@@ -48,7 +48,7 @@
#define SMSC95XX_INTERNAL_PHY_ID (1)
#define SMSC95XX_TX_OVERHEAD (8)
#define SMSC95XX_TX_OVERHEAD_CSUM (12)
-#define SUPPORTED_WAKE (WAKE_UCAST | WAKE_BCAST | \
+#define SUPPORTED_WAKE (WAKE_PHY | WAKE_UCAST | WAKE_BCAST | \
WAKE_MCAST | WAKE_ARP | WAKE_MAGIC)
#define FEATURE_8_WAKEUP_FILTERS (0x01)
@@ -176,14 +176,15 @@ static int smsc95xx_clear_feature(struct usbnet *dev, u32 feature)
/* Loop until the read is completed with timeout
* called with phy_mutex held */
-static int __must_check smsc95xx_phy_wait_not_busy(struct usbnet *dev)
+static int __must_check __smsc95xx_phy_wait_not_busy(struct usbnet *dev,
+ int in_pm)
{
unsigned long start_time = jiffies;
u32 val;
int ret;
do {
- ret = smsc95xx_read_reg(dev, MII_ADDR, &val);
+ ret = __smsc95xx_read_reg(dev, MII_ADDR, &val, in_pm);
check_warn_return(ret, "Error reading MII_ACCESS");
if (!(val & MII_BUSY_))
return 0;
@@ -192,7 +193,8 @@ static int __must_check smsc95xx_phy_wait_not_busy(struct usbnet *dev)
return -EIO;
}
-static int smsc95xx_mdio_read(struct net_device *netdev, int phy_id, int idx)
+static int __smsc95xx_mdio_read(struct net_device *netdev, int phy_id, int idx,
+ int in_pm)
{
struct usbnet *dev = netdev_priv(netdev);
u32 val, addr;
@@ -201,20 +203,20 @@ static int smsc95xx_mdio_read(struct net_device *netdev, int phy_id, int idx)
mutex_lock(&dev->phy_mutex);
/* confirm MII not busy */
- ret = smsc95xx_phy_wait_not_busy(dev);
+ ret = __smsc95xx_phy_wait_not_busy(dev, in_pm);
check_warn_goto_done(ret, "MII is busy in smsc95xx_mdio_read");
/* set the address, index & direction (read from PHY) */
phy_id &= dev->mii.phy_id_mask;
idx &= dev->mii.reg_num_mask;
addr = (phy_id << 11) | (idx << 6) | MII_READ_ | MII_BUSY_;
- ret = smsc95xx_write_reg(dev, MII_ADDR, addr);
+ ret = __smsc95xx_write_reg(dev, MII_ADDR, addr, in_pm);
check_warn_goto_done(ret, "Error writing MII_ADDR");
- ret = smsc95xx_phy_wait_not_busy(dev);
+ ret = __smsc95xx_phy_wait_not_busy(dev, in_pm);
check_warn_goto_done(ret, "Timed out reading MII reg %02X", idx);
- ret = smsc95xx_read_reg(dev, MII_DATA, &val);
+ ret = __smsc95xx_read_reg(dev, MII_DATA, &val, in_pm);
check_warn_goto_done(ret, "Error reading MII_DATA");
ret = (u16)(val & 0xFFFF);
@@ -224,8 +226,8 @@ done:
return ret;
}
-static void smsc95xx_mdio_write(struct net_device *netdev, int phy_id, int idx,
- int regval)
+static void __smsc95xx_mdio_write(struct net_device *netdev, int phy_id,
+ int idx, int regval, int in_pm)
{
struct usbnet *dev = netdev_priv(netdev);
u32 val, addr;
@@ -234,27 +236,50 @@ static void smsc95xx_mdio_write(struct net_device *netdev, int phy_id, int idx,
mutex_lock(&dev->phy_mutex);
/* confirm MII not busy */
- ret = smsc95xx_phy_wait_not_busy(dev);
+ ret = __smsc95xx_phy_wait_not_busy(dev, in_pm);
check_warn_goto_done(ret, "MII is busy in smsc95xx_mdio_write");
val = regval;
- ret = smsc95xx_write_reg(dev, MII_DATA, val);
+ ret = __smsc95xx_write_reg(dev, MII_DATA, val, in_pm);
check_warn_goto_done(ret, "Error writing MII_DATA");
/* set the address, index & direction (write to PHY) */
phy_id &= dev->mii.phy_id_mask;
idx &= dev->mii.reg_num_mask;
addr = (phy_id << 11) | (idx << 6) | MII_WRITE_ | MII_BUSY_;
- ret = smsc95xx_write_reg(dev, MII_ADDR, addr);
+ ret = __smsc95xx_write_reg(dev, MII_ADDR, addr, in_pm);
check_warn_goto_done(ret, "Error writing MII_ADDR");
- ret = smsc95xx_phy_wait_not_busy(dev);
+ ret = __smsc95xx_phy_wait_not_busy(dev, in_pm);
