From patchwork Thu Nov 15 17:11:24 2012 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Naresh Kumar Inna X-Patchwork-Id: 199260 X-Patchwork-Delegate: davem@davemloft.net Return-Path: X-Original-To: patchwork-incoming@ozlabs.org Delivered-To: patchwork-incoming@ozlabs.org Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id E5FE92C035C for ; Thu, 15 Nov 2012 22:37:04 +1100 (EST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1767662Ab2KOLg7 (ORCPT ); Thu, 15 Nov 2012 06:36:59 -0500 Received: from stargate.chelsio.com ([67.207.112.58]:26214 "EHLO stargate.chelsio.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1767653Ab2KOLgp (ORCPT ); Thu, 15 Nov 2012 06:36:45 -0500 Received: from maui.asicdesigners.com (maui.asicdesigners.com [10.192.180.15]) by stargate.chelsio.com (8.13.1/8.13.1) with SMTP id qAFBahLK022484; Thu, 15 Nov 2012 03:36:43 -0800 Received: from fcoe-test9.asicdesigners.com ([10.193.185.176]) by maui.asicdesigners.com with Microsoft SMTPSVC(6.0.3790.4675); Thu, 15 Nov 2012 03:36:41 -0800 From: Naresh Kumar Inna To: JBottomley@parallels.com, linux-scsi@vger.kernel.org, dm@chelsio.com, leedom@chelsio.com Cc: netdev@vger.kernel.org, naresh@chelsio.com, chethan@chelsio.com Subject: [v6 PATCH 8/8] csiostor: Chelsio FCoE offload driver submission (sources part 5). Date: Thu, 15 Nov 2012 22:41:24 +0530 Message-Id: <1352999484-17812-9-git-send-email-naresh@chelsio.com> X-Mailer: git-send-email 1.7.1 In-Reply-To: <1352999484-17812-1-git-send-email-naresh@chelsio.com> References: <1352999484-17812-1-git-send-email-naresh@chelsio.com> X-OriginalArrivalTime: 15 Nov 2012 11:36:42.0184 (UTC) FILETIME=[7BCCD480:01CDC325] Sender: netdev-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org This patch contains the hardware interfacing functionality (chip/firmware initialization/setup) and error handling. It also has slow path event handling functionality, the Makefile and Kconfig changes. Signed-off-by: Naresh Kumar Inna --- V3: Added const qualifier to adapter descriptor table. V5: Re-wrote error paths to reduce lock/unlock ambiguity. drivers/scsi/Kconfig | 1 + drivers/scsi/Makefile | 1 + drivers/scsi/csiostor/Kconfig | 19 + drivers/scsi/csiostor/Makefile | 11 + drivers/scsi/csiostor/csio_hw.c | 4395 +++++++++++++++++++++++++++++++++++++++ 5 files changed, 4427 insertions(+), 0 deletions(-) create mode 100644 drivers/scsi/csiostor/Kconfig create mode 100644 drivers/scsi/csiostor/Makefile create mode 100644 drivers/scsi/csiostor/csio_hw.c diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 74bf1aa..af7a3e7 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -1812,6 +1812,7 @@ config SCSI_VIRTIO This is the virtual HBA driver for virtio. If the kernel will be used in a virtual machine, say Y or M. +source "drivers/scsi/csiostor/Kconfig" endif # SCSI_LOWLEVEL diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 888f73a..8739aa7 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -90,6 +90,7 @@ obj-$(CONFIG_SCSI_QLA_FC) += qla2xxx/ obj-$(CONFIG_SCSI_QLA_ISCSI) += libiscsi.o qla4xxx/ obj-$(CONFIG_SCSI_LPFC) += lpfc/ obj-$(CONFIG_SCSI_BFA_FC) += bfa/ +obj-$(CONFIG_SCSI_CHELSIO_FCOE) += csiostor/ obj-$(CONFIG_SCSI_PAS16) += pas16.o obj-$(CONFIG_SCSI_T128) += t128.o obj-$(CONFIG_SCSI_DMX3191D) += dmx3191d.o diff --git a/drivers/scsi/csiostor/Kconfig b/drivers/scsi/csiostor/Kconfig new file mode 100644 index 0000000..4d03b03 --- /dev/null +++ b/drivers/scsi/csiostor/Kconfig @@ -0,0 +1,19 @@ +config SCSI_CHELSIO_FCOE + tristate "Chelsio Communications FCoE support" + depends on PCI && SCSI + select SCSI_FC_ATTRS + select FW_LOADER + help + This driver supports FCoE Offload functionality over + Chelsio T4-based 10Gb Converged Network Adapters. + + For general information about Chelsio and our products, visit + our website at . + + For customer support, please visit our customer support page at + . + + Please send feedback to . + + To compile this driver as a module choose M here; the module + will be called csiostor. diff --git a/drivers/scsi/csiostor/Makefile b/drivers/scsi/csiostor/Makefile new file mode 100644 index 0000000..b581966 --- /dev/null +++ b/drivers/scsi/csiostor/Makefile @@ -0,0 +1,11 @@ +# +## Chelsio FCoE driver +# +## + +ccflags-y += -I$(srctree)/drivers/net/ethernet/chelsio/cxgb4 + +obj-$(CONFIG_SCSI_CHELSIO_FCOE) += csiostor.o + +csiostor-objs := csio_attr.o csio_init.o csio_lnode.o csio_scsi.o \ + csio_hw.o csio_isr.o csio_mb.o csio_rnode.o csio_wr.o diff --git a/drivers/scsi/csiostor/csio_hw.c b/drivers/scsi/csiostor/csio_hw.c new file mode 100644 index 0000000..963c6c1 --- /dev/null +++ b/drivers/scsi/csiostor/csio_hw.c @@ -0,0 +1,4395 @@ +/* + * This file is part of the Chelsio FCoE driver for Linux. + * + * Copyright (c) 2008-2012 Chelsio Communications, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "csio_hw.h" +#include "csio_lnode.h" +#include "csio_rnode.h" + +int csio_force_master; +int csio_dbg_level = 0xFEFF; +unsigned int csio_port_mask = 0xf; + +/* Default FW event queue entries. */ +static uint32_t csio_evtq_sz = CSIO_EVTQ_SIZE; + +/* Default MSI param level */ +int csio_msi = 2; + +/* FCoE function instances */ +static int dev_num; + +/* FCoE Adapter types & its description */ +static const struct csio_adap_desc csio_fcoe_adapters[] = { + {"T440-Dbg 10G", "Chelsio T440-Dbg 10G [FCoE]"}, + {"T420-CR 10G", "Chelsio T420-CR 10G [FCoE]"}, + {"T422-CR 10G/1G", "Chelsio T422-CR 10G/1G [FCoE]"}, + {"T440-CR 10G", "Chelsio T440-CR 10G [FCoE]"}, + {"T420-BCH 10G", "Chelsio T420-BCH 10G [FCoE]"}, + {"T440-BCH 10G", "Chelsio T440-BCH 10G [FCoE]"}, + {"T440-CH 10G", "Chelsio T440-CH 10G [FCoE]"}, + {"T420-SO 10G", "Chelsio T420-SO 10G [FCoE]"}, + {"T420-CX4 10G", "Chelsio T420-CX4 10G [FCoE]"}, + {"T420-BT 10G", "Chelsio T420-BT 10G [FCoE]"}, + {"T404-BT 1G", "Chelsio T404-BT 1G [FCoE]"}, + {"B420-SR 10G", "Chelsio B420-SR 10G [FCoE]"}, + {"B404-BT 1G", "Chelsio B404-BT 1G [FCoE]"}, + {"T480-CR 10G", "Chelsio T480-CR 10G [FCoE]"}, + {"T440-LP-CR 10G", "Chelsio T440-LP-CR 10G [FCoE]"}, + {"T4 FPGA", "Chelsio T4 FPGA [FCoE]"} +}; + +static void csio_mgmtm_cleanup(struct csio_mgmtm *); +static void csio_hw_mbm_cleanup(struct csio_hw *); + +/* State machine forward declarations */ +static void csio_hws_uninit(struct csio_hw *, enum csio_hw_ev); +static void csio_hws_configuring(struct csio_hw *, enum csio_hw_ev); +static void csio_hws_initializing(struct csio_hw *, enum csio_hw_ev); +static void csio_hws_ready(struct csio_hw *, enum csio_hw_ev); +static void csio_hws_quiescing(struct csio_hw *, enum csio_hw_ev); +static void csio_hws_quiesced(struct csio_hw *, enum csio_hw_ev); +static void csio_hws_resetting(struct csio_hw *, enum csio_hw_ev); +static void csio_hws_removing(struct csio_hw *, enum csio_hw_ev); +static void csio_hws_pcierr(struct csio_hw *, enum csio_hw_ev); + +static void csio_hw_initialize(struct csio_hw *hw); +static void csio_evtq_stop(struct csio_hw *hw); +static void csio_evtq_start(struct csio_hw *hw); + +int csio_is_hw_ready(struct csio_hw *hw) +{ + return csio_match_state(hw, csio_hws_ready); +} + +int csio_is_hw_removing(struct csio_hw *hw) +{ + return csio_match_state(hw, csio_hws_removing); +} + + +/* + * csio_hw_wait_op_done_val - wait until an operation is completed + * @hw: the HW module + * @reg: the register to check for completion + * @mask: a single-bit field within @reg that indicates completion + * @polarity: the value of the field when the operation is completed + * @attempts: number of check iterations + * @delay: delay in usecs between iterations + * @valp: where to store the value of the register at completion time + * + * Wait until an operation is completed by checking a bit in a register + * up to @attempts times. If @valp is not NULL the value of the register + * at the time it indicated completion is stored there. Returns 0 if the + * operation completes and -EAGAIN otherwise. + */ +static int +csio_hw_wait_op_done_val(struct csio_hw *hw, int reg, uint32_t mask, + int polarity, int attempts, int delay, uint32_t *valp) +{ + uint32_t val; + while (1) { + val = csio_rd_reg32(hw, reg); + + if (!!(val & mask) == polarity) { + if (valp) + *valp = val; + return 0; + } + + if (--attempts == 0) + return -EAGAIN; + if (delay) + udelay(delay); + } +} + +void +csio_set_reg_field(struct csio_hw *hw, uint32_t reg, uint32_t mask, + uint32_t value) +{ + uint32_t val = csio_rd_reg32(hw, reg) & ~mask; + + csio_wr_reg32(hw, val | value, reg); + /* Flush */ + csio_rd_reg32(hw, reg); + +} + +/* + * csio_hw_mc_read - read from MC through backdoor accesses + * @hw: the hw module + * @addr: address of first byte requested + * @data: 64 bytes of data containing the requested address + * @ecc: where to store the corresponding 64-bit ECC word + * + * Read 64 bytes of data from MC starting at a 64-byte-aligned address + * that covers the requested address @addr. If @parity is not %NULL it + * is assigned the 64-bit ECC word for the read data. + */ +int +csio_hw_mc_read(struct csio_hw *hw, uint32_t addr, uint32_t *data, + uint64_t *ecc) +{ + int i; + + if (csio_rd_reg32(hw, MC_BIST_CMD) & START_BIST) + return -EBUSY; + csio_wr_reg32(hw, addr & ~0x3fU, MC_BIST_CMD_ADDR); + csio_wr_reg32(hw, 64, MC_BIST_CMD_LEN); + csio_wr_reg32(hw, 0xc, MC_BIST_DATA_PATTERN); + csio_wr_reg32(hw, BIST_OPCODE(1) | START_BIST | BIST_CMD_GAP(1), + MC_BIST_CMD); + i = csio_hw_wait_op_done_val(hw, MC_BIST_CMD, START_BIST, + 0, 10, 1, NULL); + if (i) + return i; + +#define MC_DATA(i) MC_BIST_STATUS_REG(MC_BIST_STATUS_RDATA, i) + + for (i = 15; i >= 0; i--) + *data++ = htonl(csio_rd_reg32(hw, MC_DATA(i))); + if (ecc) + *ecc = csio_rd_reg64(hw, MC_DATA(16)); +#undef MC_DATA + return 0; +} + +/* + * csio_hw_edc_read - read from EDC through backdoor accesses + * @hw: the hw module + * @idx: which EDC to access + * @addr: address of first byte requested + * @data: 64 bytes of data containing the requested address + * @ecc: where to store the corresponding 64-bit ECC word + * + * Read 64 bytes of data from EDC starting at a 64-byte-aligned address + * that covers the requested address @addr. If @parity is not %NULL it + * is assigned the 64-bit ECC word for the read data. + */ +int +csio_hw_edc_read(struct csio_hw *hw, int idx, uint32_t addr, uint32_t *data, + uint64_t *ecc) +{ + int i; + + idx *= EDC_STRIDE; + if (csio_rd_reg32(hw, EDC_BIST_CMD + idx) & START_BIST) + return -EBUSY; + csio_wr_reg32(hw, addr & ~0x3fU, EDC_BIST_CMD_ADDR + idx); + csio_wr_reg32(hw, 64, EDC_BIST_CMD_LEN + idx); + csio_wr_reg32(hw, 0xc, EDC_BIST_DATA_PATTERN + idx); + csio_wr_reg32(hw, BIST_OPCODE(1) | BIST_CMD_GAP(1) | START_BIST, + EDC_BIST_CMD + idx); + i = csio_hw_wait_op_done_val(hw, EDC_BIST_CMD + idx, START_BIST, + 0, 10, 1, NULL); + if (i) + return i; + +#define EDC_DATA(i) (EDC_BIST_STATUS_REG(EDC_BIST_STATUS_RDATA, i) + idx) + + for (i = 15; i >= 0; i--) + *data++ = htonl(csio_rd_reg32(hw, EDC_DATA(i))); + if (ecc) + *ecc = csio_rd_reg64(hw, EDC_DATA(16)); +#undef EDC_DATA + return 0; +} + +/* + * csio_mem_win_rw - read/write memory through PCIE memory window + * @hw: the adapter + * @addr: address of first byte requested + * @data: MEMWIN0_APERTURE bytes of data containing the requested address + * @dir: direction of transfer 1 => read, 0 => write + * + * Read/write MEMWIN0_APERTURE bytes of data from MC starting at a + * MEMWIN0_APERTURE-byte-aligned address that covers the requested + * address @addr. + */ +static int +csio_mem_win_rw(struct csio_hw *hw, u32 addr, __be32 *data, int dir) +{ + int i; + + /* + * Setup offset into PCIE memory window. Address must be a + * MEMWIN0_APERTURE-byte-aligned address. (Read back MA register to + * ensure that changes propagate before we attempt to use the new + * values.) + */ + csio_wr_reg32(hw, addr & ~(MEMWIN0_APERTURE - 1), + PCIE_MEM_ACCESS_OFFSET); + csio_rd_reg32(hw, PCIE_MEM_ACCESS_OFFSET); + + /* Collecting data 4 bytes at a time upto MEMWIN0_APERTURE */ + for (i = 0; i < MEMWIN0_APERTURE; i = i + sizeof(__be32)) { + if (dir) + *data++ = csio_rd_reg32(hw, (MEMWIN0_BASE + i)); + else + csio_wr_reg32(hw, *data++, (MEMWIN0_BASE + i)); + } + + return 0; +} + +/* + * csio_memory_rw - read/write EDC 0, EDC 1 or MC via PCIE memory window + * @hw: the csio_hw + * @mtype: memory type: MEM_EDC0, MEM_EDC1 or MEM_MC + * @addr: address within indicated memory type + * @len: amount of memory to transfer + * @buf: host memory buffer + * @dir: direction of transfer 1 => read, 0 => write + * + * Reads/writes an [almost] arbitrary memory region in the firmware: the + * firmware memory address, length and host buffer must be aligned on + * 32-bit boudaries. The memory is transferred as a raw byte sequence + * from/to the firmware's memory. If this memory contains data + * structures which contain multi-byte integers, it's the callers + * responsibility to perform appropriate byte order conversions. + */ +static int +csio_memory_rw(struct csio_hw *hw, int mtype, u32 addr, u32 len, + uint32_t *buf, int dir) +{ + uint32_t pos, start, end, offset, memoffset; + int ret; + __be32 *data; + + /* + * Argument sanity checks ... + */ + if ((addr & 0x3) || (len & 0x3)) + return -EINVAL; + + data = kzalloc(MEMWIN0_APERTURE, GFP_KERNEL); + if (!data) + return -ENOMEM; + + /* Offset into the region of memory which is being accessed + * MEM_EDC0 = 0 + * MEM_EDC1 = 1 + * MEM_MC = 2 + */ + memoffset = (mtype * (5 * 1024 * 1024)); + + /* Determine the PCIE_MEM_ACCESS_OFFSET */ + addr = addr + memoffset; + + /* + * The underlaying EDC/MC read routines read MEMWIN0_APERTURE bytes + * at a time so we need to round down the start and round up the end. + * We'll start copying out of the first line at (addr - start) a word + * at a time. + */ + start = addr & ~(MEMWIN0_APERTURE-1); + end = (addr + len + MEMWIN0_APERTURE-1) & ~(MEMWIN0_APERTURE-1); + offset = (addr - start)/sizeof(__be32); + + for (pos = start; pos < end; pos += MEMWIN0_APERTURE, offset = 0) { + /* + * If we're writing, copy the data from the caller's memory + * buffer + */ + if (!dir) { + /* + * If we're doing a partial write, then we need to do + * a read-modify-write ... + */ + if (offset || len < MEMWIN0_APERTURE) { + ret = csio_mem_win_rw(hw, pos, data, 1); + if (ret) { + kfree(data); + return ret; + } + } + while (offset < (MEMWIN0_APERTURE/sizeof(__be32)) && + len > 0) { + data[offset++] = *buf++; + len -= sizeof(__be32); + } + } + + /* + * Transfer a block of memory and bail if there's an error. + */ + ret = csio_mem_win_rw(hw, pos, data, dir); + if (ret) { + kfree(data); + return ret; + } + + /* + * If we're reading, copy the data into the caller's memory + * buffer. + */ + if (dir) + while (offset < (MEMWIN0_APERTURE/sizeof(__be32)) && + len > 0) { + *buf++ = data[offset++]; + len -= sizeof(__be32); + } + } + + kfree(data); + + return 0; +} + +static int +csio_memory_write(struct csio_hw *hw, int mtype, u32 addr, u32 len, __be32 *buf) +{ + return csio_memory_rw(hw, mtype, addr, len, buf, 0); +} + +/* + * EEPROM reads take a few tens of us while writes can take a bit over 5 ms. + */ +#define EEPROM_MAX_RD_POLL 40 +#define EEPROM_MAX_WR_POLL 6 +#define EEPROM_STAT_ADDR 0x7bfc +#define VPD_BASE 0x400 +#define VPD_BASE_OLD 0 +#define VPD_LEN 512 +#define VPD_INFO_FLD_HDR_SIZE 3 + +/* + * csio_hw_seeprom_read - read a serial EEPROM location + * @hw: hw to read + * @addr: EEPROM virtual address + * @data: where to store the read data + * + * Read a 32-bit word from a location in serial EEPROM using the card's PCI + * VPD capability. Note that this function must be called with a virtual + * address. + */ +static int +csio_hw_seeprom_read(struct csio_hw *hw, uint32_t addr, uint32_t *data) +{ + uint16_t val = 0; + int attempts = EEPROM_MAX_RD_POLL; + uint32_t base = hw->params.pci.vpd_cap_addr; + + if (addr >= EEPROMVSIZE || (addr & 3)) + return -EINVAL; + + pci_write_config_word(hw->pdev, base + PCI_VPD_ADDR, (uint16_t)addr); + + do { + udelay(10); + pci_read_config_word(hw->pdev, base + PCI_VPD_ADDR, &val); + } while (!