Patchwork [v2,6/6] Add config file for the snowball board

login
register
mail settings
Submitter Gregory Hermant
Date Nov. 12, 2012, 5:41 p.m.
Message ID <1352742102-19010-7-git-send-email-gregory.hermant@calao-systems.com>
Download mbox | patch
Permalink /patch/198428/
State Superseded
Headers show

Comments

Gregory Hermant - Nov. 12, 2012, 5:41 p.m.
Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
---
 configs/calao_snowball_defconfig |   49 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)
 create mode 100644 configs/calao_snowball_defconfig
Arnout Vandecappelle - Nov. 12, 2012, 9:53 p.m.
On 11/12/12 18:41, Gregory Hermant wrote:
>
> Signed-off-by: Gregory Hermant<gregory.hermant@calao-systems.com>
> ---
>   configs/calao_snowball_defconfig |   49 ++++++++++++++++++++++++++++++++++++++
>   1 file changed, 49 insertions(+)
>   create mode 100644 configs/calao_snowball_defconfig
>
> diff --git a/configs/calao_snowball_defconfig b/configs/calao_snowball_defconfig
> new file mode 100644
> index 0000000..e5e67bf
> --- /dev/null
> +++ b/configs/calao_snowball_defconfig
> @@ -0,0 +1,49 @@
> +BR2_arm=y
> +BR2_cortex_a9=y
> +BR2_GCC_VERSION_4_7_X=y
> +# BR2_SOFT_FLOAT is not set
> +BR2_TOOLCHAIN_BUILDROOT_LARGEFILE=y
> +BR2_TOOLCHAIN_BUILDROOT_INET_IPV6=y
> +BR2_TOOLCHAIN_BUILDROOT_INET_RPC=y
> +BR2_TOOLCHAIN_BUILDROOT_LOCALE=y
> +BR2_TOOLCHAIN_BUILDROOT_CXX=y
> +BR2_VFP_FLOAT=y
> +BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
> +BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA2"
> +BR2_PACKAGE_BUSYBOX_CONFIG="board/calao/snowball/busybox-1.20.x.config"
> +BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
> +BR2_PACKAGE_BZIP2=y
> +BR2_PACKAGE_FBSET=y
> +BR2_PACKAGE_FBTERM=y
> +BR2_PACKAGE_HDMISERVICE=y
> +BR2_PACKAGE_MINICOM=y
> +BR2_PACKAGE_LUA=y
> +BR2_PACKAGE_OPENSSL=y
> +BR2_PACKAGE_SQLITE=y
> +BR2_PACKAGE_JPEG=y
> +BR2_PACKAGE_LIBPNG=y
> +BR2_PACKAGE_LIBUNGIF=y
> +BR2_PACKAGE_LIBELF=y
> +BR2_PACKAGE_PCRE=y
> +BR2_PACKAGE_LIBXML2=y
> +BR2_PACKAGE_SNOWBALL_INIT=y
> +BR2_PACKAGE_IW=y
> +BR2_PACKAGE_WGET=y

  I have the feeling that I've said this before, but: are all of these
really needed?  I can't imagine why you'd want anything that is also
already provided by busybox; I don't see why you'd need minicom or lua
in a minimal configuration; all the libraries make no sense if there
no package using them, but then that package should select them.

  For the wireless packages below I'm willing to make an exception
(though I'm not sure why the lib is needed).

> +BR2_PACKAGE_WIRELESS_TOOLS=y
> +BR2_PACKAGE_WIRELESS_TOOLS_LIB=y
> +BR2_PACKAGE_WPA_SUPPLICANT=y
> +BR2_PACKAGE_WPA_SUPPLICANT_EAP=y
> +BR2_PACKAGE_WPA_SUPPLICANT_CLI=y
> +BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE=y
> +BR2_PACKAGE_WPA_SUPPLICANT_AP_SUPPORT=y
> +BR2_PACKAGE_WPA_SUPPLICANT_WPS=y
> +BR2_TARGET_ROOTFS_TAR_GZIP=y

  I thought the idea was to put it on an SD card?  Then it makes more
sense to build an ext2 fs, no?


  Regards,
  Arnout

> +BR2_TARGET_UBOOT=y
> +BR2_TARGET_UBOOT_BOARDNAME="snowball"
> +BR2_LINUX_KERNEL=y
> +BR2_LINUX_KERNEL_CUSTOM_GIT=y
> +BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://igloocommunity.org/git/kernel/igloo-kernel.git"
> +BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="stable-linux-ux500-3.4"
> +BR2_LINUX_KERNEL_PATCH="board/calao/snowball/"
> +BR2_LINUX_KERNEL_DEFCONFIG="u8500"
> +BR2_LINUX_KERNEL_INSTALL_TARGET=y

Patch

diff --git a/configs/calao_snowball_defconfig b/configs/calao_snowball_defconfig
new file mode 100644
index 0000000..e5e67bf
--- /dev/null
+++ b/configs/calao_snowball_defconfig
@@ -0,0 +1,49 @@ 
+BR2_arm=y
+BR2_cortex_a9=y
+BR2_GCC_VERSION_4_7_X=y
+# BR2_SOFT_FLOAT is not set
+BR2_TOOLCHAIN_BUILDROOT_LARGEFILE=y
+BR2_TOOLCHAIN_BUILDROOT_INET_IPV6=y
+BR2_TOOLCHAIN_BUILDROOT_INET_RPC=y
+BR2_TOOLCHAIN_BUILDROOT_LOCALE=y
+BR2_TOOLCHAIN_BUILDROOT_CXX=y
+BR2_VFP_FLOAT=y
+BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA2"
+BR2_PACKAGE_BUSYBOX_CONFIG="board/calao/snowball/busybox-1.20.x.config"
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_BZIP2=y
+BR2_PACKAGE_FBSET=y
+BR2_PACKAGE_FBTERM=y
+BR2_PACKAGE_HDMISERVICE=y
+BR2_PACKAGE_MINICOM=y
+BR2_PACKAGE_LUA=y
+BR2_PACKAGE_OPENSSL=y
+BR2_PACKAGE_SQLITE=y
+BR2_PACKAGE_JPEG=y
+BR2_PACKAGE_LIBPNG=y
+BR2_PACKAGE_LIBUNGIF=y
+BR2_PACKAGE_LIBELF=y
+BR2_PACKAGE_PCRE=y
+BR2_PACKAGE_LIBXML2=y
+BR2_PACKAGE_SNOWBALL_INIT=y
+BR2_PACKAGE_IW=y
+BR2_PACKAGE_WGET=y
+BR2_PACKAGE_WIRELESS_TOOLS=y
+BR2_PACKAGE_WIRELESS_TOOLS_LIB=y
+BR2_PACKAGE_WPA_SUPPLICANT=y
+BR2_PACKAGE_WPA_SUPPLICANT_EAP=y
+BR2_PACKAGE_WPA_SUPPLICANT_CLI=y
+BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE=y
+BR2_PACKAGE_WPA_SUPPLICANT_AP_SUPPORT=y
+BR2_PACKAGE_WPA_SUPPLICANT_WPS=y
+BR2_TARGET_ROOTFS_TAR_GZIP=y
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="snowball"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://igloocommunity.org/git/kernel/igloo-kernel.git"
+BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="stable-linux-ux500-3.4"
+BR2_LINUX_KERNEL_PATCH="board/calao/snowball/"
+BR2_LINUX_KERNEL_DEFCONFIG="u8500"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y