check_warn_goto_done(ret, "Timed out writing MII reg %02X", idx);
done:
mutex_unlock(&dev->phy_mutex);
}
+static int smsc95xx_mdio_read_nopm(struct net_device *netdev, int phy_id,
+ int idx)
+{
+ return __smsc95xx_mdio_read(netdev, phy_id, idx, 1);
+}
+
+static void smsc95xx_mdio_write_nopm(struct net_device *netdev, int phy_id,
+ int idx, int regval)
+{
+ __smsc95xx_mdio_write(netdev, phy_id, idx, regval, 1);
+}
+
+static int smsc95xx_mdio_read(struct net_device *netdev, int phy_id, int idx)
+{
+ return __smsc95xx_mdio_read(netdev, phy_id, idx, 0);
+}
+
+static void smsc95xx_mdio_write(struct net_device *netdev, int phy_id, int idx,
+ int regval)
+{
+ __smsc95xx_mdio_write(netdev, phy_id, idx, regval, 0);
+}
+
static int __must_check smsc95xx_wait_eeprom(struct usbnet *dev)
{
unsigned long start_time = jiffies;
@@ -1068,18 +1093,61 @@ static u16 smsc_crc(const u8 *buffer, size_t len, int filter)
return bitrev16(crc16(0xFFFF, buffer, len)) << ((filter % 2) * 16);
}
+static int smsc95xx_enable_phy_wakeup_interrupts(struct usbnet *dev, u16 mask)
+{
+ struct mii_if_info *mii = &dev->mii;
+ int ret;
+
+ netdev_dbg(dev->net, "enabling PHY wakeup interrupts");
+
+ /* read to clear */
+ ret = smsc95xx_mdio_read_nopm(dev->net, mii->phy_id, PHY_INT_SRC);
+ check_warn_return(ret, "Error reading PHY_INT_SRC");
+
+ /* enable interrupt source */
+ ret = smsc95xx_mdio_read_nopm(dev->net, mii->phy_id, PHY_INT_MASK);
+ check_warn_return(ret, "Error reading PHY_INT_MASK");
+
+ ret |= mask;
+
+ smsc95xx_mdio_write_nopm(dev->net, mii->phy_id, PHY_INT_MASK, ret);
+
+ return 0;
+}
+
+static int smsc95xx_link_ok_nopm(struct usbnet *dev)
+{
+ struct mii_if_info *mii = &dev->mii;
+ int ret;
+
+ /* first, a dummy read, needed to latch some MII phys */
+ ret = smsc95xx_mdio_read_nopm(dev->net, mii->phy_id, MII_BMSR);
+ check_warn_return(ret, "Error reading MII_BMSR");
+
+ ret = smsc95xx_mdio_read_nopm(dev->net, mii->phy_id, MII_BMSR);
+ check_warn_return(ret, "Error reading MII_BMSR");
+
+ return !!(ret & BMSR_LSTATUS);
+}
+
static int smsc95xx_suspend(struct usb_interface *intf, pm_message_t message)
{
struct usbnet *dev = usb_get_intfdata(intf);
struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
+ u32 val, link_up;
int ret;
- u32 val;
ret = usbnet_suspend(intf, message);
check_warn_return(ret, "usbnet_suspend error");
- /* if no wol options set, enter lowest power SUSPEND2 mode */
- if (!(pdata->wolopts & SUPPORTED_WAKE)) {
+ /* determine if link is up using only _nopm functions */
+ link_up = smsc95xx_link_ok_nopm(dev);
+
+ /* if no wol options set, or if link is down and we're not waking on
+ * PHY activity, enter lowest power SUSPEND2 mode
+ */
+ if (!(pdata->wolopts & SUPPORTED_WAKE) ||
+ !(link_up || (pdata->wolopts & WAKE_PHY))) {
netdev_info(dev->net, "entering SUSPEND2 mode");
/* disable energy detect (link up) & wake up events */
@@ -1112,6 +1180,59 @@ static int smsc95xx_suspend(struct usb_interface *intf, pm_message_t message)
return 0;
}
+ if (pdata->wolopts & WAKE_PHY) {
+ ret = smsc95xx_enable_phy_wakeup_interrupts(dev,
+ (PHY_INT_MASK_ANEG_COMP_ | PHY_INT_MASK_LINK_DOWN_));
+ check_warn_return(ret, "error enabling PHY wakeup ints");
+
+ /* if link is down then configure EDPD and enter SUSPEND1,
+ * otherwise enter SUSPEND0 below
+ */
+ if (!link_up) {
+ struct mii_if_info *mii = &dev->mii;
+ netdev_info(dev->net, "entering SUSPEND1 mode");
+