(val & PCI_VPD_ADDR_F) && --attempts); + + if (!(val & PCI_VPD_ADDR_F)) { + csio_err(hw, "reading EEPROM address 0x%x failed\n", addr); + return -EINVAL; + } + + pci_read_config_dword(hw->pdev, base + PCI_VPD_DATA, data); + *data = le32_to_cpu(*data); + return 0; +} + +/* + * Partial EEPROM Vital Product Data structure. Includes only the ID and + * VPD-R sections. + */ +struct t4_vpd_hdr { + u8 id_tag; + u8 id_len[2]; + u8 id_data[ID_LEN]; + u8 vpdr_tag; + u8 vpdr_len[2]; +}; + +/* + * csio_hw_get_vpd_keyword_val - Locates an information field keyword in + * the VPD + * @v: Pointer to buffered vpd data structure + * @kw: The keyword to search for + * + * Returns the value of the information field keyword or + * -EINVAL otherwise. + */ +static int +csio_hw_get_vpd_keyword_val(const struct t4_vpd_hdr *v, const char *kw) +{ + int32_t i; + int32_t offset , len; + const uint8_t *buf = &v->id_tag; + const uint8_t *vpdr_len = &v->vpdr_tag; + offset = sizeof(struct t4_vpd_hdr); + len = (uint16_t)vpdr_len[1] + ((uint16_t)vpdr_len[2] << 8); + + if (len + sizeof(struct t4_vpd_hdr) > VPD_LEN) + return -EINVAL; + + for (i = offset; (i + VPD_INFO_FLD_HDR_SIZE) <= (offset + len);) { + if (memcmp(buf + i , kw, 2) == 0) { + i += VPD_INFO_FLD_HDR_SIZE; + return i; + } + + i += VPD_INFO_FLD_HDR_SIZE + buf[i+2]; + } + + return -EINVAL; +} + +static int +csio_pci_capability(struct pci_dev *pdev, int cap, int *pos) +{ + *pos = pci_find_capability(pdev, cap); + if (*pos) + return 0; + + return -1; +} + +/* + * csio_hw_get_vpd_params - read VPD parameters from VPD EEPROM + * @hw: HW module + * @p: where to store the parameters + * + * Reads card parameters stored in VPD EEPROM. + */ +static int +csio_hw_get_vpd_params(struct csio_hw *hw, struct csio_vpd *p) +{ + int i, ret, ec, sn, addr; + uint8_t *vpd, csum; + const struct t4_vpd_hdr *v; + /* To get around compilation warning from strstrip */ + char *s; + + if (csio_is_valid_vpd(hw)) + return 0; + + ret = csio_pci_capability(hw->pdev, PCI_CAP_ID_VPD, + &hw->params.pci.vpd_cap_addr); + if (ret) + return -EINVAL; + + vpd = kzalloc(VPD_LEN, GFP_ATOMIC); + if (vpd == NULL) + return -ENOMEM; + + /* + * Card information normally starts at VPD_BASE but early cards had + * it at 0. + */ + ret = csio_hw_seeprom_read(hw, VPD_BASE, (uint32_t *)(vpd)); + addr = *vpd == 0x82 ? VPD_BASE : VPD_BASE_OLD; + + for (i = 0; i < VPD_LEN; i += 4) { + ret = csio_hw_seeprom_read(hw, addr + i, (uint32_t *)(vpd + i)); + if (ret) { + kfree(vpd); + return ret; + } + } + + /* Reset the VPD flag! */ + hw->flags &= (~CSIO_HWF_VPD_VALID); + + v = (const struct t4_vpd_hdr *)vpd; + +#define FIND_VPD_KW(var, name) do { \ + var = csio_hw_get_vpd_keyword_val(v, name); \ + if (var < 0) { \ + csio_err(hw, "missing VPD keyword " name "\n"); \ + kfree(vpd); \ + return -EINVAL; \ + } \ +} while (0) + + FIND_VPD_KW(i, "RV"); + for (csum = 0; i >= 0; i--) + csum += vpd[i]; + + if (csum) { + csio_err(hw, "corrupted VPD EEPROM, actual csum %u\n", csum); + kfree(vpd); + return -EINVAL; + } + FIND_VPD_KW(ec, "EC"); + FIND_VPD_KW(sn, "SN"); +#undef FIND_VPD_KW + + memcpy(p->id, v->id_data, ID_LEN); + s = strstrip(p->id); + memcpy(p->ec, vpd + ec, EC_LEN); + s = strstrip(p->ec); + i = vpd[sn - VPD_INFO_FLD_HDR_SIZE + 2]; + memcpy(p->sn, vpd + sn, min(i, SERNUM_LEN)); + s = strstrip(p->sn); + + csio_valid_vpd_copied(hw); + + kfree(vpd); + return 0; +} + +/* + * csio_hw_sf1_read - read data from the serial flash + * @hw: the HW module + * @byte_cnt: number of bytes to read + * @cont: whether another operation will be chained + * @lock: whether to lock SF for PL access only + * @valp: where to store the read data + * + * Reads up to 4 bytes of data from the serial flash. The location of + * the read needs to be specified prior to calling this by issuing the + * appropriate commands to the serial flash. + */ +static int +csio_hw_sf1_read(struct csio_hw *hw, uint32_t byte_cnt, int32_t cont, + int32_t lock, uint32_t *valp) +{ + int ret; + + if (!byte_cnt || byte_cnt > 4) + return -EINVAL; + if (csio_rd_reg32(hw, SF_OP) & SF_BUSY) + return -EBUSY; + + cont = cont ? SF_CONT : 0; + lock = lock ? SF_LOCK : 0; + + csio_wr_reg32(hw, lock | cont | BYTECNT(byte_cnt - 1), SF_OP); + ret = csio_hw_wait_op_done_val(hw, SF_OP, SF_BUSY, 0, SF_ATTEMPTS, + 10, NULL); + if (!ret) + *valp = csio_rd_reg32(hw, SF_DATA); + return ret; +} + +/* + * csio_hw_sf1_write - write data to the serial flash + * @hw: the HW module + * @byte_cnt: number of bytes to write + * @cont: whether another operation will be chained + * @lock: whether to lock SF for PL access only + * @val: value to write + * + * Writes up to 4 bytes of data to the serial flash. The location of + * the write needs to be specified prior to calling this by issuing the + * appropriate commands to the serial flash. + */ +static int +csio_hw_sf1_write(struct csio_hw *hw, uint32_t byte_cnt, uint32_t cont, + int32_t lock, uint32_t val) +{ + if (!byte_cnt || byte_cnt > 4) + return -EINVAL; + if (csio_rd_reg32(hw, SF_OP) & SF_BUSY) + return -EBUSY; + + cont = cont ? SF_CONT : 0; + lock = lock ? SF_LOCK : 0; + + csio_wr_reg32(hw, val, SF_DATA); + csio_wr_reg32(hw, cont | BYTECNT(byte_cnt - 1) | OP_WR | lock, SF_OP); + + return csio_hw_wait_op_done_val(hw, SF_OP, SF_BUSY, 0, SF_ATTEMPTS, + 10, NULL); +} + +/* + * csio_hw_flash_wait_op - wait for a flash operation to complete + * @hw: the HW module + * @attempts: max number of polls of the status register + * @delay: delay between polls in ms + * + * Wait for a flash operation to complete by polling the status register. + */ +static int +csio_hw_flash_wait_op(struct csio_hw *hw, int32_t attempts, int32_t delay) +{ + int ret; + uint32_t status; + + while (1) { + ret = csio_hw_sf1_write(hw, 1, 1, 1, SF_RD_STATUS); + if (ret != 0) + return ret; + + ret = csio_hw_sf1_read(hw, 1, 0, 1, &status); + if (ret != 0) + return ret; + + if (!(status & 1)) + return 0; + if (--attempts == 0) + return -EAGAIN; + if (delay) + msleep(delay); + } +} + +/* + * csio_hw_read_flash - read words from serial flash + * @hw: the HW module + * @addr: the start address for the read + * @nwords: how many 32-bit words to read + * @data: where to store the read data + * @byte_oriented: whether to store data as bytes or as words + * + * Read the specified number of 32-bit words from the serial flash. + * If @byte_oriented is set the read data is stored as a byte array + * (i.e., big-endian), otherwise as 32-bit words in the platform's + * natural endianess. + */ +static int +csio_hw_read_flash(struct csio_hw *hw, uint32_t addr, uint32_t nwords, + uint32_t *data, int32_t byte_oriented) +{ + int ret; + + if (addr + nwords * sizeof(uint32_t) > hw->params.sf_size || (addr & 3)) + return -EINVAL; + + addr = swab32(addr) | SF_RD_DATA_FAST; + + ret = csio_hw_sf1_write(hw, 4, 1, 0, addr); + if (ret != 0) + return ret; + + ret = csio_hw_sf1_read(hw, 1, 1, 0, data); + if (ret != 0) + return ret; + + for ( ; nwords; nwords--, data++) { + ret = csio_hw_sf1_read(hw, 4, nwords > 1, nwords == 1, data); + if (nwords == 1) + csio_wr_reg32(hw, 0, SF_OP); /* unlock SF */ + if (ret) + return ret; + if (byte_oriented) + *data = htonl(*data); + } + return 0; +} + +/* + * csio_hw_write_flash - write up to a page of data to the serial flash + * @hw: the hw + * @addr: the start address to write + * @n: length of data to write in bytes + * @data: the data to write + * + * Writes up to a page of data (256 bytes) to the serial flash starting + * at the given address. All the data must be written to the same page. + */ +static int +csio_hw_write_flash(struct csio_hw *hw, uint32_t addr, + uint32_t n, const uint8_t *data) +{ + int ret = -EINVAL; + uint32_t buf[64]; + uint32_t i, c, left, val, offset = addr & 0xff; + + if (addr >= hw->params.sf_size || offset + n > SF_PAGE_SIZE) + return -EINVAL; + + val = swab32(addr) | SF_PROG_PAGE; + + ret = csio_hw_sf1_write(hw, 1, 0, 1, SF_WR_ENABLE); + if (ret != 0) + goto unlock; + + ret = csio_hw_sf1_write(hw, 4, 1, 1, val); + if (ret != 0) + goto unlock; + + for (left = n; left; left -= c) { + c = min(left, 4U); + for (val = 0, i = 0; i < c; ++i) + val = (val << 8) + *data++; + + ret = csio_hw_sf1_write(hw, c, c != left, 1, val); + if (ret) + goto unlock; + } + ret = csio_hw_flash_wait_op(hw, 8, 1); + if (ret) + goto unlock; + + csio_wr_reg32(hw, 0, SF_OP); /* unlock SF */ + + /* Read the page to verify the write succeeded */ + ret = csio_hw_read_flash(hw, addr & ~0xff, ARRAY_SIZE(buf), buf, 1); + if (ret) + return ret; + + if (memcmp(data - n, (uint8_t *)buf + offset, n)) { + csio_err(hw, + "failed to correctly write the flash page at %#x\n", + addr); + return -EINVAL; + } + + return 0; + +unlock: + csio_wr_reg32(hw, 0, SF_OP); /* unlock SF */ + return ret; +} + +/* + * csio_hw_flash_erase_sectors - erase a range of flash sectors + * @hw: the HW module + * @start: the first sector to erase + * @end: the last sector to erase + * + * Erases the sectors in the given inclusive range. + */ +static int +csio_hw_flash_erase_sectors(struct csio_hw *hw, int32_t start, int32_t end) +{ + int ret = 0; + + while (start <= end) { + + ret = csio_hw_sf1_write(hw, 1, 0, 1, SF_WR_ENABLE); + if (ret != 0) + goto out; + + ret = csio_hw_sf1_write(hw, 4, 0, 1, + SF_ERASE_SECTOR | (start << 8)); + if (ret != 0) + goto out; + + ret = csio_hw_flash_wait_op(hw, 14, 500); + if (ret != 0) + goto out; + + start++; + } +out: + if (ret) + csio_err(hw, "erase of flash sector %d failed, error %d\n", + start, ret); + csio_wr_reg32(hw, 0, SF_OP); /* unlock SF */ + return 0; +} + +/* + * csio_hw_flash_cfg_addr - return the address of the flash + * configuration file + * @hw: the HW module + * + * Return the address within the flash where the Firmware Configuration + * File is stored. + */ +static unsigned int +csio_hw_flash_cfg_addr(struct csio_hw *hw) +{ + if (hw->params.sf_size == 0x100000) + return FPGA_FLASH_CFG_OFFSET; + else + return FLASH_CFG_OFFSET; +} + +static void +csio_hw_print_fw_version(struct csio_hw *hw, char *str) +{ + csio_info(hw, "%s: %u.%u.%u.%u\n", str, + FW_HDR_FW_VER_MAJOR_GET(hw->fwrev), + FW_HDR_FW_VER_MINOR_GET(hw->fwrev), + FW_HDR_FW_VER_MICRO_GET(hw->fwrev), + FW_HDR_FW_VER_BUILD_GET(hw->fwrev)); +} + +/* + * csio_hw_get_fw_version - read the firmware version + * @hw: HW module + * @vers: where to place the version + * + * Reads the FW version from flash. + */ +static int +csio_hw_get_fw_version(struct csio_hw *hw, uint32_t *vers) +{ + return csio_hw_read_flash(hw, FW_IMG_START + + offsetof(struct fw_hdr, fw_ver), 1, + vers, 0); +} + +/* + * csio_hw_get_tp_version - read the TP microcode version + * @hw: HW module + * @vers: where to place the version + * + * Reads the TP microcode version from flash. + */ +static int +csio_hw_get_tp_version(struct csio_hw *hw, u32 *vers) +{ + return csio_hw_read_flash(hw, FLASH_FW_START + + offsetof(struct fw_hdr, tp_microcode_ver), 1, + vers, 0); +} + +/* + * csio_hw_check_fw_version - check if the FW is compatible with + * this driver + * @hw: HW module + * + * Checks if an adapter's FW is compatible with the driver. Returns 0 + * if there's exact match, a negative error if the version could not be + * read or there's a major/minor version mismatch/minor. + */ +static int +csio_hw_check_fw_version(struct csio_hw *hw) +{ + int ret, major, minor, micro; + + ret = csio_hw_get_fw_version(hw, &hw->fwrev); + if (!ret) + ret = csio_hw_get_tp_version(hw, &hw->tp_vers); + if (ret) + return ret; + + major = FW_HDR_FW_VER_MAJOR_GET(hw->fwrev); + minor = FW_HDR_FW_VER_MINOR_GET(hw->fwrev); + micro = FW_HDR_FW_VER_MICRO_GET(hw->fwrev); + + if (major != FW_VERSION_MAJOR) { /* major mismatch - fail */ + csio_err(hw, "card FW has major version %u, driver wants %u\n", + major, FW_VERSION_MAJOR); + return -EINVAL; + } + + if (minor == FW_VERSION_MINOR && micro == FW_VERSION_MICRO) + return 0; /* perfect match */ + + /* Minor/micro version mismatch */ + return -EINVAL; +} + +/* + * csio_hw_fw_dload - download firmware. + * @hw: HW module + * @fw_data: firmware image to write. + * @size: image size + * + * Write the supplied firmware image to the card's serial flash. + */ +static int +csio_hw_fw_dload(struct csio_hw *hw, uint8_t *fw_data, uint32_t size) +{ + uint32_t csum; + int32_t addr; + int ret; + uint32_t i; + uint8_t first_page[SF_PAGE_SIZE]; + const uint32_t *p = (const uint32_t *)fw_data; + struct fw_hdr *hdr = (struct fw_hdr *)fw_data; + uint32_t sf_sec_size; + + if ((!hw->params.sf_size) || (!hw->params.sf_nsec)) { + csio_err(hw, "Serial Flash data invalid\n"); + return -EINVAL; + } + + if (!size) { + csio_err(hw, "FW image has no data\n"); + return -EINVAL; + } + + if (size & 511) { + csio_err(hw, "FW image size not multiple of 512 bytes\n"); + return -EINVAL; + } + + if (ntohs(hdr->len512) * 512 != size) { + csio_err(hw, "FW image size differs from size in FW header\n"); + return -EINVAL; + } + + if (size > FW_MAX_SIZE) { + csio_err(hw, "FW image too large, max is %u bytes\n", + FW_MAX_SIZE); + return -EINVAL; + } + + for (csum = 0, i = 0; i < size / sizeof(csum); i++) + csum += ntohl(p[i]); + + if (csum != 0xffffffff) { + csio_err(hw, "corrupted firmware image, checksum %#x\n", csum); + return -EINVAL; + } + + sf_sec_size = hw->params.sf_size / hw->params.sf_nsec; + i = DIV_ROUND_UP(size, sf_sec_size); /* # of sectors spanned */ + + csio_dbg(hw, "Erasing sectors... start:%d end:%d\n", + FW_START_SEC, FW_START_SEC + i - 1); + + ret = csio_hw_flash_erase_sectors(hw, FW_START_SEC, + FW_START_SEC + i - 1); + if (ret) { + csio_err(hw, "Flash Erase failed\n"); + goto out; + } + + /* + * We write the correct version at the end so the driver can see a bad + * version if the FW write fails. Start by writing a copy of the + * first page with a bad version. + */ + memcpy(first_page, fw_data, SF_PAGE_SIZE); + ((struct fw_hdr *)first_page)->fw_ver = htonl(0xffffffff); + ret = csio_hw_write_flash(hw, FW_IMG_START, SF_PAGE_SIZE, first_page); + if (ret) + goto out; + + csio_dbg(hw, "Writing Flash .. start:%d end:%d\n", + FW_IMG_START, FW_IMG_START + size); + + addr = FW_IMG_START; + for (size -= SF_PAGE_SIZE; size; size -= SF_PAGE_SIZE) { + addr += SF_PAGE_SIZE; + fw_data += SF_PAGE_SIZE; + ret = csio_hw_write_flash(hw, addr, SF_PAGE_SIZE, fw_data); + if (ret) + goto out; + } + + ret = csio_hw_write_flash(hw, + FW_IMG_START + + offsetof(struct fw_hdr, fw_ver), + sizeof(hdr->fw_ver), + (const uint8_t *)&hdr->fw_ver); + +out: + if (ret) + csio_err(hw, "firmware download failed, error %d\n", ret); + return ret; +} + +static int +csio_hw_get_flash_params(struct csio_hw *hw) +{ + int ret; + uint32_t info = 0; + + ret = csio_hw_sf1_write(hw, 1, 1, 0, SF_RD_ID); + if (!ret) + ret = csio_hw_sf1_read(hw, 3, 0, 1, &info); + csio_wr_reg32(hw, 0, SF_OP); /* unlock SF */ + if (ret != 0) + return ret; + + if ((info & 0xff) != 0x20) /* not a Numonix flash */ + return -EINVAL; + info >>= 16; /* log2 of size */ + if (info >= 0x14 && info < 0x18) + hw->params.sf_nsec = 1 << (info - 16); + else if (info == 0x18) + hw->params.sf_nsec = 64; + else + return -EINVAL; + hw->params.sf_size = 1 << info; + + return 0; +} + +static void +csio_set_pcie_completion_timeout(struct csio_hw *hw, u8 range) +{ + uint16_t val; + uint32_t pcie_cap; + + if (!csio_pci_capability(hw->pdev, PCI_CAP_ID_EXP, &pcie_cap)) { + pci_read_config_word(hw->pdev, + pcie_cap + PCI_EXP_DEVCTL2, &val); + val &= 0xfff0; + val |= range ; + pci_write_config_word(hw->pdev, + pcie_cap + PCI_EXP_DEVCTL2, val); + } +} + + +/* + * Return the specified PCI-E Configuration Space register from our Physical + * Function. We try first via a Firmware LDST Command since we prefer to let + * the firmware own all of these registers, but if that fails we go for it + * directly ourselves. + */ +static uint32_t +csio_read_pcie_cfg4(struct csio_hw *hw, int reg) +{ + u32 val = 0; + struct csio_mb *mbp; + int rv; + struct fw_ldst_cmd *ldst_cmd; + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + CSIO_INC_STATS(hw, n_err_nomem); + pci_read_config_dword(hw->pdev, reg, &val); + return val; + } + + csio_mb_ldst(hw, mbp, CSIO_MB_DEFAULT_TMO, reg); + + rv = csio_mb_issue(hw, mbp); + + /* + * If the LDST Command suucceeded, exctract the returned register + * value. Otherwise read it directly ourself. + */ + if (rv == 0) { + ldst_cmd = (struct fw_ldst_cmd *)(mbp->mb); + val = ntohl(ldst_cmd->u.pcie.data[0]); + } else + pci_read_config_dword(hw->pdev, reg, &val); + + mempool_free(mbp, hw->mb_mempool); + + return val; +} /* csio_read_pcie_cfg4 */ + +static int +csio_hw_set_mem_win(struct csio_hw *hw) +{ + u32 bar0; + + /* + * Truncation intentional: we only read the bottom 32-bits of the + * 64-bit BAR0/BAR1 ... We use the hardware backdoor mechanism to + * read BAR0 instead of using pci_resource_start() because we could be + * operating from within a Virtual Machine which is trapping our + * accesses to our Configuration Space and we need to set up the PCI-E + * Memory Window decoders with the actual addresses which will be + * coming across the PCI-E link. + */ + bar0 = csio_read_pcie_cfg4(hw, PCI_BASE_ADDRESS_0); + bar0 &= PCI_BASE_ADDRESS_MEM_MASK; + + /* + * Set up memory window for accessing adapter memory ranges. (Read + * back MA register to ensure that changes propagate before we attempt + * to use the new values.) + */ + csio_wr_reg32(hw, (bar0 + MEMWIN0_BASE) | BIR(0) | + WINDOW(ilog2(MEMWIN0_APERTURE) - 10), + PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, 0)); + csio_wr_reg32(hw, (bar0 + MEMWIN1_BASE) | BIR(0) | + WINDOW(ilog2(MEMWIN1_APERTURE) - 10), + PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, 1)); + csio_wr_reg32(hw, (bar0 + MEMWIN2_BASE) | BIR(0) | + WINDOW(ilog2(MEMWIN2_APERTURE) - 10), + PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, 2)); + csio_rd_reg32(hw, PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, 2)); + return 0; +} /* csio_hw_set_mem_win */ + + + +/*****************************************************************************/ +/* HW State machine assists */ +/*****************************************************************************/ + +static int +csio_hw_dev_ready(struct csio_hw *hw) +{ + uint32_t reg; + int cnt = 6; + + while (((reg = csio_rd_reg32(hw, PL_WHOAMI)) == 0xFFFFFFFF) && + (--cnt != 0)) + mdelay(100); + + if ((cnt == 0) && (((int32_t)(SOURCEPF_GET(reg)) < 0) || + (SOURCEPF_GET(reg) >= CSIO_MAX_PFN))) { + csio_err(hw, "PL_WHOAMI returned 0x%x, cnt:%d\n", reg, cnt); + return -EIO; + } + + hw->pfn = SOURCEPF_GET(reg); + + return 0; +} + +/* + * csio_do_hello - Perform the HELLO FW Mailbox command and process response. + * @hw: HW module + * @state: Device state + * + * FW_HELLO_CMD has to be polled for completion. + */ +static int +csio_do_hello(struct csio_hw *hw, enum csio_dev_state *state) +{ + struct csio_mb *mbp; + int rv = 0; + enum csio_dev_master master; + enum fw_retval retval; + uint8_t mpfn; + char state_str[16]; + int retries = FW_CMD_HELLO_RETRIES; + + memset(state_str, 0, sizeof(state_str)); + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + rv = -ENOMEM; + CSIO_INC_STATS(hw, n_err_nomem); + goto out; + } + + master = csio_force_master ? CSIO_MASTER_MUST : CSIO_MASTER_MAY; + +retry: + csio_mb_hello(hw, mbp, CSIO_MB_DEFAULT_TMO, hw->pfn, + hw->pfn, master, NULL); + + rv = csio_mb_issue(hw, mbp); + if (rv) { + csio_err(hw, "failed to issue HELLO cmd. ret:%d.\n", rv); + goto out_free_mb; + } + + csio_mb_process_hello_rsp(hw, mbp, &retval, state, &mpfn); + if (retval != FW_SUCCESS) { + csio_err(hw, "HELLO cmd failed with ret: %d\n", retval); + rv = -EINVAL; + goto out_free_mb; + } + + /* Firmware has designated us to be master */ + if (hw->pfn == mpfn) { + hw->flags |= CSIO_HWF_MASTER; + } else if (*state == CSIO_DEV_STATE_UNINIT) { + /* + * If we're not the Master PF then we need to wait around for + * the Master PF Driver to finish setting up the adapter. + * + * Note that we also do this wait if we're a non-Master-capable + * PF and there is no current Master PF; a Master PF may show up + * momentarily and we wouldn't want to fail pointlessly. (This + * can happen when an OS loads lots of different drivers rapidly + * at the same time). In this case, the Master PF returned by + * the firmware will be PCIE_FW_MASTER_MASK so the test below + * will work ... + */ + + int waiting = FW_CMD_HELLO_TIMEOUT; + + /* + * Wait for the firmware to either indicate an error or + * initialized state. If we see either of these we bail out + * and report the issue to the caller. If we exhaust the + * "hello timeout" and we haven't exhausted our retries, try + * again. Otherwise bail with a timeout error. + */ + for (;;) { + uint32_t pcie_fw; + + msleep(50); + waiting -= 50; + + /* + * If neither Error nor Initialialized are indicated + * by the firmware keep waiting till we exaust our + * timeout ... and then retry if we haven't exhausted + * our retries ... + */ + pcie_fw = csio_rd_reg32(hw, PCIE_FW); + if (!(pcie_fw & (PCIE_FW_ERR|PCIE_FW_INIT))) { + if (waiting <= 0) { + if (retries-- > 0) + goto retry; + + rv = -ETIMEDOUT; + break; + } + continue; + } + + /* + * We either have an Error or Initialized condition + * report errors preferentially. + */ + if (state) { + if (pcie_fw & PCIE_FW_ERR) { + *state = CSIO_DEV_STATE_ERR; + rv = -ETIMEDOUT; + } else if (pcie_fw & PCIE_FW_INIT) + *state = CSIO_DEV_STATE_INIT; + } + + /* + * If we arrived before a Master PF was selected and + * there's not a valid Master PF, grab its identity + * for our caller. + */ + if (mpfn == PCIE_FW_MASTER_MASK && + (pcie_fw & PCIE_FW_MASTER_VLD)) + mpfn = PCIE_FW_MASTER_GET(pcie_fw); + break; + } + hw->flags &= ~CSIO_HWF_MASTER; + } + + switch (*state) { + case CSIO_DEV_STATE_UNINIT: + strcpy(state_str, "Initializing"); + break; + case CSIO_DEV_STATE_INIT: + strcpy(state_str, "Initialized"); + break; + case CSIO_DEV_STATE_ERR: + strcpy(state_str, "Error"); + break; + default: + strcpy(state_str, "Unknown"); + break; + } + + if (hw->pfn == mpfn) + csio_info(hw, "PF: %d, Coming up as MASTER, HW state: %s\n", + hw->pfn, state_str); + else + csio_info(hw, + "PF: %d, Coming up as SLAVE, Master PF: %d, HW state: %s\n", + hw->pfn, mpfn, state_str); + +out_free_mb: + mempool_free(mbp, hw->mb_mempool); +out: + return rv; +} + +/* + * csio_do_bye - Perform the BYE FW Mailbox command and process response. + * @hw: HW module + * + */ +static int +csio_do_bye(struct csio_hw *hw) +{ + struct csio_mb *mbp; + enum fw_retval retval; + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + CSIO_INC_STATS(hw, n_err_nomem); + return -ENOMEM; + } + + csio_mb_bye(hw, mbp, CSIO_MB_DEFAULT_TMO, NULL); + + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "Issue of BYE command failed\n"); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + retval = csio_mb_fw_retval(mbp); + if (retval != FW_SUCCESS) { + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + mempool_free(mbp, hw->mb_mempool); + + return 0; +} + +/* + * csio_do_reset- Perform the device reset. + * @hw: HW module + * @fw_rst: FW reset + * + * If fw_rst is set, issues FW reset mbox cmd otherwise + * does PIO reset. + * Performs reset of the function. + */ +static int +csio_do_reset(struct csio_hw *hw, bool fw_rst) +{ + struct csio_mb *mbp; + enum fw_retval retval; + + if (!fw_rst) { + /* PIO reset */ + csio_wr_reg32(hw, PIORSTMODE | PIORST, PL_RST); + mdelay(2000); + return 0; + } + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + CSIO_INC_STATS(hw, n_err_nomem); + return -ENOMEM; + } + + csio_mb_reset(hw, mbp, CSIO_MB_DEFAULT_TMO, + PIORSTMODE | PIORST, 0, NULL); + + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "Issue of RESET command failed.n"); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + retval = csio_mb_fw_retval(mbp); + if (retval != FW_SUCCESS) { + csio_err(hw, "RESET cmd failed with ret:0x%x.\n", retval); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + mempool_free(mbp, hw->mb_mempool); + + return 0; +} + +static int +csio_hw_validate_caps(struct csio_hw *hw, struct csio_mb *mbp) +{ + struct fw_caps_config_cmd *rsp = (struct fw_caps_config_cmd *)mbp->mb; + uint16_t caps; + + caps = ntohs(rsp->fcoecaps); + + if (!(caps & FW_CAPS_CONFIG_FCOE_INITIATOR)) { + csio_err(hw, "No FCoE Initiator capability in the firmware.\n"); + return -EINVAL; + } + + if (!(caps & FW_CAPS_CONFIG_FCOE_CTRL_OFLD)) { + csio_err(hw, "No FCoE Control Offload capability\n"); + return -EINVAL; + } + + return 0; +} + +/* + * csio_hw_fw_halt - issue a reset/halt to FW and put uP into RESET + * @hw: the HW module + * @mbox: mailbox to use for the FW RESET command (if desired) + * @force: force uP into RESET even if FW RESET command fails + * + * Issues a RESET command to firmware (if desired) with a HALT indication + * and then puts the microprocessor into RESET state. The RESET command + * will only be issued if a legitimate mailbox is provided (mbox <= + * PCIE_FW_MASTER_MASK). + * + * This is generally used in order for the host to safely manipulate the + * adapter without fear of conflicting with whatever the firmware might + * be doing. The only way out of this state is to RESTART the firmware + * ... + */ +static int +csio_hw_fw_halt(struct csio_hw *hw, uint32_t mbox, int32_t force) +{ + enum fw_retval retval = 0; + + /* + * If a legitimate mailbox is provided, issue a RESET command + * with a HALT indication. + */ + if (mbox <= PCIE_FW_MASTER_MASK) { + struct csio_mb *mbp; + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + CSIO_INC_STATS(hw, n_err_nomem); + return -ENOMEM; + } + + csio_mb_reset(hw, mbp, CSIO_MB_DEFAULT_TMO, + PIORSTMODE | PIORST, FW_RESET_CMD_HALT(1), + NULL); + + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "Issue of RESET command failed!\n"); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + retval = csio_mb_fw_retval(mbp); + mempool_free(mbp, hw->mb_mempool); + } + + /* + * Normally we won't complete the operation if the firmware RESET + * command fails but if our caller insists we'll go ahead and put the + * uP into RESET. This can be useful if the firmware is hung or even + * missing ... We'll have to take the risk of putting the uP into + * RESET without the cooperation of firmware in that case. + * + * We also force the firmware's HALT flag to be on in case we bypassed + * the firmware RESET command above or we're dealing with old firmware + * which doesn't have the HALT capability. This will serve as a flag + * for the incoming firmware to know that it's coming out of a HALT + * rather than a RESET ... if it's new enough to understand that ... + */ + if (retval == 0 || force) { + csio_set_reg_field(hw, CIM_BOOT_CFG, UPCRST, UPCRST); + csio_set_reg_field(hw, PCIE_FW, PCIE_FW_HALT, PCIE_FW_HALT); + } + + /* + * And we always return the result of the firmware RESET command + * even when we force the uP into RESET ... + */ + return retval ? -EINVAL : 0; +} + +/* + * csio_hw_fw_restart - restart the firmware by taking the uP out of RESET + * @hw: the HW module + * @reset: if we want to do a RESET to restart things + * + * Restart firmware previously halted by csio_hw_fw_halt(). On successful + * return the previous PF Master remains as the new PF Master and there + * is no need to issue a new HELLO command, etc. + * + * We do this in two ways: + * + * 1. If we're dealing with newer firmware we'll simply want to take + * the chip's microprocessor out of RESET. This will cause the + * firmware to start up from its start vector. And then we'll loop + * until the firmware indicates it's started again (PCIE_FW.HALT + * reset to 0) or we timeout. + * + * 2. If we're dealing with older firmware then we'll need to RESET + * the chip since older firmware won't recognize the PCIE_FW.HALT + * flag and automatically RESET itself on startup. + */ +static int +csio_hw_fw_restart(struct csio_hw *hw, uint32_t mbox, int32_t reset) +{ + if (reset) { + /* + * Since we're directing the RESET instead of the firmware + * doing it automatically, we need to clear the PCIE_FW.HALT + * bit. + */ + csio_set_reg_field(hw, PCIE_FW, PCIE_FW_HALT, 0); + + /* + * If we've been given a valid mailbox, first try to get the + * firmware to do the RESET. If that works, great and we can + * return success. Otherwise, if we haven't been given a + * valid mailbox or the RESET command failed, fall back to + * hitting the chip with a hammer. + */ + if (mbox <= PCIE_FW_MASTER_MASK) { + csio_set_reg_field(hw, CIM_BOOT_CFG, UPCRST, 0); + msleep(100); + if (csio_do_reset(hw, true) == 0) + return 0; + } + + csio_wr_reg32(hw, PIORSTMODE | PIORST, PL_RST); + msleep(2000); + } else { + int ms; + + csio_set_reg_field(hw, CIM_BOOT_CFG, UPCRST, 0); + for (ms = 0; ms < FW_CMD_MAX_TIMEOUT; ) { + if (!