| Submitter | Scott Wood |
|---|---|
| Date | Nov. 26, 2012, 9:49 p.m. |
| Message ID | <20121126214958.GA29518@tyr.buserror.net> |
| Download | mbox |
| Permalink | /patch/202037/ |
| State | Accepted |
| Delegated to: | Tom Rini |
| Headers | show |
Pull-request
git://git.denx.de/u-boot-nand-flash.git masterComments
On Mon, Nov 26, 2012 at 03:49:58PM -0600, Scott Wood wrote: > The following changes since commit 178d0cc1a4c73c3341afbeb2a93b172de8c96bd1: > > Merge branch 'master' of git://git.denx.de/u-boot-video (2012-11-19 09:28:04 -0700) > > are available in the git repository at: > > > git://git.denx.de/u-boot-nand-flash.git master > > for you to fetch changes up to 3287f6d3858faee768a7c47515bd21914ad591a2: > > nand: Add torture feature (2012-11-26 15:41:29 -0600) > > ---------------------------------------------------------------- > Beno?t Th?baudeau (3): > nand: Clean up nand_util > nand: Fix nand_erase_opts() offset check > nand: Add torture feature > > Joe Hershberger (1): > nand: Move the sub-page read support enable to a flag > > Jos? Miguel Gon?alves (1): > Add u-boot-pad.bin target to the Makefile > > Karl O. Pinc (1): > README: Reference nand monitor commands in U-Boot README > > Prabhakar Kushwaha (1): > driver/mtd:IFC NAND:Initialise internal SRAM before any write > > Scott Wood (22): > serial/ns16550: don't build serial_ns16550 with MIN_FUNCTIONS > serial/ns16550: wait for TEMT before initializing > powerpc/mpc85xx: move debug tlb entry after TLB is in known state > powerpc/mpc85xx: add comma before "already enabled" > spl: rename u-boot-pad.bin to u-boot-with-spl.bin > spl: introduce CONFIG_SPL_TARGET > powerpc: change .fixup test to a GCC version test > powerpc/mpc85xx: fix TLB alignment > powerpc/mpc8xxx: move LAW code into arch/powerpc/cpu/mpc8xxx > spl/mpc85xx: move udelay to cpu code > spl: include resetvec and lib8xxx > spl/mpc85xx: rename cpu_init_nand.c to spl_minimal.c > powerpc/mpc85xx: consistently use COBJS-y > spl/powerpc: introduce CONFIG_SPL_INIT_MINIMAL > spl/85xx: new SPL support > powerpc/mpc85xx/p1_p2_rdb_pc: new SPL support > spl/nand: introduce CONFIG_SPL_NAND_DRIVERS, _BASE, and _ECC. > spl/nand: config symbol documentation > powerpc/mpc85xx/p1_p2_rdb_pc: convert from nand_spl to new spl > powerpc/mpc85xx/p1_p2_rdb_pc: clean up memory map > powerpc/mpc85xx/p2020rdb-pca: Use L2 SRAM for SPL boot > nand/fsl: add NAND_NO_SUBPAGE_WRITE to eLBC and IFC drivers > > Makefile | 22 ++- > README | 45 ++++- > arch/powerpc/config.mk | 5 + > arch/powerpc/cpu/mpc85xx/Makefile | 38 ++-- > arch/powerpc/cpu/mpc85xx/cpu.c | 3 +- > arch/powerpc/cpu/mpc85xx/cpu_init.c | 2 +- > .../cpu/mpc85xx/{cpu_init_nand.c => spl_minimal.c} | 19 +- > arch/powerpc/cpu/mpc85xx/start.S | 123 ++++++------- > arch/powerpc/cpu/mpc85xx/tlb.c | 4 +- > arch/powerpc/cpu/mpc85xx/u-boot-spl.lds | 87 +++++++++ > arch/powerpc/cpu/mpc8xxx/Makefile | 17 ++ > .../fsl_law.c => arch/powerpc/cpu/mpc8xxx/law.c | 11 +- > arch/powerpc/lib/Makefile | 23 ++- > board/freescale/p1_p2_rdb_pc/Makefile | 16 ++ > board/freescale/p1_p2_rdb_pc/ddr.c | 2 + > board/freescale/p1_p2_rdb_pc/law.c | 2 +- > board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c | 2 +- > .../freescale/p1_p2_rdb_pc/spl_minimal.c | 10 +- > board/freescale/p1_p2_rdb_pc/tlb.c | 22 ++- > common/cmd_nand.c | 22 +++ > doc/README.mpc85xx | 2 +- > doc/README.nand | 21 +++ > drivers/misc/Makefile | 1 - > drivers/mtd/nand/Makefile | 34 +++- > drivers/mtd/nand/fsl_elbc_nand.c | 2 +- > drivers/mtd/nand/fsl_elbc_spl.c | 168 +++++++++++++++++ > drivers/mtd/nand/fsl_ifc_nand.c | 64 ++++++- > drivers/mtd/nand/nand_base.c | 9 +- > drivers/mtd/nand/nand_util.c | 188 ++++++++++++++++---- > drivers/serial/ns16550.c | 3 + > drivers/serial/serial_ns16550.c | 4 + > include/configs/am3517_crane.h | 3 + > include/configs/am3517_evm.h | 3 + > include/configs/cam_enc_4xx.h | 3 + > include/configs/da850evm.h | 3 + > include/configs/devkit8000.h | 3 + > include/configs/hawkboard.h | 3 + > include/configs/igep00x0.h | 3 + > include/configs/mcx.h | 3 + > include/configs/omap3_beagle.h | 3 + > include/configs/omap3_evm.h | 3 + > include/configs/omap3_evm_quick_nand.h | 3 + > include/configs/omap3_overo.h | 3 + > include/configs/p1_p2_rdb_pc.h | 137 +++++++------- > include/configs/tam3517-common.h | 3 + > include/configs/tricorder.h | 3 + > include/linux/mtd/nand.h | 7 +- > include/nand.h | 1 + > nand_spl/board/freescale/common.c | 40 ----- > nand_spl/board/freescale/mpc8536ds/Makefile | 10 +- > nand_spl/board/freescale/mpc8569mds/Makefile | 10 +- > nand_spl/board/freescale/mpc8572ds/Makefile | 10 +- > nand_spl/board/freescale/p1010rdb/Makefile | 16 +- > nand_spl/board/freescale/p1023rds/Makefile | 16 +- > nand_spl/board/freescale/p1_p2_rdb/Makefile | 10 +- > nand_spl/board/freescale/p1_p2_rdb_pc/Makefile | 146 --------------- > spl/Makefile | 21 +++ > 57 files changed, 980 insertions(+), 457 deletions(-) > rename arch/powerpc/cpu/mpc85xx/{cpu_init_nand.c => spl_minimal.c} (76%) > create mode 100644 arch/powerpc/cpu/mpc85xx/u-boot-spl.lds > rename drivers/misc/fsl_law.c => arch/powerpc/cpu/mpc8xxx/law.c (95%) > rename nand_spl/board/freescale/p1_p2_rdb_pc/nand_boot.c => board/freescale/p1_p2_rdb_pc/spl_minimal.c (94%) > create mode 100644 drivers/mtd/nand/fsl_elbc_spl.c > delete mode 100644 nand_spl/board/freescale/common.c > delete mode 100644 nand_spl/board/freescale/p1_p2_rdb_pc/Makefile Applied to u-boot/master, thanks!
The following changes since commit 178d0cc1a4c73c3341afbeb2a93b172de8c96bd1: Merge branch 'master' of git://git.denx.de/u-boot-video (2012-11-19 09:28:04 -0700) are available in the git repository at: git://git.denx.de/u-boot-nand-flash.git master for you to fetch changes up to 3287f6d3858faee768a7c47515bd21914ad591a2: nand: Add torture feature (2012-11-26 15:41:29 -0600) ---------------------------------------------------------------- Benoît Thébaudeau (3): nand: Clean up nand_util nand: Fix nand_erase_opts() offset check nand: Add torture feature Joe Hershberger (1): nand: Move the sub-page read support enable to a flag José Miguel Gonçalves (1): Add u-boot-pad.bin target to the Makefile Karl O. Pinc (1): README: Reference nand monitor commands in U-Boot README Prabhakar Kushwaha (1): driver/mtd:IFC NAND:Initialise internal SRAM before any write Scott Wood (22): serial/ns16550: don't build serial_ns16550 with MIN_FUNCTIONS serial/ns16550: wait for TEMT before initializing powerpc/mpc85xx: move debug tlb entry after TLB is in known state powerpc/mpc85xx: add comma before "already enabled" spl: rename u-boot-pad.bin to u-boot-with-spl.bin spl: introduce CONFIG_SPL_TARGET powerpc: change .fixup test to a GCC version test powerpc/mpc85xx: fix TLB alignment powerpc/mpc8xxx: move LAW code into arch/powerpc/cpu/mpc8xxx spl/mpc85xx: move udelay to cpu code spl: include resetvec and lib8xxx spl/mpc85xx: rename cpu_init_nand.c to spl_minimal.c powerpc/mpc85xx: consistently use COBJS-y spl/powerpc: introduce CONFIG_SPL_INIT_MINIMAL spl/85xx: new SPL support powerpc/mpc85xx/p1_p2_rdb_pc: new SPL support spl/nand: introduce CONFIG_SPL_NAND_DRIVERS, _BASE, and _ECC. spl/nand: config symbol documentation powerpc/mpc85xx/p1_p2_rdb_pc: convert from nand_spl to new spl powerpc/mpc85xx/p1_p2_rdb_pc: clean up memory map powerpc/mpc85xx/p2020rdb-pca: Use L2 SRAM for SPL boot nand/fsl: add NAND_NO_SUBPAGE_WRITE to eLBC and IFC drivers Makefile | 22 ++- README | 45 ++++- arch/powerpc/config.mk | 5 + arch/powerpc/cpu/mpc85xx/Makefile | 38 ++-- arch/powerpc/cpu/mpc85xx/cpu.c | 3 +- arch/powerpc/cpu/mpc85xx/cpu_init.c | 2 +- .../cpu/mpc85xx/{cpu_init_nand.c => spl_minimal.c} | 19 +- arch/powerpc/cpu/mpc85xx/start.S | 123 ++++++------- arch/powerpc/cpu/mpc85xx/tlb.c | 4 +- arch/powerpc/cpu/mpc85xx/u-boot-spl.lds | 87 +++++++++ arch/powerpc/cpu/mpc8xxx/Makefile | 17 ++ .../fsl_law.c => arch/powerpc/cpu/mpc8xxx/law.c | 11 +- arch/powerpc/lib/Makefile | 23 ++- board/freescale/p1_p2_rdb_pc/Makefile | 16 ++ board/freescale/p1_p2_rdb_pc/ddr.c | 2 + board/freescale/p1_p2_rdb_pc/law.c | 2 +- board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c | 2 +- .../freescale/p1_p2_rdb_pc/spl_minimal.c | 10 +- board/freescale/p1_p2_rdb_pc/tlb.c | 22 ++- common/cmd_nand.c | 22 +++ doc/README.mpc85xx | 2 +- doc/README.nand | 21 +++ drivers/misc/Makefile | 1 - drivers/mtd/nand/Makefile | 34 +++- drivers/mtd/nand/fsl_elbc_nand.c | 2 +- drivers/mtd/nand/fsl_elbc_spl.c | 168 +++++++++++++++++ drivers/mtd/nand/fsl_ifc_nand.c | 64 ++++++- drivers/mtd/nand/nand_base.c | 9 +- drivers/mtd/nand/nand_util.c | 188 ++++++++++++++++---- drivers/serial/ns16550.c | 3 + drivers/serial/serial_ns16550.c | 4 + include/configs/am3517_crane.h | 3 + include/configs/am3517_evm.h | 3 + include/configs/cam_enc_4xx.h | 3 + include/configs/da850evm.h | 3 + include/configs/devkit8000.h | 3 + include/configs/hawkboard.h | 3 + include/configs/igep00x0.h | 3 + include/configs/mcx.h | 3 + include/configs/omap3_beagle.h | 3 + include/configs/omap3_evm.h | 3 + include/configs/omap3_evm_quick_nand.h | 3 + include/configs/omap3_overo.h | 3 + include/configs/p1_p2_rdb_pc.h | 137 +++++++------- include/configs/tam3517-common.h | 3 + include/configs/tricorder.h | 3 + include/linux/mtd/nand.h | 7 +- include/nand.h | 1 + nand_spl/board/freescale/common.c | 40 ----- nand_spl/board/freescale/mpc8536ds/Makefile | 10 +- nand_spl/board/freescale/mpc8569mds/Makefile | 10 +- nand_spl/board/freescale/mpc8572ds/Makefile | 10 +- nand_spl/board/freescale/p1010rdb/Makefile | 16 +- nand_spl/board/freescale/p1023rds/Makefile | 16 +- nand_spl/board/freescale/p1_p2_rdb/Makefile | 10 +- nand_spl/board/freescale/p1_p2_rdb_pc/Makefile | 146 --------------- spl/Makefile | 21 +++ 57 files changed, 980 insertions(+), 457 deletions(-) rename arch/powerpc/cpu/mpc85xx/{cpu_init_nand.c => spl_minimal.c} (76%) create mode 100644 arch/powerpc/cpu/mpc85xx/u-boot-spl.lds rename drivers/misc/fsl_law.c => arch/powerpc/cpu/mpc8xxx/law.c (95%) rename nand_spl/board/freescale/p1_p2_rdb_pc/nand_boot.c => board/freescale/p1_p2_rdb_pc/spl_minimal.c (94%) create mode 100644 drivers/mtd/nand/fsl_elbc_spl.c delete mode 100644 nand_spl/board/freescale/common.c delete mode 100644 nand_spl/board/freescale/p1_p2_rdb_pc/Makefile