Patchwork [U-Boot,3/3] powerpc/mpc83xx: convert MPC8313ERDB to new-SPL

login
register
mail settings
Submitter Scott Wood
Date Dec. 6, 2012, 11:33 p.m.
Message ID <1354836798-17441-3-git-send-email-scottwood@freescale.com>
Download mbox | patch
Permalink /patch/204347/
State Accepted
Delegated to: Kim Phillips
Headers show

Comments

Scott Wood - Dec. 6, 2012, 11:33 p.m.
This converts MPC8313ERDB NAND boot to use the new SPL infrastructure.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Cc: Kim Phillips <kim.phillips@freescale.com>
---
 board/freescale/mpc8313erdb/mpc8313erdb.c       |   10 +--
 boards.cfg                                      |    4 +-
 include/configs/MPC8313ERDB.h                   |   43 ++++++---
 nand_spl/board/freescale/mpc8313erdb/Makefile   |  108 -----------------------
 nand_spl/board/freescale/mpc8313erdb/u-boot.lds |   55 ------------
 5 files changed, 37 insertions(+), 183 deletions(-)
 delete mode 100644 nand_spl/board/freescale/mpc8313erdb/Makefile
 delete mode 100644 nand_spl/board/freescale/mpc8313erdb/u-boot.lds

Patch

diff --git a/board/freescale/mpc8313erdb/mpc8313erdb.c b/board/freescale/mpc8313erdb/mpc8313erdb.c
index 1071803..648f0ec 100644
--- a/board/freescale/mpc8313erdb/mpc8313erdb.c
+++ b/board/freescale/mpc8313erdb/mpc8313erdb.c
@@ -31,7 +31,7 @@ 
 #include <vsc7385.h>
 #include <ns16550.h>
 #include <nand.h>
-#if defined(CONFIG_MPC83XX_GPIO) && !defined(CONFIG_NAND_SPL)
+#if defined(CONFIG_MPC83XX_GPIO) && !defined(CONFIG_SPL_BUILD)
 #include <asm/gpio.h>
 #endif
 
@@ -45,7 +45,7 @@  int board_early_init_f(void)
 	if (im->pmc.pmccr1 & PMCCR1_POWER_OFF)
 		gd->flags |= GD_FLG_SILENT;
 #endif
-#if defined(CONFIG_MPC83XX_GPIO) && !defined(CONFIG_NAND_SPL)
+#if defined(CONFIG_MPC83XX_GPIO) && !defined(CONFIG_SPL_BUILD)
 	mpc83xx_gpio_init_f();
 #endif
 
@@ -54,7 +54,7 @@  int board_early_init_f(void)
 
 int board_early_init_r(void)
 {
-#if defined(CONFIG_MPC83XX_GPIO) && !defined(CONFIG_NAND_SPL)
+#if defined(CONFIG_MPC83XX_GPIO) && !defined(CONFIG_SPL_BUILD)
 	mpc83xx_gpio_init_r();
 #endif
 
@@ -67,7 +67,7 @@  int checkboard(void)
 	return 0;
 }
 
-#ifndef CONFIG_NAND_SPL
+#ifndef CONFIG_SPL_BUILD
 static struct pci_region pci_regions[] = {
 	{
 		.bus_start = CONFIG_SYS_PCI1_MEM_BASE,
@@ -140,7 +140,7 @@  void ft_board_setup(void *blob, bd_t *bd)
 #endif
 }
 #endif
-#else /* CONFIG_NAND_SPL */
+#else /* CONFIG_SPL_BUILD */
 void board_init_f(ulong bootflag)
 {
 	board_early_init_f();
diff --git a/boards.cfg b/boards.cfg
index 70a1569..c6d72fc 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -657,8 +657,8 @@  vme8349                      powerpc     mpc83xx     vme8349             esd
 MPC8308RDB                   powerpc     mpc83xx     mpc8308rdb          freescale
 MPC8313ERDB_33               powerpc     mpc83xx     mpc8313erdb         freescale      -           MPC8313ERDB:SYS_33MHZ
 MPC8313ERDB_66               powerpc     mpc83xx     mpc8313erdb         freescale      -           MPC8313ERDB:SYS_66MHZ
-MPC8313ERDB_NAND_33          powerpc     mpc83xx     mpc8313erdb         freescale      -           MPC8313ERDB:SYS_33MHZ,NAND_U_BOOT
-MPC8313ERDB_NAND_66          powerpc     mpc83xx     mpc8313erdb         freescale      -           MPC8313ERDB:SYS_66MHZ,NAND_U_BOOT
+MPC8313ERDB_NAND_33          powerpc     mpc83xx     mpc8313erdb         freescale      -           MPC8313ERDB:SYS_33MHZ,NAND
+MPC8313ERDB_NAND_66          powerpc     mpc83xx     mpc8313erdb         freescale      -           MPC8313ERDB:SYS_66MHZ,NAND
 MPC8315ERDB                  powerpc     mpc83xx     mpc8315erdb         freescale      -           MPC8315ERDB
 MPC8315ERDB_NAND             powerpc     mpc83xx     mpc8315erdb         freescale      -           MPC8315ERDB:NAND_U_BOOT
 MPC8323ERDB                  powerpc     mpc83xx     mpc8323erdb         freescale
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index fd80be5..275d4f2 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -35,6 +35,25 @@ 
 #define CONFIG_MPC8313		1
 #define CONFIG_MPC8313ERDB	1
 
