Message ID | 1605362053.1460917.1353066169872.JavaMail.root@advansee.com |
---|---|
State | Awaiting Upstream |
Delegated to: | Stefano Babic |
Headers | show |
On 16/11/2012 12:42, Benoît Thébaudeau wrote: > The correct bit for H1_PM is 16, not 8, which is the DP pull-up impedance > selection bit. > > This issue has been reported by Michael Burkey <mdburkey@gmail.com> and fixed by > Christoph Fritz <chf.fritz@googlemail.com> on Linux, from which these #define-s > had been copied. > > Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> > Cc: Stefano Babic <sbabic@denx.de> > Cc: Marek Vasut <marex@denx.de> Hi Benoit, > --- > .../drivers/usb/host/ehci-mxc.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git u-boot-imx-f22e4fa.orig/drivers/usb/host/ehci-mxc.c u-boot-imx-f22e4fa/drivers/usb/host/ehci-mxc.c > index 7c5f71c..f2642a0 100644 > --- u-boot-imx-f22e4fa.orig/drivers/usb/host/ehci-mxc.c > +++ u-boot-imx-f22e4fa/drivers/usb/host/ehci-mxc.c > @@ -67,7 +67,7 @@ > #define MX35_H1_SIC_SHIFT 21 > #define MX35_H1_SIC_MASK (0x3 << MX35_H1_SIC_SHIFT) > #define MX35_H1_PP_BIT (1 << 18) > -#define MX35_H1_PM_BIT (1 << 8) > +#define MX35_H1_PM_BIT (1 << 16) > #define MX35_H1_IPPUE_UP_BIT (1 << 7) > #define MX35_H1_IPPUE_DOWN_BIT (1 << 6) > #define MX35_H1_TLL_BIT (1 << 5) Hey, the patch was sent today to linux-arm ! Very nice you noted and route the bug to u-boot. Acked-by: Stefano Babic <sbabic@denx.de> Best regards, Stefano Babic
On 16/11/2012 12:42, Benoît Thébaudeau wrote: > The correct bit for H1_PM is 16, not 8, which is the DP pull-up impedance > selection bit. > > This issue has been reported by Michael Burkey <mdburkey@gmail.com> and fixed by > Christoph Fritz <chf.fritz@googlemail.com> on Linux, from which these #define-s > had been copied. > > Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> > Cc: Stefano Babic <sbabic@denx.de> > Cc: Marek Vasut <marex@denx.de> > --- > .../drivers/usb/host/ehci-mxc.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git u-boot-imx-f22e4fa.orig/drivers/usb/host/ehci-mxc.c u-boot-imx-f22e4fa/drivers/usb/host/ehci-mxc.c > index 7c5f71c..f2642a0 100644 > --- u-boot-imx-f22e4fa.orig/drivers/usb/host/ehci-mxc.c > +++ u-boot-imx-f22e4fa/drivers/usb/host/ehci-mxc.c > @@ -67,7 +67,7 @@ > #define MX35_H1_SIC_SHIFT 21 > #define MX35_H1_SIC_MASK (0x3 << MX35_H1_SIC_SHIFT) > #define MX35_H1_PP_BIT (1 << 18) > -#define MX35_H1_PM_BIT (1 << 8) > +#define MX35_H1_PM_BIT (1 << 16) > #define MX35_H1_IPPUE_UP_BIT (1 << 7) > #define MX35_H1_IPPUE_DOWN_BIT (1 << 6) > #define MX35_H1_TLL_BIT (1 << 5) > Applied to u-boot-imx, thanks. Best regards, Stefano Babic
diff --git u-boot-imx-f22e4fa.orig/drivers/usb/host/ehci-mxc.c u-boot-imx-f22e4fa/drivers/usb/host/ehci-mxc.c index 7c5f71c..f2642a0 100644 --- u-boot-imx-f22e4fa.orig/drivers/usb/host/ehci-mxc.c +++ u-boot-imx-f22e4fa/drivers/usb/host/ehci-mxc.c @@ -67,7 +67,7 @@ #define MX35_H1_SIC_SHIFT 21 #define MX35_H1_SIC_MASK (0x3 << MX35_H1_SIC_SHIFT) #define MX35_H1_PP_BIT (1 << 18) -#define MX35_H1_PM_BIT (1 << 8) +#define MX35_H1_PM_BIT (1 << 16) #define MX35_H1_IPPUE_UP_BIT (1 << 7) #define MX35_H1_IPPUE_DOWN_BIT (1 << 6) #define MX35_H1_TLL_BIT (1 << 5)
The correct bit for H1_PM is 16, not 8, which is the DP pull-up impedance selection bit. This issue has been reported by Michael Burkey <mdburkey@gmail.com> and fixed by Christoph Fritz <chf.fritz@googlemail.com> on Linux, from which these #define-s had been copied. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Marek Vasut <marex@denx.de> --- .../drivers/usb/host/ehci-mxc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)