diff mbox

[U-Boot] omap3: Add a few comments to "#endif"s for readability.

Message ID alpine.DEB.2.02.1211131255490.6783@oneiric
State Accepted
Delegated to: Tom Rini
Headers show

Commit Message

Robert P. J. Day Nov. 13, 2012, 5:57 p.m. UTC 
No functional changes, just more comments for readability when a
preprocessor check spans more than a few lines, and for consistency.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>

---



rday

Comments

Tom Rini Dec. 10, 2012, 8:15 p.m. UTC | #1 
On Tue, Nov 13, 2012 at 07:57:54AM -0000, Robert P. J. Day wrote:

> No functional changes, just more comments for readability when a
> preprocessor check spans more than a few lines, and for consistency.
> 
> Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>

Applied to u-boot-ti/master, thanks!
diff mbox

Patch

diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
index f3cd81a..89c587e 100644
--- a/arch/arm/cpu/armv7/omap3/board.c
+++ b/arch/arm/cpu/armv7/omap3/board.c
@@ -478,7 +478,7 @@  void omap3_outer_cache_disable(void)
 	 */
 	omap3_update_aux_cr(0, 0x2);
 }
-#endif
+#endif /* !CONFIG_SYS_L2CACHE_OFF */

 #ifndef CONFIG_SYS_DCACHE_OFF
 void enable_caches(void)
@@ -486,4 +486,4 @@  void enable_caches(void)
 	/* Enable D-cache. I-cache is already enabled in start.S */
 	dcache_enable();
 }
-#endif
+#endif /* !CONFIG_SYS_DCACHE_OFF */
diff --git a/arch/arm/cpu/armv7/omap3/mem.c b/arch/arm/cpu/armv7/omap3/mem.c
index 2fe5ac7..e2894a8 100644
--- a/arch/arm/cpu/armv7/omap3/mem.c
+++ b/arch/arm/cpu/armv7/omap3/mem.c
@@ -47,9 +47,9 @@  static const u32 gpmc_m_nand[GPMC_MAX_REG] = {
 #define GPMC_CS 0
 #else
 #define GPMC_CS 1
-#endif
+#endif /* CONFIG_ENV_IS_IN_NAND */

-#endif
+#endif /* CONFIG_CMD_NAND */

 #if defined(CONFIG_CMD_ONENAND)
 static const u32 gpmc_onenand[GPMC_MAX_REG] = {
@@ -65,9 +65,9 @@  static const u32 gpmc_onenand[GPMC_MAX_REG] = {
 #define GPMC_CS 0
 #else
 #define GPMC_CS 1
-#endif
+#endif /* CONFIG_ENV_IS_IN_ONENAND */

-#endif
+#endif /* CONFIG_CMD_ONENAND */

 /********************************************************
  *  mem_ok() - test used to see if timings are correct