diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index adc4754..31c9c5c 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -10,6 +10,15 @@
 		reg = <0x00000000 0x40000000>;
 	};
 
+	host1x {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+				nvidia,ddc-i2c-bus = <&lcd_ddc>;
+			};
+		};
+	};
+
 	pinmux {
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
@@ -341,7 +350,7 @@
 			#size-cells = <0>;
 		};
 
-		i2c@1 {
+		lcd_ddc: i2c@1 {
 			reg = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -516,6 +525,99 @@
 		bus-width = <8>;
 	};
 
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 16 32 48 64 80 96 112 128 144 160 176 192 208 224 240 255>;
+		default-brightness-level = <12>;
+
+		/* resources used by the power sequences */
+		pwms = <&pwm 2 5000000>;
+		pwm-names = "backlight";
+		power-supply = <&vdd_bl_reg>;
+		panel-supply = <&vdd_panel_reg>;
+
+		power-sequences {
+			power-on {
+				/*
+				 * Panel power and LVDS enable.
+				 * TODO: move into the panel device as soon as
+				 * panel framework supports power sequences.
+				 */
+				step0 {
+					type = "regulator";
+					id = "panel";
+					enable;
+				};
+				step1 {
+					type = "gpio";
+					gpio = <&gpio 10 0>;
+					value = <1>;
+				};
+				step2 {
+					type = "delay";
+					delay = <200000>;
+				};
+				/* Backlight sequence. This belongs here. */
+				step3 {
+					type = "regulator";
+					id = "power";
+					enable;
+				};
+				step4 {
+					type = "delay";
+					delay = <10000>;
+				};
+				step5 {
+					type = "pwm";
+					id = "backlight";
+					enable;
+				};
+				step6 {
+					type = "gpio";
+					gpio = <&gpio 28 0>;
+					value = <1>;
+				};
+			};
+
+			power-off {
+				step0 {
+					type = "gpio";
+					gpio = <&gpio 28 0>;
+					value = <0>;
+				};
+				step1 {
+					type = "pwm";
+					id = "backlight";
+					disable;
+				};
+				step2 {
+					type = "delay";
+					delay = <10000>;
+				};
+				step3 {
+					type = "regulator";
+					id = "power";
+					disable;
+				};
+				/* This also belongs to the panel sequence */
+				step4 {
+					type = "delay";
+					delay = <200000>;
+				};
+				step5 {
+					type = "gpio";
+					gpio = <&gpio 10 0>;
+					value = <0>;
+				};
+				step6 {
+					type = "regulator";
+					id = "panel";
+					disable;
+				};
+			};
+		};
+	};
+
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -549,7 +651,7 @@
 			enable-active-high;
 		};
 
-		regulator@3 {
+		vdd_panel_reg: regulator@3 {
 			compatible = "regulator-fixed";
 			reg = <3>;
 			regulator-name = "vdd_pnl";
@@ -559,7 +661,7 @@
 			enable-active-high;
 		};
 
-		regulator@4 {
+		vdd_bl_reg: regulator@4 {
 			compatible = "regulator-fixed";
 			reg = <4>;
 			regulator-name = "vdd_bl";