Patchwork [U-Boot,v3,12/13] mx35pdk: Add support for OTG

login
register
mail settings
Submitter Benoît Thébaudeau
Date Nov. 13, 2012, 7:58 p.m.
Message ID <127772676.1238971.1352836705328.JavaMail.root@advansee.com>
Download mbox | patch
Permalink /patch/198771/
State Awaiting Upstream
Delegated to: Stefano Babic
Headers show

Comments

Benoît Thébaudeau - Nov. 13, 2012, 7:58 p.m.
Add support for the OTG port on the mx35pdk Personality board.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Tested-by: Stefano Babic <sbabic@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Marek Vasut <marex@denx.de>
---
Changes for v2:
 - Tested by Stefano.
Changes for v3:
 - Fix lines over 80 characters.

 .../board/freescale/mx35pdk/lowlevel_init.S        |    4 ++++
 .../board/freescale/mx35pdk/mx35pdk.c              |   21 ++++++++++++++++++++
 .../include/configs/mx35pdk.h                      |   14 +++++++++++++
 3 files changed, 39 insertions(+)

Patch

diff --git u-boot-usb-76454b2.orig/board/freescale/mx35pdk/lowlevel_init.S u-boot-usb-76454b2/board/freescale/mx35pdk/lowlevel_init.S
index 698c4cf..6f4d4e0 100644
--- u-boot-usb-76454b2.orig/board/freescale/mx35pdk/lowlevel_init.S
+++ u-boot-usb-76454b2/board/freescale/mx35pdk/lowlevel_init.S
@@ -178,6 +178,10 @@ 
 	orr r1, r1, #0x00000C00
 	orr r1, r1, #0x00000003
 	str r1, [r0, #CLKCTL_CGR1]
+
+	ldr r1, [r0, #CLKCTL_CGR2]
+	orr r1, r1, #0x00C00000
+	str r1, [r0, #CLKCTL_CGR2]
 .endm
 
 .macro setup_sdram
diff --git u-boot-usb-76454b2.orig/board/freescale/mx35pdk/mx35pdk.c u-boot-usb-76454b2/board/freescale/mx35pdk/mx35pdk.c
index 7cb6b30..4fa2c27 100644
--- u-boot-usb-76454b2.orig/board/freescale/mx35pdk/mx35pdk.c
+++ u-boot-usb-76454b2/board/freescale/mx35pdk/mx35pdk.c
@@ -97,6 +97,26 @@  static void setup_iomux_spi(void)
 	mxc_request_iomux(MX35_PIN_CSPI1_SCLK, MUX_CONFIG_SION);
 }
 
+static void setup_iomux_usbotg(void)
+{
+	int in_pad, out_pad;
+
+	/* Set up pins for USBOTG. */
+	mxc_request_iomux(MX35_PIN_USBOTG_PWR,
+			  MUX_CONFIG_SION | MUX_CONFIG_FUNC);
+	mxc_request_iomux(MX35_PIN_USBOTG_OC,
+			  MUX_CONFIG_SION | MUX_CONFIG_FUNC);
+
+	in_pad = PAD_CTL_DRV_3_3V | PAD_CTL_HYS_SCHMITZ | PAD_CTL_PKE_ENABLE |
+		PAD_CTL_PUE_PUD | PAD_CTL_100K_PD | PAD_CTL_ODE_CMOS |
+		PAD_CTL_DRV_NORMAL | PAD_CTL_SRE_SLOW;
+	out_pad = PAD_CTL_DRV_3_3V | PAD_CTL_HYS_CMOS | PAD_CTL_PKE_NONE |
+		PAD_CTL_ODE_CMOS | PAD_CTL_DRV_NORMAL | PAD_CTL_SRE_SLOW;
+
+	mxc_iomux_set_pad(MX35_PIN_USBOTG_PWR, out_pad);
+	mxc_iomux_set_pad(MX35_PIN_USBOTG_OC, in_pad);
+}
+
 static void setup_iomux_fec(void)
 {
 	int pad;
@@ -188,6 +208,7 @@  int board_early_init_f(void)
 	__raw_writel(readl(&ccm->rcsr) | MXC_CCM_RCSR_NFC_FMS, &ccm->rcsr);
 
 	setup_iomux_i2c();
+	setup_iomux_usbotg();
 	setup_iomux_fec();
 	setup_iomux_spi();
 
diff --git u-boot-usb-76454b2.orig/include/configs/mx35pdk.h u-boot-usb-76454b2/include/configs/mx35pdk.h
index 826c912..69b7d23 100644
--- u-boot-usb-76454b2.orig/include/configs/mx35pdk.h
+++ u-boot-usb-76454b2/include/configs/mx35pdk.h
@@ -110,6 +110,8 @@ 
 #define CONFIG_NET_RETRY_COUNT	100
 #define CONFIG_CMD_DATE
 
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
 #define CONFIG_CMD_MMC
 #define CONFIG_DOS_PARTITION
 #define CONFIG_EFI_PARTITION
@@ -242,6 +244,18 @@ 
 #define CONFIG_MXC_NAND_HWECC
 #define CONFIG_SYS_NAND_LARGEPAGE
 
+/* EHCI driver */
+#define CONFIG_USB_EHCI
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	1
+#define CONFIG_EHCI_IS_TDI
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_USB_EHCI_MXC
+#define CONFIG_MXC_USB_PORT	0
+#define CONFIG_MXC_USB_FLAGS	(MXC_EHCI_INTERFACE_DIFF_UNI | \
+				 MXC_EHCI_POWER_PINS_ENABLED | \
+				 MXC_EHCI_OC_PIN_ACTIVE_LOW)
+#define CONFIG_MXC_USB_PORTSC	(MXC_EHCI_UTMI_16BIT | MXC_EHCI_MODE_UTMI)
+
 /* mmc driver */
 #define CONFIG_MMC
 #define CONFIG_GENERIC_MMC