(csio_rd_reg32(hw, PCIE_FW) & PCIE_FW_HALT)) + return 0; + msleep(100); + ms += 100; + } + return -ETIMEDOUT; + } + return 0; +} + +/* + * csio_hw_fw_upgrade - perform all of the steps necessary to upgrade FW + * @hw: the HW module + * @mbox: mailbox to use for the FW RESET command (if desired) + * @fw_data: the firmware image to write + * @size: image size + * @force: force upgrade even if firmware doesn't cooperate + * + * Perform all of the steps necessary for upgrading an adapter's + * firmware image. Normally this requires the cooperation of the + * existing firmware in order to halt all existing activities + * but if an invalid mailbox token is passed in we skip that step + * (though we'll still put the adapter microprocessor into RESET in + * that case). + * + * On successful return the new firmware will have been loaded and + * the adapter will have been fully RESET losing all previous setup + * state. On unsuccessful return the adapter may be completely hosed ... + * positive errno indicates that the adapter is ~probably~ intact, a + * negative errno indicates that things are looking bad ... + */ +static int +csio_hw_fw_upgrade(struct csio_hw *hw, uint32_t mbox, + const u8 *fw_data, uint32_t size, int32_t force) +{ + const struct fw_hdr *fw_hdr = (const struct fw_hdr *)fw_data; + int reset, ret; + + ret = csio_hw_fw_halt(hw, mbox, force); + if (ret != 0 && !force) + return ret; + + ret = csio_hw_fw_dload(hw, (uint8_t *) fw_data, size); + if (ret != 0) + return ret; + + /* + * Older versions of the firmware don't understand the new + * PCIE_FW.HALT flag and so won't know to perform a RESET when they + * restart. So for newly loaded older firmware we'll have to do the + * RESET for it so it starts up on a clean slate. We can tell if + * the newly loaded firmware will handle this right by checking + * its header flags to see if it advertises the capability. + */ + reset = ((ntohl(fw_hdr->flags) & FW_HDR_FLAGS_RESET_HALT) == 0); + return csio_hw_fw_restart(hw, mbox, reset); +} + + +/* + * csio_hw_fw_config_file - setup an adapter via a Configuration File + * @hw: the HW module + * @mbox: mailbox to use for the FW command + * @mtype: the memory type where the Configuration File is located + * @maddr: the memory address where the Configuration File is located + * @finiver: return value for CF [fini] version + * @finicsum: return value for CF [fini] checksum + * @cfcsum: return value for CF computed checksum + * + * Issue a command to get the firmware to process the Configuration + * File located at the specified mtype/maddress. If the Configuration + * File is processed successfully and return value pointers are + * provided, the Configuration File "[fini] section version and + * checksum values will be returned along with the computed checksum. + * It's up to the caller to decide how it wants to respond to the + * checksums not matching but it recommended that a prominant warning + * be emitted in order to help people rapidly identify changed or + * corrupted Configuration Files. + * + * Also note that it's possible to modify things like "niccaps", + * "toecaps",etc. between processing the Configuration File and telling + * the firmware to use the new configuration. Callers which want to + * do this will need to "hand-roll" their own CAPS_CONFIGS commands for + * Configuration Files if they want to do this. + */ +static int +csio_hw_fw_config_file(struct csio_hw *hw, + unsigned int mtype, unsigned int maddr, + uint32_t *finiver, uint32_t *finicsum, uint32_t *cfcsum) +{ + struct csio_mb *mbp; + struct fw_caps_config_cmd *caps_cmd; + int rv = -EINVAL; + enum fw_retval ret; + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + CSIO_INC_STATS(hw, n_err_nomem); + return -ENOMEM; + } + /* + * Tell the firmware to process the indicated Configuration File. + * If there are no errors and the caller has provided return value + * pointers for the [fini] section version, checksum and computed + * checksum, pass those back to the caller. + */ + caps_cmd = (struct fw_caps_config_cmd *)(mbp->mb); + CSIO_INIT_MBP(mbp, caps_cmd, CSIO_MB_DEFAULT_TMO, hw, NULL, 1); + caps_cmd->op_to_write = + htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) | + FW_CMD_REQUEST | + FW_CMD_READ); + caps_cmd->cfvalid_to_len16 = + htonl(FW_CAPS_CONFIG_CMD_CFVALID | + FW_CAPS_CONFIG_CMD_MEMTYPE_CF(mtype) | + FW_CAPS_CONFIG_CMD_MEMADDR64K_CF(maddr >> 16) | + FW_LEN16(*caps_cmd)); + + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "Issue of FW_CAPS_CONFIG_CMD failed!\n"); + goto out; + } + + ret = csio_mb_fw_retval(mbp); + if (ret != FW_SUCCESS) { + csio_dbg(hw, "FW_CAPS_CONFIG_CMD returned %d!\n", rv); + goto out; + } + + if (finiver) + *finiver = ntohl(caps_cmd->finiver); + if (finicsum) + *finicsum = ntohl(caps_cmd->finicsum); + if (cfcsum) + *cfcsum = ntohl(caps_cmd->cfcsum); + + /* Validate device capabilities */ + if (csio_hw_validate_caps(hw, mbp)) { + rv = -ENOENT; + goto out; + } + + /* + * And now tell the firmware to use the configuration we just loaded. + */ + caps_cmd->op_to_write = + htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) | + FW_CMD_REQUEST | + FW_CMD_WRITE); + caps_cmd->cfvalid_to_len16 = htonl(FW_LEN16(*caps_cmd)); + + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "Issue of FW_CAPS_CONFIG_CMD failed!\n"); + goto out; + } + + ret = csio_mb_fw_retval(mbp); + if (ret != FW_SUCCESS) { + csio_dbg(hw, "FW_CAPS_CONFIG_CMD returned %d!\n", rv); + goto out; + } + + rv = 0; +out: + mempool_free(mbp, hw->mb_mempool); + return rv; +} + +/* + * csio_get_device_params - Get device parameters. + * @hw: HW module + * + */ +static int +csio_get_device_params(struct csio_hw *hw) +{ + struct csio_wrm *wrm = csio_hw_to_wrm(hw); + struct csio_mb *mbp; + enum fw_retval retval; + u32 param[6]; + int i, j = 0; + + /* Initialize portids to -1 */ + for (i = 0; i < CSIO_MAX_PPORTS; i++) + hw->pport[i].portid = -1; + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + CSIO_INC_STATS(hw, n_err_nomem); + return -ENOMEM; + } + + /* Get port vec information. */ + param[0] = FW_PARAM_DEV(PORTVEC); + + /* Get Core clock. */ + param[1] = FW_PARAM_DEV(CCLK); + + /* Get EQ id start and end. */ + param[2] = FW_PARAM_PFVF(EQ_START); + param[3] = FW_PARAM_PFVF(EQ_END); + + /* Get IQ id start and end. */ + param[4] = FW_PARAM_PFVF(IQFLINT_START); + param[5] = FW_PARAM_PFVF(IQFLINT_END); + + csio_mb_params(hw, mbp, CSIO_MB_DEFAULT_TMO, hw->pfn, 0, + ARRAY_SIZE(param), param, NULL, false, NULL); + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "Issue of FW_PARAMS_CMD(read) failed!\n"); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + csio_mb_process_read_params_rsp(hw, mbp, &retval, + ARRAY_SIZE(param), param); + if (retval != FW_SUCCESS) { + csio_err(hw, "FW_PARAMS_CMD(read) failed with ret:0x%x!\n", + retval); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + /* cache the information. */ + hw->port_vec = param[0]; + hw->vpd.cclk = param[1]; + wrm->fw_eq_start = param[2]; + wrm->fw_iq_start = param[4]; + + /* Using FW configured max iqs & eqs */ + if ((hw->flags & CSIO_HWF_USING_SOFT_PARAMS) || + !csio_is_hw_master(hw)) { + hw->cfg_niq = param[5] - param[4] + 1; + hw->cfg_neq = param[3] - param[2] + 1; + csio_dbg(hw, "Using fwconfig max niqs %d neqs %d\n", + hw->cfg_niq, hw->cfg_neq); + } + + hw->port_vec &= csio_port_mask; + + hw->num_pports = hweight32(hw->port_vec); + + csio_dbg(hw, "Port vector: 0x%x, #ports: %d\n", + hw->port_vec, hw->num_pports); + + for (i = 0; i < hw->num_pports; i++) { + while ((hw->port_vec & (1 << j)) == 0) + j++; + hw->pport[i].portid = j++; + csio_dbg(hw, "Found Port:%d\n", hw->pport[i].portid); + } + mempool_free(mbp, hw->mb_mempool); + + return 0; +} + + +/* + * csio_config_device_caps - Get and set device capabilities. + * @hw: HW module + * + */ +static int +csio_config_device_caps(struct csio_hw *hw) +{ + struct csio_mb *mbp; + enum fw_retval retval; + int rv = -EINVAL; + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + CSIO_INC_STATS(hw, n_err_nomem); + return -ENOMEM; + } + + /* Get device capabilities */ + csio_mb_caps_config(hw, mbp, CSIO_MB_DEFAULT_TMO, 0, 0, 0, 0, NULL); + + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "Issue of FW_CAPS_CONFIG_CMD(r) failed!\n"); + goto out; + } + + retval = csio_mb_fw_retval(mbp); + if (retval != FW_SUCCESS) { + csio_err(hw, "FW_CAPS_CONFIG_CMD(r) returned %d!\n", retval); + goto out; + } + + /* Validate device capabilities */ + if (csio_hw_validate_caps(hw, mbp)) + goto out; + + /* Don't config device capabilities if already configured */ + if (hw->fw_state == CSIO_DEV_STATE_INIT) { + rv = 0; + goto out; + } + + /* Write back desired device capabilities */ + csio_mb_caps_config(hw, mbp, CSIO_MB_DEFAULT_TMO, true, true, + false, true, NULL); + + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "Issue of FW_CAPS_CONFIG_CMD(w) failed!\n"); + goto out; + } + + retval = csio_mb_fw_retval(mbp); + if (retval != FW_SUCCESS) { + csio_err(hw, "FW_CAPS_CONFIG_CMD(w) returned %d!\n", retval); + goto out; + } + + rv = 0; +out: + mempool_free(mbp, hw->mb_mempool); + return rv; +} + +static int +csio_config_global_rss(struct csio_hw *hw) +{ + struct csio_mb *mbp; + enum fw_retval retval; + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + CSIO_INC_STATS(hw, n_err_nomem); + return -ENOMEM; + } + + csio_rss_glb_config(hw, mbp, CSIO_MB_DEFAULT_TMO, + FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL, + FW_RSS_GLB_CONFIG_CMD_TNLMAPEN | + FW_RSS_GLB_CONFIG_CMD_HASHTOEPLITZ | + FW_RSS_GLB_CONFIG_CMD_TNLALLLKP, + NULL); + + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "Issue of FW_RSS_GLB_CONFIG_CMD failed!\n"); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + retval = csio_mb_fw_retval(mbp); + if (retval != FW_SUCCESS) { + csio_err(hw, "FW_RSS_GLB_CONFIG_CMD returned 0x%x!\n", retval); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + mempool_free(mbp, hw->mb_mempool); + + return 0; +} + +/* + * csio_config_pfvf - Configure Physical/Virtual functions settings. + * @hw: HW module + * + */ +static int +csio_config_pfvf(struct csio_hw *hw) +{ + struct csio_mb *mbp; + enum fw_retval retval; + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + CSIO_INC_STATS(hw, n_err_nomem); + return -ENOMEM; + } + + /* + * For now, allow all PFs to access to all ports using a pmask + * value of 0xF (M_FW_PFVF_CMD_PMASK). Once we have VFs, we will + * need to provide access based on some rule. + */ + csio_mb_pfvf(hw, mbp, CSIO_MB_DEFAULT_TMO, hw->pfn, 0, CSIO_NEQ, + CSIO_NETH_CTRL, CSIO_NIQ_FLINT, 0, 0, CSIO_NVI, CSIO_CMASK, + CSIO_PMASK, CSIO_NEXACTF, CSIO_R_CAPS, CSIO_WX_CAPS, NULL); + + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "Issue of FW_PFVF_CMD failed!\n"); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + retval = csio_mb_fw_retval(mbp); + if (retval != FW_SUCCESS) { + csio_err(hw, "FW_PFVF_CMD returned 0x%x!\n", retval); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + mempool_free(mbp, hw->mb_mempool); + + return 0; +} + +/* + * csio_enable_ports - Bring up all available ports. + * @hw: HW module. + * + */ +static int +csio_enable_ports(struct csio_hw *hw) +{ + struct csio_mb *mbp; + enum fw_retval retval; + uint8_t portid; + int i; + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + CSIO_INC_STATS(hw, n_err_nomem); + return -ENOMEM; + } + + for (i = 0; i < hw->num_pports; i++) { + portid = hw->pport[i].portid; + + /* Read PORT information */ + csio_mb_port(hw, mbp, CSIO_MB_DEFAULT_TMO, portid, + false, 0, 0, NULL); + + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "failed to issue FW_PORT_CMD(r) port:%d\n", + portid); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + csio_mb_process_read_port_rsp(hw, mbp, &retval, + &hw->pport[i].pcap); + if (retval != FW_SUCCESS) { + csio_err(hw, "FW_PORT_CMD(r) port:%d failed: 0x%x\n", + portid, retval); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + /* Write back PORT information */ + csio_mb_port(hw, mbp, CSIO_MB_DEFAULT_TMO, portid, true, + (PAUSE_RX | PAUSE_TX), hw->pport[i].pcap, NULL); + + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "failed to issue FW_PORT_CMD(w) port:%d\n", + portid); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + retval = csio_mb_fw_retval(mbp); + if (retval != FW_SUCCESS) { + csio_err(hw, "FW_PORT_CMD(w) port:%d failed :0x%x\n", + portid, retval); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + } /* For all ports */ + + mempool_free(mbp, hw->mb_mempool); + + return 0; +} + +/* + * csio_get_fcoe_resinfo - Read fcoe fw resource info. + * @hw: HW module + * Issued with lock held. + */ +static int +csio_get_fcoe_resinfo(struct csio_hw *hw) +{ + struct csio_fcoe_res_info *res_info = &hw->fres_info; + struct fw_fcoe_res_info_cmd *rsp; + struct csio_mb *mbp; + enum fw_retval retval; + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + CSIO_INC_STATS(hw, n_err_nomem); + return -ENOMEM; + } + + /* Get FCoE FW resource information */ + csio_fcoe_read_res_info_init_mb(hw, mbp, CSIO_MB_DEFAULT_TMO, NULL); + + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "failed to issue FW_FCOE_RES_INFO_CMD\n"); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + rsp = (struct fw_fcoe_res_info_cmd *)(mbp->mb); + retval = FW_CMD_RETVAL_GET(ntohl(rsp->retval_len16)); + if (retval != FW_SUCCESS) { + csio_err(hw, "FW_FCOE_RES_INFO_CMD failed with ret x%x\n", + retval); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + res_info->e_d_tov = ntohs(rsp->e_d_tov); + res_info->r_a_tov_seq = ntohs(rsp->r_a_tov_seq); + res_info->r_a_tov_els = ntohs(rsp->r_a_tov_els); + res_info->r_r_tov = ntohs(rsp->r_r_tov); + res_info->max_xchgs = ntohl(rsp->max_xchgs); + res_info->max_ssns = ntohl(rsp->max_ssns); + res_info->used_xchgs = ntohl(rsp->used_xchgs); + res_info->used_ssns = ntohl(rsp->used_ssns); + res_info->max_fcfs = ntohl(rsp->max_fcfs); + res_info->max_vnps = ntohl(rsp->max_vnps); + res_info->used_fcfs = ntohl(rsp->used_fcfs); + res_info->used_vnps = ntohl(rsp->used_vnps); + + csio_dbg(hw, "max ssns:%d max xchgs:%d\n", res_info->max_ssns, + res_info->max_xchgs); + mempool_free(mbp, hw->mb_mempool); + + return 0; +} + +static int +csio_hw_check_fwconfig(struct csio_hw *hw, u32 *param) +{ + struct csio_mb *mbp; + enum fw_retval retval; + u32 _param[1]; + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + CSIO_INC_STATS(hw, n_err_nomem); + return -ENOMEM; + } + + /* + * Find out whether we're dealing with a version of + * the firmware which has configuration file support. + */ + _param[0] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | + FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_CF)); + + csio_mb_params(hw, mbp, CSIO_MB_DEFAULT_TMO, hw->pfn, 0, + ARRAY_SIZE(_param), _param, NULL, false, NULL); + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "Issue of FW_PARAMS_CMD(read) failed!