+#ifdef CONFIG_NAND
+#define CONFIG_SPL
+#define CONFIG_SPL_INIT_MINIMAL
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_MINIMAL
+#define CONFIG_SPL_FLUSH_IMAGE
+#define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
+#define CONFIG_SPL_MPC83XX_WAIT_FOR_NAND
+
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_NS16550_MIN_FUNCTIONS
+#endif
+
+#define CONFIG_SYS_TEXT_BASE	0x00100000 /* CONFIG_SYS_NAND_U_BOOT_DST */
+#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000
+#define CONFIG_SPL_MAX_SIZE	(4 * 1024)
+#define CONFIG_SPL_PAD_TO	0xfff04000
+
 #define CONFIG_SYS_NAND_U_BOOT_SIZE  (512 << 10)
 #define CONFIG_SYS_NAND_U_BOOT_DST   0x00100000
 #define CONFIG_SYS_NAND_U_BOOT_START 0x00100100
@@ -42,13 +61,11 @@ 
 #define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000
 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000)
 
-#ifdef CONFIG_NAND_U_BOOT
-#define CONFIG_SYS_TEXT_BASE	0x00100000 /* CONFIG_SYS_NAND_U_BOOT_DST */
-#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000
-#ifdef CONFIG_NAND_SPL
+#ifdef CONFIG_SPL_BUILD
 #define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */
-#endif /* CONFIG_NAND_SPL */
-#endif /* CONFIG_NAND_U_BOOT */
+#endif
+
+#endif /* CONFIG_NAND */
 
 #ifndef CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_TEXT_BASE	0xFE000000
@@ -87,7 +104,7 @@ 
 
 #define CONFIG_SYS_IMMR		0xE0000000
 
-#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#if defined(CONFIG_NAND) && !defined(CONFIG_SPL_BUILD)
 #define CONFIG_DEFAULT_IMMR	CONFIG_SYS_IMMR
 #endif
 
@@ -227,7 +244,7 @@ 
 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
 
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) && \
-	!defined(CONFIG_NAND_SPL)
+	!defined(CONFIG_SPL_BUILD)
 #define CONFIG_SYS_RAMBOOT
 #endif
 
@@ -256,7 +273,7 @@ 
 #define CONFIG_SYS_LBC_MRTPR	0x20000000  /*TODO */
 
 /* drivers/mtd/nand/nand.c */
-#ifdef CONFIG_NAND_SPL
+#if defined(CONFIG_NAND) && defined(CONFIG_SPL_BUILD)
 #define CONFIG_SYS_NAND_BASE		0xFFF00000
 #else
 #define CONFIG_SYS_NAND_BASE		0xE2800000
@@ -292,7 +309,7 @@ 
 				| OR_FCM_EHTR)
 				/* 0xFFFF8396 */
 
-#ifdef CONFIG_NAND_U_BOOT
+#ifdef CONFIG_NAND
 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM
 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM
 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NOR_BR_PRELIM
@@ -449,7 +466,7 @@ 
 /*
  * Environment
  */
-#if defined(CONFIG_NAND_U_BOOT)
+#if defined(CONFIG_NAND)
 	#define CONFIG_ENV_IS_IN_NAND	1
 	#define CONFIG_ENV_OFFSET		(512 * 1024)
 	#define CONFIG_ENV_SECT_SIZE	CONFIG_SYS_NAND_BLOCK_SIZE
@@ -496,7 +513,7 @@ 
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_PCI
 
-#if defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_NAND_U_BOOT)
+#if defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_NAND)
     #undef CONFIG_CMD_SAVEENV
     #undef CONFIG_CMD_LOADS
 #endif
@@ -570,7 +587,7 @@ 
 	HRCWH_TSEC2M_IN_RGMII |\
 	HRCWH_BIG_ENDIAN)
 
