBJ_FILES-y += omapimage.o > NOPED_OBJ_FILES-y += mkenvimage.o > NOPED_OBJ_FILES-y += mkimage.o > +OBJ_FILES-$(CONFIG_EXYNOS4) += mkexynosspl.o > OBJ_FILES-$(CONFIG_SMDK5250) += mkexynosspl.o > OBJ_FILES-$(CONFIG_MX28) += mxsboot.o > OBJ_FILES-$(CONFIG_NETCONSOLE) += ncb.o > Thanks. Minkyu Kang.
Dear Minky Kang, Thanks for your concern. According to your suggestion, I will fix it. BRs, JHKIM 2012년 12월 15일 14:56, Minkyu Kang 쓴 글: > Dear Jeong-Hyeon Kim, > > On 13/12/12 19:37, Jeong-Hyeon Kim wrote: >> ORIGEN_QUAD board is based on Samsung's Exynos4412 SoC. >> >> Signed-off-by: Jeong-Hyeon Kim <jhkim@insignal.co.kr> >> --- >> Makefile | 2 +- >> board/samsung/origen_quad/Makefile | 59 ++++++ >> board/samsung/origen_quad/boot.c | 72 +++++++ >> board/samsung/origen_quad/clock.c | 103 ++++++++++ >> board/samsung/origen_quad/dmc.c | 163 ++++++++++++++++ >> board/samsung/origen_quad/lowlevel_init.S | 151 +++++++++++++++ >> board/samsung/origen_quad/origen_quad.c | 163 ++++++++++++++++ >> board/samsung/origen_quad/setup.h | 300 +++++++++++++++++++++++++++++ >> boards.cfg | 1 + >> include/configs/origen_quad.h | 179 +++++++++++++++++ >> tools/Makefile | 2 + >> 11 files changed, 1194 insertions(+), 1 deletion(-) >> create mode 100644 board/samsung/origen_quad/Makefile >> create mode 100644 board/samsung/origen_quad/boot.c >> create mode 100644 board/samsung/origen_quad/clock.c >> create mode 100644 board/samsung/origen_quad/dmc.c >> create mode 100644 board/samsung/origen_quad/lowlevel_init.S >> create mode 100644 board/samsung/origen_quad/origen_quad.c >> create mode 100644 board/samsung/origen_quad/setup.h >> create mode 100644 include/configs/origen_quad.h > missing MAINTAINER entry. > >> +void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3) {} >> diff --git a/board/samsung/origen_quad/clock.c b/board/samsung/origen_quad/clock.c >> new file mode 100644 >> index 0000000..7570039 >> --- /dev/null >> +++ b/board/samsung/origen_quad/clock.c >> @@ -0,0 +1,103 @@ >> +/* >> + * Copyright (C) 2012 Samsung Electronics >> + *BR >> + * Copyright (C) 2012 Insignal >> + * >> + * Clock setup for the Insignal OrigenQUAD board (Exynos4x12) >> + * >> + * See file CREDITS for list of people who contributed to this >> + * project. >> + * >> + * This program is free software; you can redistribute it and/or >> + * modify it under the terms of the GNU General Public License as >> + * published by the Free Software Foundation; either version 2 of >> + * the License, or (at your option) any later version. >> + * >> + * This program is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + * >> + * You should have received a copy of the GNU General Public License >> + * along with this program; if not, write to the Free Software >> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, >> + * MA 02111-1307 USA >> + */ >> + >> +#include <config.h> >> +#include <asm/io.h> >> +#include <asm/arch/cpu.h> >> +#include <asm/arch/clock.h> >> +#include "setup.h" >> + >> +void clock_ctrl_init(void) >> +{ >> + struct exynos4x12_clock *clk = >> + (struct exynos4x12_clock *)EXYNOS4_CLOCK_BASE; > please use samsung_get_base_clock() function. > >> + >> + /* CLK_SRC_CPU */ >> + writel(0x00000000, &clk->src_cpu); >> + sdelay(0x10000); >> + >> + /* CLK_DIV_DMC */ >> + writel(CLK_DIV_DMC0_VAL, &clk->div_dmc0); >> + writel(CLK_DIV_DMC1_VAL, &clk->div_dmc1); >> + >> + /* CLK_SRC_TOP */ >> + writel(CLK_SRC_TOP0_VAL, &clk->src_top0); >> + writel(CLK_SRC_TOP1_VAL, &clk->src_top1); >> + sdelay(0x10000); >> + writel(CLK_DIV_TOP_VAL, &clk->div_top); >> + >> + /* LEFTBUS */ >> + writel(CLK_SRC_LEFTBUS_VAL, &clk->src_leftbus); >> + sdelay(0x10000); >> + writel(CLK_DIV_LEFTBUS_VAL, &clk->div_leftbus); >> + /* RIGHTBUS */ >> + writel(CLK_SRC_RIGHTBUS_VAL, &clk->src_rightbus); >> + sdelay(0x10000); >> + writel(CLK_DIV_RIGHTBUS_VAL, &clk->div_rightbus); >> + >> + /* PLL locktime */ >> + writel(APLL_LOCK_VAL, &clk->apll_lock); >> + writel(MPLL_LOCK_VAL, &clk->mpll_lock); >> + writel(EPLL_LOCK_VAL, &clk->epll_lock); >> + writel(VPLL_LOCK_VAL, &clk->vpll_lock); >> + >> + /* CLK_DIV_CPU0/1 */ >> + writel(CLK_DIV_CPU0_VAL, &clk->div_cpu0); >> + writel(CLK_DIV_CPU1_VAL, &clk->div_cpu1); >> + >> + /* APLL */ >> + writel(APLL_CON1_VAL, &clk->apll_con1); >> + writel(APLL_CON0_VAL, &clk->apll_con0); >> + /* MPLL */ >> + writel(MPLL_CON1_VAL, &clk->mpll_con1); >> + writel(MPLL_CON0_VAL, &clk->mpll_con0); >> + /* EPLL */ >> + writel(EPLL_CON2_VAL, &clk->epll_con2); >> + writel(EPLL_CON1_VAL, &clk->epll_con1); >> + writel(EPLL_CON0_VAL, &clk->epll_con0); >> + /* VPLL */ >> + writel(VPLL_CON2_VAL, &clk->vpll_con2); >> + writel(VPLL_CON1_VAL, &clk->vpll_con1); >> + writel(VPLL_CON0_VAL, &clk->vpll_con0); >> + sdelay(0x40000); >> + >> + writel(CLK_SRC_CPU_VAL, &clk->src_cpu); >> + writel(CLK_SRC_DMC_VAL, &clk->src_dmc); >> + writel(CLK_SRC_TOP0_VAL, &clk->src_top0); >> + writel(CLK_SRC_TOP1_VAL, &clk->src_top1); >> + sdelay(0x10000); >> + >> + /* UART */ >> + writel(CLK_SRC_PERIL0_VAL, &clk->src_peril0); >> + writel(CLK_DIV_PERIL0_VAL, &clk->div_peril0); >> + >> + /* for IROM */ >> + /* CLK_DIV_FSYS2 */ >> + writel(0x0000000F, &clk->div_fsys2); /* MMC2 - SDMMC */ >> + /* CLK_DIV_FSYS3 */ >> + writel(0x00000100, &clk->div_fsys3); /* MMC4 - eMMC */ > magic values? > >> +} >> + >> diff --git a/board/samsung/origen_quad/dmc.c b/board/samsung/origen_quad/dmc.c >> new file mode 100644 >> index 0000000..0bb1164 >> --- /dev/null >> +++ b/board/samsung/origen_quad/dmc.c >> @@ -0,0 +1,163 @@ >> +/* >> + * Copyright (C) 2012 Samsung Electronics >> + * >> + * Copyright (C) 2012 Insignal >> + * >> + * Memory setup for the Insignal OrigenQUAD board (Exynos4x12) >> + * >> + * See file CREDITS for list of people who contributed to this >> + * project. >> + * >> + * This program is free software; you can redistribute it and/or >> + * modify it under the terms of the GNU General Public License as >> + * published by the Free Software Foundation; either version 2 of >> + * the License, or (at your option) any later version. >> + * >> + * This program is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + * >> + * You should have received a copy of the GNU General Public License >> + * along with this program; if not, write to the Free Software >> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, >> + * MA 02111-1307 USA >> + */ >> + >> +#include <config.h> >> +#include <asm/io.h> >> +#include <asm/arch/dmc.h> >> +#include <asm/arch/clock.h> >> +#include <asm/arch/cpu.h> >> +#include "setup.h" >> + >> +void mem_ctrl_init(void) >> +{ >> + struct exynos4_clock *clk = >> + (struct exynos4_clock *)EXYNOS4_CLOCK_BASE; >> + struct exynos4_dmc *dmc0 = >> + (struct exynos4_dmc *)(EXYNOS4_MIU_BASE); >> + struct