\n"); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + csio_mb_process_read_params_rsp(hw, mbp, &retval, + ARRAY_SIZE(_param), _param); + if (retval != FW_SUCCESS) { + csio_err(hw, "FW_PARAMS_CMD(read) failed with ret:0x%x!\n", + retval); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + mempool_free(mbp, hw->mb_mempool); + *param = _param[0]; + + return 0; +} + +static int +csio_hw_flash_config(struct csio_hw *hw, u32 *fw_cfg_param, char *path) +{ + int ret = 0; + const struct firmware *cf; + struct pci_dev *pci_dev = hw->pdev; + struct device *dev = &pci_dev->dev; + + unsigned int mtype = 0, maddr = 0; + uint32_t *cfg_data; + int value_to_add = 0; + + if (request_firmware(&cf, CSIO_CF_FNAME, dev) < 0) { + csio_err(hw, "could not find config file " CSIO_CF_FNAME + ",err: %d\n", ret); + return -ENOENT; + } + + if (cf->size%4 != 0) + value_to_add = 4 - (cf->size % 4); + + cfg_data = kzalloc(cf->size+value_to_add, GFP_KERNEL); + if (cfg_data == NULL) + return -ENOMEM; + + memcpy((void *)cfg_data, (const void *)cf->data, cf->size); + + if (csio_hw_check_fwconfig(hw, fw_cfg_param) != 0) + return -EINVAL; + + mtype = FW_PARAMS_PARAM_Y_GET(*fw_cfg_param); + maddr = FW_PARAMS_PARAM_Z_GET(*fw_cfg_param) << 16; + + ret = csio_memory_write(hw, mtype, maddr, + cf->size + value_to_add, cfg_data); + if (ret == 0) { + csio_info(hw, "config file upgraded to " CSIO_CF_FNAME "\n"); + strncpy(path, "/lib/firmware/" CSIO_CF_FNAME, 64); + } + + kfree(cfg_data); + release_firmware(cf); + + return ret; +} + +/* + * HW initialization: contact FW, obtain config, perform basic init. + * + * If the firmware we're dealing with has Configuration File support, then + * we use that to perform all configuration -- either using the configuration + * file stored in flash on the adapter or using a filesystem-local file + * if available. + * + * If we don't have configuration file support in the firmware, then we'll + * have to set things up the old fashioned way with hard-coded register + * writes and firmware commands ... + */ + +/* + * Attempt to initialize the HW via a Firmware Configuration File. + */ +static int +csio_hw_use_fwconfig(struct csio_hw *hw, int reset, u32 *fw_cfg_param) +{ + unsigned int mtype, maddr; + int rv; + uint32_t finiver, finicsum, cfcsum; + int using_flash; + char path[64]; + + /* + * Reset device if necessary + */ + if (reset) { + rv = csio_do_reset(hw, true); + if (rv != 0) + goto bye; + } + + /* + * If we have a configuration file in host , + * then use that. Otherwise, use the configuration file stored + * in the HW flash ... + */ + spin_unlock_irq(&hw->lock); + rv = csio_hw_flash_config(hw, fw_cfg_param, path); + spin_lock_irq(&hw->lock); + if (rv != 0) { + if (rv == -ENOENT) { + /* + * config file was not found. Use default + * config file from flash. + */ + mtype = FW_MEMTYPE_CF_FLASH; + maddr = csio_hw_flash_cfg_addr(hw); + using_flash = 1; + } else { + /* + * we revert back to the hardwired config if + * flashing failed. + */ + goto bye; + } + } else { + mtype = FW_PARAMS_PARAM_Y_GET(*fw_cfg_param); + maddr = FW_PARAMS_PARAM_Z_GET(*fw_cfg_param) << 16; + using_flash = 0; + } + + hw->cfg_store = (uint8_t)mtype; + + /* + * Issue a Capability Configuration command to the firmware to get it + * to parse the Configuration File. + */ + rv = csio_hw_fw_config_file(hw, mtype, maddr, &finiver, + &finicsum, &cfcsum); + if (rv != 0) + goto bye; + + hw->cfg_finiver = finiver; + hw->cfg_finicsum = finicsum; + hw->cfg_cfcsum = cfcsum; + hw->cfg_csum_status = true; + + if (finicsum != cfcsum) { + csio_warn(hw, + "Config File checksum mismatch: csum=%#x, computed=%#x\n", + finicsum, cfcsum); + + hw->cfg_csum_status = false; + } + + /* + * Note that we're operating with parameters + * not supplied by the driver, rather than from hard-wired + * initialization constants buried in the driver. + */ + hw->flags |= CSIO_HWF_USING_SOFT_PARAMS; + + /* device parameters */ + rv = csio_get_device_params(hw); + if (rv != 0) + goto bye; + + /* Configure SGE */ + csio_wr_sge_init(hw); + + /* + * And finally tell the firmware to initialize itself using the + * parameters from the Configuration File. + */ + /* Post event to notify completion of configuration */ + csio_post_event(&hw->sm, CSIO_HWE_INIT); + + csio_info(hw, + "Firmware Configuration File %s, version %#x, computed checksum %#x\n", + (using_flash ? "in device FLASH" : path), finiver, cfcsum); + + return 0; + + /* + * Something bad happened. Return the error ... + */ +bye: + hw->flags &= ~CSIO_HWF_USING_SOFT_PARAMS; + csio_dbg(hw, "Configuration file error %d\n", rv); + return rv; +} + +/* + * Attempt to initialize the adapter via hard-coded, driver supplied + * parameters ... + */ +static int +csio_hw_no_fwconfig(struct csio_hw *hw, int reset) +{ + int rv; + /* + * Reset device if necessary + */ + if (reset) { + rv = csio_do_reset(hw, true); + if (rv != 0) + goto out; + } + + /* Get and set device capabilities */ + rv = csio_config_device_caps(hw); + if (rv != 0) + goto out; + + /* Config Global RSS command */ + rv = csio_config_global_rss(hw); + if (rv != 0) + goto out; + + /* Configure PF/VF capabilities of device */ + rv = csio_config_pfvf(hw); + if (rv != 0) + goto out; + + /* device parameters */ + rv = csio_get_device_params(hw); + if (rv != 0) + goto out; + + /* Configure SGE */ + csio_wr_sge_init(hw); + + /* Post event to notify completion of configuration */ + csio_post_event(&hw->sm, CSIO_HWE_INIT); + +out: + return rv; +} + +/* + * Returns -EINVAL if attempts to flash the firmware failed + * else returns 0, + * if flashing was not attempted because the card had the + * latest firmware ECANCELED is returned + */ +static int +csio_hw_flash_fw(struct csio_hw *hw) +{ + int ret = -ECANCELED; + const struct firmware *fw; + const struct fw_hdr *hdr; + u32 fw_ver; + struct pci_dev *pci_dev = hw->pdev; + struct device *dev = &pci_dev->dev ; + + if (request_firmware(&fw, CSIO_FW_FNAME, dev) < 0) { + csio_err(hw, "could not find firmware image " CSIO_FW_FNAME + ",err: %d\n", ret); + return -EINVAL; + } + + hdr = (const struct fw_hdr *)fw->data; + fw_ver = ntohl(hdr->fw_ver); + if (FW_HDR_FW_VER_MAJOR_GET(fw_ver) != FW_VERSION_MAJOR) + return -EINVAL; /* wrong major version, won't do */ + + /* + * If the flash FW is unusable or we found something newer, load it. + */ + if (FW_HDR_FW_VER_MAJOR_GET(hw->fwrev) != FW_VERSION_MAJOR || + fw_ver > hw->fwrev) { + ret = csio_hw_fw_upgrade(hw, hw->pfn, fw->data, fw->size, + /*force=*/false); + if (!ret) + csio_info(hw, "firmware upgraded to version %pI4 from " + CSIO_FW_FNAME "\n", &hdr->fw_ver); + else + csio_err(hw, "firmware upgrade failed! err=%d\n", ret); + } + + release_firmware(fw); + + return ret; +} + + +/* + * csio_hw_configure - Configure HW + * @hw - HW module + * + */ +static void +csio_hw_configure(struct csio_hw *hw) +{ + int reset = 1; + int rv; + u32 param[1]; + + rv = csio_hw_dev_ready(hw); + if (rv != 0) { + CSIO_INC_STATS(hw, n_err_fatal); + csio_post_event(&hw->sm, CSIO_HWE_FATAL); + goto out; + } + + /* HW version */ + hw->chip_ver = (char)csio_rd_reg32(hw, PL_REV); + + /* Needed for FW download */ + rv = csio_hw_get_flash_params(hw); + if (rv != 0) { + csio_err(hw, "Failed to get serial flash params rv:%d\n", rv); + csio_post_event(&hw->sm, CSIO_HWE_FATAL); + goto out; + } + + /* Set pci completion timeout value to 4 seconds. */ + csio_set_pcie_completion_timeout(hw, 0xd); + + csio_hw_set_mem_win(hw); + + rv = csio_hw_get_fw_version(hw, &hw->fwrev); + if (rv != 0) + goto out; + + csio_hw_print_fw_version(hw, "Firmware revision"); + + rv = csio_do_hello(hw, &hw->fw_state); + if (rv != 0) { + CSIO_INC_STATS(hw, n_err_fatal); + csio_post_event(&hw->sm, CSIO_HWE_FATAL); + goto out; + } + + /* Read vpd */ + rv = csio_hw_get_vpd_params(hw, &hw->vpd); + if (rv != 0) + goto out; + + if (csio_is_hw_master(hw) && hw->fw_state != CSIO_DEV_STATE_INIT) { + rv = csio_hw_check_fw_version(hw); + if (rv == -EINVAL) { + + /* Do firmware update */ + spin_unlock_irq(&hw->lock); + rv = csio_hw_flash_fw(hw); + spin_lock_irq(&hw->lock); + + if (rv == 0) { + reset = 0; + /* + * Note that the chip was reset as part of the + * firmware upgrade so we don't reset it again + * below and grab the new firmware version. + */ + rv = csio_hw_check_fw_version(hw); + } + } + /* + * If the firmware doesn't support Configuration + * Files, use the old Driver-based, hard-wired + * initialization. Otherwise, try using the + * Configuration File support and fall back to the + * Driver-based initialization if there's no + * Configuration File found. + */ + if (csio_hw_check_fwconfig(hw, param) == 0) { + rv = csio_hw_use_fwconfig(hw, reset, param); + if (rv == -ENOENT) + goto out; + if (rv != 0) { + csio_info(hw, + "No Configuration File present " + "on adapter. Using hard-wired " + "configuration parameters.\n"); + rv = csio_hw_no_fwconfig(hw, reset); + } + } else { + rv = csio_hw_no_fwconfig(hw, reset); + } + + if (rv != 0) + goto out; + + } else { + if (hw->fw_state == CSIO_DEV_STATE_INIT) { + + /* device parameters */ + rv = csio_get_device_params(hw); + if (rv != 0) + goto out; + + /* Get device capabilities */ + rv = csio_config_device_caps(hw); + if (rv != 0) + goto out; + + /* Configure SGE */ + csio_wr_sge_init(hw); + + /* Post event to notify completion of configuration */ + csio_post_event(&hw->sm, CSIO_HWE_INIT); + goto out; + } + } /* if not master */ + +out: + return; +} + +/* + * csio_hw_initialize - Initialize HW + * @hw - HW module + * + */ +static void +csio_hw_initialize(struct csio_hw *hw) +{ + struct csio_mb *mbp; + enum fw_retval retval; + int rv; + int i; + + if (csio_is_hw_master(hw) && hw->fw_state != CSIO_DEV_STATE_INIT) { + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) + goto out; + + csio_mb_initialize(hw, mbp, CSIO_MB_DEFAULT_TMO, NULL); + + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "Issue of FW_INITIALIZE_CMD failed!\n"); + goto free_and_out; + } + + retval = csio_mb_fw_retval(mbp); + if (retval != FW_SUCCESS) { + csio_err(hw, "FW_INITIALIZE_CMD returned 0x%x!\n", + retval); + goto free_and_out; + } + + mempool_free(mbp, hw->mb_mempool); + } + + rv = csio_get_fcoe_resinfo(hw); + if (rv != 0) { + csio_err(hw, "Failed to read fcoe resource info: %d\n", rv); + goto out; + } + + spin_unlock_irq(&hw->lock); + rv = csio_config_queues(hw); + spin_lock_irq(&hw->lock); + + if (rv != 0) { + csio_err(hw, "Config of queues failed!: %d\n", rv); + goto out; + } + + for (i = 0; i < hw->num_pports; i++) + hw->pport[i].mod_type = FW_PORT_MOD_TYPE_NA; + + if (csio_is_hw_master(hw) && hw->fw_state != CSIO_DEV_STATE_INIT) { + rv = csio_enable_ports(hw); + if (rv != 0) { + csio_err(hw, "Failed to enable ports: %d\n", rv); + goto out; + } + } + + csio_post_event(&hw->sm, CSIO_HWE_INIT_DONE); + return; + +free_and_out: + mempool_free(mbp, hw->mb_mempool); +out: + return; +} + +#define PF_INTR_MASK (PFSW | PFCIM) + +/* + * csio_hw_intr_enable - Enable HW interrupts + * @hw: Pointer to HW module. + * + * Enable interrupts in HW registers. + */ +static void +csio_hw_intr_enable(struct csio_hw *hw) +{ + uint16_t vec = (uint16_t)csio_get_mb_intr_idx(csio_hw_to_mbm(hw)); + uint32_t pf = SOURCEPF_GET(csio_rd_reg32(hw, PL_WHOAMI)); + uint32_t pl = csio_rd_reg32(hw, PL_INT_ENABLE); + + /* + * Set aivec for MSI/MSIX. PCIE_PF_CFG.INTXType is set up + * by FW, so do nothing for INTX. + */ + if (hw->intr_mode == CSIO_IM_MSIX) + csio_set_reg_field(hw, MYPF_REG(PCIE_PF_CFG), + AIVEC(AIVEC_MASK), vec); + else if (hw->intr_mode == CSIO_IM_MSI) + csio_set_reg_field(hw, MYPF_REG(PCIE_PF_CFG), + AIVEC(AIVEC_MASK), 0); + + csio_wr_reg32(hw, PF_INTR_MASK, MYPF_REG(PL_PF_INT_ENABLE)); + + /* Turn on MB interrupts - this will internally flush PIO as well */ + csio_mb_intr_enable(hw); + + /* These are common registers - only a master can modify them */ + if (csio_is_hw_master(hw)) { + /* + * Disable the Serial FLASH interrupt, if enabled! + */ + pl &= (~SF); + csio_wr_reg32(hw, pl, PL_INT_ENABLE); + + csio_wr_reg32(hw, ERR_CPL_EXCEED_IQE_SIZE | + EGRESS_SIZE_ERR | ERR_INVALID_CIDX_INC | + ERR_CPL_OPCODE_0 | ERR_DROPPED_DB | + ERR_DATA_CPL_ON_HIGH_QID1 | + ERR_DATA_CPL_ON_HIGH_QID0 | ERR_BAD_DB_PIDX3 | + ERR_BAD_DB_PIDX2 | ERR_BAD_DB_PIDX1 | + ERR_BAD_DB_PIDX0 | ERR_ING_CTXT_PRIO | + ERR_EGR_CTXT_PRIO | INGRESS_SIZE_ERR, + SGE_INT_ENABLE3); + csio_set_reg_field(hw, PL_INT_MAP0, 0, 1 << pf); + } + + hw->flags |= CSIO_HWF_HW_INTR_ENABLED; + +} + +/* + * csio_hw_intr_disable - Disable HW interrupts + * @hw: Pointer to HW module. + * + * Turn off Mailbox and PCI_PF_CFG interrupts. + */ +void +csio_hw_intr_disable(struct csio_hw *hw) +{ + uint32_t pf = SOURCEPF_GET(csio_rd_reg32(hw, PL_WHOAMI)); + + if (!(hw->flags & CSIO_HWF_HW_INTR_ENABLED)) + return; + + hw->flags &= ~CSIO_HWF_HW_INTR_ENABLED; + + csio_wr_reg32(hw, 0, MYPF_REG(PL_PF_INT_ENABLE)); + if (csio_is_hw_master(hw)) + csio_set_reg_field(hw, PL_INT_MAP0, 1 << pf, 0); + + /* Turn off MB interrupts */ + csio_mb_intr_disable(hw); + +} + +static void +csio_hw_fatal_err(struct csio_hw *hw) +{ + csio_set_reg_field(hw, SGE_CONTROL, GLOBALENABLE, 0); + csio_hw_intr_disable(hw); + + /* Do not reset HW, we may need FW state for debugging */ + csio_fatal(hw, "HW Fatal error encountered!