-#ifdef CONFIG_NAND_SPL
+#ifdef CONFIG_NAND
 #define CONFIG_SYS_HRCW_HIGH (CONFIG_SYS_HRCW_HIGH_BASE |\
 		       HRCWH_FROM_0XFFF00100 |\
 		       HRCWH_ROM_LOC_NAND_SP_8BIT |\
diff --git a/nand_spl/board/freescale/mpc8313erdb/Makefile b/nand_spl/board/freescale/mpc8313erdb/Makefile
deleted file mode 100644
index f997b5f..0000000
--- a/nand_spl/board/freescale/mpc8313erdb/Makefile
+++ /dev/null
@@ -1,108 +0,0 @@ 
-#
-# (C) Copyright 2007
-# Stefan Roese, DENX Software Engineering, sr@denx.de.
-# (C) Copyright 2008 Freescale Semiconductor
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-NAND_SPL := y
-PAD_TO := 0xfff04000
-
-include $(TOPDIR)/config.mk
-
-nandobj	:= $(OBJTREE)/nand_spl/
-
-LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
-LDFLAGS := -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \
-	   $(LDFLAGS) $(LDFLAGS_FINAL)
-AFLAGS	+= -DCONFIG_NAND_SPL
-CFLAGS	+= -DCONFIG_NAND_SPL
-
-SOBJS	= start.o ticks.o
-COBJS	= nand_boot_fsl_elbc.o $(BOARD).o sdram.o ns16550.o spl_minimal.o \
-	  time.o cache.o
-
-SRCS	:= $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
-__OBJS	:= $(SOBJS) $(COBJS)
-LNDIR	:= $(nandobj)board/$(BOARDDIR)
-
-ALL	= $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
-
-all:	$(obj).depend $(ALL)
-
-$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl
-	$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
-
-$(nandobj)u-boot-spl.bin:	$(nandobj)u-boot-spl
-	$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
-
-$(nandobj)u-boot-spl:	$(OBJS) $(nandobj)u-boot.lds
-	cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \
-		-Map $(nandobj)u-boot-spl.map \
-		-o $(nandobj)u-boot-spl
-
-$(nandobj)u-boot.lds: $(LDSCRIPT)
-	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
-
-# create symbolic links for common files
-
-$(obj)start.S:
-	ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc83xx/start.S $(obj)start.S
-
-$(obj)nand_boot_fsl_elbc.c:
-	ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_elbc.c \
-	       $(obj)nand_boot_fsl_elbc.c
-
-$(obj)sdram.c:
-	ln -sf $(SRCTREE)/board/$(BOARDDIR)/sdram.c $(obj)sdram.c
-
-$(obj)$(BOARD).c:
-	ln -sf $(SRCTREE)/board/$(BOARDDIR)/$(BOARD).c $(obj)$(BOARD).c
-
-$(obj)ns16550.c:
-	ln -sf $(SRCTREE)/drivers/serial/ns16550.c $(obj)ns16550.c
-
-$(obj)spl_minimal.c:
-	ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc83xx/spl_minimal.c $(obj)spl_minimal.c
-
-$(obj)cache.c:
-	ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $(obj)cache.c
-
-$(obj)time.c:
-	ln -sf $(SRCTREE)/arch/powerpc/lib/time.c $(obj)time.c
-
-$(obj)ticks.S:
-	ln -sf $(SRCTREE)/arch/powerpc/lib/ticks.S $(obj)ticks.S
-
-#########################################################################
-
-$(obj)%.o:	$(obj)%.S
-	$(CC) $(AFLAGS) -c -o $@ $<
-
-$(obj)%.o:	$(obj)%.c
-	$(CC) $(CFLAGS) -c -o $@ $<
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/nand_spl/board/freescale/mpc8313erdb/u-boot.lds b/nand_spl/board/freescale/mpc8313erdb/u-boot.lds
deleted file mode 100644
index d140453..0000000
--- a/nand_spl/board/freescale/mpc8313erdb/u-boot.lds
+++ /dev/null
@@ -1,55 +0,0 @@ 
-/*
- * (C) Copyright 2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SECTIONS
-{
-	. = 0xfff00000;
-	.text : {
-		*(.text*)
-		. = ALIGN(16);
-		*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-	}
-
-	. = ALIGN(8);
-	.data : {
-		*(.data*)
-		*(.sdata*)
-		_GOT2_TABLE_ = .;
-		KEEP(*(.got2))
-		KEEP(*(.got))
-		PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
-	}
-	__got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
-
-	. = ALIGN(8);
-	__bss_start = .;
-	.bss (NOLOAD) : {
-		*(.*bss)
-	}
-	__bss_end__ = .;
-}
-ENTRY(_start)
-ASSERT(__bss_end__ <= 0xfff01000, "NAND bootstrap too big");