+ /* reconfigure link pulse detection timing for
+ * compatibility with non-standard link partners
+ */
+ if (pdata->features & FEATURE_PHY_NLP_CROSSOVER)
+ smsc95xx_mdio_write_nopm(dev->net, mii->phy_id,
+ PHY_EDPD_CONFIG,
+ PHY_EDPD_CONFIG_DEFAULT);
+
+ /* enable energy detect power-down mode */
+ ret = smsc95xx_mdio_read_nopm(dev->net, mii->phy_id,
+ PHY_MODE_CTRL_STS);
+ check_warn_return(ret, "Error reading PHY_MODE_CTRL_STS");
+
+ ret |= MODE_CTRL_STS_EDPWRDOWN_;
+
+ smsc95xx_mdio_write_nopm(dev->net, mii->phy_id,
+ PHY_MODE_CTRL_STS, ret);
+
+ /* enter SUSPEND1 mode */
+ ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val);
+ check_warn_return(ret, "Error reading PM_CTRL");
+
+ val &= ~(PM_CTL_SUS_MODE_ | PM_CTL_WUPS_ | PM_CTL_PHY_RST_);
+ val |= PM_CTL_SUS_MODE_1;
+
+ ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
+ check_warn_return(ret, "Error writing PM_CTRL");
+
+ /* clear wol status, enable energy detection */
+ val &= ~PM_CTL_WUPS_;
+ val |= (PM_CTL_WUPS_ED_ | PM_CTL_ED_EN_);
+
+ ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
+ check_warn_return(ret, "Error writing PM_CTRL");
+
+ smsc95xx_set_feature(dev, USB_DEVICE_REMOTE_WAKEUP);
+
+ return 0;
+ }
+ }
+
if (pdata->wolopts & (WAKE_BCAST | WAKE_MCAST | WAKE_ARP | WAKE_UCAST)) {
u32 *filter_mask = kzalloc(32, GFP_KERNEL);
u32 command[2];
@@ -1250,6 +1371,10 @@ static int smsc95xx_suspend(struct usb_interface *intf, pm_message_t message)
val |= PM_CTL_WOL_EN_;
+ /* phy energy detect wakeup source */
+ if (pdata->wolopts & WAKE_PHY)
+ val |= PM_CTL_ED_EN_;
+
ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
check_warn_return(ret, "Error writing PM_CTRL");
@@ -1271,6 +1396,11 @@ static int smsc95xx_suspend(struct usb_interface *intf, pm_message_t message)
/* clear wol status */
val &= ~PM_CTL_WUPS_;
val |= PM_CTL_WUPS_WOL_;
+
+ /* enable energy detection */
+ if (pdata->wolopts & WAKE_PHY)
+ val |= PM_CTL_WUPS_ED_;
+
ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
check_warn_return(ret, "Error writing PM_CTRL");
@@ -226,6 +226,23 @@
/* Vendor-specific PHY Definitions */
+/* EDPD NLP / crossover time configuration (LAN9500A only) */
+#define PHY_EDPD_CONFIG (16)
+#define PHY_EDPD_CONFIG_TX_NLP_EN_ ((u16)0x8000)
+#define PHY_EDPD_CONFIG_TX_NLP_1000_ ((u16)0x0000)
+#define PHY_EDPD_CONFIG_TX_NLP_768_ ((u16)0x2000)
+#define PHY_EDPD_CONFIG_TX_NLP_512_ ((u16)0x4000)
+#define PHY_EDPD_CONFIG_TX_NLP_256_ ((u16)0x6000)
+#define PHY_EDPD_CONFIG_RX_1_NLP_ ((u16)0x1000)
+#define PHY_EDPD_CONFIG_RX_NLP_64_ ((u16)0x0000)
+#define PHY_EDPD_CONFIG_RX_NLP_256_ ((u16)0x0400)
+#define PHY_EDPD_CONFIG_RX_NLP_512_ ((u16)0x0800)
+#define PHY_EDPD_CONFIG_RX_NLP_1000_ ((u16)0x0C00)
+#define PHY_EDPD_CONFIG_EXT_CROSSOVER_ ((u16)0x0001)
+#define PHY_EDPD_CONFIG_DEFAULT (PHY_EDPD_CONFIG_TX_NLP_EN_ | \
+ PHY_EDPD_CONFIG_TX_NLP_768_ | \
+ PHY_EDPD_CONFIG_RX_1_NLP_)
+
/* Mode Control/Status Register */
#define PHY_MODE_CTRL_STS (17)
#define MODE_CTRL_STS_EDPWRDOWN_ ((u16)0x2000)
This patch enables LAN9500 family devices to wake from suspend on either link up or link down events It also adds _nopm versions of mdio access functions, so we can safely call them from suspend and resume functions Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> --- drivers/net/usb/smsc95xx.c | 164 +++++++++++++++++++++++++++++++++++++++----- drivers/net/usb/smsc95xx.h | 17 +++++ 2 files changed, 164 insertions(+), 17 deletions(-)