\n"); +} + +/*****************************************************************************/ +/* START: HW SM */ +/*****************************************************************************/ +/* + * csio_hws_uninit - Uninit state + * @hw - HW module + * @evt - Event + * + */ +static void +csio_hws_uninit(struct csio_hw *hw, enum csio_hw_ev evt) +{ + hw->prev_evt = hw->cur_evt; + hw->cur_evt = evt; + CSIO_INC_STATS(hw, n_evt_sm[evt]); + + switch (evt) { + case CSIO_HWE_CFG: + csio_set_state(&hw->sm, csio_hws_configuring); + csio_hw_configure(hw); + break; + + default: + CSIO_INC_STATS(hw, n_evt_unexp); + break; + } +} + +/* + * csio_hws_configuring - Configuring state + * @hw - HW module + * @evt - Event + * + */ +static void +csio_hws_configuring(struct csio_hw *hw, enum csio_hw_ev evt) +{ + hw->prev_evt = hw->cur_evt; + hw->cur_evt = evt; + CSIO_INC_STATS(hw, n_evt_sm[evt]); + + switch (evt) { + case CSIO_HWE_INIT: + csio_set_state(&hw->sm, csio_hws_initializing); + csio_hw_initialize(hw); + break; + + case CSIO_HWE_INIT_DONE: + csio_set_state(&hw->sm, csio_hws_ready); + /* Fan out event to all lnode SMs */ + csio_notify_lnodes(hw, CSIO_LN_NOTIFY_HWREADY); + break; + + case CSIO_HWE_FATAL: + csio_set_state(&hw->sm, csio_hws_uninit); + break; + + case CSIO_HWE_PCI_REMOVE: + csio_do_bye(hw); + break; + default: + CSIO_INC_STATS(hw, n_evt_unexp); + break; + } +} + +/* + * csio_hws_initializing - Initialiazing state + * @hw - HW module + * @evt - Event + * + */ +static void +csio_hws_initializing(struct csio_hw *hw, enum csio_hw_ev evt) +{ + hw->prev_evt = hw->cur_evt; + hw->cur_evt = evt; + CSIO_INC_STATS(hw, n_evt_sm[evt]); + + switch (evt) { + case CSIO_HWE_INIT_DONE: + csio_set_state(&hw->sm, csio_hws_ready); + + /* Fan out event to all lnode SMs */ + csio_notify_lnodes(hw, CSIO_LN_NOTIFY_HWREADY); + + /* Enable interrupts */ + csio_hw_intr_enable(hw); + break; + + case CSIO_HWE_FATAL: + csio_set_state(&hw->sm, csio_hws_uninit); + break; + + case CSIO_HWE_PCI_REMOVE: + csio_do_bye(hw); + break; + + default: + CSIO_INC_STATS(hw, n_evt_unexp); + break; + } +} + +/* + * csio_hws_ready - Ready state + * @hw - HW module + * @evt - Event + * + */ +static void +csio_hws_ready(struct csio_hw *hw, enum csio_hw_ev evt) +{ + /* Remember the event */ + hw->evtflag = evt; + + hw->prev_evt = hw->cur_evt; + hw->cur_evt = evt; + CSIO_INC_STATS(hw, n_evt_sm[evt]); + + switch (evt) { + case CSIO_HWE_HBA_RESET: + case CSIO_HWE_FW_DLOAD: + case CSIO_HWE_SUSPEND: + case CSIO_HWE_PCI_REMOVE: + case CSIO_HWE_PCIERR_DETECTED: + csio_set_state(&hw->sm, csio_hws_quiescing); + /* cleanup all outstanding cmds */ + if (evt == CSIO_HWE_HBA_RESET || + evt == CSIO_HWE_PCIERR_DETECTED) + csio_scsim_cleanup_io(csio_hw_to_scsim(hw), false); + else + csio_scsim_cleanup_io(csio_hw_to_scsim(hw), true); + + csio_hw_intr_disable(hw); + csio_hw_mbm_cleanup(hw); + csio_evtq_stop(hw); + csio_notify_lnodes(hw, CSIO_LN_NOTIFY_HWSTOP); + csio_evtq_flush(hw); + csio_mgmtm_cleanup(csio_hw_to_mgmtm(hw)); + csio_post_event(&hw->sm, CSIO_HWE_QUIESCED); + break; + + case CSIO_HWE_FATAL: + csio_set_state(&hw->sm, csio_hws_uninit); + break; + + default: + CSIO_INC_STATS(hw, n_evt_unexp); + break; + } +} + +/* + * csio_hws_quiescing - Quiescing state + * @hw - HW module + * @evt - Event + * + */ +static void +csio_hws_quiescing(struct csio_hw *hw, enum csio_hw_ev evt) +{ + hw->prev_evt = hw->cur_evt; + hw->cur_evt = evt; + CSIO_INC_STATS(hw, n_evt_sm[evt]); + + switch (evt) { + case CSIO_HWE_QUIESCED: + switch (hw->evtflag) { + case CSIO_HWE_FW_DLOAD: + csio_set_state(&hw->sm, csio_hws_resetting); + /* Download firmware */ + /* Fall through */ + + case CSIO_HWE_HBA_RESET: + csio_set_state(&hw->sm, csio_hws_resetting); + /* Start reset of the HBA */ + csio_notify_lnodes(hw, CSIO_LN_NOTIFY_HWRESET); + csio_wr_destroy_queues(hw, false); + csio_do_reset(hw, false); + csio_post_event(&hw->sm, CSIO_HWE_HBA_RESET_DONE); + break; + + case CSIO_HWE_PCI_REMOVE: + csio_set_state(&hw->sm, csio_hws_removing); + csio_notify_lnodes(hw, CSIO_LN_NOTIFY_HWREMOVE); + csio_wr_destroy_queues(hw, true); + /* Now send the bye command */ + csio_do_bye(hw); + break; + + case CSIO_HWE_SUSPEND: + csio_set_state(&hw->sm, csio_hws_quiesced); + break; + + case CSIO_HWE_PCIERR_DETECTED: + csio_set_state(&hw->sm, csio_hws_pcierr); + csio_wr_destroy_queues(hw, false); + break; + + default: + CSIO_INC_STATS(hw, n_evt_unexp); + break; + + } + break; + + default: + CSIO_INC_STATS(hw, n_evt_unexp); + break; + } +} + +/* + * csio_hws_quiesced - Quiesced state + * @hw - HW module + * @evt - Event + * + */ +static void +csio_hws_quiesced(struct csio_hw *hw, enum csio_hw_ev evt) +{ + hw->prev_evt = hw->cur_evt; + hw->cur_evt = evt; + CSIO_INC_STATS(hw, n_evt_sm[evt]); + + switch (evt) { + case CSIO_HWE_RESUME: + csio_set_state(&hw->sm, csio_hws_configuring); + csio_hw_configure(hw); + break; + + default: + CSIO_INC_STATS(hw, n_evt_unexp); + break; + } +} + +/* + * csio_hws_resetting - HW Resetting state + * @hw - HW module + * @evt - Event + * + */ +static void +csio_hws_resetting(struct csio_hw *hw, enum csio_hw_ev evt) +{ + hw->prev_evt = hw->cur_evt; + hw->cur_evt = evt; + CSIO_INC_STATS(hw, n_evt_sm[evt]); + + switch (evt) { + case CSIO_HWE_HBA_RESET_DONE: + csio_evtq_start(hw); + csio_set_state(&hw->sm, csio_hws_configuring); + csio_hw_configure(hw); + break; + + default: + CSIO_INC_STATS(hw, n_evt_unexp); + break; + } +} + +/* + * csio_hws_removing - PCI Hotplug removing state + * @hw - HW module + * @evt - Event + * + */ +static void +csio_hws_removing(struct csio_hw *hw, enum csio_hw_ev evt) +{ + hw->prev_evt = hw->cur_evt; + hw->cur_evt = evt; + CSIO_INC_STATS(hw, n_evt_sm[evt]); + + switch (evt) { + case CSIO_HWE_HBA_RESET: + if (!csio_is_hw_master(hw)) + break; + /* + * The BYE should have alerady been issued, so we cant + * use the mailbox interface. Hence we use the PL_RST + * register directly. + */ + csio_err(hw, "Resetting HW and waiting 2 seconds...\n"); + csio_wr_reg32(hw, PIORSTMODE | PIORST, PL_RST); + mdelay(2000); + break; + + /* Should never receive any new events */ + default: + CSIO_INC_STATS(hw, n_evt_unexp); + break; + + } +} + +/* + * csio_hws_pcierr - PCI Error state + * @hw - HW module + * @evt - Event + * + */ +static void +csio_hws_pcierr(struct csio_hw *hw, enum csio_hw_ev evt) +{ + hw->prev_evt = hw->cur_evt; + hw->cur_evt = evt; + CSIO_INC_STATS(hw, n_evt_sm[evt]); + + switch (evt) { + case CSIO_HWE_PCIERR_SLOT_RESET: + csio_evtq_start(hw); + csio_set_state(&hw->sm, csio_hws_configuring); + csio_hw_configure(hw); + break; + + default: + CSIO_INC_STATS(hw, n_evt_unexp); + break; + } +} + +/*****************************************************************************/ +/* END: HW SM */ +/*****************************************************************************/ + +/* Slow path handlers */ +struct intr_info { + unsigned int mask; /* bits to check in interrupt status */ + const char *msg; /* message to print or NULL */ + short stat_idx; /* stat counter to increment or -1 */ + unsigned short fatal; /* whether the condition reported is fatal */ +}; + +/* + * csio_handle_intr_status - table driven interrupt handler + * @hw: HW instance + * @reg: the interrupt status register to process + * @acts: table of interrupt actions + * + * A table driven interrupt handler that applies a set of masks to an + * interrupt status word and performs the corresponding actions if the + * interrupts described by the mask have occured. The actions include + * optionally emitting a warning or alert message. The table is terminated + * by an entry specifying mask 0. Returns the number of fatal interrupt + * conditions. + */ +static int +csio_handle_intr_status(struct csio_hw *hw, unsigned int reg, + const struct intr_info *acts) +{ + int fatal = 0; + unsigned int mask = 0; + unsigned int status = csio_rd_reg32(hw, reg); + + for ( ; acts->mask; ++acts) { + if (!(status & acts->mask)) + continue; + if (acts->fatal) { + fatal++; + csio_fatal(hw, "Fatal %s (0x%x)\n", + acts->msg, status & acts->mask); + } else if (acts->msg) + csio_info(hw, "%s (0x%x)\n", + acts->msg, status & acts->mask); + mask |= acts->mask; + } + status &= mask; + if (status) /* clear processed interrupts */ + csio_wr_reg32(hw, status, reg); + return fatal; +} + +/* + * Interrupt handler for the PCIE module. + */ +static void +csio_pcie_intr_handler(struct csio_hw *hw) +{ + static struct intr_info sysbus_intr_info[] = { + { RNPP, "RXNP array parity error", -1, 1 }, + { RPCP, "RXPC array parity error", -1, 1 }, + { RCIP, "RXCIF array parity error", -1, 1 }, + { RCCP, "Rx completions control array parity error", -1, 1 }, + { RFTP, "RXFT array parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + static struct intr_info pcie_port_intr_info[] = { + { TPCP, "TXPC array parity error", -1, 1 }, + { TNPP, "TXNP array parity error", -1, 1 }, + { TFTP, "TXFT array parity error", -1, 1 }, + { TCAP, "TXCA array parity error", -1, 1 }, + { TCIP, "TXCIF array parity error", -1, 1 }, + { RCAP, "RXCA array parity error", -1, 1 }, + { OTDD, "outbound request TLP discarded", -1, 1 }, + { RDPE, "Rx data parity error", -1, 1 }, + { TDUE, "Tx uncorrectable data error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + static struct intr_info pcie_intr_info[] = { + { MSIADDRLPERR, "MSI AddrL parity error", -1, 1 }, + { MSIADDRHPERR, "MSI AddrH parity error", -1, 1 }, + { MSIDATAPERR, "MSI data parity error", -1, 1 }, + { MSIXADDRLPERR, "MSI-X AddrL parity error", -1, 1 }, + { MSIXADDRHPERR, "MSI-X AddrH parity error", -1, 1 }, + { MSIXDATAPERR, "MSI-X data parity error", -1, 1 }, + { MSIXDIPERR, "MSI-X DI parity error", -1, 1 }, + { PIOCPLPERR, "PCI PIO completion FIFO parity error", -1, 1 }, + { PIOREQPERR, "PCI PIO request FIFO parity error", -1, 1 }, + { TARTAGPERR, "PCI PCI target tag FIFO parity error", -1, 1 }, + { CCNTPERR, "PCI CMD channel count parity error", -1, 1 }, + { CREQPERR, "PCI CMD channel request parity error", -1, 1 }, + { CRSPPERR, "PCI CMD channel response parity error", -1, 1 }, + { DCNTPERR, "PCI DMA channel count parity error", -1, 1 }, + { DREQPERR, "PCI DMA channel request parity error", -1, 1 }, + { DRSPPERR, "PCI DMA channel response parity error", -1, 1 }, + { HCNTPERR, "PCI HMA channel count parity error", -1, 1 }, + { HREQPERR, "PCI HMA channel request parity error", -1, 1 }, + { HRSPPERR, "PCI HMA channel response parity error", -1, 1 }, + { CFGSNPPERR, "PCI config snoop FIFO parity error", -1, 1 }, + { FIDPERR, "PCI FID parity error", -1, 1 }, + { INTXCLRPERR, "PCI INTx clear parity error", -1, 1 }, + { MATAGPERR, "PCI MA tag parity error", -1, 1 }, + { PIOTAGPERR, "PCI PIO tag parity error", -1, 1 }, + { RXCPLPERR, "PCI Rx completion parity error", -1, 1 }, + { RXWRPERR, "PCI Rx write parity error", -1, 1 }, + { RPLPERR, "PCI replay buffer parity error", -1, 1 }, + { PCIESINT, "PCI core secondary fault", -1, 1 }, + { PCIEPINT, "PCI core primary fault", -1, 1 }, + { UNXSPLCPLERR, "PCI unexpected split completion error", -1, + 0 }, + { 0, NULL, 0, 0 } + }; + + int fat; + + fat = csio_handle_intr_status(hw, + PCIE_CORE_UTL_SYSTEM_BUS_AGENT_STATUS, + sysbus_intr_info) + + csio_handle_intr_status(hw, + PCIE_CORE_UTL_PCI_EXPRESS_PORT_STATUS, + pcie_port_intr_info) + + csio_handle_intr_status(hw, PCIE_INT_CAUSE, pcie_intr_info); + if (fat) + csio_hw_fatal_err(hw); +} + +/* + * TP interrupt handler. + */ +static void csio_tp_intr_handler(struct csio_hw *hw) +{ + static struct intr_info tp_intr_info[] = { + { 0x3fffffff, "TP parity error", -1, 1 }, + { FLMTXFLSTEMPTY, "TP out of Tx pages", -1, 1 }, + { 0, NULL, 0, 0 } + }; + + if (csio_handle_intr_status(hw, TP_INT_CAUSE, tp_intr_info)) + csio_hw_fatal_err(hw); +} + +/* + * SGE interrupt handler. + */ +static void csio_sge_intr_handler(struct csio_hw *hw) +{ + uint64_t v; + + static struct intr_info sge_intr_info[] = { + { ERR_CPL_EXCEED_IQE_SIZE, + "SGE received CPL exceeding IQE size", -1, 1 }, + { ERR_INVALID_CIDX_INC, + "SGE GTS CIDX increment too large", -1, 0 }, + { ERR_CPL_OPCODE_0, "SGE received 0-length CPL", -1, 0 }, + { ERR_DROPPED_DB, "SGE doorbell dropped", -1, 0 }, + { ERR_DATA_CPL_ON_HIGH_QID1 | ERR_DATA_CPL_ON_HIGH_QID0, + "SGE IQID > 1023 received CPL for FL", -1, 0 }, + { ERR_BAD_DB_PIDX3, "SGE DBP 3 pidx increment too large", -1, + 0 }, + { ERR_BAD_DB_PIDX2, "SGE DBP 2 pidx increment too large", -1, + 0 }, + { ERR_BAD_DB_PIDX1, "SGE DBP 1 pidx increment too large", -1, + 0 }, + { ERR_BAD_DB_PIDX0, "SGE DBP 0 pidx increment too large", -1, + 0 }, + { ERR_ING_CTXT_PRIO, + "SGE too many priority ingress contexts", -1, 0 }, + { ERR_EGR_CTXT_PRIO, + "SGE too many priority egress contexts", -1, 0 }, + { INGRESS_SIZE_ERR, "SGE illegal ingress QID", -1, 0 }, + { EGRESS_SIZE_ERR, "SGE illegal egress QID", -1, 0 }, + { 0, NULL, 0, 0 } + }; + + v = (uint64_t)csio_rd_reg32(hw, SGE_INT_CAUSE1) | + ((uint64_t)csio_rd_reg32(hw, SGE_INT_CAUSE2) << 32); + if (v) { + csio_fatal(hw, "SGE parity error (%#llx)\n", + (unsigned long long)v); + csio_wr_reg32(hw, (uint32_t)(v & 0xFFFFFFFF), + SGE_INT_CAUSE1); + csio_wr_reg32(hw, (uint32_t)(v >> 32), SGE_INT_CAUSE2); + } + + v |= csio_handle_intr_status(hw, SGE_INT_CAUSE3, sge_intr_info); + + if (csio_handle_intr_status(hw, SGE_INT_CAUSE3, sge_intr_info) || + v != 0) + csio_hw_fatal_err(hw); +} + +#define CIM_OBQ_INTR (OBQULP0PARERR | OBQULP1PARERR | OBQULP2PARERR |\ + OBQULP3PARERR | OBQSGEPARERR | OBQNCSIPARERR) +#define CIM_IBQ_INTR (IBQTP0PARERR | IBQTP1PARERR | IBQULPPARERR |\ + IBQSGEHIPARERR | IBQSGELOPARERR | IBQNCSIPARERR) + +/* + * CIM interrupt handler. + */ +static void csio_cim_intr_handler(struct csio_hw *hw) +{ + static struct intr_info cim_intr_info[] = { + { PREFDROPINT, "CIM control register prefetch drop", -1, 1 }, + { CIM_OBQ_INTR, "CIM OBQ parity error", -1, 1 }, + { CIM_IBQ_INTR, "CIM IBQ parity error", -1, 1 }, + { MBUPPARERR, "CIM mailbox uP parity error", -1, 1 }, + { MBHOSTPARERR, "CIM mailbox host parity error", -1, 1 }, + { TIEQINPARERRINT, "CIM TIEQ outgoing parity error", -1, 1 }, + { TIEQOUTPARERRINT, "CIM TIEQ incoming parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + static struct intr_info cim_upintr_info[] = { + { RSVDSPACEINT, "CIM reserved space access", -1, 1 }, + { ILLTRANSINT, "CIM illegal transaction", -1, 1 }, + { ILLWRINT, "CIM illegal write", -1, 1 }, + { ILLRDINT, "CIM illegal read", -1, 1 }, + { ILLRDBEINT, "CIM illegal read BE", -1, 1 }, + { ILLWRBEINT, "CIM illegal write BE", -1, 1 }, + { SGLRDBOOTINT, "CIM single read from boot space", -1, 1 }, + { SGLWRBOOTINT, "CIM single write to boot space", -1, 1 }, + { BLKWRBOOTINT, "CIM block write to boot space", -1, 1 }, + { SGLRDFLASHINT, "CIM single read from flash space", -1, 1 }, + { SGLWRFLASHINT, "CIM single write to flash space", -1, 1 }, + { BLKWRFLASHINT, "CIM block write to flash space", -1, 1 }, + { SGLRDEEPROMINT, "CIM single EEPROM read", -1, 1 }, + { SGLWREEPROMINT, "CIM single EEPROM write", -1, 1 }, + { BLKRDEEPROMINT, "CIM block EEPROM read", -1, 1 }, + { BLKWREEPROMINT, "CIM block EEPROM write", -1, 1 }, + { SGLRDCTLINT , "CIM single read from CTL space", -1, 1 }, + { SGLWRCTLINT , "CIM single write to CTL space", -1, 1 }, + { BLKRDCTLINT , "CIM block read from CTL space", -1, 1 }, + { BLKWRCTLINT , "CIM block write to CTL space", -1, 1 }, + { SGLRDPLINT , "CIM single read from PL space", -1, 1 }, + { SGLWRPLINT , "CIM single write to PL space", -1, 1 }, + { BLKRDPLINT , "CIM block read from PL space", -1, 1 }, + { BLKWRPLINT , "CIM block write to PL space", -1, 1 }, + { REQOVRLOOKUPINT , "CIM request FIFO overwrite", -1, 1 }, + { RSPOVRLOOKUPINT , "CIM response FIFO overwrite", -1, 1 }, + { TIMEOUTINT , "CIM PIF timeout", -1, 1 }, + { TIMEOUTMAINT , "CIM PIF MA timeout", -1, 1 }, + { 0, NULL, 0, 0 } + }; + + int fat; + + fat = csio_handle_intr_status(hw, CIM_HOST_INT_CAUSE, + cim_intr_info) + + csio_handle_intr_status(hw, CIM_HOST_UPACC_INT_CAUSE, + cim_upintr_info); + if (fat) + csio_hw_fatal_err(hw); +} + +/* + * ULP RX interrupt handler. + */ +static void csio_ulprx_intr_handler(struct csio_hw *hw) +{ + static struct intr_info ulprx_intr_info[] = { + { 0x1800000, "ULPRX context error", -1, 1 }, + { 0x7fffff, "ULPRX parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + + if (csio_handle_intr_status(hw, ULP_RX_INT_CAUSE, ulprx_intr_info)) + csio_hw_fatal_err(hw); +} + +/* + * ULP TX interrupt handler. + */ +static void csio_ulptx_intr_handler(struct csio_hw *hw) +{ + static struct intr_info ulptx_intr_info[] = { + { PBL_BOUND_ERR_CH3, "ULPTX channel 3 PBL out of bounds", -1, + 0 }, + { PBL_BOUND_ERR_CH2, "ULPTX channel 2 PBL out of bounds", -1, + 0 }, + { PBL_BOUND_ERR_CH1, "ULPTX channel 1 PBL out of bounds", -1, + 0 }, + { PBL_BOUND_ERR_CH0, "ULPTX channel 0 PBL out of bounds", -1, + 0 }, + { 0xfffffff, "ULPTX parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + + if (csio_handle_intr_status(hw, ULP_TX_INT_CAUSE, ulptx_intr_info)) + csio_hw_fatal_err(hw); +} + +/* + * PM TX interrupt handler. + */ +static void csio_pmtx_intr_handler(struct csio_hw *hw) +{ + static struct intr_info pmtx_intr_info[] = { + { PCMD_LEN_OVFL0, "PMTX channel 0 pcmd too large", -1, 1 }, + { PCMD_LEN_OVFL1, "PMTX channel 1 pcmd too large", -1, 1 }, + { PCMD_LEN_OVFL2, "PMTX channel 2 pcmd too large", -1, 1 }, + { ZERO_C_CMD_ERROR, "PMTX 0-length pcmd", -1, 1 }, + { 0xffffff0, "PMTX framing error", -1, 1 }, + { OESPI_PAR_ERROR, "PMTX oespi parity error", -1, 1 }, + { DB_OPTIONS_PAR_ERROR, "PMTX db_options parity error", -1, + 1 }, + { ICSPI_PAR_ERROR, "PMTX icspi parity error", -1, 1 }, + { C_PCMD_PAR_ERROR, "PMTX c_pcmd parity error", -1, 1}, + { 0, NULL, 0, 0 } + }; + + if (csio_handle_intr_status(hw, PM_TX_INT_CAUSE, pmtx_intr_info)) + csio_hw_fatal_err(hw); +} + +/* + * PM RX interrupt handler. + */ +static void csio_pmrx_intr_handler(struct csio_hw *hw) +{ + static struct intr_info pmrx_intr_info[] = { + { ZERO_E_CMD_ERROR, "PMRX 0-length pcmd", -1, 1 }, + { 0x3ffff0, "PMRX framing error", -1, 1 }, + { OCSPI_PAR_ERROR, "PMRX ocspi parity error", -1, 1 }, + { DB_OPTIONS_PAR_ERROR, "PMRX db_options parity error", -1, + 1 }, + { IESPI_PAR_ERROR, "PMRX iespi parity error", -1, 1 }, + { E_PCMD_PAR_ERROR, "PMRX e_pcmd parity error", -1, 1}, + { 0, NULL, 0, 0 } + }; + + if (csio_handle_intr_status(hw, PM_RX_INT_CAUSE, pmrx_intr_info)) + csio_hw_fatal_err(hw); +} + +/* + * CPL switch interrupt handler. + */ +static void csio_cplsw_intr_handler(struct csio_hw *hw) +{ + static struct intr_info cplsw_intr_info[] = { + { CIM_OP_MAP_PERR, "CPLSW CIM op_map parity error", -1, 1 }, + { CIM_OVFL_ERROR, "CPLSW CIM overflow", -1, 1 }, + { TP_FRAMING_ERROR, "CPLSW TP framing error", -1, 1 }, + { SGE_FRAMING_ERROR, "CPLSW SGE framing error", -1, 1 }, + { CIM_FRAMING_ERROR, "CPLSW CIM framing error", -1, 1 }, + { ZERO_SWITCH_ERROR, "CPLSW no-switch error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + + if (csio_handle_intr_status(hw, CPL_INTR_CAUSE, cplsw_intr_info)) + csio_hw_fatal_err(hw); +} + +/* + * LE interrupt handler. + */ +static void csio_le_intr_handler(struct csio_hw *hw) +{ + static struct intr_info le_intr_info[] = { + { LIPMISS, "LE LIP miss", -1, 0 }, + { LIP0, "LE 0 LIP error", -1, 0 }, + { PARITYERR, "LE parity error", -1, 1 }, + { UNKNOWNCMD, "LE unknown command", -1, 1 }, + { REQQPARERR, "LE request queue parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + + if (csio_handle_intr_status(hw, LE_DB_INT_CAUSE, le_intr_info)) + csio_hw_fatal_err(hw); +} + +/* + * MPS interrupt handler. + */ +static void csio_mps_intr_handler(struct csio_hw *hw) +{ + static struct intr_info mps_rx_intr_info[] = { + { 0xffffff, "MPS Rx parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + static struct intr_info mps_tx_intr_info[] = { + { TPFIFO, "MPS Tx TP FIFO parity error", -1, 1 }, + { NCSIFIFO, "MPS Tx NC-SI FIFO parity error", -1, 1 }, + { TXDATAFIFO, "MPS Tx data FIFO parity error", -1, 1 }, + { TXDESCFIFO, "MPS Tx desc FIFO parity error", -1, 1 }, + { BUBBLE, "MPS Tx underflow", -1, 1 }, + { SECNTERR, "MPS Tx SOP/EOP error", -1, 1 }, + { FRMERR, "MPS Tx framing error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + static struct intr_info mps_trc_intr_info[] = { + { FILTMEM, "MPS TRC filter parity error", -1, 1 }, + { PKTFIFO, "MPS TRC packet FIFO parity error", -1, 1 }, + { MISCPERR, "MPS TRC misc parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + static struct intr_info mps_stat_sram_intr_info[] = { + { 0x1fffff, "MPS statistics SRAM parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + static struct intr_info mps_stat_tx_intr_info[] = { + { 0xfffff, "MPS statistics Tx FIFO parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + static struct intr_info mps_stat_rx_intr_info[] = { + { 0xffffff, "MPS statistics Rx FIFO parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + static struct intr_info mps_cls_intr_info[] = { + { MATCHSRAM, "MPS match SRAM parity error", -1, 1 }, + { MATCHTCAM, "MPS match TCAM parity error", -1, 1 }, + { HASHSRAM, "MPS hash SRAM parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + + int fat; + + fat = csio_handle_intr_status(hw, MPS_RX_PERR_INT_CAUSE, + mps_rx_intr_info) + + csio_handle_intr_status(hw, MPS_TX_INT_CAUSE, + mps_tx_intr_info) + + csio_handle_intr_status(hw, MPS_TRC_INT_CAUSE, + mps_trc_intr_info) + + csio_handle_intr_status(hw, MPS_STAT_PERR_INT_CAUSE_SRAM, + mps_stat_sram_intr_info) + + csio_handle_intr_status(hw, MPS_STAT_PERR_INT_CAUSE_TX_FIFO, + mps_stat_tx_intr_info) + + csio_handle_intr_status(hw, MPS_STAT_PERR_INT_CAUSE_RX_FIFO, + mps_stat_rx_intr_info) + + csio_handle_intr_status(hw, MPS_CLS_INT_CAUSE, + mps_cls_intr_info); + + csio_wr_reg32(hw, 0, MPS_INT_CAUSE); + csio_rd_reg32(hw, MPS_INT_CAUSE); /* flush */ + if (fat) + csio_hw_fatal_err(hw); +} + +#define MEM_INT_MASK (PERR_INT_CAUSE | ECC_CE_INT_CAUSE | ECC_UE_INT_CAUSE) + +/* + * EDC/MC interrupt handler. + */ +static void csio_mem_intr_handler(struct csio_hw *hw, int idx) +{ + static const char name[3][5] = { "EDC0", "EDC1", "MC" }; + + unsigned int addr, cnt_addr, v; + + if (idx <= MEM_EDC1) { + addr = EDC_REG(EDC_INT_CAUSE, idx); + cnt_addr = EDC_REG(EDC_ECC_STATUS, idx); + } else { + addr = MC_INT_CAUSE; + cnt_addr = MC_ECC_STATUS; + } + + v = csio_rd_reg32(hw, addr) & MEM_INT_MASK; + if (v & PERR_INT_CAUSE) + csio_fatal(hw, "%s FIFO parity error\n", name[idx]); + if (v & ECC_CE_INT_CAUSE) { + uint32_t cnt = ECC_CECNT_GET(csio_rd_reg32(hw, cnt_addr)); + + csio_wr_reg32(hw, ECC_CECNT_MASK, cnt_addr); + csio_warn(hw, "%u %s correctable ECC data error%s\n", + cnt, name[idx], cnt > 1 ? "s" : ""); + } + if (v & ECC_UE_INT_CAUSE) + csio_fatal(hw, "%s uncorrectable ECC data error\n", name[idx]); + + csio_wr_reg32(hw, v, addr); + if (v & (PERR_INT_CAUSE | ECC_UE_INT_CAUSE)) + csio_hw_fatal_err(hw); +} + +/* + * MA interrupt handler. + */ +static void csio_ma_intr_handler(struct csio_hw *hw) +{ + uint32_t v, status = csio_rd_reg32(hw, MA_INT_CAUSE); + + if (status & MEM_PERR_INT_CAUSE) + csio_fatal(hw, "MA parity error, parity status %#x\n", + csio_rd_reg32(hw, MA_PARITY_ERROR_STATUS)); + if (status & MEM_WRAP_INT_CAUSE) { + v = csio_rd_reg32(hw, MA_INT_WRAP_STATUS); + csio_fatal(hw, + "MA address wrap-around error by client %u to address %#x\n", + MEM_WRAP_CLIENT_NUM_GET(v), MEM_WRAP_ADDRESS_GET(v) << 4); + } + csio_wr_reg32(hw, status, MA_INT_CAUSE); + csio_hw_fatal_err(hw); +} + +/* + * SMB interrupt handler. + */ +static void csio_smb_intr_handler(struct csio_hw *hw) +{ + static struct intr_info smb_intr_info[] = { + { MSTTXFIFOPARINT, "SMB master Tx FIFO parity error", -1, 1 }, + { MSTRXFIFOPARINT, "SMB master Rx FIFO parity error", -1, 1 }, + { SLVFIFOPARINT, "SMB slave FIFO parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + + if (csio_handle_intr_status(hw, SMB_INT_CAUSE, smb_intr_info)) + csio_hw_fatal_err(hw); +} + +/* + * NC-SI interrupt handler. + */ +static void csio_ncsi_intr_handler(struct csio_hw *hw) +{ + static struct intr_info ncsi_intr_info[] = { + { CIM_DM_PRTY_ERR, "NC-SI CIM parity error", -1, 1 }, + { MPS_DM_PRTY_ERR, "NC-SI MPS parity error", -1, 1 }, + { TXFIFO_PRTY_ERR, "NC-SI Tx FIFO parity error", -1, 1 }, + { RXFIFO_PRTY_ERR, "NC-SI Rx FIFO parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + + if (csio_handle_intr_status(hw, NCSI_INT_CAUSE, ncsi_intr_info)) + csio_hw_fatal_err(hw); +} + +/* + * XGMAC interrupt handler. + */ +static void csio_xgmac_intr_handler(struct csio_hw *hw, int port) +{ + uint32_t v = csio_rd_reg32(hw, PORT_REG(port, XGMAC_PORT_INT_CAUSE)); + + v &= TXFIFO_PRTY_ERR | RXFIFO_PRTY_ERR; + if (!v) + return; + + if (v & TXFIFO_PRTY_ERR) + csio_fatal(hw, "XGMAC %d Tx FIFO parity error\n", port); + if (v & RXFIFO_PRTY_ERR) + csio_fatal(hw, "XGMAC %d Rx FIFO parity error\n", port); + csio_wr_reg32(hw, v, PORT_REG(port, XGMAC_PORT_INT_CAUSE)); + csio_hw_fatal_err(hw); +} + +/* + * PL interrupt handler. + */ +static void csio_pl_intr_handler(struct csio_hw *hw) +{ + static struct intr_info pl_intr_info[] = { + { FATALPERR, "T4 fatal parity error", -1, 1 }, + { PERRVFID, "PL VFID_MAP parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + + if (csio_handle_intr_status(hw, PL_PL_INT_CAUSE, pl_intr_info)) + csio_hw_fatal_err(hw); +} + +/* + * csio_hw_slow_intr_handler - control path interrupt handler + * @hw: HW module + * + * Interrupt handler for non-data global interrupt events, e.g., errors. + * The designation 'slow' is because it involves register reads, while + * data interrupts typically don't involve any MMIOs. + */ +int +csio_hw_slow_intr_handler(struct csio_hw *hw) +{ + uint32_t cause = csio_rd_reg32(hw, PL_INT_CAUSE); + + if (!(cause & CSIO_GLBL_INTR_MASK)) { + CSIO_INC_STATS(hw, n_plint_unexp); + return 0; + } + + csio_dbg(hw, "Slow interrupt! cause: 0x%x\n", cause); + + CSIO_INC_STATS(hw, n_plint_cnt); + + if (cause & CIM) + csio_cim_intr_handler(hw); + + if (cause & MPS) + csio_mps_intr_handler(hw); + + if (cause & NCSI) + csio_ncsi_intr_handler(hw); + + if (cause & PL) + csio_pl_intr_handler(hw); + + if (cause & SMB) + csio_smb_intr_handler(hw); + + if (cause & XGMAC0) + csio_xgmac_intr_handler(hw, 0); + + if (cause & XGMAC1) + csio_xgmac_intr_handler(hw, 1); + + if (cause & XGMAC_KR0) + csio_xgmac_intr_handler(hw, 2); + + if (cause & XGMAC_KR1) + csio_xgmac_intr_handler(hw, 3); + + if (cause & PCIE) + csio_pcie_intr_handler(hw); + + if (cause & MC) + csio_mem_intr_handler(hw, MEM_MC); + + if (cause & EDC0) + csio_mem_intr_handler(hw, MEM_EDC0); + + if (cause & EDC1) + csio_mem_intr_handler(hw, MEM_EDC1); + + if (cause & LE) + csio_le_intr_handler(hw); + + if (cause & TP) + csio_tp_intr_handler(hw); + + if (cause & MA) + csio_ma_intr_handler(hw); + + if (cause & PM_TX) + csio_pmtx_intr_handler(hw); + + if (cause & PM_RX) + csio_pmrx_intr_handler(hw); + + if (cause & ULP_RX) + csio_ulprx_intr_handler(hw); + + if (cause & CPL_SWITCH) + csio_cplsw_intr_handler(hw); + + if (cause & SGE) + csio_sge_intr_handler(hw); + + if (cause & ULP_TX) + csio_ulptx_intr_handler(hw); + + /* Clear the interrupts just processed for which we are the master. */ + csio_wr_reg32(hw, cause & CSIO_GLBL_INTR_MASK, PL_INT_CAUSE); + csio_rd_reg32(hw, PL_INT_CAUSE); /* flush */ + + return 1; +} + +/***************************************************************************** + * HW <--> mailbox interfacing routines. + ****************************************************************************/ +/* + * csio_mberr_worker - Worker thread (dpc) for mailbox/error completions + * + * @data: Private data pointer. + * + * Called from worker thread context. + */ +static void +csio_mberr_worker(void *data) +{ + struct csio_hw *hw = (struct csio_hw *)data; + struct csio_mbm *mbm = &hw->mbm; + LIST_HEAD(cbfn_q); + struct csio_mb *mbp_next; + int rv; + + del_timer_sync(&mbm->timer); + + spin_lock_irq(&hw->lock); + if (list_empty(&mbm->cbfn_q)) { + spin_unlock_irq(&hw->lock); + return; + } + + list_splice_tail_init(&mbm->cbfn_q, &cbfn_q); + mbm->stats.n_cbfnq = 0; + + /* Try to start waiting mailboxes */ + if (!list_empty(&mbm->req_q)) { + mbp_next = list_first_entry(&mbm->req_q, struct csio_mb, list); + list_del_init(&mbp_next->list); + + rv = csio_mb_issue(hw, mbp_next); + if (rv != 0) + list_add_tail(&mbp_next->list, &mbm->req_q); + else + CSIO_DEC_STATS(mbm, n_activeq); + } + spin_unlock_irq(&hw->lock); + + /* Now callback completions */ + csio_mb_completions(hw, &cbfn_q); +} + +/* + * csio_hw_mb_timer - Top-level Mailbox timeout handler. + * + * @data: private data pointer + * + **/ +static void +csio_hw_mb_timer(uintptr_t data) +{ + struct csio_hw *hw = (struct csio_hw *)data; + struct csio_mb *mbp = NULL; + + spin_lock_irq(&hw->lock); + mbp = csio_mb_tmo_handler(hw); + spin_unlock_irq(&hw->lock); + + /* Call back the function for the timed-out Mailbox */ + if (mbp) + mbp->mb_cbfn(hw, mbp); + +} + +/* + * csio_hw_mbm_cleanup - Cleanup Mailbox module. + * @hw: HW module + * + * Called with lock held, should exit with lock held. + * Cancels outstanding mailboxes (waiting, in-flight) and gathers them + * into a local queue. Drops lock and calls the completions. Holds + * lock and returns. + */ +static void +csio_hw_mbm_cleanup(struct csio_hw *hw) +{ + LIST_HEAD(cbfn_q); + + csio_mb_cancel_all(hw, &cbfn_q); + + spin_unlock_irq(&hw->lock); + csio_mb_completions(hw, &cbfn_q); + spin_lock_irq(&hw->lock); +} + +/***************************************************************************** + * Event handling + ****************************************************************************/ +int +csio_enqueue_evt(struct csio_hw *hw, enum csio_evt type, void *evt_msg, + uint16_t len) +{ + struct csio_evt_msg *evt_entry = NULL; + + if (type >= CSIO_EVT_MAX) + return -EINVAL; + + if (len > CSIO_EVT_MSG_SIZE) + return -EINVAL; + + if (hw->flags & CSIO_HWF_FWEVT_STOP) + return -EINVAL; + + if (list_empty(&hw->evt_free_q)) { + csio_err(hw, "Failed to alloc evt entry, msg type %d len %d\n", + type, len); + return -ENOMEM; + } + + evt_entry = list_first_entry(&hw->evt_free_q, + struct csio_evt_msg, list); + list_del_init(&evt_entry->list); + + /* copy event msg and queue the event */ + evt_entry->type = type; + memcpy((void *)evt_entry->data, evt_msg, len); + list_add_tail(&evt_entry->list, &hw->evt_active_q); + + CSIO_DEC_STATS(hw, n_evt_freeq); + CSIO_INC_STATS(hw, n_evt_activeq); + + return 0; +} + +static int +csio_enqueue_evt_lock(struct csio_hw *hw, enum csio_evt type, void *evt_msg, + uint16_t len, bool msg_sg) +{ + struct csio_evt_msg *evt_entry = NULL; + struct csio_fl_dma_buf *fl_sg; + uint32_t off = 0; + unsigned long flags; + int n, ret = 0; + + if (type >= CSIO_EVT_MAX) + return -EINVAL; + + if (len > CSIO_EVT_MSG_SIZE) + return -EINVAL; + + spin_lock_irqsave(&hw->lock, flags); + if (hw->flags & CSIO_HWF_FWEVT_STOP) { + ret = -EINVAL; + goto out; + } + + if (list_empty(&hw->evt_free_q)) { + csio_err(hw, "Failed to alloc evt entry, msg type %d len %d\n", + type, len); + ret = -ENOMEM; + goto out; + } + + evt_entry = list_first_entry(&hw->evt_free_q, + struct csio_evt_msg, list); + list_del_init(&evt_entry->list); + + /* copy event msg and queue the event */ + evt_entry->type = type; + + /* If Payload in SG list*/ + if (msg_sg) { + fl_sg = (struct csio_fl_dma_buf *) evt_msg; + for (n = 0; (n < CSIO_MAX_FLBUF_PER_IQWR && off < len); n++) { + memcpy((void *)((uintptr_t)evt_entry->data + off), + fl_sg->flbufs[n].vaddr, + fl_sg->flbufs[n].len); + off += fl_sg->flbufs[n].len; + } + } else + memcpy((void *)evt_entry->data, evt_msg, len); + + list_add_tail(&evt_entry->list, &hw->evt_active_q); + CSIO_DEC_STATS(hw, n_evt_freeq); + CSIO_INC_STATS(hw, n_evt_activeq); +out: + spin_unlock_irqrestore(&hw->lock, flags); + return ret; +} + +static void +csio_free_evt(struct csio_hw *hw, struct csio_evt_msg *evt_entry) +{ + if (evt_entry) { + spin_lock_irq(&hw->lock); + list_del_init(&evt_entry->list); + list_add_tail(&evt_entry->list, &hw->evt_free_q); + CSIO_DEC_STATS(hw, n_evt_activeq); + CSIO_INC_STATS(hw, n_evt_freeq); + spin_unlock_irq(&hw->lock); + } +} + +void +csio_evtq_flush(struct csio_hw *hw) +{ + uint32_t count; + count = 30; + while (hw->flags & CSIO_HWF_FWEVT_PENDING && count--) { + spin_unlock_irq(&hw->lock); + msleep(2000); + spin_lock_irq(&hw->lock); + } + + CSIO_DB_ASSERT(!