@@ -344,7 +344,7 @@ endif
ifeq ($(SOC),exynos)
LIBS-y += $(CPUDIR)/s5p-common/libs5p-common.o
endif
-ifeq ($(SOC),tegra20)
+ifneq ($(CONFIG_TEGRA),)
LIBS-y += arch/$(ARCH)/cpu/$(SOC)-common/lib$(SOC)-common.o
LIBS-y += arch/$(ARCH)/cpu/tegra-common/libcputegra-common.o
LIBS-y += $(CPUDIR)/tegra-common/libtegra-common.o
@@ -408,7 +408,7 @@ ALL-$(CONFIG_SPL) += $(obj)spl/u-boot-spl.bin
ALL-$(CONFIG_OF_SEPARATE) += $(obj)u-boot.dtb $(obj)u-boot-dtb.bin
# enable combined SPL/u-boot/dtb rules for tegra
-ifeq ($(SOC),tegra20)
+ifneq ($(CONFIG_TEGRA),)
ifeq ($(CONFIG_OF_SEPARATE),y)
ALL-y += $(obj)u-boot-dtb-tegra.bin
else
@@ -515,7 +515,7 @@ $(obj)u-boot.spr: $(obj)u-boot.img $(obj)spl/u-boot-spl.bin
conv=notrunc 2>/dev/null
cat $(obj)spl/u-boot-spl-pad.img $(obj)u-boot.img > $@
-ifeq ($(SOC),tegra20)
+ifneq ($(CONFIG_TEGRA),)
ifeq ($(CONFIG_OF_SEPARATE),y)
nodtb=dtb
dtbfile=$(obj)u-boot.dtb
@@ -32,7 +32,7 @@ COBJS += cache_v7.o
COBJS += cpu.o
COBJS += syslib.o
-ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA20),)
+ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA),)
SOBJS += lowlevel_init.o
endif
@@ -272,12 +272,12 @@ jump_2_ram:
/*
* Move vector table
*/
-#if !defined(CONFIG_TEGRA20)
+#if !defined(CONFIG_TEGRA)
/* Set vector address in CP15 VBAR register */
ldr r0, =_start
add r0, r0, r9
mcr p15, 0, r0, c12, c0, 0 @Set VBAR
-#endif /* !Tegra20 */
+#endif /* !Tegra */
ldr r0, _board_init_r_ofs
adr r1, _start
@@ -26,22 +26,30 @@
#include <linux/compiler.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
+#ifdef CONFIG_LCD
#include <asm/arch/display.h>
-#include <asm/arch/emc.h>
+#endif
#include <asm/arch/funcmux.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/pmu.h>
+#ifdef CONFIG_PWM_TEGRA
#include <asm/arch/pwm.h>
+#endif
#include <asm/arch/tegra.h>
-#include <asm/arch/usb.h>
#include <asm/arch-tegra/board.h>
#include <asm/arch-tegra/clk_rst.h>
#include <asm/arch-tegra/pmc.h>
#include <asm/arch-tegra/sys_proto.h>
#include <asm/arch-tegra/uart.h>
#include <asm/arch-tegra/warmboot.h>
-#include <spi.h>
+#ifdef CONFIG_TEGRA_CLOCK_SCALING
+#include <asm/arch/emc.h>
+#endif
+#ifdef CONFIG_USB_EHCI_TEGRA
+#include <asm/arch/usb.h>
+#endif
#include <i2c.h>
+#include <spi.h>
#include "emc.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -188,6 +196,9 @@ void gpio_early_init(void) __attribute__((weak, alias("__gpio_early_init")));
int board_early_init_f(void)
{
+#if defined(CONFIG_TEGRA30)
+ pinmux_init();
+#endif
board_init_uart_f();
/* Initialize periph GPIOs */
@@ -32,7 +32,7 @@ extern struct serial_device *default_serial_console(void);
defined(CONFIG_MB86R0x) || defined(CONFIG_MPC5xxx) || \
defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) || \
defined(CONFIG_MPC86xx) || defined(CONFIG_SYS_SC520) || \
- defined(CONFIG_TEGRA20) || defined(CONFIG_SYS_COREBOOT) || \
+ defined(CONFIG_TEGRA) || defined(CONFIG_SYS_COREBOOT) || \
defined(CONFIG_MICROBLAZE)
extern struct serial_device serial0_device;
extern struct serial_device serial1_device;
@@ -65,7 +65,7 @@ ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
LIBS-y += $(CPUDIR)/omap-common/libomap-common.o
endif
-ifeq ($(SOC),tegra20)
+ifneq ($(CONFIG_TEGRA),)
LIBS-y += arch/$(ARCH)/cpu/$(SOC)-common/lib$(SOC)-common.o
LIBS-y += arch/$(ARCH)/cpu/tegra-common/libcputegra-common.o
LIBS-y += $(CPUDIR)/tegra-common/libtegra-common.o
This patch adds basic Tegra30 (T30) build support - no specific board is targeted. Signed-off-by: Tom Warren <twarren@nvidia.com> --- V2: * Use generic CONFIG_TEGRA in Makefile instead of specific SOC test * Cleanup a couple of include files due to T20/T30 build differences * Move pinmux_init to board code Makefile | 6 +++--- arch/arm/cpu/armv7/Makefile | 2 +- arch/arm/cpu/armv7/start.S | 4 ++-- board/nvidia/common/board.c | 17 ++++++++++++++--- include/serial.h | 2 +- spl/Makefile | 2 +- 6 files changed, 22 insertions(+), 11 deletions(-)