From patchwork Wed Nov 14 16:59:09 2012 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Subject: [1/1] powerpc: dts: virtex440: add ethernet phy to virtex440-ml507 Date: Wed, 14 Nov 2012 06:59:09 -0000 From: Gernot Vormayr X-Patchwork-Id: 198966 Message-Id: <1352912349-15538-1-git-send-email-gvormayr@gmail.com> To: Grant Likely , Benjamin Herrenschmidt , Paul Mackerras Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org, Gernot Vormayr This adds the marvel phy which is present on the ml507 board. Without this ethtool causes kernel-oopses. Tested on ml507 board. Signed-off-by: Gernot Vormayr --- arch/powerpc/boot/dts/virtex440-ml507.dts | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/powerpc/boot/dts/virtex440-ml507.dts b/arch/powerpc/boot/dts/virtex440-ml507.dts index 52d8c1a..fc7073b 100644 --- a/arch/powerpc/boot/dts/virtex440-ml507.dts +++ b/arch/powerpc/boot/dts/virtex440-ml507.dts @@ -272,6 +272,12 @@ xlnx,temac-type = <0>; xlnx,txcsum = <1>; xlnx,txfifo = <0x1000>; + phy-handle = <&phy7>; + clock-frequency = <100000000>; + phy7: phy@7 { + compatible = "marvell,88e1111"; + reg = <7>; + } ; } ; } ; IIC_EEPROM: i2c@81600000 {