(hw->flags & CSIO_HWF_FWEVT_PENDING)); +} + +static void +csio_evtq_stop(struct csio_hw *hw) +{ + hw->flags |= CSIO_HWF_FWEVT_STOP; +} + +static void +csio_evtq_start(struct csio_hw *hw) +{ + hw->flags &= ~CSIO_HWF_FWEVT_STOP; +} + +static void +csio_evtq_cleanup(struct csio_hw *hw) +{ + struct list_head *evt_entry, *next_entry; + + /* Release outstanding events from activeq to freeq*/ + if (!list_empty(&hw->evt_active_q)) + list_splice_tail_init(&hw->evt_active_q, &hw->evt_free_q); + + hw->stats.n_evt_activeq = 0; + hw->flags &= ~CSIO_HWF_FWEVT_PENDING; + + /* Freeup event entry */ + list_for_each_safe(evt_entry, next_entry, &hw->evt_free_q) { + kfree(evt_entry); + CSIO_DEC_STATS(hw, n_evt_freeq); + } + + hw->stats.n_evt_freeq = 0; +} + + +static void +csio_process_fwevtq_entry(struct csio_hw *hw, void *wr, uint32_t len, + struct csio_fl_dma_buf *flb, void *priv) +{ + __u8 op; + __be64 *data; + void *msg = NULL; + uint32_t msg_len = 0; + bool msg_sg = 0; + + op = ((struct rss_header *) wr)->opcode; + if (op == CPL_FW6_PLD) { + CSIO_INC_STATS(hw, n_cpl_fw6_pld); + if (!flb || !flb->totlen) { + CSIO_INC_STATS(hw, n_cpl_unexp); + return; + } + + msg = (void *) flb; + msg_len = flb->totlen; + msg_sg = 1; + + data = (__be64 *) msg; + } else if (op == CPL_FW6_MSG || op == CPL_FW4_MSG) { + + CSIO_INC_STATS(hw, n_cpl_fw6_msg); + /* skip RSS header */ + msg = (void *)((uintptr_t)wr + sizeof(__be64)); + msg_len = (op == CPL_FW6_MSG) ? sizeof(struct cpl_fw6_msg) : + sizeof(struct cpl_fw4_msg); + + data = (__be64 *) msg; + } else { + csio_warn(hw, "unexpected CPL %#x on FW event queue\n", op); + CSIO_INC_STATS(hw, n_cpl_unexp); + return; + } + + /* + * Enqueue event to EventQ. Events processing happens + * in Event worker thread context + */ + if (csio_enqueue_evt_lock(hw, CSIO_EVT_FW, msg, + (uint16_t)msg_len, msg_sg)) + CSIO_INC_STATS(hw, n_evt_drop); +} + +void +csio_evtq_worker(struct work_struct *work) +{ + struct csio_hw *hw = container_of(work, struct csio_hw, evtq_work); + struct list_head *evt_entry, *next_entry; + LIST_HEAD(evt_q); + struct csio_evt_msg *evt_msg; + struct cpl_fw6_msg *msg; + struct csio_rnode *rn; + int rv = 0; + uint8_t evtq_stop = 0; + + csio_dbg(hw, "event worker thread active evts#%d\n", + hw->stats.n_evt_activeq); + + spin_lock_irq(&hw->lock); + while (!list_empty(&hw->evt_active_q)) { + list_splice_tail_init(&hw->evt_active_q, &evt_q); + spin_unlock_irq(&hw->lock); + + list_for_each_safe(evt_entry, next_entry, &evt_q) { + evt_msg = (struct csio_evt_msg *) evt_entry; + + /* Drop events if queue is STOPPED */ + spin_lock_irq(&hw->lock); + if (hw->flags & CSIO_HWF_FWEVT_STOP) + evtq_stop = 1; + spin_unlock_irq(&hw->lock); + if (evtq_stop) { + CSIO_INC_STATS(hw, n_evt_drop); + goto free_evt; + } + + switch (evt_msg->type) { + case CSIO_EVT_FW: + msg = (struct cpl_fw6_msg *)(evt_msg->data); + + if ((msg->opcode == CPL_FW6_MSG || + msg->opcode == CPL_FW4_MSG) && + !msg->type) { + rv = csio_mb_fwevt_handler(hw, + msg->data); + if (!rv) + break; + /* Handle any remaining fw events */ + csio_fcoe_fwevt_handler(hw, + msg->opcode, msg->data); + } else if (msg->opcode == CPL_FW6_PLD) { + + csio_fcoe_fwevt_handler(hw, + msg->opcode, msg->data); + } else { + csio_warn(hw, + "Unhandled FW msg op %x type %x\n", + msg->opcode, msg->type); + CSIO_INC_STATS(hw, n_evt_drop); + } + break; + + case CSIO_EVT_MBX: + csio_mberr_worker(hw); + break; + + case CSIO_EVT_DEV_LOSS: + memcpy(&rn, evt_msg->data, sizeof(rn)); + csio_rnode_devloss_handler(rn); + break; + + default: + csio_warn(hw, "Unhandled event %x on evtq\n", + evt_msg->type); + CSIO_INC_STATS(hw, n_evt_unexp); + break; + } +free_evt: + csio_free_evt(hw, evt_msg); + } + + spin_lock_irq(&hw->lock); + } + hw->flags &= ~CSIO_HWF_FWEVT_PENDING; + spin_unlock_irq(&hw->lock); +} + +int +csio_fwevtq_handler(struct csio_hw *hw) +{ + int rv; + + if (csio_q_iqid(hw, hw->fwevt_iq_idx) == CSIO_MAX_QID) { + CSIO_INC_STATS(hw, n_int_stray); + return -EINVAL; + } + + rv = csio_wr_process_iq_idx(hw, hw->fwevt_iq_idx, + csio_process_fwevtq_entry, NULL); + return rv; +} + +/**************************************************************************** + * Entry points + ****************************************************************************/ + +/* Management module */ +/* + * csio_mgmt_req_lookup - Lookup the given IO req exist in Active Q. + * mgmt - mgmt module + * @io_req - io request + * + * Return - 0:if given IO Req exists in active Q. + * -EINVAL :if lookup fails. + */ +int +csio_mgmt_req_lookup(struct csio_mgmtm *mgmtm, struct csio_ioreq *io_req) +{ + struct list_head *tmp; + + /* Lookup ioreq in the ACTIVEQ */ + list_for_each(tmp, &mgmtm->active_q) { + if (io_req == (struct csio_ioreq *)tmp) + return 0; + } + return -EINVAL; +} + +#define ECM_MIN_TMO 1000 /* Minimum timeout value for req */ + +/* + * csio_mgmts_tmo_handler - MGMT IO Timeout handler. + * @data - Event data. + * + * Return - none. + */ +static void +csio_mgmt_tmo_handler(uintptr_t data) +{ + struct csio_mgmtm *mgmtm = (struct csio_mgmtm *) data; + struct list_head *tmp; + struct csio_ioreq *io_req; + + csio_dbg(mgmtm->hw, "Mgmt timer invoked!\n"); + + spin_lock_irq(&mgmtm->hw->lock); + + list_for_each(tmp, &mgmtm->active_q) { + io_req = (struct csio_ioreq *) tmp; + io_req->tmo -= min_t(uint32_t, io_req->tmo, ECM_MIN_TMO); + + if (!io_req->tmo) { + /* Dequeue the request from retry Q. */ + tmp = csio_list_prev(tmp); + list_del_init(&io_req->sm.sm_list); + if (io_req->io_cbfn) { + /* io_req will be freed by completion handler */ + io_req->wr_status = -ETIMEDOUT; + io_req->io_cbfn(mgmtm->hw, io_req); + } else { + CSIO_DB_ASSERT(0); + } + } + } + + /* If retry queue is not empty, re-arm timer */ + if (!list_empty(&mgmtm->active_q)) + mod_timer(&mgmtm->mgmt_timer, + jiffies + msecs_to_jiffies(ECM_MIN_TMO)); + spin_unlock_irq(&mgmtm->hw->lock); +} + +static void +csio_mgmtm_cleanup(struct csio_mgmtm *mgmtm) +{ + struct csio_hw *hw = mgmtm->hw; + struct csio_ioreq *io_req; + struct list_head *tmp; + uint32_t count; + + count = 30; + /* Wait for all outstanding req to complete gracefully */ + while ((!list_empty(&mgmtm->active_q)) && count--) { + spin_unlock_irq(&hw->lock); + msleep(2000); + spin_lock_irq(&hw->lock); + } + + /* release outstanding req from ACTIVEQ */ + list_for_each(tmp, &mgmtm->active_q) { + io_req = (struct csio_ioreq *) tmp; + tmp = csio_list_prev(tmp); + list_del_init(&io_req->sm.sm_list); + mgmtm->stats.n_active--; + if (io_req->io_cbfn) { + /* io_req will be freed by completion handler */ + io_req->wr_status = -ETIMEDOUT; + io_req->io_cbfn(mgmtm->hw, io_req); + } + } +} + +/* + * csio_mgmt_init - Mgmt module init entry point + * @mgmtsm - mgmt module + * @hw - HW module + * + * Initialize mgmt timer, resource wait queue, active queue, + * completion q. Allocate Egress and Ingress + * WR queues and save off the queue index returned by the WR + * module for future use. Allocate and save off mgmt reqs in the + * mgmt_req_freelist for future use. Make sure their SM is initialized + * to uninit state. + * Returns: 0 - on success + * -ENOMEM - on error. + */ +static int +csio_mgmtm_init(struct csio_mgmtm *mgmtm, struct csio_hw *hw) +{ + struct timer_list *timer = &mgmtm->mgmt_timer; + + init_timer(timer); + timer->function = csio_mgmt_tmo_handler; + timer->data = (unsigned long)mgmtm; + + INIT_LIST_HEAD(&mgmtm->active_q); + INIT_LIST_HEAD(&mgmtm->cbfn_q); + + mgmtm->hw = hw; + /*mgmtm->iq_idx = hw->fwevt_iq_idx;*/ + + return 0; +} + +/* + * csio_mgmtm_exit - MGMT module exit entry point + * @mgmtsm - mgmt module + * + * This function called during MGMT module uninit. + * Stop timers, free ioreqs allocated. + * Returns: None + * + */ +static void +csio_mgmtm_exit(struct csio_mgmtm *mgmtm) +{ + del_timer_sync(&mgmtm->mgmt_timer); +} + + +/** + * csio_hw_start - Kicks off the HW State machine + * @hw: Pointer to HW module. + * + * It is assumed that the initialization is a synchronous operation. + * So when we return afer posting the event, the HW SM should be in + * the ready state, if there were no errors during init. + */ +int +csio_hw_start(struct csio_hw *hw) +{ + spin_lock_irq(&hw->lock); + csio_post_event(&hw->sm, CSIO_HWE_CFG); + spin_unlock_irq(&hw->lock); + + if (csio_is_hw_ready(hw)) + return 0; + else + return -EINVAL; +} + +int +csio_hw_stop(struct csio_hw *hw) +{ + csio_post_event(&hw->sm, CSIO_HWE_PCI_REMOVE); + + if (csio_is_hw_removing(hw)) + return 0; + else + return -EINVAL; +} + +/* Max reset retries */ +#define CSIO_MAX_RESET_RETRIES 3 + +/** + * csio_hw_reset - Reset the hardware + * @hw: HW module. + * + * Caller should hold lock across this function. + */ +int +csio_hw_reset(struct csio_hw *hw) +{ + if (!csio_is_hw_master(hw)) + return -EPERM; + + if (hw->rst_retries >= CSIO_MAX_RESET_RETRIES) { + csio_dbg(hw, "Max hw reset attempts reached.."); + return -EINVAL; + } + + hw->rst_retries++; + csio_post_event(&hw->sm, CSIO_HWE_HBA_RESET); + + if (csio_is_hw_ready(hw)) { + hw->rst_retries = 0; + hw->stats.n_reset_start = jiffies_to_msecs(jiffies); + return 0; + } else + return -EINVAL; +} + +/* + * csio_hw_get_device_id - Caches the Adapter's vendor & device id. + * @hw: HW module. + */ +static void +csio_hw_get_device_id(struct csio_hw *hw) +{ + /* Is the adapter device id cached already ?*/ + if (csio_is_dev_id_cached(hw)) + return; + + /* Get the PCI vendor & device id */ + pci_read_config_word(hw->pdev, PCI_VENDOR_ID, + &hw->params.pci.vendor_id); + pci_read_config_word(hw->pdev, PCI_DEVICE_ID, + &hw->params.pci.device_id); + + csio_dev_id_cached(hw); + +} /* csio_hw_get_device_id */ + +/* + * csio_hw_set_description - Set the model, description of the hw. + * @hw: HW module. + * @ven_id: PCI Vendor ID + * @dev_id: PCI Device ID + */ +static void +csio_hw_set_description(struct csio_hw *hw, uint16_t ven_id, uint16_t dev_id) +{ + uint32_t adap_type, prot_type; + + if (ven_id == CSIO_VENDOR_ID) { + prot_type = (dev_id & CSIO_ASIC_DEVID_PROTO_MASK); + adap_type = (dev_id & CSIO_ASIC_DEVID_TYPE_MASK); + + if (prot_type == CSIO_FPGA) { + memcpy(hw->model_desc, + csio_fcoe_adapters[13].description, 32); + } else if (prot_type == CSIO_T4_FCOE_ASIC) { + memcpy(hw->hw_ver, + csio_fcoe_adapters[adap_type].model_no, 16); + memcpy(hw->model_desc, + csio_fcoe_adapters[adap_type].description, 32); + } else { + char tempName[32] = "Chelsio FCoE Controller"; + memcpy(hw->model_desc, tempName, 32); + + CSIO_DB_ASSERT(0); + } + } +} /* csio_hw_set_description */ + +/** + * csio_hw_init - Initialize HW module. + * @hw: Pointer to HW module. + * + * Initialize the members of the HW module. + */ +int +csio_hw_init(struct csio_hw *hw) +{ + int rv = -EINVAL; + uint32_t i; + uint16_t ven_id, dev_id; + struct csio_evt_msg *evt_entry; + + INIT_LIST_HEAD(&hw->sm.sm_list); + csio_init_state(&hw->sm, csio_hws_uninit); + spin_lock_init(&hw->lock); + INIT_LIST_HEAD(&hw->sln_head); + + /* Get the PCI vendor & device id */ + csio_hw_get_device_id(hw); + + strcpy(hw->name, CSIO_HW_NAME); + + /* Set the model & its description */ + + ven_id = hw->params.pci.vendor_id; + dev_id = hw->params.pci.device_id; + + csio_hw_set_description(hw, ven_id, dev_id); + + /* Initialize default log level */ + hw->params.log_level = (uint32_t) csio_dbg_level; + + csio_set_fwevt_intr_idx(hw, -1); + csio_set_nondata_intr_idx(hw, -1); + + /* Init all the modules: Mailbox, WorkRequest and Transport */ + if (csio_mbm_init(csio_hw_to_mbm(hw), hw, csio_hw_mb_timer)) + goto err; + + rv = csio_wrm_init(csio_hw_to_wrm(hw), hw); + if (rv) + goto err_mbm_exit; + + rv = csio_scsim_init(csio_hw_to_scsim(hw), hw); + if (rv) + goto err_wrm_exit; + + rv = csio_mgmtm_init(csio_hw_to_mgmtm(hw), hw); + if (rv) + goto err_scsim_exit; + /* Pre-allocate evtq and initialize them */ + INIT_LIST_HEAD(&hw->evt_active_q); + INIT_LIST_HEAD(&hw->evt_free_q); + for (i = 0; i < csio_evtq_sz; i++) { + + evt_entry = kzalloc(sizeof(struct csio_evt_msg), GFP_KERNEL); + if (!evt_entry) { + csio_err(hw, "Failed to initialize eventq"); + goto err_evtq_cleanup; + } + + list_add_tail(&evt_entry->list, &hw->evt_free_q); + CSIO_INC_STATS(hw, n_evt_freeq); + } + + hw->dev_num = dev_num; + dev_num++; + + return 0; + +err_evtq_cleanup: + csio_evtq_cleanup(hw); + csio_mgmtm_exit(csio_hw_to_mgmtm(hw)); +err_scsim_exit: + csio_scsim_exit(csio_hw_to_scsim(hw)); +err_wrm_exit: + csio_wrm_exit(csio_hw_to_wrm(hw), hw); +err_mbm_exit: + csio_mbm_exit(csio_hw_to_mbm(hw)); +err: + return rv; +} + +/** + * csio_hw_exit - Un-initialize HW module. + * @hw: Pointer to HW module. + * + */ +void +csio_hw_exit(struct csio_hw *hw) +{ + csio_evtq_cleanup(hw); + csio_mgmtm_exit(csio_hw_to_mgmtm(hw)); + csio_scsim_exit(csio_hw_to_scsim(hw)); + csio_wrm_exit(csio_hw_to_wrm(hw), hw); + csio_mbm_exit(csio_hw_to_mbm(hw)); +}