exynos4_dmc *dmc1 = >> + (struct exynos4_dmc *)(EXYNOS4_MIU_BASE + 0x10000); >> + >> + /* Set DMC to 50MHz for IROM */ >> + writel(0x00117713, &clk->div_dmc0); > Already set at clock_ctrl_init? >> + >> + /* >> + * DMC 0 >> + */ >> + writel(0xE3855403, &dmc0->phyzqcontrol); >> + writel(0x71101008, &dmc0->phycontrol0); >> + writel(0x7110100A, &dmc0->phycontrol0); >> + writel(0x00000084, &dmc0->phycontrol1); >> + writel(0x71101008, &dmc0->phycontrol0); >> + writel(0x0000008C, &dmc0->phycontrol1); >> + writel(0x00000084, &dmc0->phycontrol1); >> + writel(0x0000008C, &dmc0->phycontrol1); >> + writel(0x00000084, &dmc0->phycontrol1); >> + writel(0x0FFF30CA, &dmc0->concontrol); >> + writel(0x00202500, &dmc0->memcontrol); >> + writel(0x40C01323, &dmc0->memconfig0); >> + writel(0x80000007, &dmc0->ivcontrol); >> + >> + writel(0x64000000, &dmc0->prechconfig); >> + writel(0x9C4000FF, &dmc0->phycontrol0); >> + writel(0x0000005D, &dmc0->timingref); >> + >> +#if (CONFIG_CLK_MPLL == 330) >> + writel(0x2b47654e, &dmc0->timingrow); >> + writel(0x35330306, &dmc0->timingdata); >> + writel(0x442f0365, &dmc0->timingpower); >> +#else >> + writel(0x34498691, &dmc0->timingrow); >> + writel(0x36330306, &dmc0->timingdata); >> + writel(0x50380365, &dmc0->timingpower); >> +#endif >> + sdelay(0x100000); >> + >> + writel(0x07000000, &dmc0->directcmd); >> + sdelay(0x100000); >> + >> + writel(0x00071C00, &dmc0->directcmd); >> + sdelay(0x100000); >> + >> + writel(0x00010BFC, &dmc0->directcmd); >> + sdelay(0x100000); >> + >> + writel(0x00000608, &dmc0->directcmd); >> + writel(0x00000810, &dmc0->directcmd); >> + writel(0x00000C08, &dmc0->directcmd); >> + >> + /* >> + * DMC 1 >> + */ >> + writel(0xE3855403, &dmc1->phyzqcontrol); >> + writel(0x71101008, &dmc1->phycontrol0); >> + writel(0x7110100A, &dmc1->phycontrol0); >> + writel(0x00000084, &dmc1->phycontrol1); >> + writel(0x71101008, &dmc1->phycontrol0); >> + writel(0x0000008C, &dmc1->phycontrol1); >> + writel(0x00000084, &dmc1->phycontrol1); >> + writel(0x0000008C, &dmc1->phycontrol1); >> + writel(0x00000084, &dmc1->phycontrol1); >> + writel(0x0FFF30CA, &dmc1->concontrol); >> + writel(0x00202500, &dmc1->memcontrol); >> + writel(0x40C01323, &dmc1->memconfig0); >> + writel(0x80000007, &dmc1->ivcontrol); >> + writel(0x64000000, &dmc1->prechconfig); >> + writel(0x9C4000FF, &dmc1->phycontrol0); >> + writel(0x0000005D, &dmc1->timingref); >> + >> +#if (CONFIG_CLK_MPLL == 330) >> + writel(0x2b47654e, &dmc1->timingrow); >> + writel(0x35330306, &dmc1->timingdata); >> + writel(0x442f0365, &dmc1->timingpower); >> +#else >> + writel(0x34498691, &dmc1->timingrow); >> + writel(0x36330306, &dmc1->timingdata); >> + writel(0x50380365, &dmc1->timingpower); >> +#endif >> + sdelay(0x100000); >> + >> + writel(0x07000000, &dmc1->directcmd); >> + sdelay(0x100000); >> + >> + writel(0x00071C00, &dmc1->directcmd); >> + sdelay(0x100000); >> + >> + writel(0x00010BFC, &dmc1->directcmd); >> + sdelay(0x100000); >> + >> + writel(0x00000608, &dmc1->directcmd); >> + writel(0x00000810, &dmc1->directcmd); >> + writel(0x00000C08, &dmc1->directcmd); >> +} >> + >> +void mem_ctrl_init_2nd(void) >> +{ >> + struct exynos4_dmc *dmc0 = >> + (struct exynos4_dmc *)(EXYNOS4_MIU_BASE); >> + struct exynos4_dmc *dmc1 = >> + (struct exynos4_dmc *)(EXYNOS4_MIU_BASE + 0x10000); >> + >> + writel(0x7F10100A, &dmc0->phycontrol0); >> + writel(0xE0000084, &dmc0->phycontrol1); >> + writel(0x7F10100B, &dmc0->phycontrol0); >> + sdelay(20000); >> + writel(0x0000008C, &dmc0->phycontrol1); >> + writel(0x00000084, &dmc0->phycontrol1); >> + sdelay(20000); >> + >> + writel(0x7F10100A, &dmc1->phycontrol0); >> + writel(0xE0000084, &dmc1->phycontrol1); >> + writel(0x7F10100B, &dmc1->phycontrol0); >> + sdelay(20000); >> + writel(0x0000008C, &dmc1->phycontrol1); >> + writel(0x00000084, &dmc1->phycontrol1); >> + sdelay(20000); >> + >> + writel(0x0FFF30FA, &dmc0->concontrol); >> + writel(0x0FFF30FA, &dmc1->concontrol); >> + writel(0x00202533, &dmc0->memcontrol); >> + writel(0x00202533, &dmc1->memcontrol); > > There are too many magic values on this file. > Please fix it. > >> +} >> diff --git a/board/samsung/origen_quad/origen_quad.c b/board/samsung/origen_quad/origen_quad.c >> new file mode 100644 >> index 0000000..583fab0 >> --- /dev/null >> +++ b/board/samsung/origen_quad/origen_quad.c >> @@ -0,0 +1,163 @@ >> +/* >> + * Copyright (C) 2012 Samsung Electronics >> + * >> + * Copyright (C) 2012 Insignal >> + * >> + * Board initialize for the Insignal OrigenQUAD board (Exynos4x12) >> + * >> + * See file CREDITS for list of people who contributed to this >> + * project. >> + * >> + * This program is free software; you can redistribute it and/or >> + * modify it under the terms of the GNU General Public License as >> + * published by the Free Software Foundation; either version 2 of >> + * the License, or (at your option) any later version. >> + * >> + * This program is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + * >> + * You should have received a copy of the GNU General Public License >> + * along with this program; if not, write to the Free Software >> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, >> + * MA 02111-1307 USA >> + */ >> + >> +#include <common.h> >> +#include <asm/io.h> >> +#include <netdev.h> >> +#include <asm/arch/cpu.h> >> +#include <asm/arch/gpio.h> >> +#include <asm/arch/mmc.h> >> +#include <asm/arch/pinmux.h> >> +#include <asm/arch/power.h> >> +#include <asm/arch/clock.h> >> +#include "setup.h" >> + >> +DECLARE_GLOBAL_DATA_PTR; >> + >> +#ifdef CONFIG_DISPLAY_BOARDINFO >> +int checkboard(void) >> +{ >> + printf("\nBoard: " CONFIG_BOARDNAME "\n"); >> + return 0; >> +} >> +#endif >> + > please remove this blank space. > >> + >> +int board_init(void) >> +{ >> +#ifdef CONFIG_EXYNOS_SPI >> + spi_init(); >> +#endif >> + return 0; >> +} >> + >> +int dram_init(void) >> +{ >> + gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE) >> + + get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE) >> + + get_ram_size((long *)PHYS_SDRAM_3, PHYS_SDRAM_3_SIZE) >> + + get_ram_size((long *)PHYS_SDRAM_4, PHYS_SDRAM_4_SIZE); >> + >> +#ifdef CONFIG_RESERVED_DRAM >> + gd->ram_size -= CONFIG_RESERVED_DRAM; >> +#endif >> + >> + return 0; >> +} >> + >> +void dram_init_banksize(void) >> +{ >> + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; >> + gd->bd->bi_dram[0].size = >> + get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); >> + gd->bd->bi_dram[1].start = PHYS_SDRAM_2; >> + gd->bd->bi_dram[1].size = >> + get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE); >> + gd->bd->bi_dram[2].start = PHYS_SDRAM_3; >> + gd->bd->bi_dram[2].size = >> + get_ram_size((long *)PHYS_SDRAM_3, PHYS_SDRAM_3_SIZE); >> + gd->bd->bi_dram[3].start = PHYS_SDRAM_4; >> + gd->bd->bi_dram[3].size = >> + get_ram_size((long *)PHYS_SDRAM_4, PHYS_SDRAM_4_SIZE); >> + >> +#ifdef CONFIG_RESERVED_DRAM >> + gd->bd->bi_dram[CONFIG_NR_DRAM_BANKS - 1].size -= CONFIG_RESERVED_DRAM; >> +#endif >> +} >> + >> +#ifdef CONFIG_GENERIC_MMC >> +int board_emmc_init(void) >> +{ >> + int err; > blank line here. > >> + err = exynos_pinmux_config(PERIPH_ID_SDMMC0, PINMUX_FLAG_8BIT_MODE); >> + if (err) { >> + debug("SDMMC0 not configured\n"); >> + return err; >> + } >> + return s5p_mmc_init(0, 8); >> +} >> + >> +int board_sdmmc_init(void) >> +{ >> + int err; > blank line here. > >> + err = exynos_pinmux_config(PERIPH_ID_SDMMC2, PINMUX_FLAG_NONE); >> + if (err) { >> + debug("SDMMC2 not configured\n"); >> + return err; >> + } >> + return s5p_mmc_init(2, 4); >> +} >> + >> +int board_mmc_init(bd_t *bis) >> +{ >> + int err; >> + >> + struct exynos4_power *power = >> + (struct exynos4_power *)samsung_get_base_power(); >> + >> + if ((power->om_stat & 0x1E) == 0x8) { > what is 0x1E and 0x8? > >> + err = board_emmc_init(); >> + err = board_sdmmc_init(); >> + } else { >> + err = board_sdmmc_init(); >> + err = board_emmc_init(); >> + } >> + >> + return 0; >> +} >> +#endif >> + >> +int board_eth_init(bd_t *bis) >> +{ >> +#ifdef CONFIG_SMC911X >> + if (smc9115_pre_init()) >> + return -1; >> + return smc911x_initialize(0, CONFIG_SMC911X_BASE); >> +#endif >> + return 0; >> +} >> + >> +static int board_uart_init(void) >> +{ >> + int err; > blank line here. > >> + err = exynos_pinmux_config(PERIPH_ID_UART, PINMUX_FLAG_NONE); >> + if (err) >> + debug("UART%d not configured\n", >> + PERIPH_ID_UART - PERIPH_ID_UART0); >> + return err; >> +} >> + >> +#ifdef CONFIG_BOARD_EARLY_INIT_F >> +int board_early_init_f(void) >> +{ >> + int err; >> + err = board_uart_init(); >> + if (err) >> + debug("UART%d init failed\n", >> + PERIPH_ID_UART - PERIPH_ID_UART0); > 2 lines. then need brace this if statement. > >> + return err; >> +} >> +#endif >> diff --git a/boards.cfg b/boards.cfg >> index 388e4a4..66b9ee3 100644 >> --- a/boards.cfg >> +++ b/boards.cfg >> @@ -284,6 +284,7 @@ s5pc210_universal arm armv7 universal_c210 samsung >> smdk5250 arm armv7 smdk5250 samsung exynos >> smdkv310 arm armv7 smdkv310 samsung exynos >> trats arm armv7 trats samsung exynos >> +origen_quad arm armv7 origen_quad samsung exynos > It should be aligned with alphabetically. > >> harmony arm armv7:arm720t harmony nvidia tegra20 >> seaboard arm armv7:arm720t seaboard nvidia tegra20 >> ventana arm armv7:arm720t ventana nvidia tegra20 >> diff --git a/include/configs/origen_quad.h b/include/configs/origen_quad.h >> new file mode 100644 >> index 0000000..d81eeb3 >> --- /dev/null >> +++ b/include/configs/origen_quad.h >> @@ -0,0 +1,179 @@ >> +/* >> + * Copyright (C) 2012 Samsung Electronics >> + * >> + * Copyright (C) 2012 Insignal >> + * >> + * Configuration settings for the Insignal OrigenQUAD board (Exynos4x12) >> + * >> + * See file CREDITS for list of people who contributed to this >> + * project. >> + * >> + * This program is free software; you can redistribute it and/or >> + * modify it under the terms of the GNU General Public License as >> + * published by the Free Software Foundation; either version 2 of >> + * the License, or (at your option) any later version. >> + * >> + * This program is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + * >> + * You should have received a copy of the GNU General Public License >> + * along with this program; if not, write to the Free Software >> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, >> + * MA 02111-1307 USA >> + */ >> + >> +#ifndef __CONFIG_ORIGEN_QUAD_H >> +#define __CONFIG_ORIGEN_QUAD_H >> + >> +/* >> + * High Level Configuration Options >> + */ >> +#define CONFIG_SAMSUNG /* in a SAMSUNG core */ >> +#define CONFIG_S5P /* S5P Family */ >> +#define CONFIG_EXYNOS4 /* which is in a Exynos4 series */ >> +#define CONFIG_EXYNOS4412 /* which is in a Exynos4412 */ >> +#define CONFIG_ORIGEN_QUAD /* which is in a ORIGEN QUAD */ >> +#define CONFIG_BOARDNAME "Origen" >> +#define CONFIG_IDENT_STRING " for Insignal Origen" >> +#define CONFIG_MACH_TYPE 3455 > Is it same board with Origen? > >> + >> +#include <asm/arch/cpu.h> /* get chip and board defs */ >> + >> +/* >> + * Clock / PLL >> + */ >> +#define CONFIG_SYS_CLK_FREQ 24000000 /* 24MHz input clock */ >> +#define CONFIG_CLK_APLL 1400 >> +#define CONFIG_CLK_MPLL 400 >> +#define CONFIG_SYS_HZ 1000 >> + >> +#define CONFIG_PWM >> + >> +/* >> + * Memory >> + */ >> +/* Default address */ >> +#define CONFIG_SYS_SDRAM_BASE 0x40000000 >> +#define CONFIG_SYS_TEXT_BASE 0x43E00000 >> +#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_TEXT_BASE >> +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - GENERATED_GBL_DATA_SIZE) >> +/* Size of malloc() pool */ >> +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20UL)) >> +/* Cache */ >> +#define CONFIG_L2_OFF 1 >> +#define CONFIG_SYS_DCACHE_OFF /* Keep L2 Cache Disabled */ >> +/* DRAM */ >> +#define CONFIG_NR_DRAM_BANKS 4 /* 256 MB * 4 = 1 GB */ >> +#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */ >> +#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE >> +#define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE >> +#define PHYS_SDRAM_2 (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE) >> +#define PHYS_SDRAM_2_SIZE SDRAM_BANK_SIZE >> +#define PHYS_SDRAM_3 (PHYS_SDRAM_2 + PHYS_SDRAM_2_SIZE) >> +#define PHYS_SDRAM_3_SIZE SDRAM_BANK_SIZE >> +#define PHYS_SDRAM_4 (PHYS_SDRAM_3 + PHYS_SDRAM_3_SIZE) >> +#define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE >> +/* Reserved */ >> +#define CONFIG_RESERVED_DRAM 0x100000 >> +/* Mem test */ >> +#define CONFIG_CMD_MEMORY >> +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE >> +#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_4 + PHYS_SDRAM_4_SIZE - (8UL << 20UL)) >> + >> +/* >> + * Serial >> + */ >> +#define CONFIG_SERIAL2 2 /* use SERIAL2 in 0~3 */ >> +#define CONFIG_SERIAL_MULTI 1 >> +#define CONFIG_BAUDRATE 115200 >> + >> +/* >> + * SD/MMC >> + */ >> +#define CONFIG_GENERIC_MMC >> +#define CONFIG_MMC >> +#define CONFIG_SDHCI >> +#define CONFIG_S5P_SDHCI >> +#define CONFIG_CMD_MMC >> + >> +/* >> + * File System >> + */ >> +#define CONFIG_DOS_PARTITION >> +#define CONFIG_CMD_FAT >> +#define CONFIG_CMD_EXT2 >> + >> +/* >> + * Flash >> + */ >> +#define CONFIG_SYS_NO_FLASH >> + >> +/* >> + * Image map on sdmmc/emmc >> + */ >> +#define CONFIG_SECURE_BL1_ONLY >> +#define CONFIG_SPL >> +#define CONFIG_MBR_SIZE (512) >> +#define CONFIG_SBL_SIZE (8UL << 10) /* 8KB */ >> +#define CONFIG_BL1_SIZE (16UL << 10) /* 16KB */ >> +#define CONFIG_BL2_SIZE (512UL << 10) /* 512KB */ >> + >> +/* >> + * Console >> + */ >> +#define CONFIG_SYS_PROMPT CONFIG_BOARDNAME " # " >> +/* Console I/O Buffer Size */ >> +#define CONFIG_SYS_CBSIZE 256 >> +/* Print Buffer Size */ >> +#define CONFIG_SYS_PBSIZE 384 >> +/* max number of command args */ >> +#define CONFIG_SYS_MAXARGS 16 >> +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ >> + >> +/* >> + * Commands >> + */ >> +#define CONFIG_CMDLINE_EDITING >> +#define CONFIG_SYS_LONGHELP /* undef to save memory */ >> +#include <config_cmd_default.h> >> +#undef CONFIG_CMD_NET >> +#undef CONFIG_CMD_NFS >> + >> +/* >> + * Environment >> + */ >> +#define CONFIG_ENV_IS_IN_MMC >> +#define CONFIG_SYS_MMC_ENV_DEV 0 >> +#define CONFIG_ENV_OFFSET (CONFIG_MBR_SIZE \ >> + +CONFIG_SBL_SIZE \ > need space after +. > >> + +CONFIG_BL1_SIZE \ >> + +CONFIG_BL2_SIZE) >> +#define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */ >> +#define CONFIG_ENV_OVERWRITE >> +/* Default */ >> +#define CONFIG_BOOTCOMMAND "fatload mmc 0 40008000 uImage; bootm 40008000" >> + >> +/* >> + * Misc >> + */ >> +/* Initialize */ >> +#define CONFIG_ARCH_CPU_INIT 1 >> +#define CONFIG_BOARD_EARLY_INIT_F 1 >> +/* display information */ >> +#define CONFIG_DISPLAY_CPUINFO >> +#define CONFIG_DISPLAY_BOARDINFO >> +/* Delay */ >> +#define CONFIG_BOOTDELAY 3 >> +#define CONFIG_ZERO_BOOTDELAY_CHECK >> +/* TAGS */ >> +#define CONFIG_SETUP_MEMORY_TAGS >> +#define CONFIG_CMDLINE_TAG >> +#define CONFIG_INITRD_TAG >> +/* Enable devicetree support */ >> +#define CONFIG_OF_LIBFDT >> +/* Boot Argument Buffer Size */ >> +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE >> + >> +#endif /* __CONFIG_ORIGEN_QUAD_H */ >> diff --git a/tools/Makefile b/tools/Makefile >> index 686840a..3da314c 100644 >> --- a/tools/Makefile >> +++ b/tools/Makefile >> @@ -68,6 +68,7 @@ BIN_FILES-$(CONFIG_CMD_LOADS) += img2srec$(SFX) >> BIN_FILES-$(CONFIG_XWAY_SWAP_BYTES) += xway-swap-bytes$(SFX) >> BIN_FILES-y += mkenvimage$(SFX) >> BIN_FILES-y += mkimage$(SFX) >> +BIN_FILES-$(CONFIG_EXYNOS4) += mk$(BOARD)spl$(SFX) > CONFIG_EXYNOS4? Why? > >> BIN_FILES-$(CONFIG_SMDK5250) += mksmdk5250spl$(SFX) >> BIN_FILES-$(CONFIG_MX28) += mxsboot$(SFX) >> BIN_FILES-$(CONFIG_NETCONSOLE) += ncb$(SFX) >> @@ -97,6 +98,7 @@ NOPED_OBJ_FILES-y += imximage.o >> NOPED_OBJ_FILES-y += omapimage.o >> NOPED_OBJ_FILES-y += mkenvimage.o >> NOPED_OBJ_FILES-y += mkimage.o >> +OBJ_FILES-$(CONFIG_EXYNOS4) += mkexynosspl.o >> OBJ_FILES-$(CONFIG_SMDK5250) += mkexynosspl.o >> OBJ_FILES-$(CONFIG_MX28) += mxsboot.o >> OBJ_FILES-$(CONFIG_NETCONSOLE) += ncb.o >> > Thanks. > Minkyu Kang. >
diff --git a/Makefile b/Makefile index 44db889..c69f740 100644 --- a/Makefile +++ b/Makefile @@ -823,7 +823,7 @@ clean: $(obj)tools/gdb/{astest,gdbcont,gdbsend} \ $(obj)tools/gen_eth_addr $(obj)tools/img2srec \ $(obj)tools/mk{env,}image $(obj)tools/mpc86x_clk \ - $(obj)tools/mk{smdk5250,}spl \ + $(obj)tools/mk{$(SOC),$(BOARD),}spl \ $(obj)tools/mxsboot \ $(obj)tools/ncb $(obj)tools/ubsha1 \ $(obj)tools/kernel-doc/docproc diff --git a/board/samsung/origen_quad/Makefile b/board/samsung/origen_quad/Makefile new file mode 100644 index 0000000..c24c921 --- /dev/null +++ b/board/samsung/origen_quad/Makefile @@ -0,0 +1,59 @@ +# +# Copyright (C) 2012 Samsung Electronics +# +# Copyright (C) 2012 Insignal +# +# Makefile for the Insignal OrigenQUAD board (Exynos4x12) +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +SOBJS := lowlevel_init.o + +COBJS := clock.o +COBJS += dmc.o + +ifndef CONFIG_SPL_BUILD +COBJS += origen_quad.o +else +COBJS += boot.o +endif + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) + +ALL := $(obj).depend $(LIB) + +all: $(ALL) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### \ No newline at end of file diff --git a/board/samsung/origen_quad/boot.c b/board/samsung/origen_quad/boot.c new file mode 100644 index 0000000..53bbe83 --- /dev/null +++ b/board/samsung/origen_quad/boot.c @@ -0,0 +1,72 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * + * Copyright (C) 2012 Insignal + * + * Board initialize for the Insignal OrigenQUAD board (Exynos4x12) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <config.h> +#include "setup.h" + +#define IRAM_ADDRESS 0x02020000 +#define EXTERNAL_FUNC_ADDRESS (IRAM_ADDRESS + 0x0030) +#define IROM_COPY_FROM_SDMMC (EXTERNAL_FUNC_ADDRESS + 0x0) + +typedef u32 (*copy_from_sdmmc_t)(u32 offset, u32 nblock, u32 dest); + +void copy_uboot_to_mem(void) +{ + copy_from_sdmmc_t from_sdmmc; + + from_sdmmc = *(copy_from_sdmmc_t *)IROM_COPY_FROM_SDMMC; + from_sdmmc(BL2_BLK_OFFSET, BL2_BLK_COUNT, CONFIG_SYS_TEXT_BASE); +} + +void board_init_spl(void) +{ + /* PS-Hold high */ + writel(0x5300, EXYNOS4_POWER_BASE + 0x330c); +} + +void board_init_f(unsigned long bootflag) +{ + __attribute__((noreturn)) void (*uboot)(void); + + board_init_spl(); + copy_uboot_to_mem(); + + /* Jump to U-Boot image */ + uboot = (void *)CONFIG_SYS_TEXT_BASE; + (*uboot)(); + /* Never returns Here */ +} + +/* Place Holders */ +void board_init_r(gd_t *id, ulong dest_addr) +{ + /* Function attribute is no-return */ + /* This Function never executes */ + while (1); +} + +void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3) {} diff --git a/board/samsung/origen_quad/clock.c b/board/samsung/origen_quad/clock.c new file mode 100644 index 0000000..7570039 --- /dev/null +++ b/board/samsung/origen_quad/clock.c @@ -0,0 +1,103 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * + * Copyright (C) 2012 Insignal + * + * Clock setup for the Insignal OrigenQUAD board (Exynos4x12) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/clock.h> +#include "setup.h" + +void clock_ctrl_init(void) +{ + struct exynos4x12_clock *clk = + (struct exynos4x12_clock *)EXYNOS4_CLOCK_BASE; + + /* CLK_SRC_CPU */ + writel(0x00000000, &clk->src_cpu); + sdelay(0x10000); + + /* CLK_DIV_DMC */ + writel(CLK_DIV_DMC0_VAL, &clk->div_dmc0); + writel(CLK_DIV_DMC1_VAL, &clk->div_dmc1); + + /* CLK_SRC_TOP */ + writel(CLK_SRC_TOP0_VAL, &clk->src_top0); + writel(CLK_SRC_TOP1_VAL, &clk->src_top1); + sdelay(0x10000); + writel(CLK_DIV_TOP_VAL, &clk->div_top); + + /* LEFTBUS */ + writel(CLK_SRC_LEFTBUS_VAL, &clk->src_leftbus); + sdelay(0x10000); + writel(CLK_DIV_LEFTBUS_VAL, &clk->div_leftbus); + /* RIGHTBUS */ + writel(CLK_SRC_RIGHTBUS_VAL, &clk->src_rightbus); + sdelay(0x10000); + writel(CLK_DIV_RIGHTBUS_VAL, &clk->div_rightbus); + + /* PLL locktime */ + writel(APLL_LOCK_VAL, &clk->apll_lock); + writel(MPLL_LOCK_VAL, &clk->mpll_lock); + writel(EPLL_LOCK_VAL, &clk->epll_lock); + writel(VPLL_LOCK_VAL, &clk->vpll_lock); + + /* CLK_DIV_CPU0/1 */ + writel(CLK_DIV_CPU0_VAL, &clk->div_cpu0); + writel(CLK_DIV_CPU1_VAL, &clk->div_cpu1); + + /* APLL */ + writel(APLL_CON1_VAL, &clk->apll_con1); + writel(APLL_CON0_VAL, &clk->apll_con0); + /* MPLL */ + writel(MPLL_CON1_VAL, &clk->mpll_con1); + writel(MPLL_CON0_VAL, &clk->mpll_con0); + /* EPLL */ + writel(EPLL_CON2_VAL, &clk->epll_con2); + writel(EPLL_CON1_VAL, &clk->epll_con1); + writel(EPLL_CON0_VAL, &clk->epll_con0); + /* VPLL */ + writel(VPLL_CON2_VAL, &clk->vpll_con2); + writel(VPLL_CON1_VAL, &clk->vpll_con1); + writel(VPLL_CON0_VAL, &clk->vpll_con0); + sdelay(0x40000); + + writel(CLK_SRC_CPU_VAL, &clk->src_cpu); + writel(CLK_SRC_DMC_VAL, &clk->src_dmc); + writel(CLK_SRC_TOP0_VAL, &clk->src_top0); + writel(CLK_SRC_TOP1_VAL, &clk->src_top1); + sdelay(0x10000); + + /* UART */ + writel(CLK_SRC_PERIL0_VAL, &clk->src_peril0); + writel(CLK_DIV_PERIL0_VAL, &clk->div_peril0); + + /* for IROM */ + /* CLK_DIV_FSYS2 */ + writel(0x0000000F, &clk->div_fsys2); /* MMC2 - SDMMC */ + /* CLK_DIV_FSYS3 */ + writel(0x00000100, &clk->div_fsys3); /* MMC4 - eMMC */ +} + diff --git a/board/samsung/origen_quad/dmc.c b/board/samsung/origen_quad/dmc.c new file mode 100644 index 0000000..0bb1164 --- /dev/null +++ b/board/samsung/origen_quad/dmc.c @@ -0,0 +1,163 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * + * Copyright (C) 2012 Insignal + * + * Memory setup for the Insignal OrigenQUAD board (Exynos4x12) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm/io.h> +#include <asm/arch/dmc.h> +#include <asm/arch/clock.h> +#include <asm/arch/cpu.h> +#include "setup.h" + +void mem_ctrl_init(void) +{ + struct exynos4_clock *clk = + (struct exynos4_clock *)EXYNOS4_CLOCK_BASE; + struct exynos4_dmc *dmc0 = + (struct exynos4_dmc *)(EXYNOS4_MIU_BASE); + struct exynos4_dmc *dmc1 = + (struct exynos4_dmc *)(EXYNOS4_MIU_BASE + 0x10000); + + /* Set DMC to 50MHz for IROM */ + writel(0x00117713, &clk->div_dmc0); + + /* + * DMC 0 + */ + writel(0xE3855403, &dmc0->phyzqcontrol); + writel(0x71101008, &dmc0->phycontrol0); + writel(0x7110100A, &dmc0->phycontrol0); + writel(0x00000084, &dmc0->phycontrol1); + writel(0x71101008, &dmc0->phycontrol0); + writel(0x0000008C, &dmc0->phycontrol1); + writel(0x00000084, &dmc0->phycontrol1); + writel(0x0000008C, &dmc0->phycontrol1); + writel(0x00000084, &dmc0->phycontrol1); + writel(0x0FFF30CA, &dmc0->concontrol); + writel(0x00202500, &dmc0->memcontrol); + writel(0x40C01323, &dmc0->memconfig0); + writel(0x80000007, &dmc0->ivcontrol); + + writel(0x64000000, &dmc0->prechconfig); + writel(0x9C4000FF, &dmc0->phycontrol0); + writel(0x0000005D, &dmc0->timingref); + +#if (CONFIG_CLK_MPLL == 330) + writel(0x2b47654e, &dmc0->timingrow); + writel(0x35330306, &dmc0->timingdata); + writel(0x442f0365, &dmc0->timingpower); +#else + writel(0x34498691, &dmc0->timingrow); + writel(0x36330306, &dmc0->timingdata); + writel(0x50380365, &dmc0->timingpower); +#endif + sdelay(0x100000); + + writel(0x07000000, &dmc0->directcmd); + sdelay(0x100000); + + writel(0x00071C00, &dmc0->directcmd); + sdelay(0x100000); + + writel(0x00010BFC, &dmc0->directcmd); + sdelay(0x100000); + + writel(0x00000608, &dmc0->directcmd); + writel(0x00000810, &dmc0->directcmd); + writel(0x00000C08, &dmc0->directcmd); + + /* + * DMC 1 + */ + writel(0xE3855403, &dmc1->phyzqcontrol); + writel(0x71101008, &dmc1->phycontrol0); + writel(0x7110100A, &dmc1->phycontrol0); + writel(0x00000084, &dmc1->phycontrol1); + writel(0x71101008, &dmc1->phycontrol0); + writel(0x0000008C, &dmc1->phycontrol1); + writel(0x00000084, &dmc1->phycontrol1); + writel(0x0000008C, &dmc1->phycontrol1); + writel(0x00000084, &dmc1->phycontrol1); + writel(0x0FFF30CA, &dmc1->concontrol); + writel(0x00202500, &dmc1->memcontrol); + writel(0x40C01323, &dmc1->memconfig0); + writel(0x80000007, &dmc1->ivcontrol); + writel(0x64000000, &dmc1->prechconfig); + writel(0x9C4000FF, &dmc1->phycontrol0); + writel(0x0000005D, &dmc1->timingref); + +#if (CONFIG_CLK_MPLL == 330) + writel(0x2b47654e, &dmc1->timingrow); + writel(0x35330306, &dmc1->timingdata); + writel(0x442f0365, &dmc1->timingpower); +#else + writel(0x34498691, &dmc1->timingrow); + writel(0x36330306, &dmc1->timingdata); + writel(0x50380365, &dmc1->timingpower); +#endif + sdelay(0x100000); + + writel(0x07000000, &dmc1->directcmd); + sdelay(0x100000); + + writel(0x00071C00, &dmc1->directcmd); + sdelay(0x100000); + + writel(0x00010BFC, &dmc1->directcmd); + sdelay(0x100000); + + writel(0x00000608, &dmc1->directcmd); + writel(0x00000810, &dmc1->directcmd); + writel(0x00000C08, &dmc1->directcmd); +} + +void mem_ctrl_init_2nd(void) +{ + struct exynos4_dmc *dmc0 = + (struct exynos4_dmc *)(EXYNOS4_MIU_BASE); + struct exynos4_dmc *dmc1 = + (struct exynos4_dmc *)(EXYNOS4_MIU_BASE + 0x10000); + + writel(0x7F10100A, &dmc0->phycontrol0); + writel(0xE0000084, &dmc0->phycontrol1); + writel(0x7F10100B, &dmc0->phycontrol0); + sdelay(20000); + writel(0x0000008C, &dmc0->phycontrol1); + writel(0x00000084, &dmc0->phycontrol1); + sdelay(20000); + + writel(0x7F10100A, &dmc1->phycontrol0); + writel(0xE0000084, &dmc1->phycontrol1); + writel(0x7F10100B, &dmc1->phycontrol0); + sdelay(20000); + writel(0x0000008C, &dmc1->phycontrol1); + writel(0x00000084, &dmc1->phycontrol1); + sdelay(20000); + + writel(0x0FFF30FA, &dmc0->concontrol); + writel(0x0FFF30FA, &dmc1->concontrol); + writel(0x00202533, &dmc0->memcontrol); + writel(0x00202533, &dmc1->memcontrol); +} diff --git a/board/samsung/origen_quad/lowlevel_init.S b/board/samsung/origen_quad/lowlevel_init.S new file mode 100644 index 0000000..fd30e11 --- /dev/null +++ b/board/samsung/origen_quad/lowlevel_init.S @@ -0,0 +1,151 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * + * Copyright (C) 2012 Insignal + * + * Lowlevel initialize for the Insignal OrigenQUAD board (Exynos4x12) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <version.h> +#include <asm/arch/cpu.h> +#include "setup.h" + +_TEXT_BASE: + .word CONFIG_SYS_TEXT_BASE + + .globl lowlevel_init +lowlevel_init: + + /* use iRAM stack in bl2 */ + ldr sp, =0x02060000 + stmdb r13!, {ip,lr} + + /* check reset status */ + ldr r0, =(EXYNOS4_POWER_BASE + 0x800) /* INFORM1 */ + ldr r1, [r0] + + /* AFTR wakeup reset */ + ldr r2, =S5P_CHECK_DIDLE + cmp r1, r2 + beq exit_wakeup + + /* LPA wakeup reset */ + ldr r2, =S5P_CHECK_LPA + cmp r1, r2 + beq exit_wakeup + + /* Sleep wakeup reset */ + ldr r2, =S5P_CHECK_SLEEP + cmp r1, r2 + beq wakeup_reset + + /* + * If U-boot is already running in RAM, no need to relocate U-Boot. + * Memory controller must be configured before relocating U-Boot + * in ram. + */ + ldr r0, =0x0ffffff /* r0 <- Mask Bits*/ + bic r1, pc, r0 /* pc <- current addr of code */ + /* r1 <- unmasked bits of pc */ + ldr r2, _TEXT_BASE /* r2 <- original base addr in ram */ + bic r2, r2, r0 /* r2 <- unmasked bits of r2*/ + cmp r1, r2 /* compare r1, r2 */ + beq 1f /* r0 == r1 then skip sdram init */ + + /* DMC initialize */ + bl mem_ctrl_init + + /* CMU initialize */ + bl clock_ctrl_init + + /* DMC initialize */ + bl mem_ctrl_init_2nd + +1: + /* Trust zone initialize */ + bl tzpc_init + ldmia r13!, {ip,pc} + +wakeup_reset: + bl clock_ctrl_init + bl mem_ctrl_init + bl tzpc_init + +exit_wakeup: + /* Load return address and jump to kernel */ + ldr r0, =(EXYNOS4_POWER_BASE + 0x800) /* INFORM0 */ + + /* r1 = physical address of exynos4_cpu_resume function*/ + ldr r1, [r0] + + /* Jump to kernel */ + mov pc, r1 + nop + nop + +/* + * Setting TZPC[TrustZone Protection Controller] + */ +tzpc_init: + + ldr r0, =TZPC0_BASE + mov r1, #0x0 + str r1, [r0] + mov r1, #0xff + str r1, [r0, #TZPC_DECPROT0SET_OFFSET] + str r1, [r0, #TZPC_DECPROT1SET_OFFSET] + mov r1, #0xbd + str r1, [r0, #TZPC_DECPROT2SET_OFFSET] + mov r1, #0xff + str r1, [r0, #TZPC_DECPROT3SET_OFFSET] + + ldr r0, =TZPC1_BASE + str r1, [r0, #TZPC_DECPROT0SET_OFFSET] + str r1, [r0, #TZPC_DECPROT1SET_OFFSET] + str r1, [r0, #TZPC_DECPROT2SET_OFFSET] + str r1, [r0, #TZPC_DECPROT3SET_OFFSET] + + ldr r0, =TZPC2_BASE + str r1, [r0, #TZPC_DECPROT0SET_OFFSET] + str r1, [r0, #TZPC_DECPROT1SET_OFFSET] + str r1, [r0, #TZPC_DECPROT2SET_OFFSET] + str r1, [r0, #TZPC_DECPROT3SET_OFFSET] + + ldr r0, =TZPC3_BASE + str r1, [r0, #TZPC_DECPROT0SET_OFFSET] + str r1, [r0, #TZPC_DECPROT1SET_OFFSET] + str r1, [r0, #TZPC_DECPROT2SET_OFFSET] + str r1, [r0, #TZPC_DECPROT3SET_OFFSET] + + ldr r0, =TZPC4_BASE + str r1, [r0, #TZPC_DECPROT0SET_OFFSET] + str r1, [r0, #TZPC_DECPROT1SET_OFFSET] + str r1, [r0, #TZPC_DECPROT2SET_OFFSET] + str r1, [r0, #TZPC_DECPROT3SET_OFFSET] + + ldr r0, =TZPC5_BASE + str r1, [r0, #TZPC_DECPROT0SET_OFFSET] + str r1, [r0, #TZPC_DECPROT1SET_OFFSET] + str r1, [r0, #TZPC_DECPROT2SET_OFFSET] + str r1, [r0, #TZPC_DECPROT3SET_OFFSET] + + mov pc, lr diff --git a/board/samsung/origen_quad/origen_quad.c b/board/samsung/origen_quad/origen_quad.c new file mode 100644 index 0000000..583fab0 --- /dev/null +++ b/board/samsung/origen_quad/origen_quad.c @@ -0,0 +1,163 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * + * Copyright (C) 2012 Insignal + * + * Board initialize for the Insignal OrigenQUAD board (Exynos4x12) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <netdev.h> +#include <asm/arch/cpu.h> +#include <asm/arch/gpio.h> +#include <asm/arch/mmc.h> +#include <asm/arch/pinmux.h> +#include <asm/arch/power.h> +#include <asm/arch/clock.h> +#include "setup.h" + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_DISPLAY_BOARDINFO +int checkboard(void) +{ + printf("\nBoard: " CONFIG_BOARDNAME "\n"); + return 0; +} +#endif + + +int board_init(void) +{ +#ifdef CONFIG_EXYNOS_SPI + spi_init(); +#endif + return 0; +} + +int dram_init(void) +{ + gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE) + + get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE) + + get_ram_size((long *)PHYS_SDRAM_3, PHYS_SDRAM_3_SIZE) + + get_ram_size((long *)PHYS_SDRAM_4, PHYS_SDRAM_4_SIZE); + +#ifdef CONFIG_RESERVED_DRAM + gd->ram_size -= CONFIG_RESERVED_DRAM; +#endif + + return 0; +} + +void dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = + get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); + gd->bd->bi_dram[1].start = PHYS_SDRAM_2; + gd->bd->bi_dram[1].size = + get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE); + gd->bd->bi_dram[2].start = PHYS_SDRAM_3; + gd->bd->bi_dram[2].size = + get_ram_size((long *)PHYS_SDRAM_3, PHYS_SDRAM_3_SIZE); + gd->bd->bi_dram[3].start = PHYS_SDRAM_4; + gd->bd->bi_dram[3].size = + get_ram_size((long *)PHYS_SDRAM_4, PHYS_SDRAM_4_SIZE); + +#ifdef CONFIG_RESERVED_DRAM + gd->bd->bi_dram[CONFIG_NR_DRAM_BANKS - 1].size -= CONFIG_RESERVED_DRAM; +#endif +} + +#ifdef CONFIG_GENERIC_MMC +int board_emmc_init(void) +{ + int err; + err = exynos_pinmux_config(PERIPH_ID_SDMMC0, PINMUX_FLAG_8BIT_MODE); + if (err) { + debug("SDMMC0 not configured\n"); + return err; + } + return s5p_mmc_init(0, 8); +} + +int board_sdmmc_init(void) +{ + int err; + err = exynos_pinmux_config(PERIPH_ID_SDMMC2, PINMUX_FLAG_NONE); + if (err) { + debug("SDMMC2 not configured\n"); + return err; + } + return s5p_mmc_init(2, 4); +} + +int board_mmc_init(bd_t *bis) +{ + int err; + + struct exynos4_power *power = + (struct exynos4_power *)samsung_get_base_power(); + + if ((power->om_stat & 0x1E) == 0x8) { + err = board_emmc_init(); + err = board_sdmmc_init(); + } else { + err = board_sdmmc_init(); + err = board_emmc_init(); + } + + return 0; +} +#endif + +int board_eth_init(bd_t *bis) +{ +#ifdef CONFIG_SMC911X + if (smc9115_pre_init()) + return -1; + return smc911x_initialize(0, CONFIG_SMC911X_BASE); +#endif + return 0; +} + +static int board_uart_init(void) +{ + int err; + err = exynos_pinmux_config(PERIPH_ID_UART, PINMUX_FLAG_NONE); + if (err) + debug("UART%d not configured\n", + PERIPH_ID_UART - PERIPH_ID_UART0); + return err; +} + +#ifdef CONFIG_BOARD_EARLY_INIT_F +int board_early_init_f(void) +{ + int err; + err = board_uart_init(); + if (err) + debug("UART%d init failed\n", + PERIPH_ID_UART - PERIPH_ID_UART0); + return err; +} +#endif diff --git a/board/samsung/origen_quad/setup.h b/board/samsung/origen_quad/setup.h new file mode 100644 index 0000000..6df4341 --- /dev/null +++ b/board/samsung/origen_quad/setup.h @@ -0,0 +1,300 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * + * Copyright (C) 2012 Insignal + * + * Configuration settings for the Insignal Origen QUAD board (Exynos4412) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __SETUP_ORIGEN_QUAD_H +#define __SETUP_ORIGEN_QUAD_H + +#include <config.h> +#include <version.h> +#include <asm/arch/cpu.h> + +/* Set PLL */ +#define set_pll(mdiv, pdiv, sdiv) (1<<31 | mdiv<<16 | pdiv<<8 | sdiv) + +/* APLL */ +#define set_clk_div_cpu0(core2, apll, pclk_dbg, atb, periph, corem1, corem0, core) \ + ((core2 << 28) \ + |(apll << 24) \ + |(pclk_dbg << 20) \ + |(atb << 16) \ + |(periph <<12) \ + |(corem1 << 8) \ + |(corem0 << 4) \ + |(core)) +#define set_clk_div_cpu1(cores, hpm, copy) \ + ((cores << 8) \ + |(hpm << 4) \ + |(copy)) + +#if (CONFIG_CLK_APLL == 800) +#define APLL_CON0_VAL set_pll(0x64, 0x3, 0x0) +#define CLK_DIV_CPU0_VAL set_clk_div_cpu0(0, 1, 1, 3, 7, 5, 2, 0) +#define CLK_DIV_CPU1_VAL set_clk_div_cpu1(3, 0, 3) +#elif (CONFIG_CLK_APLL == 1000) +#define APLL_CON0_VAL set_pll(0x7D, 0x3, 0x0) +#define CLK_DIV_CPU0_VAL set_clk_div_cpu0(0, 1, 1, 4, 7, 5, 2, 0) +#define CLK_DIV_CPU1_VAL set_clk_div_cpu1(3, 0, 4) +#elif (CONFIG_CLK_APLL == 1100) +#define APLL_CON0_VAL set_pll(0x113, 0x6, 0x0) +#define CLK_DIV_CPU0_VAL set_clk_div_cpu0(0, 2, 1, 4, 7, 6, 3, 0) +#define CLK_DIV_CPU1_VAL set_clk_div_cpu1(4, 0, 4) +#elif (CONFIG_CLK_APLL == 1200) +#define APLL_CON0_VAL set_pll(0x96, 0x3, 0x0) +#define CLK_DIV_CPU0_VAL set_clk_div_cpu0(0, 2, 1, 5, 7, 7, 3, 0) +#define CLK_DIV_CPU1_VAL set_clk_div_cpu1(4, 0, 4) +#elif (CONFIG_CLK_APLL == 1300) +#define APLL_CON0_VAL set_pll(0x145, 0x6, 0x0) +#define CLK_DIV_CPU0_VAL set_clk_div_cpu0(0, 2, 1, 5, 7, 7, 3, 0) +#define CLK_DIV_CPU1_VAL set_clk_div_cpu1(5, 0, 5) +#elif (CONFIG_CLK_APLL == 1400) +#define APLL_CON0_VAL set_pll(0xAF, 0x3, 0x0) +#define CLK_DIV_CPU0_VAL set_clk_div_cpu0(0, 2, 1, 6, 7, 7, 3, 0) +#define CLK_DIV_CPU1_VAL set_clk_div_cpu1(5, 0, 6) +#elif (CONFIG_CLK_APLL == 1500) +#define APLL_CON0_VAL set_pll(0xFA, 0x3, 0x0) +#define CLK_DIV_CPU0_VAL set_clk_div_cpu0(0, 2, 1, 6, 7, 7, 4, 0) +#define CLK_DIV_CPU1_VAL set_clk_div_cpu1(5, 0, 6) +#else +#error Not supported APLL freq +#endif + +#define APLL_CON1_VAL (0x00803800) +#define APLL_LOCK_VAL (((APLL_CON0_VAL >> 8) & 0x3F) * 270) + +/* EPLL */ +#define EPLL_CON0_VAL set_pll(0x40, 0x2, 0x3) +#define EPLL_CON1_VAL (0x66010000) +#define EPLL_CON2_VAL (0x00000080) +#define EPLL_LOCK_VAL (((EPLL_CON0_VAL >> 8) & 0x3F) * 3000) + +/* MPLL */ +#if (CONFIG_CLK_MPLL == 200) +#define MPLL_CON0_VAL set_pll(0x64, 0x3, 0x1) +#elif (CONFIG_CLK_MPLL == 330) +#define MPLL_CON0_VAL set_pll(0x116, 0x5, 0x1) +#elif (CONFIG_CLK_MPLL == 400) +#define MPLL_CON0_VAL set_pll(0x64, 0x3, 0x0) +#else +#error Not supported MPLL freq +#endif +#define MPLL_CON1_VAL (0x00803800) +#define MPLL_LOCK_VAL (((MPLL_CON0_VAL >> 8) & 0x3F) * 270) + +/* VPLL */ +#define VPLL_CON0_VAL set_pll(0x48, 0x2, 0x3) +#define VPLL_CON1_VAL (0x66010000) +#define VPLL_CON2_VAL (0x00000080) +#define VPLL_LOCK_VAL (((EPLL_CON0_VAL >> 8) & 0x3F) * 3000) + +/* CLK_SRC_CPU */ +#define MUX_MPLL_USER_SEL 1 +#define MUX_HPM_SEL 0 +#define MUX_CORE_SEL 0 +#define MUX_APLL_SEL 1 +#define CLK_SRC_CPU_VAL ((MUX_MPLL_USER_SEL << 24) \ + |(MUX_HPM_SEL << 20) \ + |(MUX_CORE_SEL << 16) \ + |(MUX_APLL_SEL)) + +/* CLK_SRC_TOP0 */ +#define MUX_ONENAND_SEL 0x0 /* 0 = DOUT133, 1 = DOUT166 */ +#define MUX_ACLK_133_SEL 0x0 /* 0 = SCLKMPLL, 1 = SCLKAPLL */ +#define MUX_ACLK_160_SEL 0x0 +#define MUX_ACLK_100_SEL 0x0 +#define MUX_ACLK_200_SEL 0x0 +#define MUX_VPLL_SEL 0x1 +#define MUX_EPLL_SEL 0x1 +#define CLK_SRC_TOP0_VAL ((MUX_ONENAND_SEL << 28) \ + |(MUX_ACLK_133_SEL << 24) \ + |(MUX_ACLK_160_SEL << 20) \ + |(MUX_ACLK_100_SEL << 16) \ + |(MUX_ACLK_200_SEL << 12) \ + |(MUX_VPLL_SEL << 8) \ + |(MUX_EPLL_SEL << 4)) + +/* CLK_SRC_TOP1 */ +#define VPLLSRC_SEL 0x0 /* 0 = FINPLL, 1 = SCLKHDMI27M */ +#define CLK_SRC_TOP1_VAL (0x01111000) + +/* CLK_DIV_TOP */ +#define ACLK_400_MCUISP_RATIO 0x1 +#define ACLK_266_GPS_RATIO 0x2 +#define ONENAND_RATIO 0x1 +#define ACLK_133_RATIO 0x5 +#define ACLK_160_RATIO 0x4 +#define ACLK_100_RATIO 0x7 +#define ACLK_200_RATIO 0x4 +#define CLK_DIV_TOP_VAL ((ACLK_400_MCUISP_RATIO << 24) \ + |(ACLK_266_GPS_RATIO << 20) \ + |(ONENAND_RATIO << 16) \ + |(ACLK_133_RATIO << 12) \ + |(ACLK_160_RATIO << 8) \ + |(ACLK_100_RATIO << 4) \ + |(ACLK_200_RATIO)) + +/* CLK_SRC_LEFTBUS */ +#define CLK_SRC_LEFTBUS_VAL (0x10) + +/* CLK_DIV_LEFRBUS */ +#define GPL_RATIO 0x1 +#define GDL_RATIO 0x3 +#define CLK_DIV_LEFTBUS_VAL ((GPL_RATIO << 4)|(GDL_RATIO)) + +/* CLK_SRC_RIGHTBUS */ +#define CLK_SRC_RIGHTBUS_VAL (0x10) + +/* CLK_DIV_RIGHTBUS */ +#define GPR_RATIO 0x1 +#define GDR_RATIO 0x3 +#define CLK_DIV_RIGHTBUS_VAL ((GPR_RATIO << 4)|(GDR_RATIO)) + +/* CLK_SRC_DMC */ +#define MUX_PWI_SEL 0x1 +#define MUX_CORE_TIMERS_SEL 0x1 +#define MUX_DPHY_SEL 0x0 +#define MUX_DMC_BUS_SEL 0x0 +#define CLK_SRC_DMC_VAL ((MUX_PWI_SEL << 16) \ + |(MUX_CORE_TIMERS_SEL << 12) \ + |(MUX_DPHY_SEL << 8) \ + |(MUX_DMC_BUS_SEL << 4)) + +/* CLK_DIV_DMC0 */ +#define CORE_TIMERS_RATIO 0x0 +#define COPY2_RATIO 0x0 +#define DMCP_RATIO 0x1 +#define DMCD_RATIO 0x1 +#if (CONFIG_CLK_MPLL == 200) +#define DMC_RATIO 0x3 +#else +#define DMC_RATIO 0x1 +#endif +#define DPHY_RATIO 0x1 +#define ACP_PCLK_RATIO 0x1 +#define ACP_RATIO 0x3 + +#define CLK_DIV_DMC0_VAL ((CORE_TIMERS_RATIO << 28) \ + |(COPY2_RATIO << 24) \ + |(DMCP_RATIO << 20) \ + |(DMCD_RATIO << 16) \ + |(DMC_RATIO << 12) \ + |(DPHY_RATIO << 8) \ + |(ACP_PCLK_RATIO << 4) \ + |(ACP_RATIO)) + +#define CLK_DIV_DMC1_VAL (0x07071713) + +/* CLK_SRC_PERIL0 */ +#define PWM_SEL 0 +#define UART4_SEL 6 +#define UART3_SEL 6 +#define UART2_SEL 6 +#define UART1_SEL 6 +#define UART0_SEL 6 +#define CLK_SRC_PERIL0_VAL ((PWM_SEL << 24) \ + |(UART4_SEL << 16) \ + |(UART3_SEL << 12) \ + |(UART2_SEL<< 8) \ + |(UART1_SEL << 4) \ + |(UART0_SEL)) + +/* CLK_DIV_PERIL0 */ +#define UART4_RATIO 7 +#define UART3_RATIO 7 +#define UART2_RATIO 7 +#define UART1_RATIO 7 +#define UART0_RATIO 7 +#define CLK_DIV_PERIL0_VAL ((UART4_RATIO << 16) \ + |(UART3_RATIO << 12) \ + |(UART2_RATIO << 8) \ + |(UART1_RATIO << 4) \ + |(UART0_RATIO)) + +/* Power Down Modes */ +#define S5P_CHECK_SLEEP 0x00000BAD +#define S5P_CHECK_DIDLE 0xBAD00000 +#define S5P_CHECK_LPA 0xABAD0000 + +/* TZPC */ +#define TZPC_BASE 0x10110000 +#define TZPC_OFFSET 0x10000 +#define TZPC0_BASE (TZPC_BASE) +#define TZPC1_BASE (TZPC0_BASE + TZPC_OFFSET) +#define TZPC2_BASE (TZPC1_BASE + TZPC_OFFSET) +#define TZPC3_BASE (TZPC2_BASE + TZPC_OFFSET) +#define TZPC4_BASE (TZPC3_BASE + TZPC_OFFSET) +#define TZPC5_BASE (TZPC4_BASE + TZPC_OFFSET) +#define TZPC_DECPROT0SET_OFFSET 0x804 +#define TZPC_DECPROT1SET_OFFSET 0x810 +#define TZPC_DECPROT2SET_OFFSET 0x81C +#define TZPC_DECPROT3SET_OFFSET 0x828 + +/* IMAGE SIZE (BYTE) */ +#define MBR_BYTE_COUNT CONFIG_MBR_SIZE +#define SBL_BYTE_COUNT CONFIG_SBL_SIZE +#define BL1_BYTE_COUNT CONFIG_BL1_SIZE +#define BL2_BYTE_COUNT CONFIG_BL2_SIZE +#define ENV_BYTE_COUNT CONFIG_ENV_SIZE + +/* IMAGE OFFSET (BYTE) */ +#define MBR_BYTE_OFFSET (0) +#define SBL_BYTE_OFFSET (MBR_BYTE_OFFSET + MBR_BYTE_COUNT) +#define BL1_BYTE_OFFSET (SBL_BYTE_OFFSET + SBL_BYTE_COUNT) +#define BL2_BYTE_OFFSET (BL1_BYTE_OFFSET + BL1_BYTE_COUNT) +#define ENV_BYTE_OFFSET (Bl2_BYTE_OFFSET + BL2_BYTE_COUNT) + +#define SDMMC_BLK_SIZE (512) + +/* IMAGE SIZE (BLOCK) */ +#define SBL_BLK_COUNT (SBL_BYTE_COUNT / SDMMC_BLK_SIZE) +#define BL1_BLK_COUNT (BL1_BYTE_COUNT / SDMMC_BLK_SIZE) +#define BL2_BLK_COUNT (BL2_BYTE_COUNT / SDMMC_BLK_SIZE) +#define ENV_BLK_COUNT (ENV_BYTE_COUNT / SDMMC_BLK_SIZE) + +/* IMAGE OFFSET (BLOCK) */ +#define SBL_BLK_OFFSET (SBL_BYTE_OFFSET / SDMMC_BLK_SIZE) +#define BL1_BLK_OFFSET (BL1_BYTE_OFFSET / SDMMC_BLK_SIZE) +#define BL2_BLK_OFFSET (BL2_BYTE_OFFSET / SDMMC_BLK_SIZE) +#define ENV_BLK_OFFSET (ENV_BYTE_OFFSET / SDMMC_BLK_SIZE) + +/* UART */ +#if defined(CONFIG_SERIAL0) +#define PERIPH_ID_UART PERIPH_ID_UART0 +#elif defined(CONFIG_SERIAL1) +#define PERIPH_ID_UART PERIPH_ID_UART1 +#elif defined(CONFIG_SERIAL2) +#define PERIPH_ID_UART PERIPH_ID_UART2 +#elif defined(CONFIG_SERIAL3) +#define PERIPH_ID_UART PERIPH_ID_UART3 +#endif + +#ifndef __ASSEMBLY__ +void sdelay(unsigned long); +void clock_ctrl_init(void); +void mem_ctrl_init(void); +void tzpc_init(void); +#endif + +#endif /* __SETUP_ORIGEN_QUAD_H */ diff --git a/boards.cfg b/boards.cfg index 388e4a4..66b9ee3 100644 --- a/boards.cfg +++ b/boards.cfg @@ -284,6 +284,7 @@ s5pc210_universal arm armv7 universal_c210 samsung smdk5250 arm armv7 smdk5250 samsung exynos smdkv310 arm armv7 smdkv310 samsung exynos trats arm armv7 trats samsung exynos +origen_quad arm armv7 origen_quad samsung exynos harmony arm armv7:arm720t harmony nvidia tegra20 seaboard arm armv7:arm720t seaboard nvidia tegra20 ventana arm armv7:arm720t ventana nvidia tegra20 diff --git a/include/configs/origen_quad.h b/include/configs/origen_quad.h new file mode 100644 index 0000000..d81eeb3 --- /dev/null +++ b/include/configs/origen_quad.h @@ -0,0 +1,179 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * + * Copyright (C) 2012 Insignal + * + * Configuration settings for the Insignal OrigenQUAD board (Exynos4x12) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_ORIGEN_QUAD_H +#define __CONFIG_ORIGEN_QUAD_H + +/* + * High Level Configuration Options + */ +#define CONFIG_SAMSUNG /* in a SAMSUNG core */ +#define CONFIG_S5P /* S5P Family */ +#define CONFIG_EXYNOS4 /* which is in a Exynos4 series */ +#define CONFIG_EXYNOS4412 /* which is in a Exynos4412 */ +#define CONFIG_ORIGEN_QUAD /* which is in a ORIGEN QUAD */ +#define CONFIG_BOARDNAME "Origen" +#define CONFIG_IDENT_STRING " for Insignal Origen" +#define CONFIG_MACH_TYPE 3455 + +#include <asm/arch/cpu.h> /* get chip and board defs */ + +/* + * Clock / PLL + */ +#define CONFIG_SYS_CLK_FREQ 24000000 /* 24MHz input clock */ +#define CONFIG_CLK_APLL 1400 +#define CONFIG_CLK_MPLL 400 +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_PWM + +/* + * Memory + */ +/* Default address */ +#define CONFIG_SYS_SDRAM_BASE 0x40000000 +#define CONFIG_SYS_TEXT_BASE 0x43E00000 +#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - GENERATED_GBL_DATA_SIZE) +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20UL)) +/* Cache */ +#define CONFIG_L2_OFF 1 +#define CONFIG_SYS_DCACHE_OFF /* Keep L2 Cache Disabled */ +/* DRAM */ +#define CONFIG_NR_DRAM_BANKS 4 /* 256 MB * 4 = 1 GB */ +#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */ +#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE +#define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE +#define PHYS_SDRAM_2 (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE) +#define PHYS_SDRAM_2_SIZE SDRAM_BANK_SIZE +#define PHYS_SDRAM_3 (PHYS_SDRAM_2 + PHYS_SDRAM_2_SIZE) +#define PHYS_SDRAM_3_SIZE SDRAM_BANK_SIZE +#define PHYS_SDRAM_4 (PHYS_SDRAM_3 + PHYS_SDRAM_3_SIZE) +#define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE +/* Reserved */ +#define CONFIG_RESERVED_DRAM 0x100000 +/* Mem test */ +#define CONFIG_CMD_MEMORY +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_4 + PHYS_SDRAM_4_SIZE - (8UL << 20UL)) + +/* + * Serial + */ +#define CONFIG_SERIAL2 2 /* use SERIAL2 in 0~3 */ +#define CONFIG_SERIAL_MULTI 1 +#define CONFIG_BAUDRATE 115200 + +/* + * SD/MMC + */ +#define CONFIG_GENERIC_MMC +#define CONFIG_MMC +#define CONFIG_SDHCI +#define CONFIG_S5P_SDHCI +#define CONFIG_CMD_MMC + +/* + * File System + */ +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT2 + +/* + * Flash + */ +#define CONFIG_SYS_NO_FLASH + +/* + * Image map on sdmmc/emmc + */ +#define CONFIG_SECURE_BL1_ONLY +#define CONFIG_SPL +#define CONFIG_MBR_SIZE (512) +#define CONFIG_SBL_SIZE (8UL << 10) /* 8KB */ +#define CONFIG_BL1_SIZE (16UL << 10) /* 16KB */ +#define CONFIG_BL2_SIZE (512UL << 10) /* 512KB */ + +/* + * Console + */ +#define CONFIG_SYS_PROMPT CONFIG_BOARDNAME " # " +/* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 256 +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE 384 +/* max number of command args */ +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ + +/* + * Commands + */ +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#include <config_cmd_default.h> +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS + +/* + * Environment + */ +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_ENV_OFFSET (CONFIG_MBR_SIZE \ + +CONFIG_SBL_SIZE \ + +CONFIG_BL1_SIZE \ + +CONFIG_BL2_SIZE) +#define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */ +#define CONFIG_ENV_OVERWRITE +/* Default */ +#define CONFIG_BOOTCOMMAND "fatload mmc 0 40008000 uImage; bootm 40008000" + +/* + * Misc + */ +/* Initialize */ +#define CONFIG_ARCH_CPU_INIT 1 +#define CONFIG_BOARD_EARLY_INIT_F 1 +/* display information */ +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO +/* Delay */ +#define CONFIG_BOOTDELAY 3 +#define CONFIG_ZERO_BOOTDELAY_CHECK +/* TAGS */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_CMDLINE_TAG +#define CONFIG_INITRD_TAG +/* Enable devicetree support */ +#define CONFIG_OF_LIBFDT +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#endif /* __CONFIG_ORIGEN_QUAD_H */ diff --git a/tools/Makefile b/tools/Makefile index 686840a..3da314c 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -68,6 +68,7 @@ BIN_FILES-$(CONFIG_CMD_LOADS) += img2srec$(SFX) BIN_FILES-$(CONFIG_XWAY_SWAP_BYTES) += xway-swap-bytes$(SFX) BIN_FILES-y += mkenvimage$(SFX) BIN_FILES-y += mkimage$(SFX) +BIN_FILES-$(CONFIG_EXYNOS4) += mk$(BOARD)spl$(SFX) BIN_FILES-$(CONFIG_SMDK5250) += mksmdk5250spl$(SFX) BIN_FILES-$(CONFIG_MX28) += mxsboot$(SFX) BIN_FILES-$(CONFIG_NETCONSOLE) += ncb$(SFX) @@ -97,6 +98,7 @@ NOPED_OBJ_FILES-y += imximage.o NOPED_OBJ_FILES-y += omapimage.o NOPED_OBJ_FILES-y += mkenvimage.o NOPED_OBJ_FILES-y += mkimage.o +OBJ_FILES-$(CONFIG_EXYNOS4) += mkexynosspl.o OBJ_FILES-$(CONFIG_SMDK5250) += mkexynosspl.o OBJ_FILES-$(CONFIG_MX28) += mxsboot.o OBJ_FILES-$(CONFIG_NETCONSOLE) += ncb.o
ORIGEN_QUAD board is based on Samsung's Exynos4412 SoC. Signed-off-by: Jeong-Hyeon Kim <jhkim@insignal.co.kr> --- Makefile | 2 +- board/samsung/origen_quad/Makefile | 59 ++++++ board/samsung/origen_quad/boot.c | 72 +++++++ board/samsung/origen_quad/clock.c | 103 ++++++++++ board/samsung/origen_quad/dmc.c | 163 ++++++++++++++++ board/samsung/origen_quad/lowlevel_init.S | 151 +++++++++++++++ board/samsung/origen_quad/origen_quad.c | 163 ++++++++++++++++ board/samsung/origen_quad/setup.h | 300 +++++++++++++++++++++++++++++ boards.cfg | 1 + include/configs/origen_quad.h | 179 +++++++++++++++++ tools/Makefile | 2 + 11 files changed, 1194 insertions(+), 1 deletion(-) create mode 100644 board/samsung/origen_quad/Makefile create mode 100644 board/samsung/origen_quad/boot.c create mode 100644 board/samsung/origen_quad/clock.c create mode 100644 board/samsung/origen_quad/dmc.c create mode 100644 board/samsung/origen_quad/lowlevel_init.S create mode 100644 board/samsung/origen_quad/origen_quad.c create mode 100644 board/samsung/origen_quad/setup.h create mode 100644 include/configs/origen_quad.h